Sandvik LH202
Technical Specification LH202-Revision 1
1/8
General Arrangement
3048 (120) 2032 (80)
17
991 (39)
LH202
2134 (84) 1397 (55) o
1753 (69)
508 (20)
229 (9) 940 1880 (37) (74) 5486 (216)
1219 (48)
1448 (57)
40°
2.4 m 8.0 ft
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
R 1905 (75)
Note: All dimensions in millimeters. Dimensions in brackets are in inches. All vertical dimensions represent an empty unit. Standard SAE ROPS/FOPS cannopy shown
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
1321 (52) 1372 (54)
R 3734 (147)
Sandvik LH202
Technical Specification LH202-Revision 1
2/8
Standard Unit Specifications General Information
Power Train
Main Dimensions
Engine 5486 mm 1372 mm 1448 mm 2134 mm
216 in 54 in 57 in 84 in
Operating Weights Total operating weight 6759 kg front axle 2327 kg rear axle 4432 kg
14900 lb. 5130 lb. 9770 lb.
Loaded Weights Total loaded weight front axle rear axle
9706 kg 6813 kg 2893 kg
21400 lb. 15021 lb. 6379 lb.
Capacities Tramming capacity Break out force, lift Break out force, tilt Tipping load Standard bucket
6500 lb. 3791 kg 4750 kg 14230 lb. 1.5 yd³
8340 lbf 10450 lbf
6.5 sec. 4.3 sec. 3.0 sec.
Driving Speeds Forward and Reverse (Loaded) 0 to 15.5 km/h (9.6 m.p.h.)
Frame Frames Material Central hinge
Material Lift arms Material Tanks
Welded steel box construction G40.21 - 50WT-CAT#3 Welded steel box construction with hardened steel spherical bearings G40.21 - 50WT-CAT#3 Solid plate construction G40.21 - 50WT-CAT#3 Welded to frame.
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
Deutz F5L-912W 51 kW (68 Hp) @ 2300 rpm 229 Nm (169 lbf-ft) @ 1550 rpm In line, 5 4.7 l (287 in³) Air cooled Swirl chamber, four stroke Donaldson, dry type 24 V 68 l 18 US gal.
Transfer Case Dana SOH
Gear drive 2.39:1
Transmission Rexroth AA4V56
2948 kg 37 kN 46 kN 6468 kg 1.2 m³
Bucket Motion Times Raising time Lowering time Dumping time
Diesel engine Output Torque Number of cylinders Displacement Cooling system Combustion principle Air filtration Electric system Fuel tank capacity
Hydrostatic transmission with forward and reverse
Axles Front axle Rear axle Centre articulation/ oscillation
Dana SOH 12D0840, conventional differential, fixed. Dana SOH 12D0840, no-spin differential, fixed. 16 °
Tires Tire size Air pressure, front Air pressure, rear
9.00 X 20, 18 PLY 517 kPa 5.17 bar 517 kPa 5.17 bar
75 psi 75 psi
Systems Steering Hydraulics Closed centre system with a single fixed displacement gear pump. One double acting steer cylinder equipped with electro./mechanical control lever.
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
Total length Width over tires Maximum width Height with canopy
Sandvik LH202 Turning Radius Inner Outer Turning angle
All manuals are delivered on CD-ROM in web based format with Adobe PDF output for printing extra copies and one paper copy. Extra copies are also available as an option.
75 in 147 in
Main Components Hydraulic pump Control valve Steering cylinders
Gear Electro. / mechanical EJC 3.5" bore x 1.75" rod (89 mm x 44 mm)
Pressure Settings 15.2 MPa 152 bar 17.2 MPa 172 bar
2200 psi 2500 psi
Bucket Hydraulics Full hydraulic open-centre system with one gear pump. Equipped with electro./mechanical control lever, two lift cylinders and one dump cylinder.
Dump Cylinder Hydraulic pump Control valve
EJC 4.0" bore x 2.0" rod (102 mm x 51 mm) EJC 6.5" bore x 3.5" rod (165 mm x 89 mm) Gear pump Electro. / mechanical
Pressure Settings Main relief Bucket dump Bucket roll back Raise/lower arms Hyd. oil tank cap.
15.2 MPa 5.5 MPa 17.2 MPa 17.2 MPa 114 l
Manual Type Spare parts manuals Operator’s manual Service manual
CD-ROM 2 Copies 2 Copies 2 Copies
Paper 1 Copy 1 Copy 1 Copy
Optional Equipment Specifications Available Alternative Equipment Exhaust system Fume diluter with purifier MSHA FOPS canopy 1981 mm (78") over all height
Alternative Bucket Options
Main Components Lift cylinders
3/8
Standard Manuals
1905 mm 3734 mm 40 °
Main relief Port relief valves
Technical Specification LH202-Revision 1
Rock Buckets
Ejector Buckets
Volume 1.0 m³ 1.3 m³ 1.5 m³ Volume 1.0 m³
1.25 yd³ 1.75 yd³ 1.9 yd³ 1.25 yd³
Width 1345 mm 1422 mm 1473 mm Width 1422 mm
53 in 56 in 58 in 56 in
Available Add-On Options 152 bar 55 bar 172 bar 172 bar 28 US gal.
