The Working Principle of The Screw Air Compressor Author:Denair Author:Denair Compressor
Date: 2011-3-21
From: http://www.denaircompressor.net/
The working principle of the screw air compressor First, an overview of screw air compressor Injection screw air compressor is a single-stage twin-screw compressor, efficient use of belts (or coupling) drive, turn the compressed air driving the host, the host by injection compression chamber for cooling and lubrication, compression chamber discharge air and oil mixture through the coarse and fine separation of two, will air in the oil separated from the resulting clean air. Twinscrew air compressor with excellent reliability, the unit light weight, low vibration, low noise, easy operation, the vulnerability of small, high operating efficiency of its greatest strengths. Second, the host compressor screw air compressor works the core component is the compressor host, is a positive displacement compressor, compressed air is installed in the chassis by the meshing of the yin and yang to each other parallel to the rotor of the alveolar The volume change achieved. Vice in the rotor with with the the chassis chassis and and its precision precisi on rotation rotation of the the rotor within within the the alveolar alveolar gas continuously generated between the cyclical changes in the volume along the rotor axis into the discharge side by the suction side to complete the inhalation, compression, exhaust three working process. Therefore, the twin-screw rotor profile technology determines the positioning screw air compressor grade. (For the type of wireless technology see Shen Xingjian Home "twin-screw air compressor core technology" section.) compressor
Third, the twin-screw air compressor work flow intake filter air through the dust in the atmosphere or after removing impurities from entering the compressor inlet control valves host, in the compression process and the cooling oil sprayed into Shanghai Denair Compressor Co., Ltd.
the mix , the mixture of compressed gas from the compression chamber into the gas separation tank, this time compressed exhaust gas through the oil crash, interception, gravity, most of the oil medium is separated off, and then refined into oil and gas separator of the Second times separated by less oil content of compressed air, when air is compressed to the required pressure value, the minimum pressure valve opens, exhaust air to the cooler to cool down, and finally into using the system. compressor
From: compressor--screw compressor--air compressor
Shanghai Denair Compressor Co., Ltd.