Remove wedges and lashing devices completely before unloading. Unblock steering system by unblocking the articulated frame steering block. All safety devices removed for transport purposes (anti-rollover device ROPS, handles, silencers etc.) must be installed to the machine prior to using it. Drive the roller slowly and carefully from the loading area.
Load securing • Position 2 wedges at each axis, as far to the outside as possible, flushing with drum or tire, and fix them with 3 nails each to the loading area. • The lashing devices A and B must be fixed to the lashing point of the machine and at the vehicle. The permitted tractive force must be at least 4000 daN also at the lashing point. The arrangement of the lashing devices shown in the figure must be realised on both sides.