Alcatel-Lucent OmniPCX Enterprise Communication Server Licenses
Legal notice: Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcate Alcatel-L l-Luc ucen ent. t. All oth other er trade tradema marks rks are are the prop proper erty ty of the their ir resp respec ectiv tive e owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2007 Alcatel-Lucent. All rights reserved.
The CE mark indicates that this product conforms to the following Council Directives: - 89/336/CEE 89/336/CEE (concerning (concerning electro-magneti electro-magnetic c compatibility) compatibility) - 73/23/CEE (concerning electrical safety) - 1999/5/CE (R&TTE)
Chapter 1 Overview
1.1 Overview ....................................................................................................1.1
Chapter 2 Basic description description
Basic description ...................................................................................2.1 2.1
Chapter 3 Detailed description description
3.1 Licenses ....................................................................................................3.1 3.1 Locks ..........................................................................................................3.1 The Purchasing Process .....................................................................3.2
Tools .............................................................................................................3.2 3.2 First Sale/Initial Purchase Purchase ...........................................................................3.2
Add-ons ........................................................................................................3.2 3.2 3.3 OPS Files ...................................................................................................3.3
0-1
Risk in Case of Fraudulent Fraudulent Use .........................................................3.3
3.3 Legal Risks Risks ...................................................................................................3.3
Functional Risks Risks ..........................................................................................3.3 3.3
Changing the CS Board for Maintenance ......................................3.4 License License Move (from (from R5.1) ...................................................................3.5
Overview Overview .......................................................................................................3.5 3.5 Transfer Principle Principle ........................................................................................3.5 3.5
Protection Protection .....................................................................................................3.5 3.5
Reusing OmniPCX 4400 CPUs ..........................................................3.5 Test Sets (from R5.1.1) .........................................................................3.6
Chapter 4 Configuration procedure
Principle .....................................................................................................4.1 4.1 Managing OPS Files with “swinst” ..................................................4.1
Saving Saving OPS Files on the Call Server Server Hard Drive ......................................4.1
Restoring Restoring OPS Files from the Call Server Server Hard Hard Drive Drive .............................. 4.2
Managing OPS Files ....................................................................................4.2 4.2
Restart after Detecting an Inconsistency Inconsistency ..................................................4.6
Saving Saving OPS Files on USB Key ...................................................................4.7
Restore Restore OPS from USB Key .......................................................................4.7
Cleaning Cleaning OPS Files on USB Key ................................................................4.7
Consulting Locks Via the Configuration Tool ............................. 4.8 Processing the OPS File “.sw4760” .............................. 4.8 4.8 Incidents/Errors ......................................................................................4.8
Chapter 5 License Move
0-2
5.1 Overview ....................................................................................................5.1 License: License: “10 Phonebook Phonebook users” users” (lock 2) .......................................5.1 License: License: “CCD 5 agents agents pack” (lock 76) ........................................5.1 License: “Roaming DECT” (lock 90) ...............................................5.1 License: License: “ECC 4980 option option 10 ext pack” (lock 117) .................. 5.2 License: “DECT encryption” (lock 127) .........................................5.2 License: License: “ECC My softphone softphone 10 ext pack” (lock 129) .............. 5.2 Set Licenses Licenses (locks (locks 173, 174, 176 and 177) ..................................5.2
On an ABC-F Network Network .................................................................................5.3 5.3
On a Network Network other than an ABC-F Network Network ............................................5.3
License: License: “10 Mobile Mobile users” users” (lock 175) ............................................5.3 License: “G729A Client” (lock 197) .................................................5.4 License: “OmniCellular client for 10 users” (lock 308) ............ 5.4 License: License: “Class service service (CLIP (CLIP)) for for 10 analog analog users” users” (lock 310) ........................................................................................................................5.4
Chapter 6 List of Software Locks
List of Alcatel-Lucent OmniPCX Enterprise CS Locks ............. 6.1
Note 1 ...........................................................................................................6.13
Note 2 ...........................................................................................................6.13
Note 3 ...........................................................................................................6.14
Note 4 ...........................................................................................................6.14
Note 5 ...........................................................................................................6.14
0-3
0-4
1 1.1
Overview The system of licenses and locks allows the customer to purchase only the features that he needs nee ds.. The The Ca Call ll Serv Server er softw software are is sold sold as a sing single le pack packag age e with with a full full Alca Alcatel tel-Lu -Luce cent nt OmniPCX Enterprise Communication Server feature set. Under these conditions, it would be unfair to charge customers for features they do not use.
1-1
Chapter
1-2
1
2 2.1
Basic description The custom customer er purchas purchases es one (or more) more) licens licenses es for each feature feature require required. d. Licens Licenses es are marketing packages or sales "units". Licenses have matching locks that are functional units. The locks, installed on the Call Server, allow the features purchased to be used. Purchase of licenses results in delivery of OPS (Order Preparation System) files. These lock files, also called "OPS files", files", are installed on the Alcatel-Lucent Alcatel-Lucent OmniPCX Enterprise Enterprise CS. They contain: -
A list list of the locks locks purchas purchased. ed.
-
The number number of the syste system m supporti supporting ng the Call Call Server. Server. This This number number is referred referred to as the "CPU "CPU iden identi tifi fier er"" or CP CPU U ID". ID". Syst System em num numbe berr (CPU (CPU ID) ID) is a uniq unique ue numb number er store stored d in PROM. It can be read by the BIOS. For a duplicated Call Server, there are two identifiers (one for each Call Server).
-
A soft softwa ware re key. The softw softwar are e key key is an encr encryp ypted ted data data item item that that depe depends nds on the locks locks purchased and system numbers (CPU IDs). The software key guarantees that the OPS files are of Alcatel-Luce Alcatel-Lucent nt origin in order to prevent illegal illegal use.
With With R5. R5.1, 1, Alcate Alcatel-L l-Luce ucent nt introd introduce uced d the concep conceptt of "licen "license se move" move" (trans (transfer) fer).. This This feat feature ure allows licenses to be moved from one machine to another, provided that both machines belong to the same customer.
2-1
Chapter
2-2
2
3 3.1
Licenses There are several types of licenses: -
“Servic Service e Authoriz Authorizati ation on License License”. ”. Purc Purcha hase se of this this type type of lice licens nse e auth author oriz izes es the the customer to use this service. For example, ”E-CS REDUNDANCY” authorizes use of a duplicated Call Server.
-
“License by steps”. steps”. Purchase of this type of license allows a certain number of users to access a service. For example, “PHONEBOOK 10 EXT” authorizes" 10 sets to use the "Dia "Diall by Na Name me servi service ce.. If you you wa want nt 30 sets sets to have have acce access ss to this this servi service, ce, you mu must st purchase 3 licenses.
-
“License by stage”. stage”. Purchase of this type of license allows a certain number of users to access a service. For example, “HOTEL UP TO 150 EXT” authorizes the creation of a maximum of 150 customer sets in a hotel. Another license authorizes the creation of a hotel with over 500 sets. A higher release (stage) can only be purchased if a lower release has already been purchased. purchased.
Alcatel-Lucent Marketing Services can provide a complete list of licenses. Special case of the OmniVista the OmniVista 4760 The OmniVista 4760 has its own license system, similar to that of the Call Server. In addition, for an OmniVista 4760 to supervise an Alcatel-Lucent OmniPCX Enterprise CS, the latter must have a license license which allows such supervision. supervision. There are several supervision supervision licenses:
3.2
-
Conf Co nfig igur urat atio ion n
-
Alarms
-
Acco Accoun unti ting ng (char (chargi ging ng))
-
Dire Direct ctor ory y
-
Traff Traffic ic Anal Analys ysis is
Locks Each lock has: -
A maximum maximum value value that that depends depends on the the license licenses s acquired acquired.. The maximu maximum m value value of a lock can be: • 0 or 1 when when it corresponds corresponds to a "service "service authoriz authorization" ation" license. license. 0: service service prohibite prohibited, d, 1: service authorized. • 0 to 9999 9999 (or (or 0 to 09999 099999 9 as of R8 R8.0 .0)) wh when en it corr corres espo pond nds s to "numb "number er of user users" s" licenses. The value of the lock is then equal to the maximum number of authorized users. For example, the “PHONEBOOK EXT” lock sets the number of users authorized to use the "Dial by Name" service. • The value value 9999/099999 9999/099999 indicates indicates that that the feature is authorize authorized d for unlimit unlimited ed use.
