Kandle Oilfield Products Catalog (Drilling)

®

KANDLE OILFIELD PRODUCTS, INC.

®

KANDLE OILFIELD PRODUCTS, INC. 14019 Interdrive East Houston, Texas 77032 USA Tel: 713-694-8671 Fax: 713-694-3214 email: [email protected] Internet: www. www.kop.com kop.com

LOB 21, Suite 21G22 Jebel Ali Freezone Dubai, UAE Tel: 971-4-8818301/8818302 Fax: 971-4-8818004 E-mail: [email protected]

Established over two decades ago, KANDLE OILFIELD PRODUCTS, INC. is a manufacturer of drilling equipment replacement replacement parts. These high quality parts have been recognized, accepted and specified by both Domestic Domestic and International Drilling Contractors Contractors and Oil Companies. In addition to manufacturing replacement parts for mud pumps, drawworks and swivels swivels,, KANDLE OILFIELD PRODUCTS, INC. is the source for both the OEM design and the TWO PIECE “L” SHAPED FLUID END ASSEMBLIES AND PARTS for the major manufacturers of 1300,1600 and 2200 horsepower mud pumps. KANDLE OILFIELD PRODUCTS, INC. has developed and implemented a quality system that is fully compliant with the American National Standard ANSI/ISO/ASQ Q9001-2008 (ISO 9001:2008). Compliance with this internationally recognized standard better enables KANDLE OILFIELD PRODUCTS, INC. to meet customer requirements and relevant standards. Manufactured in the U. S. A. on state of the art CNC machinery, KANDLE OILFIELD PRODUCTS, INC. guarantees the complete interchangeability of its parts with the Original Equipment Manufacturer (OEM). The warranty extended by KANDLE OIFIELD PRODUCTS, INC. meets or exceeds the warranties offered by the same.

The goal of KANDLE OILFIELD PRODUCTS, INC. is to offer the drilling industry a high-quality, competitively competitiv ely priced alternative to the original equipment supplier. KANDLE OILFIELD PRODUCTS, INC. looks forward to the opportunity to work with you in the future on your replacement parts requirements.

    

     

7039

              24 December 2009

            

       9 December 2012

        

   of                  &                    

    Issued By:  

  24  December 2009 Issue  Date: 

        ill          

®

KANDLE OILFIELD PRODUCTS, INC. 14019 Interdrive East Houston, Texas 77032 USA Tel: 713-694-8671 Fax: 713-694-3214 email: [email protected] Internet: www. www.kop.com kop.com

LOB 21, Suite 21G22 Jebel Ali Freezone Dubai, UAE Tel: 971-4-8818301/8818302 Fax: 971-4-8818004 E-mail: [email protected]

Established over two decades ago, KANDLE OILFIELD PRODUCTS, INC. is a manufacturer of drilling equipment replacement replacement parts. These high quality parts have been recognized, accepted and specified by both Domestic Domestic and International Drilling Contractors Contractors and Oil Companies. In addition to manufacturing replacement parts for mud pumps, drawworks and swivels swivels,, KANDLE OILFIELD PRODUCTS, INC. is the source for both the OEM design and the TWO PIECE “L” SHAPED FLUID END ASSEMBLIES AND PARTS for the major manufacturers of 1300,1600 and 2200 horsepower mud pumps. KANDLE OILFIELD PRODUCTS, INC. has developed and implemented a quality system that is fully compliant with the American National Standard ANSI/ISO/ASQ Q9001-2008 (ISO 9001:2008). Compliance with this internationally recognized standard better enables KANDLE OILFIELD PRODUCTS, INC. to meet customer requirements and relevant standards. Manufactured in the U. S. A. on state of the art CNC machinery, KANDLE OILFIELD PRODUCTS, INC. guarantees the complete interchangeability of its parts with the Original Equipment Manufacturer (OEM). The warranty extended by KANDLE OIFIELD PRODUCTS, INC. meets or exceeds the warranties offered by the same.

The goal of KANDLE OILFIELD PRODUCTS, INC. is to offer the drilling industry a high-quality, competitively competitiv ely priced alternative to the original equipment supplier. KANDLE OILFIELD PRODUCTS, INC. looks forward to the opportunity to work with you in the future on your replacement parts requirements.

    

     

7039

              24 December 2009

            

       9 December 2012

        

   of                  &                    

    Issued By:  

  24  December 2009 Issue  Date: 

        ill          

®


PRODUCT LINE* KOP is an independent* manufacturer of replacement parts for the following: Two Piece “L” Shaped Fluid End Assemblies National Triplex Mud Pumps Suction Line Dampener Swivels Drawworks Oilwell Triplex Mud Pumps Swivels Drawworks Continental-Emsco Triplex Mud Pumps Strainer Assembly Swivels Drawworks Gardner-Denver Triplex Mud Pumps Swivels Ideco Triplex Mud Pumps Swivels Triplex T riplex Mud Pump Studs

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to to the source, sponsorship, or quality quality of the parts manufactured manufactured by KOP. KOP. The original manufacturers named above and throughout this catalog do no t sponsor, promote, warranty or endorse KOP’s products.

1

®

TWO PIECE “L” SHAPED* FLUID END ASSEMBLIES


Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Description

New Style 12P160

Old Style 12P160

10P130

Complete Assembly Threaded Flange Screw Gland Plug Assembly w/Guide & Bushing Valve Guide Valve Guide Bushing Valve Guide Screw Valve Cover Stud w/Nut Power End Stud w/Nut Liner Retainer Capscrew Liner Retainer Flange Liner Retainer Nut Suction Module Stud w/Nut Suction Module (Studded) Discharge Module (Studded) Dowel Pin Wear Plate Valve Cover Plug Seal Module & Wear Plate Seal Piston Rod Sub Rod Rod Clamp w/Spray System

8476-4A 4476 4597 4676-6A 4776 4700-I 4016-98 4015-54 4015-95 4017-65 6476 6576 4018-17 8476-6 8476-5 8488-5 8476-3 P-119 2988 1286-32 1286-1 1286-CW

8476-A 4476 4597 4676-2A 4776 4700-I 4016-98 4015-54 4015-95 4017-65 6476 6576 4018-17 8476-2 8476-1 8488-5 8476-3 P-107 2988 1286-32 1286-1 1286-CW

8467-A 4467 4567 4667-A 4760-3 4700-I 4016-98 4015-5 4015-96 4017-8 6495 6595 4017-1 8467-2 8467-1 8488-5 8467-3 P-128 2988 1287-32 1287-1 1287-CW

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. “Southwest” is a registerd t rademark of Southwest Oileld Products, Inc. National is a registered trademark of National/Oilwell. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

