Service Manual: Model

SERVICE MANUAL

MODEL :

SM-100  EDITION st

1 nd 2 rd 3 th 4

Month December March February February

Year 2004 2006 2007 2009

SHANGHAI TERAOKA ELECTRONIC CO., LTD TECHNICAL SUPPORT DEPARTMENT 1rd Floor of 2nd Building, Jia Yuan Business Center, 51# Long Wu Road, Shanghai China 200232. TEL : +86-21-6408-5151 FAX : +86-21-6408-3468 EMAIL ADDRESS :[email protected]

Table of Content 1. GENERAL INFORMATION ........................................................................1

1.1 Overall View ...................................................................................................................................... ............. 1

1.2 Display Panel......................................................................................................................... ......................... 3

1.3 Key Panel......................................................................................................................... .................................. 3

1.4 Thermal Printer Head ............................................................................................................................ 9

1.5 Features ...................................................................................................................................... .......................10

1.6 Specification ........................................................................................................ ..........................................11

1.7 Label Type ...................................................................................................................................... ................12

2. Initial Setup .......................................................................................................... ........13

2.1 Setup ...................................................................................................................................... ..............................13

2.2 Location of Switches and Connectors .................................................................................. 15

2.3 Memory Initialisation.......................................................................................................... .................. 15

2.4 Default Specification Setting ......................................................................................................... 16

3. Calibration ................................................................................. ....................................18

3.1 Calibration Operation .......................................................................................................................... 18

3.2 Exit Calibration ............................................................................................................. .............................19

4. Software Setting ....................................................................................................... 20

4.1 Software Version Upgrade .............................................................................................................. 20

4.2 Specification Setting ..............................................................................................................................32

5. Adjustment................................................................................ ................................... 34

5.1. Peer Sensor Voltage and Label Sensor Sensitivity Adjustment....................34 5.2. Adjustment of Printing Position............................................................................................... 37 5.3. Voltage Checkpoint ..............................................................................................................................38

6. Interface .......................................................................................................... ............... 39

6.1. PC Interface ................................................................................................................. ................................39

6.2. Scale Ethernet Address ..................................................................................................................... 40

6.3. Scale IP Address ...................................................................................................................................... 41

6.4. Connection Method .............................................................................................................................42

6.5. Wire Configuration ...............................................................................................................................44

7. Miscellaneous .......................................................................................................... .. 46

7.1. Mode Change ...................................................................................................................................... .......46

7.2. Span Switch Status....................................................................................................................... ..........46

7.3. Clear All PLU Data ........................................................................................................................... ....46

7.4. Thermal Head Usage ....................................................................................................................... .... 47

7.5. IP ADDRESS ...................................................................................................................................... ......47

7.6. SERVER IP ADDRESS................................................................................................................ .. 47

7.7. SUBNET MASK ....................................................................................................................................4 7

7.8. MAC ADDRESS ................................................................................................................ ....................48

7.9. SERIAL NO ...................................................................................................................................... .........48

8.0. ASCII CHARACTER .......................................................................................................... .............. 49

8. Appendix .......................................................................................................... .................

A. SpecificationList_V200 B. FlexibleL Barcode Setting Guide C. Traceability Setting Guide D. Nutrition Setting Guide E. PC-FL1 Operation Guide F. Circuit

9. Error Message......................................................... .................

4

SM 100

1.

GENERAL

GENERAL

1.1 OVERALL VIEW 

Bench Type



Pole Type



Elevated Type

11

SM 100 

Bench-CS Type



Pole-CS Type



Hand Type

GENERAL

2

SM 100

GENERAL

1.2 DISPLAY PANEL 

25 digits × 19 segments TN type LCD



32 × 202 full dot Matrix Green LCD

1.3

KEY PANEL

 Preset Keys Type ------ B/P 32 Preset keys:

40Preset Keys:

3

SM 100

GENERAL



56 Preset Keys Type ------ PCS(New), PCS+ (New)



74 Preset Keys Type ------ EV, PCS(Old)



76 Preset Keys Type (Hanging)

4

SM 100

GENERAL

ON/OFF KEY

Turn display "ON" or "OFF". PRESET KEY

P1 ~ P40 (B/P) P1 ~ P74 (EV) P1~P32(BCS) P1~P56(PCS) P1~P76(H)

 Set up or call either unit price and tare value.

NUMERIC KEYS

0~9

 Enter numeric data.

TARE KEY  Set or Clear Tare value.  Select "NO" in S and Z Mode.  Item test print in S Mode. CLEAR KEY

C

 For Back space or Clear numeric value.  Select "YES" in S and Z Mode.

RE-ZERO KEY

 Reset weight to ZERO. PREPACK KEY

AUTO

 Switch Manual mode and Pre-pack mode alternatively. (The mode status will be indicated in the P and M indicator.) ▪P - PRE-PACK MODE ▪ M - MANUAL MODE

CHANGE KEY  Calculate the Changed Amount.  Escape the Programming screen without saving data in S Mode.

5

MULTIPLLE KEY

X

 Register the number of Non-Weight products.  Select programming item such as PLU data, Shop Name in S Mode.  Select Report Type in X Mode.  Select Data Transaction Type in Z Mode.

CLERK KEY

V1~V4

 Accumulate the Total Price.

VOID KEY

−

Correct the sales data.

PLU KEY

PLU

 Call up PLU data in R Mode.  Store the programmed data in S Mode.

FEED KEY

 Feed Label or Receipt paper PRINT KEY

 Print out Label or Receipt.

Note: BCS or PCS stands for the scale with cassette.

7

MODE SELECT KEY  Five Modes can be selected using this key. •

Indicator R - REGISTRATION MODE (All the sales transactions are performed.)

•

Indicator X - CHECK MODE (Printing out and sales report.)

•

Indicator S - PROGRAM MODE (Programming preset data, such as products, data, shop name, etc.)

•

Indicator Z - TOTAL MODE (Clear sales data stored.)

•

Indicator X (Blink) - Password Setting Mode (Set PASS WORD for X, S, Z mode, set PASSWORD for PASSWORD MODE when all indicators(R, X, S, Z) blink)

Decrease/Increase Specification Count key

︽,︾

 Decrease/Increase Only used when Setting SPEC 141 & 142

<<,>>

 Select parameter data such as SPEC data. Move cursor left or right.

1.4 Thermal Printer Head  Max Printing With: 56mm

1.5

FEATURES 

Digital printing scale consists of electronic cash registers function and label printing function.



High-speed, high reliability thermal head printer.



Easy paper handing achieved special designed mechanism.



Built-in clock automatically updates data and time.



Quick response to weight changes.



Capacity and Resoultion

Capacity

3kg

6kg

12kg

15kg

30kg

1/3000S,

1/3000S,

1/3000M,

1/3000M,

1/7500S

1/6000S

12lb

15lb

30lb

60lb

1/3000S,

1/3000S,

1/3000S,

1/3000S,

1/3000M,

1/3000M,

1/3000M,

1/3000M,

1/7500S

1/6000S

1/6000S

1/6000S

1/3000S, Resolution

1/3000

1/3000M,

1/3000

1/6000S Capacity

3lb

6lb

1/3000S, Resolution

1/3000M

1/3000

1/6000S Internal count: 1/90000. 

Calibrating by software.



Customer and operator display (optional customer pole display). SM-100: 25 digits x 19 segments TN type LCD with back-light for numeric digit and character display. SM-100+: 32 x 202 full dot Martix Green LCD display.



membrane keys a.

ON/OFF key

b.

10 Numeric keys, to key in numeric data.

c.

Preset keys, to preset PLU or function into the key.

d.

16 Operational keys, to perform various functional operations.



18 data files, Department, Main Group, PLU, etc.



Various reports, PLU daily report, Sales daily report,24 hours daily report, etc.



Ethernet function.



Optional wireless Ethernet bridge.



RS232C interface for data communicate and barcode scanner connection.



Optional cash drawer.



Compact housing. 9

60kg

1/3000

SM 100 1.6

GENERAL

SPECIFICATION

1.6.1 Display SM-100： 25 digits × 19 segment TN type LCD with back-light for numeric digit and character display.  Tare weight display : 4 digits. 

Weight display

: 5 digits.



Unit price display

: 6 digits.



Total price display

: 7 digits.

SM-100+： 32 x 202 full dot Martix Green LCD display. 

Tare weight display

: 4 digits.



Weight display

: 5 digits.



Unit price display

: 6 digits.



Total price display

: 7 digits.

1.6.2 Operating Conditions Power Source

: AC 110V,220V(+10%,-15%), 50~60Hz.

 Operating Temperature

: -10 °C ~ +40 °C.

 Operating Humidity

: 15% ~ 85% RH.

 Power Consumption

: 70 W.

1.6.3 Dimensions 

Platter size Bench, Pole and Elevated : 386(W) x 270(D) mm. Bench-CS and Pole-CS

: 359(W) x 277(D) mm.

Hanging

: 274(d) x 35(h) mm.



Overall size

a)

Bench

: 386(W) x 415(D) x 127(H) mm.

b)

Pole

: 386(W) x 478(D) x 480(H) mm.

c)

Elevated

: 386(W) x 416(D) x 550(H) mm.

d)

Bench-CS

: 380(W) x 360(D) x 162(H) mm.

e)

Pole-CS

: 380(W) x 380(D) x 509(H) mm.

f)

Hand

: 340(W) x 310(D) x 544(H) mm.

10

SM 100 1.7

GENERAL

LABEL TYPE

The label diameter range is from 40 to 105 mm.

Note: Labels must be winding outwards (on top backing paper) and not inwards (under backing paper) within the core (see diagram above). If labels are wound wrongly, printing problem may result. We do not recommend the use of varnish labels.

Label Type T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 S A B C F1 – F99

Dimension (mm) 28 X 56 31 X 56 34 X 56 40 X 56 43 X 56 46 X 56 49 X 56 55 X 56 37 X 56 40 X 56 43 X 56 49 X 56 28 X 37 46 X 37 46 X 37 62 X 37 Free Format

1 11

SM 100

2.

INITIAL SETUP

2.1

SETUP

INITIAL SETUP

¾ Indication of Assemble

1 13

SM 100 ¾

INITIAL SETUP

Bubble Adjustment

Bubble

Place the scale on the flat surface and adjust the four legs until the bubble on the level is in the centre as shown above.

1 14

SM 100

IINITIAL SETUP

2.2 LOCATION OF SWITCHES AND CONNECTORS

Power Switch Fuse Holder

Cash Drawer Port RS232 Port Ethernet Port

Span Switch

2.3

MEMORY INITIALISATION

To clear all memory. OPERATION

DISPLAY

REMARK

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

[Rezero]+[2][3][0]

CLEAR

PLU

FILE

[︾]

CLEAR

VENDER

DATA

Vender transaction data.

[︾]

CLEAR

REPORT

FILES

Report files.

[︾]

CLEAR

MEMORY

DATA

All files in memory.

[*]

CLEAR

MEMORY

Y-C N-T

[C] to clear file data,[T] to quit.

RESET

SALES

DAILY

Return to Z mode.

[C] or [T]

Z1.0

15

Z mode. Lamp Z turns on. PLU file.

SM 100

INITIAL SETUP

2.4 DEFAULT SPECIFICATION SETTING Default SPEC setting of individual country. (Please turn on the span switch before proceed this process.) ¾ Country Set OPERATION

DISPLAY

REMARK

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

[Rezero]+[8][8][2][2]

SPEC

2-STD

COUNTRY

[>>]

SPEC

3-CN

COUNTRY

DEFAULT

SPEC

Y-C N-T

[C]

SCALE

TYPE →

POLE

[X]

SCALE

[*]

SCALE

[X]

SCALE

[*]

SCALE

[X]

SCALE

[*]

CLEAR

MEMORY

Y-C N-T

[C] to clear memory,[T] to skip.

RESET

SALES

DAILY

Return to Z mode.

[*]

[C]

LOAD

Z1.0

TYPE → CAP. → CAP. → RES. → RES. →

BENCH 3KG 6KG 1/3000S 1/3000M

Z mode.Lamp Z turns on. Set country setting. [>>],[<<] or [X] to select country.[*] to update country setting. [C] to load default SPEC setting,[T] to skip. Set scale type. [X],[－] to select type,[*] to update type setting. Set scale capacity. [X],[ － ] to select capacity,[*] to update capacity setting. Set resolution. [X],[ － ] to select resolution,[*] to update resolution setting.

Note 1: For the first using of SM-100,Please take this operation for initialization. Note 2: Enter a number that represent a country in the country list (refer to the table below) to

initialise and country set.

SM 100

INITIAL SETUP

COUNTRY LIST No. Country Code 0 AA 1 U1 2 STD 3 CN 4 HK 5 TW 6 EX 7 KE 8 AR 9 SF 10 CS 11 GC 12 TU 13 CV 14 HG 15 PL 16 UR 17 AS 18 DM 19 FL 20 NW 21 SD 22 PG 23 UK 24 IL 25 IL (LB) 26 CA 27 CA (LB) 28 AG 29 MX 30 BZ 31 CE 32 EA 33 JD 34 LN 35 IRN 36 CR 37 TL 38 EC 39 NL 40 BG

Country Japan U.S.A. Standard China Hong Kong Taiwan Export Korea Australia And New Zealand South Africa Cyprus Greece Turkey Czech Republic Hungary Poland Russia Austria Denmark Finland Norway Sweden Portugal United Kingdom Ireland (Kg) Ireland (Lb) Canada (Kg) Canada (Lb) Argentina Mexico Brazil Chile Egypt Jordan Lebanon Iran Canary Islands Thailand European Community Netherlands Belgium

No. Country Code 41 SA 42 IC 43 IE 44 CB 45 KY 46 IR 47 VY 48 MS 49 SN 50 VZ 51 CO 52 MA 53 FR 54 WG 55 BL 56 BW 57 CP 58 LS 59 MU 60 MW 61 MZ 62 NM 63 RE 64 SH 65 SW 66 WZ 67 ZW 68 AE 69 TT 70 UD 71 LV 72 CVS 73 SK 74 SV 75 UA 76 KZ 77 IT 78 SZ 79 ID 80 CD

17

Country Saudi Arabs Iceland Indonesia Cuba Kenya Israel Slovenia Malaysia Spain Venezuela Croatia Macedonian France Germany Bulgaria Botswans Comores Lesotho Mauritius Malawi Mozambique Namibia Reunion Seychelles Swaziland Zimbabwe Zambia U.A.E Trinidad and Tobago Uganda Latvia Slovakia Sri Lanka Slovenia Ukraine Kazakhstan Italy Switzerland India New Caledonia

SM100

3.

