Side Channel pumps Self-priming, segmental type with very low NPSH
CEH 1201 ... 6 1 0 8 CEH 1202/5 ... 61 6108 08//5 CEH 1202/7 ... 6107 6107//7 Technical data Capacity:
from 0,4 up to 35 m³/h
Delivery head:
from 10 up to 354 m
Speed:
1450 rpm (max. 1800 rpm)
Temperature :
max. 120 °C max. 180 °C for high temperature design (higher temperatures upon request)
Ca s i n g p r e s s u r e :
PN 40
Shaft sealing:
stuffing box or mechanical seal
Flange connections:
DIN 2501 / PN 40
Dir irec ecti tion on of ro rota tati tion on::
antian ti-cl clock ockwi wise se,, (when seen from the drive end)
Application
Construction
The Sterling SIHI CEH pump is a self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level. The CEH pumps are used for problem-free pumping of clean liquids at unfavourable suction side conditions. They are also very suitable for positive suction heads below 0.5m
Casing pressure
The different material possibilities with uniform dimensions and performance characteristics as well as the standard exchangeable components, make the CEH particularly recommendable for applications in the pharmaceutical, chemical or petrochemical market as well as in the plastic or oil industry. Because of its low NPSH and positive suction head the CEH is very suitable for the pumping of liquefied gasses and liquids under vapour pressure like condensate, refrigerant, boiler feed water or LPG. The pumps of the CEH /7 series have a retaining stage to avoid the dry running by controlling the liquid level in the pump. This design is especially developed for the handling of liquids under vapour pressure or when pumping from underground tanks. The series CEH /5 are used for bottom off-loading of liquids under vapour pressure.
Design Pumps of the series CEH have a segmental type construction with open vane wheel impellers. The construction of the CEH pump is a so-called centrifugal combined system. This combination combination pump is suited with a centrifugal stage in serial connection before the side channel stages to obtain a more favourable NPSH. The program comprises 6 sizes each with 1-8 stages. The existing material design allows an optimum rating for the respectively desired performance range and the pumping medium. Pumps of the series CEH /7 are equal to the CEH series but equipped with a retaining stage. This program comprises 6 sizes with 2-7 stages. The series CEH /5 have also 6 sizes but with 2-8 stages. The applied hydraulic components are from our Modular Side Channel system (interchangeability of parts).
Maximum 40 bar from -40 °C up to +120 °C. Maximum 32 bar from +120 °C up to +180 °C. Pressure stages for temperature as per DIN EN 1333. Please observe Technical rules and safety regulations: Casing pressure = inlet pressure + delivery head at minimum pump capacity.
Position of branches Axial suction branch, discharge branch points radially upwards
Flanges The flanges correspond to DIN EN 1092-2 / PN 40. Flange design as per DIN 2512 with groove or drilled according to ANSI 150 or 300 lbs is basically possible.
Bearing One grease lubricated ball bearing according to DIN 625 and one liquid surrounded sleeve bearing (design A). The ball bearing is greased for life.
Direction of rotation Anti-clockwise, when looking from the drive end.
Shaft sealing The shaft can be sealed by a stuffing box or a mechanical seal conform DIN EN 12756. The shaft sealing is also available in a design suitable for heating or cooling of the stuffing box or the mechanical seal. Double mechanical seal (back-to-back as well as tandem) or a quench design with throttle bush are available upon request. The CEH can also be supplied with a magnetic coupling (for information see the separate catalogue).
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Material design CEH Cast iron and Ductile iron P os
Co m p o n e n t s 0A
1060
Suction casing
1070
Discharge casing
1080 1090 1140 1141
Intermediate piece
Material design 0F 1A
0B
EN EN-GJL-250
1B
1F
EN-GJS-400-18-LT
2 10 0
Shaft
X 20 Cr 13
2 31 0
Impeller
EN-GJL-250
2350
Vane whe wheel el imp impell eller er
3500
Bear Be arin ing g ho hous usin ing g
4410
Mechanical seal casing
4510
Stuffing box casing
0 24 1
Bearing bush
CuZn40Al2 G-X 3 CrNiMoCuN 26 6 3 3
PAEK
CuZn40Al2 G-X 3 CrNiMoCuN 26 6 3 3
PAEK
EN-GJL-250 EN-GJL-250
EN-GJS-400-18-LT CY 10 C / Carbon Antimony *
* Bearing bush in Carbon Antimony is used only in the high temperature design. This high temperature design is also provided with cup springs and a cooled stuffing box or cooled mechanical seal.
Stainless steel P os
Com po nen ts
Material design 4B
4F
1060
Suction casing
1070
Discharge casing
1080 1090 1140 1141
Intermediate piece
2 10 0
Shaft
2 31 0
Impeller Im
2 35 0
Vane wheel impeller
3 50 0
Bearing housing
EN-GJL-250 coated
4 41 0
Mechanical seal casing
G-X 6 CrNiMo 18 10
0241
Bear Be arin ing g bu bush sh
G-X 6 CrNiMo 18 10
X 5 CrNiMo 17 12 2 G-X5 CrNiMoNb 18 10 G-X 3 CrNiMoCuN 26 6 3 3
PAEK
CY 10 C / Carbon Antimony *
* Bearing bush in Carbon Antimony is used only in the high temperature design. This high temperature design is also provided with cup springs and a cooled stuffing box or cooled mechanical seal.
Casing seal
General comments
The casing can be sealed with a liquid sealing compound or soft Teflon.
Side Channel pumps with the same hydraulic construction are manufactured in series as:
Drive
CEH CEB
By electric motor, type of construction IM B3. For LPG, EExe or Eex d(e) motors are available.
