IMPACT 3.0
Saturday, 22 October 2016
214/Repair/FE, 214/Repair/FE, D7F340, EBR-CBJ3/Valves and JAK, adjust
FE
129405484
Saturday, 12 June 2010
21421-3
21421-3 Valves and JAK, adjust Note: As the pictures in the service literature are used for more than one variant, some details can differ in respect of the vehicle you are working with. The essential information information in the illustrations is, however, always correct. Special tools: 88800014, 885812 1
A = 88800014 88800014 Remove the plug at the flywheel. Fit cranking tool (A). Special tools: 88 88800 80001 014 4 , 88 8858 5812 12 2
COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
1/6
IMPACT 3.0
Saturday, 22 October 2016
Crank the flywheel until the piston in No.1 cylinder is at TDC and its exhaust and inlet valves overlap on cylinder No. 1. Note: No. 1 cylinder is closest to the flywheel.
Special tools: 88800014 3
COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2/6
IMPACT 3.0
Saturday, 22 October 2016
A = 885812 Adjust the inlet valves for cylinders 3, 5 and 6 and the exhaust valves for cylinders 2, 4 and 6. Undo the locknut on the adjuster screw. Screw down the adjuster screw to reduce the play to zero. Put a protractor on the valve adjuster screw. Zero the protractor. Screw back the adjuster screw. Check the number of degrees in Specifications . Torque tighten the locknut according to the specifications with an open socket. Hold the adjusting screw still to prevent rotation while torque tightening. Special tools: 885812 4 Adjust the clearance for the JAK piston on cylinders 2, 4 and 6 according to step 5. 5 COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3/6
IMPACT 3.0
Saturday, 22 October 2016
Loosen the lock nut on the piston adjustment screw. Screw down the adjustment screw until the clearance is zero. Screw back the Allen screw according according to Specifications . 6 Crank the flywheel until the exhaust and inlet valves overlap on cylinder 6. Special tools: 88800014 7
COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
4/6
IMPACT 3.0
Saturday, 22 October 2016
A = 885812 Adjust the inlet valves for cylinders 1, 2 and 4 and the exhaust valves for cylinders 1, 3 and 5 according to step 3. Special tools: 885812 8 Adjust the clearance for the JAK piston on cylinders 1, 3 and 5 according to step 9. Note: No. 1 cylinder is closest to the flywheel. 9
COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
5/6
IMPACT 3.0
Saturday, 22 October 2016
Loosen the lock nut on the piston adjustment screw. Screw down the adjustment screw until the clearance is zero. Screw back the Allen screw according to Specifications . 10 Remove cranking tool 88800014 and refit the plug.
COPYRIGHT © Copyright Volvo Parts C orporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
6/6
