Engineering Standard SAES-J-002
28 May 2007
Technically Acceptable Instrument Manufacturers Instrumentation Standards Committee Members Awami, Luay Hussain, Chairman Tuin, Rienk , Vice Chairman Bogusz, Zbigniew Jozef Dakhil, Tareq Khalil Dhafeeri, Farhan Taieh Ell, Steven Tal Fadley, Gary Lowell Qaffas, Saleh Abdal Wahab Mahmood, Balal Trembley, Robert James Falkenberg, Anton Raymond Grainger, John Francis Jumah, Yousif Ahmed Khalifa, Ali Hussain Madhi, Fawaz Abdullah Qarni, Mahdi Ali
Saudi Aramco DeskTop Standards Table of Contents 1 2 3 4 5 6
Scope............................................................. Conflicts and Deviations................................ References.................................................... Definitions...................................................... General.......................................................... Technically Acceptable Instruments..............
Previous Issue: 26 March 2007 Next Planned Update: 1 July 2010 Revised paragraphs are indicated in the right margin Primary contact: Awami, Luay Hussain on 966-3-8733799
2 2 2 3 4 5
Page 1 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
1
SAES-J-002 Technically Acceptable Instrument Manufacturers
Scope This Standard identifies acceptable manufacturers for instrumentation products. This Standard does not apply to purchasing procedures associated with instrument materials for replenishment of SAMS stock.
2
3
Conflicts and Deviations 2.1
Any conflicts between this standard and other applicable Saudi Aramco Engineering Standards (SAESs), Materials System Specifications (SAMSSs), Standard Drawings (SASDs), or industry standards, codes, and forms shall be resolved in writing by the Company or Buyer Representative through the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran.
2.2
Direct all requests to deviate from this standard in writing to the company or buyer representative, who shall forward such requests to the Manager, Process and Control Systems Department of Saudi Aramco, Dhahran.
References The following is a summary of the Saudi Aramco documents and industrial standards that have been mentioned within this standard: Saudi Aramco References Saudi Aramco Engineering Standards SAES-J-200
Pressure
SAES-J-400
Temperature
SAES-J-502
Analyzer Shelters
SAES-J-904
Foundation Fieldbus (FF) Systems
Saudi Aramco Materials System Specifications 34-SAMSS-117
Turbine Flow Meters
34-SAMSS-118
Positive Displacement Meters
34-SAMSS-318
Automatic Tank Gauging Equipment
34-SAMSS-511
Chromatographs
34-SAMSS-512
Oxygen Analyzers
34-SAMSS-514
Combustible Gas and Hydrogen Sulphide Monitors
34-SAMSS-515
Moisture Analyzers Page 2 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
34-SAMSS-517
Density Meters
34-SAMSS-611
Safety Relief Valves Conventional and Balanced Types
34-SAMSS-612
Safety Relief Valves Pilot Operated Types
34-SAMSS-619
Burner Management Systems for Watertube Boilers
34-SAMSS-623
Programmable Controller Based ESD Systems
34-SAMSS-624
Wellhead Control, Monitoring and Shutdown Systems
34-SAMSS-625
Vibration, Axial Position and Bearing Temperature Monitoring Systems
34-SAMSS-634
Local ZV Shutdown Cabinets and Smart ZV Systems
34-SAMSS-711
Control Valves - General Services
34-SAMSS-716
Pneumatic Actuators On-Off Service
34-SAMSS-717
Hydraulic Valve Actuators
34-SAMSS-718
Electric Motor Operated Valve Actuators
34-SAMSS-815
Annunciators
34-SAMSS-820
Instrument Control Cabinets - Indoor
34-SAMSS-821
Instrument Control Cabinets - Outdoor
34-SAMSS-830
Programmable Logic Controller
34-SAMSS-831
Instrumentation for Packaged Units
34-SAMSS-913
Instrumentation and Thermocouple Cable
Saudi Aramco Standard Drawings
4
AB-036019
Thermowell Assembly and Detail
AC-036413
Orifice Flange Assembly, Raised Face
AB-036414
Orifice Flange Assembly, Ring Joint
Definitions Terms shown in bold font within this document are defined below: Approval: Written authorization by the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran. Page 3 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
Acceptable: Approval is not required to place a purchase order for the product. After the order has been placed, the supplier of this product must ensure that he complies with all aspects of the purchasing contract (e.g., must meet the Saudi Aramco Materials System Specification). CCC: "Commodity Classification Code". License agreement: A contract between a supplier and an owner of rights to an equipment design, allowing a supplier to either (1) assemble the equipment using all the pieces provided by the design owner or (2) assemble the equipment using a combination of pieces provided by the design owner and pieces manufactured by the licensee to the design owner's detailed drawings/specifications. The contract between the licensor and licensee would (1) require the licensee to follow the licensor manufacturing procedures and be routinely audited by the licensor for compliance and (2) require the equipment to be marketed and labeled using the licensor's brand name. Made: Created from raw materials and/or assembled by the manufacturer. Manufacturer: Can be either (1) the owner of the brand name of the equipment or (2) a licensee that has a license agreement. SAMSS: "Saudi Aramco Materials System Specification". Supplier: The person/company etc. who is responsible to provide the equipment to Saudi Aramco. 5
General 5.1
Procurement of a product made by a manufacturer not listed in Section 6 of this Standard is not allowed without approval. Requests for approval by the Instrumentation Standards Committee Chairman of an alternate manufacturer must be supported by documentation identifying how the alternate manufacturer would better serve Saudi Aramco over the manufacturers listed in this standard. Commentary Note: If the request to procure from an alternate manufacturer is not approved, the approval authority is under no obligation to present the reasons for the refusal.
5.2
The manufacturer listings within Section 6 shall be interpreted in the following manner: 5.2.1
Manufacturer is listed with the word "None" as a "Limitation": All products from the manufacturer in the given category are acceptable provided they meet the purchase specifications and the applicable Page 4 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
SAMSS. This does not include material of construction which must be suitable for the specific application.
5.3
5.2.2
Manufacturer is listed with a "Limitation": Only the product that meets the "Limitation" is acceptable. If noted as being manufactured "Under License", only products made under the terms of the license agreement are acceptable.
5.2.3
Manufacturer is listed with a specific "Location": Only products made in the specific location(s) or area(s) are acceptable.
For various engineered systems the following note may be referenced in the list of technically acceptable instruments. This note shall apply only to those categories in which it is referenced. Commentary Note: It is not practical to list sources of supply for this engineered system. Purchase may be from any qualified source that can comply with the mandatory requirements that are listed in each category in which this note is referenced. Verification of compliance shall be the responsibility of the requisition originator. No IU technical evaluation or approval is required. However, IU will assist in such evaluations when requested to do so.
5.4
6
For instrumentation purchases from manufacturers that are not listed in this standard, a request for technical evaluation shall be submitted in writing to the General Supervisor, Process Instrumentation Division, P&CSD. The Instrumentation Unit/PID/P&CSD will evaluate the subject instrument product for technical acceptability, and shall inform the requestor in writing of the result. Only after the instrument has been identified as technically acceptable, and the manufacturer's facility approved by Vendor Inspection, can the purchase order be placed. These instrument products may or may not be added to the technically acceptable manufacturer's list.
Technically Acceptable Instruments 100
Flow 111
Flow Transmitters D/P Transmitters See Category 211 - Pressure and Differential Pressure Transmitters
Page 5 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
112
SAES-J-002 Technically Acceptable Instrument Manufacturers
Flow Indicators 112.1
Equipment Description: Flowmeter, Variable Area, Rotameters CCC: 340289 (9COM - 6000002916)
MANUFACTURER KDG INSTRUMENTS LTD./ SOLARTRON MOBREY KROHNE-MESSTECHNIK GMBH & CO KG ABB AUTOMATION ABB Automation Products GmbH BROOKS INSTRUMENTS (Emerson) ROTA YOKOGAWA GMBH & CO KG
112.2
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30000125
CRAWLEY, GB
None
30000225
DUISBURG, DE
None
30001714 30003533
WARMINSTER, US Gottingen, DE
None
30003283
HATFIELD, US
None
30004188
WEHR, DE
None
Flow Sight Glasses 9COM - 6000002744 (CCC 340105)
Ernst Gage Co. Clark-Reliance-Jacoby-Tarbox Corp . ABB AUTOMATION
VENDOR/ PLANT ID 10018116 10019404 30002559 30001714
Tyco Flow Control-Penberthy
30002066
MANUFACTURER
112.3
LOCATION
LIMITATIONS
Livingston, US
None
Strongsville, OH, US
None
WARMINSTER, US PROPHETSTOWN, US
None None
D/P Gauges See Category 217 - Differential Pressure Gauges
113
Flow Switches 113.1
D/P Switches – CCC 340198 (9COM- 6000002830) See Category 213 - Pressure and Differential Pressure Switches
