welding question and answer for inspection examFull description
Full description
piping questionFull description
IwcfFull description
Iwcf
1. Logic Math Question Set 1B - ANSWERFull description
Description : ASNT Study guide
ASNT Study guideDescripción completa
50utqDeskripsi lengkap
Model Question paper of CSWIP level 3.1 ,TWI UK courseFull description
Full description
Descrição completa
This is a question and the answer based on ER Diagram. This is a example of ISA hierarchy (Disjoint type). First read and try out the question. Then check the answer with your answer.
Full description
The purpose of this document is to assist you in your ATG interview preparation & to have quick check on your ATG skills. Updated this document with the 100+ more questions. This docum…Descripción completa
Pat Metheny's tune "Question and Answer" from the album "Like Minds" featuring Chick Corea and Gary Burton.
7/27/2016
NDT Question and Answer: UT Level 1 sample question set 1 1
More Next Blog»
Create Blog Sign In
NDT Question and Answer TUESDAY, 31 MAY 2011
UT Level 1 sample question set 1 Level 1 - 40 Questions (Set 1) Ultrasonic Testing Method (General)
1. A device that transforms electrical pulses into mechanical and vice versa utilizes: a. Snell's law b. piezoelectric principles c. mode conversion principles d. none of the above 2. Another name for Fresnel zone is: a. Fraunhoferzone b. near field c. far field d. Torrid zone 3. Attenuation is a: a. test display characteristic b. test material parameter c. transducer characteristic d. form of testing 4. “25 million cycles per second” can also be stated as: a. 25 kHz b. 2500 kHz c. 25 MHz d. 25 nHz 5. Moving a transducer over a test surface either manually or automatically is referred to as: a. scanning b. attenuating c. angulating d. resonating 6. A term used in ultrasonic to express the rate at which sound wave pass trough various substances is: a. frequency b. velocity c. wavelength d. pulse length 7. The indication on the instrument display that represents the far boundary of the material being tested is called: http://ndtsamplequestions.blogspot.in/2011/05/utlevel1samplequestionset1.html
FOLLOWERS Followers (31) Next
Follow
BLOG ARCHIVE
▼ 2011 (6) ► June (4) 1/7
7/27/2016
NDT Question and Answer: UT Level 1 sample question set 1
a. hash b. the initial pause c. the main bang d. the back surface reflection 8. Sweep range echo amplitude display on CRT is an illustration of a typical for: a. Ascan presentation b. Bscan presentation c. Cscan presentation d. Dscan presentation
▼ May (2) UT Level 1 sample question set 1 UT Level 1 Trial Questions
ABOUT ME
Wann View my complete profile
9. Plan View mapping showing variation of thickness is an illustration of a typical: a. Ascan presentation b. Bscan presentation c. Cscan presentation d. Dscan presentation 10.Crosssection of weld display on CRT is an illustration of a typical: a. Ascan presentation b. Bscan presentation c. Cscan presentation d. Dscan presentation 11. An ultrasonic testing technique in which the transducer element is not parallel to the test surface is called: a. angle beam testing b. immersion testing c. contact testing d. throughtransmission testing 12. Most commercial ultrasonic testing is accomplished using frequencies between: a. 1 and 25 kHz b. 1 and 1 000 kHz c. 0.2 and 25 MHz d. 15 and 100 MHz 13. In an Ascan presentation, the horizontal base line represents: a. the amount of reflected ultrasonic sound energy b. the distance traveled by the transducer c. the elapsed time or distance d. none of the above 14. The process of comparing an instrument or device with a standard is called: a. angulation b. calibration c. attenuation d. correlation 15. Another name for a compressional wave is: a. Lamb wave b. shear wave c. longitudinal wave d. transverse wave 16. Another name for Rayleigh waves is: http://ndtsamplequestions.blogspot.in/2011/05/utlevel1samplequestionset1.html
2/7
7/27/2016
NDT Question and Answer: UT Level 1 sample question set 1
a. shear waves b. longitudinal waves c. transverse waves d. surface waves 17. A material used between the face of a transducer and the test surface to permit or improve the transmission of ultrasonic vibrations from the transducer to the material being tested is called: a. a wetting agent b. a couplant c. an acoustic transmitter d. a lubricant 18. Ultrasonic testing of material where the transducer is in direct contact with the material being tested may be: a. straight beam testing b. surface wave testing c. angle beam testing d. all of the above 19. The velocity of surface waves is approximately ___________ the velocity of shear waves in the same material a. two times b. four times c. 1/2 d. 9/10 20. Under most circumstances, which of the following frequencies would result in the best resolving power? a. 1 MHz b. 5 MHz c. l0MHz d. 25MHz 21. In contact testing, the entry surface indication is sometimes referred to as: a. the initial pulse b. the back reflection c. the skip distance d. the scan path 22. When the motion of the particles of a medium is parallel to the direction of propagation, the wave being transmitted is called a: a. longitudinal wave b. shear wave c. surface wave d. lamb wave 23. When the motion of the particles of a medium is transverse to the direction of propagation, the wave being transmitted is called a: a. longitudinal wave b. shear wave c. surface wave d. Lamb wave
