INSTRUCTION / INSTALLATION MANUAL
< Optional Software >
FRONTIER WORKFLOW MANAGEMENT SOFTWARE LAN SPOOL SOFTWARE
LAN Spool Software (MS13) Ver.1.0 or later Basic Software (MS01) Ver.2.5.5 or later
Fourth Edition Ref.No. PP3-B1277E4
INTRODUCTION ••This instruction manual explains the procedures for operating and maintaining the LAN Spool Software (MS13) for the Imaging Controller III (ICIII). ••To ensure proper use and optimum performance of the software, read this manual thoroughly. ••This manual should be kept in a fixed place near the machine so that it can be referred to any time a point needs to be clarified.
** Specifications are subject to change without notification. ** Microsoft, Windows are registered trademarks of the Microsoft Corporation. ** Macintosh is registered trademark of the Apple Computer Incorporated. ** Adobe and Photoshop are registered trademarks of the Adobe Systems Incorporated. ** All other brand names or trademarks are the property of their respective owners.
1. Electro-optical-mechanical reproduction of this manuscript is strictly forbidden. 2. Product innovations may result in specification changes without prior notice.
CONTENTS 1
2
3
4
Overview of the LAN Spool Software (MS13)............................................................. 4 1.1
Hot Folder Print Function................................................................................................................... 4
1.2
JOB File Print Function....................................................................................................................... 5
1.3
Specification of the MS13 Software................................................................................................... 5
Installing the DI Simple Print Software....................................................................... 6 2.1
Preparations for Installation............................................................................................................... 6
2.2
Installing the Software........................................................................................................................ 7
Installing the JOB File Print Service Software........................................................... 9 3.1
Installing the Windows Version.......................................................................................................... 10
3.2
Installing the Macintosh Version........................................................................................................ 12 3.2.1.
Preparations for Installation................................................................................................. 12
3.2.2.
Installing the Software.......................................................................................................... 12
Setting the LAN Spool Software (MS13)..................................................................... 13 4.1
Setting for DI Simple Print Software.................................................................................................. 13
4.2
Setting for the Hot Folder Print Function........................................................................................... 16 4.2.1. The Sample Environment of the Hot Folder Print Function................................................. 16 4.2.2. Creating and Modifying Hot Folders.................................................................................... 16
5
Using the LAN Spool Software (MS13)....................................................................... 21 5.1
Hot Folder Print Function................................................................................................................... 21 5.1.1.
5.2
Print Orders.......................................................................................................................... 21
JOB File Print Function....................................................................................................................... 22 5.2.1. Print Orders from the JOB File Print Service Software (Windows Version)........................ 22 5.2.2. Print Orders from the JOB File Print Service Software (Macintosh Version)...................... 23
6
File Specifications......................................................................................................... 26 6.1
JOB File Print Function....................................................................................................................... 26 6.1.1.
Condition.txt......................................................................................................................... 26
6.1.2.
End.txt.................................................................................................................................. 27
6.1.3.
FdiaDevice.ini....................................................................................................................... 28
7
Error Messages.............................................................................................................. 29
8
Uninstalling the LAN Spool Software (MS13)............................................................. 30 8.1
Uninstalling the DI Simple Print Software.......................................................................................... 30
8.2
Uninstalling the JOB File Print Service Software............................................................................... 32 8.2.1. Uninstalling the Windows Version........................................................................................ 32 8.2.2. Uninstalling the Macintosh Version...................................................................................... 32
9
Index................................................................................................................................ 33
3
1 Overview of the LAN Spool Software (MS13) LAN Spool Software (referred to as “the MS13 software” below) provides two print functions, the Hot Folder Print function and the JOB File Print function. By using these functions, image files in client PCs can easily be output to the printer.
1111
Hot Folder Print Function
The Hot Folder Print function is used to create a share folder on the ICIII, enabling it to be shared and used for storing print conditions. A share folder must be created for each output device, each print size and each set of printing conditions. By copying (through “save as” or by “drag and drop”) the image files to be printed into the appropriate share folder, the images are then read in by the MS13 software during a periodic scan of the folders. The MS13 software then registers a print order for those images to the ICIII. In this way, the MS13 software, which requires no other application software to operate, allows users to create prints from a PC connected via a network to the ICIII.
