Subject:
Alcatel-Lucent KPI Optimization Test Plan for LTE
Date:
April 22, 2010
Version 1.0
ABSTRACT
This This docume document nt provid provides es a detail detailed ed test test plan plan for KPI Optimi Optimizat zation ion of the LTE field field technology deployment as detailed in the Verizon High Level Test Plan. The tests ill !e e"ec e"ecut uted ed in #ost #oston on$$ %& and and surr surrou ound ndin ing g area areas. s. The The prim primar aryy o!'e o!'ect ctiv ivee of the the Optimization is to validate !asic KPI functionality$ evaluate performance of LTE &ir( Interface functionalities. The scope of test cases included in this KPI Test Plan spans several areas including access$ latency$ coverage and )apacity
Alcatel-Lucent – Proprietary Alcatel-Lucent - Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright © 2006 Alcatel-Lucent Technologies Unpublished and Not for Publication All rights reserved
e!ision "istory #ersion 1.0 1.0
$escription Init nitial ver version sion of test est plan plan that hat wil will be exec execut uted ed for KPI Optii!ation
$ate 0"#$$#10
Ta%le 1& e!ision "istory
eferences %1& LTE %1& LTE KPI Optimization High Level Test Plan$ 'ersion 1( )pril $$ $010( 'eri!on *ireless
Alcatel-Lucent– Proprietary See notice on first pa+e
$
'lossary of Terms
D,,S /) e P2 3b / ,,D4 ,4 44/ 4P,S 4S 5PO O) 4 O, S 4 6)4S 6)4S/S /S 667 SAE TLS
',)5
Down-,in ,oad Siulator /nhanced )nalsis ool /nhanced Pacet 2ore 3i+abit /thernet ,3/ ,o++in+ and Dia+nostic 4odule ,ocal 4aintenance ool 4obilit 4ana+eent /ntit 4ulti Protocol ,abel Switchin+ 4ana+eent Server 5etwor Perforance Optii!ation Operation( )dinistration and 4ana+eent Open ,oop Spatial 4ultiplexin+ 6ole 6ole-b -bas ased ed )cce )ccess ss 4ana 4ana+e +ee ent nt Secu Securi rit t Sst Sste e 6eote 6adio 7ead Sste )rchitecture /volution ransparent ,)5 Service 'irtual ,)5
Alcatel-Lucent– Proprietary See notice on first pa+e
8
Ta%le of (ontents A)*TA(T++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++1 E#I*IO "I*TO++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2 E.EE(E*+++++ E.EE(E*+++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ ++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++2 +++++++++++++++++++++++++++++++++2 1
ITO$/(TIO+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 KPI OPTIIATIO TA'ET++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 $EPLOET **TE ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++4 5 PO(E** O#E#IE6+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++1
Alcatel-Lucent– Proprietary See notice on first pa+e
"
List of Ta%les TA)LE 1& E#I*IO "I*TO++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2
List of .i7ures .I'/E 1& LTE $EPLOET ET6OK A("ITE(T/E++++++++++++++++++++++++++++++++++++++++++++++++++++++++8 .I'/E 2& EAT (O.I'/ATIO I LTE TIAL+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++13 .I'/E 3& *(OTE*T A("ITE(T/E+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++15 .I'/E 5& E$AT LTE TIAL (O.I'/ATIO++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++19
Alcatel-Lucent– Proprietary See notice on first pa+e
9
1
Intro:uction
2
KPI OPTIIATIO TA'ET
(ate7ory
*u%-(ate7ory
PerformanceAccessi%ility
( *etup .ailure ate Attac< .ailure ate Attac< $elay *er!ice e=uest .ailure ate
Performanceetaina%ility
PerformanceInte7rity
*cope ( L L (
*er!ice e=uest $elay $e:icate: )earer Acti!ation .ailure ate
L
$e:icate: )earer Acti!ation $elay $e:icate: )earer $rop ate
(onte>t $rop ( $rop Access A(" Latency
Tar7et #alue
0+40; 2+90; 2 secon:s
2+90; 0+9 secon: 1+90; 0+9 secon:s 1+20; 1+20; 1+20;
( L
0+9 secon:s $L?/L P
L
0?20 %ps $L?/L L( T
L
99?18 %ps $L?/L P
(
$L?/L P
L( A?"A etransmission ate
Pac@et Latency Broun:-trip :elayC
L
Alcatel-Lucent– Proprietary See notice on first pa+e
4?3 %ps 1?0+9 %ps 1; 30 msec
Performanceo%ility
*1?D2 "an:o!er .ailure ate
( 1+20;
.-*I
.-*P
3
*1?D2 "an:o!er Interruption Time, intra-e)
L
*1?D2 "an:o!er Interruption Time, inter-e)
L
Intra?Inter-E TA/ .ailure ate Pa7in7 Performance IAT
100 msec 100 msec 2; 9;
10; 0; 0;
$EPLOET **TE
3+1
Trial *ystem Arc
his section provides a hi+h level description of the ,/ sste architecture and a description of all involved entities and interfaces between entities. )s shown in ;i+ure 1( the ,/ architecture networ is coposed of: • • • •
4ultiple e5ode
)s shown in the fi+ure( the cluster of e5ode and three 6D>s. /ach D$> will consist of a u224s ?controller with interface to bachaul@ and three e2/4s ?odesA one for each sector@. /ach e2/4 will be connected via fiber optic cable to the 6D>.