-
A current current value value that represen represents ts the the actual actual number number of of users users on this service. service.
Some locks are referred to as "open" when they no longer correspond to a marketing offer.
3-1
Chapter
3
These locks are systematical systematically ly positioned at the maximum value. Some locks are referred to as "not used" when the Call Server software no longer uses them.
3.3
The Purchasing Process
3.3.1
Tools Alcatel-Lucent has developed the following tools: -
eCom: the the Alcatel-Luce Alcatel-Lucent nt Internet Internet server server dedicated dedicated to taking taking purchase purchase orders orders for licenses licenses and also hardware. hardware.
-
Acti Actis: s: a softw software are tool provi providi ding ng assi assist stanc ance e in drawin drawing g up a sale sales s propo proposa sal. l. Actis Actis runs runs off-line off-line on the marketing marketing representative's representative's PC (laptop (laptop for example).
-
eLP: a software software tool tool providing providing and and associati associating ng a new new CPU ID in the OPS OPS files. files.
There may be other tools for specific needs.
3.3. 3.3.2 2
Firs Firstt Sale Sale/I /Ini niti tial al Purc Purcha hase se The marketing representative draws up a proposal tailored to the customer's needs. He uses Actis to do this. The main features of Actis are: -
Integra Inte grated ted hardwa hardware re and and feat feature ure catalo catalogs. gs.
-
Existi Existing ng prop proposal osals s can can be copied copied/mod /modifi ified. ed.
-
Consis Con sisten tency cy of of selec selected ted opt option ions s is checke checked. d.
When the proposal is approved, the offer becomes an order which is transmitted to the eCom server. The eCom server performs the following following operations: -
Stores Stores all custome customerr config configurat uration ions. s.
-
Forward Forwards s the hardw hardware are order order to the the produc productio tion n departm department. ent.
-
Produc Produces es and sends sends the OPS files. files.
Order Orders s can can also also be direc directl tly y plac placed ed on eC eCom om (wit (witho hout ut usin using g Acti Actis) s).. Ho Howe weve ver, r, the the eC eCom om interface offers fewer features and requires Internet access.
3.3.3
Add-ons There are two procedures: procedures:
3-2
-
Via Actis: Actis: The marketin marketing g represent representati ative ve imports imports the old customer customer configur configurati ation on stored stored on the eCom server. He then modifies this jointly with the customer and exports it back to eCom. As at initial purchase, eCom saves the new configuration, transmits the hardware order to the production department if necessary, and produces and sends the new OPS files. This is the recommended procedure. procedure. It is also also poss possib ible le to reco recove verr the the OPS OPS file files s from from the the Ca Call ll Serv Server er wo work rk file files s usin using g "photoconfig". This procedure is used if the OPS files are not available on Actis or eCom. This situation arises when commissionin commissioning g does not comply with standard procedure.
-
Direct Directly ly on eCom: After After connecti connecting ng to the eCom server, server, the marketi marketing ng represen representat tative ive can
modify the saved configuration. If necessary, a hardware order is sent to the production department and new OPS files are sent.
3.4
OPS Files The OPS files are the following: 1. .swk 2. .hw 3. .sw4 .sw4760 760 (only if a OmniVista OmniVista 4760 is ordered) 4. hardware.mao 5. .zip is a string of characters specific to the site. Files 1 and 3 are installed whatever the command mode. Files 2, 4 and 5 are installed with commands performed via ACTIS. When When an add-on add-on is instal installed led,, the Alcatel-L Alcatel-Luce ucent nt OmniPCX OmniPCX Enterpris Enterprise e CS may have to be reboo reboote ted d for inst instal alla lati tion on of the the new new OPS OPS file files. s. Re Rebo boot ot ma may y or may not be nece necess ssar ary, y, depending on the locks modified. For information on which locks require the Alcatel-Lucent OmniPCX Enterprise CS to be rebooted, see the module the module Licenses - List of Software Locks . Locks . Caution: The .swk file is only produced by eCom. It is only accepted by the system if the software key is consistent with the licenses.
3.5 3. 5
Risk Ri sk in Cas ase e of Fr Frau aud dul ulen entt Us Use e
3.5.1
Legal Risks It is ille illega gall to dupl duplic icat ate e soft softwa ware re progr program ams s or to unloc unlock k a feat feature ure with without out aut autho hori riza zati tion on.. Offenders are liable to be prosecuted by law.
3.5. .5.2
Functional Risk isks When the system detects an inconsistency in the OPS files, it suspects illegal use and runs in degraded mode. The phases of this degraded mode are: -
Action 1 (as soon as illegal use is detected) • Disp Displa lays ys a me mess ssag age e on the atten attenda dant nt set as soon soon as it enter enters s idle idle mode, mode, with with a mandatory mandatory order for the attendant attendant to acknowledge acknowledge this message. • De Dele lete tes s the the scre screen en of the the term termin inal al syst system em,, and and disp displa lays ys the the inci incide dent nt me mess ssag age. e. Acknowledgement is mandatory. • Stores Stores the incide incident nt in in the the incid incidents ents file. file. • Con Contin tinuous uous ringin ringing g on an alarm alarm set. set. • Some Some manage manageme ment nt command commands s can can the then n no longer longer be perfo perform rmed ed and result result in the the following error: "Software protection error".
-
Action 2 (4 hours later):
3-3
Chapter
3
• -
Displa Displays ys a predef predefine ined d string string on all all sets sets with with a displa display. y.
Action 3 (8 hours later): • Loo Loopb pbac ack k on on act actio ions ns 1 and and 2.
The system checks its OPS files every four hours. If an inconsistency is detected, it initiates the degraded mode procedure. procedure. Note: If the OPS files do not contain a Call Server Identificatio Identification n (CPU_Id), the system suspects a maintenance maintenance operation and postpones the degraded mode procedure for 30 days.
3.6 3. 6
Chan Ch angi ging ng th the e CS Bo Boar ard d fo forr Ma Main inte tena nanc nce e The CS board (Call Server support) may have to be changed. In this case, the identifier of the new board no longer corresponds to the identifier declared in the OPS files. The installer has 30 days (before degraded degraded mode is triggered) to provide provide notification notification of this change of situation.
Figure 3.1: Block Diagram of OPS File Update Operations Following Following CS Board Replacement Replacement 1. Diagnosis Diagnosis and replacement replacement of the CS board (replacement includes includes hardware operations, operations, software loading and configuration). 2. Retrieval of site information: • The numb number er of the the new new CS board board.. • The numb number er of the the old old CS board board.. 3. Site information information sent sent to the eCom server. server. 4. Retrieval Retrieval of new OPS OPS files. 5. Installation Installation of the new OPS OPS files on the site. site.
3-4
3.7
License Move (from R5.1)
3.7.1
Overview A license is acquired for a specified PCX. If you want to transfer a license for a feature from a source PCX to a target PCX, you must carry out a "license move". When moving licenses, the licenses not used on the source PCX are recovered for use on the target PCX. Licenses are moved using the eCom the eCom server. server. Not all licenses can be moved. Alcatel-Lucent considers that the transfer of some licenses is not recommended due to the complexity of their implementation. See the list of transferable licenses licenses in the the module module Licenses - List of Software Locks . Locks . Note: License transfer/move can only be performed between two PCXs belonging to the same customer.
3.7.2 .7.2
Tran Trans sfer fer Princ rincip iple le To carry out a license license move the installation installation technician performs performs the following following operations: operations: -
Creat Creates es new OPS OPS files files on the the eCom serve serverr (fewer (fewer on the sourc source e PCX and more more on the the target PCX).