MS13
Client PC
4
IC III
Printer
1111
JOB File Print Function
The JOB File Print function is used to create a spool folder on the ICIII, enabling it to be shared. It then copies to that spool folder specified image files and other files (JOB file and END file) containing printing information for those images. The images are read in by the MS13 software during a periodic scan of the folders. The MS13 software then registers a print order for those images to the ICIII. To use the JOB File Print function, normally Client Software must be installed on the user PC. A standard Client Software package, named “JOB File Print Service Software” (Windows/Macintosh version) is bundled to the MS13 software.
Dedicated Spool Folder
MS13
Image (JOB File) Print size Q'ty, etc
JOB File Print Service Software Client PC
1111
IC III
Printer
Specification of the MS13 Software
•• Image File Formats Supported by the MS13 Software The MS13 software supports the printing of four different image formats: Exif-JPEG, JPEG, BMP (Windows 24-bit) and Exif-TIFF. Note: The MS13 software does not support files having an extension consisting of four characters such as “.jpeg” and “.tiff”.
•• Operating Conditions The MS13 software operates with the MS01 Basic Software on the ICIII.
5
2 Installing the DI Simple Print Software 2222
Preparations for Installation
The DI Simple Print Software runs on the ICIII. The following illustration shows the standard ICIII configuration with the MS01 Basic Software installed. IC III
C Drive: OS (Windows XP Professional)
D Drive: MS01 Basic Software
Confirm that the following conditions are fulfilled before installing the DI Simple Print Software: (1) The HDD drives are C and D. (2) OS is installed in the C drive and the MS01 Basic Software is installed in the D drive. When the above conditions are fulfilled, install the MS13 software to drive C and create the MS13 software spool folder (C8Spool) in the root directory of drive D.
6
2222
Installing the Software
Use the following procedure to install the MS13 software in the ICIII.
11 22
55
Confirm that the ICIII is running normally.
In the “FUJIFILM Log-Off” dialog box, enter “operator” for “Password” and then click the [OK] button. 1. Enter “operator”
2. Click
Insert the “LAN Spool Software (MS13)” CD into the CD-ROM drive of the ICIII.
Install MS13 Software Client PC
Windows
••The system logs off the current mode and then logs in to the selected mode automatically. Wait for a while since this operation requires several minutes. ••The “LAN Spool Software (MS13)” installer starts up automatically.
ICIII
66
Printer
The “MS13 L AN Spool Sof t ware” screen appears. Select “DI Simple Print Software” and then click the [Install] button.
Macintosh
33
Click the [Tools] button in the “View Orders” screen. Click
Select “DI Simple Print Software”.
77
44
Click
The program installer starts up. To begin the installation process, click the [Next] button.
Click the [LOG OFF] button in the “MS01” dialog box.
Click
Click
7
88
Select the software installation destination. Normally, use “C:\SimIn\” as is and click the [Next] button.
111 When the installation has completed, the
following screen appears. Remove the “LAN Spool Software (MS13)” CD from the CD-ROM drive of the ICIII, select “Yes, I want to restart my computer now”, and then click the [Finish] button to restart the computer.
Click
99
Verify that the installation conditions are proper, and then click the [Next] button. The program is installed.
Click
8
Select
Click
3 Installing the JOB File Print Service Software Windows and Macintosh versions of the JOB File Print Service Software are provided for the following OS versions. n Operating Environment xx Windows: NT4, 2000 Professional or XP Home/Professional xx Macintosh: OS 9.04 or above (except MacOS X) Both versions are included in the “LAN Spool Software (MS13)” CD. n Installation Procedure xx For Windows: See Section 3.1. xx For Macintosh: See Section 3.2.
Client PC IC III
Windows
Printer
Macintosh
9
3333
11 22 33 44
Installing the Windows Version
77
Turn ON the client PC. Insert the “LAN Spool Software (MS13)” CD into the CD-ROM drive of the client PC.
The “MS13 L AN Spool Sof t ware” screen app e a r s. Sele c t “JOB File Pr int Se r vic e Software” and then click the [Install] button.
In the Windows desktop screen, click the [Start] button and then select “Run”. In the “Run” dialog box, click the [Browse] button. Select “JOB File Print Service Software”
88
Click
The program installer starts up. To start the installation process, click the [Next] button.
Click
55
In the “Browse” dialog box, specify the CDROM drive, select “Setup.bat” and then click the [Open] button.
Click
99
Select the software installation destination and then click the [Next] button. ** Normally, use “C:\ MrPrint” as is.
1. Select
66
2. Click
In the “Run” dialog box, click the [OK] button.
