Aim-to compare the emf of different cells using potentiometerFull description
Physics Investigatory Project
to study the variation in electrical resistance
investigatory class 12 project on thermistor
It's cool
f43t4tgFull description
Investigatory Project of physics class 12thFull description
PHYSICS PROJECT ON COULOMB'S LAWFull description
it has a great explanation of physics investigatory project
trhdfhg
Class 12 CBSE Physics Investigatory ProjectFull description
afsfFull description
PROJECT ON REFRACTIVE INDEX . It is the right project make sure no one has done it in your school its your last moment resort. Easy viva questions may be predicted what is the cause of refraction a...
Ldr project in pHysics for class 12 students
TO CONSTRUCT A PORTABLE MOBILE CHARGER WHICH SUPPLIES 7.5V TO CHARGE SAMSUNG GALAXY NOTE I. REMEMBER TO CHANGE THE NAME AND Pics FOR AUTHENTICATION. I ALSO SUBMITTED THIS PROJECT....
PHYSICS INVESTIGATORY PROJECT AIM:- CHARGING AND DISCHARGING OF CAPACITORS IN R-C CIRCUIT PURPOSE THE GOAL OF THIS PROJECT IS TO verify that 63% charge is stored in a capacitor in an R-C…Full description
Physics Investigatory project on Semiconductors for class 12 CBSE
1212
ydse
Content Analysis of HoneyFull description
Physics Investigatory Project “Voltage Regulator Using Zener Diode” Diode” Name:G. Ananthakrishna Ananthakrishna Class: XII-A Roll No.: School:Kendriya School:Kendriya Vidyalaya AFS Begumpet Guide Teacher:Mr. Teacher:Mr. T. Srinivasa Rao
1
Certificate This is to certify that G.Ananthakrishna, student of Class XII,Kendriya Vidyalaya AFS Begumpet has completed the project titled “Voltage Regulator Using Zener Diode” during the academic year 2016-2017 towards partial fulfillment of credit for the Computer Science practical evaluation of AISSCE 2017, and submitted satisfactory report, as compiled in the following pages, under my supervision.
Mr. T. Srinivasa Rao
(PGT Physics)
External Examiner
2
Acknowledgement I thank Mr. T. Srinivasa Rao for his constant support and encouragement towards the completion of this project.I also thank my principal Mr. A.A. Israel and my parents for their support.
3
INDEX
Certificate
2
Acknowledgement
3
AIM
5
Apparatus/Components
6
Theory
7
Procedure
9
Observations
10
Result
11
References
12
4
AIM
“To Construct a Voltage Regulator Using a Zener Diode”
Theory Zener Diode: A zener diode is a diode that breaks down at a specific voltage when it is reverse biased. A zener diode can maintain the voltage at its breakdown voltage as long as the supply voltage is above this value.
In Forward Bias: When a zener diode is forward biased it behaves like an ordinary silicon diode. In Reverse Bias: When the zener diode is reverse biased with a voltage less than Vz it blocks the current, like an ordinary silicon diode. When the reverse bias voltage reaches Vz the voltage is limited to around this value, but it can conduct very large currents
7
Circuit Diagram:
Here, Input=9V RA=2.7K ohm Zener Diode=5.1V
8
Procedure 1. Assemble the above circuit on the bread board. 2. Use a multimeter to verify that the output voltage is equal to the zener voltage. 3. If not check all connections again and make sure the zener diode is in reverse bias. 4. If still the voltage is not correct change the diode. 5. Your Voltage Regulator is ready.
9
Observations The Output Voltage is Equal to the Zener Voltage(5.1V) and Hence Voltage has been Regulated.
10
Result The Voltage Regulator Has Been Constructed Successfully with output voltage of 5.1V