CALIBRATION

CALIBRATION

Prior to Calibration, please refer that the specification indicating weight capacity, minimum graduation, and load cell sensitivity are correctly set. Caution: z It can only work when SPAN SWITCH is on (ENABLE). Before Calibrating, please enter Z mode.

3.1 CALIBRATION OPERATION

OPERATION

Press SPAN SWITCH

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

[Rezero]+[8][7][1][5]

After storing the zero

is

on

(ENABLE). [8][7][1][5]

while

Calibrating zero point.

CAL SP

Point ‘IR’ count Put full capacity weight

Calibrating Span.

------

on platter.[*] After calibration

SWITCH

depressing [Rezero].

------

platter,[*]

SPAN Enter

CAL 00

Ensure no weight on

REMARK

Z1.0

RESET

SALES

DAILY

18

Go back to Z mode. Lamp Z always light.

SM100

CALIBRATION

3.2 EXIT CALIBRATION

OPERATION

Press SPAN SWITCH

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

[Rezero]+[8][7][1][5] [T] [Rezero]+[8][7][1][5]

SALES

DAILY

Z1.0

RESET

on(ENABLE). [8][7][1][5]

while

Escape to Z mode. Lamp Z always light the zero point ‘IR’ count. Calibrating Span.

CAL SP

Point ‘IR’ count

is

The ‘IR’ count will be taken as

------

After storing the zero

SWITCH

depressing [Rezero].

CAL 00

[*]

[T]

RESET

SPAN Enter

CAL 00 Z1.0

REMARK

SALES

19

DAILY

Escape to Z mode. Lamp Z always light.

SM 100

SOFTWARE SETTING

4

SOFTWARE SETTING

4.1

SOFTWARE VERSION UPGRADE

 Update Method Introduction SM-100 use flash RAM instead of EPROM for the main program storage of the scale. Before the boot program Version 1.10, we just have one method to update the scale’s software: PC to scale via RS232 interface. After the boot program Version 1.10 (including V1.10), we add a new method to update the scale’s software: update the scale by ethernet. So you can choose either method between these two ones to update your scale. Now we will set two parts to introduce the steps of these two updating methods.

 Update Steps Introduction I. Ethernet Update Method 1. Cable & Connection There are also two ways to connect the PC and the scale in updating the scale by ethernet. 1) PC to Scale

Crossing Twisted Cable PC

Sm-100

2) Connect by Hub Normal Twisted Cable

PC

Normal Twisted Cable

HUB

20

Sm-100

These two twisted cable obey the EIT/TIA 568 standard. 1 2 3 4 5 6 7 8

T568A line series Green &White Green Orange & White Blue Blue & White Orange Brown & White Brown

1 2 3 4 5 6 7 8

T568B line series Orange & White Orange Green &White Blue Blue & White Green Brown & White Brown

crossing twisted cable: one end with T568A line series, another with T568B line series normal twisted cable: two ends both with T568B line series 2. PC Setting & Programmer Version We use “Mini Programmer (Version 2.00)” as the tool to update the scale. As it needs a default visual IP address for the PC by this kind of update method, You must set your PC’s IP address within the range of 10.10.10.1-----10.10.10.240, before you start the software to update the scale. If you don’t set the IP address like this, you can see an alarm window as Pic. 1 when you start “Mini Programmer”.

Pic. 1 3. Updating Steps 1) How to start ethernet updating? A. Turn on the switch on the bottom of the scale. B. Power off the scale by pressing On/Off Key. C. After that, press and hold [Re-Zero] and [Preset 22], then start the scale by pressing the On/Off Key. D. The screen will display the version of the current boot program for two seconds. E. Only in new versions(version of the boot program newer than 1.10), you can choose 2-ethernet. 2) Display on the scale’s screen A. If you choose 2 and the scale’s connection is correct, it will display “waiting for connect”. B. Then the message on the scale’s screen is “getting IP address”. C. After this, it will display “001 scale ready update”. D. You can’t stop it unless you press On/Off key. If you want to continue updating. You also don’t need to press any key on the scale until Mini Programmer begin to run.

3) How to upload the scale by Mini Programmer? A. Select SM-100 and press “ok”

B. Set the port

Select “ethernet” and press “OK”

C. Download boot program and update the scale Select menu “File->Load File To Programmer Buffer”

Open the source file of boot program (e.g. sm100bv100.hex)

You can see a speed mode select window here.

Select menu “Flash->Program”

Notice: The message “001 scale ready update” must be displayed on the screen of the scale before pressing the “run” button.

After the transmission has completed, select menu “File->Clear Buffer”.

Notice: 1.If the boot program of this version is already in the scale, you don’t need to upload it again, skip it and upload the main program. 2.If the scale is updated from 1.xx to 2.xx,firstly you must update the boot program of the version. D. Download main program file You must power off the scale and start the ethernet upload method again when you have finished a program uploading. The steps of uploading the main program file is also like uploading the boot program file. The file you need to open is like Pic. 2

Pic. 2

E. Download word-stock file The steps of uploading the word-stock file is also like uploading the boot program file. The file you need to open is like Pic. 3

Pic. 3 F. Download const text file The steps of uploading the const text file is also like uploading the boot program. The file you need to open is like Pic. 4

Pic. 4 G. Exit Mini Programmer Note: please update the scale according to sequence above.

RS232C Method 4. Cable Connection 3 Pins are used for data transmission between PC and SM-100 9 Pin D-Sub Female Connectors for this cable:

PC Serial Port 9 Pin D-Sub (Female)

Pin 1 2 3 4 5 6-9

Signal N.C. RXD TXD N.C. GND GND

SM-100 RS-232C 9 Pin D-Sub (Female)

Signal N.C. RXD TXD N.C. GND N.C.

Pin 1 2 3 4 5 6-9

5. Update Steps 1) How to start RS232C updating A. Turn on the switch on the bottom of the scale. B. Power off the scale by pressing the On/Off Key. C. After that press and hold [Re-Zero] & [Preset 22], then start the scale by press ing the On/Off Key. D. It will display the version of the current boot program for two seconds.

E.

 If the scale boot version is newer than 1.10, it will display a updating method choice like “1-RS232 2-ETHERNET” on the screen. you can press Numeric 1 to choose 1-RS232C.  If the boot version is older than 1.10, the scale will not display the choice. F. Then the Scale will display “PROGRAM”. You can’t stop it, unless you press Tare or On/Off Key. 2) Start Mini Programmer 1.

Select SM-100 and press “Ok”

2.

Set the Port:

Select RS232 and press “OK”

3.

Download the boot program and update the scale Select menu “File->Load File To Programmer Buffer”

Open the source file of the boot program (e.g. sm100bv100.hex)

Select menu “Flash->Program”

Notice: The message “001 scale ready update” must be displayed on the scale before pressing the “run” button.

After the transmission has completed, select menu “File->Clear Buffer”.

Notice: If the boot program of this version is already in the scale, you don’t need to upload it again, skip it and upload the main program.

4. Download main program file You must power off the scale and start the ethernet upload method again when you have finished a program uploading. The steps of uploading the main program file is also like uploading the boot program file. The file you need to open is like Pic. 2

Pic. 2 5. Download word-stock file The steps of uploading the word-stock file is also like uploading the boot program file. The file you need to open is like Pic. 3

Pic. 3 6. Download const text file The steps of uploading the const text file is also like uploading the boot program. The file you need to open is like Pic. 4

Pic. 4 7.

Exit Mini Programmer

4.2

SPECIFICATION SETTING Before Specification setting, please press the mode button to enter Z mode. The detail specification list , please see the appendix.

4.2.1

Customer SPEC Setting

To change setting of the Customer SPEC if there are some SPEC setting in it need to be alter. OPERATION

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

XXX

XXX

(setting)

(former)

SPEC 001

XXX

XXX

SPEC 000

XXX

XXX

[1][7]

SPEC 000

017

XXX

[X]

SPEC 017

XXX

XXX

[>>]

SPEC 017

XXX

XXX

[<<]

SPEC 017

XXX

XXX

[1]

SPEC 017

001

XXX

[*]

SPEC 018

XXX

XXX

[C]

SPEC 018

000

XXX

RESET

SALES

DAILY

[Rezero]+[1][4][1]

SPEC 000

[︾]

[︽]

[PLU] * Note 1

* Remark:

4.2.2

Z1.0

REMARK Z mode. Lamp Z turns on. Enter [1][4][1] while

depressing

[Rezero]. XXX:SPEC data [ ︾ ]key only increase specification count, it does not update SPEC data. [︽]key only decrease specification count, it does not update SPEC data. It goes to a designed specification count. (000~441 is enabled) [>>] key select SPEC data. Move cursor right. [<<] key select SPEC data. Move cursor left.

Clear the enter data. Store the updated specification and escape to Z mode.

The Weight in the display window will display the SPEC number. The Unit Price window will display the new value setting entered. The Total Price window will display the old value setting. The selection you have made will be highlighted in the dot matrix display. Please use [︾] to increase spec count, [︽] to decrease spec count, [*] to store a new value and [PLU] to save spec setting.

Weight & Measurement SPEC Setting

To change the setting of the Weight & Measurement SPEC if there are some SPEC need to alter. (Please turn on the span switch when using this process) OPERATION

DISPLAY

REMARK

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

XXX

XXX

(setting)

(former)

SPEC 601

XXX

XXX

SPEC 600

XXX

XXX

[6][1][5]

SPEC 600

615

XXX

[X]

SPEC 615

XXX

XXX

[>>]

SPEC 615

XXX

XXX

[<<]

SPEC 615

XXX

XXX

[1]

SPEC 615

001

XXX

[*] key to update specification,

[*]

SPEC 616

XXX

XXX

increase specification count.

[2]

SPEC 616

002

XXX

[C]

SPEC 616

000

XXX

RESET

SALES

DAILY

Press SPAN SWITCH [Rezero]+[1][4][2]

SPEC 600

[︾]

[︽]

[PLU] * Note 1

Z1.0

SPAN SWITCH is on(ENABLE). Enter [1][4][2] while

depressing

[Rezero]. XXX:SPEC data [ ︾ ]key only increase specification count, it does not update SPEC data. [︽]key only decrease specification count, it does not update SPEC data. It goes to a designed specification count. (600~709 is enabled) [>>] key select SPEC data. Move cursor right. [<<] key select SPEC data. Move cursor left.

Clear the enter data. Store the updated specification and escape to Z mode.

Note 1: If press [T] key, it does not store the updated specification and escape to Z mode.

* Remark:

The Weight in the display window will display the SPEC number. The Unit Price window will display the new value setting entered. The Total Price window will display the old value setting. The selection you have made will be highlighted in the dot matrix display. Please use [︾] to increase spec count, [︽] to decrease spec count, [*] to store a new value and [PLU] to save spec setting.

SM100

ADJUSTMENT E

5.

ADJUSTMENT

5.1

PEEL SENSOR VOLTAGE AND LABEL SENSOR SENSITIVITY ADJUSTMENT

Label Sensor

LOCATION OF PEEL AND LABEL SENSOR

SM100 5.1.1

ADJUSTMENT

Peel Sensor Voltage

To set the peel sensor voltage if the peel sensor is not working normally in some situations like temperature and humidity change. OPERATION

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

REMARK Z mode. Lamp Z turns on. Enter [5][1][5] while depressing

[Rezero]+[5][1][5]

PEEL

PFD

0.5

0.0

[Rezero]. ﹩/kg window displays label paper peel sensor voltage, ﹩ window displays new setting value.

[T]

5.1.2

Z1.0

RESET

SALES

DAILY

[T] key to exit.

Label Sensor Sensitivity

Adjust here for sensor

When the label came out three or more when feeding or printing, the sensitivity of the sensor need to be adjusted to sense the gap between the label better. There is a variable resistor near the sensor. Adjust it to increase or decrease the sensitivity. Clockwise is to increase the sensitivity and anti-clockwise is to decrease the sensitivity.

SM100

ADJUSTMENT

OPERATION

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

REMARK Z mode. Lamp Z turns on. Enter [5][1][6] while depressing [Rezero]. ﹩/kg window

[Rezero]+[5][1][6]

GAP

PFD

2.0

3.1

displays label paper gap sensor voltage, ﹩window displays new setting

[T]

Z1.0

RESET

SALES

DAILY

value. [T] key to exit.

SM100 5.2

ADJUSTMENT

ADJUSTMENT OF PRINTING POSITION

This function is used to adjust the print position on label. OPERATION

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

REMARK Z mode. Lamp Z turns on. Enter [5][1][4] while

[Rezero]+[5][1][4]

ADJ

PFD

0

0

depressing

[Rezero]. ﹩/kg window display old setting, ﹩ window display new setting. To move up the point position on

[1][0]

ADJ

PFD

0

10

label, enter the new value by numeric key (Ex. 10 dots). If you want to move down the print

[1][0][－]

ADJ

PFD

0

－10

position, please enter the new value by numeric key (Ex. 10dots), and then press [−] key.

[PLU]

0.000

0.000

0.00

0.00

[T]

Z1.0

RESET

SALES

DAILY

PRINTING TOO HIGH (ADJUST DOWNWARD)

CORRECT POSITION

Save the feed setting. If you want to exit without saves the setting, press [T] key to exit.