Click Click
10
111 Enter the machine name of the ICIII on which the “DI Simple Print Software” is installed, and then click the [Next] button. Normally, the machine name is “FEII-FRONTEND”.
111 When the installation has completed, the
following screen appears. Remove the “LAN Spool Software (MS13)” CD from the CD-ROM drive of the client PC, select “Yes, I want to restart my computer now”, and then click the [Finish] button to restart the computer.
Click
111 Verify that the installation conditions are proper,
1. Select
2. Click
and then click the [Next] button. The software is installed.
Click
11
3333
Installing the Macintosh Version
333333 Preparations for Installation
11
22
Double click the [Installer] icon to display the following.
Create a network environment that allows access to the MS13 software share folder (“C8Device” and “C8Spool”) to be created in the MS13 installation from a Macintosh connected to the ICIII over a network.
Click
22
Create a folder on the Macintosh’s hard disk to which the JOB File Print Service software will be installed. The following illustration shows the folder (JOB FILE Print) on the desktop to be used for the installation.
33
333333 Installing the Software
11
12
The CD containing the MS13 software is a hybrid CD. Insert the “LAN Spool Software ( MS13)” CD into the CD-ROM drive of the Macintosh, and then double click the icon. The items in the CD appear on the screen as follows.
Select the installation folder created in Step 2 of Section 3.2.1, and double click the [Select Folder] button to start installation.
Double-click
44
When installation is completed, the following “Install succeed completely” message appears. Click the [OK] button to complete the installation.
4 Setting the LAN Spool Software (MS13) 4444
Setting for DI Simple Print Software
After the MS13 software is installed, the ICIII is automatically restarted and MS13 software is started up. Perform the following procedure to set the default values and operation environment of MS13.
11
22
Click the SWLauncher button on the lower right-hand side of the screen to open the application selection buttons.
The “Administrative Settings” window appears.
Click the application star tup button repeatedly until the [LAN Spool Software] icon is selected and then click the start up the MS13 software.
33
55
button to
When the “DI Simple Print Software” dialog box appears, click the [Pause] button.
Click
44
Click the [Admin.] button.
Click
Set the default values and operation environment of MS13.
13
Detail of Settings 1
No.
Items
2
1
Intervals
Enter the interval time in seconds. At intervals, the MS13 scans the folders for the presence of image data and registers an order to Frontier.
2
Output Device
Select PICsRGB or PICPD as the default color space setting. PICsRGB: Using sRGB color space. PICPD: Using PD ( Printer-Depended) color space.
3
Print Size
Specify the desired print size as the default setting. This setting is used when the print size is not input in JOB File. * When the ASK-2000/4000 is connected to the MS system, set “89C”, “5R” or “A4” depending on the printable size.
4
Print Q’ty
Specify a number of prints as the default value. (1 to 999)
5
Back Print
Print Specify the back printing information as the default setting. File Name: Order No. + File name + 2nd line (text string) None: No back printing Free Text: Any text string can be entered for 1st and 2nd line. (Up to 40 characters can be entered in both the 1st and 2nd lines.)
6
Resize
Select a resize method from among Fillin, Fit-in and No Resize as the default setting. Fill-in: Fills the entire print size with the selected image. Fit-in: Fits the image within the print size as well as possible without cutting off any of the image. No Resize: Prints the image data without any resizing. *For details on resize settings, see the Operating Instructions for the Basic Software (MS01).
7
“DSC Correc.”
When using the DSC correction, place a check [ü] in the box.
8
Save Image
Do not change the default setting.
9
Save to
Do not change the default setting.
3 4 5
6 7 8 9
14
Description
66 77
99
Click the [OK] button. Click the [Tools] button in the “View Orders” screen.
In the “FUJIFILM Log-Off” dialog box, enter “operator” for “Password” and then click the [OK] button. 1. Enter “operator”
2. Click
Click
••The system logs off the current mode and then logs in to the selected mode automatically. Wait for a while since this operation requires several minutes. ••The MS01 software restarts automatically.
111 Click the [Start] button. 88
Click the [LOG OFF] button in the “MS01” dialog box. Click
Click
15
4444
Setting for the Hot Folder Print Function
444444 T he Sample Environment of the Hot Folder Print Function
22
“4R” and “10x12” folders are created as internal folders for the Hot Folder Print function.
The following Sample Environment is constructed when the MS13 is installed.
