Instruction for WRC-107 analysis for Nozzles (if using PV Elite)
Do not print this sheet, it contains only information Note No te::
as how how to to anal analy yse noz nozzl zle e of a pres pressu sure re ves vesse sell for given loadings INPUTS INPUT CELLS (UNLOCKED) CALCULATIONS BY PROGRAM RESULTS
STEPS
1 Input values in blue cells ------> 2 Resu Results lts
cells
are shown for eve every ry ite item m at end of the she sheet et
Fig. Nozzle on Cylinderical Shell
3. Paste Data from PV Elite (manually) 4. Provide input data in " Input & Calculations" 5. Go to Table 1. Copy yellow portion to PV Elite word file 6. Go to Table 2. Copy yellow portion to PV Elite word file
Circumferential Membrane Stresses Check Au or Al Bu or Bl Cu or Cl Du or Dl 2
2
0
1
0
0
-2
2
-8
8
1
0
Longitudinal Membrane Stress check Au or Al Bu or Bl Cu or Cl Du or Dl 1
1
2
4
0
0
-4
2
-3
3
0
0
Max. Stress Intensity =
435 MPa
WRC CALCULATIONS FOR NOZZLE (AT ATTACHMENT JUNCTION)
Inputs Design Pressure Iside Radius of Cylinderical Shell Thickness of Shell Corrosion Allowance Thickness of Pad S.I. Allowable For Nozzle Material
