LARSEN & TOUBRO LIMITED
FCCE
FOUNDATION FORMWORK FEATURES 1. Suitable for side formwork of substructures, where timber components have less life and reuses. 2. Maximum concrete pressure should be 10 KN / sq.m 3. Steel panels of standard sizes. 4. Easy assembly with dimensional accuracy.
Floor Form 1200 x 300
ITEM CODE: 1562 0031 x
Weight : 18.00 kg
Floor Form 1200 x 600
ITEM CODE: 1562 0065 x
Weight : 29.73 kg
Floor Form 600 x 300
ITEM CODE: 1562 0058 x
Weight : 9.45 kg
Floor Form 900 x 300
ITEM CODE: 1562 0032 x
Weight : 13.62 kg
Floor Form 900 x 600
ITEM CODE: 1562 0063 x
Weight : 22.76 kg
Floor Form
¾ Used for forming the shape of foundation with related accessories and supports.
Form Clip
ITEM CODE: 1562 0050 x
Weight : 0.12 kg
Floor clip
¾ To connect floor form together in both directions.
COMPONENTS LIST
8
LARSEN & TOUBRO LIMITED
FCCE
Floor Form Corner 600
ITEM CODE: 1562 0039 x
Weight : 2.50 kg
Floor Form Corner 900
ITEM CODE: 1562 0051 x
Weight : 3.70 kg
Floor Form Corner 1200
ITEM CODE: 1562 0052 x
Weight : 5.00 kg
Floor Form Corner
¾ Used at outside corner and fitted with floor form and form clip.
Lapping Plate 1200
ITEM CODE: 1562 0038 x
Weight : 18.60 kg
Lapping Plate 900
ITEM CODE: 1562 0056 x
Weight : 12.45 kg
Lapping Plate 600
ITEM CODE: 1562 0057 x
Weight : 8..31 kg
Lapping Plate
¾ Used at gaps (upto 300mm) between the floor forms.
Pipe Waler 3000 lg.
ITEM CODE: 1562 0145 x
Weight : 18.55 kg
Pipe Waler 2000 lg.
ITEM CODE: 1562 0054 x
Weight : 12.35 kg
Pipe Waler 1500 lg.
ITEM CODE: 1562 0059 x
Weight : 9.27 kg
Pipe waler
¾ Used behind the floor form with the help of pipe waler clamp.
COMPONENTS LIST
9
LARSEN & TOUBRO LIMITED Pipe Waler Clamp
FCCE ITEM CODE: 1562 0028 x
Weight : 1.30 kg
Pipe waler clamp
¾ To fix the pipe waler with floor form Waler Connector
ITEM CODE: 1562 0037 x
Weight : 0.75 kg
Waler Connector
¾ To connect the steel waler with the pipe waler Threaded plug for floor form (PVC)
ITEM CODE: 3847 0142 x
Weight: 0.1 kg
Threaded Plug for Floor Form
¾ To plug the hole in the floor form
COMPONENTS LIST
10
LARSEN & TOUBRO LIMITED
FCCE
WALL / COLUMN FORMWORK FEATURES 1. For formwork of vertical and near vertical surfaces like walls or columns a wide range of plan configuration, using standard components. 2. High strength tie systems bear maximum concrete pressure, so that load bearing struts can be avoided. 3. Large panels can be handled using crane and smaller panels are to be handled manually. 4. Provision for fixing scaffolding platform and alignment units are built – in. 5. In case of tall structures the wall panels are used along with climbing formwork system. 6. Smooth surface (concrete finish) is obtained by minimizing the sheathing joints and eliminating the offsets. 7. Careful planning for reuse of panels can eliminate reassembling to suit different plan dimensions.
Adjustable splice plate
ITEM CODE: 1514 1270 x
Weight : 12.47 kg
Adjustable splice plate
¾ To connect the steel walers in circular wall formwork
COMPONENTS LIST
11
LARSEN & TOUBRO LIMITED
FCCE
Adjustable Waling Extn.1.20m
ITEM CODE: 1314 1130 x
Weight : 14.18 kg
Adjustable Waling Extn.0.65m
ITEM CODE: 1514 1120 x
Weight : 7.68 kg
Adjustable Waling
¾ To adjust the spacing between standard size panel (200 mm using 0.65 m extension and 200mm to 400 mm using 1.20 m extension) Splice Plate
ITEM CODE: 1514 1110 x
Weight : 7.18 kg
Splice Plate ¾ To connect the standard panel together. Angle Plate
ITEM CODE: 1514 2020 x
Weight : 12.19 kg
Angle Plate
¾ To maintain 90˚ in column form work and to connect side shutters. Assembly Angle (Tool)
ITEM CODE: 1514 1170 x
Weight : 4.90 kg
Assembly Angle (Tool)
¾ To fix the plywood in position with timber beam. COMPONENTS LIST
12
LARSEN & TOUBRO LIMITED
Lifting Bracket
FCCE
ITEM CODE: 1514 1180 x
Weight : 3.75 kg
Lifting Bracket
¾ To lift shutters with crane. Anchor Plate 12/12
ITEM CODE: 1515 0021 x
Weight : 1.36 kg
Anchor Plate
¾ Tightening of tie rod with wing nut for better bearing. Head Adapter
ITEM CODE: 1514 1200 x
Weight : 6.26 kg
Head Adapter
¾ To fix CT prop and supporting bracket with steel waler to transfer force from alignment props to the formwork.
