sensors to BTS connections Than conform with OM CR how many alarms are working on BTS After that cut alarm cable from BTS end BTS alarm cable connect with SDR alarm cable following color scheme Than alarm test on SDR
Conform
during SDR swap
SDR to BTS color scheme
Phase I Outdoor site
Phase
I Outdoor site Alarms detail
Precautions
Conform
during SDR swap
sensors to BTS connections
Than conform with OM CR how many alarms are working on BTS BTS alarm cable and SDR alarm cable color scheme is same Sensors alarm cable direct connect with SDR alarm cable same like BTS alarm cable Than alarm test on SDR
Outdoor Solar site
Phase
I Outdoor Solar site
Solar site alarm template is change to other sites Solar site have seven alarm All sensors are connect with GSU GSU out put connect with BTS or SDR Outdoor BTS and SDR alarm cable color combination are same
Outdoor SDR solar site Alarm detail and connection
Precautions
Conform
during SDR swap
GSU output to BTS connections Than conform with OMCR how many alarms are working on BTS BTS alarm cable and SDR alarm cable color scheme is same GSU output cables connect with SDR alarm cable same like BTS alarm cable Than alarm test on SDR
Phase 0 Indoor sites
Phase
0 Indoor site
Phase 0 site alarm template is same like Phase I sites BTS alarm cable color combination not same with Phase I cable All sensors are connect with GSUR GSUR out put connect with BTS or SDR
Phase
0 Indoor site Alarms detail
Precautions
Conform
during SDR swap
sensors to BTS connections
Than conform with OM CR how many alarms are working on BTS After that cut alarm cable from BTS end BTS alarm cable connect with SDR alarm cable following color scheme Than alarm test on SDR
SDR to BTS color scheme
Phase II (MISU)
Precautions
First
Conform
during SDR swap
conform with OMCR how many alarms are working MISU MISU E1 connect with BTS P CM
number
After swap conform SDR PCM number and connect with MISU Than alarm test on SDR