-
Instal Installs ls the OPS files files on the PCXs. PCXs.
-
Increases Increases services services on the "destinati "destination" on" PCX and decreases decreases service services s on the "source" "source" PCX.
-
Recove Reco vers rs the the ackno acknowl wledg edgem emen entt code code from from the the sour source ce PC PCX. X. This This acknow acknowle ledge dgeme ment nt proves that the OPS files have been installed installed correctly and avoids any illegal illegal use.
-
Enters Enters the acknow acknowled ledgem gement ent code code on on eCom. eCom.
The acknowledgement code must be entered on eCom at the latest 30 days after creation of the OPS files. If this deadline is not respected, Alcatel-Lucent will take legal action against the organization performing the license move. A specific procedure is required to move a lock, see the module Licenses - Licens License e Move . Move .
3.7.3
Protection Each Each OPS OPS file file conta contain ins s a vers versio ion n numbe number. r. To preve prevent nt ille illegal gal use, use, the the syst system em cons consid ider ers s installation of OPS files with a version number lower than that of the active files as constituting an inconsistency. inconsistency. The installation installation technician technician has 5 days to rectify this. Caution: This protective mechanism complicates the installation technician's task. If the newly installed OPS files present a problem, returning to the previous OPS files will result in inconsistency. The installation technician will have to react promptly in order to rectify the inconsistency.
3.8
Reusing OmniPCX 4400 CPUs CPU5-3 and CPU6 are reusable on a Alcatel-Lucent OmniPCX Enterprise CS (from R5.1). There are two possible options:
3-5
Chapter
3.9
3
-
Send Send the CPU CPU back to the fact factory ory for for an upda update te.. The hard keys keys are then then remov removed ed.. The new software, Bios and appropriate appropriate OPS files are loaded.
-
Change Chan ge only only soft softwa ware re vers versio ion n on site site.. The The hard hard keys keys are are kept kept,, an eC eCom om busi busine ness ss reference reference called "virtual CPU-Id" is given. The appropriate appropriate OPS files are loaded.
Test Sets (from R5.1.1) Various types of sets must be used to test the quality of voice calls on an Alcatel-Lucent OmniPCX Enterprise CS. However, some customer configurations do not include all types of sets. For such such specif specific ic cases, cases, Alcate Alcatel-Lu l-Lucen centt auth authori orizes zes (withou (withoutt it being being necess necessary ary to have have the corresponding corresponding license) license) creation of the following sets (one of each type):
3-6
-
One One IP Phon Phone e
-
One One anal analog og set set
-
One UA set
4 4.1
Principle To configure locks, the manager must perform the following following operations: operations: -
Instal Installl the OPS OPS files files to apply apply the the licens licenses es acquir acquired: ed: § § Restoring OPS Files from the Call Server Hard Drive
-
Back Back up the the OPS file files s in order order to perf perfor orm m an add-o add-on: n: § Saving OPS Files on the Call Server Hard Drive
-
Manag Man age e OPS OPS file files: s: § § Managing OPS Files
-
Restart Restart after after dete detecti cting ng an inconsi inconsiste stency ncy:: § Restar Restartt after Detecting an Inconsi Inconsistency stency
For these operations, operations, the manager can use the following tools: - swinst: swinst: procedure procedure described described below. -
OmniVista OmniVista 4760: 4760: p procedur rocedure e described described in the the OmniVista OmniVista 4760 documentation. documentation.
- Wizard: Wizard: procedure procedure described in the Wizard documentation. documentation.
4.2 4. 2
Mana Ma nag gin ing g OP OPS S Fi File les s wi with th “s “sw win inst st” ” OPS configuration access: swinst > Expert menu > OPS configuration OPS configuration general menu:
The "swinst" tool has a number of functions. Only functions related to OPS files are described here. For a full description of the "swinst" tool, see the module Swinst - Detailed description.
4.2. 4.2.1 1
Savi Saving ng OPS OPS File Files s on the the Ca Call ll Serv Server er Ha Hard rd Dr Driv ive e Access: “swinst > Expert menu > OPS configuration > Backup OPS files on cpu disk”
4-1
Chapter
4
This This comma command nd is used used to recre recreat ate e OPS OPS file files s from from wo work rk file files. s. The The file files s creat created ed with with this this command are available in either the directory “/usr4/BACKUP/OPS” or "DHS3d "DH S3dyn/ yn/BAC BACKUP KUP/OP /OPS". S". This This ope operati ration on is impleme implemente nted d in the case case of an add add-on, -on, it is sometim sometimes es called called “photoc “photoconfi onfig”. g”. A file file transfe transferr operati operation on (using (using ftp, ftp, for exampl example) e) must must be performed performed to retrieve retrieve these files from the Call Server.
4.2. 4.2.2 2
Rest Re stor orin ing g OPS OPS File Files s from from the the Ca Call ll Serv Server er Ha Hard rd Dr Driv ive e Access: “swinst > Expert menu > OPS configuration > Restore OPS from cpu disk” This command is used to install the OPS files previously copied (via ftp, for example) in the directory directory “/usr4/BACK “/usr4/BACKUP/OP UP/OPS”. S”. In some cases, swinst will will ask for for the the Ca Call ll Serv Server er to be rebooted rebooted to apply these changes. changes. Caution 1: Using the swinst tool is the only correct method for installing the OPS files. Any other method (for example, direct copy) would cause the system to switch to fraudulent (illegal) use status with the corresponding consequences (operation in degraded mode).
For an add-on which affects only the licenses, licenses, the only file provided is .swk .swk.. For an add-on which affects the licenses and a hardware item, the .swk, .hw, hardware.mao, offerld.zip and .sw4760 (optional) files are provided. If the files to be installed have a version (release) number lower than that of the files currently installed, the installation takes place. However, the system switches to fraudulent (illegal) use status. The manager is informed of this by a warning message and has five days to rectify the situation. situation. This check is linked to the "license move" procedure. Caution 2: When you install OPS files for the large equipment capacity feature on a Call Server in small equipment capacity, swinst will ask you to reboot the system to take into account the large capa- city. You must then re-install the OPS files. You can use the command siteid to see the equipment capacity level of the Call Server.
4.2.3 .2.3
Man Ma nagin aging g OPS OPS File iles Access: “swinst > Expert menu > OPS configuration > OPS administration”
4.2.3 .2.3.1 .1
4-2
Main Ma in Me Menu nu
Note: This “swinst” menu is identical to the “spadmin” maintenance command.
4.2.3. 4.2 .3.2 2
Displa Display y Curren Currentt Cou Counte nters/ rs/Loc Locks ks (1) Result of the command: command:
1. “PANIC “PANIC Flag” status. The “Panic Flag” indicates indicates that an inconsistency inconsistency has been detected in the OPS files and that the degraded mode procedures of the system are activated: • PANIC PANIC Flag Flag = 0 normal normal ope operati ration. on. • PANIC PANIC Flag Flag = 1 opera operatio tion n in degrade degraded d mode. mode. 2. List of counters corresponding corresponding to each lock. For example, example, if the manager has authorized "Call By Name" for 9 users, the “Call By Names Counter” is equal to 9.
4.2. 4.2.3. 3.3 3
Disp Displa lay y Acti Active ve File File (2) (2)
4.2.3. 4.2 .3.3.1 3.1 Genera Generall Case Case Result of the command: command:
4-3
Chapter
4
1. Reserved for Alcatel-Lucent support. 2. Displays OPS file version. 3. Reserved for Alcatel-Lucent support. 4. Displays Displays the software software key or checksum. checksum. 5. Displays Displays authorized authorized CPU-Ids. If the Call Server is duplicated, duplicated, there are two CPU-Ids. 6. Displa Displays ys the busines business s referenc reference e for eCom. This reference reference is either either the CPU CPU-Id -Id or, if the hard key is used, an arbitrary reference provided by eCom. This arbitrary reference is sometimes called a virtual "CPU-Id". 7. Indicates Indicates that local system CPU-Id CPU-Id has been found in the list of authorized CPU-Ids. CPU-Ids. 8. Displays the authorized OmniVista 4760 CPU-Id. 9. File creation creation date. 10. Displays 10. Displays the OPS version from which this file was created. 11. List 11. List of locks with the maximum value authorized (depending on purchase options). For moveable moveable locks, the system adds the current value in brackets. 12. Displays 12. Displays hard keys if present or 0000 if there are no hard keys present.