2

®



Item Description 1 2 3 4 5 6 7 8 9 10 11 12 13

Complete Assembly Discharge Module Suction Module Screw Gland Threaded Flange Wear Plate Plug Assembly w/Guide & Bushing Liner Retainer Flange Liner Retainer Nut Module Gasket Valve Cover Plug Seal Valve Guide Bushing Valve Guide Valve Cover Stud w/Nut

Oilwell A1400-PT A1700-PT


8488-1A 8488-1 8488-2 4575 4475 8488-4

8487-A 8488-1 8488-2 4575 4475 8488-4

4675-1A 6488-1 6588-1 2988 P-129 4700-I 4775 4015-2

4675-1A 6488-1 6591 2988 P-129 4700-I 4775 4015-2

Item Description 14 15 16 17 18 19 20 21

Power End Stud w/Nut Liner Retainer Capscrew Suction Module Stud w/Nut Wear Plate Gasket Liner Retainer Set Screw Dowel Pin Discharge Manifold Stud Valve Guide Screw Piston Rod Sub Rod Piston Rod Connecting Stud Rod Clamp w/Spray System



4016-96 4017-4 4016-97

4016-96 4017-4 4016-97

2974-I 8488-7 8488-5 4016-3 4018-88 1290-25 1290-1 1290-2

2974-I 8488-7 8488-5 4016-3 4018-88 1290-25 1290-1 1290-2

1290-CW

1290-CW

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are s olely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Oilwell is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

3

®


KANDLE OILFIELD PRODUCTS, INC. Item Description 1 2 3 4 5 6 7 8 9

Complete Assembly Threaded Flange Liner Wear Plate Module and Wear Plate Gasket Screw Gland Plug Assembly w/Guide & Bushing Plug Seal Valve Guide Valve Guide Bushing Valve Guide Stud w/Nut

Emsco FA/FB-1300 FA/FB-1600

Item Description

Emsco FA/FB-1300 FA/FB-1600

8490-2A 4475 8490-3 2988

10 11 12 13 14 15 16 17 18 19 20

4015-2 4016-9 4017-36 6490-3 8422-3 6590-1 4016-97 8490-2 8490-1 8488-5 4017-46

4575 4675-2A P-129 4775-2 4700-I 4016-99

Valve Cover Stud w/Nut Power End Stud w/Nut Liner Retainer Capscrew Liner Retainer Flange Liner Retainer Pilot Ring Liner Retainer Nut Suction Module Stud w/Nut Suction Module (Studded) Discharge Module (Studded) Dowel Pin Discharge Manifold Stud w/Nut

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, s ponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

4

®

TWO PIECE “L” SHAPED FLUID END ASSEMBLIES*


Item Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Complete Assembly Wear Plate Wear Plate Gasket Threaded Flange Screw Gland Plug Assembly w/Guide & Bushing Valve Cover Plug Seal Valve Guide Valve Guide Bushing Valve Guide Screw Valve Cover Stud w/Nut Power End Stud w/Nut Liner Retainer Stud Liner Retainer Flange Suction Module Stud w/Nut

Gardner Denver® PZ 7/8/9

Gardner Denver® PZ 10/11

8475-1A 8477-3 2930-08 4475 4575 4675-1A

8477-A 8477-3 2930-08 4475 4575 4675-1A

P-129 4775R 4700-I 4018-88 4015-2 4017-56 4016-14 8475-3 4016-97

P-129 4775R 4700-I 4016-99 4015-2 4018-35 4018-34 6477 4016-97

Item Description

Gardner Denver® PZ 7/8/9

Gardner Denver® PZ 10/11

15

4017-77

4017-77

8475-2

8477-2

8475-1

8477-1

8488-5 2988 4017-5 6278-25 6288-1 1290-2

8488-5 2988 4017-5 6278-25 6279-1 1290-2

1248-CW

1277-CW

16 17 18 19 20

Suction Manifold Capscrew (not shown) Suction Module (Studded) Discharge Module (Studded) Dowel Pin Module Gasket Discharge Manifold Stud Piston Rod Sub Rod Piston Rod Connecting Stud Rod Clamp w/Spray System

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Gardner-Denver ® is a registered trademark of Gardner-Denver ®. KOP is in no way afliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

5

®


KANDLE OILFIELD PRODUCTS, INC. Item 1 2 3 4 5 6 7 8 9

Description

Ideco T-1300/1600

Item Description

Ideco T-1300/1600

Complete Assembly

8407-7A

Threaded Flange Screw Gland Plug Assembly w/Guide & Bushing Valve Guide Valve Guide Bushing Valve Guide Screw Valve Cover Stud w/Nut Power End Stud w/Nut Discharge Manifold Stud w/Nut

4475 4575 4675-2A

10 11 12 13 14 15 16 17 18 19

6407 6507 4016-97 8407-11 8407-7 8488-5 8407-10 P-129 2988 4018-98

4775-2 4700-I 4016-99 4015-2 4018-68 4017-50

Liner Retainer Flange Liner Retainer Nut Suction Module Stud Suction Module (Studded) Discharge Module (Studded) Dowel Pin Wear Plate Valve Cover Plug Seal Module & Wear Plate Seal Wear Plate Capscrew

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Ideco is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

6

®

VALVE COVER/PLUG CONVERSION KITS*


National 12P160 Kit

National 8/9/10P Kit

Oilwell A1100/1400/ 1700 PT Kit

Complete Kit

4476A

Description Screw Gland 4597 Threaded Flange 4476 Adapter Ring 4676-1 Plug Assembly w/Guide & Bushing 4676-2A Valve Cover Stud w/Nut 4015-54 Valve Cover Plug Seal P-107

Complete Kit

4467A

4475-3A

4567 4467 4667-1 4667A 4015-5 P-128

4575 4475 --4675-3A 4015-2 P-129

Gardner Denver® PZ10/PZ11 Kit

Gardner Denver® PZ8/PZ9 Kit

4477-1A

4477-A

4567 4477-1 4677-1 4777R 4700-IU 4015-92A P-113 4016-99

4577 4477 4677 4777R 4700-IU 4015-92A P-177 4016-99

Description

Screw Gland Threaded Flange Plug Assembly w/Guide & Bushing Valve Guide Valve Guide Insert Valve Cover Stud w/Nut Valve Cover Plug Seal Valve Guide Stud w/Nut

®

WEAR PLATE INSTALLATION*


Description

Gardner Denver® PZ8/9/10/11

Wear Plate

8477-4

Gasket

2974-11

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. National and Oilwell are registered trademarks of National/Oilwell. Gardner-Denver ® is a registered trademark of Gardner-Denver ®. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

7

®


NATIONAL TRIPLEX MUD PUMPS*

12P160 Description

Part No.

Description

Part No.