COMPONENTS LIST
13
LARSEN & TOUBRO LIMITED Foot Adapter
FCCE ITEM CODE: 1514 1210 x
Weight : 10.09 kg
Foot Adapter
¾ To transfer the forces from alignment props to the floor. Universal outside fixing
ITEM CODE: 1514 1150 x
Weight : 3.55 kg
Universal outside fixing
¾ To connect the two side shutters with tie rod for outside corners of wall / column. Flange Claw Assembly
ITEM CODE: 1514 2030 x
Weight : 2.07 kg
Flange claw Assembly
¾ To connect the timber beam steel waler. Connecting Pin 19 x 130
ITEM CODE: 1514 1160 x
Weight : 0.32 kg
Connecting Pin
¾ To fix the splice plate, UOF, angle plate, awe with steel waler. COMPONENTS LIST
14
LARSEN & TOUBRO LIMITED
FCCE
Steel waler 0.8 m
ITEM CODE: 1514 1070 x
Weight : 15.72 kg
Steel waler 1.2 m
ITEM CODE: 1514 1080 x
Weight : 23.22 kg
Steel waler 1.6 m
ITEM CODE: 1515 0072 x
Weight : 31.02 kg
Steel waler 2.0 m
ITEM CODE: 1515 0071 x
Weight : 38.82 kg
Steel waler 2.4 m
ITEM CODE: 1514 1090 x
Weight : 46.44 kg
Steel Waler
¾ Acts as a spanning member. Beam Clamp
ITEM CODE: 1514 1140 x
Weight : 1.05 kg
Beam Clamp ¾ To fix the timber beam with Adjustable waling extension. H – Beam Splice
ITEM CODE: 1514 1250 x
Weight : 9.29 kg
H – Beam Splice ¾ To connect the H – Beams for increasing the beam length.
COMPONENTS LIST
15
LARSEN & TOUBRO LIMITED
Drilling Plate & Safe Guard (Tool)
FCCE
ITEM CODE: 1514 1220 x
Weight : 14.44 kg
Drilling Plate & Safe Guard (Tool) ¾ To drill the holes in the timber beam flanges. Wing Nut
ITEM CODE: 1514 7030 x
Weight : 0.40 kg
Wing Nut
¾ For fixing of tie rod Tie Rod 18.0. 500
ITEM CODE: 1514 7021 x
Weight : 0.81 kg
Tie Rod 18.0. 750
ITEM CODE: 1514 7027 x
Weight : 1.22 kg
Tie Rod 18.0. 1000
ITEM CODE: 1514 7022 x
Weight : 1.62 kg
Tie Rod 18.0. 1500
ITEM CODE: 1514 7023 x
Weight : 3.43 kg
Tie Rod 18.0. 2000
ITEM CODE: 1514 7024 x
Weight : 3.24 kg
Tie Rod 18.0. 2500
ITEM CODE: 1514 7025 x
Weight : 4.05 kg
Tie Rod 18.0. 3000
ITEM CODE: 1514 7026 x
Weight : 4.86 kg
Tie Rod
¾ To with stand the concrete pressure.
COMPONENTS LIST
16
LARSEN & TOUBRO LIMITED Top Scaffold Bracket 60
FCCE ITEM CODE: 1514 1190 x
Weight : 13.94 kg
Top Scaffold Bracket 60
¾ Fixed with timber beam and used as working platform H-16 Timber Beam 1200lg
ITEM CODE : 1524 9961 x
Weight : 6.00 kg
H-16 Timber Beam 1800lg
ITEM CODE: 1524 9962 x
Weight : 9.00 kg
H-16 Timber Beam 2400lg
ITEM CODE: 1524 9963 x
Weight : 12.00 kg
H-16 Timber Beam 3000lg
ITEM CODE: 1524 9964 x
Weight : 15.00 kg
H-16 Timber Beam 3600lg
ITEM CODE : 1524 9965 x
Weight : 18.00 kg
H-20 Timber Beam 1200lg
ITEM CODE : 1524 9201 x
Weight : 8.16 kg
H-20 Timber Beam 1800lg
ITEM CODE : 1524 9202 x
Weight : 12.24 kg
H-20 Timber Beam 2400lg
ITEM CODE : 1524 9203 x
Weight : 16.32 kg
H-20 Timber Beam 3000lg
ITEM CODE : 1524 9204 x
Weight : 20.40 kg
H-16 Timber Beam 3600lg
ITEM CODE : 1524 9205 x
Weight : 24.48 kg
H-20 Steel Beam 1800lg
ITEM CODE : 1525 0103 x
Weight : 18.00 kg
H-20 Steel Beam 2400lg
ITEM CODE : 1525 0104 x
Weight : 24.00 kg
Timber Beam & Steel
¾ Supporting and spanning member of plywood.
COMPONENTS LIST
17
LARSEN & TOUBRO LIMITED
FCCE
Scaffolding Pipe 6.0 m lg.
ITEM CODE: 1516 4241 x
Weight : 19.38 kg
Scaffolding Pipe 4.0 m lg.
ITEM CODE: 1516 4242 x
Weight : 12.92 kg
Scaffolding Pipe 3.0 m lg.
ITEM CODE: 1516 4243 x
Weight : 9.69 kg
Scaffolding Pipe
¾ For hand rails and bracings Screw on Coupler 40
ITEM CODE: 1516 4250 x
Weight : 0.65 kg
Screw on Coupler 80
ITEM CODE: 1516 4251 x
Weight : 0.90 kg
Screw on Coupler
¾ To fix the hand rail pipe / post. Tie Rod Cone (PVC)
ITEM CODE: 3847 0034 x
Weight : 0.01 kg
Tie Rod Cone Plug (PVC)
ITEM CODE: 3847 0035 x
Weight : 0.01 kg
Tie Rod Tube (PVC)
ITEM CODE: 3847 0141 x
Weight : 1.0 /m.