With magnetic coupling Vertical tank mounted pump, PN 25 with magnetic coupling CEV Vertical tank mounted pump, PN 25 with mechanical seal (replacement of CVGP) AEH High duty pump, PN 40 Also available with magnetic coupling AKH Medium duty pump, PN 16 AOH Low duty pump with oval flanges, PN 10 Technical documents about these pump series will be readily supplied on request.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 2 / 20
Sectional drawing and parts list CEH (typical) CEHA with stuffing box 1060
1090 2310 1140
1080 0241
1070 4610
2350
4510 1141
2100 3500
Pos.
Components
0241 1 06 0 1 07 0 1080 1 08 1 1090 1140 1141 2100 2310 2350 3 50 0 4 33 0 4410 4 42 0 4510 4 61 0
Bearing bush Suction casing Di sch arge cas ing Intermediate piece Retaining stage Suction intermediate piece Discharge intermediate piece Discharge intermediate piece Shaft Impeller Vane wheel impeller Bearing housing Mechanical seal Mechanical seal casing Cooling insert Stuffing box casing Stuffing box
CEH with mechanical seal Unbalanced as well as balanced mechanical seals are available. 4410
4420
Cooled stuffing box
4410
4330
CEH /7 with retaining stage
Cooled mechnical seal
1081 All possible design combinations can be found in the delivery program Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 3 / 20
Operating principle CEH The CEH pump or so-called centrifugal combined system (combination pump) is suited with a low NPSH centrifugal impeller before the side channel stages (series connection). This NPSH inducer stage creates enough pressure to overcome the entrance pressure loss of the first side channel stage or NPSH required. A side channel stage consist of: • a suction intermediate piece with the suction port, • a discharge intermediate piece with the side channel, the air displacement channel at the end of the side channel, the discharge port and the gas slot, • a vane wheel impeller enclosed by the two intermediate pieces.
Vane wheel impeller
Discharge intermediate piece Suction intermediate piece Impeller The turning of the vane wheel impeller creates an under pressure at the beginning of the side channel (centrifugal effect) and the gas or liquid with gas is drawn in. The air displacement channel provokes a positive displacement effect so the gas remaining at the root of the vane wheel impeller is forced out through the gas slot. The pressure generating is obtained by the repetitive re-entering of the liquid in the side channel (corkscrew movement). Corck screw movement of liquid
Side Channel Gas
Discharge intermediate piece Suction intermediate piece Gas slot
Air displacement channel Positive displacement effect
A side channel pump can de-aerate and degas the suction line by itself and is thus very suitable for suction lift operation. A side channel pump can handle large quantities of (entrained) gas. Mixtures up to a gas share of 50% are possible. The ability for selfpriming and the handling of large amounts of (entrained) gas, will guarantee continuous operation even in case of evaporation and therefore contribute to a higher level of safety in industrial processes. To avoid cavitation the distance between the liquid level and the entrance at the suction side of the pump is restricted. This distance is related to the NPSH or Net Positive Suction Head. The NPSH for CEH pumps is very low due to it special construction. The axial entrance and its larger diameter results in a less disturbed flow and lower friction losses. Together with the low NPSH of the centrifugal impeller the CEH can handle a positive suction head of less than 0.5 m. This makes the CEH very suitable for pumping liquids near their boiling point at reasonable economic expenses and the low NPSH guarantees also full output capacity because of operation without cavitation. Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 4 / 20
Performance range CEH General conditions Liquid: Density: Viscosity: Temperature: Atmospheric pressure:
Water 1 kg/dm3 1 cSt 20 °C 1013 mbar
Characteristic tolerances Capacity ± 5% - Delivery head ± 5% - Power + 10% For designs with a mechanical seal or a casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Measuring standard According to ISO 5198 - - - - = maximum for CEH /7 (with retaining stage) -..-..-.. = minimum for CEH /5 (e.g. LPG handling) , CEH /7 H (m)
n = 1450 rpm
300
200
1200
3100
3600
4100