Alcatel-Lucent– Proprietary See notice on first pa+e
=
.i7ure 1& LTE $eployment etHor@ Arc
Alcatel-Lucent– Proprietary See notice on first pa+e
B
he inforation below details the hardware description and the associated O)4 eCuipent list for the rial networ: •
•
•
•
•
•
•
eo:e) D$> '$ ?1 u224 8 e2/4@ o o 6D> ?reote-radio-heads coprisin+ of aplifiers and filters@( "0* x power )ac@
In order to ana+e the e5ode
2onfi+uration ana+eent ;ault ana+eent Perforance ana+eent races
)dditional O)4 sstes include: •
•
•
•
• • • •
•
,4 to confi+ure and set up the D$> platfor to coission IP addresses( D,2P server( and default +atewa. he ,4 connects locall to console port ,4 to confi+ure the eP2 coplex ?44/( S-3* and PD5 3*@ ?connects locall to console port@ 4ana+eent Server ?4S@ to confi+ure the e5< and displa e5< status and fault inforation 5etwor Perforance Optii!ation ?5PO@ to collect perforance counts and easureents. he 4S and the 5PO are to+ether referred to as the ,/ 4ana+eent Sste Server 4S and 5PO clients to interface to 4S and 5PO servers 5etscreen firewall to protect the ,/ networ eleents fro intrusion 5etscreen 3ate firewall to filter access to the 6)4S/S 4ediation sste 6)4S/S 6eote )ccess and 6)4S/S 4ediation P2 to provide access control and authentication on reote access to the ,/ networ eleents 9$0 S#* product ana+in+ the onitorin+ aspects on ==90
Alcatel-Lucent– Proprietary See notice on first pa+e
F
3+2
Air Interface O!er!ieH
4ain inputs to setup ,/ air interface durin+ the Optii!ation are: • • • • • •
3+3
10 47! spectru bandwidth in the >pper s per e5< site S;<2#4I4O in D, and SI4O in >, 2ross pole and 'ertical pole antennas Access terminals
,3/ 3 Series >/s will be used durin+ the Optii!ation
3+5
LTE eo:e) functions
he e5ode< hosts the followin+ functions: •
• • •
•
3+9
;unctions for 6adio 6esource 4ana+eent: 6adio /s in both >plin and Downlin ?schedulin+@ 6outin+ of user plane data towards S)/ +atewa Schedulin+ and transission of pa+in+ essa+es ?ori+inated fro the 44/@ Schedulin+ and transission of broadcast inforation ?ori+inated fro the 44/ or O)4@. 4easureent and easureent reportin+ confi+uration for obilit and schedulin+ functions
AL/ 4490 *er!ice outer .unctions
he S6==90 is an ed+e router that will host the followin+ functions: • • • •
3+
,in a++re+ation DS2P appin+ ',)5 and ,)5 switchin+ IP router to reach different )pplication servers AL/ 4409 *er!ice A77re7ation outer .unctions
he ),> ==09 is a Service )++re+ation 6outer ?S)6@ that offers: • •
3+4
) service-oriented capabilit to the 6)5 IP#4P,S 6)5 transport solution
LTE E .unctions
he 44/ hosts the followin+ functions: •
Idle ode obilit Alcatel-Lucent– Proprietary See notice on first pa+e
10
S1 connection establishent Idle to active ode transition o )ctive to idle ode transition o Session ana+eent HoS control o S1 handlin+ durin+ 7O o
•
•
3+8
LTE *AE .unctions
he S)/ 3atewa hosts the followin+ functions: • • • •
3+
4ultiple bearer support ?one default and one dedicated@ S1 3P-> bearer endpoint Idle ode handlin+: bearer suspension with pa+in+ reCuest S1 path switch durin+ handover $ata Laptop (onfi7uration
he access terinal will interface with a data laptop to support Pin+s( ;P( >DP( and 7P data transfers. he laptop should be confi+ured per the recoended paraeters to optii!e perforance and provide an appropriate coparison to existin+ data. hese recoendations include: • • • • •
*indows $000 Professional or *indows EP edition IP header copression ?' copression@ turned O;; PPP software copression O;; except for 7P data transfer 1$BKbtes 2P window si!e 4> of 1900 btes
3+10 Application *er!ers
)pplication servers will be used durin+ the rial to provide the data content for the various tests. hese servers will be provided b )lcatel-,ucent and the need to be easil accessible and not bloced or restricted b low bandwidth pipes. *indows $000 Server /dition will be used as a data server( which should reside as close to the PD5 +atewa as possible. his will eliinate perforance uncertaint due to an external networ dela. Data applications available throu+h this server will be: • • •
>DP DOS ;P - 2P#IP Pin+
3+11 Test tools
In order to validate functionalit and Cuantif perforance( a variet of test tools will be used. raffic 3eneration ools:
Alcatel-Lucent– Proprietary See notice on first pa+e
11
DOS-;P( *I5DS( Pin+ G o +enerate 2P#IP and >DP based traffic data for easurin+ data capacit and networ latenc Pin+ scripts for access tests • ,o++in+ tools •
)+ilent is a Dia+nostic 4onitor for lo++in+ and anal!in+ over-the-air 5etwor sste perforance and paraeters /nhanced )nalsis ool ?/)@: to collect internal traces +enerated b the e5< • )nalsis tools •
• • •
)+ilent Protocol anal!er KPI collector and +enerator Pacet Data 4onitorin+ ?PD4@ tool: a distributed data perforance( analsis and troubleshootin+ service
3+11+1 P$ Tool
PD4 is a distributed data perforance analsis and troubleshootin+ service for pacet data( providin+ end-to-end and per-lin data Cualit analsis. It can be used for the followin+ functions: • • •
•
•
• •
'endor independent Pacet data networ onitorin+ capabilities 2onsistent and autoated testin+ and analsis of pace t networs 2haracteri!ation of end-user perceived perforance in ters of throu+hput( latenc( dropped pacets( etc. )bilit to onitor # test pacet networ to support tie sensitive applications( such as 'oIP Identification of lins#coponents reCuirin+ aintenance and optii!ation( and onitorin+ of lin and end-to-end perforance /nables precise data correlation across the entire networ 6educes resource reCuireents with an autoated and reote controlled sniffer sste
3+11+2 En
he /) stores internal traces of up to 19 e5odeDP.