4.2.3. 4.2 .3.3.2 3.2 Errors Errors Result of the command: command:
4-4
................. 1. Displays Displays the business business reference for eCom. eCom. 2. Displays that CPU-Id is incorrect. 3. Displays Displays the number of days remaining remaining before the procedure for switchover switchover to degraded degraded operating operating mode is launched.
4.2.3. 4.2 .3.4 4
Check Che ck Active Active File File Coh Cohere erency ncy/Co /Consi nsiste stency ncy (3) The tool checks whether the checksum is compatible with the locks and Call Server number. Result of the command when the check is correct:
Result of the command when the check is incorrect:
4.2. 4.2.3. 3.5 5
Inst Instal alll a Ne New w File File (4) (4) This command is identical identical to § to § Restoring OPS Files from the Call Server Hard Drive .
4.2.3. 4.2 .3.6 6
Read Rea d the System System Key/Ca Key/Callll Server Server Ide Identi ntifie fierr (5) (5) The tool displays displays Call Server number. For example: If the identifier is a CPU-Id:
If the identifier is a hard key:
4.2.3. 4.2 .3.7 7
CPU-Ids CPU -Ids (Call (Call Server Server number number)) Manage Managemen mentt (6) This command allows an installation technician to carry out an on-site Call Server add-on or Call Server replacement. For sites which do not have access to eCom, the information may be sent by telephone or fax. Sub-menu:
4-5
Chapter
4
The tool asks the operator to enter Call Server number(s) and the new software key. The operation operation is only performed if the new software key is consistent. consistent.
4.2.3. 4.2 .3.8 8
Displa Display y Active Active and New File File (7) This command displays the contents of the current file and of the file to be installed in two columns. The file to be installed should be called “software.new” and should be located in the directo directory ry “/DHS3 “/DHS3data data/ma /mao”. o”. Displa Display y format format is the same same as that shown in sectio section n § Display Active File (2) . (2) .
4.2. 4.2.3. 3.9 9
Disp Displa lay y OPS OPS Limi Limits ts (8) (8)
This This comm command and disp displa lays ys the maxim maximum um valu values es that that can can be conf config igur ured ed on this this site site.. Thes These e maximum values depend on the software used and on the hardware configuration of the site. Consequently, there is no reason to purchase locks for higher values as they cannot be used.
4.2.3. 4.2 .3.10 10
Displa Display y ACK Cod Code e (9) This command command displa displays ys the acknow acknowled ledgem gement ent code. code. The acknow acknowled ledgem gement ent code code is used used when a license license is transferred transferred (moved).
4.2. 4.2.4 4
Rest Re star artt afte afterr De Dete tect ctin ing g an Inco Incons nsis iste tenc ncy y Access: “swinst > Expert menu > OPS configuration > Software protection recover”
4-6
This command is used when an inconsistency has been detected. This command is used to restart station display for a duration of four hours, which gives the technician time to intervene. This command can be repeated ten times. A reset must then be performed to re-validate the features. features. This operation operation was formerly performed using the "sprecover" "sprecover" command.
4.2.5 .2.5
Sav Saving ing OPS OPS File Files s on US USB B Key This option allows to save local or remote OPS files on an USB key. This function is only available available on CPU7 step2, Appliance Appliance Server and Blade Server. Access: swinst > Expert menu > OPS configuration > Backup OPS files on USB key The user is prompted to select the Alcatel-Lucent Alcatel-Lucent OmniPCX Enterprise Enterprise CS.
By default, the local OPS files are saved. After confirmation, the OPS files of the selected Alcatel-Lucent OmniPCX Enterprise CS are saved on the USB key. Note: The USB key must be previously previously enabled (see: module Swinst - Operation § Enable Enable [Disable] USB Key).
4.2.6 .2.6
Res Re store tore OPS OPS from from US USB B Ke Key y This option allows to restore OPS files from an USB key. This function is only available on CPU7 step2, Appliance Server and Blade Server. Access: swinst > Expert menu > OPS configuration > Restore OPS from USB key Select the Alcatel-Lucent OmniPCX Enterprise CS.
After confirmation, the selected files are installed on the local or on the remote Alcatel-Lucent OmniPCX Enterprise CS. Note: The USB key must be previously previously enabled (see: module Swinst - Operation § Enable Enable [Disable] USB Key).
4.2. 4.2.7 7
Clea Cleani ning ng OPS OPS File Files s on US USB B Ke Key y Access: swinst > Expert menu > OPS configuration > Clean OPS files on USB key Select the Alcatel-Lucent OmniPCX Enterprise CS.
4-7
Chapter
4
The list of the OPS files is displayed and after confirmation, the selected files are deleted. This function function is only available available on CPU7 step2, Appliance Appliance Server and Blade Server.
4.3 4. 3
Cons Co nsul ulti ting ng Lo Lock cks s Vi Via a th the e Co Conf nfig igur urat atio ion n To Tool ol Lock values can be viewed using the configuration configuration tool (“mgr” or “OmniVista 4760”). Object name: “System “System”” > “Software Package” Package” Attributes:
4.4 4. 4
Package Number
: Select Select the name of the lock to be consulted. consulted.
Authorized Limit
: Displays Displays the maximum maximum value authorized authorized for this lock.
Current Value
: Displays Displays the current value of the lock.
Proc Pr oces essi sing ng th the e OP OPS S Fi File le “< “ d>.s .sw4 w476 760” 0” The OmniVis OmniVista ta 4760 OPS file file “ ld>.sw .sw476 4760” 0” is not fun functi ctional onal on the Alcatel Alcatel-Lu -Lucen centt OmniPCX Enterprise CS. However, this file is used by the ACTIS software for add-ons when eCom eC om is not not used used.. The The AC ACTI TIS S proc proced edur ure e firs firstt requ requir ires es the the OPS OPS file files s to be retr retrie ieve ved d (“photoconfig” operation). If the “.sw4760” file is not present on the PCX, it is easy to forget it. To avoid this problem, it is highly advisable to copy this file to the PCX at installation. To do this, proceed as follows: -
Transfer, Transfer, via ftp, the the file file “.s “.sw4760” w4760” to the directory directory “/usr4/BA “/usr4/BACKUP CKUP/OPS”. /OPS”.
-
Acti Activa vate te the OPS OPS file files s (com (comma mand nd,, “swin “swinst st > Exper Expertt menu menu > OPS OPS confi configur gurati ation on > Restore OPS from cpu disk”). disk”). The “.sw4760” file is then saved, with the other OPS files, to the directory “/usr3/mao”. “/usr3/mao”.
During the “photoconfig” operation (“swinst (“swinst > Expert menu > OPS configuration > Save OPS files on cpu disk”) the the file file “ d>.s .sw4 w476 760” 0” is copi copied ed to the the dire direct ctor ory y “/usr4/BACKUP/OPS” with all the other OPS files. When the add-on operation is complete, do not forget to place the new file on the PCX.
4.5
Incidents/Errors If the system detects an inconsistency, it outputs fault "5906" on a daily basis: "xxx day(s) remaining before changing changing to fraudulent fraudulent state" The installation installation technician is thus informed informed of the time remaining remaining to rectify rectify the problem. problem.
4-8
5 5.1
Overview The procedures described below are for one license. However, it is possible to move several licenses licenses simultaneously simultaneously (licenses of the same type or of different types). The eCo eCom m server server accepts accepts deferred deferred acknow acknowled ledgeme gement, nt, which which allows allows the OPS files for the source and destination destination PCXs to be created created simultaneousl simultaneously. y. In general, the following rule must be respected: On a PCX, you must always have locks for the services declared. Therefore, before "reducing" (the scope of) a lock, you must "reduce" the the corr corres espo pond ndin ing g serv servic ice e and and befo before re "inc "incre reas asin ing" g" a serv servic ice e you you mu must st incr increa ease se the the corresponding lock.
