Tutorial - Routing Pipes and Tubes in Solidworks

TUTORIAL: Routing - Pipes and Tubes in Solidworks SOLIDWORKS tubes solidworks solidworks pipes  pipes routing tutorial

By Victor By  Victor Bonavarte 6779 on 12 Dec 08:51 5 answers 11701 views 1 comment

Simple tutorial in making the pipe and connect it to the flange

Added images

Question unclear or needs more details before answering?  Comment (1)

5 answers



Victor Bonavarte 6779

over 1 year ago

o

TUTORIAL: Routing - Pipes and Tubes in Solidworks

2. Step 1 I will make it in assembly

3. Step 2 The first thing you should do. select Tools - Add Ins - and select solidworks Routing

4. Step 3 and select a design library - Routing - P iping - flange - choose on e, here I use the slip on weld flange.

5. Step 4 and select the configuration you want. here I am using the first

6. Step 5 make your settings. then ok.

7. Step 6 and will appear as in the picture, you can slide the line according your dimensions ..

8. Step 7 after that the result will be like this, and forming pipe

9. Step 8 then I added a flange back

10. Step 9 then I added a back flange valves in part.

11. Step 10 the same as that to step 6, and then click on flange face - right click and select add route.

12. Step 11 and will display the image like this, then I will make the line manually, because it does not use the " auto route"

13. Step 12 The line that I created manually. and it can do to suit your needs ..

14. Step 13 and after the exit, the result is like this. I hope this tutorial is useful for yo u to learn .. thank you.