MAKE YOUR TEMPLATE INTO ISO DRAFT In this guides, help you import your drawing into iso draft instead of using the default template PDMS. For example:
MY TEMPLATE
I suppose PDMS installed into driver D:\aveva. STEP 1: The drawing is a block and you have to explode it. Using autocad , import your drawing and type command: explode. Choose your drawing to explode it STEP 2: Limit your drawing. In auto cad, cad, type command: limits . Choose Choose area your drawing. This step is so important. If you don’t limit your area, PDMS will give you blank drawing.
STEP 3: Save your your drawing as file name *.dxf . Save your file into directory D:\AVEVA\Plant\PDMS12.0.SP4\Plot
[email protected]
STEP 4: Type Window+ R, Type CMD
Change this patch typing the follow command
STEP 5: The purpose of this step is convert file dxf to plt. Typing the command: PLOT PDMS *.dxf *.plt (*: name file)
Before convert:
[email protected]
After convert:
This is your project
NOTE: some times while covert, error occurs because missing 2 file *.dll . Copy 2 file *.dll into directory STEP 6: Copy file *.plt into directory your project.
STEP 7: Logon PDMS module ISO DRAFT Choose options modify filename
In options file choose yourfile
[email protected]
[email protected]
STEP 8: In File template sheet layout choose *.plt ( *: your file)
Click ok It’s done. Good luck 2 U
[email protected]