Discharge Module, Studded Suction Module, Studded Main Bearing Cage Crosshead, R.H. & Center Int. Rod Oil Shield Crosshead Liner Crosshead Pin Intermediate Rod Piston Rod Clamp Crosshead, Left Hand Liner Spray Manifold Valve Guide Holder Valve Guide Insert Sub Rod Piston Rod Liner Bushing Liner Clamp Wedge Adj. Screw Washer Valve Cover Seal Retainer

1292240 1292243 1292011 1292015 1292016 1292017 1292028 1292083 1292085 1292090 1292120 1292140 1292141 1292146 1292147 1292165 1292166 1292171 1292172 1292174

Back Up Ring Threaded Ring Wedge Adj. Screw Wedge Retaining Spring Int. Rod Oil Wiper Int. Rod Baffle Discharge Strainer Assy, 6” Flange Discharge Strainer Assy, 5” Flange Discharge Connector Discharge Connector Adapter Suction Module & Wear Plate Seal Discharge Spacer Seal Discharge Spacer, Studded Wear Plate Locking Wedge Assembly Valve Cover Gasket Suction Manifold Seal Rectangular Packing Rectangular Packing Wedge Adj. Screw Nut

1292175 1292176 1292178 1292181 1292182 1292194 1292215 1292225 1292252 1292253 1292257 1292258 1292262 1292266 1292268 1540127 1540851 2410031-433 2410031-437 6300182

Description

Part No.

Description

Part No.

Discharge Module, Studded Suction Module, Studded Int. Rod Oil Wiper Crosshead, R.H. & Center Crosshead Liner Crosshead Pin Intermediate Rod Piston Rod Clamp Crosshead, Left Hand Liner Bushing Liner Clamp Seal Retainer Back Up Ring Wedge Adj. Screw Wedge Retaining Spring Int. Rod Baffle Int. Rod Shield Valve Cover Int. Rod Oil Wiper

1290335 1290338 1283099 1290015 1290017 1290028 1290083 1290085 1290090 1290165 1290166 1290174 1290175 1290178 1290181 1290194 1290249 1290307 1283099

Threaded Ring Wedge Adj. Screw Washer Liner Spray Manifold Discharge Connector Discharge Connector Adapter Suction Module & Wear Plate Seal Discharge Spacer Seal Sub Rod Piston Rod Discharge Spacer, Studded Wear Plate Valve Guide Insert Holder Valve Guide Insert Valve Cover Gasket Suction Manifold Seal Rectangular Packing Rectangular Packing Locking Wedge Assembly Wedge Adj. Screw Nut

1290308 1290315 1290320 1290342 1290343 1290344 1290345 1290346 1290347 1290348 1290357 1292140 1292141 1540126 1590051 2410031-348 2410031-427 1290376 6300160

10P130

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. National is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

8

®



9P100 Description

Part No.

Description

Part No.

Discharge Module, Studded Suction Module, Studded Seal Retainer Back Up Ring Wedge Adj. Screw Wedge Retaining Spring Valve Cover Threaded Ring Wedge Adj. Screw Washer Discharge Connector Discharge Connector Adapter Suction Module & Wear Plate Seal Discharge Spacer Seal Wear Plate Crosshead, R.H. & Center Crosshead Liner Crosshead Pin Int. Rod Oil Shield

1293240 1290338 1290174 1290175 1290178 1290181 1290307 1290308 1290315 1290342 1290343 1290344 1290345 1290357 1293015 1293017 1293028 1293016

Piston Rod Clamp Crosshead, L.H. Sub Rod Piston Rod Liner Bushing Liner Clamp Int. Rod Wiper Seal Liner Spray Manifold Int. Rod Baffle Discharge Spacer, Studded Valve Guide Insert Holder Valve Guide Insert Valve Cover Gasket Suction Manifold Seal Rectangular Packing Rectangular Packing Locking Wedge Assembly Wedge Adj. Screw Nut

1293085 1293090 1293146 1293147 1293165 1293166 1293182 1293193 1293194 1293243 1292140 1292141 1540126 1590051 2410031-348 2410031-427 1290376 6300160

Description

Part No.

Description

Part No.

Discharge Module, Studded Suction Module, Studded Seal Retainer Back Up Ring Wedge Adj. Screw Wedge Retainer Spring Valve Cover Threaded Ring Wedge Adj. Screw Washer Discharge Connector Discharge Connector Adapter Suction Module & Wear Plate Seal Discharge Spacer Seal Wear Plate Crosshead, R.H. & Center Crosshead Liner Crosshead Pin Int. Rod Oil Shield

1291280 1290338 1290174 1290175 1290178 1290181 1290307 1290308 1290315 1290342 1290343 1290344 1290345 1290357 1291015 1291017 1291028 1291226

Piston Rod Clamp Crosshead, Left Hand Liner Bushing Liner Clamp Int. Rod Wiper Seal Liner Spray Manifold Int. Rod Baffle Sub Rod Piston Rod Discharge Spacer, Studded Valve Guide Insert Holder Valve Guide Insert Valve Cover Gasket Suction Manifold Seal Rectangular Packing Rectangular Packing Locking Wedge Assembly Wedge Adj. Screw Nut

1291085 1291090 1291165 1291166 1291182 1291190 1291194 1291276 1291277 1291286 1292140 1292141 1540126 1590051 2410031-348 2410031-427 1290376 6300160

8P80

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. National is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

9

®



Pump Model 14P220 Description

Part No.

Description

Part No.

Discharge Module, Studded Suction Module, Studded Valve Guide Holder Valve Guide Insert Int. Rod Baffle Intermediate Rod Piston Rod Clamp Sub Rod Piston Rod Liner Bushing Liner Clamp Valve Cover Valve Cover Gasket

1295601 1295604 1292140 1292141 1292194 1295083 1295085 1295146 1295147 1295165 1295166 1295172 1540163

Seal Retainer Back Up Ring Threaded Ring Discharge Connector Discharge Connector Adapter Module Seal Discharge Spacer Seal Wear Plate Suction Manifold Seal Rectangular Packing Rectangular Packing Discharge Spacer Studded Ring Joint Gasket

1295174 1295175 1295176 1295252 1295253 1295257 1295258 1295266 1540021 2410031-438 2410031-440 1295262 6907339-S

®


NATIONAL SUCTION LINE DAMPENER*

Pump Models: 8P80/9P100/10P130/12P160 Description

Part No.

Suction Line Dampener Diaphragm 1290195 Suction Line Dampener Spacer 1290196 Suction Line Dampener Cover 1290197 Suction Line Dampener Retainer 1290198 Suction Line Dampener Gasket 1290199 Check Valve 7500021 Sight Glass Plug 7815106 Rectangular Packing 2410031-024 Hx Hd Capscrew, 9/16” X 4” 7000361-11 Washer, 9/16” N, Type A 7621036


10

®


NATIONAL P-SERIES & N-SERIES SWIVELS* N Series Swivels

P-200/300/400/500/650 Description

Part No.

