Turns the TV on/off.
Changes the channel. MORE
SOURCE Changes the source.
Displays a virtual remote control on the screen. The virtual remote control consists of a number panel, a playback control panel, and a quick access panel. Use the touchpad to select numbers and buttons.
STB Turns on and off the satellite or cable set-top box connected to the TV. For this, the Smart Touch Control must be configured as a universal remote control.
2-22
The colour buttons work differently, depending on the function that the TV is currently performing.
VOL
RETURN/EXIT
Adjusts the volume.
Returns to the previous menu.
VOICE
SMART HUB
Run Voice Recognition. To speak a voice command, press and hold the VOICE button and say a voice command.
Launch Smart Hub. While an application is running, pressing the Smart Hub button terminates the application.
MUTE / AD
GUIDE
Turns the TV sound on/off.
Check the digital channel broadcasting schedule.
2. Product specifications
Reconnecting the Smart Touch Control Unit Use the touchpad to perform various commands. Navigate to Guide (System → Device Manager → Smart Touch Control Settings → Guide) to view an on-screen guide to using the Smart Touch Control. • Dragging Drag on the touchpad in the desired direction. Move the focus or the pointer in the direction the finger is dragging.
• Tap Tap on the touchpad. This selects the focused item.
• Flicking Flick on the touchpad in the desired direction. This moves the focus or scrolls the screen based n the direction and speed of the flick.
• Tapping and Holding Tap and hold on the touchpad for at least 3 seconds. This gives you access to hidden features included in certain applications.
• Tapping and Dragging Tap on the touchpad, drag and release. This moves the selected web item in a webpage or your current location on a map.
2-23
2. Product specifications • Scrolling Up/Down Scroll up/down the line on either the left or right edge of the touchpad. This scrolls a webpage or a list up/down. This scrolling feature easily accommodates both right-handed and left-handed users.
• Scrolling Left/Right Scroll left/right on the line at the top or bottom edge of the touchpad. This scrolls a horizontal webpage or the Smart Hub panel to the left/right.
2-24
2. Product specifications
2-4-4. IR Blaster Using wired IR Blaster 1. Push the Smart Control Key. -- Key Data is transmitted to the TV. (Bluetooth) 2. Key Data is transmitted to the IR Blaster MCU. -- Uart (the internal communication of TV) 3. External Device is operated. -- IR Transmit . (IR blaster → Device) Main TV Plugged IR
Bluetooth Legacy Device
Smart Control
Not using wired IR Blaster 1. Push the Smart Control Key. -- Key Data is transmitted to the TV. (Bluetooth) 2. Key Data is transmitted to the Smart Control. -- Bluetooth 3. External Device is operated. -- IR Transmit (Smart Control → Device) Main TV
Bluetooth IR
Smart Control Legacy Device
2-25
2. Product specifications
2-4-5. SMART Interaction (The camera is sold separately.) This Smart TV is enabled with SMART Interaction, a facial- and movement-recognition feature that allows users to control the TV without the need for a remote control. To use SMART Interaction, you will need to purchase and install a separate camera. SMART Interaction makes it possible to configure settings and access features with ease. It takes approximately 15 seconds for motion recognition to come online after turning on the TV.
Face Recognition This product saves thumbnail images of users' faces for use during the Face Login. Logging into the Smart Hub via face recognition may be less secure than logging in using an ID and password. Users can register their faces and log into their Smart Hub accounts through Face Recognition. One face may be registered per account. Depending on the ambient brightness level and the user's skin tone, the TV may have difficulty recognizing the user's face. • Face Registration A Smart Hub login is required to register a face. Log into the Smart Hub. Create a new account if you do not already have one. • Face Recognition Login Select Face Recognition Mode from the login window. The TV automatically recognizes a user's face. If recognition fails, try again. If the password entry option has been enabled under Change account information, you need to enter your password as well in order to log into the Smart Hub.
TV Camera Use Under some circumstances and under certain legal conditions, the use/misuse of the TV camera may result in legal liability. There may be obligations under local privacy laws regarding the protection of individuals concerning personal data and on the free movement of such data, and possibly other laws including criminal laws, regulating camera surveillance both in the workplace and elsewhere. By using the TV camera, users agree that it will not be used (i) in locations where cameras are generally prohibited (such as bathrooms, locker rooms or changing rooms), (ii) in any manner that will result in an invasion of a person’s privacy or (iii) in violation of any applicable laws, regulations or statutes. If you are using a camera, first check the back for a sticker Remove the sticker cover before adjusting the TV camera angle. When you are no longer using the camera, rotate the lens downward and secure it in place. This prevents any inadvertent or unintentional camera operation,
Motion Control Environment Test Screen Menu → Smart Features → Motion Control Use Motion Control to change the channel, adjust the volume, move the pointer, and control other TV functions. Some applications may not support Motion Control.
Operating Environment Users should be located between 1.5m and 4m from the camera. The actual recognition range may vary depending on the camera angle and other factors. Motion Control relies on the TV camera and therefore will not function if the camera is pointed up or down. Adjust the camera to the correct angle. Do not point the camera directly at the sun or any other light source or obstruct its view. In order for the camera to recognize movement, the user has to stand out from the background. The appropriate ambient brightness is between 50 to 500 lux. Avoid direct sunlight when using Motion Control. Run Motion Control Environment Test before using Motion Control to determine the camera's recognition range.
2-26
2. Product specifications
Motion Control Environment Test Screen Menu → Smart Features → Motion Control → Motion Control Environment Test Run this test before using Motion Control to ensure proper functionality 1. Run Motion Control Environment Test and select Start within 4.9ft and 13.1ft of the TV. If light reflects on the TV 2. Adjust the camera angle so that you appear inside the square displayed on the screen. Once you have finished
Motion Control Options Motion Control: Activates/deactivates Motion Control. Animated Motion Guide: Displays an animated guide when user motion is detected.
Motion Control Activvation Raise your hand with the palm facing the TV. Hold it for a moment and slowly wave your arm and hand from side to side three or four times. When your hand is successfully recognized, the Motion Control is activated and an arrow cursor is displayed on the screen.
Using the Basic Motion Controls The following basic motion control commands are available: Zoom
This action moves the cursor to the desired position.
Run / Select
Make a fist to select an option or execute a command. Keeping your fist clenched is like holding down a remote control button.
Zoom
Make a circle with your hand in the counterclockwise direction to return to the previous menu.
Motion Control Screen
Screen Icons
Explanation Adjust the volume. Turns the TV sound on/off. Changes the channel. Launch Smart Hub. Check the recommended program information and air times. Select a program from the list to view detailed information about that program. Enter a channel number using the number panel to jump to the channel. Use the playback control panel with the on-screen color buttons to control a media file that is currently playing. Change the source. Turn off the TV.
2-27
2. Product specifications
2-4-6. SMART HUB This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, users can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can enjoy photo, video, and music files stored on external storage devices.
5. Social
4. Apps
Social Content
Apps & Signature SVC
1. [HOME] On TV
2. Movies & TV Shows 3. Photos, Videos & Music
Advaced EPG
Watching history baes
On TV This functions is only available on U.S and Canada. While you watch TV, a list of recommended programs on other channels appears on the screen. You can use this list to change the channel and find out more information about the recommended programs including how much time is left until they air.
Movies & TV Shows Purchase and watch movies and series without a separate external device. This functions is only available on U.S and Canada. Users can buy movies and TV shows online. Open Smart Hub and select Movies & TV Shows. This service may be not available depending on the country or region.
Movies & TV Shows Play back photo, video, and music files from an external storage device. Open Smart Hub and select Photos, Videos & Music. Enjoy photo, video and music files from an external storage device directly on your TV. Back up important files before connecting an external storage device to the TV. Samsung will not be held responsible for damaged or lost files.
2-28
P-VoD
User EPG
From AllShare
2. Product specifications
Social Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).
Apps Download and install applications such as WebBrowser and Family Tree. Samsung Apps offers an extensive collection of free and paid news, sports, weather, and gaming content you can directly download to and enjoy on your TV. First, check the network and make sure the TV is connected to the Internet. Your TV needs to be connected to the Internet in order to use Apps.
• Samsung Apps Samsung Apps offers various free and paid news, sports, weather, and gaming applications. Samsung Apps lets you search for applications and install them directly on your TV. Read and agree to the terms and conditions of use and then browse through the categories or directly search for applications. • Fitness Fitness is an application that helps you stay fit. Create a profile, set up an exercise plan, and start exercising according to a structured regimen. Read and agree to the terms and conditions before using Fitness. • Kids This is a quick launcher and recommended list for applications and content that is suitable for children and even provides services not currently installed on your TV. Using Kids, you can download applications and content for your children to your TV. Certain services, however, are fee-based. • WebBrowser WebBrowser is a web-browsing application. Using WebBrowser, you can browse the Internet on your TV as you would on your computer and even watch TV while you surf the web. The browsing experience, however, may not be the same as it is on your computer. Use a keyboard and mouse for a more convenient web browsing experience. • Social Networks Share your thoughts and comments about a program on the air through social networking services. Social Networks displays social network services such as Twitter, Facebook, Google Talk, and NateOn on a single screen. You can even post messages and comments in the same manner as you would using a computer. You must first link your Samsung account to the respective SNS accounts before you can access them using Social Networks.
