GENERAL MAINTENANCE COMMANDS After opening COMWIN, press “Ctrl + T”. or press LOGON key.(Green color.) LOGIN PASSW
= _root___ = _hicom_
The LOGON message followed by “>” sign will appear on the screen. This “>” is the command prompt to enter a valid command. The screen is now divided in two windows.The lower window is to enter commands & the output can be seen in the upper window.
1) To list list the the analog analog extens extension ion detai details ls DIS-SCSU: STNO=
;
Extension Number
2) To change change the COS COS of an analo analog g extens extension ion CHA-SCSU: STNO= DPLN= ITR= COS1= COS2= LCOSV1= LCOSV2= ; COS
Extension Number
Day time Class of Service Night time/after locking Class of Service Day time Least Cost Routing COS Night time/after locking Least Cost Routing
3) To change the dialing dialing type type (DTMF/PU (DTMF/PULSE) LSE) for for analog analog phone only. only. CHA-SCSU:STNO=
,DIAL=DTMF (For Tone instrument); DP (For Pulse instrument);
4) To chan change ge the the exte extensi nsion on numb number er CHA-SCSU:STNO=
,NEWNO=
;
Pls. Note : for digital extensions the SCSU command is replaced by SBCSU.
5) To change the PEN (hardware port) of an extension CHA-SXSU: STNO= TYPE=PEN PEN=
;
Extension number whose PEN is to be changed
6) To Deactivate an extension DEA-DSSU: OFFTYPE=DI TYPE=STNO STNO= ; Extension Number
7) To Activate an extension ACT-DSSU: ONTYPE=AUL TYPE=STNO STNO= ;
Extension Number
8) To check the extension’s pickup group number DIS-AUN: TYPE=STN STNO=
; ;
Extension Number
9) To check particular pickup group DIS-AUN: TYPE=GR GRNO=
; ;
Pickup Group Number
10) To check all the pickup groups in the system DIS-AUN: TYPE=SYS
;
11) To add new Pickup group:
ADD-AUN: GRNO=
STNO=
;
First check the last pickup group existing in the system and then select the next figure. If no value is given, then the system will take the group no automatically Extension number(s) to be added in the group For e.g 2000&2005&3010;
12) To add new extension in an existing pickup group ADD-AUN: GRNO= Existing group no STNO= ; Extension Number(s) to be added
13) To delete an extension from a pickup group DEL-AUN: TYPE= STN GRNO= STNO= ;
Group number in which the extension is present Extension number which is to be deleted
14) To delete pickup group completely DEL-AUN: TYPE= GR GRNO=
;
Pickup Group to be deleted
15) To see the name for a particular or all extensions DIS-PERSI: TYPE=NAME STNO= ;
Here if you give an extension number, the system Will provide the name for that extension. If you do not give any number, then system will list all the names entered in the system
14) To add name for an extension ADD-PERSI: TYPE=STN STNO=
Extension Number
NAME=
;
15) To change the name of an extension CHA-PERSI: TYPE=NAME STNO= OLDNAME= NEWNAME=
;
Extension Number Do not give any name here
16) To delete name of an extension DEL-PERSI TYPE=NAME STNO= NAME=
;
Extension number whose name to be deleted Enter the name as shown in the system listing
17) To see the particular / all locking code(s) programmed in the system DIS-PERSI: TYPE=STN STN=
;
Enter the Extension number or omit to see all the PINs entered in the system.
OR DIS-PERSI: TYPE=PIN PIN=
;
Enter the PIN number or omit to see all the PINs entered in the system.