Description

N-47/69/815/1324 N-24/N-35

Cartridge Assembly Washpipe Packing Gooseneck Washpipe Holding Ring Spacer Assembly Middle Spacer Lower Spacer Holding Nut Packing Box Bumper Assembly Cartridge Assembly O-Ring

703429-G1U 703429-G3U 649351-XA 649355-A 649356 649358-A 649359 649360 649357 649361-A 607296-A 7817600-348

Cartridge Assembly Washpipe Washpipe Packing Washpipe Holding Spacer Packing Spacer Packing Spacer Packing Spacer Washpipe Holding Cap Washpipe Packing Box Bumper Assembly Cartridge Assembly O-Ring

623455-AA2S 624568-A 612984-A1 623454-B 613150 613151-A 623456 624565 623455-A 607296-A 627398

627394-AA2 627400-A 614196-A1 627396 614197 614198-A 627397 627395 627394-A 607296-A 627398

P-750 Power Swivel National P & N Series Gooseneck Connections Description

Part No.

Hose Connection Nut Hose Union Sleeve 4” Male Hose Union Sleeve 4” Female Hose Union Sleeve 3” Male Hose Union Sleeve 3” Female Gooseneck to Sleeve O-Ring Gooseneck to Hose Connection Nut O-Ring

626895 626901 626902 626903 626904 7817600-346 7817600-432

Description

Part No.

Cartridge Assembly Washpipe Packing Washpipe Holding Ring Spacer Assembly Middle Spacer Lower Spacer Holding Nut Packing Box Cartridge Assembly O-Ring

703978-G1U 703774-G3U 653055-A 653057 654648-A 654637 653050 654639 654649-A 7817600-359


11

®


NATIONAL DRAWWORKS* 1320-UE “K-54” Brake Parts

1625-UE “K-62B” Brake Parts Description

Part No.

Crank Link 619441-A Equalizer Pin 641149-A Key 33932 Gib Head Key 39440 Jam Anchor Bolt Nut 46530 Adjusting Nut Spring 46544 Key 46548 Brake Band Anchor Bolt 610350 Brake Band Anchor Pin 610351-S Key 610357 Crank 619442 Adjusting Nut 619444 Operating Pin 619445 Crank Pin 619446 Crank Pin 619447 Brake Band Operating Crank (L.H.) 619448 Brake Band Operating Crank (R.H.) 619449

Description

Part No.

Equalizer Brake Pin Assembly Gib Head Key Conn Brake Crank Link Brake Band Adjusting Nut Jam Anchor Bolt Nut Shaft Brake Bracket Shaft Brake Bracket Shaft Brake Lever Box Actuating Crank Brake Shaft Crank Key Actuating Crank Pin Shaft Brake Lever Pin Operating Crank Adjusting Nut Spring Eye Bolt Brake Band Anchor Pin Key Spring

622818-A 39440 46527 46529 46530 46531 46531-X 46532 46533 46534 46535 46536 46537 46538 46544 46545 46546-S 46550 49963

Operating Pin

610404

110-M & 110-UE “K-50” Brake Parts Description

Part No.

Equalizer Pin Assembly Brake Band Eye Bolt Clevis Pin Brake Crank Pin Rivet Brake Band Crank Brake Equalizer Spring Brake Band Crank Pin Brake Band Eye Bolt Left Hand Brake Bracket Right Hand Brake Bracket Eye Bolt Adjusting Nut Brake Band Crank Key Brake Lever Socket Key Brake Shaft Crank Key Brake Lever Shaft Crank Key Brake Shaft Crank Pin Brake Link Brake Lever Crank

626723-A 28760-S 39359 39360 39365 39366 39367 39371 39371-X 39375 39397 39440 39530 39531 39393 626098 626099


12

®


NATIONAL DRAWWORKS* Air & Water Connection Parts

80-B “K-46” Brake Parts

80, 110, 610,1320, & 1625 Drawworks

Description

Part No.

Description

Part No.

Equalizer Pin Assembly Brake Band Eye Bolt Clevis Pin Brake Crank Pin Rivet Brake Band Crank Brake Equalizer Bracket Brake Equalizer Spring Brake Band Crank Pin Brake Band Eye Bolt Brake Lever Crank Pin Left Hand Brake Bracket Right Hand Brake Bracket Brake Shaft Crank Eye Bolt Adjusting Nut Brake Shaft Crank Pin Brake Shaft Crank Key Gib Head Key Brake Shaft Crank Key Brake Lever Shaft Crank Key Brake Link Brake Lever Crank

623710-A 28760-S 39359 39360 39361 39365 39366 39367 39369 39371 39371-X 39373 39375 39393 39397 39440 39530 39531 626098 626099

Water Inlet Spear Body Gasket Large Bearing Spacer Small Bearing Spacer Oil Seal Oil Seal Seal Spacer

617547 612385 617539 617539-1 617552 617553 618438


13

®


OILWELL TRIPLEX MUD PUMPS*

A-850/1100/1400/1700PT Description

A-850PT

A-1100PT

A-1400PT

A-1700PT

Valve Guide Valve Cover Valve Cover Gasket Diaphragm Housing Diaphragm Gland Lantern Ring Crosshead Pin Crosshead Crosshead Guide (Upper) Extension Rod Line Adapter Nut Liner Adapter Wear Plate Liner Spacer Ring Liner Centering Sleeve Suction Manifold Gasket Crosshead Guide (Lower) Piston Rod Stud Liner Wear Plate Gasket Ext. Rod Wiper Seal Piston Rod Piston Rod Extension Piston Rod Clamp Valve Guide Bushing Liner Flushing Shield Valve Guide Capscrew Discharge Manifold O-Ring Discharge Manifold

10-300-004 10-300-005 10-300-011 10-300-020 10-300-021 10-300-022 10-303-014 10-303-073 10-303-009 10-300-142 10-303-092 10-300-183 10-300-184 10-300-185 10-303-091 10-300-201 10-303-097 10-305-203 20-100-008 20-100-015 20-150-123 20-150-125 20-150-132 20-200-004 20-460-668 75-632-234 99-609-345 10-303-130

10-300-004 10-300-005 10-300-011 10-300-020 10-300-021 10-300-022 10-303-014 10-303-073 10-303-009 10-300-142 10-303-092 10-300-183 10-300-184 10-300-185 10-303-091 10-300-201 10-303-097 10-305-203 20-100-008 20-100-015 20-150-123 20-150-125 20-150-132 20-200-004 20-460-668 75-632-234 99-609-345 10-303-175

10-300-004 10-300-005 10-300-011 10-300-020 10-300-021 10-300-022 10-300-131 10-300-132 10-300-141 10-300-142 10-300-182 10-300-183 10-300-184 10-300-185 10-300-186 10-300-201 10-300-233 10-305-203 20-100-008 20-100-015 20-150-123 20-150-125 20-150-132 20-200-004 20-240-668 75-632-234 99-609-345 10-300-340