2-29
2. Product specifications
2-4-7. 3D Display What is 3D Display? This mode is to enables users to view images on the TV/Monitor in 3D by receiving the video signal in 3D format from sources such as 3D games and titles. The human brain constructs a 3 dimensional image from the two images entering both eyes. The depth of a 3 dimensional images is determined by the horizontal difference between the images from both the left and right eyes. 3D is displaysed two images alternately on screen equivalent to left and right at TV, and embodies by doing to see each relevant image in left eye and right eye through shutter glasses.
3D Function of Model Series LCD / LED / PDP TV
LED
Sub Items
120 Hz
Platform (Main)
X12
Platform (FRC / Formatter)
Fox-FT1 (SDC) Fox-FT2 (AUO / CMI) Echo-Fs (Sharp 3D) NT7231 2 (Sharp 2D)
Items
3D Feature
FRC Feature
2D → 3D Coversion
O
3D → 2D
O
3D Perspective
O
3D Depth
O
Auto View (Auto Format Detection)
X
3D Optimize
O
Auto Motion Plus ATV / AV, PC Component
HDMI
O 2D → 3D
O
2D → 3D
O
SS, TB
O
2D → 3D
O
SS, TB
O
FP 1080P 24 / 25 / 30 FP 720P 50 / 60
O
FP 1080i 50 / 60 HDMI (PC / DVI) 3D Input Format
HDMI (PC / DVI)
LL, VS, Check ker BD, FS
X
2D → 3D
O
SS, TB
O
MPO
O
SVAF IES (SS, BT)
O
MVC 1080P 24 / 25 /30 MVC 720P 50 / 60 MVC 1080i 50 / 60
O
MVC 720P 24 / 25 /30
DTV
2-30
2D → 3D
O
SS, TB
O
DVB_Phasel (SS, BT)
O
ATSC_KR30
O
2. Product specifications
Surpported 3D Resolutions These specifications apply to a display ratio of 16:9 only. • 3D Format: L/R, T/B Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60
1920 x 1080i
59.94 / 60
1920 x 1080p
23.98 / 24 / 29.97 / 30 / 59.94 / 60
• 3D Format: Frame Packing Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60
1920 x 1080i
59.94 / 60
1920 x 1080p
23.98 / 24 / 29.97 / 30
• Component Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60
1920 x 1080i
59.94 / 60
1920 x 1080p
23.98 / 24 / 29.97 / 30 / 59.94 / 60
• Digital Channel Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60
1920 x 1080i
59.94 / 60
3D Format Test 3D Format : There are several 3D formats existing on how to merge Left and Right images.
Format Frame Packin (HDMI 1.4)
Input images
Test Method Able to test only by HDMI 1.4 BD Player or MSPG-4600MT(Master Device) Using Format_test.bmp
Top & Bottom
• Check in the PC(HDMI) source. PC resolution and format resolution must be same • Wearing 3D glass, left eye sees only ‘L’ letter, right eye sees only ‘R’ letter (close your eyes one by one) Using Format_test.bmp
Side by Side
2D → 3D
• Check in the PC(HDMI) source. PC resolution and format resolution must be same • Wearing 3D glass, left eye sees only ‘L’ letter, right eye sees only ‘R’ letter (close your eyes one by one) Check in the normal 2D source. Check not in the test pattern but in the actual video. • Left/Right black region will grow more and more as the depth goes higher.
2-31
3. Disassembly and Reassemble
3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LED TV. This LED TV contains electrostatically sensitive devices. Use caution when handling these components. WARNING
3-1. Disassembly and Reassembly 1. Disconnect the LED TV from the power source before disassembly. 2. Follow these directions carefully; never use metal instruments to pry apart the cabinet. CAUTION
3. If there is no additional coment, it is same for all inches.
3-1-1. LED TV 32 / 40 / 46 Inches Description
1
Place TV face down on cushioned table.
2
Remove 4 screws from the ASSY GUIDE P-STAND.
Picture Description
Screws
Torque : 9~11Kgf.cm. 128~156psi
6003-001782
SCREW-MACHINE M4.0, L12.0 BLK
3
Remove STAND.
3-1
3. Disassembly and Reassemble Description
4
Picture Description
Screws
Remove the COVER-JACK after push the locking in both sides. COVER-JACK
5
Remove screws of ASSY COVER P-MIDDLE, REAR. • 32 inch : 9 EA
Torque : 7~8Kgf.cm. 100~113psi
• 40 inch : 14 EA • 46 inch : 14 EA 6001-002755
SCREW-MACHINE M3.0, L6.0 BLK
• 32 inch : 2 EA • 40 inch : 2 EA
Torque : 9~11Kgf.cm. 128~156psi
• 46 inch : 3 EA
6003-001782
SCREW-MACHINE M4.0, L12.0 BLK
3-2
3. Disassembly and Reassemble Description
6
Picture Description
Screws
Disconnect the ASSY BOARD P-JOG SWITCH & IR Cable. NOTE
ASSY BOARD P-JOG SWITCH & IR Cable
First remove the cable before you remove the ASSY COVER P-MIDDLE, REAR.
7
Remove the ASSY COVER P-MIDDLE, REAR.
8
Remove the Power Cables and Speaker Cables. Remove the LVDS Cable and Panel Drive Cable.
Power Cable Power Cable
NOTE Applied to Double locking.
Speaker Cable
1. Flip up the locking tab on top of the connector. 2. Squeeze the edge of the connector to release the second tab lock and gently pull the connector away. LVDS Cable
Panel Drive Cable
LVDS Cable
9
Remove the screws of ASSY PCB MAIN.
Torque : 7~8Kgf.cm. 100~113psi
6001-002756
SCREW-MACHINE M3.0, L6.0 WHT
3-3
3. Disassembly and Reassemble Description
10
Picture Description
Remove the screws of DC VSS-LED TV PD BD.
Screws Torque : 7~8Kgf.cm. 100~113psi
6001-002756
SCREW-MACHINE M3.0, L6.0 WHT
11
Remove the ASSY SPEAKER (L/R).
Speakers(L)
12
Remove the 4 screws of ASSY T CON and unlock the locking of T CON Cable.
Speakers(R)
Torque : 7~8Kgf.cm. 100~113psi
6001-002756
T CON Cable
13
Completed disassembly. • Panel.
NOTE Reassembly procedures are in the reverse order of disassembly procedures.
3-4
SCREW-MACHINE M3.0, L6.0 WHT
3. Disassembly and Reassemble
55 Inches Description
1
Place TV face down on cushioned table.
2
Remove 4 screws from the ASSY GUIDE P-STAND.
Picture Description
Screws
Torque : 9~11Kgf.cm. 128~156psi
6003-001782
SCREW-MACHINE M4.0, L12.0 BLK
3
Remove STAND.
4
Remove screws of ASSY COVER P-REAR. • 55 inch : 4 EA
Torque : 7~8Kgf.cm. 100~113psi
6001-002755
SCREW-MACHINE M3.0, L6.0 BLK
• 55 inch : 4 EA
Torque : 9~11Kgf.cm. 128~156psi
6003-001782
SCREW-MACHINE M4.0, L12.0 BLK
3-5
3. Disassembly and Reassemble Description
5
Picture Description
Remove 17 screws of ASSY COVER P-MIDDLE.
Screws Torque : 7~8Kgf.cm. 100~113psi
6001-002755
SCREW-MACHINE M3.0, L6.0 BLK
Remove 1 screws of ASSY COVER P-MIDDLE.
Torque : 9~11Kgf.cm. 128~156psi
CAUTION Becareful when you lift up the ASSY COVER P-MIDDLE, It's really sharp.
6003-001782
SCREW-MACHINE M4.0, L12.0 BLK
6
Disconnect the ASSY BOARD P-JOG SWITCH & IR Cable. NOTE First remove the cable before you remove the ASSY COVER P-MIDDLE.
7
Lift up the ASSY COVER P-MIDDLE.
8
Remove the ASSY COVER P-MIDDLE.
3-6
ASSY BOARD P-JOG SWITCH & IR Cable
3. Disassembly and Reassemble Description
9
Picture Description
Remove the Power Cables and Speaker Cables. Remove the LVDS Cable and Panel Drive Cable.
Screws
Power Cable Power Cable
NOTE Speaker Cable
Applied to Double locking. 1. Flip up the locking tab on top of the connector. 2. Squeeze the edge of the connector to release the second tab lock and gently pull the connector away.
LVDS Cable
Panel Drive Cable
LVDS Cable
10
Remove the screws of ASSY PCB MAIN.
Torque : 7~8Kgf.cm. 100~113psi
6001-002756
SCREW-MACHINE M3.0, L6.0 WHT
11
Remove the screws of DC VSS-LED TV PD BD.