18) To add the locking code / PIN for an extension ADD-PERSI: TYPE=STN STNO= NAME= ORG= PINC= COSXCD= NOTE:
;
Extension Number Do not give anything here Do not give anything here Do not give anything here Give four digit PIN number
Locking PIN and Mobile PIN are different feature but both the codes are same
19) To delete particular PIN number DEL-PERSI: TYPE=PIN PIN=
;
Enter PIN to be deleted
20) To activate call forwarding under no reply condition to VMS (Also COS values need to be changed) => This will be used to give the VMS facility to the user. FOR HICOM300 SYSTEMS: ADD-ZIEL: TYPE=FWD SRCNO= SI=VCE DESTNOF=; FOR HIPATH4000 SYSTEMS: ADD-ZIEL: TYPE=FWD SRCNO= SI=VCE DESTNOF=; DTYPE=CFNR ITYPE=GEN CFVAR=SYSTEM; ADD-ACTDA TYPE=STN STNO= FEATCD=FWD CFVAR=SYSTEM SI=VCE;
Enter the extension to be forwarded
Enter the extension to be forwarded
Enter the extension as entered above
21) To see the system hardware status (board status) DIS-BCSU: TYPE=TBL;
22) To deactivate particular board in the system Note down the LTG, LTU and SLOT number of that card DEA-BSSU:
OFFTYPE=DI LTG= LTU= SLOT=
;
23) To activate particular board in the system Note down the LTG, LTU and SLOT number of that card ACT-BSSU: ONTYPE=AUL LTG= LTU= SLOT= ;
24) To display date and time of the system DIS-DATE;
25) To change date and time of the system CHA-DATE: YEAR= MONTH= DAY= HOUR= MINUTE= SECOND=
;
4-digit year 2-digit month 2-digit date 2-digit hour in 24 Hr. format 2-digit minute 2-digit second
26) To activate particular trunk line Note down the require trunk line PEN. This will be obtained by giving command REG-TACSU; (for analog trunk lines) REG-TDCSU; (for ISDN BRI or PRI lines) And then select the trunk and corresponding PEN by looking at the P&T number mentioned in the command string DEA-DSSU: OFFTYPE=DI TYPE=PEN PEN1= ;
Enter LTU-LTG-SLOT-CHANNEL format
27) To activate the trunk line ACT-DSSU: ONTYPE=AUL TYPE=PEN PEN1= ;
Enter LTU-LTG-SLOT-CHANNEL format
28) To check the operator console. DIS-ACSU; This will give you the PEN no. as well as the console type: AC-4 or ACWIN. 29)
To deactivate Operator Console
DEA-DSSU: OFFTYPE=DI TYPE=PEN PEN1=
Enter LTU-LTG-SLOT-CHANNEL format
30) To activate Operator Console ACT-DSSU: ONTYPE=AUL TYPE=PEN PEN1=
Enter LTU-LTG-SLOT-CHANNEL format
30) To deactivate Serial port of the system PORT NO 1 2 3 DEA-LSSM: UNIT=A1 LN=
LINE NO 8 9 10
;
USAGE Generally Connected to remote maintenance modem Generally Connected to Call Billing PC for call data Generally to VMS PC for local maintenance
Enter the corresponding Line number
31) To activate Serial port of the system ACT-LSSM: UNIT=A1 LN=
;
Enter the corresponding Line number
31) Status display of a particular extension DIS-SDSU:ALL,,STNO,PER3,(Extension number);
If extension number is omitted, then system will provide status of all the extensions.
NOTE:
32) Status display of a particular trunk line DIS-SDSU:ALL,,PEN,PER3,1,(LTU No),(Slot No),(Channel No);
If the channel number is omitted, then system will provide status of all the channels available on that particular slot (board)
NOTE:
33) Status display of Console DIS-SDSU :ALL,,PEN,PER3,1,(LTU No),(Slot No),(Channel No);
34) In case there is some problem in the voice mail and you need to shift the trunk line to the console, then the command is CHA-TACSU:PEN=LTG-LTU-SLOT-CHANNEL, DGTPR=*,COPNO=??,DEVTYPE=TC;
Here the channel no. could be one in the complete group. Pls enter a COP here which doesnot have parameter DITW.
35) To revert back to VMS, CHA -TACSU : PEN=LTG-LTU-SLOT-CHANNEL, DGTPR=VMS hunt group no.,COPNO=??,DEVTYPE=TC;
Pls enter a COP here which has parameter DITW. 36) To update system Hard Disk (HDD) EXE-UPDAT: A1, ALL; EXE-UPDAT: BP, ALL;
Give this command twice.
Finally press LOGOFF key & close COMWIN.