Tie Rod Tube Plug (PVC)
ITEM CODE: 3847 0140 x
Weight : 0.01 kg
Tie Rod accessories
¾ To ensure the proper fixing of PVC Tubes at tie rod location and to prevent the slurry loss. COMPONENTS LIST
18
LARSEN & TOUBRO LIMITED
FCCE
FLEX SYSTEM FEATURES 1. For slab and beam formwork up to floor heights of 4.4 m (provides the option of choosing conventional system or Beam Forming Support system for beam formwork above primary layer of decking) 2. Removable folding tripods make selected individual props self-standing. 3. Flexibility in spacing between the individual props. 4. Components are light enough for erecting and dismantling manually. 5. Lapping of standard lengths of H-beams both in primary and secondary layers avoid their cutting at site. 6. Steel members can also be used for decking. 7. Avoids skilled labour at site. 8. Enables re-propping and frequent reuse of materials. Floor Prop CT 250(SN)
ITEM CODE: 1513 0151 x
Weight : 12.75 kg
Floor Prop CT 300(SN)
ITEM CODE: 1512 6030 x
Weight : 14.96 kg
Floor Prop CT 340(SN)
ITEM CODE: 1512 6040 x
Weight : 16.40 kg
Floor Prop CT 410(SN)
ITEM CODE: 1512 6050 x
Weight : 19.30 kg
Floor Prop CT
¾ Alignment and load bearing support upto a maximum of 4.10m.
COMPONENTS LIST
19
LARSEN & TOUBRO LIMITED
FCCE
Assembly wedge Clamp (H16)
ITEM CODE: 1513 0067 x
Weight : 2.62 kg
Assembly wedge Clamp (H20)
ITEM CODE: 1512 6175 x
Weight : 2.81 kg
Assembly Wedge Clamp
¾ Used at H – Beam over lapping location. Beam Forming Head
ITEM CODE: 1512 6110 x
Weight : 6.15 kg
Beam Forming Head
¾ Used as a beam bottom support with CT prop. Four Way Head H-16
ITEM CODE: 1512 6090 X
Weight : 3.49 kg
Four Way Head H-20
ITEM CODE: 1513 0015 X
Weight : 3.99 kg
Four Way Head
¾ To place primary H – Beam with CT props.
COMPONENTS LIST
20
LARSEN & TOUBRO LIMITED
Folding Tripod
FCCE
ITEM CODE: 1512 6080 x
Weight : 11.03 kg
Folding Tripod
¾ To ensure the stability of CT props.
COMPONENTS LIST
21
LARSEN & TOUBRO LIMITED
FCCE
BEAM FORMING SUPPORT FEATURES 1. For beam formwork with minimum beam depth of 300 mm excluding slab
thickness (can be used for beams of less depths if packing is given in beam bottom and making it up to 300 mm) i.e. with minimum side formwork height of 300 mm. 2. Uses standard components avoiding skilled making at site. 4. Requires no form ties up to a total beam depth of 900 mm including slab thickness, though use of ties may increase the spacing of beam forming supports. 5. Arrangement on sides remains independent of beam width. 6. Adjustability in side formwork height in 10 mm intervals. 7. Side formwork remains perpendicular to beam bottom. 8. Easy assembling, aligning, fixing and dismantling. Beam Forming Support 20
ITEM CODE: 1528 6148 X
Weight : 8.00 kg
Beam Forming Support 20
¾ To support the beam side.
COMPONENTS LIST
22
LARSEN & TOUBRO LIMITED
Adjustable Beam side Extn.
FCCE
ITEM CODE: 1529 0030 X
Weight : 4.82 kg
Adjustable Beam Side Extension
¾ To support the beam side ply wood wherever space is more than the requirement. Beam Forming Supp .Extn. 0.6m (H20)
ITEM CODE: 1528 6149 x
Weight : 4.93 kg
Beam Forming Supp. Extn. 0.8m (H20)
ITEM CODE: 1529 0075 x
Weight : 5.50 kg
Beam Forming Supp. Extn. 1.0m (H20)
ITEM CODE 1529 0076 x
Weight : 6.75 kg
Beam Forming Supp. Extn. 1.2m (H20)
ITEM CODE: 1529 0137 x
Weight : 8.00 kg
Beam Forming Supp. Extn. 0.6m (H16)
ITEM CODE: 1529 0091 x
Weight : 4.50 kg
Beam Forming Supp. Extn. 0.8m (H16)
ITEM CODE 1529 0090 x
Weight : 5.50 kg
Beam Forming Supp. Extn. 1.0m (H16)
ITEM CODE 1529 0089 x
Weight : 6.75 kg
Beam Forming Supp. Extn. 1.2m (H16)
ITEM CODE 1529 0138 x
Weight : 8.00 kg
Beam Forming Support Extension
¾ To adjust the beam side depth.
COMPONENTS LIST
23
LARSEN & TOUBRO LIMITED
Star Grip Nut 15.0 G
FCCE
ITEM CODE: 1528 7544 X
Weight : 0.60 kg
Stair Grip Nut
¾ To tighten the beam forming support with H - 20 beam.
COMPONENTS LIST
24
LARSEN & TOUBRO LIMITED
FCCE
HEAVY DUTY TOWER SYSTEM FEATURES 1. For slab and beam formwork with tall staging heights and heavier loading,
capacity is 250 KN needing bracing at every 6m in height in both horizontal directions with permanent structure and other towers. 2. Tower can be assembled in plan dimensions of 1524 mm x 1524 mm and 2250 mm x 1524 mm, by choosing the type of bracing, both configurations with four legs of 62.5 KN each. 3. Additional frames can be attached to towers to give twin tower configuration 4. Height adjustments up to a maximum of 800 mm is possible by utilizing both top and bottom tower spindles 5. Easy to obtain plumb using tower spindles at bottom 6. Inclined decking is also possible using tower spindles on top 7. Individual components are light enough to be handled manually for erection and dismantling though tower as a single unit can be handled when crane is available 8. Tower as a whole can be shifted (rolled) manually by attaching transport devices to the legs.