PRINTING TOO LOW (ADJUST UPWARD)

SM100 5.3

ADJUSTMENT

VOLTAGE CHECKPOINT

There are several voltage checkpoints on the PCB boards. Below are some reference voltage points that are commonly use. VOLTAGE POINT VCC

VOLTAGE 3.3 V

PURPOSE Provide voltage for most of the IC

VTH

24 V

Provide voltage mainly to the thermal head

VBB

3V

Provide backup voltage for the RAM IC

HVcc

5V

The tolerance of all the voltage is about ± 5% except VTH is +2% and -5%

SM100

6.

INTERFACE

6.1

PC INTERFACE

INTERFACE

SM 100 can be connect to PC through Ethernet interface and RS232C. See below for the connection method. CONFIGURATION OF PC ETHERNET CARD Window version client driver Any Ethernet cards can be used for PC running the Window version client driver Windows 98 My Computer → Control Panel → Network→TCP/IP of Ethernet card (Select Properties) IP address : 192.168.1.XXX ------ XXX - can be any number. But preferable 100 to 255. Submask : 255.255.255.0 Above IP address is use as a standard address to use for SM 100 Ethernet communication. If whatever reason, the IP address had to be change, it may do so. But the scale IP address had to be change at the SM 100 scale also so that they are within the same network. Eg. If the computer IP address is 192.168.1.XXX, the SM 100 scale IP address has to be change to 192.168.1.XXX. The last three digits of the IP address should not be similar within the computer and scales at all time. As can see the first three set of number of the IP address of the computer and scale must be the same.

39

SM100

INTERFACE

Before setting the SPEC setting of the scale, please check below.

6.2

SCALE ETHERNET ADDRESS

The main board have a Scale Ethernet Address that is set during production. This address is a hardware setting for Ethernet communication. But when changing a new main board, the new main board did not have any this address. If the scale is using Ethernet communication, a Scale Ethernet Address is needed apart from software IP address. Please take note that the Scale Ethernet Address can only input once after saving. Please view and note down the Scale Ethernet Address of the old main board before changing the new main board. Below procedure is to view and input the Scale Ethernet Address. Please turn on the span switch before proceed. KEY TO PRESS PT

kg

DISPLAY ＄/kg

OPERATION ＄

Go to Z mode [REZERO] + [0][6][1][2]

Z1.0 ETHER

RESET NET

SALES …….

Daily …….

[0][0][0][6][C][0] [0][0][0][0][2] [4] [PLU]

ETHER

NET

0006C

0000024

Z1.0

RESET

SALES

Daily

[T]

Z1.0

RESET

SALES

Daily

Power off the scale * IMPORTANT :

6.3

At Z mode Viewing of Ethernet address For new main board, it can act as input of the address if the address shown …….. Else it would not let you to input. For input only. Enter Ethernet address e.g. 0006C 0000024 Save address and escape to Z mode. After saving it will not be able to input again. Escape to Z mode without saving. Turn off the power and do the memory clear process.

Please take note that this is a one time setting. It cannot be change after setting it. Please check the old address and input accordingly. As same internal Ethernet address in a network may conflict during communication.

SCALE IP ADDRESS 40

SM100

INTERFACE

This is to set the IP address for PC communication using Ethernet for specific IP address. It should not be confused with the Scale Ethernet Address as above. The Scale Ethernet Address is mainly for hardware and Scale IP Address is for software. The software when communicating to the scale must specify the same IP address on the scale else it will give error. The default is 192.168.000.000 where the last three digit will change when SPEC 135 change. Please turn on the span switch before proceed. KEY TO PRESS PT

kg

DISPLAY ＄/kg

OPERATION ＄

Go to Z mode [REZERO] + [0][4][1][6] [1][9][2][1][6][8] [0][0][1][0][1][6]

Z1.0 SCALE

RESET IP

SALES …….

Daily …….

SCALE

IP

192168

001016

[PLU]

Z1.0

RESET

SALES

Daily

[T]

Z1.0

RESET

SALES

Daily

41

At Z mode Input or viewing of IP address Enter IP address e.g. 192.168.001.016 ( The last 3 digits cannot be input as it will change when SPEC 135 change) Save address and escape to Z mode Escape to Z mode without saving.

SM100 6.4

INTERFACE

CONNECTION METHOD

6.4.1 RS232C Interface with PC PC

Scale

Com 1 / Com 2

RS232C Port

* Note : Only 1 scale can be connect in this method. SPEC setting on scale : SPEC 48

Scale number (For 4 line / RS232C port)

Enter number between 1 to 999,999

SPEC 51 0 1

1200 2400

6

76800

SPEC 52 0

7 bit

SPEC 53 0

None

SPEC 54 0

1 bit

Baud rate for SIO (RS232C port) 2 3

4800 9600

4 5

19200 38400

2

Even

Data length for SIO (For RS232C port) 1

8 bit

Parity for SIO (For RS232C port) 1

Odd

Stop bit for SIO (For RS232C port) 1

2 bits

6.4.2 Ethernet Connection (Ethernet Interface) 42

SM100

INTERFACE

Scale #1

Scale #2

Scale #3

Scale #4

Scale #5

PC HUB

SPEC setting on scale : SPEC 49 0 1 2

SPEC 50 0 1

CLIENT / SERVER INTERFACE

No interface Ethernet - Coaxial Cable Ethernet - Twisted Cable

Not used 4 lines, RS485 (For future use)

2

Back-up server

CLIENT / SERVER

Client Server / Workstation

SPEC 135

3 4

PORT NUMBER

* Enter number from 1 to 254

43

SM100 6.5

INTERFACE

WIRE CONFIGURATION

6.5.1 Ethernet Wire - Straight Cable and Crossover Cable Straight cable is for Client / Server connection. Crossover cable is for Hub to Hub connection. (Some models of the hub do not need crossover cable for hub to hub connection. Please refer to the hub operation manual if in doubt) Telephone Modular Plug (Category 5) -

Preferable type :

CviLux CJP3 / CviLux CJP4 (with insert bar)

CABLE TYPE Cable type

:

4 pair 100MHz Cat.5 AWG 24 or 26 UTP / FTP / STP.

Preferable type :

Cat. 5 AWG 24 or 26 FTP / Cat. 5 AWG 24 or 26 STP (Recommended for CISPR 22B conformance)

PIN CONFIGURATION 1

8

SM 100

HUB 8

1 Solder to braid wire of the Ethernet wire if using plug without insert bar

1

8

SM 100 8

HUB Solder the braid wire of the Ethernet wire if using plug with insert bar

STRAIGHT CONNECTION SCALE PIN SIGNAL 1 TX+ 2 TX3 RX+ 6 RX5,7,8 N.A.

1 CROSSOVER CONNECTION

HUB

HUB

SIGNAL PIN TX+ 1 TX2 RX+ 3 RX6 N.A. 5,7,8

PIN SIGNAL 1 TX+ 2 TX3 RX+ 6 RX5,7,8 N.A.

44

HUB SIGNAL PIN TX+ 3 TX6 RX+ 1 RX2 N.A. 5,7,8

SM100

INTERFACE

6.5.2 RS232C Wire PC (9 PIN) TO SCALE RS232C PORT

RS232C Port（9 Pin）

Pin 1 2 3 4 5 6 7 8 9

PC COM Port（9 Pin） PC

RS-232 输出

输入 Not used TXD RXD Not used GND Not used Not used Not used Not used

Not used RXD TXD DTR GND DSR DTR DSR Not used

6.5.3 Cash Drawer Connector SM-100 uses normal phone mike plug to connect cash drawer and the scale. 1 pin

1 pin

4 pin

4 pin

Plug in the scale Pin Output 1 Not used. 2 +8V 3 GDD 4 Not used.

Connector of Cash Drawer Input Pin Not used 1 Voltage + 2 GDD 3 Not used 4

45

Pin 1 2 3 4 5 6 7 8 9

SM 100

MISCELLANEOUS

7.

MISCELLANEOUS

7.1

MODE CHANGE

To toggle between R, X, S, Z and Password mode. OPERATION

DISPLAY PT

kg

＄/kg

＄

0.000

0.000

0.00

0.00

[MODE],[MODE]

XMODE

(within 3 seconds)

REMARK Weight mode.Lamp R turns on. Enter X mode.Lamp X turns on.

[MODE]

S1

→

PLU

FILE

Enter S mode.Lamp S turns on.

[MODE]

Z1.0

RESET

SALES

DAILY

Enter Z mode.Lamp Z turns on.

PWD X

0

SET

0.000

0.00

0.00

[MODE] [MODE]

0.000

Enter Password Set mode.Lamp X flicker Back to Weight mode.Lamp R turns on.

** The “X ” mark on the X, S, Z and R mean the indicator light is on. When in Passwomode, indicator light will be blinking.

7.2

the

SPAN SWITCH STATUS

To check the status of the span switch. OPERATION

Go to Z mode

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

STE16

VX.XX

S-OFF

RESET

SALES

DAILY

[Rezero]+[2][8][4] Z1.0

7.3

REMARK Z mode. Lamp Z turns on. Enter

[2][8][4]

while

depressing

[Rezero]. Exit after 3 seconds.

CLEAR ALL PLU DATA

To clear all the PLU data only, the span switch status must be on. OPERATION

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

[Rezero]+[2][3][0]

CLEAR

PLU

FILE

*

CLEAR

PLU

Y--C N--T

RESET

SALES

DAILY

Go to Z mode

C(T)

7.4

Z1.0

THERMAL HEAD USAGE 46

REMARK Z mode. Lamp Z turns on. Enter

[2][3][0]

while

depressing

[Rezero]. Enter C for Yes, Enter T for No.. Back to Z mode

SM 100

MISCELLANEOUS

To check how many time the thermal head had been printing. OPERATION

Go to Z mode

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

PRINTER

USAGE

5

RESET

SALES

DAILY

[Rezero]+[0][8][2][3] [T]

7.5

Z1.0

REMARK Z mode. Lamp Z turns on. Display thermal printer usage condition(meter). [T] key to exit.

IP ADDRESS

To check and modify the scale IP address. DISPLAY

OPERATION

Go to Z mode [Rezero]+[0][4][1][6] [1][9][2][0][0] [9][1][0] [0]

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

SCALE

IP

19216800

0000

SCALE

IP

19200910

0000

[#]

7.6

----------

REMARK Z mode. Lamp Z turns on. Display the scale IP address. Modify the IP address. Save the new IP address. Press [T] key to exit.

SERVER IP ADDRESS

To check and modify the server IP address. OPERATION

Go to Z mode [Rezero]+[0][4][1]7] [1][9][2][0][0] [9][1][0] [0]

DISPLAY PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

SERVER

IP

25525525

5000

SCALE

IP

19200910

0000

[#]

7.7

----------

SUBNET MASK 47

REMARK Z mode. Lamp Z turns on. Display the server IP address. Modify the server IP address. Save the new IP address. Press [T] key to exit.

SM 100

MISCELLANEOUS

To check and modify the subnet mask. DISPLAY

OPERATION

Go to Z mode [Rezero]+[0][4][1]8] [1][9][2][0][0] [9][1][0] [0]

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

SERVER

IP

25525525

5000

SCALE

IP

19200910

0000

[#]

REMARK Z mode. Lamp Z turns on. Display the server IP address. Modify the server IP address. Save the new IP address.

----------

7.8

Press [T] key to exit.

MAC ADDRESS

To check the MAC address. Please turn on the span switch before proceed. DISPLAY

OPERATION

Go to Z mode

[Rezero]+[0][6][1]2] [T]

7.9

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

ETHERN ET Z1.0

0006C071

96BE

SALES

DAILY

RESET

REMARK Z mode. Lamp Z turns on. Display the MAC address. Press [T] key to exit.

SERIAL NO

To check the serial NO.. DISPLAY

OPERATION

Go to Z mode

PT

kg

＄/kg

＄

Z1.0

RESET

SALES

DAILY

SCALE

S/N

05386686

RESET

SALES

DAILY

[Rezero]+[1][1][1] [T]

Z1.0

REMARK Z mode. Lamp Z turns on. Display the serial NO.. Press [T] key to exit.

8.0 ASCII CHARACTER Below are the common use of characters of ASCII code in HEX value. Please enter the hex value when entering commodity name, advertisement, shop name, clerk name, special message, ingredient, text etc. when using the SM-100. A

B

C

D

E

F

G 48

H

I

J

K

L

M

SM 100

MISCELLANEOUS 41 N 4E a 61 n 6E 0 30 $ 24 > 3E

42 O 4F b 62 o 6F 1 31 % 25 = 3D

43 P 50 c 63 p 70 2 32 ^ 5D / 2F

44 Q 51 d 64 q 71 3 33 & 26 ? 3F

45 R 52 e 65 r 72 4 34 * 2A · 2E

46 47 48 S T U 53 54 55 f g h 66 67 68 s t u 73 74 75 5 6 7 35 36 37 : ( ) 28 29 3A Space , 2C 20

49

49 V 56 i 69 v 76 8 38 ; 3B

4A W 57 j 6A w 77 9 39 " 22

4B X 58 k 6B x 78 ! 21 ' 27

4C Y 59 l 6C y 79 @ 40 + 2B

4D Z 5A m 6D z 7A # 23 < 3C

Specification List

TITLE REVISION NO. ISSUED DATE Rev. No. 0

nd

2

SM-100 V2.00

: : :

26 December, 2006

SM-100 SPECIFICATION LIST 0 17 August, 2004 Modification Details

First Release

R&D Dept, SHANGHAI TERAOKA ELECTRONIC CO., LTD.

Software Version 1.00

1 of 32

Specification List SPEC NO.

