PCNSE6

Palo Alto Networks PCNSE6

Palo Alto Networks Certified Network Security Engineer 6.0 Version: 4.1

Palo Alto Networks PCNSE6 Exam QUESTION NO: 1 Which authentication method can provide role-based administrative access to firewalls fir ewalls running PAN-OS? A. LDAP B. Certificate-based authentication C. Kerberos D. RADIUS with Vendor Specific Attributes Answer: D Explanation:

QUESTION NO: 2 HOTSPOT Assuming that the default antivirus profile is installed, match each decoder with its default action. Answer options may be used more than once or not at all.

www.braindumps.com

2

Palo Alto Networks PCNSE6 Exam QUESTION NO: 1 Which authentication method can provide role-based administrative access to firewalls fir ewalls running PAN-OS? A. LDAP B. Certificate-based authentication C. Kerberos D. RADIUS with Vendor Specific Attributes Answer: D Explanation:

QUESTION NO: 2 HOTSPOT Assuming that the default antivirus profile is installed, match each decoder with its default action. Answer options may be used more than once or not at all.

www.braindumps.com

2

Palo Alto Networks PCNSE6 Exam

Answer:

www.braindumps.com

3


Explanation: FTP, SMB – Block HTTP – Block POP3, SMTP – Alert IMAP – Alert

QUESTION NO: 3 Which three engines are built into the Single-Pass Parallel Processing Architecture? Choose 3 answers

www.braindumps.com

4

Palo Alto Networks PCNSE6 Exam A. Application Identification (App-ID) B. Group Identification (Group-ID) C. User Identification (User-ID) D. Threat Identification (Threat-ID) E. Content Identification (Content-ID) Answer: A,C,E Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/white-papers/single-pass-parallel-processing-architecture.pdf page 5

QUESTION NO: 4 HOTSPOT Within a Zone Protection Profile, under the Reconnaissance Protection tab, there are several possible values for Action:

Match each Reconnaissance Protection Action to its description. Answer options may be used more than once or not at all.

www.braindumps.com

5


Answer:

www.braindumps.com

6

Palo Alto Networks PCNSE6 Exam Explanation: Allow: Permits the port scan attempts. Alert: Generates an alert for each scan that matches the threshold within the specified time interval. Block: Drops all traffic from the source to the destination. Block IP: Drops all traffic for a specific period of time (in seconds). There are two options: • Source: Blocks traffic from the source • Source-and-Destination: Blocks traffic for the source-destination pair https://live.paloaltonetworks.com/servlet/JiveServlet/previewBody/5078-102-514892/Understanding_DoS_Protection.pdf

QUESTION NO: 5 What is a prerequisite for configuring a pair of Palo Alto Networks firewalls in an Active/Passive High Availability (HA) pair? A. The peer HA1 IP address must be the same on both firewalls. B. The management interfaces must be on the same network. C. The firewalls must have the same set of licenses. D. The HA interfaces must be directly connected to each other. Answer: C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/60/pan-os/pan-os/section_4.pdf page 134

QUESTION NO: 6 Which source address translation type will allow multiple devices to share a single translated source address while using a single NAT Policy rule? A. Dynamic IP and Port B. Dynamic IP C. Bi-directional D. Static IP Answer: A Reference: https://www.paloaltonetworks.com/documentation/61/pan-os/panwww.braindumps.com

7

Palo Alto Networks PCNSE6 Exam os/networking/nat.html

QUESTION NO: 7 HOTSPOT Match each type of report provided by the firewall with its description. Answer options may be used more than once or not at all.