5100
6100
100
0
0,4
1
2
4
6
8
10
20
Q (m3 /h)
40
NPSH (m) 6100
0,8 0,6
5100
0,4 1200
0,2 0
0,4
1
4100
3600
3100
2
4
6
8
10
20
Q (m 3 /h)
40
The NPSH curve is suitable for liquids without gas. When using a liquid containing gas (e.g. water 20 °C) a safety margin of 1 m has to be added.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 5 / 20
Dimension chart, Pump set drawing and Performance curves CEH 1200 and CEHA 1200/5 w
1 2 0 8
200
1450 rpm
a
1 2 0 7 1 2 0 6 1 2 0 5 1 2 0 4
H (m) 100
171 25 4
1 2 0 3 12 0 2
G¼
12 01 1)
0 3
2
m2 m1
113 e1 w1
∅14x4 ∅105
12 0 4 12 0 3 12 0 2
1
41
v f1
1 2 0 8 1 2 0 7 1 2 0 6 1 2 0 5
P (kW)
44
DN20
∅75 ∅14j5
100
12 01 1)
5
∅150 ∅110
0
DN40
NPSH3) (m) 0,6 0,4 0,2 0 0
h3
∅18x4
176 10
100
16,1
d 35 13
1
2
Q (m3 /h)
105 140 e2 b2
3
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
* Dimensions depend upon the motor brand. 1)
Pump size
1201 1202
1203
1204
1205
1206
1207 1208
kW 0.37 0.55 0.55 0.75 1.1 0.75 1.1 1.5 1.1 1.5 2.2 1.1 1.5 2.2 1.5 2.2 3 1.5 2.2 3 2.2 3
Motor Base kW 2) size plate 71 P007 1) 80 P008 0.55 80 P008 0.75 80 1 90S P241 0.75 80 P210 1 90S P241 1.35 90L 1 90S P241 1.35 90L 2 100L P272 1 90S 1.35 90L P272 2 100L 1.35 90L P272 2 100L P015 2.5 100L 1.35 90L 2 100L P015 2.5 100L 2 100L P015 2.5 100L
Coupling Weight 2) pump set B BDS 39 1) 68 18 45 47 68 76 20 44 56 52 68 76 22 58 62 60 68 76 24 64 80 88 75 66 68 76 26 70 80 88 77 68 76 72 28 84 80 88 85 68 76 74 30 86 80 88 87 88 80 88 32 89
a
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas. 2)
b2 c d 317 195 20 15 297
e1 350 400
e2 v f1 285 110 -9 265 120
h3 135 140
297 20 15
400
265 120
140
330 25 19 300 263 25 19 330
480 420
290 125 260 115
480
290 125
480
290 125
540
320 140
540
320 140
229
297
330
25 19
360 331 360 25 19
-9
m1
m2
238
204
272
238
165 -9
165
306
272
-9
165
340
306
-9
360 19 365 361 25 15
540
320 140
600
325 160 -9
399 361 25 15 433 361 25 15
165
374
340
165
w* 609 643
w1 570 640
677
640
735 711
730 650
769
730
803
730
844
820
837 878 871 912 912 905
820 820
150
408
374
600 325 160 - 9
150
442
408 946
920
600
150 476
442 980
920
325 160
-9
920
The weight of the pump will be approximately 6% higher when using Stainless steel.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 6 / 20
Dimension chart, Pump set drawing and Performance curves CEH 3100 and CEHA 3100/5
300 H (m) 200
w
1450 rpm
3 1 0 8 3 1 0 7 3 1 0 6 3 1 0 5
a
201 40 4
3 1 0 4 3 10 3
100
G¼ 50
3 10 2
3 10 1 1)
42
m2 m1
0 P (kW) 7
5
3 1 0 8 3 1 0 7 3 1 0 6 3 1 0 5
4
3 10 4
6
134
v f1
e1 w1
∅18x4
∅140 ∅100
DN32
3 10 3
3 2
∅145
DN65
0
214 12
h3
NPSH3) (m)
d
∅18x8
112
21,5
35 13
0,2 0
6
∅185
31011)
1
∅19j5
132
3 10 2
1
2
3
4
Q (m3 /h)
135 170 e2 b2
5
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
* Dimensions depend upon the motor brand. 1)
Pump size
3101 3102 3103 3104
3105
3106
3107
3108
Motor 2) kW kW 0.75 1) 1.1 1.1 1 1.5 1.35 2.2 2 2.2 2 3 2.5 2.2 2 3 2.5 4 3.6 3 2.5 4 3.6 5.5 5 4 3.6 5.5 5 7.5 6.8 4 3.6 5.5 5 7.5 6.8 4 3.6 7.5 6.8 11 10
Base size plate 80 P008 90S P241 90S P241 90L 100L P272 100L P272 100L 100L P272 100L 112M P015 100L P015 112M 132S P017 112M P015 132S P017 132M 112M 132S P017 132M 112M P017 132M 160M P436
Coupling 2) Weight pump set B BDS 60 1) 68 31 67 72 68 76 34 74 80 88 81 89 80 88 38 90 93 80 88 42 94 117 102 80 88 42 120 95 103 158 80 88 123 45 161 95 103 171 80 88 143 52 165 95 103 205 198 95 103 55 208 208
a
b2 c d 297 20 15 213 330 25 19
253
330
25 19
360 293 360 25 19 333
360 361
25
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas. 2)
e1 400 480
e2 v f1 h3 265 120 152 -13 177 290 125
480
290 125
540
320 140
540 320 140 -13 177
19
540 320 140
15
600 325 160
373 361 25 15
-13 177
600 700 600
325
160
-13
177
m1
m2
w* 691 749
w1 640 730
261
227
301
267
789
730
830
820
341
307 870
820
381
347
910
820
931 950 971 1047 1011 1087 1113 1051 1127 1153 1167 1193 1285
920
162 -13
200 160
162
421
387
192 162
413 361 25 15 700
325 200 -13 192
461
427
453 361 25 15
700
172 325 200 -13 192
501
467
361 25 15
700
325 200
541
507
540 30 24
840
490 215
493
-13
192 240
920 1100 920 1100 1100 1100 1270
The weight of the pump will be approximately 6% higher when using Stainless steel.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 7 / 20
Dimension chart, Pump set drawing and Performance curves CEH 3600 and CEHA 3600/5 H (m)
w
3 6 0 8
200
1450 rpm
a
3 6 0 7 3 6 0 6 3 6 0 5