Alcatel-Lucent– Proprietary See notice on first pa+e
1$
CLIENTS EAT EAT serer
hub
OAM
Eng Eng’’rules rulesfor forEAT: EAT:
Traces Tracesare aretransorte! transorte!"ns"!e "ns"!e #$% a&loa!s #$% a&loa!s––trace tracetransort transort #$%'I%'Et( #$%'I%'Et()stan!ar! )stan!ar!Et(ernet Et(ernet fra*es+ fra*es+ Trace Tracecontent contentoff"c"all& off"c"all&release! release! )5,)5,-Mbs+ Mbs+b& b&S&ste* S&ste*!es"gn !es"gn tea*, tea*, Traces Tracesfor.ar!e! for.ar!e!"ns"!e "ns"!e/LAN /LAN OAM OAMan! an!route! route!t(anks t(anksto toLAN LAN s."tc( s."tc(to toEAT EATserer serer)!est )!estI%I%11 use!+ use!+ Internal InternaleNB eNBtraces tracesact"ate! act"ate!b& b& !efault – L"*"te! e2ort to !efault – L"*"te! e2ort to outs"!e outs"!e)u )uto toEAT EATserer+ serer+TBC TBC Traces co*"ng fro* Traces co*"ng fro*stan!ar! stan!ar! Et(ernet Et(ernetort ortof oft(e t(eeNB, eNB,$ebug $ebug ort not use!, ort not use!,
LTE RAN
Backbone Backbone
7750
LTE CORE
To get EAT traces at eNB site: a local access point to OAM VLAN required either from an existing connection point or from an external hubs!itch to come !ith on eNB site
.i7ure 2& EAT confi7uration in LTE Trial
3+11+3 A7ilent tool he )+ilent D5) is a protocol anal!er and can be used for user-plane analsis. It offers a scaleable( distributed probin+ architecture and the raw data is collected at the S1 level. Owin+ to the true client-server architecture( each user client is able to test independentl. o enable detailed protocol analsis( 7ardware Intelli+ent Pacet Processin+ ?7I-PI$@ at line rate will be reCuired. )t the user-plane( the analsis will also reCuire a separation of the si+nallin+ and paload pacets to be able to correlate and anal!e events at both levels. 3+11+5 6ires
*ireshar is a networ protocol anal!er. *ireshar offers the capabilities to capture networ data eleents and provide soe etrics on the data snoopin+.
3+11+9 *yncroTest Sncroest is an autoated test tool to control test obiles ?called JProbes@ reotel usin+ a central J4aster 2ontroller console. ?See ;i+ure 8: Sncroest )rchitecture below@ Sncroest probes control the functionalit of ,,D4#)+ilent( *I5DS and ;P to +enerate traffic and onitor the connections fro the probeLs point-of-view. he lo+ data is then sent bac to the aster control for analsis. Probes have also been developed to support reote control of /) so that testin+ and data collection can be snchroni!ed. ) sin+le Sncroest aster controller can control at least B )+ilent#,,D4#*I5DS probes and an /) probe siultaneousl eliinatin+ the need for an 6; en+ineer in each drive test vehicle. Sncroest uses self healin+ 2P connections with each probe to direct the probe and it receives periodic heartbeats fro the probe to update the probes status. Alcatel-Lucent– Proprietary See notice on first pa+e
18
.i7ure 3& *yncroTest Arc
3+11+ $ata Analysis Tool Be$ATC eDAT is a post-processing tool that allows a user to analyze RF performance KPIs. eDAT takes input from oth !" logs an# e$o#e% logs. eDAT pro&i#es a stan#ar#ize# approach to analyze metrics in the Ra#io Access $etwork. eDAT uses the !" 'ogs generate# y Agilent(''D) as input from the !" perspecti&e. The e$o#e% logs are generate# y "AT an# pro&i#e an a##itional input to eDAT to analyze KPIs from the e$o#e% perspecti&e. The following #iagram illustrates the eDAT configuration for the 'T" Deployment.
Alcatel-Lucent– Proprietary See notice on first pa+e
1"
UE logs
EAT
'DAT
eNodeB logs
'*"-''D)
LTE UE
eNodeB KPIs
Messages Events KPIs KPIs KPIs
.i7ure 5& e$AT LTE Trial (onfi7uration
Once the data has been collected( eD) post-processes the >/ and e5ode< lo+ files to +enerate the analses of the KPIs. eD) is a standalone tool that does not need to be connected to the fixed infrastructure. he output includes aps( +raphs( plots( reports and essa+e decodin+. )ll these can be used to evaluate the 6; perforance of the ,/ rial networ. eD) aes use of event tiestaps and locations of the >/s to +eo+raphicall plot out the data+
Alcatel-Lucent– Proprietary See notice on first pa+e
19
5
Process O!er!ieH
5+1
$eployment *ite Locations
maps
5+2
*ite ea:iness
he Site 6eadiness are health checs that ensure all cells are operatin+ as reCuired. hese procedures are usuall perfored after deploin+ a new networ or when introducin+ new cell sites reCuired for a professional service. Once these health checs have been perfored and it a satisfactor perforance of all cells can be +uaranteed( these health checs are no lon+er a prereCuisite of the 6; Optii!ation. 5+2+1
*pectrum (learance #erification
he spectru clearance assures that no external interference is present and sufficient +uard bands are obeed. he detection of the interferences can be a ver tie consuin+ and difficult tas once the ,/ sste is up and runnin+. It is desirable to have a ver hi+h de+ree of confidence that the spectru is cleared prior to an testin+. 5+2+2
Antenna Au:it
his phase involves a series of Cualit chec s to ensure proper installation of the antenna sste. he nuber of audited cell sites will depend on the custoer contract. here is a recoended audit iniu of $9M of cell sites in a cluster. he selection of cell sites ust be done with input fro the custoer. If ore than 90M of the audited antennas uncover installation errors( the reainin+ antennas in the cluster ust also be audited.