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION

SM-100

CUSTOMER SPECIFICATION [REZERO] + [1][4][1] 00

01

02 03 04 05 06 07

08

09 10 11

12 13 14 15 nd

2

Item Barcode 0 F1F2 CCCCC XCD XXXX CD 1 F2 CCCCCC XCD XXXX CD 2 F1F2 CCCCC 0 XXXX CD 3 F1F2 CCCCCC XXXX CD 4 F1F2 CCCCC XXXXX CD 5 F2 CCCCCC XXXXX CD 6 F2 CCCCC XXXXXX CD 7 F1F2 CCCCCCCCCC CD #1 8 F1F2 CCCC XXXXXX CD 9 F1F2 CCCCC CD #2 10 F2 CC XXXX CD #3 11 No Barcode 12 F1X2 CCCCC XCD XXXX CD Right Side Data of Item Barcode 0 Quantity 1 Price 2 Weight 3 User Programmable # Right Side Price Data of Item Barcode 0 Price before Tax

9 13 14 15 16 17 18 19 20

F1X2 CCCCCC XXXX CD F1F2 CCCC XCD XXXXX CD F2 CCCCC XCD XXXXX CD F1F2 CCC XXXXXXX CD F1F2 CC XXXXXXXX CD CCC WWWW PPPPP CD No Barcode F1F2 CCCCC PCD XXXX CD

4 5 6 7

Original Price Weight / Quantity Unit Price Unit Price after discount

1

Price after Tax

All are 13 digits non-PLU barcode unless otherwise stated. #1 13 digits PLU barcode #2 8 digits PLU barcode #3 8 digits non-PLU barcode

9 # Related to SPEC153.

9 Effective when SPEC1 = 1

Flag Data F1 and F2 for 13 Digits Non-PLU Barcode Enter value from range 0 to 99 Flag Data F1 and F2 for 13 Digits PLU Barcode Enter value from range 0 to 99 Flag Data F2 for 8 Digit Non-PLU Barcode Enter value from range 0 to 9 Flag Data F1 and F2 for 8 Digit PLU Barcode Enter value from range 0 to 99 Total Barcode 0 F1F2 CCCCC XCD XXXX CD 12 F1X2 CCCCC XCD XXXX CD 1 F2 CCCCCC XCD XXXX CD 13 F1X2 CCCCCC XXXX CD 2 F1F2 CCCCC 0 XXXX CD 14 F1F2 CCCC XCD XXXXX CD 3 F1F2 CCCCCC XXXX CD 15 F2 CCCCC XCD XXXXX CD 4 F1F2 CCCCC XXXXX CD 16 F1F2 CCC XXXXXXX CD 5 F2 CCCCCC XXXXX CD 17 F1F2 CC XXXXXXXX CD 6 F2 CCCCC XXXXXX CD 18 CCC WWWW PPPPP CD 7 F1F2 CCCCCCCCCC CD #1 19 No Barcode 8 F1F2 CCCC XXXXXX CD 20 F1F2 CCCC PCD XXXX CD 9 F1F2 CCCC CD #2 10 F2 CC XXXX CD #3 11 No Barcode Left Side Data of Total Label 0 Scale No. 3 Clerk No. 1 Last Accumulated Item Code 4 Fixed No. 2 Receipt No. Fixed Data for Left Side Data of Total Barcode Enter value from range 0 to 9 999 999 999 Flag Data F0, F1 and F2 for Total Barcode Enter value from range 0 to 999 Right Side Data of Total Barcode 0 Quantity 2 Weight 1 Price

9

Total Barcode Print on Receipt 0 No 1 Yes Print Readable Character of F1 for Item and Total Barcode (for EAN only) 0 No Print 1 Print

9

Printing Position for Advertisement Message 0 First Line 2 Above 1 Below 3 Not Used Turnover Printing for Advertisement Message 0 No 1 Yes

9


9 9 9 9 All are 13 digits non-PLU barcode unless otherwise stated. #1 13 digits PLU barcode #2 8 digits PLU barcode #3 8 digits non-PLU barcode

9

9 9 9

8

2 of 32

Specification List 16

17 18 19

20 21 22 23 24

25

26 27 28 29 30 31 32

33 34 35

nd

2

SM-100 V2.00

26 December, 2006

Exit from “Change” Mode within Specified Interval 0 No 3 10 sec 1 3 sec 4 15 sec 2 6 sec Order of the Month, Day and Year for Print 0 MM/DD/YY 2 YY/MM/DD 1 DD/MM/YY 3 Not Used 1 or 2 Line(s) Commodity Name on Receipt 0 2 Lines 2 No Print 1 1 Line Label Printing by Clerk Key 0 No Print 2 Print without Accumulated 1 Print with Accumulation Total Label Printing 0 No Print 1 Print Printing Operator Name on Receipt and Label 0 Code 1 Name Receipt Paper Width 0 60 mm 2 50 mm 1 40 mm Manual Price Entry for Printing or Accumulating 0 Allow 1 Inhibit Default Label Format for Item Printing 0 T1 (A) 12 S (T7) 1 T2 (B) 13 A (T8) 2 T3 (C) 14 B (T9) 3 T4 (U2) 15 C (T10) 4 T5 (U3) 16 F1 (F1) 5 T6 (U4) 17 F2 (F2) 6 T7 (U5) 18 F3 (F3) 7 T8 (U6) 19 F4 (F4) 8 T9 (U7) 20 F5 (F5) 9 T10 (U8) 21 F6 (F6) 10 T11 (T5) 22 F7 (F7) 11 T12 (T6) 23 F8 (F8) Default Label Format for Total Printing 0 T1 (A) 12 S (T7) 1 T2 (B) 13 A (T8) 2 T3 (C) 14 B (T9) 3 T4 (U2) 15 C (T10) 4 T5 (U3) 16 F1 (F1) 5 T6 (U4) 17 F2 (F2) 6 T7 (U5) 18 F3 (F3) 7 T8 (U6) 19 F4 (F4) 8 T9 (U7) 20 F5 (F5) 9 T10 (U8) 21 F6 (F6) 10 T11 (T5) 22 F7 (F7) 11 T12 (T6) 23 F8 (F8) Shop Name Printing on Label 0 No Print 1 Print Forced Tare Function 0 Disable 1 Enable Peel Sensor Function in Prepack Mode 0 Disable 1 Enable Continuous Print for Label in Prepack Mode 0 Inhibit 1 Allow Selection of CDV 0 Inhibit 1 Allow CDV Type 0 CDV 1 Tear-off CDV Modulus 0 Modulus 10 1 Modulus 11

9

On Spot Correction 0 Allow Search Correction 0 Allow Move Back Correction 0 Allow

9 1

Inhibit

1

Inhibit

1

Inhibit

9

9

9

9 9 8

9 9 Formats in ( ) are for U1 and CA only. F1 to F8 are Free Format.

9 Formats in ( ) are for U1 and CA only. F1 to F8 are Free Format.

9 9 9 9 8 For SF only.

8 For SF only.

8 For SF only. Effective when SPEC30 and 31 = 1.

8 9


3 of 32

Specification List 36 Past Sales Data Correction 0 Allow 37 Label Print Density 0 Low 1 Mid 38 Receipt Print Density 0 Low 1 Mid 39 40 41 42 43 44 45 46 47 48 49

50

51

52

53

54

55

56 57

58

nd

2

SM-100 V2.00 1

Inhibit

2 3

High-mid High

2 3

High-mid High

26 December, 2006 9

9

Calling of PLU 0 Manual 2 Time-out 1 Auto PLU Digits for Auto PLU Calling/Time-out Calling 0 3 Digits / 0.5 sec 2 5 Digits / 1.5 sec 1 4 Digits / 1.0 sec 3 6 Digits / 2.0 sec Unit Price of Weigh PLU Can Use for Price of Non-weigh PLU and Vice Versa 0 Allow 1 Inhibit

9

Unit Price Override 0 Allow 1 Inhibit Main Usage for Commodity Name, Shop Name and Special Message 0 Receipt 1 Label

9

Tare Override 0 Allow 1 Inhibit Item Printing 0 Allow 1 Inhibit Default Data of Printing Shop Name Number for Label Enter value from range 0 to 32 Default Data of Printing Shop Name Number for Receipt Enter value from range 0 to 32 Setting of Scale Number Enter value from range 0 to 999 999 Type of Client / Server Interface 0 No Interface 3 Not Used 1 Ethernet (Coaxial Cable) 4 4-Lines (RS-485) 2 Ethernet (Twisted Pairs) Setting of Client / Server 0 Client 2 Backup Server 1 Server / Workstation

9

Baud Rate of SIO (RS-232C Port) 0 1 200 bps 1 2 400 bps 2 4 800 bps 3 9 600 bps

9

Data Length of SIO (RS-232C Port) 0 7 Bits Parity Bit of SIO (RS-232C Port) 0 None 1 Odd Stop Bit of SIO (RS-232C Port) 0 1 Bit

4 5 6

19 200 bps 38 400 bps 76 800 bps

1

8 Bits

2

Even

1

2 Bits

Related to SPEC40.

9 Effective when SPEC39 = 1.


9 Always set to 0 for SM200.

9 9 9 9 9 Related SPECs for Ethernet I/F are SPEC50, 135, 214.

9 Related SPECs for S/C setting are SPEC61, 150, 163, 165, 187, 194, 208, 229, 252, 253, 254, 255, 265, 276. Apply to both RS-232C and RS-485 ports setting for SM-300. Related SPECs are SPEC48, 52, 53, 54, 60, 134.

9 Apply to both RS-232C and RS-485 ports setting for SM-300.

9 Apply to both RS-232C and RS-485 ports setting for SM-300.

9

Baud Rate of Multi-drop SIO (RS-485 / 4-Lines Port) 0 1 200 bos 3 9 600 bps 1 2 400 bps 4 19 200 bps 2 4 800 bps 5 38 400 bps Data Length of Multi-drop SIO (RS-485 / 4-Lines Port) 0 7 Bits 1 8 Bits Parity Bit of Multi-drop SIO (RS-485 / 4-Lines Port) 0 None 2 Even 1 Odd Stop Bit of Multi-drop SIO (RS-485 / 4-Lines Port) 0 1 Bit 1 2 Bits


Apply to both RS-232C and RS-485 ports setting for SM-300.

8 Related SPECS are SPEC48, 56, 57, 58, 59, 134.

8 8

8

4 of 32

Specification List SM-100 V2.00 59 Multi-drop SIO (RS-485 / 4-Lines Port) Select Job 0 No Operation 2 Pick ‘N’ Pay #2 1 FIS 3000 #1 60

61 62 63 64 65

nd

2

SIO (RS-232C Port) Select Job 0 No Operation 1 FIS 30000 #1 2 FL-1

26 December, 2006 8 #1 Either SPEC59 or 60 can be selected at any one time. #2 For SF only.

8 3 4 5

Point ‘N’ Shop Barcode Scanning Video Control #2

Floating Clerk 0 Inhibit 1 Allow Receipt Free Format 0 Disable 1 Enable SM-90 and DI-10 RS-232C Communication 0 No 1 Yes Enable Password Mode 0 Allow 2 Allow Multi Password 1 Inhibit Report Printing in Daily and Term Transaction Clear 0 Inhibit 1 Allow


Apply for both RS-232C and RS-485 ports setting for SM-300. #1 Refer to SPEC59’s comments #1. #2 For SM-300 only

8 8 Exclude AA.

8 9

9

5 of 32

Specification List SM-100 V2.00 66 Pack Quantity Function Key Enable 0 Allow 1 Inhibit 67 Advertisement Function Key Enable 0 Allow 1 Inhibit 68 Fixed Total Price Discount Function Key Enable 0 Allow 1 Inhibit 69 Total Price Percentage Discount Function Key Enable 0 Allow 1 Inhibit 70 Fixed Unit Price Function Key Enable 0 Allow 1 Inhibit 71 Fixed Unit Price Percentage Function Key Enable 0 Allow 1 Inhibit 72 Pack Date Function Key Enable 0 Allow 1 Inhibit 73 Minus Pack Date Function Key Enable 0 Allow 1 Inhibit 74 Sell by Date Function Key Enable 0 Allow 1 Inhibit 75 Unit Symbol Function Key Enable 0 Allow 1 Inhibit 76 Quantity Set Function Key Enable 0 Allow 1 Inhibit 77 Price Change Function Key Enable 0 Allow 1 Inhibit 78 Refund Item Function Key Enable 0 Allow 1 Inhibit 79 Shop Name Function Key Enable 0 Allow 1 Inhibit 80 Logo Function Key Enable 0 Allow 1 Inhibit 81 Print Select Function Key Enable 0 Allow 1 Inhibit 82 Print of Place of Production on Label 0 Inhibit 1 Allow 83 Selection of Markdown 0 No Markdown 2 Total Price Markdown 1 Unit Price Markdown 3 Unit and Total Price Markdown 84 Sub-total Function Key Enable 0 Allow 1 Inhibit 85 Grand Total Function Key Enable 0 Allow 1 Inhibit 86 Label Sensor Gap Value Enter value range from 0 to 255 87 Label Type 0 Gap 1 No Gap 88 Sell by Date Title Print out 0 Inhibit 1 Allow 89 ASCII Code Entry in S Mode 0 Inhibit 1 Allow 90 91 92

93

94 95 96 97 nd

2

Sub-total Markdown 0 No Markdown 1 Printer Speed for Receipt 0 Slow 2 1 Normal Printer Speed for Label 0 Slow 2 1 Normal Printer Strode 0 Single 2 1 Double Print Second Receipt 0 No Print 3 1 Continuous Print 4 2 1 sec Delay Position of Currency Symbol (on Label) 0 Before Price 1 Receipt Printing with Dual Copy 0 Inhibit 1 Advertisement Message on All Label 0 Inhibit 1 Manual Print in Prepack Mode for Weigh Item

26 December, 2006 9 9 9 9 9 9 9 9 9

9 9 9 9 9 9

9 9 8 9 8 For AA only.