5.2 5. 2
5.3 5. 3
Lice Li cens nse: e: “1 “10 0 Ph Phon oneb eboo ook k us user ers” s” (l (loc ock k 2) -
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Delete Delete rights rights for for the "Dial "Dial by name" name" feat feature ure on the the selecte selected d sets. sets. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Assign Assign "Dia "Diall by name" name" righ rights ts to the the selec selected ted sets sets..
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Lice Li cens nse: e: “C “CCD CD 5 ag agen ents ts pa pack ck” ” (l (loc ock k 76 76)) Check that lock 13 (E-CS Engine) is "sufficient" "sufficient" on the destination destination node.
5.4 5. 4
-
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Log off off the the agen agents ts to be mo move ved. d. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code. • Re Rebo boot ot the the cabi cabine net. t.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Re Rebo boot ot the the cabi cabine net. t. • Log on the age agents nts that have have been been moved. moved.
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Lice Li cens nse: e: “R “Roa oam min ing g DE DECT CT” ” (l (loc ock k 90 90))
5-1
Chapter
5
Check that locks 175 (Mobile users) and 82 (Mobile terminal) are sufficient on the destination node. Proceed in similar manner as for moving the license for “10 Phonebook users” (lock 2).
5.5 5. 5
Lice Li cens nse: e: “E “ECC CC 49 4980 80 op opti tion on 10 ex extt pa pack ck” ” (l (loc ock k 11 117) 7) In order to transfer a number (n) of licenses, you must also transfer: -
"n" 116 locks locks (4980 (4980 standar standard). d).
-
"n" 129 locks locks (4980 (4980 groupwa groupware). re).
-
"n" 197 locks locks (G729 (G729 client client)) or 198 locks (G723 (G723 client client)) if the 4980s are are linked linked to multime multimedia dia 2 PCs.
Proceed in similar manner as for lock 2 "Phonebook users", but delete rights to the "4980 professional" feature (using the softphone administration tool) instead of deleting rights to the "Dial by name" feature. feature.
5.6 5. 6
Lice Li cens nse: e: “D “DEC ECT T en encr cryp ypti tion on” ” (l (loc ock k 12 127) 7) Check that locks 175 (Mobile users) and 82 (Mobile terminal) are sufficient on the destination node.
5.7 5. 7
-
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Delete Delete the the right right to encry encrypti ption on (only (only if the the lock lock chang changes es to 0). 0). • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Add the the encryp encryptio tion n right right (if this this has has not alre already ady been been done). done).
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Lice Li cens nse: e: “E “ECC CC My so soft ftph phon one e 10 ex extt pa pack ck” ” (l (loc ock k 12 129) 9) In order to transfer a number (n) of licenses, you must also transfer: -
"n" 116 locks locks (4980 (4980 standar standard). d).
-
"n" 197 locks locks (G729 (G729 client client)) or 198 locks (G723 (G723 client client)) if the 4980s are are linked linked to multime multimedia dia 2 PCs.
Proceed in similar manner as for lock 2 "Phonebook users", but delete rights to the "4980 groupware" feature (using the softphone administration tool) instead of deleting rights to the "Dial by name" feature. feature.
5.8 5. 8
Sett Li Se Lice cens nses es (l (loc ocks ks 17 173, 3, 17 174, 4, 17 176 6 an and d 17 177) 7) Licenses concerned: -
5-2
Licens Licenses: es: “10 UA fixed fixed u user sers” s” (lock (lock 173). 173).
-
Licens Licenses: es: “10 analog analog users” users” (lock (lock 174) 174)..
-
Licens Licenses: es: “10 IP users” users” (lock (lock 176 176). ).
-
Licens Licenses: es: “10 SIP users” users” (lock (lock 177). 177).
On the destination destination node, check that lock 13: “E-CS engine” engine” is sufficient. sufficient. In addition: addition:
5.8. .8.1
5.8. 5.8.2 2
5.9 5. 9
-
If an IP set set transfer transfer is performe performed, d, check check that lock lock 138 "IP "IP equipments equipments"" is equal equal to lock lock 176.
-
If a SIP SIP set transfer transfer is performe performed, d, check check that lock 185 185 "SIP "SIP gateway" gateway" is is set.
On an ABC-F Network -
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Wireli Wireline ne (static (static)) sets (UA and analog analog): ): delete delete physica physicall equipmen equipmentt from the sets which which are to be transferred. • IP sets: sets: Change Change set set type from from "IP" "IP" to "non "non IP" for for the sets sets to be trans transfer ferred. red. • SIP sets: sets: Change Change set set type type from "SIP" to "Analog" "Analog" for for the sets to to be transfer transferred. red. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code. • Move Move the sets sets to be transf transferre erred. d.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Wireline Wireline (static) (static) sets (UA (UA and and analog): analog): Assign Assign new physical physical equipment equipment.. • IP sets sets:: Chang Change e set type type from from "non "non IP" IP" to to "IP". "IP". • SIP sets: sets: Chang Change e set set type type to to "SIP "SIP". ".
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
On a Ne Netw twor ork k othe otherr than than an AB ABCC-F F Ne Netw twor ork k -
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Export Export data data from from the sets sets to to be moved moved to the the OmniVi OmniVista sta 4760 4760 or or 4760i. 4760i. • Che Check ck the compati compatibil bility ity of the data with with the capabili capabilitie ties s of the destinati destination on PCX (and make any modifications required). • Delete Delete the sets sets transf transferre erred. d. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Import Import set set data data ffrom rom the the Omni OmniVis Vista ta 4760 4760 or or 4760i. 4760i.
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Lice Li cens nse: e: “1 “10 0 Mo Mobi bile le us user ers” s” (l (loc ock k 17 175) 5)
5-3
Chapter
5
On the destination node, check that lock 13: "E-CS engine is sufficient and that locks 175 and 82 have the same values.
5.10 5. 10
-
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Export Export data data from from the sets sets to to be moved moved to the the OmniVi OmniVista sta 4760 4760 or or 4760i. 4760i. • Delete Delete the mob mobile ile sets sets to to be be move moved. d. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Reboot the the cabinet cabinet if the license license is greater than than 250, 250, • Import Import set set data data ffrom rom the the Omni OmniVis Vista ta 4760 4760 or or 4760i. 4760i.
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Lice Li cens nse: e: “G “G72 729A 9A Cl Clie ient nt” ” (l (loc ock k 19 197) 7) On the destination node, check that lock 13 (E-CS Engine) is sufficient. In addition, ensure that locks 138 (IP equipments) and 176 (10 IP users) have the same value as lock 197. Proceed in similar manner as when moving the license for “10 UA fixed users” (lock 173).
5.11 5.1 1
Licens Lic ense: e: “Om “OmniC niCell ellula ularr cli client ent for 10 use users” rs” (lo (lock ck 308 308)) On the destination destination node, check that lock 13 (E-CS Engine) is sufficient. sufficient.
5.12 5.1 2
-
On eCom: eCom: create create n new ew OPS OPS files files for for the source and destinat destination ion PCXs. PCXs.
-
On the the sour source ce PC PCX: X: • Export data from from “Cellular “Cellular Client” Client” sets to be moved moved to to the OmniVi OmniVista sta 4760 4760 or 4760i. 4760i. • Delete Delete the “Cellu “Cellular lar Client” Client” sets. sets. • Instal Installl the reduce reduced d OPS files. files. • Rea Read d the acknow acknowled ledgem gement ent code. code.
-
On the the dest destin inat atio ion n PC PCX: X: • Instal Installl the increa increased sed OPS files. files. • Reboot the cabinet. cabinet. • Import the “Cellul “Cellular ar Client” Client” sets from the the OmniVis OmniVista ta 4760 4760 or 4760i.