10-300-004 10-300-005 10-300-011 10-300-020 10-300-021 10-300-022 10-300-131 10-300-132 10-300-141 10-300-142 10-300-182 10-300-183 10-300-184 10-300-185 10-300-186 10-300-201 10-300-233 10-305-203 20-100-008 20-100-015 20-150-123 20-150-125 20-150-132 20-200-004 20-460-668 75-632-234 99-609-345 10-300-267

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Oilwell is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

14

®


OILWELL PC-SERIES SWIVELS*

PC Series Swivels Description

PC100/150

PC225/300/425/500/650

Gooseneck Cartridge Assembly Washpipe Washpipe Packing Top Adapter Ring Spacer Ring Bottom Adapter Ring Lantern Ring Packing Adapter Ring Ring Nut Packing Housing Cartridge Assembly O-Ring

22-028-131 22-032-016 22-032-010 22-028-181 22-032-001 22-028-187 22-032-006 22-028-186 22-032-005 22-032-002 22-032-004 99-607-344

--22-035-012 22-034-019 22-034-017 22-025-169 22-034-013 22-034-014 22-034-015 22-034-016 22-025-160 22-025-166 99-607-427

®


OILWELL DRAWWORKS*

Stuffing Box Assembly Parts 760, 860, 2000 & 3000 Drawworks

Description

Part No.

Stuffing Box Spindle Stuffing Box Body Stuffing Box Packing Packing Spacer Stuffing Box Spring Packing Adapter Ring Stuffing Box Cap Lantern Ring Packing Set Lantern Ring Gland

06-114-514 06-038-195 06-038-196 06-038-197 06-038-198 06-038-199 06-038-200 06-114-515 06-027-725 06-027-728 06-014-571

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Oilwell is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

15

®

KANDLE OILFIELD PRODUCTS, INC. FC-2200

EMSCO TRIPLEX MUD PUMPS* FB-1300/1600

Description

Part No.

Description

Part No.

Studded Fluid End (Discharge) Studded Fluid End (Suction) Threaded Retainer Threaded Ring Valve Pot Cover Valve Guide w/Bushing Handler, Valve Pot Wear Plate Liner Thread Ring Liner Lock Retainer, Valve Guide

6323-0108-00 6323-0109-00 6323-0087-00 6323-0086-00 6323-0083-00 6323-0103-00 6323-0126-00 6323-0097-00 6323-0096-00 6323-0099-00 6323-0093-00

Fluid End, Studded Intermediate Rod Valve Pot Cover Discharge Manifold Valve Cover Seal Baffle Lower Valve Guide Bushing Piston Rod Clamp Liner End Cover Liner Lock Ring Lower Valve Guide Piston Rod Lock Bolt Cylinder Threaded Ring Cylinder Head Alignment Ring Cylinder Head Plug Wear Plate Liner Threaded Ring Liner Lock Cylinder Head Seal Liner Seal Stuffing Box Stuffing Box Lock Spring Stuffing Box Spring Upper Valve Guide Upper Valve Guide Retainer Upper Valve Guide Retainer Screw Ring Joint Gasket Discharge Manifold O-Ring Liner Lock Ring O-Ring Suction Manifold O-Ring Single Lip Oil Seal Double Lip Oil Seal Crosshead Crosshead Guide (Lower) Crosshead Pin Crosshead Guide (Upper)

6316-0357-00 6316-0028-00 6316-0039-00 6316-0043-00 6316-0092-00 6316-0093-00 6316-0096-00 6316-0107-11 6316-0164-00 6316-0333-00 6316-0354-00 6316-0359-00 6316-0360-00 6316-0361-00 6316-0362-00 6316-0363-00 6316-0364-00 6316-0365-00 6316-0366-00 6316-0367-00 6316-0369-00 6316-0373-00 6397-0544-00 6397-0546-00 6397-0548-00 6397-0575-00 6397-0603-00 7501-0051-00 7601-0661-11 7602-1600-25 7602-1600-44 7602-1600-61 7602-2131-47 7602-2132-76 6316-0022-00 6316-0181-00 6316-0087-00 6316-0182-00

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

16

®


EMSCO TRIPLEX MUD PUMPS*

F-800/1000 Description

F-800

F-1000

Fluid End Module, Studded Threaded Ring Crosshead Extension Rod Liner Cage Valve Pot Cover Cylinder Head Plug Baffle Piston Rod Clamp Piston Rod Valve Cover Seal Lower Valve Guide Lower Valve Guide Locking Clip Cylinder Head Liner End Cover Stuffing Box Spring Stuffing Box Lock Spring Stuffing Box Upper Valve Guide Upper Valve Guide Retainer Plate Lower Valve Guide Bushing Retainer Plate Screw Ring Joint Gasket Suction Manifold O-Ring Discharge Manifold O-Ring Single Lip Oil Seal Double Lip Oil Seal Liner Seal

6999-0086-02 6999-0089-00 6320-0041-00 6319-0026-00 6319-0027-00 6319-0031-00 6320-0028-00 6320-0072-00 6320-0030-00 6319-0076-00 6319-0087-00 6319-0089-00 6319-0090-00 6319-0121-00 6397-0564-00 6397-0565-00 6397-0560-00 6397-0575-00 6397-0603-00 6316-0096-00 7501-0051-00 7602-0661-11 7602-1600-61 7602-1610-46 7602-2131-97 7602-2132-74 7602-2200-32

6999-0086-02 6999-0089-00 6319-0020-00 6319-0026-00 6319-0027-00 6319-0031-00 6319-0070-00 6319-0071-10 6319-0075-00 6319-0076-00 6319-0087-00 6319-0089-00 6319-0090-00 6319-0121-00 6397-0539-00 6397-0540-00 6397-0543-00 6397-0575-00 6397-0603-00 6316-0096-00 7501-0051-00 7602-0661-11 7602-1600-61 7602-1610-46 7602-2132-05 7602-2132-75 7602-2200-32

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

17

®


EMSCO STRAINER ASSEMBLY*

F-800 Thru FB-1600 Discharge Strainer Housing Assembly Description

Part No.