Answer:

www.braindumps.com

8


Explanation: PDF Summary Reports – Reports that combine up to 18 custom or predefined reports from the Threat, Application, Traffic, URL Filtering Categories into one document. Report Groups – Reports the combine other custom and predefined reports into a single file to be emailed to one or more recipients. Custom Reports – Reports created by an administrator that filter on conditions and columns User or Groups Activity Reports – Reports on the application use and URL activity for a specific user or a group Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/61/panorama/Panorama_AdminGuide/section_6.pdf page 151

QUESTION NO: 8

www.braindumps.com

9

Palo Alto Networks PCNSE6 Exam How can a Palo Alto Networks firewall be configured to send syslog messages in a format compatible with nonstandard syslog servers? A. Enable support for non-standard syslog messages under device management. B. Select a non-standard syslog server profile. C. Create a custom log format under the syslog server profile. D. Check the custom-format checkbox in the syslog server profile. Answer: C Reference: https://live.paloaltonetworks.com/docs/DOC-2021 Page 16 of PDF available there.

QUESTION NO: 9 Which Public Key Infrastructure component is used to authenticate users for GlobalProtect when the Connect Method is set to "pre-logon"? A. Certificate Revocation List B. Trusted root certificate C. Machine certificate D. Online Certificate Status Protocol Answer: C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/60/globalprotect/Global_Protect_6.0.pdf page 12.

QUESTION NO: 10 A company is in the process of upgrading their existing Palo Alto Networks firewalls from version 6.1.0 to 6.1.1. Which three methods can the firewall administrator use to install PAN-OS 6.1.1 across the enterprise? Choose 3 answers A. Push the PAN-OS 6.1.1 updates from the support site to install on each firewall. B. Download PAN-OS 6.1.1 files from the support site and install them on each firewall after manually uploading. C. Download PAN-OS 6.1.1 to a USB drive and the firewall will automatically update after the USB drive is inserted in the firewall. www.braindumps.com

10

Palo Alto Networks PCNSE6 Exam D. Push the PAN-OS 6.1.1 update from one firewall to all of the other remaining after updating one firewall. E. Download and push PAN-OS 6.1.1 from Panorama to each firewall. F. Download and install PAN-OS 6.1.1 directly on each firewall. Answer: B,E,F Reference: https://live.paloaltonetworks.com/docs/DOC-1062

QUESTION NO: 11 Given the following routing table:

Which configuration change on the firewall would cause it to use 10.66.24.88 as the nexthop for the 192.168.93.0/30 network? A. Configuring the Administrative Distance for RIP to be higher than that of OSPF Ext B. Configuring the metric for RIP to be higher than that of OSPF Int C. Configuring the metric for RIP to be lower than that of OSPF Ext D. Configuring the Administrative Distance for RIP to be lower than that of OSPF Int Answer: D Reference: https://live.paloaltonetworks.com/servlet/JiveServlet/previewBody/5284-102-317278/Route%20Redistribution%20and%20Filtering%20TechNote%20-%20Rev%20B.pdf

QUESTION NO: 12

www.braindumps.com

11

Palo Alto Networks PCNSE6 Exam A company hosts a publicly-accessible web server behind their Palo Alto Networks firewall, with this configuration information: -

Users outside the company are in the "Untrust-L3" zone. The web server physically resides in the "Trust-L3" zone. Web server public IP address: 1.1.1.1 Web server private IP address: 192.168.1.10

Which NAT Policy rule will allow users outside the company to access the web server?

A. Option A B. Option B C. Option C D. Option D Answer: B Explanation:

QUESTION NO: 13 A company has purchased a WildFire subscription and would like to implement dynamic updates to download the most recent content as often as possible. What is the shortest time interval the company can configure their firewall to check for WildFire updates? A. Every 24 hours B. Every 30 minutes C. Every 15 minutes D. Every 1 hour www.braindumps.com

12

Palo Alto Networks PCNSE6 Exam E. Every 5 minutes Answer: C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/60/wildfire/WF_Admin/section_1.pdf page 11

QUESTION NO: 14 Which method is the most efficient for determining which administrator made a specific change to the running config? A. In the Configuration log, set a filter for the edit command and look for the object that was changed. B. In the System log, set a filter for the name of the object that was changed. C. In Config Audit, compare the current running config to all of the saved configurations until the change is found. D. In Config Audit, compare the current running config to previous committed versions until the change is found. Answer: B Explanation:

QUESTION NO: 15 You are configuring a File Blocking Profile to be applied to all outbound traffic uploading a specific file type, and there is a specific application that you want to match in the policy. What are three valid actions that can be set when the specified file is detected? Choose 3 answers A. Reset-both B. Block C. Continue D. Continue-and-forward E. Upload Answer: B,C,D Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/60/pan-os/pan-os/section_8.pdf page 287

www.braindumps.com

13


QUESTION NO: 16 Two firewalls are configured in an Active/Passive High Availability (HA) pair with the following election settings:

Firewall 5050-B is presently in the "Active" state and 5050-A is presently in the "Passive" state. Firewall 5050-B reboots causing 5050-A to become Active. Which firewall will be in the "Active" state after firewall 5050-B has completed its reboot and is back online? A. Both firewalls are active (split brain) B. Firewall 5050-B C. Firewall 5050-A D. It could be either firewall Answer: B Reference: https://live.paloaltonetworks.com/docs/DOC-2926

QUESTION NO: 17 Which two statements are true about DoS Protection Profiles and Policies? Choose 2 answers A. They mitigate against SYN, UDP, ICMP, ICMPv6, and other IP Flood attacks on a zone basis, regardless of interface(s). They provide reconnaissance protection against TCP/UDP port scans and host sweeps. B. They mitigate against SYN, UDP, ICMP, ICMPv6, and other IP Flood attacks. They provide resource protection by limiting the number of sessions that can be used. C. They mitigate against volumetric attacks that leverage known vulnerabilities, brute force methods, amplification, spoofing, and other vulnerabilities. D. They mitigate against SYN, UDP, ICMP, ICMPv6, and other IP Flood attacks by utilizing "random early drop".

www.braindumps.com

14

Palo Alto Networks PCNSE6 Exam Answer: B,D Reference: https://live.paloaltonetworks.com/servlet/JiveServlet/previewBody/7158-102-325328/Application%20DDoS%20Mitigation.pdf page 4

QUESTION NO: 18 Where can the maximum concurrent SSL VPN Tunnels be set for Vsys2 when provisioning a Palo Alto Networks firewall for multiple virtual systems? A. In the GUI under B. In the GUI under C. In the GUI under D. In the GUI under

Network->Global Protect->Gateway->Vsys2 Device->Setup->Session->Session Settings Device->Virtual Systems->Vsys2->Resource Network->Global Protect->Portal->Vsys2

Answer: C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/tech-briefs/virtual-systems.pdf page 6

QUESTION NO: 19 A security engineer has been asked by management to optimize how Palo Alto Networks firewall syslog messages are forwarded to a syslog receiver. There are currently 20 PA-5060 s, each of which is configured to forward syslogs individually. The security engineer would like to leverage their two M-100 appliances to send syslog messages from a single source and has already deployed one in Panorama mode and the other as a Log Collector. What is the remaining step in implementing this solution? A. Configure Collector Log Forwarding B. Configure a Syslog Proxy Profile C. Configure a Panorama Log Forwarding Profile D. Enable Syslog Aggregation Answer: A Reference: https://live.paloaltonetworks.com/docs/DOC-7987

www.braindumps.com

15


QUESTION NO: 20 What can cause missing SSL packets when performing a packet capture on data plane interfaces? A. There is a hardware problem with the offloading FPGA on the management plane. B. The missing packets are offloaded to the management plane CPU. C. The packets are hardware offloaded to the offload processor on the data plane. D. The packets are not captured because they are encrypted. Answer: C Reference: https://live.paloaltonetworks.com/docs/DOC-8621

QUESTION NO: 21 A company has a policy that denies all applications they classify as bad and permits only applications they classify as good. The firewall administrator created the following security policy on the company s firewall:

Which two benefits are gained from having both rule 2 and rule 3 present? Choose 2 answers A. Different security profiles can be applied to traffic matching rules 2 and 3. B. Separate Log Forwarding profiles can be applied to rules 2 and 3. C. Rule 2 denies traffic flowing across different TCP and UDP ports than rule 3. D. A report can be created that identifies unclassified traffic on the network. Answer: A,D Explanation:

QUESTION NO: 22

www.braindumps.com

16

Palo Alto Networks PCNSE6 Exam Company employees have been given access to the GlobalProtect Portal at https://portal.company.com:

Assume the following: 1. The firewall is configured to resolve DNS names using the internal DNS server. 2. The URL portal.company.com resolves to the external interface of the firewall on the company’s external DNS server and to the internal interface of the firewall on the company s internal DNS server. 3. The URL gatewayl.company.com resolves to the external interface of the firewall on the company’s external DNS server and to the internal interface of the firewall on the company s internal DNS server. This Gateway configuration will have which two outcomes? Choose 2 answers A. Clients outside the network will be able to connect to the external gateway Gateway1. B. Clients inside the network will be able to connect to the internal gateway Gateway1. C. Clients outside the network will NOT be able to connect to the external gateway Gateway1. D. Clients inside the network will NOT be able to connect to the internal gateway Gateway1. Answer: A,B Explanation:

QUESTION NO: 23 www.braindumps.com

17

Palo Alto Networks PCNSE6 Exam What is the maximum usable storage capacity of an M-100 appliance? A. 2TB B. 4TB C. 6TB D. STB Answer: B Reference: https://www.paloaltonetworks.com/documentation/61/panorama/panorama_adminguide/set-uppanorama/set-up-the-m-100-appliance.html

QUESTION NO: 24 A user is reporting that they cannot download a PDF file from the internet. Which action will show whether the downloaded file has been blocked by a Security Profile? A. Filter the Session Browser for all sessions from the user with the application "adobe". B. Filter the System log for "Download Failed" messages. C. Filter the Traffic logs for all traffic from the user that resulted in a Deny action. D. Filter the Data Filtering logs for the user’s traffic and the name of the PDF file. Answer: D Explanation:

QUESTION NO: 25 What has happened when the traffic log shows an internal host attempting to open a session to a properly configured sinkhole address? A. The internal host is trying to resolve a DNS query by connecting to a rogue DNS server. B. The internal host attempted to use DNS to resolve a known malicious domain into an IP address. C. A rogue DNS server is now using the sinkhole address to direct traffic to a known malicious domain. D. A malicious domain is trying to contact an internal DNS server. Answer: B www.braindumps.com

18

Palo Alto Networks PCNSE6 Exam Reference: https://www.paloaltonetworks.jp/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/pan-os/NewFeaturesGuide.pdf page 14

QUESTION NO: 26 Which Security Policy rule configuration option disables antivirus and anti-spyware scanning of server-to-client flows only? A. Apply an Application Override Policy B. Disable Server Response Inspection C. Add server IP to Security Policy exception D. Disable HIP Profile Answer: B Reference: https://www.paloaltonetworks.com/documentation/61/pan-os/pan-os/gettingstarted/set-up-basic-security-policies.html

QUESTION NO: 27 Which two interface types provide support for network address translation (NAT)? Choose 2 answers A. HA B. Tap C. Layer3 D. Virtual Wire E. Layer2 Answer: C,D Reference: https://live.paloaltonetworks.com/servlet/JiveServlet/previewBody/1517-102-711647/Understanding_NAT-4.1-RevC.pdf

QUESTION NO: 28 A firewall is being attacked with a port scan. Which component can prevent this attack?

www.braindumps.com

19

Palo Alto Networks PCNSE6 Exam A. DoS Protection B. Anti-Spyware C. Vulnerability Protection D. Zone Protection Answer: D Reference: https://live.paloaltonetworks.com/docs/DOC-4501

QUESTION NO: 29 A Palo Alto Networks firewall has the following interface configuration;

Hosts are directly connected on the following interfaces: Ethernet 1/6 - Host IP 192.168.62.2 Ethernet 1/3 - Host IP 10.46.40.63 The security administrator is investigating why ICMP traffic between the hosts is not working. She first ensures that ail traffic is allowed between zones based on the following security policy rule:

The routing table of the firewall shows the following output:

www.braindumps.com

20


Which interface configuration change should be applied to ethernet1/6 to allow the two hosts to communicate based on this information? A. Change the Management Profile. B. Change the security policy to explicitly allow ICMP on this interface. C. Change the configured zone to DMZ. D. Change the Virtual Router setting to VR1. Answer: D Explanation:

QUESTION NO: 30 HOTSPOT Match the components with their role in preventing threats. Answer options may be used more than once or not at all.

www.braindumps.com

21


Answer:

Explanation: Panorama – Dynamically updates firewall policy with VM context for NSX Physical Firewall – Inspects North-South traffic for threats Wildfire –Generates zero-day threat signatures VM series firewall- Inspects east-west traffic for threats

www.braindumps.com

22


QUESTION NO: 31 After migrating from an ASA firewall, the VPN connection between a remote network and the Palo Alto Networks firewall is not establishing correctly. The following entry is appearing in the logs: pfs group mismatched: my:0 peer:2 Which setting should be changed on the Palo Alto Firewall to resolve this error message? A. Update the IPSEC Crypto profile for the Vendor IPSec Tunnel from group2 to no-pfs. B. Update the IKE Crypto profile for the Vendor IKE gateway from no-pfs to group2. C. Update the IPSEC Crypto profile for the Vendor IPSec Tunnel from no-pfs to group2. D. Update the IKE Crypto profile for the Vendor IKE gateway from group2 to no-pfs. Answer: C Reference: https://www.paloaltonetworks.com/documentation/61/pan-os/pan-os/vpns/interpretvpn-error-messages.html

QUESTION NO: 32 Which two interface types can be used when configuring GlobalProtect Portal? Choose 2 answers A. Virtual Wire B. Loopback C. Tunnel D. Layer3 Answer: B,D Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/61/globalprotect/globalprotect-admin-guide.pdf page 10

QUESTION NO: 33

www.braindumps.com

23

Palo Alto Networks PCNSE6 Exam After pushing a security policy from Panorama to a PA-3020 firewall, the firewall administrator notices that traffic logs from the PA-3020 are not appearing in Panorama's traffic logs. What could be the problem? A. The firewall is not licensed for logging to this Panorama device. B. Panorama is not licensed to receive logs from this particular firewall. C. None of the firewall’s policies have been assigned a Log Forwarding profile. D. A Server Profile has not been configured for logging to this Panorama device. Answer: C Explanation:

QUESTION NO: 34 Palo Alto Networks maintains a dynamic database of malicious domains. Which two Security Platform components use this database to prevent threats? Choose 2 answers A. Brute-force signatures B. DNS-based command-and-control signatures C. PAN-DB URL Filtering D. BrightCloud URL Filtering Answer: B,C Reference: https://www.paloaltonetworks.com/products/features/apt-prevention.html

QUESTION NO: 35 Which three inspections can be performed with a next-generation firewall but NOT with a legacy firewall? Choose 3 answers A. Recognizing when SSH sessions are using SSH v1 instead of SSH v2 B. Validating that UDP port 53 packets are not being used to tunnel data for another protocol C. Identifying unauthorized applications that attempt to connect over non-standard ports D. Allowing a packet through from an external DNS server only if an internal host recently queried that DNS server E. Removing from the session table any TCP session without traffic for 3600 seconds Answer: B,C,D www.braindumps.com

24

Palo Alto Networks PCNSE6 Exam Explanation:

QUESTION NO: 36 Which mechanism is used to trigger a High Availability (HA) failover if a firewall interface goes down? A. Link Monitoring B. Heartbeat Polling C. Preemption D. SNMP Polling Answer: A Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/60/pan-os/pan-os/section_4.pdf page 130

QUESTION NO: 37 HOTSPOT Match the description of an application field with its name. Answer options may be used more than once or not at all.

