[Back To Main Menu] Translate to Bahasa indonesia : OFF
00:59:51 1. Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.
2. Each queue in HTB has two rate limits, except: A. TIR
B. MIR C. CIR 3. Which configuration menu should you use to change router's Winbox default port? A. /system resource B. /ip firewall service-ports C. /ip firewall filter D. /ip service 4. Action=redirect can be used in NAT chain src-nat A. true B. false 5. What action should be used to inform source that packets reached destination, but was not accepted ? A. action=drop B. action=accept C. action=tarpit D. action=reject 6. Which type of encryption could be used to establish a connection with a simple passkey without using a 802.1X authentication server? A. WPA PSK/WPA2 PSK B. WPA EAP/WPA2 EAP 7. Webfig service can be disabled by disabling /ip service 'www' service on port 80:
8. From which of the following locations can you obtain Winbox?
A. Via the console cable B. Files menu in your router C. mikrotik.com D. Router's webpage 9. DHCP server is configured on a router’s ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:
A. 192.168.0.1-192.168.0.255 B. 192.169.0.1-192.169.0.254 C. 192.168.0.1-192.168.0.14 D. 192.168.0.1-192.168.0.99,192.168.0.101-192.168.0.254 10. It is possible to have PPTP Client and PPTP server on one MikroTik router at the same time.
11. What can be used as ’target-address’ in the simple queue? A. server’s address B. client’s MAC address C. address list name D. client’s address 12. PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE server.
13. MikroTik RouterBoard serial port can be used directly from RouterOS to control some external machine (without using IP firewall NAT port forwarding)?
A. It can be used to write to a display, i.e. to send commands but not to receive B. Yes, it can be used as an input/output port to control any serial controller 14. Which facility should be used, to ensure that clients with radio signal strength poorer than – 90 dBm can't connect to interface wlan1 on a MikroTik AP? Choose one answer A. /interface wireless set wlan1 basic-rates-a/g B. /interface wireless access-list C. /interface wireless registration-table remove numbers=-91 D. /interface wireless security-profiles add static-transmit-key 15. Which are necessary sections in /queue simple to set bandwidth limitation? A. target-address, dst-address B. target-address, dst-address, max-limit C. max-limit D. target-address, max-limit 16. When adding a static route, you must always ensure that you add both the gateway and the interface.
17. If 'check-gateway' option is enabled on one route it will affect all routes with the same gateway:
18. You want to transfer existing '/ip firewall filter' configuration from one router to a new system. Choose the best possible way to do: A. Export global configuration and remove everything apart from '/ip firewall filter' B. Create backup only of '/ip firewall filter' rules
C. Create backup, edit backup file and restore on target router D. Export only '/ip firewall filter' 19. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package: A. dhcp B. routing C. advanced-tools D. no extra package required 20. The 'connect-list' of wireless interfaces is used A. for configuring SSID on the interface B. for specifying APs not to connect to C. for specifying APs to connect to D. for preventing communications between the clients 21. Mark all the features that can be used for limiting client registrations to your access point: A. WDS B. access-list C. registration-table D. wpa 22. Which default route will be active? /ip route add disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1 add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2 A. Route via gateway 2.2.2.2 B. Route via gateway 1.1.1.1
23. Same IP address can be included in multiple address-lists, and these lists can be used separate from one another.
24. What is marked by connection-state=established matcher? A. Packet is related to, but not part of an existing connection B. Packet belongs to an existing connection,for example a reply packet or a packet which belongs to already replied connection C. Packet begins a new TCP connection D. Packet does not correspond to any known connection 25. PPP Secrets are used for A. PPPoE clients B. Router users C. L2TP clients D. PPtP clients E. PPP clients F. IPSec clients
