TECHNICAL CORRECTION June 2001
Process Industry Practices Civil
PIP CVC01016 Plant Site and Project Data Sheets– Introduction and References
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.
This Practice is subject to revision at any time by the responsible Function Team and will be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn. Information on whether this Practice has been revised may be found at http://www.pip.org.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3208 Red River Street, Suite 300, Austin, Texas 78705. PIP member companies and subscribers may copy this Practice for their internal use. Changes, overlays, addenda, or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP.
PRINTING HISTORY December 1998 Issued March 2000 Issued June 2001 Technical Correction Not printed with State funds
TECHNICAL CORRECTION June 2001
Process Industry Practices Civil
PIP CVC01016 Plant Site and Project Data Sheets– Introduction and References Table of Contents 1. Introduction .................................. 2 1.1 Purpose ............................................. 2 1.2 Scope................................................. 2
2. References ................................... 2 2.1 Process Industry Practices ................ 2 2.2 Industry Codes and Standards .......... 2 2.3 Government Regulations ................... 3
Process Industry Practices
Page 1 of 3
PIP CVC01016 Plant Site and Project Data Sheets–Introduction and References
1.
TECHNICAL CORRECTION June 2001
Introduction 1.1
Purpose This Practice provides the introduction and references for PIP CVC01017, Plant Site Data Sheet, and PIP CVC01018, Project Data Sheet. The Plant Site Data Sheet and the Project Data Sheet are used for compiling and conveying facilities design data in a consistent format.
1.2
Scope The Data Sheets provide plant site and project-specific design data for use in conjunction with the PIP civil, structural, and architectural and building utilities design criteria. The plant site data should be provided by the Owner and conveyed to the project team. The project data may be provided by the Owner or developed by the project design team and approved by the Owner. Not all information provided in these documents may be applicable to a specific site or project. Some information may be applicable to work performed by other disciplines and should, therefore, be issued to all disciplines for their use.
2.
References The latest edition of the following codes, standards, specifications, and references in effect on the date of contract award shall be used, except as otherwise specified. Short titles will be used herein when appropriate. 2.1
Process Industry Practices (PIP) – PIP ARC01015 - Architectural and Building Utilities Design Criteria (In Process) – PIP ARC01016 - Building Data Sheets (In Process) – PIP CVC01015 - Civil Design Criteria – PIP CVC01017 - Plant Site Data Sheet – PIP CVC01018 - Project Data Sheet – PIP STC01015 - Structural Design Criteria
2.2
Industry Codes and Standards • American Association of State Highway and Transportation Officials (AASHTO) – AASHTO Standard Specifications for Highway Bridges • American Institute of Steel Construction (AISC) – AISC Manual of Steel Construction - Allowable Stress Design (ASD) – AISC Manual of Steel Construction - Load and Resistance Factor Design (LRFD)
Page 2 of 3
Process Industry Practices
TECHNICAL CORRECTION June 2001
PIP CVC01016 Plant Site and Project Data Sheets–Introduction and References
• American Railway Engineering Association (AREA) – AREA Manual for Railway Engineering • American Society of Civil Engineers (ASCE) – ASCE 7 - Minimum Design Loads for Buildings and Other Structures • American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) – ASHRAE Handbook - Fundamentals • American Society for Testing and Materials (ASTM) –
ASTM A36/A36M - Standard Specification for Carbon Structural Steel
–
ASTM A572/A572M - Standard Specification for High-Strength, Low-Alloy, Columbian-Vanadium Structural Steels
– ASTM A992/A992M - Standard Specification for Steel for Structural Shapes for Use in Building Framing • Building Officials and Code Administrators International, Inc. (BOCA) – BOCA National Building Code • Building Seismic Safety Council (BSCC) – BSCC Recommended Provisions for Seismic Regulations for New Buildings (NEHRP) • International Building Code (IBC) • International Conference of Building Officials (ICBO) – Uniform Building Code (UBC) • National Fire Protection Association (NFPA) – NFPA 101 - Life Safety Code (LSC) • Southern Building Code Congress International, Inc. (SBCCI) – Standard Building Code (SBC) 2.3
Government Regulations Federal Standards and Instructions of the Occupational Safety and Health Administration (OSHA), Environmental Protection Agency (EPA), and any additional requirements by state or local agencies that have jurisdiction in the state where the project is to be constructed shall apply.
Process Industry Practices
Page 3 of 3