COMPONENTS LIST
25
LARSEN & TOUBRO LIMITED
FCCE
Basic Frame 0.90 M
ITEM CODE: 1516 4020 x
Weight : 24.18 kg
Basic Frame 1.20 M
ITEM CODE: 1516 4030 x
Weight : 28.07 kg
Basic Frame 1.80 M
ITEM CODE: 1516 4040 x
Weight : 37.00 kg
Basic Frame
¾ Used where the floor to floor height is more than 4.10 m. Horizontal Brace 152
ITEM CODE: 1516 4060 x
Weight : 3.16 kg
Horizontal Brace 225
ITEM CODE: 1516 4050 x
Weight : 4.62 kg
Horizontal Brace
¾ To connect the basic frame horizontally. Diagonal Brace 9.152
ITEM CODE: 1516 4070 x
Weight : 3.56 kg
Diagonal Brace 9.225
ITEM CODE: 1517 0074 x
Weight : 4.90 kg
Diagonal Brace 12.152
ITEM CODE: 1516 4080 x
Weight : 3.88 kg
Diagonal Brace 12.225
ITEM CODE: 1516 8040 x
Weight : 5.14 kg
Diagonal Brace 18.152
ITEM CODE: 1516 4090 x
Weight : 4.73 kg
Diagonal Brace 18.225
ITEM CODE: 1517 0073 x
Weight : 7.50 kg
Diagonal Brace ¾ To connect the basic frame diagonally.
COMPONENTS LIST
26
LARSEN & TOUBRO LIMITED Foot Plate
FCCE ITEM CODE: 1516 4130 x
Weight : 2.05 kg
Foot Plate
¾ To distribute the load of the tower on the floor. U - Head
ITEM CODE: 1516 4120 x
Weight : 2.95 kg
U - Head
¾ Steel waler is placed on top of this component to transfer decking load to the legs. Tower Spindle with Lever Nut
ITEM CODE: 1517 0023 x
Weight : 7.00 kg
Tower Spindle Lever Nut
¾ To adjust the height of the tower. COMPONENTS LIST
27
LARSEN & TOUBRO LIMITED
Spring Locked Connecting Pin 16mm
FCCE
ITEM CODE: 1516 4180 x
Weight : 0.26 kg
Spring Locked Connecting Pin
¾ To connect the basic frame vertically with the help of HD coupler.
Coupler
ITEM CODE: 1516 4160 x
Weight : 0.84 kg
Coupler
¾ To connect the basic frame vertically with the help of spring locking pin. Beam Span 2230
ITEM CODE: 1517 0053 x
Weight : 18.93 kg
Beam Span
¾ Used as a load bearing member for beam and slab.
COMPONENTS LIST
28
LARSEN & TOUBRO LIMITED Beam Span Extn. 1525
FCCE ITEM CODE: 1517 0145 x
Weight : 11.20 kg
Beam Span Extension
¾ Used as a load bearing member.
Brace Stirrup
ITEM CODE: 1516 4210 x
Weight : 2.93 kg
Brace Stirrup
¾ To connect primary and secondary beam in beam form work. Scaffold Cantilever Bracket
ITEM CODE: 1517 0143 x
Weight : 20.00 kg
Scaffold Cantilever Bracket
¾ Used as a working platform in outer face of heavy duty tower.
COMPONENTS LIST
29
LARSEN & TOUBRO LIMITED Decking Connecting Pin 19x130
FCCE ITEM CODE: 1517 0010 x
Weight : 0.45 kg
Decking Connecting Pin
¾ Used for connecting the components. Short Prop
ITEM CODE: 1517 0144 x
Weight : 11.51 kg
Short Prop
¾ To be connected with steel waler for slab form work. LTS – Wheel B
ITEM CODE: 1516 4410 x
Weight : 20.00 kg
LTS – Wheel B
¾ To shift Stair tower / Heavy Duty Tower from one place to another. Swivel coupler 40/40
ITEM CODE: 1516 4252 x
Weight : 1.20 kg
Swivel coupler 40/50
ITEM CODE: 1516 4253 x
Weight : 1.35 kg
¾ Used to couple the NB 40 pipe with the pipe and HDT frame.
COMPONENTS LIST
30
LARSEN & TOUBRO LIMITED
FCCE
LIFT SHAFT FORMWORK FEATURES 1. Provides platform for shutter panel and workmen inside the closed area of
liftwell and deshuttering mechanism for stripping of formwork without dismantling the panels or their sheathing. 2. Panels can be lifted integrally in deshuttered position along with platform and erected for next pour. 3. Uses standard wall formwork components with a few additional accessories. Shaft Climbing Pawl
ITEM CODE: 1526 0466 x
Weight : 11.50 kg
Shaft Climbing Pawl
¾ Used for sliding the wall surface during lifting and resting the platform inside the pocket in the wall. ¾ This has to be fixed with both ends of lift shaft main beam. Shaft Corner Plate 2500 lg.
ITEM CODE: 1526 0282 x
Weight : 44.50 kg
Shaft Corner Plate 3300 lg.
ITEM CODE: 1526 0284 x
Weight : 57.75 kg
Shaft Corner Plate 4600 lg.
ITEM CODE: 1526 0285 x
Weight : 60.50 kg
Shaft corner plate
¾ Used at the corners of the lift shaft form work for easy removal of shaft inner face panels. COMPONENTS LIST
31
LARSEN & TOUBRO LIMITED
FCCE
Shaft Beam Extn.1.0 M
ITEM CODE: 1527 0025 x
Weight : 13.40 kg
Shaft Beam Extn.1.6 M
ITEM CODE: 1527 0026 x
Weight : 20.50 kg
Shaft Beam Extension ¾ Used for adjusting the length of the main beam to suit shaft wall dimensions.
Shaft Main Beam end
ITEM CODE: 1526 0029 x
Weight : 17.00 kg
Shaft Main Beam End
¾ Load bearing member for the platform and wall panels. This has to be connected with Extn and climbing pawl.
Shaft Corner Spindle
ITEM CODE: 1526 0264 x
Weight : 15.00 kg
Shaft Corner Spindle
¾ Used to collapse the shutters.