-
On eCom: eCom: Enter Enter the the acknow acknowledg ledgeme ement nt code code read read on the sourc source e PCX. PCX.
Licens Lic ense: e: “Cl “Class ass ser servic vice e (CL (CLIP) IP) for 10 ana analog log use users” rs” (lo (lock ck 310 310)) On the destination node, check that lock 13 (E-CS Engine) is sufficient. In addition, if the sets are assigned to eZ32 boards, check that lock 174 (analog users) is sufficient. Proceed in similar manner as for lock 2 "Phonebook users".
5-4
6 6.1 6. 1
List Li st of Al Alca cate tell-Lu Luce cent nt Om Omni niPC PCX X En Ente terp rpri rise se CS Lo Lock cks s A lock is "Open" when it corresponds to a free license. It is then set to 9999 or to 099999 as of R8.0. An "unused" lock is set to 0. It is not displayed by the “swinst” or “spadmin” commands. For some locks, the value "0" cannot be used because the first corresponding licenses are free. The "Moveable" column indicates whether the lock can be moved or not. The “Reboot required” column indicates whether or not it is necessary to restart the system to apply any changes made to the relevant lock. Number Name
Possible values
Moveable
Reboot required
001
Group Telephony
“Open” lock
—
—
002
Phoneb nebook users
0/1 0/10/20/.../ ../9999 (15 (15000 as Yes of R8.0)
No
00 3
–
Not used
—
004
Hotel guest sets
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
According to conditions, see: § Note 1
005 005
Mult Mu ltil ilin ingu gual al voic voice e prompts
0 /1
No
No
006
Hotel: AHL on V24
0/1 (= lock 126)
No
Yes
00 7
–
Not used
—
—
00 8
–
Not used
—
—
009
PSTN B channel
“Open” lock
—
—
01 0
Voice guide
0 /1
No
No
01 1
–
Not used
—
—
01 2
DISA
0 /1
No
No
013
E-CS engine
0/ 50/ 80/ 150/ 250/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (099999 as of R8.0) = 9999 (099999 as of R8.0) if lock 213 different from 0
Yes
014 014
Inte Integr grat ated ed me mete teri ring ng report
0 /1
No
No
01 5
–
Not used
—
—
01 6
–
Not used
—
—
—
6-1
Chapter
6-2
6
Number Name
Possible values
Moveable
Reboot required
01 7
–
Not used
—
—
01 8
–
Not used
—
—
019 019
Corp Co rpor orat ate e netw networ orki king ng
0/ 50/ 50/ 80/ 80/ 150/ 150/ 350/ 350/ 500/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) > or = lock 213 if different from 0
No
020 020
Auto Automa mate ted d atte attend ndan antt
0/ 6/ 9999 9999 (099 (09999 999 9 as of R8.0)
No
No
021
N0 of VPS ports
0/ 2/ 4/.../ 240
No
No
02 2
–
Not used
—
—
02 3
–
Not used
—
—
02 4
–
Not used
—
—
02 5
–
Not used
—
—
02 6
–
Not used
—
—
02 7
–
Not used
—
—
02 8
–
Not used
—
—
029
DECT/PWT Engine
0/1
No
Yes
03 0
–
Not used
—
—
03 1
–
Not used
—
—
03 2
–
Not used
—
—
03 3
–
Not used
—
—
03 4
–
Not used
—
—
03 5
Free
“Open” lock
—
—
03 6
Free
“Open” lock
—
—
03 7
Free
“Open” lock
—
—
038
Infocenter link
0/1
No
According to conditions, see: § Note 1
039
Performance
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
040 040
Real eal Time Time Inci Incide dent nts s
0/ 50/ 50/ 80/ 80/ 150/ 150/ 350/ 350/ 500/ 500/ 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (= lock 047)
No
No
Number Name
Possible values
041
DECT register
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (099999 as of R8.0) (= lock 050)
No
042
Accounting users
0/ 50/ 80/ 150/ 2350/ 50/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
04 3
–
Not used
—
—
044
4059 SBC
0/ 1/ 2/.../ 50
No
According to conditions, see: § Note 2
045
4059 BLF
0/ 1/ 2/.../ 30
No
According to conditions, see: § Note 2
046
Fax server ABC-A link
0/ 1/ 2/.../ 28
No
According to conditions, see: § Note 3
047
Alarms
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
04 8
–
Not used
—
—
049
Directory
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
050
Configuration
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
Yes
051 051
Real eal Time Time Me Mete teri ring ng on V24
0/ 50/ 80/ 150/ 350/ 500/ 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (= lock 042)
No
No
052
4635: Basic package
0 = n o ne 1 = 4635J 2 = 4635H
No
According to conditions, see: § Note 3
05 3
–
Not used
—
-
Moveable
Reboot required
6-3
Chapter
6-4
6
Number Name
Possible values
Moveable
Reboot required
05 4
–
Not used
—
—
05 5
–
Not used
—
—
056 056
4635 4635:: Ne Netw twor orki king ng OctelNet
0/ 2/ 4/.../ 64 (= lock 057)
No
According to conditions, see: § Note 3
057
4635: Fax manager
0/ 2/ 4/.../ 64
No
According to conditions, see: § Note 3
058
4635: Call manage ager
0/ 2/ 4/.../ 64 (= lock 057)
No
According to conditions, see: § Note 3
059 059
4635 4635:: Ho Hote tell ma mana nage gerr
0/ 2/ 4/.. 4/.../ ./ 64 (= lock 057)
No
According to conditions, see: § Note 3
060
4635: No of ports
0/ 2/ 4/.../ 64
No
According to conditions, see: § Note 3
061
4635: No of hours
0/ 5/ 10/.../ 40
No
According to conditions, see: § Note 3
062
4635: No of languages
0/ 0 / 1/ 2/.../ 8
No
According to conditions, see: § Note 3
063 063
4635 4635:: Atte Attend ndan antt manager
0/ 2/ 4/.../ 64 (= lock 057)
No
According to conditions, see: § Note 3
06 4
–
Not used
—
—
065 065
4635 4635:: Re Reco cord rdiing manager
0/ 2/ 4/.../ 64 (= lock 057)
No
According to conditions, see: § Note 3
066 066
4635 4635:: Ne Netw twor orki king ng AMIS AMIS 0/ 2/ 4/.. 4/.../ ./ 64 (= lock 057)
No
According to conditions, see: § Note 3
06 7
–
Not used
—
—
06 8
–
Not used
—
—
06 9
–
Not used
—
—
07 0
–
Not used
—
—
07 1
–
Not used
—
—
07 2
–
Not used
—
—
07 3
–
Not used
—
—
07 4
–
Not used
—
—
Number Name
Possible values
Moveable
Reboot required
075 075
Netw etwork ork Hospi ospita tall (specific to France)
“Open” lock
—
—
076
CCD agents
0/ 5/ 10/.../ 2000
Yes
No
077
CCS mono-site
0/ 1/ 2/.../ 60
No
No
078
CRI call record interface 0/1
No
No
079
ISVPN
0/ 50/ 80/ 150/ 350/ 500/ 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (= lock 019)
No
No
080
VPN
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (= lock 019)
No
081
Meet me conference
0/ 1/ 2/.../ 30
No
No
082
No of DECT/PWT terminals
0/ 10/ 20/ ..../ 5000 (= lock 175)
No
No
083
Flow Metering on Ethernet
0/ 50/ 80/ 150/ 350/ 500/ 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (= lock 042)
No
According to conditions, see: § Note 4
084
4635 users
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
08 5
–
Not used
—
—
086 086
Auto Automa mati tic c dire direct ctor ory y pop pop 0/ 1/ 2/.../ 50 up
No
According to conditions, see: § Note 2
087
Beta test release
0 = Alcatel-Lucent No OmniPCX Enterprise CS version released 8 = Beta test OXE R5.0LX 9 = Beta test OXE R5.1 10 = Beta test OXE R6.0 11 = Beta test OXE R6.1 12 = Beta test OXE R6.11 13 = Beta test OXE R6.2
No
08 8
–
Not used
—
—
090 090
Mobi Mo bili lity ty:: Roami oaming ng DECT/PWT
0/ 10/ 20/ .../ 5000
Yes
No
6-5
Chapter
6-6
6
Number Name
Possible values
Moveable
Reboot required
091 091
Voic Voice e guid guide e reco record rdin ing g from Reflexes sets
0/ 1
No
No
09 2
–
Not used
—
—
093
4635J IDENTIFICATION
0/ 1
No
—
094
WMI Workforc orce management interface
0/ 1
No
No
09 5
–
Not used
—
—
09 6
–
Not used
—
—
097
VPS users
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (099999 as of R8.0) (> or = lock 213 if different from 0)
No
098 098
Acco Accoun unti ting ng for for loca locall calls
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
Yes
099 099
Accou ccount ntin ing g for for ABC ABC calls
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
Yes
100
CSTA profile
0 = None 2 = Call center
No
Yes
101 101
CSTA STA mo moni nito tori ring ng requests
0/ 5/ 10/.../ 9995/ 9999 No (099999 as of R8.0) the Maximum depends on OXE release.