201 40 4
3 6 0 4
100
3 60 3
3 60 2
G¼
360 11)
0 P (kW)
6
3 6 0 8 3 6 0 7 3 6 0 6
5
3 6 0 5
4
3 60 4
7
42
m2 m1
134 e1
v f1
w1 ∅18x4 ∅100
6
∅185 ∅145
DN65
360 11)
1
∅19j5
132
3 6 0 2
2
∅140
DN32
3 60 3
3
50
214 12
h3 3)
NPSH (m) 0,5
d
∅18x8
112
21,5
35 13 135 170 e2 b2
0,2 3
4
5
6
7
Q (m3 /h)
8
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
* Dimensions depend upon the motor brand. 1)
Pump size
3601 3602 3603
3604
3605
3606 3607 3608
kW 0.75 1.1 1.5 1.5 2.2 2.2 3 4 3 4 5.5 3 4 5.5 4 5.5 7.5 5.5 7.5 5.5 7.5 11
Motor Base 2) kW size plate 80 P008 90S 1) P241 90L 1.35 90L P241 2 100L P272 2 100L 2.5 100L P272 3.6 112M 2.5 100L P272 3.6 112M P015 5 132S 2.5 100L 3.6 112M P015 5 132S P017 3.6 112M P015 5 132S P017 6.8 132M 5 132S P017 6.8 132M 5 132S P017 6.8 132M 10 160M P436
Coupling Weight 2) pump set B BDS 55 31 1) 68 67 74 68 76 74 34 80 88 89 89 80 88 38 101 119 105 80 88 42 117 95 103 152 102 80 88 45 120 95 103 171 80 88 123 48 161 95 103 171 165 95 103 52 168 161 95 103 55 171 254
a
e1 400
e2 v 265 120
330 25 19 480
290 125
330 25 19 360
480 540
290 125 -13 177 320 140
293 360 25 19
540
213 253
b2 c d 297 20 15
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas. 2)
360 333
361
19 25
540
15
600
373 361 25 15
600
f1
m1
m2
261
227
301
267
320 140 -13 177 341
307
-13
h3 152
177
320 140
177 -13 162 325 160 182
700
325 160 -13 200 160 325 -13 200
453 361 25 15
700
325 200 -13 192
361 25 15
700
325 200
540 30 24
840
490 215
700 600 413 361 25 15
493
-13
162
381
347
421
387
192 162 192
192 240
461
427
501
467
541
507
w* 691
w1 640
749
730
789 830
730 820
870 891 910 931 1007 950 971 1047 1011 1087 1113 1127 1153 1167 1193 1285
820 820 920 920 1100 920 1100 1100 1100 1270
The weight of the pump will be approximately 6% higher when using Stainless steel. Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 8 / 20
Dimension chart, Pump set drawing and Performance curves CEH 4100 and CEHA 4100/5 H (m)
w
4 1 0 8 4 1 0 7 4 1 0 6
200
1450 rpm a
195 45 4
4 1 0 5 4 1 0 4 4 10 3
100
4 10 2
G¼
410 11)
0 P (kW) 12
m2 m1
140 e1 w1
∅18x4
4 1 0 5
8
43
v f1
4 1 0 8 4 1 0 7 4 1 0 6
10
52
∅110
4 1 0 4
6
DN40
4 10 3
410 1
2
8
∅200 ∅160
DN80
1)
238 15
h3
NPSH3) (m) 0,5
0
∅24j5
140
4 10 2
4
∅150
d
∅18x8
132
26,9
40 13
6
7
8
9
10
11
155 195 e2 b2
12
13 Q 3 (m /h)
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
* Dimensions depend upon the motor brand. 1)
Pump size
4101 4102 4103 4104 4105 4106 4107 4108
kW 1.5 2.2 2.2 3 4 4 5.5 5.5 7.5 5.5 7.5 11 7.5 11 7.5 11 15 11 15
Motor Base 2) kW size plate 90L P241 1) 100L P272 100L 2 2.5 100L P272 3.6 112M 3.6 112M P015 5 132S P017 5 132S P017 6.8 132M 5 132S P017 6.8 132M 10 160M P385 6.8 132M P385 10 160M P436 6.8 132M P436 10 160M 13.5 160L P487 10 160M P487 13.5 160L
Coupling Weight 2) pump set B BDS
68 80
1)
41
80
88
47
80 95
88 103
53
95
103
59
95
103
65
95
103
70
95
103
76
95
103
82
81 95 98 110 128 128 179 172 182 178 181 264 196 269 202 275 349 281 355
a
e1
e2
h3
m1
m2
w*
w1
330 25 19 360
480 540
290 125 -23 197 320 140
294
260
798 839
730 820
323 360 25 19
540
320 140 -23 197
349
315
268
b2
c
d
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas. 2)
v
f1
378 361 25 15
600 700
325
160 182 -23 200 192
404
370
433 361 25 15
700
325 200 -23 192
459
425
361 25 15
700
325
514
480
490 30 24 490 543 30 24 540
740 740 840
540 30 24
840
610 35 28
940
440 240 440 200 212 -23 490 215 240 212 490 215 -23 240 550 240 260
653 610 35 28
940
550 240 -23 260
488
598
200 -23
192
569
535
624
590
679
645
894 915 970 1046 1101 1127 1156 1182 1274 1237 1329 1292 1384 1446 1439 1501
820 920 1100 1100 1100 1140 1140 1270 1270 1420 1420
The weight of the pump will be approximately 6% higher when using Stainless steel.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 9 / 20
Dimension chart, Pump set drawing and Performance curves CEH 5100 and CEHA 5100/5 300 H (m) 200
5 1 0 8 5 1 0 7
w
1450 rpm a
237 50
5 1 0 6
4
5 1 0 5
5 10 4 5 10 3
100
G¼
5 10 2
60
66
m2 m1
159
510 1 1)
0 30 P (kW) 20
e1
v f1
5 1 0 8 5 1 0 7
w1
5 1 0 6
∅18x4
5 10 5
∅125
5 10 4
DN50
5 10 3
10
∅24j5
165
8
∅235
5102
∅190
51011)
DN100 276 18
h3
NPSH3) (m)
d
∅22x8
160
30,9
45 15
0,5 0 10
∅165
12
14
16
18
170 215 e2 b2
Q 20 (m3 /h)
c
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
General:
* Dimensions depend upon the motor brand. 1)
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas.