Strainer Housing Assembly, 5” Outlet Strainer Housing Assembly, 6” Outlet Strainer Housing Body, 5” Outlet Strainer Housing Body, 6” Outlet Strainer Cap Strainer Strainer Gasket Ring Joint Gasket, 5” Outlet Ring Joint Gasket, 6” Outlet Stud 5” Flange Stud 6” Flange Stud Nut 5” Flange Stud Nut 6” Flange

6317-0039-00 6317-0099-00 6317-0049-00 6317-0097-00 6397-0291-00 6397-0293-01 7602-1600-40 7602-0661-11 7602-0660-05 7507-2201-00 7507-2743-00 7601-0630-17 7601-0630-28

®


EMSCO SWIVELS*

Emsco Swivels Description

LB-200/300

Packing Box Assembly Washpipe Washpipe Packing HP Washpipe Packing Top Packing Spacer Middle Packing Spacer Bottom Packing Spacer Upper Packing Spacer Packing Gland Housing Lower Gland Nut Upper Gland Nut Packing Box O-Ring

6597-0400-00 6597-0399-00 6504-0012-00 6504-0017-00 6597-0382-00 6597-0383-00 6597-0384-00 6597-0388-00 6597-0380-10 6597-0379-00 6597-0381-00 7602-1600-63

LB-400/500/650 6597-0394-00 6597-0396-00 6505-0007-00 6505-0016-00 6597-0382-00 6597-0383-00 6597-0384-00 6597-0388-00 6597-0380-00 6597-0379-00 6597-0381-00 7602-1600-63

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of t he original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to t he source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

18

®


EMSCO DRAWWORKS*

Emsco C-II & C-III “DB ” Stuffing Box Parts Description

Part No.

Stuffing Box Assembly Stuffing Box Body Stuffing Box Housing Front Bearing Rear Bearing Oil Seal C-2 Rotorseal

6212-0522-00 6212-0518-00 6296-7323-00 6296-6687-00 6296-6689-00 7602-2131-39 7602-2170-06

Emsco C-II & C-III Drum Brake Assembly Parts Description

Part No.

Pin Turnbuckle Rod End (Left Hand) Rod End (Right Hand) Equalizer Bar Pin Bell Crank Pivot Pin Bearing Dead End Pin Bearing Lock Nut (Left Hand) Lock Nut (Right Hand) Bushing Bearing

6201-0052-00 6212-0078-00 6212-0079-01 6212-0079-00 6212-0081-00 6212-0082-00 6212-0932-00 6212-0088-00 6212-0931-00 6212-1071-00 6212-1070-00 6212-0965-00 6212-0933-00

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

19

®


GARDNER-DENVER® TRIPLEX MUD PUMPS*

PZ-7/8/9/10/11 Description

PZ-7

PZ-8

PZ-9

PZ-10 & PZ-11

Fluid Cylinder Valve Cover Valve Cover Ring Valve Cover Lock Valve Guide Assembly Valve Guide Retainer Plate Valve Cover Gasket Valve Cover Gasket Retaining Ring Valve Guide Bushing Piston Rod-Clamp Type Extension Rod-Clamp Type Rod Clamp Oil Stop Head Seal Suction Manifold to Cylinder Gasket Discharge Manifold to Cylinder Gasket Liner to Cylinder Gasket Valve Guide Washer Valve Guide Capscrew Liner Clamp

205PZL029D 2011860 2011699 2011857 2011706 2011701 2011862 2011861 2007674 201PZG060 200PZG839 2012240 2011872 25G41 25AL35 25AT37 95W2 75AA178 1PV14

205PZL029D 2011860 2011699 2011857 2011706 2011701 2011862 2011861 2007674 1PZ183 1PO183 2012240 2011872 25G41 25AL35 25AT37 95W2 75AA178 1PV14

205PZL029D 2011860 2011699 2011857 2011706 2011701 2011862 2011861 2007674 1PZ183 PZ183 2012240 2011872 25G41 25AL35 25AT37 95W2 75AA178 1PV14

202PZL029B 200PZL147 200PZL387 200PZL587 200PZL483A 2011701 204PZL715 --2007674 200PZL060 200PZL839 200PZL092A 2011872 25G41 25AL35 25AT37 95W2 75AA178 200PZL455

®


GARDNER-DENVER® SWIVELS* SW-400/550 Description

Part No.

Washpipe Washpipe Packing Packing Ring Packing Box Top Spacer Grease Gland Middle Spacer Bottom Spacer Packing Box O-Ring

126946 185325 126961 185303 185304 185305 185306 185307 162810

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Gardner-Denver ® is a registered trademark of Gardner-Denver ®. KOP is in no way afliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

20

®


IDECO TRIPLEX MUD PUMPS*

T-500/800/1000/1300/1600 Description

T-500

T-800/1000

T-1300/1600

Fluid Cylinder (Less Studs & Nuts) Fluid Cylinder (Studded) Cylinder Head Plug (Top) Threaded Ring Threaded Plug Retainer Threaded Liner Retainer Cylinder Head Plug Lower Valve Guide Lower Valve Guide Retainer Upper Valve Guide Plug & Liner Seal Piston Rod Rod Clamp Crosshead Extension Rod

551-422-01 551-458 551-422-03 551-405-03 551-405-04 551-522-01 551-422-02 551-405-07 551-422-04 --BMT-1669-63-09 551-522-03 551-506-08 551-506-06

551-122-01 551-158 551-122-02 551-105-03 551-105-04 551-105-05 551-122-02 551-105-07 551-105-08 551-105-06 BMT-1669-63-08 551-105-13 551-106-08 551-106-06

Stripper Box Stripper Box Packing Lantern Ring Crosshead Upper & Lower X-Head Guide (New Style) Upper X-Head Guide (Old Style) Lower X-Head Guide (Old Style) Wrist Pin Discharge Manifold Discharge Manifold O-Ring Suction Manifold O-Ring Ring Joint Gasket

551-506-10 IP-806 551-506-14 ------------IO-548 IO-521 IG-258

551-422-01 551-458 551-422-03 551-405-03 551-405-04 551-405-05 551-422-02 551-405-07 551-422-04 --BMT-1669-63-09 551-405-13 551-406-08 551-306-06 (T-1000) 551-406-06 (T-800) 551-406-15 IP-805 551-306-08 551-306-01 551-306-30 551-306-02 551-306-03 551-306-04 551-305-02 IO-548 IO-521 IG-258

551-106-13 IP-804 551-106-12 551-106-01 551-106-30 551-106-02 551-106-03 551-106-04 551-105-11 IO-548 IO-507 IG-258

®


IDECO SWIVELS*

TL-120/200/300/400/500 Description

TL-120

TL-200

Gooseneck Washpipe Upper Packing Set Lower Packing Set Upper Cartridge Upper Packing Nut Lower Cartridge Lower Packing Nut

559-05 531-12 339-33 491-07 IP-166 IP-162 IP-177 IP-802 --531-14-01 559-10 531-13 559-23-02 531-23 -----

TL-300 TL-400 TL-500 491-06 491-07 IP-162 IP-801 491-20 491-10 491-27 491-11

491-06 491-07 IP-162 IP-801 491-20 491-10 491-27 491-11

491-06 491-26 IP-162 IP-801 491-20 491-10 491-27 491-11

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Ideco is a registered trademark of National/Oilwell. KOP is in no way afliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

21

®


TRIPLEX MUD PUMP STUDS*

TWO PIECE “L” SHAPED* TRIPLEX PUMP STUDS Part No.