Torque : 7~8Kgf.cm. 100~113psi
6001-002756
SCREW-MACHINE M3.0, L6.0 WHT
12
Remove the ASSY SPEAKER (L/R).
Speakers(L)
Speakers(R)
3-7
3. Disassembly and Reassemble Description
13
Picture Description
Remove the 4 screws of ASSY T CON and unlock the locking of T CON Cable.
Screws Torque : 7~8Kgf.cm. 100~113psi
6001-002756
T CON Cable
14
Completed disassembly. • Panel.
• ASSY COVER P-MIDDLE.
NOTE Reassembly procedures are in the reverse order of disassembly procedures.
3-8
SCREW-MACHINE M3.0, L6.0 WHT
★ C 0.6 ± 0.1 CROSS #2(3.56) RECESS
B 8.0R
3. Disassembly and Reassemble M4.0 x 1.8 TAPPING △ B-TYPE
C
Screw Size Code No.
COLOR
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
A 특수 Punch D:7.5 B CROSS #2(3.08 RECESS
D
Screw Image M3 x 0.5 PITCH SCALOCK
C
인치
6003-001782
BLACK
7.80~8.20 1.85~1.95 3.81~3.91 11.4~12.0
E
-
A
B
D M3 x 0.5 PITCH TRAP 도포 SCALOCK
CROSS #2(★M3.0F) RECESS
C
인치
B
6001-002755
BLACK
7.1~7.5
6001-002756
WHITE
5.6~6.0
1.9~2.0
2.98~3.02
5.7~6.0
4.4~5.4
1.15~1.25 2.92~2.98
3.7~4.0
4.4~5.4
A
B
D TRAP 도포
3-9
3. Disassembly and Reassemble
3-1-2. ASSY BOARD P-RF-MODULE Description
1
Preparation : BN81-00001A (Registered in Jig material)
2
Twist the jig after inserting ASSY BOARD P-RF-MODULE(B/T module) and ASSY COVER P-MIDDLE,REAR.
Picture Description
Refer
Picture Description
Refer
3-1-3. NETWORK Description
1
Remove the NETWORK(Wi-Fi module).
NOTE Reassembly procedures are in the reverse order of disassembly procedures.
3-10
BT
CN1201
SPEAKER
CN301
CN1401_FHD
Main Board
CN201_3D
FRC+T CON
Power code
SPEAKER
SMPS
Wi-Fi
5. Wiring Diagram
5. Wiring Diagram
5-1. Wiring Diagram
Function
5-1
5. Wiring Diagram
5-2. Connector CN1401_FHD 1
NC
CN602(to HDMI2)
27
EVEN_TX0-
1
HDMI2_RX2+
11
GND
2
GND
28
GND
2
GND
12
HDMI2_RXCLK-
3
FRC_SDA
29
ODD_TX4+
3
HDMI2_RX2-
13
CEC
4
FRC_PWM1
30
ODD_TX4-
4
HDMI2_RX1+
14
ARC2_SIGLE
5
FRC_SCL
31
ODD_TX3+
5
GND
15
HDMI2_SCL_DDC
6
FRC_PWM3
32
ODD_TX3-
6
HDMI2_RX1-
16
HDMI2_SDA_DDC
7
FRC_PWM2
33
GND
7
HDMI2_RX0+
17
GND
8
TCON_SDA
34
ODD_TXCLK+
8
GND
18
HDMI2_5V
9
PANEL_I2C_EN
35
ODD_TXCLK-
9
HDMI2_RX0-
19
HDMI2_HOT_PLUG
10
BT_SYNC
36
GND
10
HDMI2_RXCLK+
11
UPDATE_CHK
37
ODD_TX2+
12
TCON_SCL
38
ODD_TX2-
13
GND
39
ODD_TX1+
14
EVEN_TX4+
40
ODD_TX1-
15
EVEN_TX4-
41
ODD_TX0+
16
EVEN_TX3+
42
ODD_TX0-
17
EVEN_TX3-
43
GND
18
GND
44
GND
19
EVEN_TXCLK-
45
GND
20
EVEN_TXCLK+
46
FRC_PWM4
21
GND
47
PANEL_13V_PW
22
EVEN_TX2+
48
PANEL_13V_PW
23
EVEN_TX2-
49
PANEL_13V_PW
24
EVEN_TX1+
50
PANEL_13V_PW
25
EVEN_TX1-
51
PANEL_13V_PW
26
EVEN_TX0+ CN601(to HDMI1)
1
HDMI1_RX2+
11
GND
2
GND
12
HDMI1_RXCLK-
3
HDMI1_RX2-
13
CEC
4
HDMI1_RX1+
14
NC
5
GND
15
HDMI1_SCL_DDC
6
HDMI1_RX1-
16
HDMI1_SDA_DDC
7
HDMI1_RX0+
17
GND
8
GND
18
HDMI1_5V
9
HDMI1_RX0-
19
HDMI1_HOT_PLUG
10
HDMI1_RXCLK+
5-2
CN603(to HDMI3) 1
HDMI3_RX2+
11
GND
2
GND
12
HDMI3_RXCLK-
3
HDMI3_RX2-
13
CEC
4
HDMI3_RX1+
14
NC
5
GND
15
HDMI3_SCL_DDC
6
HDMI3_RX1-
16
HDMI3_SDA_DDC
7
HDMI3_RX0+
17
GND
8
GND
18
HDMI3_5V
9
HDMI3_RX0-
19
HDMI3_HOT_PLUG
10
HDMI3_RXCLK+ CN604(to HDMI4)
1
HDMI4_RX2+
11
GND
2
GND
12
HDMI4_RXCLK-
3
HDMI4_RX2-
13
CEC
4
HDMI4_RX1+
14
NC
5
GND
15
HDMI4_SCL_DDC
6
HDMI4_RX1-
16
HDMI4_SDA_DDC
7
HDMI4_RX0+
17
GND
8
GND
18
HDMI4_5V
9
HDMI4_RX0-
19
HDMI4_HOT_PLUG
10
HDMI4_RXCLK+
5. Wiring Diagram CN302(to Speaker)
CN502(to Component&AV)
1
R+
3
L+
1
GND
9
COMP2_PR
2
R-
4
L-
2
COMP2_Y_CVBS
10
COMP2_PR
3
INDENT_VIEDO2
11
GND
4
GND
12
COMP2_PB
5
COMP2_PB
13
INDENT_COMP2
6
INDENT_COMP2
14
GND
7
GND
15
COMP2_Y_CVBS
8
COMP2_PR
OP301(to Optical Jack) 1
SPDIF_OUT
2
B5V_DC_PW
3
GND
CN1501(USB1) 1
B5V_USB1_PW
3
USB1_DP
2
USB1_DM
4
GND
CN1502(USB2) 1
B5V_USB2_PW
3
USB2_DP
2
USB2_DM
4
GND
CN1503(USB3) 1
B5V_USB3_PW
3
USB3_DP
2
USB3_DM
4
GND
CN304_NIRB_1~7 (to Headpune&LR OUT) 1
GND
5
TEST_SR
2
HP_LINE_SL_ OUT
6
IDENT_HP
3
HP_LINE_SR_ OUT
7
GND
4
TEST_SL
1
GND
5
TEST_SR
2
HP_LINE_SL_ OUT
6
IDENT_HP
3
HP_LINE_SR_ OUT
7
GND
4
TEST_SL
8
GND
9
IRB
12
NC
10
IRB
13
IPR_JACK_ID
11
NC
14
GND
CN303_IBR_ 1~14
CN1402_LAN 1
LAN_TXD+
5
B2.5V
2
B2.5V
6
LAN_RXD-
3
LAN_TXD-
7
NC
4
LAN_RXD+
8
GND
CN1201(to Function/IR) 1
IR
14
A5.3V
2
GND
15
LED_STB
3
GND
16
BT_WAKE
4
FRAME_SYNC_IN
17
IR_GND
5
A3.3V
18
POWER_DET
1
B5.3V_PW
11
B13V_PW
6
BT_SYNC
19
NC
7
MSCL
20
BT_RESET
2
SW_POWER_ OUT
12
ECO_ON
8
GND
21
NC
9
MSDA
22
NC
10
USB_BT_DP
23
GND
11
KEY_INPUT1
24
WIFI_DP
12
USB_BT_DM
25
WIFI_DM
13
KEY_INPUT2
26
B5V_DC_PW
CN201(to Power board)
3
B5.3V_PW
13
B13V_PW
4
A5.3V_PW
14
CPLD_PWM1
5
GND
15
GND
6
GND
16
CPLD_PWM2
7
B12VS_PW
17
OVD_ON_OFF
8
GND
18
CPLD_PWM3
9
GND
19
OVD_LEVEL
10
SW_INVERTER
20
CPLD_PWM4
5-3
5. Wiring Diagram
5-3. Connector Functions Connector
Function
CN201_3D IP CNM803
Supply main power and dimming signal from IP Board to Main Board.
