SLIP FORM WORK

SLIP FORM WORK  AR. SAURABH SAURABH YADA YADAV  V 

PROF. ARCHANA SINGH  RATHORE 

TO BE COVERED TODAY •

•

Introduction to formwork Types

•

Importance

•

Slip formwork

•

Horizontal construction

•

Vertical construction

•

Material use

•

Safety

FORM WORK •

Temporary boarding or sheeting erected to contain freshly placed and compacted concrete until it has gained sufficient strength to be selfsupporting.

IMPOTANCE OF FORMWORK •

Formwork system system is the key factor determining the success of a construction project in terms of 

•

SPEED

•

QUALITY

•

COST

•

SAFETY OF WORKS

Classification according to materials of construction •

•

WOOD most popular formwork material-low initial cost-high adaptability to complicated shape-labour intensive and environmental unfriendly

•

•

•

Steel-

•

•

•

•

hot-rolled or cold-formed sections-heavy weight-suitable for large-sized panels •

Aluminiumstiff and light weight-higher material and labour costexcellent excellent finish

WHAT IT IS? Slip forming, continuous poured, continuously formed, or slip form construction is a construction method in which concrete is poured into a continuously moving form.

AR. SAURABH YADAV

•

•

Method of vertically extruding a reinforced reinforced concrete section and is suitable for construction of core wallsi n high-rise structures – lift shafts, stair shafts,towers. shafts,towers. The formwork rises continuously, at a rate of  about300 mm per p er hour, hour, supporting itself on the core and not relying on support or access from other parts of the building or permanent works

In vertical slip forming the concrete form may be surrounded by a platform on which workers stand, placing steel reinforcing rods into the concrete and ensuring a smooth pour

AR. SAURABH YADAV

In horizontal slip forming for pavement and traffic separation walls concrete is laid down, vibrated, worked, and settled in place while the form itself slowly moves ahead

AR. SAURABH YADAV

Placing Concrete Underwater Underwater 



Advantages: Can be used to funnel concrete down through the water into the structure. Watch for: Discharge end always has to be buried in fresh concrete to ensure seal between water and concrete mass.

AR. SAURABH YADAV

ONCE UPON A TIME…… •

•

•

The slip forming technique was in use by the early 20th century for building silos and grain elevators. In the 1947-1950 period, AT&T Long Lines built 49 concrete towers up to 191 ft tall for microwave relay stations; most using the slip-form method.

The technique was introduced to residential and commercial buildings in the late 1960s.

AR. SAURABH YADAV

The first notable use of the method in a residential/retail business was the Skylon Tower in Tower  in Niagara Falls, Ontario, which was completed in 1965

AR. SAURABH YADAV

Components of vertical slip form:

AR. SAURABH YADAV

HOW DO WE DO IT ?

AR. SAURABH SAURAB H YADA

Slip form structural detail

HOW DO WE DO IT ?

AR. SAURABH YADAV

ADVANTAGES The main advantages can be listed as: (i) quicker construction; (ii) less formwork; (iii) less scaffolding; scaffolding; (iv) easier working conditions; (v) greater salvage; (vi) better concrete; (vii) a joint less, watertight watertight structure.

Cost-effective Walls Walls Slip form wall made of 1:12 cement and quarry-dust/ sand mix with 2% of coir fibers. The steel shutter is used For slip form wall construction. Some types of soil can also be used instead of  quarry dust.

Slip form wall construction

AR. SAURABH YADAV

AR. SAURABH YADAV

AR. SAURABH YADAV

BASIC SEQUENCE •

•

•

•

•

The formwork and the access platform are assembled on the ground. The assembly is raised using hydraulic jacks. As the formwork rises continuously, continuously, continuous concrete and rebar supply are needed until the operation is finished. At the end of the operation the formwork is removed using a crane. The entire process is thoroughly inspected and highly controlled

BENEFITS •

•

•

•

Careful planning of construction process can achieve high production rates Slip form does not require the crane to move upwards, upwards , minimising crane use. Since the formwork operates independently, formation of  the core in advance of the rest of the structure takes takes it off  the critical path – enhancing main structure stability. Availability Availability of the different working platforms in the formwork system allows the exposed concrete at the bottom of the rising formwork to be finished, making it an integral part of the construction process.

AR. SAURABH YADAV

BENEFITS •

•

Certain formwork systems permit construction of  tapered cores and towers. Slip form systems require a small but highly skilled workforce workforce on site

AR. SAURABH YADAV

• •

•

•

•

•

Other considerations This formwork is more economical for buildings more than seven storey high. Little flexibility for change once continuous concreting has begun therefore extensive planning and special detailing are needed. Setting rate of the concrete had to be constantly monitored to ensure that it is matched with the speed at which the forms are raised.

The structure being slipformed should have significant dimensions in both major axes to ensure stability of the system. Standby plant and equipment should be available though cold jointing may occasionally be necessary

AR. SAURABH YADAV

THANKS!!!