*ector #erification
he sector tests include verification of basic call processin+ functions includin+ ori+ination( terination and handover tests. 4easureents are ade on ,/ si+nal levels to verif that each sector is transittin+ with the appropriate power levels and the 2ell id. hese basic functions tests are intended to detect hardware -( software-( confi+uration G and paraeter errors for each cell site in the cluster prior to further drive testin+. Sector drives should be executed for each sector in the sste or accordin+ to contractual obli+ations. Due to the siple nature of the drives( sector drives do not reCuire custoer approval. 5+2+5
)aseline E>istin7 *ystem
he objective for the
1
Drive routes and Ke Perforance Indicators will be the sae as the ones used later for Sste 'erification. It is iportant to eep the drive routes and KPILs identical for perforance validation and coparison purposes. Drive routes and KPILs ust be a+reed upon with the custoer. 5+3
. Optimization Plannin7
he Optii!ation plannin+ phase ensures sste and tool readiness for 6; Optii!ation before be+innin+ the actual drive testin+. 5+3+1
Perform . Parameter Au:it
6; paraeters ust be inspected for consistenc with the ,/ paraeter catalo+ue. he 6; paraeter settin+s used in the networ can be obtained fro the 5DP project database. hese settin+s are then audited usin+ the ,/ paraeter catalo+ue *PS 5+3+2
#ali:ate Initial ei7<%or Lists
)n iportant step within the 6; Optii!ation preparation phase is associated with the nei+hbor list verification. he coplete nei+hbor lists in the ,/ networ are reCuired to copare the nei+hbor relations with networ desi+n plots. 5ei+hbor relations need to be verified for recent updates( validit and appropriateness. he recoended strate+ is to have a iniu nuber of nei+hbor relations in the nei+hbor lists. he nei+hbor lists used in the networ can also be obtained fro the *PS project database. 5+3+3
Tool ea:iness
)ppropriate drive test tools and post-processin+ tools( need to be prepared for optii!ation. 5+3+5
$efine (lusters
)pproxiatel 19-1F e5ode
$ri!e oute Plannin7
Drive routes need to be defined for Sector 'erification( 2luster Optii!ation and Sste 'erification. 2overa+e prediction plots( orpholo+ and clusters can define all drive test routes. he drive route should aintain a distance eCual to N of the cell site radius for sector verification. he routes for 2luster Optii!ation shall consist of ajor roads( hi+hwas and hotspots. otal tie to drive all routes in atpical cluster should be approxiatel to B hours. )dditional border route is chosen b the wa it crosses the cluster borders witout +oin+ into the cluster areas. he Sste 'erification drive route are used to collect the etrics for the /xit 2riteria. he routes are a cobination of individual clusters.
Alcatel-Lucent– Proprietary See notice on first pa+e
1=
5+5
. Optimization E>ecution
he 6; Optii!ation /xecution consists of drive tests( proble area identification( verification drives( and final drives to ensure copletion of /xit 2riteria. he core activit is to provide sste tunin+( as well as data collection and reportin+. ,/ networ optii!ation would be perfored under loaded networ conditions. 5+5+1
(luster Optimization
he 2luster Optii!ation consists of three phrases: >nloaded 2luster Optii!ation • ,oaded 2luster Optii!ation • 2luster Perforance 'erification • Durin+ the first 2luster Optii!ation phase( a easureent drive is perfored under unloaded networ conditions usin+ the optii!ation route. Once the data fro the first phase are collected( proble spots are identified and optii!ed. he unloaded drive test identifies covera+e holes( handover re+ions an d ultiple pilot covera+e areas. It also spots eventual overshootin+ sites ?as interferences is inial@ fro areas belon+in+ to nei+hbor clusters. he first pass i+ht lead to correction of nei+hbor lists and adjustents of the fundaental 6; paraeters such as transit powers and#or antenna a!iuths and antenna tilts. he drive test inforation hi+hli+hts fundaental flaws in the 6; desi+n under best-case conditions he second 2luster Optii!ation phase is perfored under loaded conditions. he drive routes for the loaded 2luster Optii!ation will be exactl the sae routes as those used for the unloaded easureents drives. ,oadin+ the cell will cause an increase of ne+ative S56 valuses( identif potential covera+e holes( result in hi+her <,/6( result in lower obilit throu+hput( and ore dropped calls. he objective is to fix the probles observed b the field teas. his involves the fine-tunin+ of 6; paraeters such as the transit power or handover paraeters. )ntenna re-adjustents ?e.+. down-tilts( a!iuths( patterns#tpes or hei+hts@ are also occasional perfored. he 2luster perforance is easured a+ainst the cluster /xit 2riteria. he exit driveLs purpose is to verif and to confir specific /xit 2riteria deanded b the custoer. he final statistics fro the cluster exit drive are presented to the custoer for approval. hese statistics contain plots as well as data in tabular for. 5+5+2
*ystem #erification
Sste 'erification is the final phase of the 6; Drive est
Alcatel-Lucent– Proprietary See notice on first pa+e
1B
5+9
Test (ases
he default test ode in the D, will be the open loop spatial ultiplexin+ ?O,S4@ and for the >, it will be SI4O. D,,S ?down-lin load siulator@ will be used to +enerate interference on the D, of the nei+hborin+ cells for loadin+ purposes.
5+
*in7le /ser T
5++1
*in7le /ser $oHnlin@ Airlin@ T
Test O%ecti!es& est 'alidate the perforance b conductin+ sin+le-user stationar and liited obilit tests on pre-selected locations in an ebedded sector and in a liited drive route within the sae sector( respectivel. he tests shall be perfored usin+ both >DP applications for perforance coparison( and under 90M cell loadin+ conditions.
Test $escription& ests will be executed in 2lose-,oop Spatial 4ultiplexin+ ?2,S4@.
;or the stationar tests( the test >/ will be located at selected locations in an ebedded sector correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@. See for S56 ran+es. ;or the obilit tests( the test >/ will be driven accordin+ to the predefined drive route. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ will be +enerated b occupin+ portions of the 6esource p:
) drive test van will be used with rooftop ounted antennas 1. $. 8. ". 9.
/nsure that 9004< file is available at the servers for downloads /nsure that x#6x )ntenna 2orrection is below $0M /nsure that >/ is reportin+ 6an of $ /nsure that antenna on the est van are cross polari!ed /nsure that 2P *indow si!e of client laptop is set to 91$btes
Alcatel-Lucent– Proprietary See notice on first pa+e
1F
Proce:ure& Action
esponse
1
Par test 'an at predeterined location on 52 route.
$
Open )+ilent and connect >/ to the )+ilent tool.
8
Power the >/ and ensure that the ri+ht port is assi+ned to the >/. 2hec that 3PS is worin+ on )+ilent and *inds Open ,3/ ,/ 24 and clic on J2onnect
" 9 = B F 10 11
Pin+ the )pplication Server to ae sure >/ has acCuired an IP address Open *inds >DP and confi+ure the ri+ht adapter. Populate the fields with ri+ht values Start lo++in+ )+ilent and clic J6eCuest on *inds ,o+ Data for 8 ins. Stop the *inds >DP sessions. Stop lo++in+ on )+ilent 6epeat Steps = -F for two ore runs Save the >/ and *inds files
>/ would start the attach process IP address verified
>/ lo+ files collected
Key etrics& 1. Phsical ,aer Downlin )irlin hrou+hput Pea $. )pplication ,aer hrou+hput 8. Initial pecte: esult& Pea put should be 04bps
E>pecte: Test $uration& 0.9 da 5++2
*in7le /ser /plin@ Airlin@ T
Test O%ecti!es& est 'alidate the perforance b conductin+ sin+le-user stationar and liited obilit tests on pre-selected locations in an ebedded sector and in a liited drive route within the sae sector( respectivel. he tests shall be perfored usin+ both >DP applications for perforance coparison( and under no loadin+.