8 For AA only.

9 Markdown 9 High 9 High 8 Not Used 9 3 sec Delay User Select 9 After Price 8 Allow 9 Allow


9 6 of 32

Specification List SM-100 V2.00 0 Inhibit 1 Allow 98 Quantity and Unit Symbol Print Out for Non-weigh Item in Manual Mode 0 Allow 1 Inhibit 99 Unit Print Out for Non-weigh Item in Manual Mode 0 Inhibit 1 Allow 100 Discount in PLU Programming 0 Allow 1 Inhibit 101 Zero Suppress for Date and Time 0 Disable 1 Enable 102 Discount Presentation in Receipt 0 Discounted Unit Price and 1 Original Unit Price and Price Original Price 103 Unit Price Assignment Function Key for PLU 0 Enable 1 Disable 104 Discount Price Rounding Method 0 Rounding 2 Cut Up 1 Cut Down 105 Fixed Total Price Markdown Function Key Enable 0 Allow 1 Inhibit 106 Total Price Percentage Markdown Function Key Enable 0 Allow 1 Inhibit 107 Fixed Unit Price Markdown Function Key Enable 0 Allow 1 Inhibit 108 Fixed Unit Price Percentage Markdown Function Key Enable 0 Allow 1 Inhibit 109 Source of Sell by Date 0 Real Time Clock 1 Packed Date 110 Year Type 0 Standard 1 Japanese / Taiwan 111 Price Symbol on Receipt 0 No Print 2 Yen 1 Kanji Yen 112 Default Data of Printing Special Message Number for Receipt Enter value range from 0 to 16 113 Label Logo Printing Status 0 No Print 3 Logo 3 1 Logo 1 4 Logo 4 2 Logo 2 114 Receipt Logo Printing Status 0 No Print 4 Logo 3 1 Logo 1 5 Logo 4 2 Logo 2 6 Logo 1, 2, 3 and 4 3 Logo 1 and 2 115 Type of Entry for Used by Date and Sell by Date 0 By Day 1 By Hour 116 Barcode Printing in First Label for Dual Label Printout 0 Print 1 No Print 117 Zero Minutes Printing 0 No Print 1 Print 118 119

120 121 122 123 124 125 126 127 nd

2

Both Price before and after Discount 0 Price before and after Discount Unit Symbol Printout in Receipt 0 Depend on PLU Programming 1 Japanese PCS PLU Number Print 0 No Zero Suppress Thick Japanese Character Printout 0 Thick Character Prepare Mode after Power On 0 Manual Mode Printing Thank You Message on Receipt 0 Enable PLU Unit Price after Discount 0 Unit Price after Discount Position of Special Message on Receipt 0 Bottom Function Keys Protection for Self-service 0 No Protection 1 Full Protection Printing of Checksum for Item Barcode

26 December, 2006 9 8 8 9 8

9

9 9 9 9 9 8 For AA and TW only.

8 For AA only.

9 9

8 For NICHII only.

8 For NICHII only.

8 For NICHII only.

8 1

Price before Discount only

2

No Print

1

Zero Suppress

1

Thin Character

1

Prepack Mode

1

Disable

1

Unit Price Discount Amount

1

Top

2

Partial Protection

For NICHII only.

9 For AA only.

9 8 For AA only.


8 9 9 8


7 of 32

Specification List SM-100 V2.00 0 Disable 1 Enable 128 Setting of Host Number (For SM-15 Multi-drop) Enter value between 0 to 99 129 Type of Host to be Communicated 0 Standalone 2 POS ECR 1 TMR ECR 130 Selection of Print Item on Prepack Total Label 0 Based on Status on Item Label 1 Based on Status on Manual Total Label 131 Print PLU Setting Quantity in Manual Mode 0 No 1 Yes 132 133 134

135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 nd

2

Receipt Total Report 0 No 1 Yes Change All PLU Default Format when Default SPEC Change 0 Yes 1 No Host Communication 0 No Operation 1 Enable Host Communication 0 RS-232C 1 RS-485 Port Number Enter value from range 1 to 254 One or Two Touch for Self-service Operation 0 One Touch 1 Two Touches Centering of Ingredient Data 0 Yes 1 No Permanent Price or Discount Price Change via Function Key 0 No Update to PLU 1 Update to PLU Number of Digits for Teraoka Code 0 2 Digits 1 3 Digits AA Message Size 0 24 x 24 1 16 x 16 Year Format 0 YY 1 YYYY Selection of Day Display for Sell by Date 0 Disable 1 Enable Peel Sensor Trigger Voltage 0 High 1 Low Display Prepack Quantity Balance 0 Enable 1 Disable Print Select Function Across the Board 0 Disable 1 Enable Label Format 1, 2 Function Key Enable 0 Inhibit 1 Allow Prepack Non-add Function Key Enable 0 Inhibit 1 Allow FIS3000 Code 0 SM-80/90 FIS3D 1 SM-25 FIS3D Main Group Function Key Enable 0 Inhibit 1 Allow Preset Key Assignment for Client 0 Local Assign 1 Central Assign Change Sell by Date or Used by Date when Packed Date Changed 0 No 1 Yes Sell by Date or Sell by Time for Individual PLU 0 Disable 1 Enable User Programmable Right Side Data for Item Barcode 0 With Identification Digit 1 Without Identification Digit Keysheet Letter Size 0 Small Letter 1 Capital Letter Test Print on Receipt 0 No Print 1 Print Image Copy from Free Format 0 Disable 1 Enable Training Mode 0 Disable 1 Enable FSD Price and Image 0 Disable 1 Enable ½ and ¼ Key Function 0 Disable 1 Enable Twisted Pair Cable for Ethernet


26 December, 2006 8 For IR only.

8 For IR only. Use with SPEC128.

9 9 Effective when SPEC98 = 0.

8 For DM only. 9 8

9 9 9 9 8 8 For AA only.

9 9 8 8 9 9 Exclude AA. Exclude AA.

8

Exclude AA.

9 8 For FL & AS only.

8 For SD only.

9 8 Exclude DEC.

8 For U1 only.

8 8 8 of 32

Specification List SM-100 V2.00 0 Shield 1 Unshielded 161 Discount Label Format 0 Enable 1 Disable 162 Item Code Function Key Enable 0 Enable 1 Disable 163 Transaction Data Store in Client Memory 0 Disable 1 Enable 164 Maximum Label Length 0 120 mm 1 240 mm 165 Update Report for Client / Server System 0 Yes 1 No 166 Average Price and Weight Label Function 0 Disable 1 Enable 167 Label Date Title Print 0 No Print 1 Print 168 GB Code 0 GB Code 1 Shift GB Code 169 Print PLU Setting Unit in Manual Mode 0 No 1 Yes 170 User Specification (REZERO + 141) Accessible from Z Mode Only 0 No 1 Yes 171 Euro Mode 0 Disable 1 Enable 172 Dual Declarations 0 No 1 Yes 173 Mask 7-segment Display in X, S and Z Mode 0 No 1 Yes 174 175 176 177 178 179 180 181 182 183

184

9 9 Exclude AA.

8 For CN and MS only.

8 9 9 For U1 only.

8 For double display types only.

8 1

Print

Print $ and Weight Unit on Label 0 No Print

1

Print

Clear Total Data by Server 0 Both Server and Client

1

Server

For bench type only.

8 For UK only.

9 8 9 9

9 9 8

Effective when SPEC158 = 1.

9

188

Tare Decimal Point Left Shift for SM-25 FIS3D 0 No 1 Yes

189

PLU Auto Delete 0 No Delete 1 15 Days

2 3

30 Days 90 Days

Swap Weight and Unit Price on Receipt 0 No

1

Yes

nd

8

Duplicate Unit and Total Price on Label 0 No Print

186

2

For SD only.

8

Weigh PLU Can Use for Non-weigh PLU and Vice Versa Function Key Enable 0 Disable 1 Enable

190

8

Fixed Clerk Assign to Preset Key 8, 16, 24 and 32 0 Clerk Keys 1 Function Keys 30 lb to 15 kg Conversion 0 Disable 1 Enable Discount Time on Daily Basis 0 No 1 Yes Weight Check Function 0 No 1 Yes Unit Price Override per PLU 0 No 1 Yes Black Bar Sensing Label 0 Normal 1 Black Bar Sensing Scroll Message Group 0 Disable 1 Enable Continuos Label 0 Disable 1 Enable Character Size for Barcode Data 0 Large 1 Small PLU Clear after 10 seconds Time-out 0 No 1 Yes

185

187

26 December, 2006 Not in used.

8

8


9 of 32

Specification List 191 192

193 194

195 196 197

198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217

218 nd

2

SM-100 V2.00

26 December, 2006 9

Default Item Code Equals to PLU Number 0 No 1

Yes

Nutrition Template 0 Standard 1 Simplified 2 Simplified Condensed

Standard Condensed Tabulated Tabulated Extra Condensed

8 3 4 5

For U1 and CA only.

Nutrition Adjustment Feed Enter value from range 0 to 255

9

Server IP Address Enter a value between 1 to 254

9

Weight Print for Non-weigh Item 0 No 1 Yes Scale File 0 Disable 1 Enable Print Format of Month 0 Number 2 3 Alphabetic 1 2 Alphabetic FSD Saving Calculation 0 Net Value 1 Cent Off FIS3000 Time Out 0 2 sec 2 32 sec 1 8 sec PLU Call Up Range 0 Disable 1 Enable Sell by Date for Manual Mode 0 Programmed Sell by Date 1 Zero Sell by Date Printing of Item Label when Barcode Data Overflow 0 Print 1 No Print Preset Keys Pages 0 1 Page 2 3 Pages by Shift Key 1 3 Pages by Toggle Reference PLU Function Key Enable 0 Inhibit 1 Allow Print Function Key Enable 0 Inhibit 1 Allow Print Barcode when Right Side Data Overflow 0 No print 1 Print Barcode Digits Weight Decimal Point Position for Barcode and Label Printing 0 Same as SPEC607 1 0.000

9

Network Time Out 0 3 sec 1 x2 FSD Calculation 0 Unit Price

9

For U1 and CA only.

For Client scale only.

2 3

x4 x10

1

Price Percentage Off

9

8 For U1 only.

8

9 9

8


8

PLU Repeat Function Key Enable 0 Inhibit 1 Allow Pick ‘N’ Pay Protocol 0 Old 1 New Department Number for Pick ‘N’ Pay Enter a value between 1 to 99 Flag Code Function Key Enable 0 Inhibit 1 Allow DHCP Function 0 Disable 1 Enable Centering of Special Message 0 Yes 1 No JIS Code Table 0 New 1 Old Default Label Format 2 for Item Printing 0 Not Used 5 F5 1 F1 6 F6 2 F2 7 F7 3 F3 8 F8 4 F4 Zero Unit Price for Unit Price Change Function Key


For U1 only.

8 For SF only.

8 For SF only.

9 8 For AA only.

10 of 32

Specification List SM-100 V2.00 0 Inhibit 1 Allow 219 Numeric Key Entry Reset 0 3 sec 2 Disable 1 5 sec 220 Item Barcode Right Side Data Dependent on Unit 0 Disable 1 Enable 221 222 223 224 225 226 227 228 229 230 231 232 233

nd

2

26 December, 2006 9 For AA only.

8 Effective when SPEC1 = 0 or 2.

Receipt with Tax Information Function Key Enable 0 Inhibit 1 Allow Open Cash Drawer without Sales Function Key Enable 0 Inhibit 1 Allow Negative Unit Price Function 0 Disable 1 Enable FIS3000 Wire Type 0 4 wires 1 2 wires Prepack Grand Total for Individual PLU 0 Yes 1 No Reverse Calculation of ITF Check Digit 0 No 1 Yes Unit Price Override Password Function 0 Inhibit 1 Allow

8

Individual PLU Total Transaction 0 No Preset Key Group 0 Disable

9 1

Yes

1

Enable

Auto Print after PLU Call 0 No 1 Yes Zero Unit Price for PLU and Unit Price Override 0 Inhibit 1 Allow Feed for Continuous Label 0 No 1 Yes Time Format 0 24 Hours 1 12 Hours (AM/PM)


9 8 8

9



9 9 9 9

11 of 32

Specification List

SPEC NO. 234

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Sub-total and Grand Total Barcode 0 Based on Item Barcode

SM-100 9

1

Based on Total Barcode

235

Mask Barcode Last Human Readable Check Digit 0 No 1 Yes

9

236

Character Generator for Korea 0 Old

8 1

New

Half-key Function 0 Inhibit

1

Allow

2

SM-25 Dots

237 238

239 240 241 242 243 244

FIS3000 Free Format Unit 0 mm 1 Dots

For KE only.

9

9

Cheque and Credit Payment Function Key 0 Inhibit 1

Allow

Voucher Payment Function Key 0 Inhibit

1

Allow

PLU Code for IR POS and TMR 0 6 Digits

1

7 Digits

Discount without Limit Function Key 0 Inhibit

1

Allow

Concatenate Commodity Name Display 0 No

1

Yes

Enable PLU Price Change Flag 0 No

1

Yes

8

245

Print Sell by Date or Used by Date when Date Equals Packed Date 0 Yes 1 No

9

246

Print First and Check Digits Outside Barcode 0 No 1

9 Yes

Print Packed date 0 Manual and Prepack Mode 1 Manual

2 3

Prepack Mode No Print

Print Sell by Date 0 Manual and Prepack Mode 1 Manual Mode

2 3


Print Used by Date 0 Manual and Prepack Mode 1 Manual Mode

2 3


Centering Shop Name on Label 0 No

1

Yes

Shop Name on Receipt 0 Top

1

Bottom

Auto Reconnect when Server Down 0 Disable 1 Every 2 min

2 3

Every 3 min Every 15 min

247

248

249

250 251 252

nd

2

9

9

9

9

9


12 of 32

Specification List

SPEC NO. 253

254 255

256 257 258 259 260 261 262

263 264 265 266

267 268

269

270

271

nd

2

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Client Auto PLU Update 0 Update / Delete Existing PLU 1 Update / Delete All Sever PLU 2 Update Existing PLU

3 4

Update All Server PLU Disable

Auto Update of Client Off-line Report 0 Disable

1

Enable

Retry Ethernet Communication 0 2 times

1

5 times

SM-100

Display Price with Tax after Clerk Key Press 0 Yes 1

No

For AA only.