Design tolerances : Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each. Pump size
5101
5102
5103 5104 5105
5106
5107 5108
Motor 2) kW kW 3 1) 4 5.5 5.5 6.8 7.5 6.8 11 10 7.5 6.8 11 10 15 13.5 11 10 15 13.5 15 13.5 18.5 15 22 17.5 15 13.5 18.5 15 22 17.5 30 24 18.5 15 22 17.5 30 24 22 17.5 30 24
Base size plate 100L P272 112M P015 132S 132S P017 132M 160M P385 132M P017 160M P385 160L P436 160M P436 160L 160L 180M P487 180L 160L P487 180M 180L P538 200L 180M 180L P538 200L 180L P538 200L S389
Coupling Weight 2) pump set B BDS 123 80 1) 60 162 95 170 183 95 103 70 193 269 196 95 103 80 279 110 118 353 95 103 289 90 110 118 363 374 110 118 101 395 125 135 415 384 110 118 423 111 425 125 135 506 110 118 415 121 435 125 135 516 446 125 135 132 527
a
2)
b2 c d 19 360 305 361 25 15
e1 540
e2 v 320 140
h3 225
m1
m2
600
325 160 -28 210
353
315
361 25 15
700
325
428
390
380
f1
200 -28
220
w* 918 939 1015 1090 1116 1208 1191 1283 1345 1358 1420 1495
w1 820
920 1100
490 30 24 361 25 15 455 490 30 24 540
740 440 240 700 325 220 200 740 440 -28 240 840 490 215
530 540 30 24
840
490 215 -28 240
578
540
605 610 35 28
940
260 550 240 -28 280
653
615 1557 1420
940
550 240
610 680
660
35 28
1060 600 280
503 465
260 -28 280
280
300 660 35 1060 600 280 280 830 28 -28 540 40 1200 490 300 300
1270
1570 1420 728
690 1632
300 755 660 35 28 1060 600 280 -28
1140 1100 1140 1270
1620
1690 803 878
765
1707
1620 1765 1782 1620 840 1840 1800
The weight of the pump will be approximately 6% higher when using Stainless steel. Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 10 / 20
Dimension chart, Pump set drawing and Performance curves CEH 6100 and CEHA 6100/5 H (m) 300
w
6 1 0 8 6 1 0 7
1450 rpm
a
262 65
6 1 0 6
200
4
6 1 0 5 6 1 0 4 6 10 3
100
G3/8 64
6 10 2
6 10 1 1)
m2 m1
0 P (kW) 50 40 30 20 10
172 e1
v f1
6 1 0 8 6 1 0 7 6 10 6
w1
6 10 5 6 10 4
∅18x4 ∅145
∅185
DN65
6 10 3
180
6 10 2 61011)
∅32j5
10
∅235 ∅190
DN100
0 NPSH3) (m)
d
180
300 20
h3
∅22x8
35,3
50 15
0,5 0 15
63
20
25
30
Q (m3 /h)
195 245 e2 b2
35
c
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
General:
* Dimensions depend upon the motor brand. 1)
Not for design CEH /5. For EExe II T3 motors. 3) A safety margin of 1 m has to be added when using a liquid containing gas.
Design tolerances : Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each. Pump size
6101 6102 6103 6104 6105 6106
6107
6108
Motor 2) kW kW 5.5 1) 7.5 11 10 15 13.5 18.5 15 22 17.5 22 17.5 30 24 30 24 37 30 30 24 37 30 45 36 30 24 37 30 45 36 37 30 45 36 55 44
Base size plate 132S P017 132M 160M P385 160L P436 180M P487 180L 180L P487 200L P538 200L P538 225S 200L P538 225S S609 225M 200L S389 225S S609 225M 225S 14211 225M 250M 14212
Coupling Weight 2) pump set B BDS 206 95 80 1) 216 95 103 291 92 110 118 365 110 118 404 105 125 135 419 431 125 135 117 512 125 135 525 130 140 152 594 125 135 537 142 606 140 152 670 125 135 550 155 619 140 152 683 532 140 152 167 630 160 701
a
d
e1
e2
338 361 25 15
700
325 200 -35 240
490 30 24 540
740 840
440 200 -35 260 490 215
w* w1 1073 391 353 1100 1099 1281 1140 481 443 1343 1270
940 5 50 240 -35 280
571 533 1495 1420
428
b2
2)
c
518 610 35 28
v
f1
h3
610 940 550 240 280 35 28 -35 660 1060 600 280 300 300 698 660 35 28 1060 600 280 -35 325 660 35 1060 600 280 300 788 730 40 28 1200 670 310 -35 325 608
540 878
730
490 300 40 28 1200
670 310
968 740 40 28 1300 690
350 400
m1
m2
1585 1643 1733 751 713 1798 1823 841 803 1888 661 623
300 -35
-35
325
1420 1620 1620 1620 1820
1913 1800 931
893
1978 1820
2003 2000 1021 983 2080 370 2125 2100 345
The weight of the pump will be approximately 6% higher when using Stainless steel.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 11 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 1200/7 (with retaining stage) w 200 H (m) 100
1450 rpm
a
1 2 0 7 1 2 0 6 1 2 0 5 1 2 0 4 1 2 0 3
171 25
G½
4
12 02
G¼ 0
2
41
m2 m1
113 e1
v
3 P (kW)