CN1401_FHD FRC+T-CON
The LVDS signal transfered from Main Board to Panel.
5-4
4. Troubleshooting
4. Troubleshooting 4-1. Troubleshooting 4-1-1. Previous Check 1. Check the various cable connections first. -- Check to see if there is a burnt or damaged cable. -- Check to see if there is a disconnected or loose cable connection. -- Check to see if the cables are connected according to the connection diagram. 2. Check the power input to the Main Board. Power Board
Main Board
Power Cable LVDS Cable
Speaker 3. How to distinguish if the problem is caused by Main Board or T CON -- No Video If the problem is No Video but BLU is on and Indication LED is blinking repeatedly and faster than nomal booting, replace the T-CON board. -- Distorted Picture Check the inner patterns. • For All mode X12
FOX_FT1 FRC Post
Picture
Problem
OK
OK
NG
Main Board or Signal Source
NG
OK
NG
Main Board
NG
NG
NG
Main Board or LVDS cable or T CON or Panel
• Only for HDMI mode (additional check) HDMI
Picture
Problem
OK
NG
There is no problems after HDMI IC check HDMI source or HDMI jack.
NG
NG
There is no problems before HDMI IC check X10+ pattern or LVDS cable or T CON
4-1
4. Troubleshooting
How to check inner pattern? 1. Enter the service mode ⇢ Choose ‘SVC’ ⇢ Check the ‘internal pattern.’ 2. Enter ‘Service Mode.’ -- If you do not have Factory remote control Power OFF
MENU
1
8
2
Power On
-- If you have Factory remote control INFO
Factory
3. Choose ‘SVC ⇢ Test pattern’. Option Control Debug SVC ADC/WB Advanced 4. Check inner patterns.
4-2
Test Pattern
Mstar Test Pattern
4. Troubleshooting
4-1-2. Simple flow chart of malfunction Does the TV turn on?
Yes
No
Can you see anything on the screen? No
Yes
Can you see OSD menu running on the screen?
Yes
No Check LVDS cable connected to Main Board. If necessary, replace the Main Board.
Check the Power Cord.
Can you see Digital Channel broadcast ?
No
Yes
Replace the Main Board. Is any sound of TV when RF signal connected?
Yes
Check the LVDS Cable connected. If necessary replace the T-CON Board.
No
Change the Main Board.
No
A5V appear at the pin 4 of CN201?
No
Check 28p Cable. If necessary, replace the SMPS Board.
Yes
B13V appear at the pin 11, 12, 13 of CN201?
No
Change the Main Board.
Yes Please, contact Tech support.
4-3
4. Troubleshooting
4-2. How to Check Fault Symptom 4-2-1. NO Power Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. • The LEDs on The front panel do not work when connecting The power cord. Symptom
• The SMPS relay does not work when connecting The power cord. • The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning. In this case, check the following:
Major checkpoints
• Check the internal cable connection status inside the unit. • Check the fuses of each part. • Check the output voltage of SMPS. • Replace the Main Board. Power indicator LED is on?
No
Check the power cord connection.
Yes Check the backlight on, when 20 PIN cable unconnected ?
No
Yes Check ‘Stand-By 5V’ ? BD207 : A5.3V
No
Yes Check ‘Power input of Main Ass’y’ ? -- BD206 / BD201 : B12VS -- BD214 / 209 : B13V Diagnostics
Change 20p cable. Change Main Power Ass’y.
No
-- BD208 / BD213 : B5V Yes Check ‘Power IC output of Main Ass’y’ ? -- IC202 : A3.3V -- L202 : B1.15V / L201 : B5V
No
Change the Main Ass’y.
No
Reconnect or Change. the LVDS cable.
No
Change the T CON Board.
-- L203 : B3.3V / BD211 : B1.5V Yes Check Input power of ‘T CON Board’ ? -- F1(T CON) : B13V Yes Check Power of ‘T CON Board’. -- BD1(T CON) : Panel_12V -- B1.1V(T CON-TP) : FT1_1.1V_PW
4-4
4. Troubleshooting
Yes Diagnostics
Caution
Please, Contact tech support. Make sure to disconnect the power before working on the IP Board.
4-5
4. Troubleshooting
Location of Parts Main Board_Front B A C
D
Detail
BD214 : B13V BD209 : B13V BD211 : B1.5V A
BD206 : B12V BD201 : B12V
B BD207 : A5.3V
BD213 : B5.3V BD208 : B5.3V
L201 : B5V C
4-6
L202 : B1.15V
D
L203 : B3.3V
4. Troubleshooting
4-2-2. No Video (HDMI 1, 2, 3, 4 - Digital Signal) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom
• Audio is normal but no picture is displayed on the screen. • Check the HDMI source.
Major checkpoints
• Check the HDMI switch. • This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off. Lamp(Backlight) on, no video ?
No
Check a set in the ‘Stand-by mode’.
No
Input the HDMI signal properly.
No
Check CN601~4. Check HDMI cable. Change the Main Ass’y. or Check IC1001(X12). Change the Main Ass’y.
No
Check IC1001(X12). Change the Main Ass’y.
No
Please, Contact tech support.
Yes Check the HDMI source and check the connection of HDMI cable ? Yes Check the signal at Input of Main Board ? -- HDMI1 Clk Pin #10, #12 of CN602_H2 • DATA Pin #7, #9, #4, #6, #1, #3 of CN602_H2 -- HDMI2 Clk Pin #10, #12 of CN603_H3
1
• DATA Pin #7, #9, #4, #6, #1, #3 of CN603_H3 -- HDMI3 Clk Pin #10, #12 of CN604_H4
Diagnostics
• DATA Pin #7, #9, #4, #6, #1, #3 of CN604_H4 -- HDMI4 Clk Pin #10, #12 of CN601_H1 • DATA Pin #7, #9, #4, #6, #1, #3 of CN601_H1 Yes
2
Check the LVDS clk signal at output of Main Board. (TX) -- TX2_CLK : ODD_TXCLK_DN/DP -- TX4_CLK : EVEN_TXCLK_DN/DP Yes Check the LVDS cable? Replace the T CON / LCD panel?
Caution
Make sure to disconnect the power before working on the IP Board.
4-7
4. Troubleshooting
Location of Parts Main Board_Front
A B
Detail CN604_H4 : HDMI3 CN603_H3 : HDMI2 A
B CN602_H2 : HDMI1
4-8
CN601_H1 : HDMI4
4. Troubleshooting
Waveforms 1 HDMI input (RX_Data, RX_Clk)
2 LVDS output
4-9
4. Troubleshooting
4-2-3. No Video (Tuner_CVBS) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom
• Audio is normal but no picture is displayed on the screen. • Check the Tuner CVBS source.
Major checkpoints
• Check the Tuner. • This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off. Lamp(Backlight) on, no video ?
No
Check a set in the ‘Stand-by mode’.
No
Input the RF source properly.
No
Change the Main Ass’y.
No
Check IC1001(X12). Change the Main Ass’y.
No
Check IC1001(X12). Change the Main Ass’y.
No
Please, Contact tech support.
Yes Check the RF source and check the connection of RF cable. Yes
1
Check the Power of Tuner ? -- Pin #4 of Tuner : B3.3V_Tuner -- Pin #1 of Tuner : B1.8V_Tuner Yes
Diagnostics
2
Check the CVBS data out of IC1001 ? C807 : Tuner CVBS Yes
2
Check the LVDS clk signal at output of Main board. (TX) -- TX2_CLK : ODD_TXCLK_DN/DP -- TX4_CLK : EVEN_TXCLK_DN/DP Yes Check the LVDS cable? Replace the T CON / LCD panel?
Caution
4-10
Make sure to disconnect the power before working on the IP Board.
4. Troubleshooting
Location of Parts Main Board_Front B
C
A
Detail
A
B Pin #4 : B3.3V C807 Pin #1 : B1.8V
C
4-11
4. Troubleshooting
Waveforms 1 CVBS OUT (Grey Bar)
4-12
2 LVDS output
4. Troubleshooting
4-2-4. No Vido (Tuner DTV) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom
• Audio is normal but no picture is displayed on the screen. • Check the DTV source.
Major checkpoints
• Check the Tuner. • This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off. Lamp(Backlight) on, no video ?
No
Check a set in the ‘Stand-by mode’.
No
Input the RF source properly.
No
Check the D-TV source.
No
Change the Main Ass’y.
No
Check IC1001(X12) Change the Main Ass’y.
No
Please, Contact tech support.
Yes Check the RF source and check the connection of RF cable. Yes
1
Check the ‘signal strength’ in Self Diagnosis menu Strength is enough ? Yes
Diagnostics
2
Check the Power of Tuner ? -- Pin #4 of Tuner : B3.3V_Tuner -- Pin #1 of Tuner : B1.8V_Tuner Yes
2
Check the LVDS clk signal at output of Main board. (TX) -- TX2_CLK : ODD_TXCLK_DN/DP -- TX4_CLK : EVEN_TXCLK_DN/DP Yes Check the LVDS cable? Replace the T CON / LCD panel?
