PDMS Piping Tutorial

PDMS Piping Tutorial: 1. Setting up the training module 1. Enter PDMS: START → ALL PROGRAMS → AVEVA → VANTAGE PDMS 11.6 → RUN PDMS 2. Login to SAM project (PDMS Sample Project) using SYSTEM username and password XXXXXX (capital X six times). Choose SAMPLE for the MDB and ADMIN for the module and click OK. SYSTEM username is a free user that can access all database. As default, the password for SYSTEM user is XXXXX. 3.

ADMIN module opened.

4.

Show the command line. Select menu Display → Command Line

5.

In command line type: SHOW !!TRARESET (watch for spelling) to display the Training Course

Selection Form. There are 20 training options available. In this tutorial, you need to select training course number 1 and 2 only. 6.

Select no (1) Basic Piping DESIGN Course and press Apply. The form will show that the

training course is now set-up and ready. The training can be accessed in TRAINA MDB 7.

Select number (2) Exercise 2 Basic Piping DESIGN Course. And then Apply

8.

Exit form ADMIN module to MONITOE by selecting menu Admin →  Modules → Monitor...

9.

You will be opted to Leave Admin and enter Monitor? Press Yes

10.

The training can be accessed in TRAINA MDB. Change the MDB from SAMPLE to TRAINA.

11.

Enter DESIGN module by choosing menu Monitor → Design → Macro Files…

12.

Option: Leave Monitor and enter Design? Press Yes.