Module

Size

National 12P160

Threaded Flange Stud w/ Nut Suction Module Stud w/Nut Power End Stud w/Nut Threaded Flange Stud w/Nut Suction Module Stud w/Nut Power End Stud w/Nut Threaded Flange Stud w/Nut Suction Module Stud w/Nut Power End Stud w/Nut Threaded Flange Stud w/Nut Suction Module Stud w/Nut Power End Stud w/Nut Threaded Flange Stud w/Nut Suction Module Stud w/Nut Power End Stud w/Nut

4015-54 4018-17 4015-95 4015-5 4018-19 4015-96 4015-2 4016-97 4016-96 4015-2 4016-97 4016-9 4015-2 4016-97 4018-68

National 10P130

Oilwell A-850/1100/1400/1700PT Continental Emsco FB-1300/1600 Ideco T-1300/1600

Qty. Per Pump 72 ea. 18 ea. 30 ea. 72 ea. 18 ea. 24 ea. 72 ea. 18 ea. 12 ea. 72 ea. 18 ea. 18 ea. 72 ea. 18 ea. 24 ea.

Size 1-1/2” X 10” 1-3/4” x 21-1/8” 1-3/8” x 7 ” 1-3/8” x 9-7/8” 1-1/2” x 19-1/8” 1-1/2” x 6-7/8” 1-1/4” x 9-3/8” 1-1/2” x 19-1/8” 1-3/4” x 11-3/4” 1-1/4” x 9-3/8” 1-1/2” x 19-1/8” 1-1/2” x 13” 1-1/4” x 9-3/8” 1-1/2” x 19-1/8” 1-1/2” x 12-3/4”

NATIONAL TRIPLEX PUMP STUDS Pump

Description

Part No.

Qty. Per Pump

Size

8P80

Valve Cover Ring Stud Valve Cover Ring Nut Discharge to Suction Module Stud Discharge to Suction Module Nut Liner Bushing Stud Liner Bushing Nut Discharge Module to Frame Stud Discharge Module to Frame Nut

2408019 6300220 2408034 6300241 2408025 6300120 2408026 6300180

72 ea. 72 ea. 18 ea. 18 ea. 18 ea. 18 ea. 24 ea. 24 ea.

1-3/8” x 7” 1-3/8” – 6 1-1/2”x19-1/8” 1-1/2” – 8 3/4” x 5” 3/4” – 10 1-1/8” x 5-3/4” 1-1/8” – 7

9P100


2408019 6300220 2408034 6300241 408018 6300160 2408030 6300200


1-3/8” x 7” 1-3/8” – 6 1-1/2” x 19-1/8” 1-1/2” – 8 1” x 5-7/8” 1” – 8 1-1/4” x 6” 1-1/4” – 7

10P130


2408019 6300220 2408034 6300241 2408018 6300160 2408020 6300240


1-3/8” x 7” 1-3/8” – 6 1-1/2” x 19-1/8” 1-1/2” – 8 1” x 5-7/8” 1” – 8 1-1/2” x 6-7/8” 1-1/2” – 6

12P160


2408027 6300240 2408033 6300281 2408028 6300180 2408029 6300220


1-1/2” x 7-7/8” 1-1/2” – 6 1-3/4” x 21-1/8” 1-3/4” – 8 1-1/8” x 6-3/8” 1-1/8” – 7 1-3/8” x 6-3/4” 1-3/8” – 6

OILWELL TRIPLEX PUMP STUDS Pump A-850/1100/1400/1700PT

Description

Part No.

Discharge Manifold Stud Discharge Manifold Nut Module to Frame Stud Module to Frame Nut

49-001-292 75-511-754 49-002-837 75-510-126

Qty. Per Pump 12 ea. 12 ea. 12 ea. 12 ea.

Size 1-3/8” x 4-1/2” 1-3/8” – 8 1-3/4” x 7-1/2” 1-3/4” – 8

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. National, Oilwell and Ideco are registered trademarks or National/Oilwell. Southwest is a registered trademark of Southwest Oileld Products, Inc. Emsco is a registered trademark of Continental-Emsco/ National/Oilwell. KOP is in no way afliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

22

®


TRIPLEX MUD PUMP STUDS*

EMSCO TRIPLEX PUMP STUDS Pump F-800/1000

FB-1300/1600

Description Discharge Manifold Stud Discharge Manifold Nut Threaded Ring Stud Threaded Ring Nut Module to Frame Stud Module to Frame Nut Cylinder Threaded Ring Stud Cylinder Threaded Ring Nut Discharge Manifold Stud Discharge Manifold Nut Module to Frame Stud Module to Frame Nut Liner Threaded Ring Stud Liner Threaded Ring Nut

Part No. 7507-2108-00 7601-0630-24 7507-2150-00 7601-0630-28 7507-2205-00 7601-0630-17 7507-2210-00 7601-0630-17 7507-2108-00 7601-0630-24 7507-2201-00 7601-0630-17 7507-2013-00 7601-0610-18

Qty. Per Pump 12 ea. 12 ea. 30 ea. 30 ea. 18 ea. 18 ea. 30 ea. 30 ea. 12 ea. 12 ea. 18 ea. 18 ea. 36 ea. 36 ea.

Size 1-1/4” x 9-1/2” 1-1/4” – 8 1-3/8” x 7-7/8” 1-3/8” – 8 1-1/2” x 6” 1-1/2” – 8 1-1/2” x 8-5/8” 1-1/2” – 8 1-1/4” x 9-1/2” 1-1/4” – 8 1-1/2” x 6-7/8” 1-1/2” – 8 1” x 9” 1” – 8

GARDNER-DENVER® TRIPLEX PUMP STUDS Pump PZ-7/8/9

PZ-10/11

Description Cylinder to Frame & Liner Clamp Stud Cylinder to Frame & Liner Clamp Nut Cylinder to Frame Stud Cylinder to Frame Nut Valve Cover Ring Stud Valve Cover Ring Nut Discharge Manifold Stud Discharge Manifold Nut Cylinder to Frame Stud (Long) Cylinder to Frame Nut Cylinder to Frame Stud (Short) Cylinder to Frame Nut Valve Cover Ring Stud Valve Cover Ring Nut Discharge Manifold Stud Discharge Manifold Nut

Part No. 79L188 50B36 79L73 50AQ30 79AL6 50B34 202PZL110 50B34 201PZL110 50B36 205PZL110 50B36 204PZL110 50B34 202PZL110 50B34

Qty. Per Pump 24 ea. 36 ea. 12 ea. 12 ea. 48 ea. 48 ea. 12 ea. 12 ea. 24 ea. 48 ea. 24 ea. 24 ea. 72 ea. 72 ea. 12 ea. 12 ea.