2200 psi 800 psi 2500 psi 2500 psi
Standard Brakes Dynamic service braking through the hydrostatic transmission. The parking brake is a spring applied, hydraulically released enclosed disc brake mounted on the front axle pinion.
Main Components Pressure accumulator Piston type with charge valve
Quick disconnect system (QDS) - master hitch QDS bucket 1.1 m³ 1.5 yd³ QDS pallet forks Altitude compensation kit for Deutz F5L-912W engine Fire suppression Manual - Ansul 4 nozzle systems Auto. - Ansul 4 nozzle (Checkfire II) Hand held fire extinguisher - 10 lb. Tamrock proportional RRC receiver cover/cable and interface RRC interface only (specify receiver) RRC fire suppression actuation for Tamrock RRC Extra CD-ROM manuals Extra paper manuals
Electrical Equipment 24 V 35 A min. 2 x 12 V, 950 CCA 24 V Heavy Duty 2 front, 2 rear
Other Standard Equipment • • • • •
SAE ROPS/FOPS canopy Electric gauges Audible back-up alarm Central manual lubrication system SAE JIC hose fittings
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
Alternator Batteries Starter Driving and working lights
Additional Information LH202-Revision 1
Sandvik LH202
4/8
Tractive Effort Curve (Metric Units)
Rolling Resistance % 50
LH202 ENGINE:
DEUTZ F5L-912FW
TRANS:
45
AXLES:
Rexroth AA4V56 Hydrostatic
TIRES: Payload:
12D0840
EMPTY
9.00 X 20, 18 PLY XMD2
LOADED 0 2 4 6 8
0 2 4 6 8
2 832 kg
GRADE %
40
Tractive Effort (kN)
35
30 30%
25 25%
20 30%
20%
25%
15 15% 20%
10 15%
10%
10%
5
5%
0 0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Speed (km/h)
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
5%
Additional Information LH202-Revision 1
Sandvik LH202
5/8
Tractive Effort Curve (US Units)
12
Rolling Resistance %
LH202 ENGINE: TRANS:
11
AXLES: TIRES:
DEUTZ F5L-912FW Rexroth AA4V56 Hydrostatic
PAYLOAD:
12D0840 9.00 X 20, 18 PLY XMD2
0
EMPTY 2 4 6 8
0
LOADED 2 4 6 8
6 500 lbs
10
9
GRADE
Tractive Effort (klbf)
8
7
30%
6
25%
5 30%
20%
4 25% 15%
3
20% 15%
10%
2 10% 5%
0 0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Speed (mph)
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
5%
1
Additional Information LH202-Revision 1
Sandvik LH202
6/8
Productivity Curve (Metric Units) LH202 PRODUCTIVITY CURVE 250 Basic data for calculations: Payload 2948 KG Overall Speed limit 10 km/h Fixed Cycle time 0.5 min
225
200 Fixed cycle time includes the time for filling, dumping, turning and accelerating
TONNES PER HOUR
175
Slope/Grade (%) Loaded speed (km/h) Empty speed (km/h)
150
Hor./0 10 10
1:10/10 9.7 10
1:7/15 7.2 10
1:5/20 5.7 10
125
100
75
50
25
0 0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
0%
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
10%
15%
20%
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
ONE WAY DISTANCE IN METRES
Additional Information LH202-Revision 1
Sandvik LH202
7/8
Productivity Curve (US Units) LH202 PRODUCTIVITY CURVE 300 Basic data for calculations: Payload 6500 lb Overall Speed limit 6.2 mph Fixed Cycle time 0.5 min
280 260 240
Fixed cycle time includes the time for filling, dumping, turning and accelerating
220 Slope/Grade (%) Loaded speed (mph) Empty speed (mph)
TONS PER HOUR
200 180
Hor./0
1:10/10
6.2 6.2
6.0 6.2
1:7/15
1:5/20
4.5 6.2
3.5 6.2
160 140 120 100 80 60 40 20 0 0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
Sandvik Mining and Construction 4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Tel.: (905) 632-4940
Revision Date: 2008-25-08 Web: http://www.sandvik.com
Copyright © Sandvik Mining and Construction All weights, dimensions and other data reflect a standard unit unless otherwise stated. Sandvik Mining and Construction reserves the right to change this specification without notice
ONE WAY DISTANCE IN FEET
We make it possible
Sandvik Mining and Construction
4445 Fairview Street, Burlington Ontario, Canada L7L 2A4 Web: http://www.sandvik.com
Tel.: (905) 632-4940