Test $escription& ests will be executed in 2lose-,oop Spatial 4ultiplexin+ ?2,S4@.
;or the stationar tests( the test >/ will be located at selected locations in an ebedded Alcatel-Lucent– Proprietary See notice on first pa+e
$0
sector correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@. See for S56 ran+es. ;or the obilit tests( the test >/ will be driven accordin+ to the predefined drive route.
)+ilent ool( p:
) drive test van will be used with rooftop ounted antennas 1./nsure that 9004< file is available at the client laptop for uploads $./nsure that SI6 tar+et is set to 1Bd< at the e5ode<
Proce:ure& Action
esponse
1
Par test 'an at predeterined location on 52 route.
$
Open )+ilent and connect >/ to the )+ilent tool.
8
Power the >/ and ensure that the ri+ht port is assi+ned to the >/. 2hec that 3PS is worin+ on )+ilent and *inds Open ,3/ ,/ 24 and clic on J2onnect
" 9 = B F 10 11
Pin+ the )pplication Server to ae sure >/ has acCuired an IP address Open *inds >DP and confi+ure the ri+ht adapter. Populate the fields with ri+ht values Start lo++in+ )+ilent and clic JSend on *inds ,o+ Data for 8 ins. Stop the *inds >DP sessions. Stop lo++in+ on )+ilent 6epeat Steps = -F for two ore runs Save the >/ and *inds files
>/ would start the attach process IP address verified
>/ lo+ files collected
Alcatel-Lucent– Proprietary See notice on first pa+e
$1
Key etrics& 1. Phsical ,aer >plin )irlin hrou+hput Pea $. )pplication ,aer hrou+hput 8. SI6 tar+et ". Initial
Output& Phsical ,aer >plin )irlin hrou+hput Pea should be recorded.
E>pecte: esult& Pea put should be $04bps
E>pecte: Test $uration& 0.9 da
5++3
*in7le /ser $oHnlin@ L( T
Test O%ecti!es& est 'alidate the perforance b conductin+ sin+le-user stationar and liited obilit tests on pre-selected locations in an ebedded sector and in a liited drive route within the sae sector( respectivel. he tests shall be perfored usin+ both >DP applications for perforance coparison( and under 90M cell loadin+ conditions.
Test $escription& ests will be executed in 2lose-,oop Spatial 4ultiplexin+ ?2,S4@.
;or the stationar tests( the test >/ will be located at selected locations in an ebedded sector correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@. See for S56 ran+es. ;or the obilit tests( the test >/ will be driven accordin+ to the predefined drive route. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ will be +enerated b occupin+ portions of the 6esource p: Alcatel-Lucent– Proprietary See notice on first pa+e
$$
) drive test van will be used with rooftop ounted antennas 1. $. 8. ". 9.
/nsure that 9004< file is available at the servers for downloads /nsure that x#6x )ntenna 2orrection is below $0M /nsure that >/ is reportin+ 6an of $ /nsure that antenna on the est van are cross polari!ed /nsure that 2P *indow si!e of client laptop is set to 91$btes
Proce:ure& Action
esponse
1
Par test 'an at predeterined location on 52 route.
$
Open )+ilent and connect >/ to the )+ilent tool.
8
Power the >/ and ensure that the ri+ht port is assi+ned to the >/. 2hec that 3PS is worin+ on )+ilent and *inds Open ,3/ ,/ 24 and clic on J2onnect
" 9 = B F 10 11
Pin+ the )pplication Server to ae sure >/ has acCuired an IP address Open *inds >DP and confi+ure the ri+ht adapter. Populate the fields with ri+ht values Start lo++in+ )+ilent and clic J6eCuest on *inds ,o+ Data for 8 ins. Stop the *inds >DP sessions. Stop lo++in+ on )+ilent 6epeat Steps = -F for two ore runs Save the >/ and *inds files
>/ would start the attach process IP address verified
>/ lo+ files collected
Key etrics& 1. Phsical ,aer Downlin 6,2 hrou+hput Pea $. )pplication ,aer hrou+hput 8. Initial
Output& Pea Downlin 6,2 laer throu+hput should be recorded.
E>pecte: esult& Pea put should be 994bps
E>pecte: Test $uration& 0.9 da 5++5
*in7le /ser /plin@ L( T
Test O%ecti!es& est 'alidate the perforance b conductin+ sin+le-user stationar and Alcatel-Lucent– Proprietary See notice on first pa+e
$8
liited obilit tests on pre-selected locations in an ebedded sector and in a liited drive route within the sae sector( respectivel. he tests shall be perfored usin+ both >DP applications for perforance coparison( and under no loadin+.
Test $escription& ests will be executed in 2lose-,oop Spatial 4ultiplexin+ ?2,S4@.
;or the stationar tests( the test >/ will be located at selected locations in an ebedded sector correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@. See for S56 ran+es. ;or the obilit tests( the test >/ will be driven accordin+ to the predefined drive route.
)+ilent ool( p:
) drive test van will be used with rooftop ounted antennas 1./nsure that 9004< file is available at the client laptop for uploads $./nsure that SI6 tar+et is set to 1Bd< at the e5ode<
Proce:ure& Action
esponse
1
Par test 'an at predeterined location on 52 route.
$
Open )+ilent and connect >/ to the )+ilent tool.
8
Power the >/ and ensure that the ri+ht port is assi+ned to the >/. 2hec that 3PS is worin+ on )+ilent and *inds Open ,3/ ,/ 24 and clic on J2onnect
" 9 = B
Pin+ the )pplication Server to ae sure >/ has acCuired an IP address Open *inds >DP and confi+ure the ri+ht adapter. Populate the fields with ri+ht values Start lo++in+ )+ilent and clic JSend on *inds ,o+ Data for 8 ins.