11
33
A folder with the path specified in “Hot Folder” is created as a shared folder with the shared name “C8Hot”.
The printing settings for the above folders are shown below.
No.
Items
D:\C8Hot\4R
1
Color space (Output Device)
PICsRGB
PICsRGB
2
Print CH name
4R
10 x 12
3
Print quantity
1
1
4
Backprinting
FILE
FILE
5
Resize specification
FILLIN
FILLIN
6
2nd line of backprinting
1st Test HotFolder
1st Test HotFolder
7
DSC auto correction
TRUE (ON)
TRUE (ON)
8
Save Image
TRUE (No Save)
TRUE (No Save)
444444 Cr eat ing a nd Modi f y ing Hot Folders With the Hot Folder Print function, it is possible to produce prints in the 4R and 10 x 12 sizes within the sample environment. To produce prints in other sizes, you must create folders for those respective sizes using “FAView.exe” provided for creating and modifying such folders.
11
D:\C8Hot\10x12
22 33
Click the SWLauncher button on the lower right-hand side of the screen to open the application selection buttons.
When the “DI Simple Print Software” dialog box appears, click the [Pause] button.
Click
44 16
Click the application star tup button repeatedly until the [LAN Spool Software] icon is selected and then click the button to start up the MS13 software.
In the Windows desktop screen, click the [Start] button and then select “Run”.
55
In the “Run” dialog box, enter “C:\SimIn\Tool\ FAView\ FAView.exe” and then click the [OK] button.
22
Enter the path name for the folder to be created (normally, “D:\C8Hot\***”), and then click the [OK] button. (The name of the folder should be one that is easy to understand, for example, the same name as the print size).
Click
44444444 Creating a New Shared Folder
33
Modify the contents of the “Spool Path Setting” section.
Use the following procedure to create a new folder.
11
Click the [Add] button.
••All changes made with this tool are done manually. Refer to the specifications for the “Spool Path Setting” section shown in the following table and enter the values, taking care not to make a mistake.
Click
“Spool Path Setting” section Specifications No.
Items
Details
Notes
1
Outputdevice
Setting the FRONTIER color space as “PICsRGB” or “PICPD”.
2
Printsize
Specifies the print sizes that are displayed when clicking the [Display Size Table] button in Menu 0211 “FDIA DB Manage”.
Required
3
Print Q’ty
Number of prints (1 to 999).
Required
4
Resize
FILLIN, FITIN, NONE FILLIN (Fill-in): Fills the entire print size with the selected image. FITIN (Fit-in): F its the image within the print size as well as possible without cutting off any of the image. NONE (No Resize): Prints the image data without any resizing.
Required
*For details on resize settings, see the Operating Instructions for the Basic Software (MS01). 5
DSC Correc.
TRUE ( DSC correction per formed ) , FALSE ( DSC correction not performed). Correction is done automatically only for Exif-JPEG and Exif-TIFF files. It is possible to turn the correction function on or off.
17
No.
Items
Details
Notes
6
Order check
FALSE (Hot Folder), TRUE (JOB File Print) (Specify “FALSE” for “Hot Folder”.)
7
Backprint
FILE: The order number (date) + file name + 2nd line (text string). Required FREE: Any text string can be entered for the 1st line and 2nd line on the back of prints. NONE: No back printing.
8
1st Line
1st line on the back of prints (Maximum of 40 alphanumeric characters)
9
2nd Line
2nd line on the back of prints (Maximum of 40 alphanumeric characters)
10
Delete Image
TRUE: I mage data of an order is not stored after the print order is Required registered. FALSE: Image data of an order is saved after the print order is registered.
11
Save to
The location where image data is saved to after the print order is registered.
44
Click the [Regist] button to register the settings.
66
Required
Required when “FALSE” is specified for “Delete Image.”
Click the [Tools] button in the order screen. Click
Click
55
Click the [Cancel] button to end the procedure.
77
Click the [LOG OFF] button in the “MS01” dialog box.
Click
Click
18
88
In the “FUJIFILM Log-Off” dialog box, enter “operator” for “Password” and then click the [OK] button. 1. Enter “operator”
33
Click the [Regist] button to register the settings.
2. Click
••The system logs off the current mode and then logs in to the selected mode automatically. Wait for a while since this operation requires several minutes. ••The MS01 software restarts automatically.
44444444 Modifying Existing Folders
Click
44
Click the [Cancel] button to end the procedure.