COMPONENTS LIST
32
LARSEN & TOUBRO LIMITED
FCCE
Corner Waling 53x53
ITEM CODE: 1527 0006 x
Weight : 13.41 kg
Corner Waling 53x68
ITEM CODE: 1527 0020 x
Weight : 18.38 kg
Corner Waling 68x68
ITEM CODE: 1527 0011 x
Weight : 21.24 kg
Corner Waling
¾ To form L shape shutters at inside corners. Waler Squaring Plate
ITEM CODE: 1526 0262 x
Weight : 13.45 kg
Waler Squaring Plate
¾ Used at corner location to connect the steel waler of the adjacent shutters.
COMPONENTS LIST
33
LARSEN & TOUBRO LIMITED
FCCE
ACCESS SCAFFOLDING FEATURES 1. Exclusively used for scaffolding purposes up to 40 m height, braced at every
6 m with structure 2. Uses lighter frames compared to those in Heavy Duty Tower staging 3. This provides free movement for workmen without any obstruction at all levels 4. Frames with legs 1 m apart are spaced at 2.25 m intervals with 2.25 m long standard bracings (H-225 and 2H-225) 5 Bracing 2H-225 serves as an essential bracing for stability as well as handrail on the face away from the structure. Scaffold Frame 0.90 M
ITEM CODE: 1561 0094 x
Weight : 13.43 kg
Scaffold Frame 1.20 M
ITEM CODE: 1561 0095 x
Weight : 15.59 kg
Scaffold Frame 1.80 M
ITEM CODE: 1561 0014 x
Weight : 20.49 kg
Scaffold Frame
¾ Acts as a basic frame and used for access purpose. Spring Locked Connecting Pin 14 MM
ITEM CODE: 1513 0008 x
Weight : 0.63 kg
Spring Locked Connecting Pin
¾ To connect the scaffold frame together with the help of LD coupler. COMPONENTS LIST
34
LARSEN & TOUBRO LIMITED
L.D. Foot Plate
FCCE
ITEM CODE: 1561 0130 x
Weight : 1.91 kg
L.D. Foot Plate ¾ Used below the bottom most scaffold frame legs for better bearing.
L.D. Coupler
ITEM CODE: 1561 0062 x
Weight : 1.04 kg
L.D. Coupler ¾ To connect the two scaffolds together vertically using spring locked connecting pin.
Scaffold Coupler
ITEM CODE: 1561 0046 x
Weight : 0.69 kg
Scaffold Coupler
¾ To connect the bottom most scaffold frame with foot plate using spring locked connecting pin.
Scaffold Spindle
ITEM CODE: 1561 0044 x
Weight : 5.22 kg
Scaffold Spindle ¾ Used at the bottom of the scaffold frame for height adjustment.
COMPONENTS LIST
35
LARSEN & TOUBRO LIMITED
2H – 225 Bracing
FCCE
ITEM CODE: 1561 0033 x
Weight : 13.47 kg
2H-225 Bracing
¾ Used as horizontal connection between the scaffold frames. Walkway 225
ITEM CODE: 1561 0160 x
Weight : 20.16 kg
Scaffold Board
¾ Used as a walkway at top of the scaffold frame. Platform Hanger
ITEM CODE: 1561 0020 x
Weight : 0.17 kg
Platform Hanger
¾ Used to connect walkway 225 with access scaffold frame.
COMPONENTS LIST
36
LARSEN & TOUBRO LIMITED
FCCE
STAIR TOWER FEATURES 1. Safe and convenient access up to 100 m height in the form of stair with suitable bracing with permanent structure every 6 m 2. Structural skeleton of Heavy Duty Tower with a few additional accessories 3. Can be handled as a single unit a crane
Stair Bracket 225 Left
ITEM CODE: 1520 8020 x
Weight : 22.27 kg
Stair Bracket 225 Right
ITEM CODE: 1520 8030 x
Weight : 22.27 kg
Stair Bracket
¾ To fix the grid iron and hand rails.
Intermediate Railing 225
ITEM CODE: 1520 8060 x
Weight : 5.46 kg
Intermediate Railing
¾ Used as hand rail for inner side of stair tower.
COMPONENTS LIST
37
LARSEN & TOUBRO LIMITED
Inner Hand Railing 225
FCCE
ITEM CODE: 1520 8070 x
Weight : 5.18 kg
Inner Hand Railing
¾ Fixed in vertical direction with stair bracket and used as inner hand railing.
Connection Angle 225
ITEM CODE: 1520 8080 x
Weight : 5.71 kg
Connection Angle
¾ Used for fixing the bracings / handrails in external face of the stair tower.