Yes
102
CCS multi-site
0/ 1/ 2/.../ 60
No
No
103
Real Time Interface
0/ 1/ 2/.../ 60
No
No
10 4
–
Not used
—
—
105
Com omp pressed calls
0/ 1/ 2/.../ 9999 (09 (099999 as of R8.0)
No
No
106 106
Tran Transf sfix ix Acce Access ss X24/V36
“Open” lock
-
-
10 8
-
Not used
-
—
109
4635 : IP Octel Networking
0/ 2/ 4/.../ 64 (= lock 057)
No
According to conditions, see: § Note 3
Number Name
Possible values
Moveable
Reboot required
110 110
4635 4635 : Glob Global al me mess ssag age e 0/1 redundancy
No
According to conditions, see: § Note 3
111
Ubiquity
0/ 10/ 20/.../ 15000
No
No
112
CCS LIGHT
0 / 1 / 2 / ... / 60
No
No
113
CSTA pilots monitoring 0/ 1
No
Yes
114
TSAPI server
0/ 5/ 10/.../ 2000
No
Yes
115
CCA softphone
0/ 5/ 10/.../ 1000 No (< or = lock 076 if different from 0)
116 116
OTUC OTUC Loca Locall My Phon Phone e 5/ 10/ 10/ 20/. 20/... ..// 3000 3000 (= lock 129)
117
No
No
Yes
OTUC Loc Local 4980 Option
5/ 10/ 20/.../ 3000 No (< or = lock 129 if different from 0)
Yes
11 8
–
Not used
—
—
119 119
4980 4980 noma nomadi dic c logg logged ed
5/ 10/ 10/ 20/. 20/... ..// 600 600 (= lock 129 + lock 309)
No
Yes
12 0
–
Not used
—
—
121
CLIP on VPS
0/ 2/ 4/.../ 240 (= lock 021)
No
No
122
ACAPI via CMIP
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (099999 as of R8.0) (= lock 050)
No
123
CSTA IVR port orts monitored
0/ 5/ 10/.../ 5000
No
Yes
12 4
–
Not used
—
—
125
CCWeb Agents
0/ 5/ 10/.../ 1000 No (< or = lock 076 if different from 0)
No
12 6
Hotel AHL link Ho
0/ 1
No
Yes
127 127
Encr Encryp ypti tion on DE DECT CT/P /PWT WT 0/ 10/ 20/.../ 5000 users
Yes
No
128
4615 No. of Access
0/ 2/ 4
No
No
129
ECC My softphone (4980 Grp)
5/ 10/ 20/.../ 3000
No
Yes
130 130
CSTA:: Voic CSTA Voice e Re Reco cord rdin ing g 0 / 1/ 2 Type
No
Yes
131
Remote LIO
No
No
0/ 16/ 32/ 48/ .../ 16xN
6-7
Chapter
6-8
6
Number Name
Possible values
Moveable
Reboot required
132
IP-Trunk
0/ 9999 (099999 as of R8.0) (= lock 187)
No
No
133 133
Mast Ma ster ered ed conf confer eren ence ce
0/ 50/ 50/ 80/ 80/ 150/ 150/ 350/ 350/ 500/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
134
Multi-tenant
0/ 50/ 80/ 150/ 350/ 500/ 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) ( > or = lock 213 if different different from 0)
No
No
135
G729A Server
0/ 1/ 2/.../ 9999 (099999 as of R8.0)
No
No
136
Priority
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
137
Call restriction
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
138
IP Clients
0/ 10/ .../ 9999 (15000 as of R8.0) (= lock 176 + lock 317+ lock 330)
No
Yes
13 9
–
Not used
—
—
14 0
–
Not used
—
—
14 1
–
Not used
—
—
14 2
–
Not used
—
—
143
TAPI premium server
0/ 5/ 10/.../ 5000
No
Yes
14 4
–
Not used
—
—
145
CSTA Recording B Channel
0/ 5/ 10/.../ 600
No
Yes
146
PWT MOBILITY (UTAM)
0: non US market 1: US market (according (according to lock 029)
No
No
14 7
–
Not used
—
—
148
IP Call Server
“Open” lock
-
-
Number Name
Possible values
Moveable
Reboot required
14 9
–
Not used
—
—
15 0
–
Not used
—
—
151
4635 : VPIM
0/2/4/.../64 (= lock 057)
No
According to conditions, see: § Note 3
15 2
Radio link
0 /1
No
No
15 3
SNMP TRAP
0 /1
No
Yes
154
Additional S0 features
0/1
No
No
155 155
Addit dditio iona nall safet afety y features
0 /1
No
No
156
Interphony features
0/1
No
No
15 7
CCA nomadic
0 /1
No
No
158
CSTA By-pass
500/ 1000/ 1500/ .../ 9500/ No 9999 (099999 as of R8.0) the maximum depends on the OXE release. release.