Caution
Make sure to disconnect the power before working on the IP Board.
4-13
4. Troubleshooting
Location of Parts Main Board_Front
B
A
Detail
A
B Pin #4 : B3.3V
Pin #1 : B1.8V
4-14
4. Troubleshooting
Waveforms 1 CVBS OUT (Grey Bar)
2 CH_CLK, CH_VALID
2 CH_CLK, CH_VALID
4-15
4. Troubleshooting
4-2-5. No Video (Video AV) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom Major checkpoints
• Audio is normal but no picture is displayed on the screen. • Check the Video CVBS source. • This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off. Lamp(Backlight) on, no video ?
No
Check a set in the ‘Stand-by mode’.
No
Input the video source properly.
No
Check IC1001(X12) Change the Main Ass’y.
No
Please, Contact tech support.
Yes Check the video source and check the connection of video cable? Yes Diagnostics
2
Check the LVDS clk signal at output of Main board. (TX) -- TX2_CLK : ODD_TXCLK_DN/DP -- TX4_CLK : EVEN_TXCLK_DN/DP Yes Check the LVDS cable? Replace the T CON / LCD panel?
Caution
4-16
Make sure to disconnect the power before working on the IP Board.
4. Troubleshooting
Location of Parts Main Board_Front A
B
Detail
A
R816 : COMP2_Y_CVBS
B
4-17
4. Troubleshooting
Waveforms 1 CVBS OUT (Grey Bar)
4-18
2 LVDS output
4. Troubleshooting
4-2-6. No Video (COMPONENT) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom Major checkpoints
• Audio is normal but no picture is displayed on the screen. • Check the Component source • This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off. Lamp(Backlight) on, no video ?
No
Check a set in the ‘Stand-by mode’.
No
Input the component source properly.
No
Check CN502. Change the Main Ass’y.
No
Check IC1001(X12). Change the Main Ass’y.
No
Please, Contact tech support.
Yes Check the component source and check the connection of component cables ? Y, Pb, Pr Yes
Diagnostics
1
Does the component data appear at ? -- COMP2_Y_CVBS : R816 -- Pb : R817 -- Pr : R815 Yes
2
Check the LVDS clk signal at output of Main Board. (TX) -- TX2_CLK : ODD_TXCLK_DN/DP -- TX4_CLK : EVEN_TXCLK_DN/DP Yes Check the LVDS cable? Replace the T CON / LCD panel?
Caution
Make sure to disconnect the power before working on the IP Board.
4-19
4. Troubleshooting
Location of Parts Main Board_Front A
B
Detail
A
4-20
R817 : COMP2_PB R816 : COMP2_Y_CVBS R815 : COMP2_PR
B
4. Troubleshooting
Waveforms 1 Compnent_Y (Gray scale) / Pb / Pr (Color bar)
1 Compnent_Y (Gray scale) / Pb / Pr (Color bar)
2 LVDS output
4-21
4. Troubleshooting
4-2-7. No Sound (1.Speaker 2.Monitor_out 3.Optical) Note Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned. Symptom Major checkpoints
• Video is normal but there is no sound. • When the speaker connectors are disconnected or damaged. • When the sound processing part of the Main Board is not functioning. • Speaker defect. Check the source and check the connection of sound cable ? COMP
No
Input the sound source properly.
No
Check CN502. Change the Main Ass’y.
No
Check IC301. Change the Main Ass’y.
No
Change the Main Ass’y.
No
Please, Contact Tech support.
Yes Check the signal at input of Main Board? AV, COMP L/R : RA503 Yes Check the DATA between the Audio IC’s ? -- Pin #15 of IC301 : B clk
1
-- Pin #20 of IC301 : LR clk -- Pin #23, #24 of IC301 : I2C_SDA/ SCL
Diagnostics
Yes 1. Check the Speaker sound data at ? -- CN302 2. Check the Monitor out sound data at ?
2
-- CN303_IBR 3. Does the SODIF OUT sound data appear at ? -- OP301 Yes Replace speaker ?
Caution
4-22
Make sure to disconnect the power before working on the IP Board.
4. Troubleshooting
Location of Parts Main Board_Front
C
D
A B
Detail
RA503 : COMP_L/R A
Pin #20 : LR clk
Pin #15 : B clk
B Pin #23, #24 : I2C_SDA/SCL
OP301 : Optical CN303_IBR Monitor out_Sound C
D
4-23
4. Troubleshooting
Location of Parts Main Board_Front
E
Detail
E CN302 : SPK
4-24
4. Troubleshooting
Waveforms 1 MCLK / LRCLK / PCM_I2C_DATA
1 MCLK / LRCLK / PCM_I2C_DATA
2 Speaker / Monitor OUT , SPDIF OUT
2 Speaker / Monitor OUT , SPDIF OUT
4-25
4. Troubleshooting
4-3. Factory Mode Adjustments 4-3-1. Detail Factory Option NOTE If you replace the main board with new one, please change the factory option as well. The options you must change are "Type".
UE**F6400AWXXH Inches
PANEL
SMPS Board
MAIN Board
32"
40"
46"
55"
Vendor
SDC
SDC
SDC
SDC
Code
BN95-00885A
BN95-00889A
BN95-00893A
BN95-00895A
Spec.
CY-HF320CSLV1H/V
CY-HF400CSLV1H/V
CY-HF460CSLV1H/V
CY-HF550CSLV1H/V
Vendor
SEM
HANSOE
HANSOE
SEM
Code
BN44-00620A
BN44-00622B
BN44-00623B
BN44-00625A
Spec.
L32X1QP_DSM
L42X1Q_DHS
L46X1Q_DHS
L55X1Q_DSM
Chassis Ass'y
BN91-10304Y
BN91-10304Z
BN91-10329A
BN91-10329B
PBA Ass'y
BN94-06715Z
BN94-06717A
BN94-06717B
BN94-06717D
Byte
Item
0
Factory Reset
-
-
-
-
1
Type
32A1AF0S
40A1AF0S
46A1AF0S
55A1AF0S
2
Local set
EU
EU
EU
EU
3
SW Model
F6400
F6400
F6400
F6400
4
BOM Model
6400
6400
6400
6400
5
Tuner
TC
TC
TC
TC
6
Ch table
NONE
NONE
NONE
NONE
4-26
4. Troubleshooting Inches
50"
65"
75"
Vendor
AUO
SDC
SDC
Code
BN07-01279A
BN95-00879A
BN95-00886A
Spec.
-
CY-HF650CSAV1H/V
CY-GF750CSLV1V
Vendor
DYREL
HANSOE
HANSOE
Code
BN44-00624A
BN44-00627A
BN44-00621A
Spec.