Use the following procedure to modify setting data within a shared folder that has been created.
11
Select the shared folder to be modified from the “Spool Path” pull-down menu.
Click
55
Click the [Tools] button in the “View Orders” screen. Click
22
Change the settings in the “Spool Path Setting” section.
••W he n c re ating a new folde r, refe r to the specifications for the “Spool Path Setting” section and manually change the settings for print quantity, back printing, etc.
19
66
Click the [LOG OFF] button in the “MS01” dialog box.
Click
77
In the “FUJIFILM Log-Off” dialog box, enter “operator” for “Password” and then click the [OK] button. 1. Enter “operator”
2. Click
••The system logs off the current mode and then logs in to the selected mode automatically. Wait for a while since this operation requires several minutes. ••The MS01 software restarts automatically.
20
5 Using the LAN Spool Software (MS13) 5555
Hot Folder Print Function
Use the sample environment to make a sample Hot Folder Print. With the MS13 software active, the MS13 software registers a print order for each image file that it finds during the periodic scanning of the image files according to the specified interval.
33
The order is automatically processed.
555555 Print Orders
11
Copy a JPG image to the “D:\C8Hot\4R” folder.
Note: A maximum of 36 alphanumeric characters can be used for a file name.
22
When the specified scanning inter val has elapsed, the MS13 software registers a print order for any image files that it finds in the shared folders. When the order for an image file has been registered, the image file in the “D:\ C8Hot\4R” folder is deleted.
4R, 10 × 12... Order registration is done at the end of the scanning interval (default interval is 300 seconds).
21
5555
JOB File Print Function
555555 Print Orders from the JOB File Print Service Software (Windows Version)
33
When the “Administrative Settings” screen appears, set a value for each item.
Using the JOB File Print Service Software, you can specify parameters such as print size and print quantity and initiate printing via network connection.
11
In the Windows desktop screen, click the [Start] button and then select “JOB File Print Service Software”.
The first items that must be set are “Output Device” and “Print Size.” For the other settings, refer to Section 4.1”Setting for DI Simple Print Software”.
After making the settings, click the [OK] button to end the application. In the Windows desktop screen, click the [Start] button and then select “JOB File Print Service Software” again. The administrative settings are read when the software is started up, and the “JOB File Print Service Software” default settings are applied.
22
Set the environment. It is necessary to do this immediately after installing the software. Click the [Admin.] button to proceed.
This is necessary when the software is started up for the first time after it is installed.
44
Print orders. The JOB File Print function provides two types of print orders: a folder order that includes all image files within a folder and a file order for a single image file.
In the case of a folder order, the folder is specified by the folder path in “Directory Path.”
In the case of a file order, the file name is indicated in “File Name”.
Note: A maximum of 36 alphanumeric characters can be used for a file name.
22
55
Select the other items and then click the [Order Regist.] button to complete the order. A folder is created in the “C8Spool” folder with a name that consists of the date and time of the order, and inside the folder the image data is created for the respective order and JOB files (Condition.txt and End.txt). ** DSC (Automatic Correction for Digital Camera Image ) cannot be specified when “PD” is selected as the output device. Furthermore, this function is effective only for Exif-JPEG and ExifTIFF files, even when sRGB is selected.
66
The order is automatically processed.
555555 P rint Orders from the JOB File Print Ser vice Sof t ware (Macintosh Version)
11
22
Double - click the [JOB File Print Ser vice Software] icon on the Macintosh desktop.
Since no folder for output exists immediately after the software is installed, the following message is displayed. Click the [OK] button.
Click
33
When the following screen appears, click the [Admin.] button to display the settings screen.
Click
23
44
Do the settings in the “Administrative Settings” screen in the following order.
Click
(4) In making the other settings, refer to Section 4.1 “Setting for DI Simple Print Software”. (1) Click the [Browse...] button for “Image Spool” and specify the “C8Spool” folder in the ICIII connected to the network.
(2) Click the [Browse...] button for “Setup file Dir” and specify the [C8Device] folder in the ICIII connected to the network.
(5) Click the [OK] button in the “Administrative Settings” screen (the screen disappears). After completing the settings, start up the JOB File Print Service Software again.
Click
Print orders. The JOB File Print function provides two types of print orders: a folder order that includes all image files within a folder and a file order for a single image file.
(3) Click the [OK] button in the “Administrative Settings” screen. The following message is displayed and selection of the output device becomes possible.
