MML Commands

Output BTS parameters including hopping: ZEQO:BTS=1; ZEQO:BTS=1:ALL; Output Power Control Parameters: ZEUO:BTS=1&&248; Output TRX Parameters and Timeslots state: ZERO:BTS=1&&248; Output Adjacent Cell list and parameters: ZEAO:BTS=1; ZEAO:BTS=1:ABTS=2; Output defined MA list from BSC: ZEBI; Ouput alarm records: ZEOL:1; , wh where ere 1 is the BCF number Display the log of all alarms for the whole BSC: ZAHP; Display alarm log for the selected alarm unit: ZAHP: Output HO related settings: ZEHO:BTS=1; Output frequency information: ZEEI:BTS=1; Output BTS alarm history: ZEOH:2001-09-18:BCF=xx; LapD Traffic: DMF: Output BSC parameters: ZEEO; Output co-channel adjacent cells: ZEAT; To list BSC function list: WOI; ZEGO:PAR; To list the signaling links and loading: ZOLT; BSC level clear codes: ZTVI:49:5; BTS level clear codes: ZTVI:47,2,NAKO3,0; Display VLR subscriber: ZMVI;

Display HLR subscriber: ZMII; Display number of circuit group: ZCEL:CGR=7; or ZCEL:CGR=1; Useful BSC Command - General Commands ZIWX :Display directory ZAHO : Alarm currently on ZEOL : BTS Alarms ZUSI : Unit states ZWIP : PCM circuit of identified switch -A interface Related Commands ZNEL : Signalling link states ZNET : States of the links, the link sets and the route sets ZNHI : SCCP subsystem states ZRCI : Circuit and circuit gruops ZDRI : Synchonization ZQWI : Service channel configuration ZNRI : Signalling point data -ABIS interface Related commands ZEEI : Radio Network Configuration states ZEFO : BCF states and parameters ZEQO : BTS states and parameters ZERO : TRS states and parameters ZEOL : BTS Alarm currently on ZDTI : D-channel states ZRCI : Circuit and circuit gruop ZDSB : D-channel parameters ZRBI : Semipermanent Broadband connection - BCF SW Related Commands ZEWL : Existing SW packages ZEWO : SW Configuration of a BCF ZEWP : Content of a SW package - BSC SW Related Commands ZWQO : SW packages and active package ZWQH : SW packages change history