>/ would start the attach process IP address verified
>/ lo+ files collected
Alcatel-Lucent– Proprietary See notice on first pa+e
$"
F 10 11
Stop the *inds >DP sessions. Stop lo++in+ on )+ilent 6epeat Steps = -F for two ore runs Save the >/ and *inds files
Key etrics& 1. Phsical ,aer >plin 6,2 hrou+hput Pea $. )pplication ,aer hrou+hput 8. SI6 tar+et ". Initial
Output& Pea >plin 6,2 laer throu+hput should be recorded
E>pecte: esult& Pea put should be 1B4bps
E>pecte: Test $uration& 0.9 da
Alcatel-Lucent– Proprietary See notice on first pa+e
$9
Alcatel-Lucent– Proprietary See notice on first pa+e
$
5++9
*in7le /ser $oHnlin@ P
Test O%ecti!es& /valuate the )vera+e Downlin Phsical ,aer hrou+hput in a cluster of 19 G $0 e5ode
;or the cluster test( the test >/ will be driven accordin+ to the predefined drive route. he route definition would cover S56 distribution that reflect 52( 42( 2/. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ will be +enerated b occupin+ portions of the 6esource
Test *etup& ) drive test van will be used with rooftop ounted antennas 1. /nsure that 9004< file
est 6outes: 5ear 2ell( S561=d< G $1 d< erinal Speeds: Stationar( liited 4obilit ?$9-80@ #hr est Set >p:
) drive test van will be used with rooftop ounted antennas 1./nsure that 9004< file is available at the client laptop for uploads $./nsure that SI6 tar+et is set to 1Bd< at the e5ode<
Proce:ure& Action
esponse
1
Par test 'an at predeterined location on 52 route.
$
Open )+ilent and connect >/ to the )+ilent tool.
8
Power the >/ and ensure that the ri+ht port is assi+ned to the >/. 2hec that 3PS is worin+ on )+ilent and *inds Open ,3/ ,/ 24 and clic on J2onnect
"
>/ would start the attach process
Alcatel-Lucent– Proprietary See notice on first pa+e
$=
9 = B F 10 11
Pin+ the )pplication Server to ae sure >/ has acCuired an IP address Open *inds >DP and confi+ure the ri+ht adapter. Populate the fields with ri+ht values Start lo++in+ )+ilent and clic JSend on *inds ,o+ Data for 8 ins. Stop the *inds >DP sessions. Stop lo++in+ on )+ilent 6epeat Steps = -F for two ore runs Save the >/ and *inds files
IP address verified
>/ lo+ files collected
Key etrics& 1. Phsical ,aer >plin 6,2 hrou+hput Pea =. )pplication ,aer hrou+hput B. SI6 tar+et F. Initial
Output& Pea >plin 6,2 laer throu+hput should be recorded
E>pecte: esult& Pea put should be 1B4bps
E>pecte: Test $uration& 0.9 da Key etrics& =. Phsical ,aer Downlin hrou+hput 4ean B. )pplication ,aer hrou+hput F. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
$B
5+4 5+4+1
)est Effort *ector T
Test O%ecti!es& /valuate the sector throu+hput for ultiple >/s at stationar locations and for liited obilit drive tests within the sae sector. ests will be conducted under unloaded and loaded conditions( and for >DP and ;P applications. Test $escription& hree different scenarios will be tested: Open-,oop Spatial 4ultiplexin+ ?O,S4@( S;<2 and SI4O
;or the stationar tests( B test >/s will be placed at selected locations correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@( 4id 2ell ?42@( and 2ell /d+e ?2/@ locations. he B >/s will be placed in a ?$( "( $@ confi+uration: $ >/s at 52( " >/s at 42 and $ >/s at 2/ locations ?shown as $"$ in ables below@. he B >/s will be placed in four different vans ?'1-'" in ables below@ with $ >/s in each van. See /rror: 6eference source not found for S56 ran+es. ;our different sets of ?$( "( $@ confi+urations will be tested ?,oc1-" in ables below@. ;or the obilit tests the test >/s will be driven accordin+ to a predefined liited obilit ?sin+le sector@ drive route. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ will be +enerated b occupin+ portions of the 6esource
Key etrics& 1. Phsical ,aer hrou+hput $. )pplication ,aer hrou+hput ?>DP#;P@ 8. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
$F
5+4+2
/plin@ )est Effort *ector T
Test O%ecti!es& /valuate the sector throu+hput for ultiple >/s at stationar locations in an ebedded sector and for liited obilit drive tests within the sae sector. ests will be conducted under unloaded and loaded conditions( and for >DP and ;P applications. Test $escription& ;or the stationar tests the test >/s will be located at selected locations correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@( 4id 2ell ?42@( and 2ell /d+e ?2/@. See /rror: 6eference source not found for S56 ran+es. ;or the obilit tests the test >/s will be driven accordin+ to a predefined liited obilit ?sin+le sector@ drive route
,oadin+ is +enerated b placin+ loadin+ >/s in nei+hborin+ cells at pre-selected locations. ,oadin+ of 100M will result in an Io of
Key etrics& 1. Phsical ,aer hrou+hput $. )pplication ,aer hrou+hput ?>DP#;P@ 8. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
80
5+4+3
/plin@ /-IO *ector T
Test O%ecti!es& /valuate the sector throu+hput with 4>-4I4O at stationar locations and for liited obilit drive tests. ests will be conducted under unloaded and loaded conditions( and for >DP and ;P applications.
Test $escription& ;or the stationar tests the test >/s will be located at selected locations correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@( 4id 2ell ?42@( and 2ell /d+e ?2/@. See /rror: 6eference source not found for S56 ran+es. ;or the obilit tests the test >/s will be driven accordin+ to a predefined liited obilit ?sin+le sector@ drive route.
,oadin+ is +enerated b placin+ loadin+ >/s in nei+hborin+ cells at pre-selected locations. ,oadin+ of 100M will result in an Io of -4I4O ipleentation allows for up to " >/s paired ?$ pairs@. Test *etup& 1. One or ore drive test vans will be used with rooftop ounted antennas $. /ach stationar location consists of a uniCue set of ?52(42(2/@ locations
Key etrics& 1. Phsical ,aer hrou+hput $. )pplication ,aer hrou+hput ?>DP#;P@ 8. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
81
5+8
$oHnlin@ *c
Test O%ecti!es& /valuate the Scheduler perforance for ultiple >/s at stationar locations and for liited obilit drive tests within the sae sector. ests will be conducted under loaded conditions with >DP and ;P applications. hree Scheduler settin+s will be tested: proportionalfair ?P;@( conservative ?2O@( and a++ressive ?)3@.