Change Place Name to PLU via Function Key 0 No 1

Yes

For AA only.

Beef Labeling 0 No

1

Yes

Auto Print Sub-total Label in Prepack 0 No

1

Yes

Beef Labeling : Print Country 0 Code

1

Name

External Rewinder 0 Disable

1

Enable

Selection of Receipt / Label 0 Label

1

Receipt

FSD Net Value Minimum 0 Off

1

On

Print Ingredient Data on Next Label 0 Disable

1

Enable

Client Using Local Free Format Label 0 No

1

Yes

2

Exact Weight

1

Second Language

FSD Weight 0 Back Computed (Single Range) 1 Back Computed (Dual Range) CPDL Language Selection 0 First Language

8

9

9

9

8

8

8 For U1 only.

8

Exclude AA, HK, CN, TW and KE.

9 4 5 6 7

Individual Report Print and Clear in Z Mode 0 Disable 2 1 Manual Clear Store Total Report Clear 0 Store Total Report Only

For U1 only.

9

Display Special Scale Message for Discounted Item 0 No 1 Yes Auto Clerk Accumulation (for scanner) 0 No 1 V1 2 V2 3 V3

Always set to 1 for SM200.

1

V4 V5 V6 V7

For IR only.

Auto Clear

All Report


Effective when SPEC270 = 1 or 2.

13 of 32

Specification List

SPEC NO. 272 273 274 275

276 277

278

279 280 281 282 283 284 285 286 287 288 289 290

nd

2

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION 9

Beef Reference Number 0 Code

1

Date

Item Code Follow PLU Number 0 Yes

1

No

Bench Key Pad 0 New

1

Old

Taiwan Receipt Printer 0 Disable

1

Enable

Floating Server 0 Disable

1

Enable

Real Time Buffer 0 No 1 2 Days 2 3 Days 3 4 Days

4 5 6 7

5 Days 6 Days 7 Days Unlimited

3 4

By Date and Reference No. By Date and PLU No.

U1 Self-service 0 Disable

1

Enable

Real Time Customer Number 0 No

1

Yes

Real Time Buffer Receipt 0 Detail

1

Total Only

Barcode Function 0 Without CR

1

With CR

Barcode Look-up-table (LUT) Contents 0 Non-weigh Item Only

1

All Items

Open Cash Drawer on Credit Payment 0 Allow

1

Inhibit

Australia ECR Function 0 No

1

Yes

Enforce Amount Tendered 0 No

1

Yes

Enforce Change Key 0 No

1

Yes

Planned Price Printed in Report 0 Enable

1

Disable

Repeat PLU Call 0 No

1

Yes

Payment Key 0 Disable

1

Enable

Traceability Report 0 Disable 1 By Reference No. 2 By PLU No.

SM-100

9

8

8 For TW only. Apply for POS1 FLEX PP2000 srs. 2 only.

9

9

8 For U1 only.

8 8

8

9

8 For AR only.

9

9

8


For DEC countries only.

14 of 32

Specification List

SM-100 V2.00

SPEC NO. 291 292 293

294 295 296 297 298 299

300

301


1

No Change

SM-200 Power Save 0 Back Light Off

1

Power Off

2 3

10 Min 2 Min

4 5 6

1 Min 2 Min 5 Min

SM-200 Battery Option 0 Yes

1

No

SM-300 Scrolling Message Update Rate 0 6 Lines

1

12 Lines

Ingredient File-Size Expansion 0 Maximum 99 records

1

Maximum 255 records

Print PLU Ingredient in Receipt 0 No

1

Yes

Traceability Update Function 0 No

1

Yes

2

80 Preset Keys

SM-500 Self-Service 0 No

1

Yes

Print Receipt after Accumulation 0 Yes

1

No

1

Enable

SM-200 Power Save Timeout 0 3 Min 1 5 Min PLU Scrolling Message Display Interval 0 Disable 1 3S 2 10S 3 30S

Keyboard Selection 0 Normal Keyboard # 1 100 Preset Keys

Fixed Port Number for Ethernet Enter value from 1 to 254

303

DHCP IP Address Lease Time 0 Disable

8

8

9

8

8

8

1

Enable

Unit Print on Receipt 0 Pcs

1

Items

Code Page 0 DOS

1

ANSI

SM-500 2 Receipt Printer 0 Disable

1

Enable

Praxis Function 0 Disable

1

Enable

nd

96 Preset Keyboard. Identical to SPEC688.

9

Character Spreading Speed Up 0 Disable

2

# 32/56 Preset Keys. Identical to SPEC672.

8

305

309

For SF only.

8

Server Port Number Enter value from 1 to 254

308

For U1 only.

8

304

307

SM-100 9

Gap Value In-feed Operation 0 Re-adjustable

302

306

26 December, 2006

8 (S3, S4, M3 & M4) For U1 only.

8

nd

For IR only.

8

8


For DEC countries only.

15 of 32

Specification List

SPEC NO. 310

311 312 313 314

315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330

nd

2

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Multi Barcode Type 0 EAN128 1 RSS

9 2

CODE128

Operator Logging Function 0 Disable

1

Enable

Price Change Password 0 Disable

1

Enable

Price Change Log File 0 Disable

1

Enable

2

Enable (Clerk Report)

1

No

Training Mode 0 Disable 1 Enable Print PLU Traceability in Receipt 0 Yes

SM-100

For AI 01 only.

9 For CA only.

9 For CA only.

8 For DEC only.

8

Include Prepack Total in Manual Total Report 0 Yes 1

No

Wireless Communication 0 No

Yes

9

9 1

Wireless FTP Port Number Enter value range from 1 to 9999

Not in used.

9

Delete Traceability Record 0 Yes

1

No

PLU Link to Text Field 0 Disable

1

Enable

Julian Date for Packed and Sell Date 0 No

1

Yes

Price Printing Size (Large Font) 0 No

1

Yes

Auto PLU Broadcasting 0 Disable

1

Enable

8

Decimal Point For Unit Price And Total Price 0 Disable 1

Enable

Peel Sensor Value 0 Re-adjust

1

No Change

ON/Off Key 0 Enable

1

Disable

SM300 Print Control 0

1

Enable

TU 9 Digit Total Price 0 Disable

1

Enable

PLU Tare Call up 0 Allow

1

Inhibit

Individual Scale Store Total Report 0 No

1

Yes

For U1 only.

8

9

8

8 For Tu only.

8 8


16 of 32

Specification List

SPEC NO. 331 332

SM-100 V2.00


1

Enable

ITEM Text (5-16) Print on Total Label 0 Disable

1

Enable

9

Image at Top Receipt Enter range from 0 to 99

334

Image at Bottom Receipt Enter range from 0 to 99

335

Traceability Eat By Date 0 Disable

1

Enable

Traceability Max Weight 0 Disable

1

Enable

5 6 7 8

F5 F6 F7 F8

1

EAN128

337

338

Traceability Default Label Format 0 Not Used 1 F1 2 F2 3 F3 4 F4 Traceability Barcode 0 EAN13

339

Flag Data (EAN13) Enter range from 0 to 99

340

Enforce Scan 0 No

1

Yes

TVP2000 (SM300) 0 Not Send T10

1

Send T10 Label Format

LCD 1 Line Scroll 0 Disable

1

Enable

Clear Key in Prepack 0 Enable

1

Disable

Print Pack Date 0 Yes

1

No

Update Spec For Server/Client System 0 Enable

1

Disable

341 342 343 344 345 346

347 348 349

nd

2

SM-100 9

Default ITF for Barcode 0 Disable

333

336

26 December, 2006

Update Label Turn-over In Receipt Buffer 0 No 2 1 Only In Registration Mode 3

Only In Prepack Mode Both

Internet Broadcast 0 No

1

Yes

Taiwan POP Label 0 Disable

1

Enable

Direct Access To Clerk Mode 0 Disable

1

Enable


For TW only

20 of 32

Specification List

SPEC NO. 350 351

nd

2

SM-100 V2.00

SPECIFICATION DESCRIPTION Additional Rounding In Receipt 0 Print

1

No Print

Gratuitous ARP 0 Disable

1

Enable


26 December, 2006

SM-100

21 of 32

Specification List

SPEC NO. 400

401

SM-100 V2.00

26 December, 2006


SM-100 9

Auto Power-Off Function 0 Inhibit 1 3 Minutes 2 10 Minutes

3 4 5

30 Minutes 1 Hour 3 Hours

RTS/CTS Handshaking of RS-232C 0 On

1

Off

9

402

Reset Receipt consecutive Number after Reset Report 0 No 1 Yes

9

403

Vender Number Display in Registration Mode 0 Allow 1 Inhibit

9

404

Number of Vender Keys 0 4 Vender Keys 1 5 Vender Keys

9 2 3

6 Vender Keys 7 Vender Keys

405

Priority of Shop Name and Special Message on Receipt 0 Shop Name Priority 1 Special Message Priority

9

406

Centering of shop name on Receipt 0 Allow

9

407

1

Inhibit

Centering of special Message on Receipt 0 Allow 1

Inhibit

9

408

One or Two Touch for Receipt Printing in AMT/TEND 0 One Touch 1 Two Touch

9

409

PLU Number Printing on Receipt 0 Inhibit

9 1

Allow

Sale Item Entry Method 0 Total

1

Item

410 411 412 413 414

415 416 417

nd

2

9

Default Vender Transaction by Print Key 0 Allow 1

Inhibit

Print Checking Line 0 Print

1

No Print

Source of Used by Date 0 Current Date

1

Packed Date

9

9 9

In-Store Barcode for Barcode Scanner Enter 0 F1F2 CCCCCC TTTT CD 5 1 F1F2 CCCCC TTTTT CD 6 2 F1F2 CCCC TTTTTT CD 7 3 F1F2 CCC TTTTTTT CD 8 4 F1F2 CC TTTTTTTT CD

9 F1F2 CCCCC XCD TTTT CD F1F2 CCCC XCD TTTTT CD F1F2 CCCCC PCD TTTT CD F1F2 CCCCC 0 TTTT CD

#1: F1F2 - 20~29 #2: CC ~ CCCCCC Item code. #3: TTTT ~ TTTTTTTT Total Price

9

Non-PLU Item Enter by Barcode Scanner 0 Allow 1

Inhibit

Barcode Scanner 0 Allow

1

Inhibit

Centering of Commodity Name on Label 0 Allow 1

Inhibit

9 9


22 of 32

Specification List

SPEC NO. 418 419 420 421

SM-100 V2.00

26 December, 2006


Weight Data Synchronization Function 0 Allow

1

Inhibit

Open Cash Drawer when Issue Label 0 Allow

1

Inhibit

Print Grand Total on Sales Report 0 Allow

1

Inhibit

2

Receipt Data & Label Data

Constitution of Report 0 Receipt Data 1 Label Data

SM-100

9

9

9

422

Currency Symbol for Total Amount on Receipt 0 No Print 2 Suffixation 1 Prefixion

9

423

Print Total Number of Pieces on Receipt 0 Allow 1

9

424 425

426

Inhibit nd

Total Barcode on Receipt for Total Price in 2 0 Allow 1

Currency Inhibit

Second Currency as Reference Price 0 No 1 For Receipt

2 3

For Label For Receipt and Label

Print Tare Weight when Unit Price is 0 0 Allow

1

Inhibit

9 For FR only.

9

9

427

Eliminate Cash Line on Receipt when No change Operation 0 Allow 1 Inhibit

9

428

PRINT Tax List on Receipt 0 Allow

9 1

Inhibit

Non-Weigh PLU Unit Price Display 0 Total Price Column

1

Unit Price Column

429

Effective when SPEC603 =1

9

430

Items on PLU / Main Group / Dept / Tax Report 0 Registered Items 1 All Items

9

431

Eliminate Vender Data on Sales Report 0 Allow

9

432

1

Font Size for Commodity Name on Receipt 0 Standard Font Size 2 1 Larger Font Size

Inhibit 9 Largest Font Size

433

Condition of Additional Price Rounding for Total Price 0 Cash Payment Only 1 Always

9

434

Item Barcode Type 0 EAN Type 1 ITF Type

9

435

Total Barcode Type 0 EAN Type

2

User Programmable

1

ITF Type

9

436

In-Store Barcode Type for Barcode Scanner Enter 0 EAN Type 1 ITF Type

9

437

Print Rounding on Receipt 0 Allow

9

nd

2

1

Inhibit


23 of 32

Specification List

SPEC NO. 438 439

440

SM-100 V2.00

26 December, 2006


Print Sub-Total on Receipt 0 Allow

1

Inhibit

Pulse width for Opening Cash Drawer 0 20ms (Default Value) 1 50ms 2 100ms

3 4 5

200ms 300ms 400ms

2

Power On & Password R Key

R Mode Password Function 0 Inhibit 1 Password R Key

SM-100

9

9

441

Set / Reset Auto PLU Call Function Key Enable 0 Allow 1 Inhibit

9

442

Change Main Group Code for Auto Plu Call Function Key Enable 0 Allow 1 Inhibit

9

443

Prefix Fixed Code to PLU Code for Auto PLU Calling 0 No 2 2 Digits 1 1 Digit 3 3 Digits

9

Decimal Point Position for Second Currency 0 None 2 1 0.0 3

9

444

0.00 0.000

445

Unit Price Change for PLU after Label Printing 0 Inhibit 1 Allow

446

Print Tare Weight on Receipt 0 Allow

447 448 449 450 451

452 453

nd

2

Effective when Spec39 = 1, Spec40 = 0

1

Inhibit

Place Change for PLU after Label Printing 0 Inhibit 1

Allow

9

9

Sell Date Change for PLU after Label Printing 0 Inhibit 1 Allow

For KE only.

9 For KE only.

Trace Auto Clear 0 Inhibit

1

Allow

For KE only.

Trace per PLU 0 Inhibit

1

Allow

For KE only.

Trace Auto Update 0 Inhibit

1

Allow

For KE only. Effective when Spec450 = 1.