Page 6 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
113.2
SAES-J-002 Technically Acceptable Instrument Manufacturers
Target Switches – CCC 340199 (9COM- 6000002831)
MANUFACTURER
VENDOR/ PLANT ID
ITT-McDonnell and Miller
10019365
SOR, Inc
10021774
SOR Europe
10001487
Magnetrol
30003796
115
LOCATION
LIMITATIONS
3500 North Spaulding Ave, Chicago, IL60618, USA 14685 West 105th St, Lenexa, Kansas 66215, USA SW, UK Heikensstraat 6, 9240 Zele, Belgium
None
None None None
Orifice Assemblies 115.1
Orifice Plates and Flanges CCC: 340157 (9COM- 6000002792) - Orifice; Assembly: Plate; Flange; Sealing Ring CCC: 340158 (9COM- 6000002793) - Orifice; Plate; ASTM A 182/A 240; Mandatory requirements: For orifice plates - Std. Dwg. AE-036014 For RF orifice flanges - Std. Dwg. AC-036413 For RJ orifice flanges - Std. Dwg. AB-036414
MANUFACTURER DANIEL EUROPE LTD. Daniel Measurement & Control SOLARTRON ISA TECNOMATIC SPA FMC Technologies/Measurement Solutions Crane Manufacturing Inc EUROMISURE SRL
115.2
VENDOR/ PLANT ID 30001107 30001638 30001182 30000010 30001668 30004207 30001575 30003384
LOCATION Stirling, GB HOUSTON, US SHILDON, GB CREMONA, IT Corpus Christi, US Thetford, GB TULSA, US Cremona, IT
LIMITATIONS None None None None None None None
Meter Runs; Prefabricated Process Gas Metering CCC: 340143 (9COM- 6000002778) - Meter Runs; Prefabricated Process Gas CCC: 340144 (9COM- 6000002779) - Meter Runs; Prefabricated Process Liquid
Page 7 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
MANUFACTURER
SAES-J-002 Technically Acceptable Instrument Manufacturers
VENDOR/ PLANT ID
LOCATION WOTTON UNDER EDGE, GB DUBAI, AE Stirling, GB Dordrecht, NL CORPUS CHRISTI, US
ALDERLEY SYSTEMS LTD
30000011
ALDERLEY FZE DANIEL EUROPE LTD. KROHNE OIL & GAS
30003016 30001107 30004108
FMC
30001668
SOLARTRON ISA
30001182
SHILDON, GB
ODS BV EUROMISURE SRL
30003418 30003384
BARENDRECHT, NL Cremona, IT
115.3
LIMITATIONS None None None None None For skids up to 20MMSCF/Day None None
Equipment Description: Orifice Fittings – Retractable, Single and dual Chamber CCC: 340157 (9COM- 6000010784)
MANUFACTURER DANIEL EUROPE LTD. DANIEL MEASUREMENT & CONTORL FMC Energy Systems/Measurement Solutions
116
VENDOR/ PLANT ID 30001107
Stirling, GB
None
30001638
HOUSTON, US
None
30001668
Corpus Christi, TX, US
None
LOCATION
LIMITATIONS
Equipment Description: Flow Meter: Venturi Tube CCC: 340095 (9COM- 6000007215) MANUFACTURER
SOLARTRON ISA ABB INSTRUMENTATION LTD. DANIEL EUROPE LTD. FMC Energy Systems/Measurement Solutions Tecnomatic SPA EUROMISURE SRL
VENDOR/ PLANT ID 30001182 30001058
SHILDON, GB STONEHOUSE, GB
None None
30001107
Stirling, GB
None
30001667
Erie, US
None
30000010 30003384
Cremona, IT Cremona, IT
None None
LOCATION
LIMITATIONS
Page 8 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
117
SAES-J-002 Technically Acceptable Instrument Manufacturers
Equipment Description: Flowmeter; Turbine; In-Line for Process Metering CCC: 340140 (9COM- 6000002775) Specification: 34-SAMSS-117; IR342900 MANUFACTURER
BARTON INSTRUMENT SYSTEMS LTD. DANIEL MEASUREMENT & CONTORL DANIEL MEASUREMENT AND CONTROL FMC Energy Systems/Measurement Solutions COX INSTRUMENT
118
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001183
BOGNOR REGIS, GB
None
30001638
HOUSTON, US
None
30003189
CHIHUAHUA, MX
None
30001667
Erie, US
None
30004446
Scottsdale, US
None
Flowmeter; Positive Displacement for Process Metering; Bi-Rot CCC: 340082 (9COM- 6000002722) Specification: 34-SAMSS-118; IR343000 MANUFACTURER
BOPP AND REUTHER MESSTECHNIK BARTON INSTRUMENT SYSTEMS LTD. Badger Meter, Inc FMC Energy Systems/Measurement Solutions BRODIE METER CO., LLC
120
VENDOR/ PLANT ID
LOCATION
30001082
MANNHEIM, DE
LIMITATIONS None
30002198
BOGNOR REGIS, GB Milwaukee, US
None
30001667
Erie, US
None
30003456
Statesboro, US
None
30001183
None
Flowmeter; Annubar; Pitot Tube CCC: 340032 (9COM- 6000002677) MANUFACTURER
SOLARTRON MOBREY Meriam Instruments Div
VENDOR/ PLANT ID 30000125 30002791
Emerson-Rosemount Division EUROMISURE SRL
30003384
LOCATION CRAWLEY, GB Cleveland, US All Locations Accepted Cremona, IT
LIMITATIONS None None None None
Page 9 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
121
SAES-J-002 Technically Acceptable Instrument Manufacturers
Flowmeter; Magnetic CCC: 340096 (9COM- 6000002735) MANUFACTURER
Emerson Process Management Flow BV /BROOKS ABB INSTRUMENTATION LTD. BOPP AND REUTHER MESSTECHNIK Foxboro Company Yokogawa Electric Corporation Emerson-Rosemount Division Krohne
122
VENDOR/ PLANT ID 30004404
EDE, NL
None
30001058 30001082
Stonehouse, GB Mannheim, DE
None None
30002059 30001465 30002398 30004108
Foxboro, US Japan Chanhassen, MN, US Dordrecht, NL
None None None None
LOCATION
LIMITATIONS
Ultrasonic Flowmeters 122.1
Flow Meter: Ultrasonic; Liquid, Gas and Flare Line Service CCC: 340099 (9COM- 6000002738)
MANUFACTURER Krohne GE Panametrics Roxar Flow Measurement (prev. Fluenta) ELSTER-INSTROMET NV Emerson-Daniel Division Sick-Engineering GmbH
122.2
VENDOR/ PLANT ID 30000225 30004108 30001228 30001865 30003346 30000149 30001638 30003916
LOCATION
LIMITATIONS
Duisberg, DE Dordrecht, NL Shannon, IE Waltham, US Bergen, NO
Liquid and Gas
Essen, BE Houston, US
Gas Only Gas only Gas Only.
Ottendorf-Okrilla, DE
Liq, Gas and Flare Flare only
Flowmeter; Multipath Ultrasonic for Process Metering; Gas Service CCC: 340142 (9COM- 6000002777)
MANUFACTURER ELSTER-INSTROMET NV Emerson-Daniel Division Krohne Sick-Engineering GmbH
VENDOR/ PLANT ID 30000149 30001638 30000225 30004108
ESSEN, BE Houston, US Duisberg, DE Dordrecht, NL
None None
30003916
Ottendorf-Okrilla, DE
None
LOCATION
LIMITATIONS
None
Page 10 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
123
SAES-J-002 Technically Acceptable Instrument Manufacturers
Flowmeter; Vortex; Vortex Shedding CCC: 340100 (9COM- 6000002739) MANUFACTURER
ABB INSTRUMENTATION LTD. ABB AUTOMATION ABB Automation Products GmbH Foxboro Company Yokogawa Electric Corporation Emerson-Rosemount Division Emerson Process Management Flow BV /BROOKS
124
VENDOR/ PLANT ID 30001058 30001714 30003533 30002059 30001465 30002398 30004404
LOCATION
LIMITATIONS
STONEHOUSE, GB WARMINSTER, US Gottingen, DE Foxboro, US Japan Chanhassen, MN, US EDE, NL
None None None None None None
Restriction Orifices - Union Type Pending Technical Evaluation
126
Thermal Flowmeters 9COM- 6000002736 (CCC 340097) - Flow Meter/Switch: Thermal MANUFACTURER
VENDOR/ PLANT ID
Fluid Components International
30002423
Emerson- Brooks Instruments Kurz Instruments
30000079 30003794
127
LOCATION San Marcos, CA, USA Veenendaal, NL Monterey, CA, US
LIMITATIONS None None None
Flow Nozzles 9COM- 6000002740 (CCC 340101) - Flow Nozzle MANUFACTURER
Crane Manufacturing, Inc Emerson-Daniel Division Fluidic Techniques/FTI Industries EUROMISURE SRL
VENDOR/ PLANT ID 30001575 30001638 30002413 30003384
LOCATION Tulsa, OK Houston, US Mansfield, TX, US Cremona, IT
LIMITATIONS None None None None
Page 11 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
128
SAES-J-002 Technically Acceptable Instrument Manufacturers
Flowmeter; Coriolis Mass CCC: 340288 (9COM- 6000002915) MANUFACTURER
Emerson/MICRO MOTION INC. Foxboro Company FMC Energy Systems/Measurement Solutions Endress + Hauser FLOWTEC AG ROTA YOKOGAWA GMBH & CO KG
129
VENDOR/ PLANT ID 30001647 30004404 30002059
BOULDER, US EDE, NL Foxboro, US
None
30001667
Erie, US
None
30003473
REINACH, CH
None
30004188
WEHR, DE
None
LOCATION
LIMITATIONS None
Specialty Flowmeters 129.1
Flowmeter; V-Cone Type CCC: 340103 (9COM- 6000002742)
MANUFACTURER McCrometer
200
VENDOR/ PLANT ID 30001590
LOCATION HEMET, US
LIMITATIONS None
Pressure 211
Pressure and Differential Pressure Transmitters CCC 340219 (9COM- 6000002850) - Transmitter: Flow CCC 340220 (9COM- 6000002851) - Transmitter: Pressure MANUFACTURER
VENDOR/ PLANT ID
Emerson- Rosemount Division Rosemount Inc Foxboro Company Honeywell, Inc. ABB instrumentation SPA ABB Automation Products Yokogawa Electric SMAR
10021582
LOCATION All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted All Locations Accepted Houston, US
LIMITATIONS None None None None None None None
Page 12 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
212
SAES-J-002 Technically Acceptable Instrument Manufacturers
Pressure Gauges CCC 340116 (9COM- 6000002754) - Indicator: Pressure Specification: Mandatory requirements are specified in SAES-J-200. MANUFACTURER
Ametek, Inc. (U.S. Gauge PMT) WIKA Middle East WIKA GMBH Dresser Al-Rushaid Valve & Instrument/ Ashcroft
VENDOR/ PLANT ID 10016194
30000428
Dresser Instrument Division, Ashcroft Dwyer Instruments, Inc. (Magnehelic)
213
10017797
LOCATION Feasterville, PA US All Locations Accepted
LIMITATIONS None None
Jubail
None
All Locations Accepted
None
Michigan City, US
None
Pressure and Differential Pressure Switches CCC 340198 (9COM- 6000002830) - Switch: Differential Pressure CCC 340202 (9COM- 6000002834) - Switch: Pressure MANUFACTURER
WIKA Middle East WIKA GMBH Barton Instrument Systems Custom Control Sensors, Inc Dresser Industries, Ashcroft Instrument Div Mercoid Corp SOR Europe SOR, Inc United Electric Controls
214
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001183 10004389
All Locations Accepted Bognor Regis, UK SWINDON, UK
None None
30000428
Jubail, KSA
None
10017798 10001487 10021774 10022325