44
f1
1 2 0 7 1 2 0 6 1 2 0 5
w1 ∅14x4
1 2 0 4
∅105 ∅75
12 03
1
DN20
12 0 2
∅14j5
100
5
∅150 ∅110
DN40
0 h3
NPSH1) (m) 0,4 0,2 0 0
∅18x4
176 10
100
16,1
d 35 13
1
2
Q (m3 /h)
105 140 e2 b2
3
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
Base Coupling plate
Motor kW size 0.55 80 1202/7 0.75 80 0.75 80 1203/7 90S 1.1 90S 1.1 1204/7 90L 1.5 90L 1.5 1205/7 100L 2 90L 1.5 1206/7 100L 2 90L 1207/7 1.5 100L 2
P210
BDS76
P241
BDS76
P272
BDS76
P272 P015
BDS76 BDS88 BDS76 BDS88 BDS76 BDS88
P015 P015
Weight pump set 52 22 53 54 24 64 70 26 71 73 28 84 69 30 86 71 32 91
a
b2
d
e1
e2
f1
h3
m1
m2
w*
w1
263 300 25 19
420
260 115
-9
165
306
272
709
650
297 330 25 19
480
290 125
-9
165
340
306
743 796
730
331 360 25 19
540
320 140
-9
165
374
340
830
820
360 19 25 361 15
540 600
320 140 325 160
-9
165 150
408
374
820 920
399 361 25 15 600
325 160
-9 150 442
408
433 361 25 15
325 160
-9
442
864 922 898 956 932 990
365
c
600
v
150 476
920 920
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 12 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 3100/7 (with retaining stage) w 1450 rpm
3 1 0 7 3 1 0 6
300 H (m)
a
201 40
G½
4
3 1 0 5 3 1 0 4
200
3 10 3 3 10 2
100
G¼ 0 P (kW)
5
3 1 0 5
4
3 1 0 4
42
m2 m1
134
v f1
3 1 0 7 3 1 0 6
6
50
e1 w1
∅18x4 ∅100
3 10 3
3
DN32
3 10 2
2
∅19j5
132
6
∅185
1
∅145
DN65
0 h3 d
1)
NPSH (m)
∅18x8
214
12
112
21,5
35 13
0,2 0
∅140
1
2
3
4
135 170 e2 b2
5 Q 3 (m /h)
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
3102/7 3103/7 3104/7 3105/7 3106/7 3107/7
Motor kW size 1.5 90L 100L 2 100L 2 2.5 100L 2.5 100L 3.6 112M 2.5 100L 3.6 112M 3.6 112M 132S 5 3.6 112M 132S 5
Base Coupling Weight pump set plate BDS76 87 P272 38 BDS88 100 104 P272 BDS88 42 106 101 P015 BDS88 45 107 107 P015 BDS88 48 110 BDS88 117 P017 52 BDS103 151 BDS88 120 P017 55 BDS103 154
a
b2
c
d
e1
e2
293 360 25 19
540
333 360 25 19
v
f1
h3
m1
m2
320 140 - 13 177
341
307
540
320 140 -13 177
381
347
373 361 2 5 15
600
325 160 -13 1 62 421
413 361 25 15
600
325 160 -13 162 461
453 361 25 15
700
325 200 -13
493 361 25 15
700
172 192 172 325 200 - 13 192
501 541
w* 822 880
w1
920
820
960 966 1000 427 1006 1046 467 1142 1086 507 1182 387
820
920 920 1100 1100
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 13 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 3600/7 (with retaining stage) H (m)
w 1450 rpm a
3 6 0 7 3 6 0 6 3 6 0 5 3 6 0 4
200
100
201 40
G½
4
3 60 3
3 6 02
G¼
0 P (kW) 7
5
3 6 0 5
4
3 6 0 4
3
3 6 0 3
m2 m1
134 e1 w1
∅18x4 ∅100
∅140
DN32
3 6 02
2
42
v f1
3 6 0 7 3 6 0 6
6
50
∅19j5
132
∅185
6
∅145
1
DN65
1)
NPSH (m) 0,5
h3
∅18x8
214
12
112
21,5
d 35 13
0
3
4
5
6
7
Q (m3 /h)
135 170 e2 b2
8
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
3602/7 3603/7 3604/7 3605/7 3606/7 3607/7
Motor kW size 1.5 90L 100L 2 100L 2 2.5 100L 2.5 100L 3.6 112M 2.5 100L 3.6 112M 3.6 112M 132S 5 3.6 112M 132S 5
Base Coupling Weight pump set plate BDS76 87 P272 38 BDS88 100 104 P272 BDS88 42 106 101 P015 BDS88 45 107 107 P015 BDS88 48 110 BDS88 117 P017 52 BDS103 151 BDS88 120 P017 55 BDS103 154
a
b2
c
d
e1
e2
293 360 25 19
540
333 360 25 19
v
f1
h3
m1
m2
320 140 - 13 177
341
307
540
320 140 -13 177
381
347
373 361 25 15
600
325 160 -13 162 421
413 361 25 15
600
325 160 -13 162 461
453 361 25 15
700
325 200 -13
493 361 25 15
700
172 192 172 325 200 - 13 192
501 541
w* 822 880
w1
920
820
960 966 1000 427 1006 1046 467 1142 1086 507 1182 387
820
920 920 1100 1100
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 14 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 4100/7 (with retaining stage) H (m)
w
1450 rpm 4 1 0 7
200
195
a
4 1 0 6 4 1 0 5
45
G½
4
4 1 0 4 4 10 3
100
4 10 2
G¼
0 P 12 (kW) 10
43
m2 m1
140 e1
v 4 1 0 7
f1 w1
4 1 0 6 4 1 0 5
8
52
∅18x4
4 1 0 4
6
4 10 3
4
4 10 2
∅110
DN40
∅150
∅24j5
140
8
∅200 ∅160
2
DN80
NPSH1) (m) 0,5
h3 d
∅18x8
238
15
132
26,9
40 13 0
6
7
8
9
10
11
155 195 e2 b2
12 Q 13 (m3 /h)