Yes
15 9
–
Not used
—
—
160
CCemail Agents
0/5/10/.../1000
No
No
161
CCoutbound Agents
0/5/10/.../1000
No
No
162
CCoutpredial Agents
0/5/10/.../1000
No
No
16 3
–
Not used
—
—
164
CSTA Record networked
0/5/10/.../600
No
Yes
165 165
Alcat lcatel el-L -Luc ucen entt OmniPCX Enterprise CS release
30 = R5.0 LX 31 = R5.1 32 = R6.0 33 = R6.1 34 = R6.2
No
No
166
4980 mult ulti dev device
5/1 5/10/20/.../ ../3000 (= lock 129)
No
Yes
167
ACR data base read
0/ 1
No
No
168
No. of HPOV node
0/ 1/ 2/.../ 100
No
No
169 169
Voice oice dete detect ctio ion n channels
0/ 1/ 2/.../ 315
No
No
17 0
–
Not used
—
—
17 1
–
Not used
—
—
17 2
–
Not used
—
—
173
Business Users
0/ 10/ 20/.../ 5000
Yes
No
174
Analog Users
0/ 10/ 20/.../ 5000
Yes
No
6-9
Chapter
6-10
6
Number Name
Possible values
Moveable
Reboot required
175
Mobile Users
0/ 10/ 20/.../ 5000
Yes
No
176 176
Busin usines ess s IP User Users s
0/ 10/ 10/ 20/. 20/... ..// 5000 5000 (150 (15000 00 Yes as of R8.0)
No
177
SIP Users
0/ 10/ 20/.../ 1000
Yes
No
178
4645 : Voice mail engine
0/ 1/ 2/ 3
No
According to conditions, see: § Note 2
179
4645 users
0/ 50/ 80/ 150/ 350/ 500/ 1000 (15000 as of R8.0)
Yes
According to conditions, see: § Note 3
18 0
–
Not used
—
—
181 181
Alcat lcatel el-L -Luc ucen entt OmniPCX Enterprise CS
1 = Alcatel-Lucent OmniPCX Enterprise CS
No
No
182
4645 : networking
0/ 1
No
According to conditions, see: § Note 3
183 183
4645 4645 : addi additi tion onal al language
0/ 1/ 2/.../ 7
No
According to conditions, see: § Note 3
184
Integrated Gatekeeper
0/ 1
No
Yes
18 5
SIP Gateway
0/ 1
No
Yes
186
EE-CS redundancy
0/ 1
No
Yes
187 187
H.32 H.323 3 (G71 (G711) 1) netw networ ork k link
0/ 1/ 2/.../ 1000
No
According to conditions, see: § Note 5
188
SIP networking links
0/ 1/ 2/.../ 1000
No
According to conditions, see: § Note 5
189
CCTI agents
0/ 5/ 10/.../ 1000
No
No
190
RSI call center agents
0/ 5/ 10/.../ 2000
No
Yes
19 1
Campus DECT
0/ 1
No
No
192
T2 D_REX protocol
0/ 1
No
No
193
Embedded voice guides 0/ 1
No
Yes
194 194
4645 4645 My Me Mess ssag agin ing g users
0/ 10/ 20/.../ 1000
No
According to conditions, see: § Note 3
195
CCD profil
0 = None 1 = Starter 2 = Server (according (according to lock 076)
No
Yes
196
RSI Business agents
0/ 5/ 10/.../ 1000
No
Yes
Number Name
Possible values
Moveable
Reboot required
197
G729A Client
0/ 10/ 20/.../ 4000
Yes
No
19 8
—
Not Used
—
—
199
Version 4400–R5.0 Ux
0/ 1
No
No
200
4400 Mobiles migration 0/ 1/ 2/... /5000
No
No
201
4400 Reflexes migration
0/ 1/ 2/... / 5000
No
No
202
4400 Analogs migration 0/ 1/ 2/... / 5000
No
No
203 203
Upgra pgrade de CC CCS S ligt ligth h to CCS monosite
0/ 1/ 2/ .../ 60 < or = lock lock 112
NO
No
204 212
-
Not used
—
-
213 213
E–CS E–CS engi engine ne phys physic ical al users
0 / 50 / 80 / 150 / 350 / No 500 / 1000 / 1500 / ... / 9500 / 9999 (099999 as of R8.0)
No-
214 299
-
Not used
—
-
30 0
swk file edition
0
No
No
30 1
hard key 1
0
No
No
30 2
hard key 2
0
No
No
30 3
ACK 1
0
No
No
30 4
ACK 2
0
No
No
30 5
ACK 3
0
No
No
30 6
ACK 4
0
No
No
30 7
ACK 5
0
No
No
308 308
Rem emot ote e exte extens nsio ion n (GSM interworking)
0/ 5/ 10/ 15/ 20/.../ 5000
No
No
309
XML telephony
0/ 10/ 20/.../ 3000
No
Yes
310
CLIP Z
0/ 10/ 20/.../ 5000
Yes
No
311
ACR networking
0/ 1
No
No
312
Scripting agents
0/ 5/ 10/.../ 1000
No
No
313
ECC platform
0/1/ 2/ 3
No
No
314 314
4635 4635 : My Me Mess ssag agin ing g users
0/ 10/ 20/.../ 5000
No
According to conditions, see: § Note 3
315
Hard 0223 Key migration
0/ 1
No
Yes
316 316
Stand tandar ard d Re Refl flex exes es Users (with services restriction)
0/ 10/ 20/30.../ 5000
Yes
No
6-11
Chapter
6
Number Name
6-12
Possible values
Moveable
Reboot required
317 317
Stan Standa dard rd IP User Users s (wit (with h 0/ 10/ 20/.../ 5000 (15000 services restriction) as of R8.0)
Yes
According to conditions, see: § Note 5
318
Max number of connections to applications server (PRS)
0/ 1/ 2/...
No
No
319
EasyContact
0 = None 1 = EasyContact
No
No
32 0
–
Not used
—
—
321
Mobile IP-Touch
0/ 10/ 20/ .../ 100 (OXE R6.1) 0/ 10/ 20/ .../ 500 (OXE R6.2)
No
No
322 322
CSTA STA Beyon eyond d 9999 9999 instances (099999 instances instances as of R8.0)
0 /1
No
No
323
Executive Users
0/ 10/ 20/ .../ 5000
No
No
324 324
Execu xecuti tive ve IP User Users s
0/ 10/ 10/ 20/ 20/ .../ .../ 5000 5000 (150 (15000 00 No as of R8.0)
No
325 325
IP-T IP-Tou ouch ch Secu Securi rity ty Engine
0/ 1
No
No
326 326
Secur ecured ed IP-T IP-Tou ouch ch Phones
0/ 10/ 20/ .../ 5000
Yes
No
327
IP-Touch Security MCM 0/ 1/ 2/ .../ 120
Yes
No
328
IP-SoftPhone Attendant 0/ 1/ 2/ .../ 50
Yes
No
329
IP-SoftPhone Agent
0/ 10/ 20/ .../ 5000
Yes
No
330 330
Advan dvanc ced Mo Mobi bile le IP-Touch
0/ 1/ 2 .../ 5000 (15000 as Yes of R8.0)
No
332
PCS Max Numbers
1/2/ …/240
Yes
No
33 3
–
Not Used
—
—
334
CSTA Maximum Number of IP Recordings
0/5/10/15 ...
No
No
335 335
Num umbe berr of Gree Greeti ting ng Assistant
0/ 1/ 2/ 3
Yes
Yes
336 336
Numb Nu mber er of stat statio ions ns with with 0/ 1/ 2/ 3/ 4../ 15000 IME
No
No
337
SIP External Voice Mail 0/ 1
Yes
No
338 463
–
Not used
—
—
46 4
–
Not used
—
—
6.1.1
Number Name
Possible values
Moveable
Reboot required
46 5
–
Not used
—
—
46 6
–
Not used
—
—
467
ARS
0/ 50/ 80/ 150/ 350/ 500/ No 1000/ 1500/ .../ 9500/ 9999 (15000 as of R8.0) (> or = lock 213 if different from 0)
No
46 8
–
Not used
—
—
469
G723.1 Server
0/n
No
No
470 866
Reserved
“Open” lock
—
—
Note 1 The Hotel option is validated if the value of one of the following locks is different from 0: -
Lock Lock 004 004:: Ho Hote tell Gues Guestt set set
-
Lock Lock 038 038:: Info Infocen cente terr link link
When new OPS files (containing these locks) are installed and these files validate the Hotel option, a reboot is required. When the Hotel option has already been validated, a reboot is not required when new OPS files increase these locks.
6.1.2
Note 2 The ABCA option is validated if the value of one of the following locks is different from 0: -
Lock Lock 044: 044: 4059 4059 SBC SBC
-
Lock Lock 045: 045: 4059 4059 BLF BLF
-
Lock 086: Automa Automatic tic direct directory ory pop up
-
Lock 178: 464 4645 5 Voice Voice mail mail engine engine
The ABCA option option is also also vali valida date ted d if the the valu value e of one one of the the foll follow owin ing g param paramet eters ers of the the hardware.mao hardware.mao file is different different from 0: -
Nb of BLF
-
SBC
-
4635x
-
46 3 0
-
48 5 5
When new OPS files (containing these locks) are installed and these files validate the ABCA option, a reboot is required. When the ABCA option has already been validated, a reboot is not required when new OPS
6-13
Chapter
6
files increase these locks.
6.1.3
Note 3 Locks 46, 52, 56, 57, 58, 59, 60, 61, 62, 63, 65, 66, 107, 108, 109, 110, 151, 179, 182, 183, 194, 314: These parameters can be increased without reboot, provided the ABCA option is enabled.
6.1.4
Note 4 Lock 83: this parameter can be increased increased without reboot only when accounting accounting is started. started.
6.1.5
Note 5 Lock 187, 188, 317: These parameters can be increased without reboot provided compression was used before the new SWK file installation. installation.
6-14