Grid Iron
ITEM CODE: 1520 8090 x
Weight : 5.05 kg
Grid Iron
¾ Fitted with stair bracket and used for stepping purpose. COMPONENTS LIST
38
LARSEN & TOUBRO LIMITED
FCCE
FRAMED FORMWORK FRAMI With its modern accessories, Frami is a complete system for forming small areas quickly and economically. The sturdy elements are light in weight and handy to hold. The systems well thought out element grid, with heights of 1.2m and 1.5m and widths between 30cm and 90cm makes it superbly adaptable to all site conditions. On sites served by crane, it is also possible to shift several elements at a time in large-area units. FEATURES 1. Sturdy, torsion proof hollow-sectioned steel frame 2. Hot-dip galvanized for high durability 3. High-grade, 15mm thick, film coated sheathing for high wear resistance 4. Self-aligning, continuously positionable interlinking clamps 5. System-integrated alignment and bracing 6. Easy-to-fasten accessories 7. Integrated handles for easier handling Frami Anchoring Panel 0.65 x 1.20 M
ITEM CODE: 1530 8403 x
Weight: 30.50 kg
Frami Anchoring Panel 0.65 x 1.50 M
ITEM CODE: 1530 8408 x
Weight: 36.00 kg
Frami Anchoring Panel
COMPONENTS LIST
39
LARSEN & TOUBRO LIMITED
FCCE
Frami Panel 0.30 x 1.20 M
ITEM CODE: 1530 8405 x
Weight: 18.5 kg
Frami Panel 0.30 x 1.50 M
ITEM CODE: 1530 8410 x
Weight: 23.50 kg
Frami Panel 0.45 x 1.20 M
ITEM CODE: 1530 8404 x
Weight: 23.30 kg
Frami Panel 0.45 x 1.50 M
ITEM CODE: 1530 8409 x
Weight: 29.30 kg
Frami Panel 0.75 x 1.20 M
ITEM CODE: 1530 8447 x
Weight: 31.50 kg
Frami Panel 0.75 x 1.50 M
ITEM CODE: 1530 8448 x
Weight: 39.00 kg
Frami Panel 0.90 x 1.20 M
ITEM CODE: 1530 8401 x
Weight: 35.40 kg
Frami Panel 0.90 x 1.50 M
ITEM CODE: 1530 8406 x
Weight: 43.70 kg
Frami Panel
¾ Used as a formwork panel for raft foundation, footing and wall. Frami Universal Panel 0.45 x 1.20 M
ITEM CODE: 1531 0165 x
Weight: 23.30 kg
Frami Universal Panel 0.45 x 1.50 M
ITEM CODE: 1531 0166 x
Weight: 29.30 kg
Frami Universal Panel 0.75 x 1.20 M
ITEM CODE: 1530 8402 x
Weight: 36.50 kg
Frami Universal Panel 0.75 x 1.50 M
ITEM CODE: 1530 8407 x
Weight: 45.70 kg
Frami Universal Panel
¾ Used as a formwork panel for column only.
COMPONENTS LIST
40
LARSEN & TOUBRO LIMITED
Frami Corner Connector
FCCE
ITEM CODE: 1530 8446 x
Weight: 0.50 kg
Frami Corner Connector ¾ Used to connect adjacent Frami panels at corners. Frami Plywood Support 21 MM
ITEM CODE: 1530 8474 x
Weight: 2.10 kg
Frami Plywood Support
¾ Fixed with the Frami panel using Frami clip to adjust the required length of the panel. Frami Clip
ITEM CODE: 1530 8434 x
Weight: 0.30 kg
Frami Clip
¾ Used to connect the Frami ply wood support with Frami panel and Frami flat tie rod.
COMPONENTS LIST
41
LARSEN & TOUBRO LIMITED Frami Aligning Clamp
FCCE ITEM CODE: 1530 8435 x
Weight: 3.00 kg
Frami Aligning Clamp
¾ Used for aligning the panels and they are fixed with Frami panel. Frami Lifting Hook
ITEM CODE: 1530 8443 x
Weight: 6.50 kg
Frami Lifting Hook
¾ Used for carne handling and they are fixed at the top of the Frami panel. Frami Universal Waling 0.70 M
ITEM CODE: 1530 8439 x
Weight: 3.70 kg
Frami Universal Waling 1.25 M
ITEM CODE: 1530 8440 x
Weight: 6.30 kg
Frami Universal Waling
¾ Used at the panel joints in the vertical direction with wedge clamp.
COMPONENTS LIST
42
LARSEN & TOUBRO LIMITED
FCCE
Frami Inside Corner 1.20 M
ITEM CODE: 1530 8421 x
Weight: 19.50 kg
Frami Inside Corner 1.50 M
ITEM CODE: 1530 8422 x
Weight: 24.50 kg
Frami Inside Corner
¾ Used to form inside corner. Frami Outside Corner 1.20 M
ITEM CODE: 1530 8459 x
Weight: 11.00 kg
Frami Outside Corner 1.50 M
ITEM CODE: 1530 8460 x
Weight: 12.90 kg
Frami Outside Corner
¾ Used to form outside corner. Frami Hinged Inside Corner 1.20 M
ITEM CODE: 1530 8425 x
Weight: 36.00 kg
Frami Hinged Inside Corner 1.50 M
ITEM CODE: 1530 8426 x
Weight: 43.00 kg
Frami Hinged Inside Corner
¾ Used to form inside corner at any angle of inclination. COMPONENTS LIST
43
LARSEN & TOUBRO LIMITED
FCCE
Frami Hinged Outside Corner 1.20 M
ITEM CODE: 1530 8429 x
Weight: 13.00 kg
Frami Hinged Outside Corner 1.50 M
ITEM CODE: 1530 8430 x
Weight: 15.00 kg
Frami Hinged Outside Corner
¾ Used to form outside corner at any angle of inclination. Super Plate 15
ITEM CODE: 1530 1966 x
Weight: 0.90 kg
Super Plate
¾ Used as a bearing plate for tightening of tie rod . Frami Clamp
ITEM CODE: 1530 8433 x
Weight: 1.10 kg
Frami Clamp
¾ Used to connect the Frami panels together.
COMPONENTS LIST
44
LARSEN & TOUBRO LIMITED Frami Adjustable Clamp
FCCE ITEM CODE: 1530 8436 x
Weight: 3.70 kg
Frami Adjustable Clamp
¾ Used to adjust the gap between the panels and they are fixed in the horizontal direction of the panels. Frami Wedge Clamp
ITEM CODE: 1530 8441 x
Weight: 1.00 kg
Frami Wedge Clamp
¾ Used to connect the Frami universal waling with the Frami panels. Frami Adjusting Strut 260
ITEM CODE: 1530 8437 x
Weight: 15.50 kg
Frami Adjusting Strut
¾ Used to align the panels in line and verticality.