L50X1Q_DDY
L65X1Q_DHS
L75X1Q_DHS
Chassis Ass'y
BN91-10505N
BN91-10505P
BN91-10505Q
PBA Ass'y
BN94-06717C
BN94-06717E
BN94-06717F
PANEL
SMPS Board
MAIN Board Byte
Item
0
Factory Reset
-
-
-
1
Type
50R1AF0S
65L1AF0S
75A1UF0S
2
Local set
EU
EU
EU
3
SW Model
F6400
F6400
F6400
4
BOM Model
6400
6400
6400
5
Tuner
TC
TC
TC
6
Ch table
NONE
NONE
NONE
4-27
4. Troubleshooting
4-3-2. Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : • If you do not have Factory remote control Power OFF
INFO
MENU
MUTE
Power On
• If you have Factory remote control INFO
Factory
-- Buttons operations within Service Mode Menu
Full Menu Display / Move to Parent Menu
Direction Keys ▲/▼
Item Selection by Moving the Cursor
Direction Keys ◄/►
Data Increase / Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit
HOW to enter the Advanced menu (Picture) 1 Cursor move to ‘Advanced’. → 2 Push the ‘0’ button 4 times. → 3 You can see the ‘Picture’ menu. • If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu) Option Control Debug SVC ADC/WB Advanced
T-MST12DEUC-xxxx T-MST12DEUS-xxxx BT Version : xxxx E-Manual : xxxx Camera Version : xxxx Blaster-version : ---EDID SUCCESS CALIB : AV/COMP/PC/HDMI/ Option : xxxx,UE,6400,NONE USB RS232C : OFF SDAL-X12-MAIN-xxxx-xxxx RFS : "X12 0071" KER/201x-xx-xx KERNEL : 8.0837, D / Onboot :xxxx.x Backend IC[x], Data Ver : xxxx TCON Version : xxxx DTP-DTVTD-xxxx Model : UE46F6400 Wired MAC SUCCESS Wireless MAC SUCCESS DRM : Crt O, Nf O, Wv O, Hc O, Dc O, Mx O, MI O Factory Data Ver : 97 EERC Version : 51 DTP-BP-HAL-3183 DTP-AP-CNC-3151 DTP-AP-MM-3145 DTP-AP-WP-3148 DTP-BP-MW-3156 DTP-BP-APP-3156 POP-FLA-13-TEMP Date of purchase : mm/dd/yyyy
4-28
4. Troubleshooting
4-3-3. Factory Data Option Factory Menu Name
Data
Factory Reset
-
Type
32A1AF0S 40A1AF0S 46A1AF0S 55A1AF0S 50R1AF0S 65L1AF0S 75A1UF0S
Range
Local Set SW Model BOM Model TUNER Ch Table
NONE
MRT Option Front Color LVDS FORMAT
JEIDA
Language_Arabic
US
Region
USA
PnP Language
ENG_US
WIFI REGION
S
OTN Support
ON
OTA Support
OFF
TTX
OFF
China HD
OFF
NT Conversion
OFF
Num of DTV
1
Num of AV
1
Num of COMP
1
Num of HDMI
4
Num of SCART
0
Num of USB Port
3
Num of HeadPhone
0
Num of RVU
1
Num of Display
2
Num of IPTV
0
Num of RUI
0
Num of PVR RECORD
0
4-29
4. Troubleshooting Factory Menu Name
Data
TOOLS Support
40
LNA Support
OFF
24Px4 Support
OFF
BD Wise Support
ON
Data Service Support
OFF
PVR Support
OFF
CI Support
OFF
LEDMotionPlus Support
ON
Natural Mode Support
ON
Relax Mode Support
OFF
HDMI/DVI SEL
4
Select LCD/PDP
LCD
Wall Mount
OFF
HV Flip
HV Flip / H Filp / OFF
Light Effect
OFF
e-Pop Default
1
CAMERA Support
OFF
NETWORK Support
3
EcoSensor Support
ON
3D Support
ON
BT Support
ON
BT ADDRESS
Engineer Option Auto Power
MEMORY
Type Of PANEL KEY
None
5 Way Function Key
R BACK
Contents Bar
OFF
Cable Modulation
QAM
Standby led on/off
OFF
Recognition Support IF AGC
0
D AGC
0
PH BW
0
FQ BW
0
PH RATE
0
PD EN
0
PEQ Inx
0
4-30
Range
4. Troubleshooting Factory Menu Name
Data
Range
WF Scale WF Type
0
Nu of Network Stream
1
DP V Size
0
Backend Device
FOX-FT1
BT_AUDIO_ON_OFF
OFF
Config_AV_PATH ECO Standby
OFF
Fast Logo Delay
0
Num of PANEL KEY
6
Control Factory Menu Name
Data
Range
EDID EDID ON/OFF
OFF
EDID WRITE ALL
…
EDID WRITE HDMI
…
EDID Ver
…
EDID Port
Sub Option RS-232 Jack
UART
Watchdog
OFF
Checksum
0x0000
Fast Boot in Production
OFF
USB Serial
OFF
Debug/UART
Eeprom Reset ECO IC TYPE
NONE
Info Link Server Type
development
Info Link Country
None
TTX Group
-
Visual Test
-
MediaPlayDB
-
OPTION_SWU OTN Server Type
operating
OTN Test Server
OFF
SWU Reset SWU Duration
OFF
4-31
4. Troubleshooting Factory Menu Name SWU Fail Test
Data OFF
OPTION_NUM Num of ATV
1
Num of SVIDEO
0
Num of PC
0
Num of DVI
0
Num of OPTICAL Link
1
Num of MEDIA
1
Num of Tuner
1
Num of ISP
1
RF Remocon Support
OFF
CDD mode
-
DPMS Support
OFF
Num of IPTV CIP
0
Num of CI
0
Num of DECODER
0
T-CON Device BOARD CONTROL
OFF
HP LINE
LineOut
RM Server Type
Operating
RTS Mode
OFF
PSA FKP Download1
0
FKP Download2
0
LMK threshold
3
Low threshold
10
High threshold
15
CSB
ON
CLB
ON
PDP Option Pixel Shift Test
OFF
Logic SW
0
Panel Temperature
0
LOGIC Waveform Day
0
Logic CheckSum
0
MRT
0
4-32
Range
4. Troubleshooting Factory Menu Name
Data
Range
SAPC Timer APC Speed
Hotel Option Hospitality Mode
OFF
Power On
…
Menu OSD
…
Operation
…
Music Mode
…
External Source
…
Eco Solution
…
Cloning
…
Shop Option Shop Mode
OFF
Exhibition Mode
OFF
3D Cube
OFF
Asia Option Unbalance
OFF
AF Level adjust
3
TX Power Level
0
Mono Last Memory
OFF
H Shaking
OFF
SOUND Carrier_Mute
OFF
High Devi
OFF
Speaker Delay Normal
0x6Eh
SPDIF PCM Gain
-9dB
FM M Prescale
0x30h
FM Prescale
0x00h
AM Prescale
0x32h
NICAM Prescale
0x48h
BTSC Mono Prescale
0x19h
BTSC stereo Prescale
0x2Fh
BTSC SAP Prescale
0x2Bh
A2Ident High THID
31
A2Ident Low THID
0
Pilot Level High Thld
0x28h
Pilot Level Low Thld
0x10h
4-33
4. Troubleshooting Factory Menu Name
Data
Carrier2 Amp High THID
4
Carrier2 Amp Low THID
3
Carrier2 SNR High THR
16
Carrier2 SNR Low THR
80
Sig Error On
35
Sig Error Off
41
Amp Model
TAS5745
Amp Volume
0xcbh
Amp Scale
0x35h
Amp Check Sum
0x000821B2
Woofer Type
0
Woofer Scale
0
Woofer Check Sum
0x8ah
Woofer Local EQ Checksum
0
Speaker EQ
ON
PEQ Test
Ready
Local Speaker EQ
0
Local EQ Checksum
0
Speaker cut-off Ferq
4
Range
Audio-IP Test SRS Tuning Parm
0
TruBass-CheckSum
0
Mic Scale
0
Subwoofer Support
0
India Sound
OFF
AudioDock BT delay
50
Wall Filter Type
0
Wiselink Delay Menu
90
Debug Factory Menu Name
Data
Spread Spectrum LVDS Spread
ON
DDR Spread
1.0% Spectrum
Period
30K
Amplitude
1
HD SSC ON/Off
ON
4-34
Range
4. Troubleshooting Factory Menu Name
Data
HD SSC Value
1
LVDS SSC ON/Off
ON
LVDS SSC Value
0
DDR SSC ON/Off
ON
DDR SSC Value
1
FRC LVDS SSC ON/OFF
ON
FRC LVDS SSC MRR
10
FRC LVDS SSC MFR
1
FRC LVDS SSC Period
1
FRC LVDS SSC Modulation
1
FRC DDR SSC ON/OFF
ON
FRC DDR SSC MRR
15
FRC DDR SSC MFR
1
FRC DDR SSC Period
1
FRC DDR SSC Modulation
1
Range
DDR Margin A CTRL_OFFSET_0_3
0x0
A CTRL_OFFSET_D
0x0
B CTRL_OFFSET_0_3
0x0
B CTRL_OFFSET_D
0x0
ND ADJ Support
OFF
MICOM POWER OFF
OFF
RF Mute Time
6ms
CI+1.3
OFF
FRC FRC FDISPLAY ON/OFF
0
3D FDISPLAY ON/OFF
OFF
PC Mode ON/OFF
OFF
Tuner Margin
10
MPEG Margin
1000
H.264 Margin
8
CAM Wait Time TS Clock deldy
0
TCON_TEMP READ
0
TEMP LAST
60
DCC VERSION