Michigan City, US SW, UK Lenexa, KS, US Watertown, MA, US
None None None None
None
Multivariable Transmitters CCC 340299 (9COM- 6000002926) - Transmitters Multivariable MANUFACTURER
Emerson- Rosemount Division Honeywell, Inc. ABB Automation Products GMBH Ltd Yokogawa Electric
VENDOR/ PLANT ID 10029032 30001743 30004167 30003284
LOCATION
LIMITATIONS
Wessling, DE Phoenix, AZ, US
None None
MINDEN, DE
None
Kofu, JP
None
Page 13 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
215
SAES-J-002 Technically Acceptable Instrument Manufacturers
Remote Seals CCC 340052 (9COM– 6000002693) - Chemical Seal MANUFACTURER
VENDOR/ PLANT ID
217
LIMITATIONS
30001183
820 Pennsylvania Blvd.Feasterville, PA 9053, US Bognor Regis, UK
30000428
Jubail
None
All Locations Accepted All Locations Accepted
None None
Ametek, Inc. (U.S. Gauge PMT) Barton Instrument Systems Dresser Al-Rushaid Valve & Instrument/ Ashcroft DRESSER (INSTRUMENT DIV) WIKA
LOCATION
None None
Differential Pressure Gauges 9COM- 6000002749 (CCC 340111) - Indicator: Differential Pressure MANUFACTURER
ABB instrumentation Ltd ABB Automation Barton Instrument Systems Dresser Al-Rushaid Valve & Instrument/ Ashcroft DRESSER (INSTRUMENT DIV) Dwyer Instruments, Inc Honeywell, Inc. Meriam Instruments Div WIKA
300
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
All Locations Accepted
None
30001183
BOGNOR REGIS
None
30000428
Jubail
None
All Locations Accepted Michigan City, US All Locations Accepted Cleveland, OH, US All Locations Accepted
None None None None None
10017797 10021406
Level 311
D/P Level Transmitters See Category 211 - Pressure and Differential Pressure Transmitters
312
Level Gauge Glasses CCC 340255 (9COM- 6000002886) - Glass: Level Gauge MANUFACTURER
Simco Engineers Ltd Clark-Reliance-Jerguson Gage and Valve Co Penberthy/Tyco Flow Control Cesare Bonetti Spa K-Tek Corp
VENDOR/ PLANT ID 10001569 30002559 30002066 30003728 30003005
LOCATION
LIMITATIONS
Jarrow, UK Strongsville, OH, US
None None
PROPHETSTOWN, US Milano, It Prairieville, LA, US
None None None
Page 14 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
313
SAES-J-002 Technically Acceptable Instrument Manufacturers
Level Switches - Float and Displacer Type CCC 340200 (9COM- 6000002832) - Switch: Liquid Level MANUFACTURER
K-Tek Corp Magnetrol International INC. Magnetrol International NV SOLARTRON MOBREY LTD SOR, Inc
314
VENDOR/ PLANT ID 30003005 30001819 30003796 30000124 10021774
LOCATION Prairieville, LA, US Downers Grove, US Zele, BE SLOUGH, GB Lenexa, KS, US
LIMITATIONS None None None None
Transmitter; Liquid Level; Displacer CCC 340125 (9COM- 6000002763) – Level Instrument Displacer Type: (Transmitters/Controllers; NA) MANUFACTURER
SOLARTRON MOBREY LTD MASONEILAN DIVISION MAGNETROL INTERNATIONAL MAGNETROL INTERNATIONAL NV FOXBORO COMPANY FISHER Controls Inc FISHER ROSEMOUNT S.A. FISHER ROSEMOUNT LTD DRESSER PRODUCTS INDUSTRIELS Dresser Industries
315
VENDOR/ PLANT ID 30000124 30001611 30001819 30003796 30002059 30001650 30003023 30003024 30001203
LOCATION SLOUGH, GB AVON, US Downers Grove, US Zele, BE FOXBORO, US Marshalltown, US CERNAY, FR BUDAPEST, HU CONDESURNOIREAU, FR Jubail, KSA
30000428
LIMITATIONS None None None None None None None None None
Level Instruments - Ultrasonic CCC: 340124 (9COM- 6000002762) MANUFACTURER
Ametek DREXELBROOK Magnetrol International INC. Magnetrol International NV ENDRESS & HAUSER INC. ENDRESS AND HAUSER SOLARTRON MOBREY LTD
VENDOR/ PLANT ID 30001485 30001819 30003796 30001859 30003797 30000124
LOCATION HORSHAM, US Downers Grove, US Zele, BE GREENWOOD, US Maulburg, Germany SLOUGH, GB
LIMITATIONS None None None None None
Page 15 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
316
SAES-J-002 Technically Acceptable Instrument Manufacturers
Level Instruments – Capacitance or RF Addmittance CCC 340123 (9COM- 6000002761) - Level Control: Capacitance Type MANUFACTURER
Ametek DREXELBROOK Magnetrol International INC. Magnetrol International NV ENDRESS & HAUSER INC. ENDRESS AND HAUSER
317
VENDOR/ PLANT ID 30001485 30001819 30003796 30001859 30003797
LOCATION HORSHAM,US Downers Grove, US Zele, BE GREENWOOD, US Maulburg, Germany
LIMITATIONS None None None None
Level Instruments - Nuclear Radiation 9COM- 6000002764 (CCC 340126) - Level Instrument: Radiation Type MANUFACTURER
Thermo Electron Corp (Texas Nuclear) Ohmart/Vega Corp ENDRESS & HAUSER INC. ENDRESS AND HAUSER
318
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001630
Round Rock, TX, US
None
30001852 30001859 30003797
Cincinnati, Ohio, US GREENWOOD, US Maulburg, Germany
None None None
Tank Gauging Equipment – Servo and Float CCC: 340206 (9COM- 6000002838) Specification: 34-SAMSS-318 MANUFACTURER
ENRAF TERMINAL AUTOMATION L & J TECHNOLOGIES Varec, Inc
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001134
DELFT, NL
None
30001679 10024848
HILLSIDE, US Norcross, US
None None
Page 16 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
319
SAES-J-002 Technically Acceptable Instrument Manufacturers
Tank Gauging Equipment – Radar (for inventory tank use only) CCC: 340190 (9COM- 6000002822) Specification: 34-SAMSS-319 MANUFACTURER
ENRAF TERMINAL AUTOMATION SAAB ROSEMOUNT TANK RADAR AB ENDRESS AND HAUSER
320
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001134
DELFT, NL
None
30001253
GOTEBORG, SE
None
30003797
Maulburg, Germany
ON HOLD
Guided Wave Radar (GWR) Level Transmitters 9COM- 6000007390 (CCC 340132) - Transmitter: Level; GWR MANUFACTURER
MAGNETROL INTERNATIONAL INC. MAGNETROL INTERNATIONAL NV SAAB ROSEMOUNT TANK RADAR AB K-Tek ENDRESS AND HAUSER
321
VENDOR/ PLANT ID 30001819
LOCATION
LIMITATIONS
30003796
DOWNERS GROVE, US ZELE, BE
None None
30001253
GOTEBORG, SE
None
30003005 30003797
Prairieville, LA, US Maulburg, Germany
None None
Level Gauge- Magnetic Type (MLI) CCC: 340127 (9COM- 6000002765) – Gauge; Level; Magnetic MANUFACTURER
K-tek Corp Cesare Bonetti SPA MAGNETROL INTERNATIONAL INC. MAGNETROL INTERNATIONAL NV
VENDOR/ PLANT ID 30003005 30003728 30001819 30003796
LOCATION Prairieville, US Milano, IT DOWNERS GROVE, US ZELE, BE
LIMITATIONS None None None None
Page 17 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
400
SAES-J-002 Technically Acceptable Instrument Manufacturers
Temperature 411
Temperature Transmitters CCC 340221 (9COM- 6000002852) - Transmitter: Temperature MANUFACTURER
VENDOR/ PLANT ID
Emerson- Rosemount Division Foxboro Company Honeywell, Inc. ABB instrumentation SPA ABB Automation Yokogawa Electric SMAR WIKA
412
10021582
LOCATION
LIMITATIONS
All Locations Accepted All Locations Accepted All Locations Accepted
None None None
All Locations Accepted
None
All Locations Accepted
None
Houston, US All Locations Accepted
None None
Temperature Indicators CCC 340118 (9COM- 6000002756) - Indicator: Temperature- Bimetallic and Expansion Types Specification: Mandatory requirements are specified in SAES-J-400. MANUFACTURER
Ametek, Inc. (U.S. Gauge PMT) ABB instrumentation Ltd ABB Automation Dresser Al-Rushaid Valve & Instrument/ Ashcroft
VENDOR/ PLANT ID 10016196
820 Pennsylvania Blvd. Feasterville, PA 19053 All Locations Accepted
30000428
Jubail
30001251
All Locations Accepted All Locations Accepted Crissier, CH
DRESSER (INSTRUMENT DIV) WIKA RUEGER SA
LOCATION
LIMITATIONS None None None None None None
Page 18 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
413
SAES-J-002 Technically Acceptable Instrument Manufacturers
Temperature Switches – Mechanical 9COM- 6000002835 (CCC 340203) - Switch: Temperature MANUFACTURER
Custom Control Sensors, Inc Mercoid Corp Barton Instrument Systems SOR, Inc United Electric Controls Dresser Industries, Ashcroft Instrument Div WIKA Middle East WIKA GMBH
415
VENDOR/ PLANT ID 10004389 10017798 30001183 10021774 10022325
SWINDON, UK Michigan City, IN, US Bognor Regis, UK Lenexa, KS, US Watertown, MA, US
None None None None None
30000428
Jubail, KSA
None
10029526 10032628
Dubai, AE Klingenberg, DE
None
LOCATION
LIMITATIONS
Thermocouples CCC 340258 (9COM- 6000002888) – Thermocouple Specification: Mandatory requirements are specified in SAES-J-400. MANUFACTURER
Honeywell, Inc Minco Products, Inc Thermo Electric Co, Inc Doedijns Thermo Electric BV Gay Engineering and Sales Co. (GAYESCO) United Electric Controls Conax Buffalo Technologies Okazaki Manufacturing Co WIKA RUEGER SA
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
10020168 30001963 30001296
All Locations Accepted Minneapolis, US Saddle Brook, US WADDINXVEEN, NL
None None None None
10031229
Pasadena, TX, US
None
10022325 10021385 10001266
Watertown, MA, US Buffalo, US Chuo-Ku All Locations Accepted Crissier, CH
None None None None None
30001251
Page 19 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
416
SAES-J-002 Technically Acceptable Instrument Manufacturers
Resistance Temperature Detectors CCC: 340181 (9COM- 6000002814) Specification: Mandatory requirements are specified in SAES-J-400 MANUFACTURER
ABB AUTOMATION PRODUCTS GMBH MINCO PRODUCTS INC. CONAX BUFFALO CORPORATION THERMO ELECTRIC Co., Inc Doedijns THERMO ELECTRIC BV Watlow Gordon WIKA INSTRUMENTS LIMITED RUEGER SA
417
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001111
ALZENAU, DE
None
30001830
MINNEAPOLIS, US
None
30001920
BUFFALO,US
None
30001963
SADDLE BROOK, US
None
30001296
WADDINXVEEN, NL
None
30002010
Richmond, US All Locations Accepted Crissier, CH
None None None
30001251
Thermistors Not Recommended.