COMPONENTS LIST
45
LARSEN & TOUBRO LIMITED
Frami Bracket 60
FCCE
ITEM CODE: 1530 8442 x
Weight: 6.00 kg
Frami Bracket
¾ Used as a working platform and they are mounted at the top of the Frami panel Frami Adjustment Frame
ITEM CODE: 1530 8451 x
Weight: 13.00 kg
Frami Adjustment Frame
¾ Used for aligning the panels and they are connected with the Frami panel. Frami Foundation Clamp
ITEM CODE: 1530 8452 x
Weight: 1.80 kg
Frami Foundation Clamp
¾ Used for tieing purpose in foundation and they are fixed at the bottom of the Frami Panel with perforated tape.
COMPONENTS LIST
46
LARSEN & TOUBRO LIMITED Frami Anchoring Bracket
FCCE ITEM CODE: 1530 8453 x
Weight: 0.60 kg
Frami Anchoring Bracket
¾ Used for fixing the tie rod on top of the Frami panels Frami Flat Tie rod 50
ITEM CODE: 1530 8454 x
Weight: 1.50 kg
Frami Flat Tie rod 80
ITEM CODE: 1530 8455 x
Weight: 2.20 kg
Frami Flat Tie rod
¾ Used to maintain the thickness of the wall and they are fixed at panel top with Frami clip. Frami Transport Bracket
ITEM CODE: 1530 8456 x
Weight: 5.00 kg
Frami Transport Bracket
¾ Used to transport / shift panels. Frami Perforated Tape 50x1.5 M 25 LFM
ITEM CODE: 1530 8457 x
Weight: 0.55 kg
Frami Perforated Tape
¾ Used as a tie at the bottom of the foundation at panel joints.
COMPONENTS LIST
47
LARSEN & TOUBRO LIMITED
FCCE
Frami Closure Plate (1.2)
ITEM CODE: 1530 8467 x
Weight: 9.70 kg
Frami Closure Plate (1.5)
ITEM CODE: 1530 8468 x
Weight:12.10 kg
Frami Closure Plate
¾ Used for lapping. Tie Rod 15.0, 250 lg.
ITEM CODE: 1530 8470 x
Weight: 0.35 kg
Tie Rod 15.0, 500 lg.
ITEM CODE: 1530 8471 x
Weight: 0.70 kg
Tie Rod 15.0, 750 lg.
ITEM CODE: 1530 8472 x
Weight: 1.04 kg
Tie Rod 15.0, 1000 lg.
ITEM CODE: 1530 8473 x
Weight: 1.39 kg
Tie Rod 15.0, 1500 lg.
ITEM CODE: 1530 8474 x
Weight: 2.09 kg
Tie Rod 15.0, 2000 lg.
ITEM CODE: 1530 8475 x
Weight: 2.78 kg
Tie Rod 15.0, 2500 lg.
ITEM CODE: 1530 8476 x
Weight: 3.48 kg
Tie Rod 15.0, 3000 lg.
ITEM CODE: 1530 8477 x
Weight: 4.17 kg
Tie rod
¾ Used for tieing purpose.
COMPONENTS LIST
48
LARSEN & TOUBRO LIMITED
FCCE
CLIMBING FORMWORK Climbing formwork makes it possible to use the technical advantages of a large area formwork at any height – with the same degree of safety as on the ground. CLIMBING FORMWORK 150 A Here the brackets and wall formwork are to be handled separately by crane or a suitable lifting device. CLIMBING BRACKET 150 F It can be rolled 500 mm far back, providing considerable room between the concrete and the element. The row of wedge slits is used to press against the preceding pouring section at a very high pressure. This guarantees clean and tight joints. CLIMBING FORMWORK MF • The climbing formwork MF can be adjusted to work with an angle of inclination of upto ± 15˚. • Automatic climbing is also possible, as the climbing formwork MF can be connected directly to SKE automatic climbers • Other features include sturdy design, large shiftable units, wide platforms, and quick, safe suspension system • All round platform system rules out risky working • Can withstand the maximum load of 50 kN.
COMPONENTS LIST
49
LARSEN & TOUBRO LIMITED
FCCE
AUTOMATIC CLIMBING FORMWORK SKE The climbing formwork 150 F and MF 240 is equipped with a special automatic climber that enables it to climb automatically. Unhampered by weather conditions and independent of a crane this method eliminates waiting time required for each work sequence while affording a maximum of safety. Features include • Very varied combinations are possible • Optimally dimensioned formwork units • Formwork is safely anchored to concrete at all times • Simple system of working platforms • Any desired concrete surface is possible
Climbing Bracket 150A
ITEM CODE: 1522 3070 x
Weight : 55.60 kg
Climbing Bracket 150A
¾ Fixed with RCC wall for further lifts and mounted with the help of stop anchor and anchor cone.
COMPONENTS LIST
50
LARSEN & TOUBRO LIMITED
Climbing Bracket 80A
FCCE
ITEM CODE: 1522 3080 x
Weight : 26.54 kg
Climbing Bracket 80A
¾ Used as a suspended platform for finishing purpose and to be fitted with 150A climbing form work.
Climbing Bracket 150F
ITEM CODE: 1522 3090 x
Weight : 88.85 kg
Climbing Bracket 150F
¾ Used as a working platform and the shutter panels are mounted on the brackets. Suspended Platform 150F
ITEM CODE: 1522 3120 x
Weight : 37.92 kg
Suspended Platform 150F
¾ Used as a suspended platform for finishing purpose and to be fitted with 150F climbing form work. COMPONENTS LIST
51
LARSEN & TOUBRO LIMITED
Scissor Action Spindle
FCCE
ITEM CODE: 1522 3110 x
Weight : 52.13 kg
Scissor Action Spindle
¾ Used for role back and alignment of shutters and it is fixed with vertical waler and climbing bracket Climbing Cone 18.0
ITEM CODE: 1522 3150 x
Weight : 1.14 kg
Climbing Cone
¾ This is threaded with stop anchor 18.0 and used for fixing the climbing bracket. Handrail Post 1.20 M
ITEM CODE: 1517 0024 x
Weight : 9.82 kg
Handrail Post
¾ Used as a vertical member for hand railing.