0x0
DCC CHK SEL
0
4-35
4. Troubleshooting Factory Menu Name
Data
DCC CHECK LOCAL
0x0
DCC CHECK TOTAL
0x0
MulitACC Checksum
0
IIC Bus stop
OFF
Tuner Status DVB SNR BER Signal Strength Bandwidth Frequency LNA Status FFT Modulation Code Rate GI Hier Modulation Frequency offset Timing offset AGC UCB PLL Type DEMOD Type TPS Lock RS Lock SSI SQI Firmware Version ISDB-T FFT Size_1 Guard Interval_1 Freq. Offset_1 SNR_1 IF AGC_1 TMCC Lock_1 TS Packer_1 Master Lock_1
4-36
Range
4. Troubleshooting Factory Menu Name
Data
Range
Data
Range
A_Modulation_1 A_Code Rate_1 A_Timer InterLeave_1 A_Segments Num_1 A_BER_1 B_Modulation_1 B_Code Rate_1 B_Timer InterLeave_1 B_Segments Num_1 B_BER_1 C_Modulation_1 C_Code Rate_1 C_Timer InterLeave_1 C_Segments Num_1 C_BER_1
SVC Factory Menu Name Test Pattern Pattern Sel
OFF
Logic Pattern Sel
…
Logic Level Sel
…
FRC Pre Test Pattern
0
FRC Post Test Pattern
0
FRC3D Fdisplay
OFF
FRC3D PC Mode
OFF
SOC TCON Test Pattern
0
SOC TCON Pattern Level
255
SOC TCON FRC Pattern
0
HDMI WB Pattern
OFF
HDMI Pattern Sel
0
Parma Pre Test Pattern
0
Parma Post Test Pattern
0
Panel Display Time
0Hr
SVC Info
0
Delete S/N
0
Upgrade
4-37
4. Troubleshooting Factory Menu Name
Data
T-CON Usb Download
Failute
T-CON CheckSum
Error
Logic Usb D/L
…
SUBMICOM UPGRADE
Failute
BT UPGRADE BT FREEPAIRING
ON
Function Upgrade
Failute
FRC3D FW Upgrade Camera Upgrade Mic Upgrade CPLD USB Download JP MICOM UPGRADE
Failute
DP MICOM UPGRADE
Failute
Jump Upgrade
Failute
Smart Hub Reset
0
ER Count WD Count
0
AR Count
0
WIFI ER Count
0
BT ER Count
0
HDMI Err Cnt
0
Camera ER Count
0
LOG(View Log) Select Log Type
NVRAM
Log View
0
Delete Log Debug Log Down Emergency Log Copy
Self Diagnosis Loop Back LAN Test AV Audio Test DVIN Audio Test CVBS Test COMP Test USB HUB Test HDMI Test
4-38
Range
4. Troubleshooting Factory Menu Name
Data
Range
SCART Audio Test SCART CVBS Test SCART RGB Test CPU DDR FLASH EEPROM Sound AMP HDMI Switch IC USB HUB IC WIFI LVDS T-CON/FRC PCB Test MOIP App Self Test Device self Test Voltage EcoSensor BT EXT Sound Inspection Woofer Sound Inspection
NONE
ATV CH Inspection DTV CH Inspection Satellite CH Inspection
IPERF
Stopped
OPTION HDMI Expert DVB CI CAL Data Backup
…
CAL Data Restore
…
ADC/WB Factory Menu Name
Data
Range
ADC AV Calibration
Success
Comp Calibraion
Success
4-39
4. Troubleshooting Factory Menu Name
Data
PC Calibration
Success
HDMI Calibration
Success
ADC Result 1st_Y_GH
258
1st_Y_GL
128
1st_Cb_BH
…
1st_Cb_BL
…
1st_Cr_RH
…
1st_Cr_RL
…
2nd_R_L
132
2nd_G_L
132
2nd_B_L
132
2nd_R_H
70
2nd_G_H
70
2nd_B_H
70
White Balance R-Offset
128
G-Offset
128
B-Offset
128
R-Gain
128
G-Gain
128
B-Gain
128
WB_W2_R_Offset
128
WB_W2_B_Offset
128
WB_W2_R_Gain
164
WB_W2_B_Gain
63
WB_N_R_Offset
128
WB_N_B_Offset
128
WB_N_R_Gain
151
WB_N_B_Gain
108
MGA MGA On/Off
4-40
OFF
R1_Gain
…
B1_Gain
…
G1_Gain
…
R2_Gain
…
B2_Gain
…
Range
4. Troubleshooting Factory Menu Name
Data
G2_Gain
…
R3_Gain
…
B3_Gain
…
G3_Gain
…
R4_Gain
…
B4_Gain
…
G4_Gain
…
R5_Gain
…
B5_Gain
…
G5_Gain
…
R6_Gain
…
B6_Gain
…
G6_Gain
…
R7_Gain
…
B7_Gain
…
G7_Gain
…
R8_Gain
…
B8_Gain
…
G8_Gain
…
R9_Gain
…
B9_Gain
…
G9_Gain
…
R10_Gain
…
B10_Gain
…
G10_Gain
…
Range
4-41
4. Troubleshooting
4-4. White Balance 4-4-1. Calibration 1. Into the Factory Mode. 2. Select ADC/WB menu. 3. Select ADC menu. AV Calibration
Option
Comp Calibration
Control
HDMI Calibration
Debug SVC ADC/WB Advanced
4-4-2. Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance.
Color Calibration • Adjust Specification Source
Setting Mode
Pattern
Use Equipment
HDMI
1280 x 720@60 Hz
Pattern #24 (Chess Pattern)
CA210 & Master MSPG925 Generator
(Chess Pattern)
-- Use other equipment only after comparing the result with that of the Master equipment. Input mode
4-42
Calibration
Pattern
CVBS IN (Model_#1)
Perform in NTSC B&W Pattern #24
Lattice
Component IN (Model_#6)
Perform in 720p B&W Pattern #24
Lattice
HDMI IN
Perform in 720p B&W Pattern #24
Lattice
4. Troubleshooting Method of Color Calibration (AV) 1. Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port. 2. Press the Source key to switch to “AV1” mode. 3. Enter Service mode. 4. Select the “ADC” menu. 5. Select the “AV Calibration” menu. 6. In “AV Calibration Off” status, press the “► ” key to perform Calibration. 7. When Calibration is complete, it returns to the high-level menu. 8. You can see the change of the “AV Calibration” status from Failure to Success. Method of Color Calibration (Component) 1. Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port. 2. Press the Source key to switch to “Component1” mode. 3. Enter Service mode. 4. Select the “ADC” menu. 5. Select the “Comp Calibration” menu. 6. In “Comp Calibration Off” status, press the “ ►” key to perform Calibration. 7. When Calibration is complete, it returns to the high-level menu. 8. You can see the change of the “Comp Calibration” status from Failure to Success. Method of Color Calibration (HDMI) 1. Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port. 2. Press the Source key to switch to “HDMI1” mode. 3. Enter Service mode. 4. Select the “ADC” menu. 5. Select the “HDMI Calibration” menu. 6. In “HDMI Calibration Off” status, press the “►” key to perform Calibration. 7. When Calibration is complete, it returns to the high-level menu. 8. You can see the change of the “HDMI Calibration” status from Failure to Success.
4-4-3. Adjustment 9. Into the Factory Mode. 10. Select ADC/WB menu. 11. Select White Balance menu. Option Control Debug SVC ADC/WB Advanced
White Balance
(Low Light)
(Hight Light)
Sub Brightness
Sub Contrast
R offset
R gain
G offset
G gain
B offset
B gain
4-43
4. Troubleshooting
4-5. RS-232C • RS232C Control -- Port : COM#(Serial) -- Bit rate : 115200 -- Data Bit : 8 bit -- Parity : None -- Stop Bits : 1 -- Flow Control : None
• Description of RS232C
4-44
Pin#
Name
Full Name
Pin#
Name
Full Name
Pin#
Name
Full Name
1
CD
Carrier Detect
4
DTR
Data Terminal Ready
7
RTS
Request To Send
2
RxD
Received Data
5
GND
Signal Ground
8
CTS
Clear To Send
3
TxD
Transmitted Data
6
DSR
Data Set Ready
9
RI
Ring Indicator
4. Troubleshooting
4-6. AV Control Tabe General
Power
Volume
Control Item
Cmd1
Cmd2
Cmd3
Value
Power
0x00
0x00
0x00
0x00
Off
0x01
On
0x02
Direct
0x01
0x00
(0~100)
Up
0x01
0x00
Down
0x02
0x00
0x00
0x00
Mute
0x02 Ch.
