Chemical Injection Pump Depends on the varied nature of the Chemical injections are used for many well effluent, there are instances purposes including Prevention of hydrate formation where the produced fluid has to be Cure forming problems treated with different chemicals. Reduce H2S content Reduce wax buildup Reduce surface tension
An air driven, skid mounted stand Texsteam 5000 series are positive alone construction of High Pressure, displacement type units powered by Low Volume pumps are used for this integral gas motors. These injectors fill purpose. the requirements of a broad range of applications because of their ability to Production Testers International uses achieve high discharge pressure (to Texsteam Positive Displacement 20,000 psi) and wide volume ranges. A pumps which are capable of self feed horizontal plunger and a vertical resilient from chemical tanks/barrels and have valve arrangement assures high common NPT inlet/outlet connections. operating efficiency.
These pumps can also be used to perform pressure testing of the surface equipment.
Texsteam Series 6111
PTIMS-OPS-DS-013 Page 1
Texsteam Series 5000
EQUIPMENT DATA SHEET
C hemic al Injection Pumps - SPECIFICATION Pump Type
Speed Flow Air / Gas strokes/ Rate Requirement min Galls/day scf/d 3
(m /day)
3
(m /day)
Piston Length & Diameter -ins (mm)
Fluid Dimensions Discharge (h x l x w) Pressure ins psi (bar)
Connections
(mm)
Type A - T exs team S eries 5000 Positive Displacement
75
9 - 626 (0.03 2.4)
13.6 - 522 (0.4 - 14.8)
short & long 10,000 stroke lengths (690) dia. ¼ - 1¼ (6.35 - 31.75)