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
4102/7 4103/7 4104/7 4105/7 4106/7 4107/7
Motor kW size 2.5 100L 3.6 112M 3.6 112M 132S 5 3.6 112M 132S 5 132S 5 6.8 132M 6.8 132M 10 160M 6.8 132M 10 160M
Base Coupling plate
P015
BDS88
P015 P017
BDS88 BDS103 BDS88 BDS103
P017 P385
BDS103
P436
BDS103
P436 P487
BDS103
Weight pump set 112 53 115 121 59 158 130 65 164 172 70 232 248 76 278 254 82 296
a
b2
c
d
e1
378 361 25 15
600
433 361 25 15
600 700
488 361 25 15 700 543 490 30 24
740
598 540 30 24 8 40 653 540 30 24 610 35 28
840 940
e2
v
f1
h3
m1
m2
w* 959 325 160 -23 182 404 370 965 1020 160 182 325 -23 459 425 200 192 1116 1075 325 200 -23 192 514 480 1171 1226 440 200 -23 212 569 535 1237 212 1292 490 215 -23 624 590 1379 240 490 215 -23 212 679 645 1347 550 240 260 1434
w1
920 920 1100 1100 1140 1270 1270 1420
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 15 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 5100/7 (with retaining stage) w
300
5 1 0 7
H (m)
5 1 0 6
1450 rpm a
50
G½
5 1 0 5
200
237 4
5 10 4 5 10 3 5 10 2
100
G¼ 60
66
m2 m1
159
0 30
e1
v f1
5 1 0 7
P (kW)
5 1 0 6
20
w1
5 10 5 ∅18x4
5 10 4
∅165 ∅125
5 10 3
10
DN50
510 2
∅24j5
165
8
∅235 ∅190
DN100 1)
NPSH (m)
h3
276
18
160
30,9
d
0,5 0
∅22x8
45 15
10
12
14
16
18
Q (m3 /h)
170 215 e2 b2
20
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
5102/7 5103/7 5104/7 5105/7 5106/7 5107/7
Motor Base Coupling kW size plate 5 132S P017 BDS103 6.8 132M 6.8 132M P385 BDS103 10 160M P436 10 160M P487 BDS103 13.5 160L 10 160M BDS103 P487 13.5 160L BDS118 15 180M P538 13.5 160L P538 BDS118 15 180M 15 180M P538 BDS118 17.5 180L
Weight pump set 180 80 232 252 90 292 325 101 347 335 111 357 395 408 121 429 440 132 463
a
b2
c
455 361 25 530
490 30 540
605 610 35 680
610
35
660 755 660 35
d
e1
e2
v
f1
h3
w* 15 700 325 200 -28 220 503 465 1180 1191 740 440 200 1266 24 -28 240 578 540 840 490 215 1353 28 940 550 240 -28 260 653 615 1428 1472 1503 940 550 240 260 28 -28 728 690 1547 1060 600 280 280 1640 260 28 1060 600 280 -28 803 765 1622 280 1715
830 660 35 28 1060 600 280 -28 280
m1
878
m2
840
1790
w1
1100 1140 1270 1420 1420 1620 1620 1620
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 16 / 20
Dimension chart, Pump set drawing and Performance curves CEHA 6100/7 (with retaining stage) H (m) 300
w 1450 rpm
6 1 0 7 6 1 0 6
a
65
G½
6 1 0 5
200
262 4
6 1 0 4 6 10 3
100
6 10 2
G3/8 0 P (kW) 50 40
64
63
m2 m1
172
v f1
6 1 0 7 6 1 0 6
e1 w1
6 1 0 5
30 20
6 10 4
∅18x4
6 10 3
∅145
DN65
6 10 2
∅32j5
180
10
∅190
0
∅235
10
DN100
1)
NPSH (m)
h3
∅22x8
35,3
180
300 20
d
0,5 0 15
∅185
50 15 20
25
30
Q (m3 /h)
195 245 e2 b2
35
c
General:
Values are valid for water ρ = 1 kg/dm3 and ν = 1 cSt.
Design tolerances :
Capacity ± 5% - Delivery head ± 5% - Power + 10%. For designs with a mechanical seal or casing seal of soft Teflon, the tolerance for the delivery head is extended by 2% each.
Pump size
6102/7 6103/7
6104/7
6105/7
6106/7
6107/7
Motor Base Coupling kW size plate 6.8 132M P385 BDS103 10 160M P436 6.8 132M BDS103 10 160M P487 BDS118 15 180M 15 180M BDS118 17.5 180L P538 24 200L BDS135 15 180M BDS118 17.5 180L P538 24 200L BDS135 17.5 180L BDS118 S389 24 200L BDS135 30 225S S609 BDS152 24 200L S389 BDS135 30 225S 14211 BDS152 36 225M
Weight pump set 267 105 307 331 117 363 384 439 130 461 540 450 142 473 485 391 155 470 620 482 167 532 630
a
b2 c d 490 518 30 24 540
e1 740 840
e2 v f1 h3 440 200 -35 260 490 215
m1
m2
571
533
608 610 35 28
940
550 240 -35 280
661
623
751
713
698 660 35 28 1060 600 280 -35
280 300
788 660 35 28 1060 600 280 -35
878
540 730 540
968
740
280
w* 1279 1366 1456 1500 1593
1683
w1 1140 1270
1420
1620
1738 841
300 280 490 300 40 28 1200 -35 300 931 670 310 325 40 28 1200 490 300 300 -35 931 40 28 1300 609 350 345
803
1773
1620 1828 1863 1800 893 1918 2018 1820 2008 1800 983 2003 2000 2080
1)
A safety margin of 1 m has to be added when using a liquid containing gas.