Test $escription&
Settin+s coon to all tests: - Open-,oop Spatial ultiplexin+ ?O,S4@ ode - 100M loadin+ on D, of nei+hbor cells ;or the stationar tests( B test >/s will be placed at selected locations correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@( 4id 2ell ?42@( and 2ell /d+e ?2/@ locations. he B >/s will be placed in four different vans with $ >/s in each van. he nuber of active >/s will be increased increentall to illustrate the schedulin+ +ain. ;or the stationar cases( each cobination of a subset of the B >/s will be depicted as a triplet ?x( ( !@ in the tables below to represent the nuber of active >/s at each of the three locations. ;or the cases with a ix of stationar and obilit >/s( each cobination of a subset of the B >/s will be depicted as a Cuartet ?x( ( !( @ where will denote the nuber of obilit >/s. See /rror: 6eference source not found for S56 ran+es. ;or the obilit tests the test >/s will be driven accordin+ to a pre defined liited obilit ?sin+le sector@ drive route. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ of 100M will be used for the tests.
Test *etup& 1. One or ore drive test vans will be used with rooftop ounted antennas
Key etrics& 1. Phsical ,aer hrou+hput $. )pplication ,aer hrou+hput 8. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
8$
5+
/plin@ *c
Test O%ecti!es& /valuate the uplin scheduler perforance for ultiple >/s at stationar locations and for liited obilit drive tests within the sae sector. ests will be conducted under loaded conditions with >DP and ;P applications. hree Scheduler settin+s will be tested: proportional-fair ?P;@( conservative ?2O@( and a++ressive ?)3@. Test $escription&
;or the stationar tests( B test >/s will be placed at selected locations correspondin+ to the appropriate S56 ran+es for 5ear 2ell ?52@( 4id 2ell ?42@( and 2ell /d+e ?2/@ locations. he B >/s will be placed in four different vans with $ >/s in each van. he nuber of active >/s will be increased increentall to illustrate the schedulin+ +ain. ;or the stationar cases( each cobination of a subset of the B >/s will be depicted as a triplet ?x( ( !@ in the tables below to represent the nuber of active >/s at each of the three locations. ;or the cases with a ix of stationar and obilit >/s( each cobination of a subset of the B >/s will be depicted as a Cuartet ?x( ( !( @ where will denote the nuber of obilit >/s. See /rror: 6eference source not found for S56 ran+es. ;or the obilit tests the test >/s will be driven accordin+ to a pre-defined liited obilit ?sin+le sector@ drive route. )ll tests will be executed with 100M >, loadin+. he uplin loadin+ will be +enerated b placin+ loadin+ >/s in the nei+hborin+ cells to +enerate an Io correspondin+ to 100M loadin+ in the tar+et sector.
Test *etup& 1. One or ore drive test vans will be used with rooftop ounted antennas
Key etrics& 1. Phsical ,aer hrou+hput $. )pplication ,aer hrou+hput 8. Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
88
5+10 Latency (-plane Test O%ecti!es& o assess the control plane latenc associated with call setup events Test $escription& his test will deterine the call setup tie. he dela will be easured fro the first 6)27 attept to the tie the >/ copletes traffic channel setup. his test will be executed with >/ in and 3<6 odes.
ests will also be executed to easure obile terinated connection setup tie. hese tests will also be executed with >/ in and 3<6 odes. 9+9+1 (-Plane Latency Test (ase
Priority
9.9.1.1
7 7 7 7
9.9.1.$ 9.9.1.8 9.9.1."
Test (ase $escription
>/Init52 >/-Init52HoS >/er52 >/er52HoS
(all *etup
>/ Initiated >/ Initiated >/ erinated >/ erinated
o* of t
3<6 3<6
Proce:ure&
1. $. 8. ". 9. . =.
)E (-Plane Latency Set the lo+ as for the D4 tool to include the debu+ essa+es. Initiate a call fro the test >/ with the >/ in ode Initiate a call fro the networ side to the >/ with >/ in ode 6epeat 100 ties each o* (-Plane Latency Initiate a call fro the test >/ with >/ in 3<6 HoS ode Initiate a call fro the networ side to the >/ with >/ in 3<6 HoS ode 6epeat 100 ties each
Key etrics Bper /EC& 1. 2all Setup ie
Alcatel-Lucent– Proprietary See notice on first pa+e
8"
um%er of /Es
1 1 1 1
5+11 Latency /-plane Test O%ecti!es& o assess the end user experienced latenc. o easure the round trip dela fro the tie a pacet is +enerated at the IP level to the tie a response is received. Test $escription& his test will be conducted with a total of B >/s placed at different sector locations ?52( 42( /2@. Pin+ tests with 8$ btes#1"$ btes will be executed on the test >/ ?#3<6 HoS odes@ while bi-directional IP traffic will be run on the o ther >/s to +enerate D, and >, loadin+. he nuber of loadin+ >/s will be varied in the tests. Proce:ure&
1. $. 8. ".
/-Plane Latency /xecute 8$ bte Pin+ tests on the B >/s one at a tie for 80 seconds each. /xecute 8$ bte Pin+ tests on the test >/1 with bi-direction IP traffic runnin+ on the other loadin+ >/s ?8 >/s( 9 >/s and = >/s@ 6epeat steps 1 and $ the test with a pin+ paload si!e of 1"$ <tes. 6epeat steps 1-8 with >/ in 3<6 ode
Key etrics Bper /EC& 1. 6esource >tili!ation $. ransport ;orat Distribution 8. ,atenc ". Phsical ,aer hrou+hput 9. )pplication ,aer hrou+hput >DPQ . Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
89
5+12 uality of *er!ice Test O%ecti!es& o assess the HoS perforance of an ,/ >/ with 'oIP and 7P applications in various ulti->/ loadin+ scenarios Test $escription& #oIP o* Test& his test will be executed with the test >/ in 'oIP ode. ests will be executed under different loadin+ conditions. he loadin+ >/s will be executin+ traffic. he nuber of loadin+ >/s will be varied fro 8 to = and the will be placed at a 5ear 2ell location. "TTP o* Test& his test will be executed with the test >/ in 3<6 ode runnin+ 7P application. ests will be executed under different loadin+ con ditions. he loadin+ >/s will be executin+ traffic. he nuber of loadin+ >/s will be va ried fro 8 to = and the will be placed at a 5ear 2ell location.