418
Thermowell CCC: 340214 (9COM- 6000002845) Specification: Mandatory requirements are specified in SAES-J-400 MANUFACTURER
VENDOR/ PLANT ID
Dresser al-rushaid valve and instrument
30000428
Abb instrumentation Ltd.
30001098
Abb automation products gmbh Dresser europe gmbh (instrument Thermo-couple products company Doedijns Thermo electric BV Minco products inc. Okazaki Manufacturing Co WIKA INSTRUMENTS LIMITED
LOCATION JUBAIL,SA
LIMITATIONS None
30001111 30001119
CHEADLE HULME, CHEADLE, GB ALZENAU,DE BAESWEILER, DE
None None
30002388
WINFIELD, US
None
30001296 30001830 30001422
Waddinxveen, NL MINNEAPOLIS, US Chuo-Ku
None None None
30004141 30003986
Edmonton, CA DE
None
None
Page 20 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
500
SAES-J-002 Technically Acceptable Instrument Manufacturers
Analytical 511
Analyzer; Chromatograph; Process Gas or Liquid CCC: 340287 (9COM- 6000002914) Specification: 34-SAMSS-511; IR343200 MANUFACTURER
ABB AUTOMATION Siemens APPLIED AUTOMATION Yokogawa Electric Corp Hamilton Sundstarnd
512
VENDOR/ PLANT ID 30001706 30001930
LEWISBURG, US BARTLESVILLE, US
None None
30001465 10024160
Japan Pamona, CA, US
None None
LOCATION
LIMITATIONS
Oxygen Analyzers CCC: 340020 (9COM- 6000002666) Specification: 34-SAMSS-512; IR345400 MANUFACTURER
ABB INSTRUMENTATION LTD. GE/PANAMETRICS LTD SERVOMEX UK LTD. Yokogawa Electric Corp. YOKOGAWA ELECTRIC KOFU PLANT AMETEK PROCESS INSTRUMENTS TELEDYNE INSTRUMENTS Sick-Maihak AG
VENDOR/ PLANT ID 30001058 30001228 30001293 30001465
Stonehouse, GB Shannon, IE Crowborough, GB Musashino-shi, JP
None None None None
30003284
Kofu, JP
None
30001481
Pittsburgh, US
None
30001958 30003917
City of industry, US Reute, DE Industriestrasse 1, 63594 hasselroth, de
Emerson Process ManagementFisher Rosemount GmbH & Co., Siemens Applied Automation Rosemount Analytical Inc
LOCATION
30001930 30002396
Bartlesville, US Solon, OH, US
LIMITATIONS
None None Polarographic and Paramagnetic principle None None
Page 21 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
513
SAES-J-002 Technically Acceptable Instrument Manufacturers
pH Analyzers 9COM- 6000002667 (CCC 340022) - Analyzer: pH MANUFACTURER
ABB INSTRUMENTATION LTD. Foxboro Co. GLI International YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT Horiba Instruments Emerson - Rosemount Analytical Division
514
VENDOR/ PLANT ID 30001058 30002059 10018722 30001465
LOCATION
LIMITATIONS
STONEHOUSE, GB Foxboro, US Milwaukee, US MUSASHINO-SHI, JP
None None None None
30003284
KOFU, JP
None
10019060
Irvine, CA, US
None
30001646
Irvine, US
None
Hydrogen Sulfide Monitors; Gas CCC: 340151 (9COM- 6000002786) Specification: 34-SAMSS-514; IR344900 MANUFACTURER
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
DETECTOR ELECTRONICS CORPORATED GENERAL MONITORS INC
30001597
MINNEAPOLIS, US
On-HOLD
30001693
None
DETCON INCORPORATED
30002064
LAKE FOREST, US THE WOODLANDS, US
515
On-HOLD
Moisture Analyzers CCC: 340018 (9COM- 6000002664) Specification: 34-SAMSS-515; IR347400 MANUFACTURER
ALPHA MOISTURE SYSTEMS PANAMETRICS LIMITED PANAMETRICS SHAW MOISTURE METERS (UK) LTD. AMETEK PROCESS INSTRUMENTS AMETEK CANADA INC Servomex
VENDOR/ PLANT ID 30000178 30001228 30001865
BRADFORD, GB SHANNON, IE WALTHAM, US
None None None
30001268
BRADFORD, GB
None
30001483
NEWARK, US
None
30003060 30001293
CALGARY, CA Crowborough, UK
None None
LOCATION
LIMITATIONS
Page 22 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
516
SAES-J-002 Technically Acceptable Instrument Manufacturers
Analyzer Shelters CCC: 340270 (9COM- 6000002898) Specification: SAES-J-502 MANUFACTURER
ABB AUTOMATION E.C. ABB PASTECH Emerson Process Management GmbH Siemens Applied Automation Computer System Protection (Al-Mannai) YOKOGAWA ELECTRIC ASIA (YAS)
517
VENDOR/ PLANT ID 30000324 30001712
Manama, BH HOUSTON, US
None None
10029032
Wessling, DE
None
30001930
BARTLESVILLE, US
None
30003513
Dammam, SA
None
30000134
SG
None
LOCATION
LIMITATIONS
Density Meter; Gas and Liquid CCC: 340080 (9COM- 6000002720) Specification: 34-SAMSS-517; IR345300 MANUFACTURER
Thermo Electron Corp KDG INSTRUMENTS LTD / SOLARTRON MOBREY YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
518
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001630
Round Rock, TX, US
None
30000125
CRAWLEY, GB
None
30001465
MUSASHINO-SHI, JP
None
30003284
KOFU, JP
None
Gravitometers 9COM- 6000002746 (CCC 340107) – Gravitometer MANUFACTURER
Thermo Electron Corp SOLARTRON MOBREY
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001630
Round Rock, TX, US
None
30000125
CRAWLEY, GB
None
Page 23 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
520
SAES-J-002 Technically Acceptable Instrument Manufacturers
BS&W Analyzers 9COM- 6000002655 (CCC 340008) - Analyzer: Bottom Sediment and Water MANUFACTURER
Thermo Electron Corp FMC Fluid Control/Invalco Halliburton Energy Services. Agar Corp ROXAR Flow Measurement AS
521
VENDOR/ PLANT ID
LOCATION
30001630
Round Rock, TX, US
10018327 30001727 30002049 30003347
Stephenville, US US Houston, US STAVANGER, NO
LIMITATIONS None None None None None
Chlorine Analyzers and Chlorinators 9COM- 6000002658 (CCC 340011) - Analyzer: Chlorine MANUFACTURER
ABB INSTRUMENTATION LTD. Emerson - Rosemount Analytical Division YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
522
VENDOR/ PLANT ID 30001058
STONEHOUSE, GB
None
30001646
Irvine, US
None
30001465
MUSASHINO-SHI, JP
None
30003284
KOFU, JP
None
LOCATION
LIMITATIONS
Combustible Gas Monitors CCC: 340147 (9COM- 6000002782) - Monitor; Gas; Combustible CCC: 340152 (9COM- 6000002787) - Monitor; Gas; Combustible; Open Path Type Specification: 34-SAMSS-514; IR344900 MANUFACTURER
DETECTOR ELECTRONICS CORPORATED GENERAL MONITORS INC GENERAL MONITORS IRELAND DETCON INCORPORATED
VENDOR/ PLANT ID 30001597
MINNEAPOLIS, US
ON-HOLD
30001693 30003264
LAKE FOREST, US Galway, IE
None none
30002064
THE WOODLANDS, US
None
LOCATION
LIMITATIONS
Page 24 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
523
SAES-J-002 Technically Acceptable Instrument Manufacturers
Conductivity Analyzers CCC 340013 (9COM- 6000002660) - Analyzer: Conductivity MANUFACTURER
ABB INSTRUMENTATION LTD. Emerson - Rosemount Analytical Division Horiba YOKOGAWA ELECTRIC CORP. YOKOGAWA ELECTRIC KOFU PLANT
524
VENDOR/ PLANT ID 30001058
STONEHOUSE, GB
None
30001646
Irvine, US
None
10019060 30001465
Irvine, CA, US MUSASHINO-SHI, JP
None None
30003284
KOFU, JP
None
LOCATION
LIMITATIONS
Continuous Emission Monitoring Analyzers 9COM- 6000002663 (CCC 340017) - Analyzer: Furnace/Flue Gas MANUFACTURER
ABB Analytical AMETEK PROCESS INSTRUMENTS
VENDOR/ PLANT ID 10026423
Telford, GB
None
30001481
PITTSBURGH, US
None
SERVOMEX UK LTD.