www.braindumps.com

25

Palo Alto Networks PCNSE6 Exam Answer:

Explanation: A TCP three-way handshake completed successfully but the firewall does not have an appropriate App-ID signature – unknown-tcp A TCP handshake completed successfully, but only one more packet was sent – not enough to identify the application – insufficient-data Data received has been discarded because it matched an explicit “deny” rule for that traffic – notapplicable A TCP three-way handshake die NOT complete OR no additional data was sent after a successful TCP three-way handshake – incomplete UDP data has been received but the firewall does not have an appropriate App-ID signature – unknown-udp. Reference: https://live.paloaltonetworks.com/docs/DOC-1549

QUESTION NO: 38 How is the Forward Untrust Certificate used? A. It issues certificates encountered on the Untrust security zone. B. It is used for Captive Portal to identify unknown users. C. It is used when web servers request a client certificate. D. It is the issuer for an external certificate which is not trusted by the firewall. Answer: D Explanation: www.braindumps.com

26


QUESTION NO: 39 By default, all PA-5060 syslog data is forwarded out the Management interface. What needs to be configured in order to send syslog data out of a different interface? A. Configure Service Route Only for Threats and URL Filtering, and the traffic will use the same route. B. Configure an Interface Management Profile and apply it to the interface that the syslogs will be sent through. C. Configure a Service Route for the Syslog service to use a dataplane interface. D. Create a Log-Forwarding Profile that points to the device that will receive the syslogs. Answer: C Reference: https://www.paloaltonetworks.com/documentation/60/pan-os/pan-os/reports-andlogging/define-remote-logging-destinations.html

QUESTION NO: 40 A network administrator uses Panorama to push security policies to managed firewalls at branch offices. Which policy type should be configured on Panorama if the administrator wishes to allow local administrators at the branch office sites to override these policies? A. Implicit Rules B. Post Rules C. Default Rules D. Pre Rules Answer: D Explanation:

QUESTION NO: 41 A network engineer experienced network reachability problems through the firewall. The routing table on the device is complex. To troubleshoot the problem the engineer ran a Command Line www.braindumps.com

27

Palo Alto Networks PCNSE6 Exam Interface (CLI) command to determine the egress interface for traffic destined to 98.139.183.24. The command resulted in the following output:

How should this output be interpreted? A. There is no route for the IP address 98.139.183.24, and there is a default route for outbound traffic. B. There is no interface in the firewall with the IP address 98.139.183.24. C. In virtual-router vrl, there is a route in the routing table for the network 98.139.0.0/16. D. There is no route for the IP address 98.139.183.24, and there is no default route. Answer: D Explanation:

QUESTION NO: 42 A website is presenting an RSA 2048-bit key. By default, what will the size of the key in the certificate sent by the firewall to the client be when doing SSL Decryption? A. 512 bits B. 1024 bits C. 2048 bits D. 4096 bits Answer: C Reference: https://www.paloaltonetworks.com/documentation/61/panos/newfeaturesguide/management-features/configurable-key-size-for-ssl-forward-proxy-servercertificates.html

QUESTION NO: 43 A hotel chain is using a system to centrally control a variety of items in guest rooms. The client www.braindumps.com

28

Palo Alto Networks PCNSE6 Exam devices in each guest room communicate to the central controller using TCP and frequently disconnect due to a premature timeouts when going through a Palo Alto Networks firewall. Which action will address this issue without affecting all TCP traffic traversing the firewall? A. Create a security policy without security profiles, allowing the client-to-server traffic. B. Create an application override policy, assigning the client-to-server traffic to a custom application. C. Create an application with a specified TCP timeout and assign traffic to it with an application override policy. D. Create an application override policy, assigning the server-to-client traffic to a custom application. Answer: C Explanation:

QUESTION NO: 44 Ethernet 1/1 has been configured with the following subinterfaces:

The following security policy is applied:

The Interface Management Profile permits the following:

www.braindumps.com

29


Your customer is trying to ping 10.10.10.1 from VLAN 800 IP 10.10.10.2/24 What will be the result of this ping? A. The ping will be successful because the management profile applied to Ethernet1/1 allows ping. B. The ping will not be successful because the virtual router is different from the other subinterfaces. C. The ping will not be successful because there is no management profile attached to Ethernet1/1.799. D. The ping will not be successful because the security policy does not apply to VLAN 800. E. The ping will be successful because the security policy permits this traffic. Answer: D Explanation:

QUESTION NO: 45 What are the three Security Policy rule Type classifications supported in PAN-OS 6.1? A. Security, NAT, Policy-Based Forwarding

www.braindumps.com

30

Palo Alto Networks PCNSE6 Exam B. Intrazone, Interzone, Global C. Intrazone, Interzone, Universal D. Application, User, Content Answer: C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/framemaker/61/pan-os/NewFeaturesGuide.pdf page 18-19

QUESTION NO: 46 Which two steps are required to make Microsoft Active Directory users appear in the firewall’s traffic log? Choose 2 answers A. Enable User-ID on the zone object for the source zone. B. Enable User-ID on the zone object for the destination zone. C. Configure a RADIUS server profile to point to a domain controller. D. Run the User-ID Agent using an Active Directory account that has "domain administrator" permissions. E. Run the User-ID Agent using an Active Directory account that has "event log viewer" permissions. Answer: A,E Explanation:

QUESTION NO: 47 It is discovered that WebandNetTrends Unlimited’s new web server software produces traffic that the Palo Alto Networks firewall sees as "unknown-tcp" traffic. Which two configurations would identify the application while preserving the ability of the firewall to perform content and threat detection on the traffic? Choose 2 answers A. A custom application, with a name properly describing the new web server s purpose B. A custom application and an application override policy that assigns traffic going to and from the web server to the custom application C. An application override policy that assigns the new web server traffic to the built-in application "web-browsing" D. A custom application with content and threat detection enabled, which includes a signature, identifying the new web server s traffic

www.braindumps.com

31

Palo Alto Networks PCNSE6 Exam Answer: A,B Explanation:

QUESTION NO: 48 The IT department has received complaints about VoIP call jitter when the sales staff is making or receiving calls. QoS is enabled on all firewall interfaces, but there is no QoS policy written in the rulebase. The IT manager wants to find out what traffic is causing the jitter in real time when a user reports the jitter. Which feature can be used to identify, in real-time, the applications taking up the most bandwidth? A. Application Command Center (ACC) B. QoS Statistics C. QoS Log D. Applications Report Answer: A Reference: http://www.newnet66.org/Support/Resources/Using-The-ACC.pdf

QUESTION NO: 49 A company has a web server behind their Palo Alto Networks firewall that they would like to make accessible to the public. They have decided to configure a destination NAT Policy rule. Given the following zone information: -

DMZzone: DMZ-L3 Public zone: Untrust-L3 Web server zone: Trust-L3 Public IP address (Untrust-L3): 1.1.1.1 Private IP address (Trust-L3): 192.168.1.50

What should be configured as the destination zone on the Original Packet tab of the NAT Policy rule? A. DMZ-L3 B. Any C. Untrust-L3 D. Trust-L3 www.braindumps.com

32

Palo Alto Networks PCNSE6 Exam Answer: C Explanation:

QUESTION NO: 50 Which URL Filtering Security Profile action logs the URL Filtering category to the URL Filtering log? A. Allow B. Alert C. Log D. Default Answer: B Reference: https://www.paloaltonetworks.com/documentation/61/pan-os/pan-os/urlfiltering/configure-url-filtering.html

QUESTION NO: 51 Where in the firewall GUI can an administrator see how many sessions of web-browsing traffic have occurred in the last day? A. Monitor->Session Browser B. Monitor->App Scope->Summary C. Objects->Applications->web-browsing D. ACC->Application Answer: D Reference: http://www.newnet66.org/Support/Resources/Using-The-ACC.pdf