Proce:ure&
1.
$.
8.
". 9.
') #OIP o* Test 2onfi+ure test >/Ls 4)2 Downlin Scheduler with the followin+ settin+s: a. 'oIP ;la+ R rue b. Initial 42S: 9 ?HPSK( 2ode 6ate 0."8B@ c. 7)6H 4ax 5uber of ransissions: 1 2onfi+ure test >/ with the followin+ >,#D, ; inforation: a. 6eote IP address#subnet as b. Port 6an+e for 6P#62P: 10000 G 10010 c. Protocol: >DP 2onfi+ure test >/ with the followin+ HoS Inforation: a. HoS 2lass Identifier ?H2I@: 1 b. >,#D, 4<6: ?not used@ c. >,#D, 3<6: ?not used@ Initiate a call fro >/1 to Ix2hariot to siulate voice traffic. Increentall add >/s with best effort IP transfers until ou have = active >/s. 6epeat steps 1 G " for the 4id 2ell and the 2ell /d+e +eoetries
') "TTP o* Test . 6epeat steps 1-8 and activate Ix2hariot. Initiate an 7P session at the 5ear 2ell location. Increentall add >/s with best effort IP transfers until ou have = active >/s. 6epeat the tests for both the 4id 2ell and the 2ell /d+e locations Key etrics Bper /EC& 1. 6esource >tili!ation $. ransport ;orat Distribution Alcatel-Lucent– Proprietary See notice on first pa+e
8
8. ". 9. . =. B.
,atenc 4ean Opinion Score Phsical ,aer hrou+hput )pplication ,aer hrou+hput >DPQ Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
8=
5+13 (o!era7e Testin7 Test O%ecti!es& 'alidate the covera+e for sin+le->/ tests on the pre-selected drive route. ests will be conducted under interfered and non-interfered conditions for >DP application. Test $escription& est >/ will be driven accordin+ to the pre-selected drive route fro 5ear 2ell ?52@ to 2ell /d+e ?2/@ until call drops. >plin ?>,@ interference is +enerated b placin+ loadin+ >/s in nei+hborin+ cells at pre-selected locations. D,,S will be used to +enerate D, interference in the nei+hborin+ cells. Interference of 100M will result in an Interference over heral ?Io@ of , and >/ for D,@( while interference of 90M will result in an Io of , and D, phsical-laer data rate and Si+nal to Interference plus 5oise 6atio ?SI56@ will be easured and si+nalin+ will be recorded in the tests.
Proce:ure& /L Tests
1. Set SI56 tar+et in nei+hborin+ cells to control the power of loadin+ >/s $. Place loadin+ >/s in nei+hborin+ cells at pre-selected locations to +enerate desired Io in the tar+et cell 8. 4ae a >DP / and easure both >, and D, phsical-laer data rates( SI56( and record the si+nalin+ essa+es ". Place the test >/ in a van and drive on a pre-selected route fro 52 to 2/ of the tar+et cell until the call drops 9. 6epeat steps 1 to " for each interference condition $L Tests
1. Set D,,S in nei+hborin+ cells to +enerate desired D, interference levels $. 4ae a >DP call on the test >/ fro the tar+et cell and easure both >, and D, phsicallaer data rates( SI56( and record the si+nalin+ essa+es 8. Place the test >/ in a van and drive on a pre-selected route fro 52 to 2/ of the tar+et cell until the call drops ". 6epeat steps 1 to 8 for each interference condition
Key etrics& 1. Phsical ,aer hrou+hput $. SI56 8. PD227 error rate
Alcatel-Lucent– Proprietary See notice on first pa+e
8B
5+15 "an:o!er Test O%ecti!es& /valuate handover perforance in followin+ scenarios: - Intra-Site ?different sectors within one e5ode<@ - Inter-Site ?different e5odenloaded Destination e5ode
Test $escription&
est >/ will be driven alon+ two routes: 7andover 6oute coprisin+ of intra and inter e5ode< handovers between 8-" • sectors. On this route( additional >/s will be stationed in each sector alon+ the drive route. hese >/s will load both downlin and uplin of their respective sectors with traffic. 2luster 6oute coprisin+ of intra and inter e5ode< hand overs in the entire 10 • e5ode< 2luster. Onl D, loadin+ will be +e nerated via D,,S on this route. 5on-+uaranteed and +uaranteed Hualit of Service ?HoS@ tests will be conducted via , and D, SI56 ?Si+nal to Interference plus 5oise 6atio@ will be easured and Si+nalin+ essa+es will be recorded in the tests. Key etrics& 1. Phsical ,aer hrou+hput $. SI56 8. ,atenc
Alcatel-Lucent– Proprietary See notice on first pa+e
8F
5+19 #-Pol !s+ (ross-Pol Test O%ecti!es& 2opare the perforance of 'erticall and 2ross polari!ed antenna confi+urations
Test $escription&
Settin+s coon to all tests: - Open-,oop Spatial ultiplexin+ ?O,S4@ ode - 100M loadin+ on D, of nei+hbor cells - Stationar ) sin+le >/ will be used for all the tests. ests will be executed in 52( 42 and /2 locations with >DP and ;P applications on both D, and >,. ;or the '-pol ?verticall polari!ed@ tests( both the e5ode< and >/ antennas will be set to the ' pol confi+urations. Siilarl( for the E-pol ?cross polari!ed@ tests( both the e5ode< and >/ antennas will be set to the E-pol confi+urations. D,,S will be used to load the D, of the cells nei+hborin+ the tar+et cell. ,oadin+ of 100M will be used for all the tests.
Test *etup& 1. One test van will be used with rooftop ounted antennas
Proce:ure&
1. Set the e5< and >/ to '-pol confi+uration $. 6un D,#>, >DP#;P tests in each of 52( 42 and /2 locations 8. 6epeat for E-pol confi+uration settin+
Key etrics& 1. 2hannel 2orrelation Statistics at >/ for D, tests $. Phsical ,aer hrou+hput 8. )pplication ,aer hrou+hput ". Initial
Alcatel-Lucent– Proprietary See notice on first pa+e
"0