30001293
Sick-Maihak AG Yokogawa
30003917 30003284
525
LOCATION
CROWBOROUGH, GB Reute, DE Kufo, JP
LIMITATIONS
None None
FTIR/NIR Analyzers 9COM- 6000002925 (CCC 340298) - ANALYZER; NIR SPECTROMETER MANUFACTURER
ABB Analytical Hamilton Sundstarnd Yokogawa Electric Corp
VENDOR/ PLANT ID 10026423 10024160 30001465
LOCATION Telford, GB Pamona, CA, US Japan
LIMITATIONS None None None
Page 25 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
530
SAES-J-002 Technically Acceptable Instrument Manufacturers
Process Color Analyzers 9COM- 6000002659 (CCC 340012) - Analyzer: Color
ABB INSTRUMENTATION LTD. Ametek Horiba
VENDOR/ PLANT ID 30001058 30001481 10019060
Metrisa, Inc
10020215
MANUFACTURER
600
LOCATION
LIMITATIONS
STONEHOUSE, GB PITTSBURGH, US Irvine, CA, US 25 Wiggins Avenue Bedford, MA 01730
None None None None
Safety 605
Surge Relief Valves CCC: 340267 (9COM- 6000002896) - Valve; Relief; Surge Relief Station 605.1
Gas Loaded Surge Relief Valves
MANUFACTURER SPX- M&J VALVE OPERATIONS
605.2
VENDOR/ PLANT ID 30001637
LOCATION HOUSTON, US
LIMITATIONS None
Pilot Operated Surge Relief Valves
MANUFACTURER SPX- M&J VALVE OPERATIONS MOKVELD B.V. CONTROL COMPONENTS INCORPORATED (CCI)
VENDOR/ PLANT ID 30001637 30001213 30001921
LOCATION HOUSTON, US GOUDA, NL RANCHO SANTA MARGARITA, US
LIMITATIONS None None None
Page 26 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
611
SAES-J-002 Technically Acceptable Instrument Manufacturers
Safety Relief Valves; Flanged, Conventional and Balanced Bellows CCC: 340238 (9COM- 6000002869) Specification: 34-SAMSS-611; IR341900 MANUFACTURER
DRESSER AL-RUSHAID VALVE AND DRESSER INDUSTRIAL VALVE ANDERSON GREENWOOD CROSBY ANDERSON GREENWOOD CROSBY FARRIS ENGINEERING FARRIS ENGINEERING LESER GMBH & CO KG Tyco – Safety Systems UK
612
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30000428
JUBAIL, SA
None
30001610
ALEXANDRIA, US
None
30001299
STOCKPORT, GB
None
30001812
STAFFORD, US
None
30003350 30003351 30003922 30000217
Brecksville, US Brantford, CA Hohewestedt, DE Worsley, UK
None None None None
Safety Relief Valves; Pilot Operated CCC: 340237 (9COM- 6000002868) Specification: 34-SAMSS-612; IR342000 612.1
For Processing Plants
MANUFACTURER DRESSER AL-RUSHAID VALVE AND DRESSER INDUSTRIAL VALVE ANDERSON GREENWOOD CROSBY FARRIS ENGINEERING Tyco – Safety Systems UK
612.2
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30000428
JUBAIL, SA
None
30001610
ALEXANDRIA, US
None
30001812
STAFFORD, US
None
30003350 30000217
Brecksville, US Worsley, UK
None None
For Storage Tanks and Spheroids
MANUFACTURER Tyco – Whessoe Tyco – Varec ANDERSON GREENWOOD CROSBY Groth Corporation
VENDOR/ PLANT ID 10001826 30001812
Manchester, UK STAFFORD, US
None None
30001812
STAFFORD, US
None
30003785
STAFFORD, US
None
LOCATION
LIMITATIONS
Page 27 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
613
SAES-J-002 Technically Acceptable Instrument Manufacturers
Valve; Vent Pressure Vacuum CCC: 340236 (9COM- 6000002867) MANUFACTURER
L & J TECHNOLOGIES ANDERSON GREENWOOD CROSBY Tyco – Whessoe (UK Factory) Tyco – Varec (USA Factory) Groth Corporation
614
VENDOR/ PLANT ID 30001679
HILLSIDE, US
None
30001812
STAFFORD, US
None
10001826 30001812 30003785
UK STAFFORD, US STAFFORD, US
None None None
LOCATION
LIMITATIONS
Rupture Discs 9COM- 6000002549 (CCC 340182) - Rupture Disc Assembly MANUFACTURER
BS&B Safety Systems, Inc Fike Metal Products Corp
615
VENDOR/ PLANT ID 30003458 30003457
LOCATION Tulsa, OK, US Missouri, USA
LIMITATIONS None None
Flame Arrestors 9COM- 6000002679 (CCC 340034) - Arrestor: Flame MANUFACTURER
L&J Technologies (Shand and Jurs) Tyco – Varec Groth Corporation
616
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001679
Hillside, US
None
30002028 30003785
Cypress, US STAFFORD, US
None None
Check Valve (Gauge Glasses) 9COM- 6000002680 (CCC 340035)- Valve: Backflow Preventer 9COM- 6000002854 (CCC 340223) - Valve: Check; Level Gauge Glass; Flow Shut-Off MANUFACTURER
Clark-Reliance-Jerguson Gage and Valve Co Tyco Flow Control-Penberthy Incorporated Simco Engineers Cesare Bonetti
VENDOR/ PLANT ID 10019404 30002066 10001569 10003565
LOCATION Strongsville, US PROPHETSTOWN, US Jarrow, UK Garbagnate, IT
LIMITATIONS None None None None
Page 28 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
617
SAES-J-002 Technically Acceptable Instrument Manufacturers
Flame Monitoring Systems CCC: 340092 (9COM- 6000002732); IR 345600 Specification: 34-SAMSS-619 MANUFACTURER
HAMWORTHY COMBUSTION ENGINEERING ABB INSTRUMENTATION FIREYE ELECTRONICS FORNEY INTERNATIONAL Honeywell, Inc
619
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001164
POOLE, GB
None
30001252 30001599 30001671 30001743
PERO, IT DERRY, US CARROLLTON, US Phoenix, AZ, US
None None None None
Burner Management Systems for Watertube Boilers CCC: 340083 (9COM- 6000002723) - Emergency Shutdown System; Programmable Logic Controller MANUFACTURER
INDUSTRIAL CONTROL SERVICES LTD. INDUSTRIAL CONTROL SERVICES
VENDOR/ PLANT ID
LOCATION
30001186
MALDON, GB
Trusted R3.4
30001898
HOUSTON, US
Trusted R3.4
TRICONEX CORPORATION
30003780
Webster, TX, USA
Invensys Middle East
30003562
Dubai, UAE
624
LIMITATIONS
Tricon V10 or Trident V1.3 Tricon V10 or Trident V1.3
Speed Sensors (RPM) 9COM- 6000002820 (CCC 340187) - Sensor: Speed Specification: 34-SAMSS-625 MANUFACTURER
Woodward Governor BENTLY-NEVADA CORPORATION SKF CONDITION MONITORING,
VENDOR/ PLANT ID 10001845 30001527 30001915
Rockwell Automaiton-Entek (IRD)
30001908
IRD UK LTD
10000845
LOCATION
LIMITATIONS
Rockford, IL, US MINDEN, US
None None
SAN DIEGO, US Milwaukee, Wisconsin, US Saltney Ferry, UK
None None None
Page 29 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
625
SAES-J-002 Technically Acceptable Instrument Manufacturers
Vibration Monitors; Non-Contacting Type CCC: 340162 (9COM- 6000002796) Specification: 34-SAMSS-625; IR345100 MANUFACTURER
BRUEL & KJAER VIBRO A/S BENTLY-NEVADA CORPORATION SKF CONDITION MONITORING, Rockwell Automaiton-Entek (IRD)
626
VENDOR/ PLANT ID 30001096
NAERUM, DK
None
30001527
MINDEN, US
None
30001915
SAN DIEGO, US Milwaukee, Wisconsin, US
None None
LOCATION
LIMITATIONS
LOCATION
30001908
LIMITATIONS
Monitor Systems; Temperature CCC: 340145 (9COM- 6000002780) Specification: 34-SAMSS-625 MANUFACTURER
Ametek-ROCHESTER INSTRUMENT SYSTEMS LTD
VENDOR/ PLANT ID 30001249
Ametek-ROCHESTER INSTRUMENT SYSTEMS LTD
DUNFERMLINE, GB
None
225 North Union St., Rochester, NY 14605, US
None
BENTLY-NEVADA CORPORATION/GE Power
30001527
MINDEN, US
None
Rockwell Automaiton-Entek (IRD)
30001908
Milwaukee, Wisconsin, US
None
30001915
SAN DIEGO, US
None
30003563
Fribourg, CH
None
SKF CONDITION MONITORING/Vibro-Meter, Vibro-Meter S.A.
627
Shutdown Cabinets - Local, Pneumatic (Deleted)
Page 30 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
628
SAES-J-002 Technically Acceptable Instrument Manufacturers
Shut Down Cabinets - Local, Electro-pneumatic 628.1
CCC: 340039 (9COM- 6000002684) - Cabinet: Shutdown, Local, Pneumatic and Electric without Partial Stroke Test Feature Specification: 34-SAMSS-634
ELECTROMACH B.V.
VENDOR/ PLANT ID 30001126
DRALLIM INDUSTRIES LTD
30003021
Biffi Italia SRL TOTAL ENGINEERING SERVICES
MANUFACTURER
628.2
LOCATION
LIMITATIONS None
30001080
HENGELO, NL ST LEONARDS -ONSEA, GB Fiorenzuola D'Arda, IT
30001841
HARVEY,US
None
None None
CCC: 340242 (9COM- 6000002873) Cabinet: Shutdown, Local, Pneumatic and Electric with Partial Stroke Test Feature Specification: 34-SAMSS-634
MANUFACTURER
VENDOR/ PLANT ID
DRALLIM INDUSTRIES LTD
30003021
Biffi Italia SRL
30001080
628.3
LOCATION ST LEONARDS ON-SEA, GB Fiorenzuola D'Arda, IT
LIMITATIONS None None
Smart ZV Controller (9COM- 6000010782)- Smart Valve Controller and Software that provide the local control of Smart ZV with predefined Partial Stroke Test Feature and local test pushbutton Specification: 34-SAMSS-634
MANUFACTURER EMERSON- FISHER CONTROLS INC METSO AUTOMATION
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001650
Marshall Town, US
None
30003028
Helsinki, FI
None
Page 31 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
628.4
SAES-J-002 Technically Acceptable Instrument Manufacturers
Smart ZV Assembly (9COM- 6000002889) - Valve; 34-SAMSS-634, Valve Emergency Shutdown, Smart ZV Valve/Actuator Assembly with Local Control Panel and Digital Positioner Specification: 34-SAMSS-634
MANUFACTURER Bettis BIFFI ITALIA SRL METSO AUTOMATION
629
VENDOR/ PLANT ID 30001531 30003605 30001080 30003028
LOCATION
LIMITATIONS
Waller, US Villemomble, FR Fiorenzuola D'arda, IT Helsinki, FL
None None None
Bearing Temperature Detector - RTD Type See 626
630
Bearing Temperature Detector - T/C Type See 626
631
Bearing Temperature Monitors 9COM- 6000002780 (CCC 340145) - Monitor: Temperature; 34-SAMSS-625 See category 626 for approved temperature monitor vendors.