In the case of a folder order, the folder is specified by the folder path in “Directory Path.”
In the case of a file order, the file name is indicated in “File Name”.
Note: A maximum of 36 alphanumeric characters can be used for a file name.
24
55
Select the other items and then click the [Order Regist.] button to complete the order. A folder is created in the “C8Spool” folder with a name that consists of the date and time of the order, and inside the folder the image data is created for the respective order and JOB files (Condition.txt and End.txt). ** DSC (Automatic Correction for Digital Camera Image ) cannot be specified when “PD” is selected as the output device. Furthermore, this function is effective only for Exif-JPEG and ExifTIFF files, even when sRGB is selected.
66
The order is automatically processed.
25
6 File Specifications 6666
JOB File Print Function
The JOB File Print function creates image files and JOB files (Condition.txt and End.txt) and places them in a shared folder. The JOB files specify the print size, number of prints and other parameters for each image, as shown below.
666666 Condition.txt The specifications described in Condition.txt are as follows. For any item that is omitted, the setting in Default.ini is applied.
[OutDevice] DeviceName= PICsRGB [ImageList] ImageCnt=2 1=test1.bmp 2=test2.bmp
[test1.bmp] SizeName=102C PrintCnt=1 BackPrint=FILE BackPrintLine2= Back Resize=FITIN DSC_Chk=FALSE [test2.bmp] :
26
●●● ●●●
●●● ●●● ●●● ●●●
●●● ●●● ●●● ●●● ●●● ●●● ●●●
[Section name] Key name = setting [Section name] Key name = setting Key name = setting Key name = setting
[Section name] Key name = setting Key name = setting Key name = setting Key name = setting Key name = setting Key name = setting
•• List of Condition.txt settings Section Name
Key Name
Setting Value
Explanation
OutDevice
DeviceName
PICsRGB
Color space of Frontier (“PICsRGB” or “PICPD”)
ImageList
DeviceName
2
Number of image files
(numerical value)
Test1.bmp
Name of image file (A maximum of 36 alphanumeric characters)
SizeName
102C
Name of print size (Selected from FdiaDevice.ini)
PrintCnt
1
Number of prints (1-999)
BackPrint
FREE
The text strings of the 1st line and 2nd line entered in “Back Print” in the “Administrative Settings” screen are printed.
FILE
The order number (date), the file name and the text strings of the 1st line and 2nd line entered in “Back Print” in the “Administrative Settings” screen are printed.
NONE
No back printing is done.
BackPrintLine1
Text string
A text string to be printed on the back of prints (A maximum of 40 alphanumeric characters)
BackPrintLine2
Text string
A text string to be printed on the back of prints (A maximum of 40 alphanumeric characters)
Resize
FILLIN
Fill-in
FITIN
Fit-in
NONE
No Resize
TRUE
DSC automatic correction is performed.
FALSE
DSC automatic correction is not performed.
Test1.bmp (file name)
DSC_Chk
* (FREE/FILE/NONE/FILLIN/FITIN/TRUE/FALSE: Capital letters)
666666 End.txt In addition to the “Condition.txt” JOB file and the image data, the “End.txt” JOB file is also created by the JOB File Print function and placed in the shared folder. End.txt is a 0-byte file required for the MS13 software to create an order.
27
666666 FdiaDevice.ini The MS13 software obtains output device and print size information from the ICIII and outputs this data as “FdiaDevice.ini” to the folder containing the output device list (default=“D:\C8Device”). The contents of FdiaDevice.ini are as follows:
[DeviceList] DeviceCnt=2
●●● ●●●
[1] OutDeviceName= PICPD ColorSpace=PD PSizeCnt=10 1=89C 2=89P 3=89H 4=102C 5=102P 6=102H 7=5R 8=4R 9=4RBD 10=8R [2] OutDeviceName= PICsRGB ColorSpace=SRGB
Section Name
Key Name
[Section name] Key name = value
●●●
[Section name] Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value Key name = value
●●●
[Section name]
●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●● ●●●
Setting Value
Explanation
DeviceList
DeviceCnt
2
Number of output devices
1, 2
OutDeviceName
PICPD, PICsRGB
Name of output device
ColorSpace
PD, sRGB
Output color space (sRGB or PD)
PSizeCnt
10
Number of print sizes
1, 2, 3...
89C, 89P...