Trace Confirm 0 Inhibit

1

Allow

For KE only.

Trace C/D Check 0 Inhibit

1

Allow

For KE only.


24 of 32

Specification List SPEC NO. 454 455

456 457 458 459 460

461 462

463

nd

2

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Forced Tare when Tare Value in PLU is 9999 0 Inhibit 1 Printing of Servings Fact 0 SS Top & SC Bottom 1 SS Bottom & SC Top Special ‘FOR’ operation 0 Inhibit

SM-100 9

Allow

For CA only.

9 2 3

SS Print Only SC Print only

1

Allow

CN Weight Trace function 0 Inhibit

1

Allow

CN Weight Quota function 0 Inhibit

1

Allow

Symbol Format for Date Print 0 Dash

1

Period

CN Weight Trace Password 0 Inhibit

1

Allow

For CA only.

9 For U1 only.

9 For CN only.

9 For CN only.

9

9 For CN only.

Unit and Currency Symbol for each line in Receipt 0 Inhibit 1 Allow

9

1000 Separator for total line print on receipt 0 Inhibit 1

9 Allow

Print SHAMSI date 0 Inhibit

Allow

For U1 only.

For IN only.

9 1


For IN only.

25 of 32

Specification List

SM-100 V2.00

26 December, 2006

[REZERO] + [1][4][2] WEIGHT AND MEASUREMENT SPECIFICATION (Span Switch must be ENABLE when accessing this mode.) SPEC NO.


SM-100

600

Price Base for Price Calculation for Weighed Items 0 100 g Base 2 1 lb Base 1 1 kg Base

9

601

Auto Zero Function 0 Enable

9 1

Disable

Display Type 0 Single Display

1

Three Display

Tax 0 No Tax

1

Tax

Minus Weight Masking 0 Minus Gross > 9e

1

Minus Gross Weight Mask

Manual Scale Start 0 Auto Start

1

Manual Start

Zero Lamp Lighting Position 0 Gross Zero +/- ¼d

1

Net Zero +/- ¼d

Decimal Point Position for Weight 0 None 1 0.0

2 3

0.00 0.000

602 603 604 605 606 607

8

9 9

8 8

9

608

Zero Point Setting Range when A/C Display Switch On 0 +/- 10% of Capacity 2 +/- 3% of Capacity 1 +/- 5% of Capacity 3 +/- 2% of Capacity

9

609

Decimal Point for Unit Price and Total Price 0 None 2 1 0.0 3

9 0.00 0.000

Unit Price Decimal Right Shift 0 Inhibit

1

Allow

Unit Price Decimal Left Shift 0 Inhibit

1

Allow

2

500 g / 1 kg

610 611 612

Switching of Price Base 0 Inhibit 1 100 g / 1 kg

8 8

9

613

Exit from Accumulation Mode after within Specified Interval 0 Inhibit 2 5 Sec 1 15 Sec 3 10 Sec

9

614

Zero Setting Range when Weight Reset Switch is On or Zero Tracking 0 +/- 10% of Capacity 2 +/- 2% of Capacity

8

(Power on Start Point +/- 6000 IR)

1

+/- 5% of Capacity


3


615

nd

2

Minimum Display 0 1 1 2

+/- 0.6% of Capacity (Power on Start Point +/- 360 IR)

9 2 3

5 10


26 of 32

Specification List

SPEC NO. 616 617 618 619

620

621

622 623 624 625 626 627

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Selection of Resolution 0 1/3000 1 1/6000 New A/D 0 No Weight Single Interval or Multi-Interval 0 Single Interval

SM-100 9

2

1/7500

1

Yes

1

Multi-Interval

8 9

PLU Weight Item Commodity Name Display 0 Full Display 2 1 Half Display

8 No Display

For EB and EP type.

9

Tare Accumulation 0 Allow

1

Inhibit

Tare Subtraction 0 Allow

1

Inhibit

Manual Clear of Tare 0 Allow

1

Inhibit

Weight Reset Operation during Tare 0 Allow

1

Inhibit

Zero Tracking during Tare 0 Allow

1

Inhibit

Accumulation when Tare 0 Allow

1

Inhibit

Digit Tare 0 Allow

1

Inhibit

Decimal Point Figure 0 Period

1

Comma



9

9

9 9

9

9

628

Price Rounding Method for Decimal Digits on Weighed Item 0 Rounding 2 Cut Up 1 Truncating

9

629

Additional Price Rounding Method for Item Price st 0 No Addition Rounding 4 Rounding for 1 Digit st 1 ¼ Rounding (25 step) 5 Truncate 1 Digit st 2 Special Rounding (5 step) 6 Cut Up 1 Digit 3 5 Floor Rounding (0~4: 0, 5~9: 5)

9

630

Selection of Auto Clear of Unit Price 0 Inhibit

9 1

Allow

Selection of Maximum Capacity 0 Capacity +1d

1

Capacity +9d

Selection of Tare Value Exchange 0 Allow

1

Inhibit

Auto Clear of Tare 0 Inhibit

1

Allow

631 632

633

nd

2

8

8 Related to SPEC620 and 621.

9


27 of 32

Specification List

SPEC NO. 634

635 636 637

638

SM-100 V2.00

26 December, 2006

SPECIFICATION DESCRIPTION Auto Tare Clear when Rezero 0 Inhibit

SM-100 9

1

Trigger Point of Tare / Unit Price Auto Clear 0 Over Net 5d and Gross 21d and 1 Weight Stability Auto Zero Reset 0 Inhibit 1

Allow


9 >= Net 1d and Price > 0 and Weight Stability


8 Allow 8

Negative Weight Tare Clear 0 Allow

1

Inhibit

Tare Range 0 < 50% of Capacity 1 < 5% of Capacity

2 3

Maximum 200 g Not Used


8

639

Exit From Accumulation Mode when Weight Change 0 Inhibit 1 Allow

9

640

Price Accumulation with Weight Change More than +/- 10d 0 Inhibit 1 Allow

9

641

Accumulation Available Only after Scale Shows Weight is Equal Zero 0 Inhibit 1 Allow

9

Tare Display for One Touch Tare 0 Allow

8 1

Inhibit

Weight Range for Non-weigh Item 0 Only Net 0d

1

Always

Weight Stability Condition 0 Loose 1 Normal

2 3

Tight Stringent

2

Over Net 19d and Weight Stability

3


2


3


PLU Tare 0 Allow

1

Inhibit

Item Print when Tare 0 Allow

1

Inhibit

Tax Rounding Method 0 Rounding

1

Truncation

642 643 644

645

646

647 648 649 650 651

nd

2

Weight Range for R Mode Printing 0 Over Net 5d and Over Gross 21d and Weight Stability 1 Over Net 1d and Weight Stability Weight Range for Prepack 0 Over Net 5d and Over Gross 21d and Weight Stability 1 Over Net 1d and Weight Stability


9 9

9

9

9

9 8

9

Checking Span Switch for Internal Count 0 No 1

Yes

Certain Function Key Order 0 Function Key Precede Numeric Key

Numeric Key Precede Function Key

8 1


28 of 32

Specification List

SPEC NO. 652 653 654 655

656

657 658 659 660

SM-100 V2.00

26 December, 2006


Angle Rotation for Certain Items Printing 0 Anti-clockwise 1

Clockwise

Total Price Discount 0 Allow

1

Inhibit

1

Allow

1

Inhibit

5 6 7 8

Cassette-B Cassette-P B-CS P-CS

Password Setting 0 Allow

1

Inhibit

Extra Label for Prepack Printing 0 Inhibit

1

Allow

Item Price Printing 0 Item Price before Tax

1

Item Price after Tax

Barcode Check Line 0 Print

1

No Print

Packed Date Function in Manual Mode 0 Inhibit Prepack Mode 0 Allow Scale Type 0 Pole 1 Bench 2 Elevated 3 Hanging 4 Self-service

SM-100

9

9 9 Always set to 1 for SM200.


9 By-pass Span Switch.

8

8

9

661

Additional Price Rounding Method for Total Price st 0 No Addition Rounding 4 Rounding for 1 Digit st 1 ¼ Rounding (25 step) 5 Truncate 1 Digit st 2 Special Rounding (5 step) 6 Cut Up 1 Digit 3 5 Floor Rounding (0~4: 0, 5~9: 5)

9

662

Unit Price Recalculation 0 Inhibit

8 1

Allow

Nordic Country 0 Inhibit

1

Allow

Self-service Type 0 Inhibit

1

Allow

663 664

8

9 Related SPECs are 126, 136, 672.

665

Swap of Unit Price and Total Price Display in R Mode 0 Inhibit 1 Allow

8

666

Multiplication Operation in Prepack Mode 0 Inhibit 1

9

667

nd

2

Dot Matrix Display Scanning Rate 0 Normal 1 Slow R Mode Display Configuration 0 Standard 1 Without Tare Weight

Allow 8

2 3

High Very High

2 3

Not Used Not Used

8


29 of 32

Specification List

SPEC NO. 668

669 670 671 672

673 674 675

676

677 678

679

SM-100 V2.00

26 December, 2006


Commodity Name Display Interval 0 0.5 Sec 1 1.0 Sec

2 3

1.5 Sec # 2.0 Sec #

16 x 16 Commodity Name Display 0 1.0 Sec 1 1.5 Sec

2 3

2.0 Sec 2.5 Sec

Mask Weight Display 0 No

1

Yes

Scroll Message Display 0 Full Length

1

Half Length

1

Version 0.16 and Above

2

80 Preset Keys

Hanging Scale 0 No

1

Yes

Masking Last Digit Over 15 lb 0 No

1

Yes

Auto Zero Adjustment Range 0 +/- 5d

1

2% of Capacity

Display CPU Selection 0 Below Version 0.16 Keyboard Selection 0 Normal Keyboard # 1 100 Preset Keys

SM-100

For EB and EP type. # Effective when SPEC619 = 0.

8 For CN, HK, MS and TW.

8

8 For EB and EP type.

8 8 # 32/56 Preset Keys.

8 8


Right Side Barcode Data Shifting for Item and Total Barcode 0 No 3 Left Shift Twice 1 Right Shift Once 4 Left Shift 3 Times 2 Right Shift Twice 5 Left Shift Once

9

Manual Weight Function Key 0 Disable

9 1

(left shift valid for quantity only)

Enable 8

Printing of Item Label after Weight Change 0 Inhibit 1

Allow

Catty (Kati) and Tael 0 Disable

Enable

For SS type. Effective when SPEC640 and 641 = 1.

8 1

680

Tare Clear when Exit From Z mode, Password Mode, Changing of Customer, and Weight and Measure Specification 0 No 1 Yes

681

Euro Second Price Rounding Method 0 Rounding 1 Truncating

Available in special version only.

8

9 2

Cut Up

682

Additional Euro Second Price Rounding Method st 0 No Addition Rounding 4 Rounding for 1 Digit st 1 ¼ Rounding (25 step) 5 Truncate 1 Digit st 2 Special Rounding (5 step) 6 Cut Up 1 Digit 3 5 Floor Rounding (0~4: 0, 5~9: 5)

9

683

Foreign Code for Standard Countries 0 Inhibit 1 GB Code

8

nd

2

2

Korean Code


Not effective for AA, CN, HK, KE, MS and TW.

30 of 32

Specification List

SPEC NO. 684

685 686 687 688 689

690 691

SM-100 V2.00

SPECIFICATION DESCRIPTION Calibration at 1/5 of the Capacity 0 Disable

Enable

Auto Selection Between Two Label Format 0 Inhibit 1

Allow

Rounding for Weight 0 No

1

Yes

Proportional Tare 0 No

1

Yes

1

Yes

2 3

4 Sec Stop 6 Sec Stop

Test Program 0 Disable

1

Enable

One Touch Tare 0 Enable

1

Disable

SM-500 Self-service 0 No Consecutive Display 0 1 Sec Stop 1 2 Sec Stop

9 9

8 8

8

8 8

693

Flexi Self-Service Key Grouping 0 No

1

Yes

Weight Hold Function 0 Disable

1

Enable

Clerk Password Setting 0 Disable

1

Enable

Quantity Symbol Re-calculation 0 No

1

Yes

696

9 8

9

RESERVED

698

DEC PLU Tare 0 No

1

Yes

Right side Data of Barcode Shift 0 Normal 1 Quantity

2 3

Weight Price

nd

2

For CA only.

8

697

699

Not effective when SPEC615 = 0.

8

RESERVED

695

SM-100 8

1

692

694

26 December, 2006

8 8

9


31 of 32

Specification List

SPEC NO. 700 701 702

SM-100 V2.00

26 December, 2006


SM-100 9

Version Display When Power On 0 Allow

1

Inhibit

Re-Zero Function 0 Allow

1

Inhibit

Total Price Display 0 Allow

1

Inhibit

9

9

703

Tax Rounding Method for Tax Value Excluded in Price 0 Rounding 2 Cut Up 1 Truncation

9

704

Tax Rounding Method for Tax Value Included in Price 0 Rounding 2 Cut Up 1 Truncation

9

705

Commodity Name Display When Call PLU in Label Mode 0 Allow 1 Inhibit

9

706

Commodity Name Display When Call PLU in Receipt Mode 0 Allow 1 Inhibit

9

707

Price Fix 0 Inhibit 1 Allow

9 2

Via FIX Key

Tare Fix 0 Inhibit 1 Allow

2

Via FIX Key

708

9

709

Printing of Item Label Condition in Prepack Mode 0 Weight Change (More than +/-10e) 1 Remove Weight

9

710

Net / Gross Multi-interval 0 Gross Multi-interval

9 1

Net Multi-interval

Priority of Tare Operation 0 One Touch Tare Priority

1

Digit Tare Priority

Receipt mode 0 Allow

1

Inhibit

711

712

nd

2

9


32 of 32

SM-100 Flexible Barcode Setting Guide Operation

Display tare

weight

S1

-- -->

S46

-- -->

Unit price/kg

Remark

price

Press [mode] third PLU FILE

Enter programmer.

times Enter Press numeric 4 and 6

Flexible

Barcode

FLEXI BARCODE programme.