632
Vibration Monitors - Seismic Type 9COM- 6000002875 (CCC 340244) - Vibration Monitoring System: Seismic Specification: 34-SAMSS-625 MANUFACTURER
BENTLY-NEVADA CORPORATION SKF CONDITION MONITORING, Metrix Instrument Company
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001527
MINDEN, US
None
30001915 30001911
SAN DIEGO, US Houston, TX , US
None None
Page 32 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
635
SAES-J-002 Technically Acceptable Instrument Manufacturers
Wellhead Shut Down Systems 635.1
9COM- 6000003611 (CCC: 450200)- Wellhead Emergency Shutdown System for Multi-well Offshore Applications Specification: 34-SAMSS-624
MANUFACTURER e Production Solutions e Production Solutions CAC LTD (eProduction) Halliburton Energy Services Controls & Electrics PTE LTD ALDERLEY FZE PROSERV ME
635.2
VENDOR/ PLANT ID 30001629 30003312 30001063 30001727 30003634 30003016 30003523
LOCATION Kingwood, US Dubai, AE UK Carrollton, US Jurong Town, SG Dubai, AE Dubai, AE
LIMITATIONS None None None None None None None
9COM- 6000003727 (CCC: 451545)- PANEL: HYDRAULIC; SSV/ SSSV; Single-Well Onshore Applications Specification: 34-SAMSS-624
MANUFACTURER Cooper Cameron e Production Solutions Halliburton Energy Svcs Baker Oil Tools Cameron Willis Wood Group Pressure Control (Barber Industries) Controls & Electrics PTE LTD ALDERLEY FZE PROSERV ME
635.3
VENDOR/ PLANT ID 30000051 30003312 30001727 30001524 30003622
UK Dubai, AE US Broken Arrow, US Houston, US
None None None None None
30002704
Edmonton, CA
None
30003634 30003016 30003523
Jurong Town, SG Dubai, AE Dubai, AE
None None None
LOCATION
LIMITATIONS
9COM- 6000003729 (CCC: 451546)- ACTUATOR: Surface Safety Valve; Hyd; Self Contained Actuator Specification: 34-SAMSS-624
MANUFACTURER Cooper Cameron Singapore Cameron France Baker Oil Tools Wood Group Pressure Control (Barber Industries) Stream Flo
VENDOR/ PLANT ID 30000018 30000036 30001524
Singapore France Broken Arrow, US
None None None
30002704
Edmonton, CA
None
30001950
EDMONTON, CA
None
LOCATION
LIMITATIONS
Page 33 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
700
SAES-J-002 Technically Acceptable Instrument Manufacturers
Valves 711
Control Valves; Globe CCC: 340230 (9COM- 6000002861) - Valve: Control; Globe; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100 MANUFACTURER
SEVERN GLOCON LTD.
FISHER NIPPON CO. LTD. FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORPORATION FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD DRESSER AL-RUSHAID Valves (Masoneilan) DRESSER PRODUCTS INDUSTRIES DRESSER ITALIA SPA
VENDOR/ PLANT ID 30001266
LOCATION GLOUCESTER,GB
LIMITATIONS Digital positioner to be supplied from other approved vendors None None
30001402 30001650 30001652 30002081
CHIBA,,JP Marshalltown, US SHERMAN, US SZEKESFEHERVAR, HU
30003833
NILAI, MY
None
30003023 30001513 30001265 30003943
CERNAY, FR SPRINGVILLE, US Haywards Heath, GB VILLACH, AT
None None None
30001611 30001391 30000428
AVON,US KARIWA-GUN, JP JUBAIL, SA
None None None
30001203
CONDE-SURNOIREAU, FR CASAVATORE, IT
None
30003077
None
None
Page 34 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
712
SAES-J-002 Technically Acceptable Instrument Manufacturers
Control Valves - Ball and Eccentric Plug (Characterized) CCC: 340227 (9COM- 6000002858) - Valve: Control; Ball; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100 MANUFACTURER
FLOWSERVE CORPORATION FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. NIPPON FISHER CO. LTD. METSO AUTOMATION OY MASONEILAN DIVISION DRESSER AL-RUSHAID VALVES (Masoneilan) DRESSER PRODUCTS INDUSTRIES
713
VENDOR/ PLANT ID 30001513 30001652 30001650
LOCATION
LIMITATIONS
SPRINGVILLE, US SHERMAN, US Marshalltown, US SZEKESFEHERVAR, HU
None
30003833
NILAI, MY
None
30003023 30001402 30003028 30001611
CERNAY, FR CHIBA,, JP HELSINKI, FI AVON, US
None None None None
30000428
JUBAIL, SA
None
30001203
CONDE-SURNOIREAU, FR
None
30002081
None None
Control Valves - Butterfly and Rotary Plug CCC: 340228 (9COM- 6000002859 ) - Valve: Control; Butterfly; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100 MANUFACTURER
NIPPON FISHER CO. LTD. FISHER CONTROLS Inc FISHER CONTROLS INCORPORATED Fisher Rosemount Hungary Ltd EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORP. FLOWSERVE CORPORATION MASONEILAN DIVISION DRESSER AL-RUSHAID VALVES (Masoneilan) METSO AUTOMATION OY
VENDOR/ PLANT ID 30001402 30001650 30001652
CHIBA, JP Marshalltown, US SHERMAN, US
None None None
30002081
Szekesfehervar, HU
None
30003833
NILAI, MY
None
30003023 30001265 30001513 30001611 30000428
CERNAY, FR Haywards Heath, GB SPRINGVILLE, US AVON, US JUBAIL, SA
None None None None None
30003028
HELSINKI, FI
None
LOCATION
LIMITATIONS
Page 35 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
714
SAES-J-002 Technically Acceptable Instrument Manufacturers
Control Valves - Severe and Non-General Service CCC: 340261 (9COM- 6000002891) - Valve: Control; Non-General Service including actuator, positioner and accessories Specification: 34-SAMSS-711 MANUFACTURER
SEVERN GLOCON LTD.
FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN FLOWSERVE CORPORATION MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. NIPPON FISHER CO. LTD. CONTROL COMPONENTS INCORPORATED MACHINEFABRIEK MOKVELD B.V.
DRESSER AL-RUSHAID VALVES (Masoneilan) DRESSER PRODUCTS INDUSTRIES
VENDOR/ PLANT ID 30001266
GLOUCESTER,GB
30001265 30003943
Haywards Heath, GB VILLACH, AT
30001513 30001611 30001391 30001650
SPRINGVILLE, US AVON, US KARIWA-GUN, JP MARSHALLTOWN, US SZEKESFEHERVAR, HU
None None None None
30003833
NILAI, MY
None
30003023 30001402 30001921
None None None
30001213
CERNAY,FR CHIBA, JP RANCHO SANTA MARGARITA, US GOUDA, NL
30000428
JUBAIL, SA
30001203
CONDE-SURNOIREAU, FR
30002081
LOCATION
LIMITATIONS Digital positioner to be supplied from other approved vendors None
None
Digital positioner to be supplied from other approved vendors None None
Page 36 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
715
SAES-J-002 Technically Acceptable Instrument Manufacturers
Control Valves; Angle CCC: 340224 (9COM- 6000002855) - Valve: Control; Globe Angel; including Actuator, Positioner & Regulator Specification: 34-SAMSS-711; IR340100 MANUFACTURER
SEVERN GLOCON LTD.
FISHER NIPPON CO. LTD. FISHER CONTROLS INCORPORATED FISHER ROSEMOUNT HUNGARY LTD EMERSON PROCESS MANAGEMENT/FISHER FISHER ROSEMOUNT S.A. FLOWSERVE CORPORATION FLOWSERVE CORP FLOWSERVE SCHMIDT ARMATUREN MASONEILAN DIVISION NIIGATA MASONEILAN CO LTD DRESSER AL-RUSHAID Valves (Masoneilan) DRESSER PRODUCTS INDUSTRIES DRESSER ITALIA SPA
716
VENDOR/ PLANT ID 30001266
GLOUCESTER,GB
30001402 30001650
CHIBA,,JP Marshalltown, US
30002081
SZEKESFEHERVAR, HU
None
30003833
NILAI, MY
None
30003023 30001513 30001265 30003943
CERNAY, FR SPRINGVILLE, US Haywards Heath, GB VILLACH, AT
None None None
30001611 30001391 30000428
AVON,US KARIWA-GUN, JP JUBAIL, SA
None None None
30001203
CONDE-SURNOIREAU, FR CASAVATORE, IT
None
30003077
LOCATION
LIMITATIONS Digital positioner to be supplied from other approved vendors None None
None
Valve Actuators; Pneumatic; On-Off CCC: 340271 (9COM- 6000002899) - Actuator: For Operating On/Off Valve; Air/Nitrogen Powered; Diaphragm Operated CCC: 340275 (9COM- 6000002903) - Actuator: For Operating Valve; Pneumatic Piston
Page 37 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
Specification: 34-SAMSS-716; IR341000 MANUFACTURER ROTORK FLUID SYSTEMS SRL ROTORK CONTROLS, INCORPORATED COOPER CAMERON VALVES ITALY SRL (LEDEEN) BETTIS ACTUATORS AND CONTROLS BETTIS CANADA LTD EPM BETTIS FRANCE METSO AUTOMATION OY BIFFI SPA
COSELLI, IT
None
30001913
ROCHESTER, US
None
30000231
VOGHERA, IT
None
30001531
WALLER, US
None
30001532 30003605 30003028
EDMONTON, CA VILLEMOMBLE, FR HELSINKI, FI FIORENZUOLA D'ARDA, IT HAYWARDS HEATH, GB Rivanazzano, IT
None None None
30001080
FLOWSERVE FLOW CONTROL UK VALVITALIA SPA
717
VENDOR/ PLANT ID 30000067
30000139 30003163
LOCATION
LIMITATIONS
None None None
Valve Actuators; Hydraulic and Electro/Hydraulic CCC: 340274 (9COM- 6000002902) Specification: 34-SAMSS-717 to purly hydraulic only
Dresser italia spa Biffi spa Bettis actuators and controls Bettis canada ltd EPM BETTIS FRANCE Rotork fluid systems srl Rotork controls, incorporated
VENDOR/ PLANT ID 30000231 30001080 30001531 30001532 30003605 30000067 30001913
REXA/Koso America
30003793
VALVITALIA SPA
30003163
MANUFACTURER
718
LOCATION
LIMITATIONS
Voghera, IT Fiorenzuola d'arda, IT Waller, US Edmonton, CA VILLEMOMBLE, FR Coselli, IT Rochester, US W. Bridgewater, MA, US Rivanazzano, IT
None On/off only On/off only On/off only None On/off only On/off only Throttling & on/off None