NDT Question and Answer: UT Level 1 sample question set 1
24. A piezoelectric material can: a. convert a longitudinal beam to a shear wave b. convert an mechanical energy to electrical energy c. create ionization in a test specimen d. produce sound waves in a coaxial cable 25. The velocity of sound waves is primarily dependent on: a. the pulse length b. the angle of incidence c. the material, material thickness, and UT frequency (time between signals on the display) d. none of the above
26. The primary purpose of reference blocks is to: a. aid the operator in obtaining maximum back reflections b. obtain the greatest sensitivity possible from an instrument c. obtain a common reproducible signal d. none of the above 27. When testing by the surface wave method, patches of oil or dirt on the surface may: a. block the progress of all sound b. attenuate the sound c. have no effect on the test d. cause both an attenuation of sound and indications on the screen 28. The piezoelectric material in the transducer: a. converts electrical energy into sound b. converts electrical energy into mechanical energy c. eliminates the signaltonoise energy d. produces high speed electrons in metals 29. The angle of incidence is: a. greater than the angle of reflection b. less than the angle of reflection c. equal to the angle of reflection d. not related to the angle of reflection 30. The gradual loss of sonic energy as the ultrasonic vibrations travel through the material is referred to as: a. reflection b. refraction c. reproducibility d. attenuation 31. When testing a plate, increasing the frequency of an ultrasonic longitudinal wave results in: a. an increase in its velocity b. a decrease in its velocity c. no change in its velocity d. a reversal in its velocity 32. The depth of a discontinuity cannot be determined when using the: a. straight beam testing method b. throughtransmission testing method http://ndtsamplequestions.blogspot.in/2011/05/utlevel1samplequestionset1.html
4/7
7/27/2016
NDT Question and Answer: UT Level 1 sample question set 1
c. angle beam testing method d. immersion testing method 33. "100 000 cycles per second" can be written: a. 0.1 kHz b. 10 kHz c. 100 kHz d. 100 MHz 34. The phenomenon whereby an ultrasonic wave changes direction when the wave crosses a boundary between materials with different velocities is called : a. refraction b. reflection c. penetration d. rarefaction 35. In a test where the transducer is not perpendicular to the inspection surface, the angle of incidence is equal to : a. the angle of refraction b. the angle of reflection c. the shear wave angle d. half the shear wave angle 36. Ultrasonic waves that travel along the surface of a material and whose particle motion is elliptical are called: a. shear waves b. transverse waves c. longitudinal wave d. Rayleigh waves 37. The interference field near the face of a transducer is often referred to as the: a. Fresnel zone b. acoustic impedance c. exponential field d. phasine zone 38. When the incident angle is chosen to be between the first and second critical angles, the ultrasonic wave mode within the part will be a: a. longitudinal wave b. shear wave c. surface wave d. Lamb wave 39. The formula used to calculate the angle of refraction within a material is called : a. Fresnel's law b. Fraunhofer's law c. Snell's law d. Lamb’s law 40. In a material with a given velocity, when frequency is increased, the wavelength will: a. not be affected b. increase c. decrease d. double http://ndtsamplequestions.blogspot.in/2011/05/utlevel1samplequestionset1.html
5/7
7/27/2016
NDT Question and Answer: UT Level 1 sample question set 1
ANSWER TO GENERAL PAPER SET 1 (40 QUESTIONS)
1.B 11.A 21.A 31.C
2.B 12.C 22.A 32.B
3.B 13.C 23.B 33.C
4.C 14.B 24.B 34.A
5.A 15.C 25.C 35.B
6.B 16.D 26.B 36.D
7.D 17.B 27.A 37.A
8.A 18.D 28.B 38.B
9.C 19.D 29.C 39.C
10.B 20.D 30.D 40.C
Posted by Wann at 09:47 +1 Recommend this on Google
Labels: ndtsamplequestions
2 comments: jyotish 1 November 2011 at 11:25 Thanks for this blog,sir. Reply
Brian Wright 16 October 2013 at 02:20 Thank you! Refreshing myself with these questions. Reply