Press [*]

S46.0

F BAR

0

NO SET

Program Flexible Barcode.

Enter numeric 1

S46.0

F BAR

1

NO SET

Program Flexible Barcode 1. Program Flag Code.（0 for F2，1

Press [*]

S46.1

F BAR

0

FLAG

for F1F2，2 for non.）

Press [*]

S46.2

F BAR

0

ITEM CODE

Enter item code length. Enter data format for DATA1.( 0 for weight,1 for quantity,2 for unit

Press [*]

S46.3

F BAR

0

DATA1

price.3 for weight/quantity,4 for total price,5 for original price,6 for user programmable.)

Press [*]

S46.4

F BAR

0

DIGIT

Enter DATA1 length. Shift for DATA1.( 0 for no right shift,1 for right shift, 2 for right

Press [*]

S46.5

F BAR

0

SHIFT

shift x2, 3 for left shift, 4 for left shift x2, 5 for left shift x3.） Enter data format for DATA2.( 0 for weight,1 for quantity,2 for unit

Press [*]

S46.6

F BAR

0

DATA2

price.3 for weight/quantity,4 for total price,5 for original price,6 for user programmable.)

Operation

Press [*]

Display tare

weight

Unit price/kg

price

S46.7

F BAR

0

DIGIT

Remark

Enter DATA2 length.

Shift for DATA2.( 0 for no right shift,1 for right shift, 2 for right Press [*]

S46.8

F BAR

0

SHIFT

shift x2, 3 for left shift, 4 for left shift x2, 5 for left shift x3.） Press [ⅹ] to select the

Press [*]

S46.9

F BAR

NO MIDDLE CD

middle check digit. Press [ⅹ] to select the last

Press [*]

Press [*]

S46.1

S46.1

F BAR

F BAR

NO LAST CD

ITF BARCODE

check digit. Press [ⅹ] to swith ITF and EAN barcode.

Press [#]

S46

-- -->

FLEXI BARCODE

Save the flexible barcode 1.

Note: See the Flexible Barcode Usage Note at 《3.6.1 PLU programming》 in SM-100 Operation manual.

SM-100 Traceability Setting Guide Prepare ¾

Set SPEC258 to “1”

Traceability Programming Operation

Display Unit price/kg

price

Remark

tare

weight

[Mode] [Mode] [Mode]

S1

Æ

PLU FILE

[3] [4]

S34

Æ

COUNTRY FILE

[*] [1]

S34.0

[*][C][H][I][N][A]

S34.1

COUN

[#]

S34

Æ

COUNTRY FILE

Save Country No. 1

[3] [5]

S35

Æ

CUTTING HALL

Enter cutting hall programming

[*] [1]

S35.0

HALL

1

NO SET

[*][1]

S35.1

HALL

1

COUNTRY

Program cutting hall country No. 1

[*][C][U][T]

S35.2

HALL

CUT

Name 3

Program cutting hall name “CUT”

[#]

S35

Æ

Enter S mode

Enter country file programming

1

NO SET

Program country No. 1

CHINA

Name 5

Program country name “CHINA”

CUTTING HALL

Program cutting hall No. 1

Save cutting hall No. 1

Operation

Display tare

weight

Unit price/kg

price

S36

Æ

SLAUGHTER

HOUSE

Remark Enter

[3][6]

slaughter

house

programming

[*][1]

S36.0

HOUSE

1

NO SET

[*][1]

S36.1

HOUSE

1

COUNTRY

Program slaughter house No. 1

Program slaughter house country No.1 Program slaughter house name [*][S][L][A][U][G]

S36.2

HOUSE

SLAUG

NAME 5 “SLAUG”

[#]

S36

Æ

[4][7]

S47

Æ

[*][1]

S47.0

KIND

1

NO SET

Program kind file No. 1

[*][M][E][A][T]

S47.1

KIND

MEAT

NAME 4

Program kind name “MEAT”

[#]

S47

Æ

KIND FILE

[4][8]

S48

Æ

CATEGORY FILE

[*][1]

S48.0

CATEG

1

NO SET

Program category No. 1

[*][B][E][E][F]

S48.1

CATEG

BEEF

NAME 4

Program category name “BEEF”

[#]

S48

Æ

SLAUGHTER

HOUSE

Save slaughter house No. 1

KIND FLIE

Enter kind file programming

CATEGORY FILE

Save kind file No. 1

Enter category file programming

Save category file No. 1

Operation

Display Unit price/kg

Remark

tare

weight

price

[4][9]

S49

Æ

[*][1]

S49.0

BREED

1

NO SET

Program breed file No. 1

[*][B][U][L][L]

S49.1

BREED

BULL

NAME 4

Program breed name “BULL”

[#]

S49

Æ

BREED FILE

[3][7]

S37

Æ

TRACEABILITY

[*][1]

S37.0

TRACE

1

NO SET

Program traceability No. 1

[*][1]

S37.1

TRACE

1

BORN

Choose born country No. 1

[*][1]

S37.2

TRACE

1

FATTEN

Choose fatten country No. 1

[*][1]

S 37.3

TRACE

1

S HOUSE

Choose slaughter house No. 1

[*][1]

S37.4

S CNT

1

LNK 1

BREED FILE

Enter breed file programming

Save breed file No. 1

Enter traceability programming

Choose link country No. 1 for slaughter house

[*][1]

S37.5

TRACE

1

C HALL

[*][1]

S37.6

C CNT

1

LNK 1

Choose cutting house No. 1

Choose link country No. 1 for cutting hall

[*][1]

S37.7

TRACE

1

ORIGIN

Choose original country No. 1

Operation

Display

Remark

tare

weight

Unit price/kg

price

[*][R][C][D]

S37.8

R-CD

RCD

NAME 3

Program R-CD content “RCD”

[*][G][T][I][N]

S37.9

GTIN

GTIN

NAME 4

Program GTIN content “GTIN”

[*][L][O][T]

S37.10

LOT

LOT

NAME 3

Program LOT content “LOT”

[*][1]

S37.11

TRACE

1

KIND

[*][1]

S37.12

TRACE

1

CATEG

Choose category No. 1

[*][1]

S37.13

TRACE

1

BREED

Choose breed No. 1

[*][C][O][N][T]

S37.14

CONT

CONT

NAME 4

Program cont content “CONT”

[*][0][6][0][3][1][0]

S37.15

TRACE

060310

EAT D

Program eat by date “06/03/10”

[*][5][0][0][0]

S37.16

TRACE

5.000

WEGHT

Program maximum weight “5kg”

[*][S][C][D]

S37.17

S CD

SCD

NAME 3

Program S CD content “SCD”

[*][S][N][M]

S37.18

S NM

SNM

NAME 3

Program S NM content “SNM”

[*][S][A][D][1]

S37.19

S AD1

SAD1

NAME 4

Program S AD1 content “SAD1”

[*][S][A][D][2]

S37.20

S AD2

SAD2

NAME 4

Program S AD2 content “SAD2”

[#]

S37

Æ

TRACEABILITY

Choose kind No. 1

Save traceability No. 1

Free Format Programming ¾ ¾

Enter “S12 Æ FREE FORMAT”, press [*] Edit the correlative items for traceability in free format

PLU ITEM Programming ¾ ¾

Enter “S19 Æ PLU ITEM”, press [*] Set “ Item TRACE” to “PROGRAM” and press [#] to save

PLU Programming ¾ ¾ ¾

When you edit PLU, set “S1.64 PLU” to “TRACE ALLOW” and press [*] Input traceability number and press [#] to save In the end, when you call the PLU and print label, you’ll see the traceability information on the label

SM-100 Nutrition Fact Setting Guide Concept Nutrition uses fix template to print. Totally It has 12 fix templates(No. 70 ~ No. 81).

Setting Method 1. 2. 3. 4. 5. 6.

7. 8. 9. 10. 11. 12.

Enter S mode Enter “S19 --- PLU ITEM” and set “IMAGE” and “NUTRI” to “PROGRAM” Enter “S12 --- FREE FORMAT” Enter “S12.5 IMG 1 Å 47 F ITEM” to “S12.5 IMG 10 Å 56 F ITEM” to set the print area of Nutrition. (In each label format, totally you can print 10 images) Enter “S1 --- PLU FILE” to create PLU. Enter “S1.50 PLU 0 IMAGE 1” to choose the template number for IMAGE 1 (From No. 70~ No. 81). … Enter “S1.59 PLU 0 IMAGE 10” to choose the template number for IMAGE 10 (From No. 70~ NO. 81). Set “S1.81 PLU PRINT NUTRI” to set nutrition print status to “Print”. Enter from S1.82 to S1.10 to input nutrition contents. For extra details on the Nutrition Fact, Enter S11: TXT form to edit by hands. Enter “S12 --- FREE FORMAT” to set up the TXT position. Press [PLU] key to save.

PCFL-1 Operation Guide Shanghai TERAOKA Electronic Co., Ltd. --- Technical Support Dept.

8

Tel: +86-21-6408-5151 Fax: +86-21-6408-3468 E-Mail: [email protected]

Note: this guide is available just for SM series expect the SM-100. 一、 The link of the hardware Link the PC with scale via RS232C.

二、 Operation 1. The Spec setting in the scale 3 for SPEC51

(The SIO baud rate is 9600. )

1 for SPEC52

(The SIO data length is 8.)

0 for SPEC53

(No SIO parity digit.)

0 for SPEC54

(1 bit stop bit.)

2 for SPEC60

(SIO work via PCFL-1)

2. The setting in the software 1) open the software


8


2) the com port setting

Please note: a) The com port should be the same as the one used in your computer. b) The com port setting must be same as setting in the scale. 3) the folder for save


8


Note: You could set the default folder for save the data received from the scale. 3. Operation 1) receive the data from the scale


8


Note: You could press the key to receive the data from scale. 2) send the data to scale

Note: You could press the key to send the data to scale. 2) the operation in the scale Display

Remark

Operation Weight Unit price

Price

Z

[M][0][M][M]

DAILY

0

CLR

X

Enter the [Z] mode

[zero]+[0][1][0]

BAC

PLU

FILE

X

Press preset key [7]or [8] to select

Preset key [8]

BAC

FOR

FILE

X

the transmit item: PLU, Format,

Preset key [8]

BAC

OTH

FILE

X

Others or All.

Preset key [8]

BAC

ALL

FILE

X

PCFL-1 Operation Guide Shanghai TERAOKA Electronic Co., Ltd. --- Technical Support Dept. Tel: +86-21-6408-5151 Fax: +86-21-6408-3468 E-Mail: [email protected]

[*]

BAC

SA TO

FL-1

X

Press preset key [7]or [8] to select the transmit method: save data to

Preset key [8]

BAC

RD FR

FL-1

X

Preset key [8]

BAC

COMP

FL-1

X

data with FL-1.

[*]

T-OUT

OPN

GOOD

X

Transmit successfully.

[Tare]

DAILY

0

CLR

X

Back to Z mode.

Jasonzhou, Shanghai Teraoka Electronic Co.,Ltd Technical Service Dept. th

Dec. 7 ,2005

FL-1,read data from FL-1,verify

SM100

ERROR MESSAGE

9. SM100 ERROR MESSAGE ERROR MESSAGE The machine beeps and following error messages appear on display, if incorrect operation is performed. No.

Error Message

Causes Label sensor sense no label. No more labels. Replace

1

PAPER END

2

FEED PAPER FIRST

Label miss feed, press FEED key to align label.

3

PEEL LABEL

Peel sensor activated, remove label away from sensor.

4

CHANGE PAPER

Change paper mode between label and receipt.

6

NON PRINT

No manual printing.

7

UNIT PRICE OVERFLOW

Please check unit price.

9

NON LABEL

12

MEMO NOT INITIALIZED

Memory problem. Please clear the memory.

14

HEAD IS NOT CLOSED

Thermal head no closed. Please close thermal head.

16

FILE MEMORY FULL

18

PLEASE REMOVE WEIGHT

Fixed price item, please remove weigh.

19

PLU NOT EXIST

No such PLU data or number exists.

20

TOTAL PRICE IS 0

24

WEIGHT OF

Weight over maximum capacity when print.

26

TOTAL PRICE OVERFLOW

Total price over the limit to display or print.

29

PLEASE SET TARE VALUE

When force tare is enable, a tare weight must be entered.

39

PLEASE PRESS PLU KEY

Press PLU(#) key. To save data in some procedure.

44

KEY ALREADY ASSIGNED

Preset key already been assigned with function or PLU.

48

PLU DATA INVALID

U1 only. Quantity setting incorrect when using FOR.

49

QTY OF

Quantity data over the limit.

54

BELOW MIN WEIGHT

Weight is below min weight set when printing.

57

PRICE ACC OF

Accumulated quantity over the limit.

59

PLEASE SEE LABEL QTY

Set print label quantity when the function is use.

61

GRAND TOTAL OF

Grand total price over the limit.

71

PRINT INHIBITED

Cannot print weigh item at Prepack mode.

74

SELF SERVICE MODE

Can only use Self-service procedure only.

95

CAL00 ERROR

Zero point calibration error.

96

CALSP ERROR

Full scale point Calibration error.

97

FORMAT ERROR

No free format is program.

98

NO DATA IN REPORT

There is no data in report when printing report.

99

EXCEED WEIGHT QUOTA

CN only. Please reset weight quota.

label roll

No free format is programs. Set a free format or use standard format.

Not enough memory. Expand memory or delete unnecessary data.

No total price for item. Unit price, weight or quantity is 0.

SM100

ERROR MESSAGE

FATAL MESSAGE No.

Fatal Error Message

F002

External flash memory erase error

F003

External flash memory program error

F004

External flash memory program error

F005

Internal RAM read/write error

F006

External RAM read/write error

F007

External ethernet IC read/write error

Service Manual: Model

Recommend Documents