MMI 3G Plus with Sim card retrofitted into Audi A4 B8 2009 model, the car originally came with MMI 3G. This document illustrates some of the newly added features. The same can be applied int…Full description
Full description
Audi MMI 3G HNav Update instructionsFull description
Installation 3G Network ElementsFull description
Full description
Descripción completa
Full description
Audi 3G+ MMI (A4 2014MY) Directory and File Structure, with instructions for creating music libraries, music tags and Playlists Contains: File Formats Directory Structures File Structures MP...
Audi MM third generation, one of the best system on the market today, higher performance and easier operation.Full description
node b installation
node b installation
Full description
Instructions for Updating Audi MMI 3G High ME (Bose)Full description
FEBUIFull description
This is a how-to document to recover a dead Audi MMI 3G and 3G plus units; the document is provided as best effort and for free, therefore it's expected the user to run at their own risk.Full description
This is a how-to document to recover a dead Audi MMI 3G and 3G plus units; the document is provided as best effort and for free, therefore it's expected the user to run at their own risk.Descripción completa
MMI 3G MAP Update Version 1.2 – Q1 2014 (by KG)
Step Instructions 1. Switch on the MMI 3G. 2. Enter the green menu (First press Setup and then CAR and hold both buttons down simultaneously for approx. five seconds until the display changes.)
3.
Green Menu should come up
4.
Go to Nav database update And Press on “Delete Nav HDD partition” Once partition is deleted, please reboot MMI using the following key combination:
5.
6.
Once MMI is rebooted, Enter the green menu again (First press Setup and then CAR and hold both buttons down simultaneously for approx. five seconds until the display changes.)
7.
Go to Nav database update And Change your “Active HDD Nab DB” to the region/country of your choice.
8. 9. 10.
Quit the green menu by pressing Navigation button on the key board. Insert the MAP SD card I have sent you into the MMI unit slot SD 1. First press Setup and then Return and hold both buttons down simultaneously for approx. five seconds until the display changes.
Note only: You can quit the software download process at any time by simultaneously pressing and holding the Tone and Back buttons for more than five seconds. 11. 12.
Press Update (this is the bottom right hand corner button in the MMI’s key board Choose SD 1
13.
Please wait until reading is done.
14.
Choose ROW 5.5.6 (MMI 3G)
15. 16.
Waiting until reading Metainfo is finished… (it does take long time) Choose “Standard”
NOTE: Ensure that there is no voltage changes of the vehicle's battery, i.e. don't Switch off and on anything, Don't open and close doors or windows etc... Diagnostic tests using the tester/other operations may not be performed in parallel. Switch off all unnecessary electrical equipment (auto/daytime running lights, air-conditioning etc.) in the vehicle and leave it switched off throughout the update. 17. 18.
19.
Scroll down and Press “Start download” and then “Start” Please wait... Once the system has rebooted, the download application may show a screen that displays the update progress of various devices. As soon as all devices have registered with the download application, the update process is activated and the progress is shown on screen. The system may reboot many times during the update and programming session. This is carried out completely automatically and does not require you to take any action. Once the system has rebooted, updating is continued and the "Download progress" screen is displayed many times. Programming success is displayed in the subsequent overview screen.
20. 21. 22.
Scroll down and select "Continue". Select “Aboard Documentation” Once MMI is rebooted for the final time, you’re now ready for your Map Activation.