Valve Actuators – Electric 718.1
Electrical Actuators for Control Applications 9COM- 6000002901 (CCC 340273) - Actuator: For Operating Valve; Electric Motor
Page 38 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
Specification: 34-SAMSS-718; IR341000 MANUFACTURER E.I.M. Company, Inc BIFFI SPA Limitorque Corp AUMA ROTORK CONTROLS, INCORPORATED ROTORK CONTROLS LTD REXA/Koso America
718.2
VENDOR/ PLANT ID 30001622 30001080 30001801 30003193 30001913 30000069 30003793
LOCATION
LIMITATIONS
Missouri City, US FIORENZUOLA D'ARDA , IT LYNCHBURG, US Mullheim, DE ROCHESTER, US BATH, UK W. Bridgewater, MA, US
None None None None None None Throttling & on/off
Electrical Actuators for ESD/Wellhead Applications 9COM- 6000010821- Actuator: For Operating Valve; Electric Motor, Fail Safe Design Specification: 34-SAMSS-718
MANUFACTURER BIFFI SPA (EFS) ROTORK CONTROLS, INCORPORATED (EH) Cameron Halliburton (LEO)
719
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001080
FIORENZUOLA D'ARDA, IT
Fail-safe ESD
30001913
ROCHESTER, US
Fail-safe ESD
30003622 30001727
Houston, US Carrollton, US
Wellhead Wellhead
Regulators - Pressure and Flow 9COM- 6000002810 (CCC 340177) - Regulator: Pressure; Flow MANUFACTURER
Masoneilan International, Inc Dresser Al-Rushaid Emerson-Fisher Controls
720
VENDOR/ PLANT ID 30001611 30000428 30003758
LOCATION
LIMITATIONS
AVON, US Jubail, SA McKINNEY, US
None None None
Regulators - Temperature 9COM- 6000002811 (CCC 340178) - Regulator: Temperature MANUFACTURER
Amot Controls Corp ABB Leslie Controls Company
VENDOR/ PLANT ID 10003145 10018670 10017073
LOCATION
LIMITATIONS
Bury St Edmunds, GB Rochester, US Tampa, US
None None None
Page 39 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
721
SAES-J-002 Technically Acceptable Instrument Manufacturers
Control Valves: Axial Flow CCC: 340233 (9COM- 6000002864) - Valve: Control; Axial Flow (Straight Thru); Including Actuator, positioner and Regulator Specification: 34-SAMSS-711 MANUFACTURER
DANIEL VALVE COMPANY MACHINEFABRIEK MOKVELD B.V. Dresser Al-Rushaid
722
VENDOR/ PLANT ID 30001637
HOUSTON, US
None
30001213
GOUDA, NL
None
30000428
Jubail, SA
None
LOCATION
LIMITATIONS
Control Valves; Automatic Recirculation CCC: 340225 (9COM- 6000002856) MANUFACTURER
SCHROEDAHL ARAPP GMBH & CO. KG H. SCHROEDER & CO. GMBH & CO. KG Tyco Valves & Control-Yarway
723
VENDOR/ PLANT ID 30001261 30001260 30001812
LOCATION REICHSHOFMITTELAGGER, DE GUMMERSBACHELBACH, DE Stafford, TX, US
LIMITATIONS None None None
Control Valves; Desuperheating CCC: 340229 (9COM- 6000002860) – Valve: Control; Desuperheating; including Actuator, Regulator, Positioner Specification: 34-SAMSS-711 MANUFACTURER
Fisher Controls Masoneilan Division Dresser Al-Rushaid
VENDOR/ PLANT ID 30001650 30001611 30000428
LOCATION Marshalltown, US Avon, US Jubail
LIMITATIONS None None None
Page 40 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
800
SAES-J-002 Technically Acceptable Instrument Manufacturers
Panel Instrumentation 811
Controllers and Indicators – Analog 9COM- 6000002700 (CCC 340060) - Controller/Indicator: For Panel Mounting MANUFACTURER
Foxboro Co. ABB Automation Honeywell, Inc Yokogawa Electric Corp
812
VENDOR/ PLANT ID 30002059 10003364 30001743 30001465
LOCATION
LIMITATIONS
Foxboro, US ST NEOTS, GB Phoenix, AZ, US Japan
None None None None
Recorders 9COM- 6000002805 (CCC 340172) - Recorder: Chart MANUFACTURER
Foxboro Co. ABB Barton Instrument Systems Honeywell, Inc Yokogawa Electric Corp
813
VENDOR/ PLANT ID 30002059 10003364 10003760 30001743 30001465
LOCATION
LIMITATIONS
Foxboro, US ST NEOTS, GB BOGNOR, GB Phoenix, AZ, US Japan
None None None None None
Indicators - Multi-point, Thermocouple 9COM- 6000002753 (CCC 340115) - Indicator: Multi-point MANUFACTURER
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
Ametek-Rochester Instrument Systems Yamatake Honeywell, Inc Yokogawa Electric Corp THERMO ELECTRIC EUROPE BV
10002603
Dunfermline, GB
None
30001464 30001743 30001465
Kanagawa pref., JP Phoenix, AZ, US Japan
None None None
30001296
WADDINXVEEN, NL
None
WIKA INSTRUMENTS LIMITED
30004141 30003986
Edmonton, CA DE
None
Page 41 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
814
SAES-J-002 Technically Acceptable Instrument Manufacturers
Recorders - Multi-point 9COM- 6000002807 (CCC 340174) - Recorder: Multi-point MANUFACTURER
Yamatake Foxboro Co. (Invensys) Honeywell, Inc Yokogawa Electric Corp
815
VENDOR/ PLANT ID 30001464 30002059 30001743 30001465
LOCATION Kanagawa pref., JP Foxboro, US Phoenix, AZ, US Japan
LIMITATIONS None None None None
Annunciator Panel: Solid State And Plug-In Module CCC: 340033 (9COM- 6000002678) Specification: 34-SAMSS-815; IR343300 MANUFACTURER
RONAN ENGINEERING COMPANY RONAN ENGINEERING LIMITED RTK ENGINEERING LTD Ametek-Rochester Instrument Panalarm Division
817
VENDOR/ PLANT ID 30001909
LOCATION
LIMITATIONS
30003140
WOODLAND HILLS, US WASHINGTON, GB
None None
30003273 30001249 30001482
HARROGATE, GB Dunfermline, GB W CHICAGO, US
None None None
Graphic Displays 9COM- 6000002745 (CCC 340106) - Graphic Display: Mapboard and Process Diagrammatic MANUFACTURER
Ametek-Rochester Instrument ABB AUTOMATION LTD Ronan Engineering Co. RTK Engineering Mauell
VENDOR/ PLANT ID 30001249 10003364 30003140 30003273 10015046
LOCATION Dunfermline, GB St Neots, GB WASHINGTON,GB HARROGATE,GB Velbert, DE
LIMITATIONS None None None None None
Page 42 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
818
SAES-J-002 Technically Acceptable Instrument Manufacturers
Controllers – Field 9COM- 6000002703 (CCC 340063) - Controller: Field MANUFACTURER
Emerson Fisher Controls Foxboro Co. (Invensys) Ronan Engineering Co.
820
VENDOR/ PLANT ID 30001650 30002059 30003140
LOCATION
LIMITATIONS
MARSHALLTOWN,US Foxboro, US WASHINGTON, GB
None None None
Control Panels; Indoor; Hardware-only; Does Not include integrators CCC: 340057 (9COM- 6000002697) Specification: 34-SAMSS-820 Commentary note in paragraph 5.3 applies.
821
Control Panels; Outdoor; Hardware-only; Does Not include integrators CCC: 340058 (9COM- 6000002698) Specification: 34-SAMSS-821 Commentary note in paragraph 5.3 applies.
822
Single Loop Controllers 9COM- 6000002706 (CCC 340066) - Controller: Microprocessor MANUFACTURER
Emerson Process Management Foxboro Co. (Invensys) Honeywell, Inc Yokogawa Electric Corp
VENDOR/ PLANT ID 10003636 30002059 30001743 30001465
LOCATION Leicester, GB Foxboro, US Phoenix, AZ, US Japan
LIMITATIONS None None None None
Page 43 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
825
SAES-J-002 Technically Acceptable Instrument Manufacturers
Relays - Electro-magnetic 9COM- 6000002812 (CCC 340179) - Relay: Electro Magnetic MANUFACTURER
Tyco – Potter and Brumfield Cutler Hammer Omron Phoenix Contacts Allen Bradley/Rockwell Automation
826
VENDOR/ PLANT ID 10019820 10017874 10004446 10004060 10021204
LOCATION Winston, US Milwaukee, US Schaumburg, IL USA Blomberg, DE Brussels, Belgium
LIMITATIONS None None None None None
Relays – Pneumatic 9COM- 6000002813 (CCC 340180) - Relay: Pneumatic
Emerson-Fisher Controls Co.
VENDOR/ PLANT ID 30001650
Fairchild Industrial Products Co.
10018199
Siemens- Moore Products
10002425
Marsh Bellofram
60007017
MANUFACTURER
827
LOCATION
LIMITATIONS
Marshalltown, US 3920 West Point Blvd. • Winston-Salem, NC 27103 Yeovil 9 Castle Park Queens Drive, Nottingham NG2 1AH
None None None None
Solenoid Valves 9COM- 6000002871 (CCC 340240)- Valve: Solenoid Operated MANUFACTURER
Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Circle Seal Controls Maxseal (FCX Thompson Valves Parker-Skinner Valve Division Versa Valves
VENDOR/ PLANT ID 10000358 10018037 10004648 10023208 10003159 10024829 10022525
LOCATION Scherpenzeel, NL Florham, US Japan Corona, CA, US Dorset, UK New Britain, US PARAMUS, US
LIMITATIONS None None None None None None
Page 44 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
828
SAES-J-002 Technically Acceptable Instrument Manufacturers
Transducers - Signal Conversion 9COM- 6000002848 (CCC 340217) - Transducer: Signal Conversion 828.1
(I/P) Transducers
MANUFACTURER Emerson-Fisher Controls Co. ABB instrumentation Ltd ABB Automation Foxboro Co. (Invensys) MASONEILAN DIVISION DRESSER AL-RUSHAID VALVE AND
VENDOR/ PLANT ID
30000428
Moore Products (Siemens)
828.2
LIMITATIONS
All Locations Accepted
None
All Locations Accepted
None
All Locations Accepted All Locations Accepted
None None
JUBAIL, SA
None
http://www.sea.siemen s.com/ia/default.html
None
LOCATION
LIMITATIONS
All Locations Accepted All Locations Accepted All Locations Accepted
None None None
E/I Transducers
MANUFACTURER
VENDOR/ PLANT ID
Foxboro Co. (Invensys) Honeywell, Inc. Rochester Instrument Co.