QUESTION NO: 52 The WildFire Cloud or WF-500 appliance provide information to which two Palo Alto Networks security services? Choose 2 answers A. Threat Prevention www.braindumps.com

33

Palo Alto Networks PCNSE6 Exam B. App-ID C. URL Filtering D. PAN-OS E. GlobalProtect Data File Answer: A,E Reference: https://www.paloaltonetworks.com/products/technologies/wildfire.html

QUESTION NO: 53 A Palo Alto Networks firewall is being targeted by an NTP Amplification attack and is being flooded with tens of thousands of bogus UDP connections per second to a single destination IP address and port. Which option, when enabled with the correct threshold, would mitigate this attack without dropping legitimate traffic to other hosts inside the network? A. Zone Protection Policy with UDP Flood Protection B. Classified DoS Protection Policy using destination IP only with a Protect action C. QoS Policy to throttle traffic below maximum limit D. Security Policy rule to deny traffic to the IP address and port that is under attack Answer: B Reference: https://live.paloaltonetworks.com/docs/DOC-1746

QUESTION NO: 54 Which three processor types are found on the data plane of a PA-5050? Choose 3 answers A. Multi-Core Security Processor B. Signature Match Processor C. Network Processor D. Protocol Decoder Processor E. Management Processor Answer: A,B,C Reference: https://www.paloaltonetworks.com/content/dam/paloaltonetworkscom/en_US/assets/pdf/white-papers/single-pass-parallel-processing-architecture.pdf page 8

www.braindumps.com

34


QUESTION NO: 55 A firewall administrator is troubleshooting problems with traffic passing through the Palo Alto Networks firewall. Which method will show the global counters associated with the traffic after configuring the appropriate packet filters? A. From the CLI, issue the show counter interface command for the egress interface. B. From the GUI, select "Show global counters" under the Monitor tab. C. From the CLI, issue the show counter global filter packet-filter yes command. D. From the CLI, issue the show counter interface command for the ingress interface. Answer: C Reference: https://live.paloaltonetworks.com/docs/DOC-7971

QUESTION NO: 56 In the following display, ethernetl/6 is configured with an interface management profile that allows ping with no restriction on the source address:

Given the following security policy rule base:

What is the result of a ping sent from an address on the Trust-L3 zone to the IP address of ethernet1/6? A. The firewall will send an ICMP redirect message to the client.

www.braindumps.com

35

Palo Alto Networks PCNSE6 Exam B. The client will receive an ICMP "destination unreachable" packet. C. The interface will respond. D. The traffic will be dropped by the firewall. Answer: D Explanation:

QUESTION NO: 57 A security architect has been asked to implement User-ID in a MacOS environment with no enterprise email, using a Sun LDAP server for user authentication. In this environment, which two User-ID methods are effective for mapping users to IP addresses? Choose 2 answers A. Terminal Server Agent B. Mac OS Agent C. Captive Portal D. GlobalProtect Answer: C,D Explanation:

QUESTION NO: 58 Which feature can be configured with an IPv6 address? A. Static Route B. RIPv2 C. DHCP Server D. BGP Answer: A Reference: https://live.paloaltonetworks.com/docs/DOC-5493

QUESTION NO: 59

www.braindumps.com

36

Palo Alto Networks PCNSE6 Exam A company wants to run their pair of PA-200 firewalls in a High Availability Active/Passive configuration and will be using HA-Lite. Which capability can be used in this situation? A. Configuration Sync B. Link Aggregation C. Session Sync D. Jumbo Frames Answer: A Reference: https://live.paloaltonetworks.com/docs/DOC-3091

QUESTION NO: 60 HOTSPOT A company has a Palo Alto Networks firewall with a single VSYS that has both locally defined rules as well as shared and device-group rules pushed from Panorama. In what order are the policies evaluated?

www.braindumps.com

37


Answer:

www.braindumps.com

38


Explanation: 1st: Shared Pre Rules 2nd: Device Group Pre Rules www.braindumps.com

39

PCNSE6

Recommend Documents