* Dimensions depend upon the motor brand.
Sterling Fluid Systems Pumping Technology CEH-00 / 2003
Page 17 / 20
Notes
It is the policy of Sterling Fluid Systems to seek continually for ways to improve its products and the right is reserved to alter specifications at anytime without prior notice.
Sterling SIHI Side Channel pumps Sterling Fluid Systems offers an extensive Side Channel pump range under its brand name Sterling SIHI. Sterling Fluid Systems has more than 80 years of experience in manufacturing, installation and support of Side Channel pumps. The Sterling SIHI Side Channel pumps can be found in a wide application range for the:
• • • • • • •
Chemical market Pharmaceutical industry Petrochemical industry Food industry Ship yards LPG industry and many more ...
The Sterling SIHI Side Channel pump range 1000
CEH AEH
AEHL ADHL CDHL
100
) m ( d a e h y r e v i l e D
ASH
AOH
AKH AKL AKV
10
DRV
0
AOL
10
20
30
40
3
Capacity (m /h)
The benefits of the Sterling SIHI Side Channel pumps
• • • • • • •
Self priming Gas handling High-resistant materials Performance curve characteristics High efficiency Low NPSHR value Modular hydraulic system
The Sterling SIHI Side Channel pumps comply with the highest demands of our customers and are the best solution for the handling of liquids under critical physical conditions.
Sterling Fluid Systems (Europe) www.sterlingfluidsystems.com/europe Sterling Fluid Systems (Austria) Wien Telephone: +43 (0)1 680 050 Fax: +43 (0)1 680 0521 E-Mail:
[email protected]
Sterling Fluid Systems (Belgium) Groot-Bijgaarden Telephone: +32 (0)2 481 7711 Fax: +32 (0)2 481 7737 E-Mail:
[email protected]
Sterling Fluid Systems (Chech Republic) Olomouc Telephone: +420 (0)587 433 651 Fax: +420 (0)587 433 653 E-Mail:
[email protected]
Sterling Fluid Systems (France) Trappes Telephone: +33 (0)1 34 82 39 00 Fax: +33 (0)1 34 82 39 61 E-Mail:
[email protected]
Sterling SIHI (Germany) Itzehoe Telephone: 49 (0)4821 77101 Fax: 49 (0)4821 771274 E-Mail:
[email protected]
Sterling Fluid Systems (Italy) Monza Telephone: +39 (0)039 2824 1 Fax: +39 (0)039 2824 220 E-Mail:
[email protected]
Sterling Fluid Systems (Greece) Athens Telephone: +302 (0)10 9570783 Fax: +0302 (0)10 9568121 E-Mail:
[email protected]
Sterling Fluid Systems (Hungary) Veszprém Telephone: +36 (0)88 40 66 33 Fax: +36 (0)88 40 66 35 E-Mail:
[email protected]
Sterling Fluid Systems (Romania) Bucuresti Telephone: +40 (0)21 610 7188 Fax: +40 (0)21 210 8287 E-Mail:
[email protected]
Sterling Fluid Systems (Netherlands) Beverwijk Telephone: +31 (0)251 263 232 Fax: +31 (0)251 226 309 E-Mail:
[email protected]
Sterling Fluid Systems (Polska) Warszawa Telephone: +48 (0)22 849 7097 Fax: +48 (0)22 849 6726 E-Mail:
[email protected]
Sterling SAT Dägeling, Germany Telephone: +49 (0)4821 9000-0 Fax: +49 (0)4821 9000-501 E-Mail:
[email protected]
Sterling Fluid Systems (Schweiz) Schaffhausen Telephone: +41 (0)52 6440606 Fax: +41 (0)52 6440616 E-Mail:
[email protected]
Sterling Fluid Systems (Spain) Madrid Telephone: +34 (0)91 709 1310 Fax: +34 (0)91 715 9700 E-Mail:
[email protected]
Sterling Fluid Systems (UK) Altrincham/Cheshire Telephone: +44 (0)161 9286371 Fax: +44 (0)161 9252129 E-Mail:
[email protected]
Sterling Fluid Systems (Americas) www.sterlingfluidsystems.com/americas Sterling Fluid Systems (USA) Grand Island Telephone: (1) 716 773 6450 Fax: (1) 716 773 2330 E-Mail:
[email protected]
Sterling Fluid Systems (Canada) Guelph Telephone: (1) 519 824 4600 Fax: (1) 519 824 7250 E-Mail:
[email protected]
Sterling Fluid Systems (Asia) www.sterlingfluidsystems.com/asia Sterling Fluid Systems (Asia) Singapore Telephone: (65) 68630 828 Fax: (65) 68630 868 E-Mail:
[email protected]
SIHI (Australia) Bayswater Telephone: (61) 3 9720 1500 Fax: (61) 3 9720 4076 E-Mail:
[email protected]
Sterling Fluid Systems (China) Shanghai Telephone: (8621) 6336 3488/6326 4171/6326 4062 Fax: (8621) 63268487 E-Mail:
[email protected]
Sterling Fluid Systems (Malaysia) Selangor Darul Ehsan Telephone: (60) 3 8070 0198/99 Fax: (60) 3 8070 0240 E-Mail:
[email protected]
Sterling Fluid Systems (Philippines) Muntinlupa City Telephone: (63) 2 809 4908 Fax: (63) 2 807 2013 E-Mail:
[email protected]
Sterling Fluid Systems (Thailand) Bangkok Telephone: (66) 2 319 2567 Fax: (66) 2 319 25673/4 E-Mail:
[email protected]
www.sterlingfluidsystems.com