829
LOCATION
Pilot Valves 9COM- 6000002918 (CCC 340291) - Valve: Pilot MANUFACTURER
Automatic Switch Co. (ASCO) Automatic Switch Co. (ASCO) Versa Valves
VENDOR/ PLANT ID 10000358 10004648 10022525
LOCATION Scherpenzeel, NL Japan PARAMUS, US
LIMITATIONS None None None
Page 45 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
830
SAES-J-002 Technically Acceptable Instrument Manufacturers
Controller; Programmable Logic CCC: 340068 (9COM- 6000002708) Specification: 34-SAMSS-830, IR344000 MANUFACTURER
SIEMENS AG-A&D AS EWK GE FANUC AUTOMATION ALLEN BRADLEY/ROCKWELL AUTOMATION ABB INSTRUMENTATION AEG SCHNEIDER AUTOMATION INC. Honeywell HC900
VENDOR/ PLANT ID 30003832
LOCATION
30001686 30001908
Charlottesville, US Mayfield Heights, US
30001252 30001468
Pero, IT North Andover, US
Yokogawa Stardom
831
LIMITATIONS S7-400 Series Only None None None None Can be used as a hybrid controller for systems with less than 50 PID loops. P&CSD review and approval for hydrocarbon facilities. Can be used as a hybrid controller for systems with less than 50 PID loops. P&CSD review and approval for hydrocarbon facilities.
Package Unit Instrumentation Commentary note in paragraph 5.3 applies. Mandatory requirements are specified in 34-SAMSS-831.
900
Installation 904
Foundation Fieldbus (FF) Power Supplies 9COM- 6000010825
Page 46 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
Specification: Mandatory requirements are perSAES-J-904
MTL/Relcom Inc. MTL/Relcom Inc
VENDOR/ PLANT ID 10005043 10001178
Pepperl & Fuchs,
10015196
MANUFACTURER
905
LOCATION Luton, UK Demmel, NL Mannheim-Schonau, DE
LIMITATIONS None None None
Foundation Fieldbus (FF) Wiring Blocks 9COM- 6000010781 Specification: Mandatory requirements are per SAES-J-904 MANUFACTURER
MTL/Relcom Inc. MTL/Relcom Inc Pepperl & Fuchs, Moore Industries/Moore Hawke
906
VENDOR/ PLANT ID 10005043 10001178 10015196 10020228
LOCATION Luton, UK Demmel, NL Mannheim-Schonau, DE North Hills, US
LIMITATIONS None None None None
Foundation Fieldbus (FF) Terminators 9COM- 6000010826 Specification: Mandatory requirements are per SAES-J-904 MANUFACTURER
MTL/Relcom Inc. MTL/Relcom Inc
VENDOR/ PLANT ID 10005043 10001178
LOCATION Luton, UK Demmel, NL
LIMITATIONS None None
Page 47 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
911
SAES-J-002 Technically Acceptable Instrument Manufacturers
Junction Boxes – Electrical 9COM- 6000000794 (CCC 150002) - Box: Junction; Aluminum, Steel, Iron, Plastic or Fiberglass; Bodies and Components 9COM- 6000000830 (CCC 150056) - Box: Junction; Explosion Proof
Crouse Hinds Co. Hawa Electric Panel
VENDOR/ PLANT ID 10017271 10012799
Hoffman
10020718
MANUFACTURER
Hubbell Wiegmann Remal Factory Rittal Weidmuller
912
http://www.h ubbellwiegmann.c om/ 10013570 30003116 10002330
LOCATION
LIMITATIONS
Syracuse, US Dammam, SA 2100 Hoffman Way, Anoka, MN, US
None None
St. Louis, MO, US
None
Khobar, SA Herborn Kent, UK
None None None
None
Junction Boxes – Pneumatic 9COM-6000010824 Specification: 34-SAMSS-821 MANUFACTURER
Bebco Industries Sitek
VENDOR/ PLANT ID 60006448
LOCATION
LIMITATIONS None None
Page 48 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
913
SAES-J-002 Technically Acceptable Instrument Manufacturers
Instrument Wire and Cable 9COM- 6000000805 (CCC: 150015)- Cable: Instrumentation & Thermocouple; per 34-SAMSS-913 9COM- 6000002686 (CCC 340041) - Cable: Instrumentation & Control; per 34-SAMSS-913 Specification: 34-SAMSS-913; IR347600 MANUFACTURER
KERPENWERK GMBH AND CO MIDDLE EAST SPECIALIZED CABLES CO. TE WIRE AND CABLE LLC* BELDEN WIRE & CABLE BELDEN (CANADA) INC.
VENDOR/ PLANT ID 30000017
STOLBERG,DE
None
30000660
RIYADH,SA
None
30003774 30001526 30003545
Saddle Brook, US RICHMOND,US COBOURG,CA MOUNT PLEASANT,US ASHTON,US Hyogo Pref., JP
None None None
DEKORON WIRE AND CABLE
30001824
THE OKONITE COMPANY OKAZAKI MANUFACTURING
30001857 30001422
*
LOCATION
LIMITATIONS
None None None
Thermo Electric Wire and Cable LLC was spun off Thermo Electric Co Inc (30001963). A new SAP manufacturer ID is required for the Cable company.
915
Tubing; Metallic 9COM- 6000000028 (CCC 010029) - Tubing: Alloy 9COM- 6000000068 (CCC: 010206) – Tubing Metallic; Stainless Steel MANUFACTURER
SCHOELLER-BLECKMANN AVESTA SANDVIK TUBE AB AVESTA POLARIT STAINLESS TUBE AB SANDVIK MATERIALS TECHNOLOGY AB SANDVIK STEEL CANADA SANDVIK TUBULAR PRODUCTS SUMITOMO METAL IND. HANDY & HARMAN INCORPORATED ASSOCIATED TUBE INDUSTRIES The Indian Seamless Metal Tube
VENDOR/ PLANT ID 30000064 30000208
TERNITZ, AT STORFORS, SE
None None
30003548
FAGERSTA, SE
None
30001254
SANDVIKEN, SE
None
30003143
ARNPRIOR, CA
None
30003519
CLARKS SUMMIT, US
None
30001449
AMAGASAKI-SHI, JP
None
30001729
NORRISTOWN, US
None
30001916
MARKHAM, CA
None
10012889
Pune, IN
None
LOCATION
LIMITATIONS
Page 49 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
SAES-J-002 Technically Acceptable Instrument Manufacturers
916
Sun Shades (DELETED)
918
Cable and Support Tray 9COM- 6000000744 (CCC 140009) - Cable Tray: Aluminum 9COM- 6000000775 (CCC 140044) - Cable Tray: Fiberglass MANUFACTURER
SAUDI ELECTRIC INDUSTRIES COMPANY M. P. HUSKY COOPER B-LINE, INCORPORATED ABAHSAIN-COPE SAUDI ARABIA LIMITED WAHA ELECTRIC SUPPLY COMPANY OF
919
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30000881
JEDDAH, SA
None
30003168
GREENVILLE, US
None
30002063
HIGHLAND, US
None
30000242
DHAHRAN, SA
None
30001034
DAMMAM, SA
None
Valve: Instrument 9COM- 6000000304 (CCC 040115) - Valve: Instrument MANUFACTURER
Tyco-Anderson Greenwood Instrumentation Hoke, Inc Oliver Valves Limited Merwede Valves Parker Hannifin Parker Hannifin Swageloc Highland HY-LOK CORPORATION
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
30001781
Harlingen, US
None
30002062 30000035 30001208 10002440 30001868 30001581 30004251
Spartanburg, SC, USA Knutsford, GB Hardinxveld, NL UK Jacksonville, AL, US Highland, OH, US Busan, KR
None None None None None None None`
Page 50 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
920
SAES-J-002 Technically Acceptable Instrument Manufacturers
Valve Manifolds for Instrument-Process Interface 9COM- 6000002768 (CCC 340131) - Manifold: Instrument or Pressure Note: Manifolds supplied by the approved transmitter manufacturers are acceptable MANUFACTURER
VENDOR/ PLANT ID
LOCATION
LIMITATIONS
Tyco-Anderson Greenwood Instrumentation Hoke, Inc Oliver Valves Limited Parker Hannifin Parker Hannifin
30001781
Harlingen, US
None
30002062 30000035 10002440 30001868
None None None None
Vesta-PGI-Manufacturing
10022527
HY-LOK CORPORATION
30004251
Spartanburg, SC, USA Knutsford, GB UK Jacksonville, AL, US 16101 Vallen Dr., Houston, TX 77041 Busan, KR
921
None None
Air Filter – Regulators 9COM- 6000002809 (CCC 340176) - Regulator: Air-Filter
Emerson-Fisher Controls Co.)
VENDOR/ PLANT ID 30001650
Fairchild Industrial Products Co.)
10018199
IMI Norgren
10021386
MANUFACTURER
Marsh Bellofram
60007017
Parker Hannifin
10020634
LOCATION
LIMITATIONS
Marshalltown, US 3920 West Point Blvd. • Winston-Salem, NC 27103
None
Littleton, US
None
9 Castle Park Queens Drive, Nottingham, NG2 1AH Hermitage Lane, Maidstone, Kent, ME16 9NT, UK
None
None
None
Page 51 of 52
Document Responsibility: Instrumentation Issue Date: 28 May 2007 Next Planned Update: 1 July 2010
922
SAES-J-002 Technically Acceptable Instrument Manufacturers
Tubing Fittings 9COM- 6000000221 (CCC 030015) - Fitting: Tubing; 316 SS Flared 9COM- 6000000208 (CCC 030001) - Fitting: Tubing; 316 SS FLARELESS/COMPRESSION MANUFACTURER
28 May 2006 26 March 2007 28 May 2007
VENDOR/ PLANT ID
Crawford Fitting Co. (Swagelok)
30001581
Parker Hannifin (CPI & A-Lok) Hoke Incorporated (Gyrolok) Parker Hannifin (CPI & A-LOK) Parker Hannifan HY-LOK CORPORATION
30004267 30002062 10032873 30001868 30004251
LOCATION HIGHLAND HEIGHTS, US BARNSTAPLE, UK SPARTANBURG, US MAINZ-KASTEL, DE JACKSONVILLE, US Busan, KR
LIMITATIONS None None None None None None
Revision Summary Major revision. Minor revision to change the title and update vendor approvals. Minor revision to update vendor approvals.
Page 52 of 52