Direct Up Down
Control Item Source List
TV
TV
AV
AV1
S-Video
Component
PC
HDMI
DVI
Control Item PICTURE
Mode
Dynamic(Entertain)
0x00
0x04
Continuous
Input
0x00
0x01
0x00
0x02
0x00
Cmd2
Cmd3
Value
0x00
0x00
0x00
0x01
0x00
0x03
0x00
Cmd1 0x0a
AV2
0x01
AV3
0x02
S-Video1
0x02
0x00
S-Video2
0x01
S-Video3
0x02
Component1
0x03
0x00
Component2
0x01
Component3
0x02
PC1
0x04
0x00
PC2
0x01
PC3
0x02
HDMI1
0x05
0x00
HDMI2
0x01
HDMI3
0x02
HDMI4
0x03
DVI1
0x06
0x00
DVI2
0x01
DVI3
0x02
Cmd1
Cmd2
Cmd3
Value
0x0b
0x00
0x00
0x00
Standard
0x01
Movie
0x02
Natural
0x03
4-45
4. Troubleshooting Control Item PICTURE
Mode
Cmd1
Cmd2
Cmd3
CAL-NIGHT
0x04
CAL-DAY
0x05
BD Wise
0x06
Relax
0x07
BackLight (CellLight)
0~20
0x01
0x00
(0~20)
Contrast
0~100
0x02
0x00
(0~100)
Brightness
0~100
0x03
0x00
(0~100)
Sharpness
0~100
0x04
0x00
(0~100)
Color
0~10
0x05
0x00
(0~100)
0x06
0x00
(0~100)
0x07
0x00
0x00
Tint
G/R
Advanced Settings
Black Tone
Dynamic Contrast
Off Dark
0x01
Darker
0x02
Darkest
0x03
Off
0x01
0x00
Low
0x01
Medium
0x02
HIgh
0x03
Shadow Detail
-2 ~ 2
0x02
(-2~2)
Gamma
-3 ~ 3
0x03
(-3~3)
RGB Only Mode
Off
0x05
0x00
Color Space
4-46
Value
Red
0x01
Green
0x02
Blue
0x03
Auto
0x06
0x00
Native
0x01
Custom
0x02
White Balance
R-Offset(LCD)
0x07
(0~50)
White Balance
G-Offset(LCD)
0x08
(0~50)
White Balance
B-Offset(LCD)
0x09
(0~50)
White Balance
R-Gain(LCD)
0x0a
(0~50)
White Balance
G-Gain(LCD)
0x0b
(0~50)
White Balance
B-Gain(LCD)
0x0c
(0~50)
White Balance
Reset(LCD)
0x0d
0x00
Flesh Tone
-15 ~ 15
0x0e
(-15~15)
Edge Enhancement
Off
0x0f
0x00
New function of 12" (only PDP TV)
4. Troubleshooting Control Item PICTURE
Cmd1
Cmd2
Cmd3
On xvYCC
0x01
Off
0x10
On Motion Lighting
Off
Picture Option
Color Tone
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Off
0x11
Auto Motion Plus
0x00 0x01
0x0a
0x07
0x00
On(Normal)
0x01
Cinema
0x02
Ticker
0x03
Cool
0x0a
0x00
0x00
Standard
0x01
Warm1
0x02
Warm2
0x03
Off
0x02
0x01
Medium
0x02
High
0x03
Auto
0x04
Auto Visualization
0x05
Off
0x03
0x00
Low
0x01
Medium
0x02
High
0x03
Auto
0x04
Normal
0x04
Off
0x00 0x01
0x05
0x00
Auto1
0x01
Auto2
0x02
Cinema Smooth
0x03
Off
Change Normal → Standard mode
0x00
Low
Low Film Mode
0x00 0x01
On LED Motion Plus
Value
0x06
New function of 12" (only PDP TV)
0x00
Clear
0x01
Standard
0x02
Smooth
0x03
Custom
0x04
4-47
4. Troubleshooting Control Item PICTURE
Cmd1
Cmd2
Cmd3
Demo Screen Adjustment
Picture Size
Reset Picture
Reset Picture
3D
3D Mode
3D ⇢ 2D
16:9
0x05 0x0b
0x0a
0x01
0x01
Zoom2
0x02
Wide Fit
0x03
4:3
0x04
Screen Fit
0x05
Smart View I
0x06
Smart View II
0x07
Auto Wide
0x08
Wide Zoom
0x09
Zoom
0x0a
Off
0x0b
0x0b
0x00
0x00
0x0b
0x0c
0x00
0x00
2D ⇢ 3D
0x01
Side By Side
0x02
Top Bottom
0x03
Line By Line
0x04
Vertical Line
0x05
Checker BD
0x06
Frame Sequence
0x07
Off
0x01
0x01 0x02
(-5~5)
Depth
0x03
(1~10)
0x05
0x00
Control Item
4-48
0x00
3D View Point
3D Auto View
Sound Mode
0x00
Zoom1
On
Sound
Value
Standard
Off Message Notice
0x01
On
0x02
Cmd1
Cmd2
Cmd3
Value
0x0c
0x00
0x00
0x00
Music
0x01
Movie
0x02
Clear Voice
0x03
Amplify
0x04
New function of 12" (only DVB TV)
4. Troubleshooting Control Item Sound
Equalizer
Cmd2
Cmd3
Value
0x01
0x00
(0~20)
100hz
0x01
(0~20)
300hz
0x02
(0~20)
1khz
0x03
(0~20)
3khz
0x04
(0~20)
10khz
0x05
(0~20)
Reset
0x06
0x00
0x00
0x00
Balance
SRS TruSurround HD (echo)
Off
Virtual Surrond (echo)
On
SRS TruDialog (echo)
Off
Dialog Clarify (X9)
On
Preferred Language
English
Multi-Track Sound
Auto Volume
Speaker Select
Cmd1
0x02
0x01
0x03
0x00
0x01 0x04
0x00
0x00
Spanish
0x01
French
0x02
Korean
0x03
Japanese
0x04
Mono
0x05
0x00
0x00
Stereo
0x01
SAP
0x02
Off
0x06
0x00
0x00
ON
0x01
Night
0x02
TV Speaker
0x07
0x00
External Speaker Sound Select
0x00
Main
0x01 0x08
0x00
Sub Sound Reset
Sound Reset
3D Audio
Off
0x00
0x00 0x01
0x09
0x00
0x00
0x0a
0x00
0x00
Low
0x01
Medium
0x02
High
0x03
New function of 12"
4-49
4. Troubleshooting Control Item KEY
Key Generation
OSD
Show/Hide Control
Get Status
4-50
Show
Cmd1
Cmd2
Cmd3
Value
0x0d
0x00
0x00
refer to table
0x0e
0x00
0x00
0x00
Hide
0x01
Power (On/Off)
0xf0
0x00
0x00
0x00
Volume(0~100)
0xf0
0x01
0x00
0x00
Mute (On/Off)
0xf0
0x02
0x00
0x00
Channel Number
0xf0
0x03
0x00
0x00
Source (TV/AV/…/HDMI/…)
0xf0
0x04
0x00
0x00
Picture Size
0xf0
0x05
0x00
0x00
3D (On/Off)
0xf0
0x06
0x00
0x00
Picture Mode
0xf0
0x07
0x00
0x00
Sound Mode
0xf0
0x08
0x00
0x00
Key value
Value
Up
96 (0x60)
Down
97 (0x61)
Left
101 (0x65)
Right
98 (0x62)
Menu
26 (0x1A)
Internet
147 (0x93)
Enter(OK)
104 (0x68)
EXIT
45 (0x2D)
New function of 12"
4. Troubleshooting
4-7. Software Upgrade Software Upgrade can be performed by downloading the. latest firmware from samsung.com to a USB memory device. • Current Version - The software already installed in the TV. Software is represented as ‘Year/Month/Day_Version’.
4-7-1. How to Check the Software Version Use the Main Menu 1. Click the "MENU" key in remote controller. 2. Select "Support" menu. 3. Locate the menu cursor "Software Upgrade" menu. 4. Click the "INFO" key. -- Check the Main SW and Micom version.
Use the Factory Mode Option Control Debug SVC ADC/WB Advanced
T-MST12DEUC-xxxx T-MST12DEUS-xxxx BT Version : xxxx E-Manual : xxxx Camera Version : xxxx Blaster-version : ---EDID SUCCESS CALIB : AV/COMP/PC/HDMI/ Option : xxxx,UE,6400,NONE USB RS232C : OFF SDAL-X12-MAIN-xxxx-xxxx RFS : "X12 0071" KER/201x-xx-xx KERNEL : 8.0837, D / Onboot :xxxx.x Backend IC[x], Data Ver : xxxx TCON Version : xxxx DTP-DTVTD-xxxx
4-51
4. Troubleshooting
4-7-2. How to Upgade Software 1. Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. NOTE Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. 2. The TV will turn off and turn on automatically after completing the firmware upgrade. 3. Please check the firmware version after the upgrades are complete. -- the new version will have a higher number than the older version. NOTE • When software is upgraded, video and audio settings you have made will return to their default (factory) settings. • We recommend you write down your settings before beginning firmware update. 4. After update is completed, restore your previous settings.
Main Software Upgrade Store the sw program named "T-MST12UABC" in USB memory stick.
Click the "MENU" key in Remote Controller.
Select "Support - Software Update - Update Now" menu.
Click the "ENTER" key. • Wait for upgrade complete. • Check the Software Version.
4-52
4. Troubleshooting
Sub Software Upgrade USB Download 1. After Main Software upgrade, Enter the Factory menu by below method. -- Factory Remocon • Click the Remocon button continuedly. (Info key+ Factory key) Info
Factory
-- Nomal Remocon • 1 Turn off the TV. Info
2 Click the Remocon button continuedly. Menu
Mute
Power
2. Select the “SVC”. Option Control SVC Expert ADC/WB Advanced 3. Select the “SUBMICOM UPGARADE”. Test pattern Panel Display Time
DCC CHK SEL 1Hr
Tuner Status T-CON Usb Download
DCC CHECK LOCAL
0 0x0
DCC CHECK TOTAL Failure
Fuction Upgrade
off
Error
Smart Hub Reset
off
Tuner Margin
10
WIFI ER COUNT
0
TS Clock delay
0
BT ER COUNT
0
T-CON CheckSum
SUBMICOM UPGRADE BT ADDRESS
off 0000
BT UPGRADE BT FREEPAIRING
Debug Log Down MulitACC Checksum
Errow
SVC Info ON
SVC Reset
TS Clock delay TC
0
TS Clock delay S
0
TCON_TEMP READ
0.00
CAL Data Backup
....
TEMP LAST
60.00
CAL Data Restore
....
DCC VERSION
0x0
4. Click the “→” remocon key. SUBMICOM UPGRADE
Wait
-- Wait for upgrade complete. -- Check the Software version.
4-53