AVEVA Marine (12.1) Hull Detailed DesignFull description
Descrição: AVEVA Marine (12.1) Hull Detailed Design
hull design in napa
Descripcion y funcionamiento de una celda HullDescripción completa
Descrição: AVEVA
TM-2100 AVEVA Marine (12 Series) Hull and Outfitting Drafting Rev 6.0Full description
AVEVA PIPELINE GUIDE MANUAL
double hullFull description
Full description
Electroquimica
Hull Solutions Manual 7e
AVEVA Marine (12.1) Hull Detailed Design Curved Hull Modelling (TM-2103)
11.5.1 Dimensioning Curved Panel Views A curved panel view can be dimensioned automatically to provide a remarking table. Use Hull Tools>Dimensioning, the system will prompt: Indicate objects to measure from Indicate 1 or more objects, e.g. an outer seam or butt, from which the dimensions are to be calculated, then press OC. The system will then prompt: Indicate objects to measure to Indicate 1 or more objects, e.g. internal seams or stiffeners, to measure to then press OC. The system will then prompt: Indicate objects to measure along Indicate the curves to calculate the distance to the selected objects along then press OC. The system will then prompt: Indicate view to draw dimensions in Indicate the view to which the dimensions will be added, generally but not necessarily the curved panel view. The system will then prompt: Select Yes to draw a dimension curve along the selected curve being measured. Select No to add only a dimension arrow (this is the recommended option).
