Centre lathe machine can be used to make required shapes of metal object by subject to various types of metal cutting operations. Turning is most comm...
a full turning report for mechanical engineersFull description
Do give me some creditsFull description
huhu
Full description
chem
Mechanism
Full description
aFull description
lab reportFull description
Full description
Soil Lab
habutFull description
This is a labreport on chemical kinetics... From this labreport students of chemical engineering and chemistry students can get a huge advantage in working in their lab..Full description
gymnospermFull description
lab report report labFull description
fFull description
ferroceneFull description
wbm basic mud labFull description
TURNING LAB REPORT
Abstract In a general, centre lathe machine can be used to make required shapes of metal object by subject to various types of metal metal cutting operations. Turning Turning is most common operation for the metal cutting. Lathe machine are used various types of tools for turning, tread cutting operations. As to discuss this metal piece holding it’s one end by the machine chuck stock and other and holding by the tail stock to guide the !ork piece for smooth rotation !ithout vibration. "or shorter length of round bar bar !ork pieces pieces essentially not required tail stock support,but longer !ork pieces it is must. In a lathe machine turning operation it is most common and it is use to reduce diameters !ith turning tool. #y feeding turning tool as desired values reduce the diameters by chipping out material from the !ork piece. $rior to the turning operation it is essentially required to set the machine as per the length of operation. These are different types of lathe machines.These are semi and fully automatic lathe and Te%sset Te%sset lathes. The lathe machine capacity defined as to centre to centre diameter and si&e of the !ork piece diameter !hich the machine can be hold.