Print size names
This data is updated each time the MS13 software is started up. •• Automatic Correction Applicability (DSC_CHK) Output Device
Image File
DSC Automatic Correction Applicability
PD
JPEG, BMP, Exif-JPEG, Exif-TIFF
Not applicable
sRGB
Exif-JPEG, Exif-TIFF
Applicable
JPEG, BMP
Not applicable
28
7 Error Messages If an error is found in the default setting file, the DI Simple Print Software displays the error message. If an error is found in the setting file for the JOB File Print Service Software or registration of the settings has failed, error information is written in the error log. Error Message List Error Code
Message
9003
Setting for interval is incorrect. Set between 1 and 1800 sec.
9004
Setting for print q'ty is incorrect. Set between 1 and 999.
9005
Specified directory is not exist.
9006
Setting of output device and print size are incorrect.
9007
Failed to register the administrative settings. Close DI Simple Print Software application.
9008
Update all settings. Re-start the DI Simple Print Software application.
9012
Setting for back print is incorrect.
9013
Setting for resize is incorrect.
9014
Setting for DSC correc. is incorrect.
9015
Setting for no save is incorrect.
Action Consult your technical representative.
29
8 Uninstalling the LAN Spool Software (MS13) 8888
11
Uninstalling the DI Simple Print Software
Click the [ ! ] button at the upper right-hand corner of the MS01 “View Orders” screen.
44
In the Windows desktop screen, click the [Start] button and then select “Control Panel”.
Click
22
In the “Shutdown” dialog box, click the [OK] button.
1. Click Click
55
2. Click
In the “Control Panel” screen, double-click the [Add or Remove Programs] icon.
••The ICIII is turned OFF.
33
Start up the ICIII while pressing the [Shift] key. Note: On the Windows start-up screen, enter “FRONTIER” as the user name and password.
Double-click
30
66
In the “Add or Remove Programs” screen, select “DI Simple Print Software” and then click the [Change/Remove] button.
88
When uninstallation is completed, the “Maintenance Complete” dialog box appears. Click the [Finish] button.
1. Select “DI Simple Print Software”
2. Click
77
Click
In the file deletion confirmation dialog, click the [OK] button. Uninstallation is performed.
Click
31
8888
Uninstalling the JOB File Print Service Software
888888 U ninstalling the Windows Version
11
33
In the Windows desktop screen, click the [Start] button and then select “Control Panel”.
In the “Add or Remove Programs” screen, select “JOB File Print Service Software” and then click the [Change/Remove] button. 1. Select “JOB File Print Service Software”
2. Click
44
1. Click
22
2. Click
In the “Control Panel” screen, double-click the [Add or Remove Programs] icon.
In the file deletion confirmation dialog, click the [OK] button. Uninstallation is performed.
Click
888888 U ninstalling the Macintosh Version Drag and drop the [JOB FILE Print] icon onto the Trash icon. Uninstallation is now completed.
Double-click
32
9 Index C
P
Condition.txt......................................................... 26
Preparations for Installation............................. 6, 12
Creating and Modifying Hot Folders.................... 16
Print Orders.......................................................... 21
Creating a New Shared Folder............................. 17
Print Orders from the JOB File Print Service
E End.txt.................................................................. 27 Error Messages.................................................... 29
F
Software (Macintosh Version)............................... 23 Print Orders from the JOB File Print Service Software (Windows Version)................................. 22
S Setting for DI Simple Print Software.................... 13
FdiaDevice.ini....................................................... 28
Setting for the Hot Folder Print Function............. 16
File Specifications................................................ 26
Setting the LAN Spool Software (MS13).............. 13
H Hot Folder Print Function................................. 4, 21
I
Specification of the MS13 Software....................... 5
U Uninstalling the DI Simple Print Software............ 30 Uninstalling the JOB File Print Service Software. 32
Installing the DI Simple Print Software................... 6
Uninstalling the LAN Spool Software (MS13)....... 30
Installing the JOB File Print Service Software........ 9
Uninstalling the Macintosh Version...................... 32
Installing the Macintosh Version........................... 12
Uninstalling the Windows Version........................ 32
Installing the Software...................................... 7, 12
Using the LAN Spool Software (MS13)................ 21
Installing the Windows Version............................. 10
J JOB File Print Function.............................. 5, 22, 26
M Modifying Existing Folders................................... 19
O Overview of the LAN Spool Software (MS13)........ 4
33
FUJIFILM Corporation 7-3, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan
Ref.No.PP3-B1277E4 09.10-FP