Champion 700 Series Parts Quick Reference GuideDescripción completa
Quick Reference Guide Musescore 2 0 Cheatsheet
Audi A4 B6 2001-2004
3-A Sanitary Standards - Quick Reference GuideFull description
Debenu Quick PDF Library Reference
Quick Reference Guide
Analyzing Results Manually
Understanding the Summary View
OTDR
The Summary view is useful to see the results of your acquisition at a glance. The Measure tab Measure tab lets you set the markers and measurement type according to your needs to see specific results.
Optical Time Domain Reflectometer
You can access it by tapping the Summary tab. Summary tab. Test status
Testedwavelengths
3
Graph overview window
Adjusting Test Configuration
Move the marker to the desired location (either point and drag the marker on-screen or use the arrow buttons).
Before starting your acquisition, you should adjust the configuration for your test.
Test details Results
Select the marker to use.
To switch between detailed and condensed views
Span length of the link
2 Select measurement type.
1
Tap to create an event manually.
Macrobend information
The icons below represent the possible event types for your test results:
Saves file
Previous wavelength
Select to what items the changes apply.
Understanding the Event Table Icons
Shortcut Buttons
Opens file
2
Span start
Positive end
Span end
Launch level
Continuous fiber
Fiber section
End of analysis
Merged event
Non-refl ective event
Echo
Reflective ev event
Refl ective event (p (possibl e echo)
1 Generates a report on demand.
Next wavelength
Tap.
3
Switches between displaying single trace or all traces.
Select which items are included in the pass/fail thresholds, and set the corresponding value.
2
The Auto button Auto button is there to help you quickly set the unit by automatically evaluating the best acquisition settings according to the fiber link currently connected to the unit. The settings selection is performed when you tap Start. Start.
Select to what items the changes apply (event or fiber lengths).
Note: When using the Auto settings settings feature, the Pulse s e and Distance dials in the window are not available. available.
Select the item to modify.
4
3
Modify as needed.
To keep the auto-settings activated once an acquisition is done
Tap to select the Auto-Setting mode.
Tap to copy the values to other wavelengths.
5 5
Tap.
Using Real-Time Mode
Tap.
Using the Averaging Mode
Defining Launch and Receive Fibers The launch and receive fibers are used to characterize the first and last connectors on the fiber. They help you define the actual span start and end.
3 Set other parameters using the dials.
Tap Start. Start.
2
1
Tap Start RT. RT. To interrupt acquisition at any time, tap Stop RT. RT.
1 Select test wavelengths. Depending on your OTDR model, you can select the port as well. To set the period over which results are averaged. Generally, the longer the time, the cleaner the trace.
Tap.
4
To interrupt acquisition at any time, tap Stop. Stop.
Select test wavelengths. Depending on your OTDR model, you can select the port as well.
1
In Real-time mode, the unit monitors the fiber link and indicates any changes that occur immediately. This mode is available for only one wavelength at a time.
In Averaging mode, the unit performs a series of acquisitions according to the distance, pulse width and time span, and averages the results on-screen.
A longer pulse travels farther down the fiber, but provides less resolution.
Not all pulse widths are c ompatible with all distance ranges.