Petroleum Engineering Assignment 2012 13 for salfordFull description
Good readc
Essay
assignment 3 for networksFull description
Descrição completa
About Marine Engineering
Full description
thinkiit pre foundation class viii chemistry
petroleum geologyFull description
foundation educationFull description
GeophysicsFull description
assignment of oil and gasFull description
SCM assignment 3 problemsFull description
ethicsFull description
This is a completed skills related assignment as part of the CELTA course, completed in April 2015.Full description
Data base Week 3
This is a completed skills related assignment as part of the CELTA course, completed in April 2015.Full description
Just the essayFull description
Descripción completa
memoFull description
Assignment 3: Oil Reserve R eserve Estimation Estimati on Figure 2 presents the structure map of X field f ield which integrated with Fault A. The contour interval is 200ft., 2 00ft., and the depth in ft. subsea. The bold contour outlines the oil/water contact. Small circles indicate wells. a) Prepare an isopach contour map represents of the vertical thickness saturated with oil. b) Construct a cross section profile prof ile through Well #3 along West to East of the map. c) Given the following data: Porosity (ϕ) = 20%, Water saturation (Sw)= 25%, initial oil formation f ormation volume factor (Boi) = 1.3 bbl/STB, and recovery factor is estimated to be 0.19. Estimate the bulk volume and volume and calculate the oil reserves for reserves for the reservoir in the t he west block of Fault A.
