Useful Commands BSC&RNC_Troubleshoot

BSC COMMANDS 

Verifying the Abis interface (Abis over TDM) 

Verifying the Control Plane on the Abis Interface (DSP LAPDLNK)



Verifying he timeslot status of the Abis interface ( DSP ABISTS) 

To query the Subrack No., Slot No., and Port No. of the timeslots to be verified, run the MML command (LST BTSCONNECT)







Verifying the Status of Cells and Channels ( DSP BTSSTAT)

Verifying the Abis interface (Abis over IP) 

Verifying the Control Plane on the Abis Interface (DSP LAPDLNK)



Verifying the User Plane on the Abis Interface ( DSP ADJNODE & DSP IPPATH)



Verifying the Status of the Cells and Channels ( DSP BTSSTAT)

Verifying the A interface (A over TDM) 



Verifying the Control Plane on the A Interface 

DSP MTP2LNK



DSP MTP3LNK



DSP SSN



DSP N7DPC

Verifying the User Plane on the A Interface ( DSP ACIC) 

To query the OPC Index and DPC Group Index of the E1/T1 to be verified on the A interface, run the MML command LST AE1T1.



Verifying the Gb interface (Gb over IP) 

Verifying the status of the Network Service Virtual Link ( DSP NSVL) 

To query the configuration of the local or remote NSVL to be verified, run the MML command LST NSVLLOCAL or LST NSVLREMOTE.



Verifying the status of the IP Route ( DSP GBIPROUTE)



Verifying the SIG BSSGP Virtual Connection (SIGBVC) status of the Network Service Entity (DSP SIGBVC & DSP PTPBVC) 

To query the configuration of the NSE to be verified, run the MML command LST NSE



Verifying the Ater Interface 

Verifying the Status of Timeslots on the Ater interface. ( DSP ATERTS) 

To query the Ater connection path index and ID of BSC in TC Pool of the E1/T1 to be verified on the Ater interface, run the MML command LST ATERE1T1.



If the TCS is configured remotely, run the MML command DSP ATERSL to query whether the Ater signaling link is normal.

RNC COMMANDS



Verifying the Iub Interface (over ATM) 

Verifying the Control Plane on the Iub Interface ( DSP SAALLNK & DSP UIUBCP & DSP ADJNODE)





Verifying the User Plane on the Iub Interface ( DSP AAL2PATH)



Verifying the Cell Setup ( DSP UCELL)

Verifying the Iu-CS Interface (over ATM) 

Verifying the Control Plane on the Iu-CS Interface

 –  DSP SAALLNK  –  DSP MTP3LNK  –  DSP SSN  –  DSP N7DPC  –  DSP ADJNODE  –  LST GCNNODE or LST UCNNODE 



Verifying the User Plane on the Iu-CS Interface ( DSP AAL2PATH)

Verifying the Iu-CS Interface (over IP) 

Verifying the Control Plane on the Iu-CS Interface

 –  DSP SCTPLNK  –  DSP M3LNK  –  DSP SSN  –  DSP N7DPC  –  DSP ADJNODE  –  LST GCNNODE or LST UCNNODE 

Verifying the User Plane on the Iu-CS Interface ( DSP IPPATH)



Verifying the Iu-PS Interface (over IP) 

Verifying the Control Plane on the Iu-PS Interface

 –  DSP SCTPLNK  –  DSP M3LNK  –  DSP SSN  –  DSP N7DPC  –  DSP ADJNODE  –  LST GCNNODE or LST UCNNODE 

Verifying the User Plane on the Iu-PS Interface ( DSP IPPATH)