Close Window
Assessment System 1. Assessment Selection
2. Assessment Settings
3. Take Assessment
Take Assessment - DRSEnt Chapter 2 - CCNA Discovery: Introducing Routing and Switching in the Enterprise (Version 4.0)
Time Remaining:
1
Which two items protect a corporate network against malicious attacks at the enterprise edge ? (Choose two. point of demarcation IP security (IPSec) Data Service Unit (DSU) intrusion prevention system (IPS) intrusion detection system (IDS)
2
A DoS attack crippled the daily operations of a large company for 8 hours. Which two options could be implemented by the network administrator to possibly prevent such an attack in the future? (Choose two.) install security devices with IDS and IPS at the enterprise edge reset all user passwords every 30 days filter packets based on IP address, traffic pattern, and protocol deny external workers VPN access to internal resources ensure critical devices are physically secure and placed behind the demarc
3
Which three items would be found in a NOC? (Choose three.) raised floors all wireless access points network monitoring station departmental printers customer workstations data storage devices
4
Which two situations require a network administrator to use out-of-band management to change a router configuration? (Choose two.)
Network links to the router are down. No Telnet password has been configured on the router. The administrator can only connect to the router using SSH. The network interfaces of the router are not configured with IP addresses. Company security policy requires that only HTTPS be used to connect to routers. 5
A network administrator must define specific business processes to implement if a catastrophic disaster prev a company from performing daily business routines. Which portion of the network documentation is the administrator defining? business security plan business continuity plan network solvency plan service level agreement network maintenance plan
6
What information can an administrator learn using the show version command? Cisco IOS filename configured routing protocol status of each interface IP addresses of all interfaces
7
It is crucial that network administrators be able to examine and configure network devices from their homes. Which two approaches allow this connectivity without increasing vulnerability to external attacks? (Choose two.) Configure a special link at the POP to allow external entry from the home computer. Set up VPN access between the home computer and the network. Install a cable modem in the home to link to the network. Configure ACLs on the edge routers that allow only authorized users to access management ports on network devices. Configure a server in the DMZ with a special username and password to allow external access.
8
Which two router parameters can be set from interface configuration mode? (Choose two.) IP address Telnet password hostname console password subnet mask enable secret password
9
A network administrator has just inserted a new WIC2T controller into the first available slot of an 1841 rou
The administrator needs to configure the first serial interface of this new controller. Which interface should used? s0/0/0 s0/0/1 s1/1/0 s1/0/1 s0/1/1 10 Which two statements are true about a network operations center (NOC)? (Choose two.) Most NOCs only have tower servers or desktop servers that provide high-speed storage capabilities for thousands of clients. A NOC is typically used only to monitor and maintain the most critical network components.
Because access is secured by firewalls, backup systems are not required in a NOC . Routers, high-speed switches, and servers are located within a NOC. High-speed and high-capacity data storage are important aspects of a NOC. 11 When searching for information about authentication methods and usernames of company personnel, where a network administrator look? Business Continuity Plan
Business Security Plan Network Maintenance Plan Service Level Agreement 12 Which two pieces of information are documented in a logical topology map? (Choose two.) physical cabling
service level agreements IP addressing IDF location group usage information facility floor plans 13 A network manager wants to have processes in place to ensure that network upgrades do not affect business operations. What will the network manager create for this purpose? business security plan
business continuity plan service level agreement network maintenance plan 14 An investment company has multiple servers that hold mission critical data. They are worried that if somethi happens to these servers, they will lose this valuable information. Which type of plan is needed for this com
to help minimize loss in the event of a server crash? business security business continuity network maintenance service level agreement 15 What type of connection point is a point of presence (POP)? between a client and a host
between two local networks between a computer and a switch between an ISP and an Enterprise network
Showing 1 of 2
Page:
1
Next>
Close Window All contents copyright 1992-2010 Cisco Systems, Inc. Privacy Statement and Trademarks Trademarks.. Close Window
Assessment System 1. Assessment Selection
2. Assessment Settings
3. Take Assessment
Take Assessment - DRSEnt Chapter 2 - CCNA Discovery: Introducing Routing and Switching in the Enterprise (Version 4.0)
Time Remaining:
16 What is the maximum recommended cable length for Fast Ethernet over UTP? 50 meters
75 meters 100 meters 150 meters
17 What two features are true of an IDF? (Choose two.) referred to as a wiring closet
located within the NOC contains access layer devices for user connectivity contains firewalls and content filtering devices alternately called an MDF 18 What device is responsible for moving packets to destination networks outside the local network? router
switch IPS device IDS device 19 A network administrator needs to configure Telnet access to a router. Which group of commands enable Tel access to the router? Router(config)# enable password class Router(config)# line con 0 Router(config-line)# login Router(config-line)# password cisco Router(config)# ip host 192.168.1.1 NewYork Router(config)# enable password cisco Router(config)# line aux 0 Router(config-line)# login Router(config-line)# password cisco Router(config)# enable password class Router(config)# line vty 0 4 Router(config-line)# password cisco Router(config-line)# login 20 What is the demarcation? physical point where the ISP responsibility ends and the customer responsibility begins
physical location where all server farm connections meet before being distributed into the Core point of entry for outside attacks and is often vulnerable point of entry for all Access Layer connections from the Distribution Layer devices 21 Which type of network map shows the location of hosts, network devices, and media? physical topology
logical topology control plane business continuity 22 Which two types of information should be included in a business continuity plan? (Choose two.)
maintenance time periods intrusion monitoring records offsite data storage procedures alternate IT processing locations problem resolution escalation steps 23 A Cisco router needs to be configured from a remote location by the use of out-of-band management. Whic method should be used? Use Telnet or SSH and connect to an IP address of a FastEthernet port.
Use HTTP to connect to an IP address on a FastEthernet port. Use dial up and a modem to connect to the auxiliary port. Use a terminal emulation program and connect to the console port. 24
In your opinion (this has no bearing on your grade), please indicate your interest in this course: 25
In your opinion (this has no bearing on your grade), please indicate how enthusiastic you are about the content of this course and the things you’re learning (or have learned): 26
In your opinion (this has no bearing on your grade), please rate your motivation to do well in this course:
Showing 2 of 2
Page:
2
Next>
Close Window All contents copyright 1992-2010 Cisco Systems, Inc. Privacy Statement and Trademarks Trademarks..