COMPONENTS LIST
52
LARSEN & TOUBRO LIMITED Vertical Waling
FCCE ITEM CODE: 1522 3100 x
Weight : 87.10 kg
Vertical Waling
¾ Used as a supporting member for the panels.
Anchor Cone 18.0
ITEM CODE: 1522 7070 x
Weight : 0.58 kg
Anchor Cone
¾ Used for fixing the climbing bracket.
Anchor Cone Spanner DK (Tool)
ITEM CODE: 1522 3160 x
Weight : 0.43 kg
Anchor Cone Spanner DK (Tool) ¾ Used to remove the anchor cone from the concrete.
COMPONENTS LIST
53
LARSEN & TOUBRO LIMITED
Stop Anchor 18.0
FCCE
ITEM CODE: 3847 3140 x
Weight : 1.24 kg
Stop Anchor ¾ Fixed with shutter for anchoring purpose for future lifts.
Anchor Cone Sleeve (PVC)
ITEM CODE: 3847 0007 x
Weight : 0.02 kg
Anchor Cone Sleeve (PVC)
¾ Used to protect and easy removal of anchor cone from concrete.
COMPONENTS LIST
54
LARSEN & TOUBRO LIMITED
FCCE
COMPONENTS OF MF 240 Main Horizontal Profile MF with Handrail
ITEM CODE: 153206511 x
Weight : 82.00 kg
Main Horizontal Profile MF with Handrail
¾ Used as a horizontal member of MF Bracket. Vertical Profile MF 75
ITEM CODE: 153206521 x
Weight : 40.00 kg
Vertical Profile MF 75
¾ Used as a vertical member of the bracket and they are connected with horizontal profile and pressure strut.. Pressure Strut MF Long
ITEM CODE: 153206531 x
Weight : 24.00 kg
Pressure Strut MF Long
¾ They are connected with the horizontal and vertical profile. Pressure Strut MF Short
ITEM CODE: 153206541 x
Weight : 15.00 kg
Pressure Strut MF Short ¾ They are connected with the horizontal and vertical profile.
COMPONENTS LIST
55
LARSEN & TOUBRO LIMITED
FCCE
FOLDING PLATFORM K FEATURES 1. Very high loadability up to 600 kg / m2
2. Support surface for wall formwork of up to 5.5 m height. 3. Generous platform width – 1.8m. 4. Enough space for supporting a wall formwork. 5. Acts as a large rooftop fall barrier and as extra storage space on the site. Folding Bracket K
ITEM CODE: 1536 0441 x
Weight: 54.92 kg
Folding Bracket K
¾ Used as a bracket for working platform and can be folded. Suspended Platform 120 -3.30 M
ITEM CODE: 1536 0411 x
Weight: 10.84 kg
Suspended Platform
¾ Fixed with shutter for anchoring purpose.
COMPONENTS LIST
56
LARSEN & TOUBRO LIMITED
Adapter K
FCCE
ITEM CODE: 1536 0451 x
Weight: 6.87 kg
Adapter K
¾ For fixing the alignment prop with bracket and waler.
COMPONENTS LIST
57
LARSEN & TOUBRO LIMITED
FCCE
TABLE FORM WORK FEATURES 1. High labour productivity 2. Less number of prop required in relation to area. 3. Less number of components and skilled manpower. 4. Faster cycle time. 5. High quality surface finish. Table Head 30
ITEM CODE: 1540 60783 x
Weight: 18.68 kg
Table Head 30
¾ Used to connect the secondary member and the prop. 2 Nos. of primary beam can be placed.
Connection unit DF
ITEM CODE: 1540 60823 x
Weight: 0.56 kg
Connection unit DF
¾ Used a connection unit to connect the table head and secondary beam.
COMPONENTS LIST
58
LARSEN & TOUBRO LIMITED
Connection unit DF 20/30
FCCE
ITEM CODE: 1540 60843 x
Weight: 0.18 kg
Connection unit DF 20/30
¾ Used a connection unit to connect the table head and secondary beam. Table Head 20
ITEM CODE: 1540 60851 x
Weight: 15.53 kg
Table Head 20 ¾ Used to connect the secondary member and the prop. Only one number of primary beam can be placed. Spring Cotter 6mm
ITEM CODE: 153202042 x
Weight: 0.06 kg
Spring cotter 6mm ¾ Used to prevent the slippage of pins. Lifting Extension Bracket DF 1T
ITEM CODE: 154060683 x
Weight: 237.68 kg
Lifting Extension Bracket DF 1 T
¾ Used for vertical shifting of tables with crane from one floor to another. COMPONENTS LIST
59
LARSEN & TOUBRO LIMITED
FCCE
Transport Fork DF 1T / 0.9M
ITEM CODE: 154060691 x
Weight: 239.38 kg
Transport Fork DF 1T / 1.3M
ITEM CODE: 154060701 x
Weight: 257.29kg
Transport Fork DF 1T / 2.0M
ITEM CODE: 154060711 x
Weight: 293.20kg
Transport Pork DF
¾ Used for vertical shifting of tables with crane from one floor to another.
Hollow I 160 Aluminium Beam 2400 Long with End PVC cap
ITEM CODE: 154102398 x
Weight: 12.70 kg
Hollow I 160 Aluminium beam 2400 Lg. ¾ Used as primary and secondary member. Beam connector
ITEM CODE: 1540 7001 x
Weight: 0.13 kg
Beam connector
¾ Used to connect the primary and secondary aluminium beams.
COMPONENTS LIST
60
LARSEN & TOUBRO LIMITED
FCCE
Pallet Truck hydraulic - Manual
ITEM CODE: 1125 0000 0
Weight: 200 kg
Pallet Truck hydraulic - Electrical
ITEM CODE: 1125 0100 0
Weight: 200 kg
Pallet truck
¾ Used for horizontal shifting and proper positioning of table form.
COMPONENTS LIST
61