Size 1-1/4” x 8-3/4” 1-1/4” – 7 7/8” x 4-1/4” 7/8” – 9 1” x 5” 1” – 8 1” x 7-3/4” 1” – 8 1-1/4” x 10-1/2” 1-1/4” – 7 1-1/4” x 6-1/8” 1-1/4” – 7 1” x 6-1/4” 1” – 8 1” x 7-3/4” 1” – 8

Qty. Per Pump 24 ea. 12 ea. 48 ea. 84 ea. 24 ea. 12 ea. 48 ea. 84 ea.

Size 1-1/4” x 10” 1-1/4” x 9-3/4” 1-1/4” x 7-1/4” 1-1/4” – 8 1-1/2” x 12-3/8” 1-1/2” x 7-5/8” 1-1/2” x 9-1/4” 1-1/2” – 8

IDECO TRIPLEX PUMP STUDS Pump T-500/800/1000

T-1300/1600

Description Threaded Ring Stud (Liner Side) Discharge Manifold Stud Threaded Ring Stud Heavy Hex Nut for Studs Threaded Ring Stud (Liner Side) Discharge Manifold Stud Threaded Ring Stud Heavy Hex Nuts for Studs

Part No. 551-410-01 551-410-02 551-410-03 IN-416 551-110-01 551-110-02 551-110-03 IN-415

*Kandle Oileld Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it afliated with any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identication purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of t he parts manufactured by KOP. The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products. Emsco is a registered trademark/tradename of Continental-Emsco/National/Oilwell. Gardner-Denver ç is a registered trademark of Gardner/Denver ®. Ideco is registered trademark of National/Oilwell. KOP is in no way afliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identication purposes only.

23

®


24

®


ALL KAN DLE OIL FIE LD PRO DUCTS ARE SOLD OR OTHERWISE FURNISHED IN ACCORDANCE WITH THESE GENERAL TERMS AND CONDITIONS. KANDLE OILFIELD PRODUCTS, INC., (KOP) WARRANTS THE PRODUCTS SOLD BY IT TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF (1) YEAR FROM DATE OF SHIPMENT FROM KOP. KOP WILL REPAIR OR REPLACE AT KOP’S OPTION, F.O.B. KOP LOCATION WHERE THE PRODUCTS WERE MANUFACTURED, ANY PRODUCTS WHICH KOP DETERMINES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP, PROVIDED THAT KOP IS GIVEN PROMPT NOTICE IN WRITING OF ANY DEFECT; AND PRO VIDED B UYE R OR USE R HAS KE PT SUCH PRODUCTS IN CONDITION WHERE KOP CAN EXAMINE SAME; AND PROVIDED NO MACHINING, WELDING, HEATING, OR OTHERWISE ALTERING OF ANY KIND IS DONE TO SAID PRODUCTS AFTER SAME ARE PERFORMED OR SHIPPED FROM KOP’S FACILITIES. IN NO EVENT SHALL KOP BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR OTHER DAMAGES OF ANY NATURE. IT IS EXPRESSLY AGREED THAT THIS WARRANTY SHALL BE IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY FOR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. KOP DOES NOT WARRANT THAT ITS PRODUCTS MEET THE REQUIREMENTS OF ANY SAFETY CODE OF ANY STATE, MUNICIPALITY, OR OTHER JURISDICTION OR THAT THEY WILL PERFORM AS ANT ICI PATED OR DES IRED BY BUYER OR USE R AND /OR USE R AS SUM ES A LL RISK AND LIA BIL ITY WHATSOEVER RESULTED FROM USE THEREOF, WHETHER USED SINGLY OR IN CONJUNCTION WITH OTHER EQUIPMENT. PRODUCTS FURNISHED BY KOP BUT NOT MANUFACTURED BY KOP WILL CARRY ONLY THE WARRANTY OF THE MANUFACTURER OF SUCH PRODUCTS, IF ANY. KOP DOES NOT WARRANTY PRODUCTS NOT MANUFACTURED BY KOP. KOP’S LIABILITY FOR ANY LOSS OR DAMAGE IN ANY WAY RESULTING TO BUYER/USER FROM ANY FAILU RE OF A PRODUC T SHALL NOT EX CEE D

GENERAL TERMS AND CONDITIONS THE AMOUNT WHICH KOP RECEIVED FROM BUYER OR USER FOR THE PRODUCT FOUND TO BE DEFECTIVE. WHERE OTHER MANUFACTURERS PRODUCTS ARE USED IN KOP MANUFACTURED PRODUCTS PROVE DEFECTIVE, KOP’S LIABILITY SHALL EXIST ONLY TO THE EXTENT THAT KOP IS ABLE TO RECOVER FROM SUC H MANUFAC TURERS OR SUPPLIERS FOR SAID DEFECTS. KOP’S LIABILITY FOR DAMAGE TO OR LOSS OF PROPERTY OF BUYER OR OTHERS DURING PERFORMANCE OF WORK THEREON BY KOP OR WHILE IN KOP’S POSSESSION SHALL NOT EXCEE D THE PRICE RECEIVED BY KOP FOR ITS WORK ON THE ARTICLE LOST OR DAMAGED. KOP RETAINS THE RIGHT TO MAKE SUBSTITUTIONS AND MODIFICATIONS TO ITS PRODUCTS PROVIDING THAT SAID CHANGES DO NOT AFFECT THE PERFORMANCE OF THOSE ITEMS. KOP RETAINS FOR ITSELF ALL PROPRIETARY RIGHTS IN AND TO ALL DESIGNS, ENGINEERING DETAILS AND DATA CONCE RNING THE PRODUCTS SOLD BY IT. A N Y TA X E S O R C H A R G E S W H I C H K O P MAY BE REQUIRED TO PAY OR COLLECT UNDER ANY EXISTING OR FUTURE LAW UPON OR APPLICABLE TO THE SALE, PURCHASE, MANUFACTURE, TRANSPORTATION, DELIVERY, STORAGE, USE OR CONSUMPTION OF THE PRODUCTS SHALL BE FOR THE ACCOUNT OF THE BUYER. T H E R E A R E N O U N D E R S TA N D I N G S O R AGREEMEN TS BETWEE N BUYER OR USE R AND KOP RELATIVE HERETO WHICH ARE NOT FULLY EXPRESSED HEREIN, NO ACKNOWLEDGMENT, PURCHASE ORDER OR OTHER DOCUMENT WHICH CONTAINS ANY TERMS OR CONDITIONS OTHER THAN ANY AND ALL OF THESE IS BINDING ON KOP. THESE GENERAL TERMS AND CONDITIONS AND ANY SPECIAL CONDITIONS WHI CH MAY APP LY SHALL BE CONSTRUED UNDER AND GOVERNED BY THE LAWS OF THE STATE OF TEXAS.

25

®


Supreme Patriot Piston Dual Bonded Urethane Piston designed for pressures of up to 7500 psi and temperatures of 220oF. • Exclusive lip design for longer piston and liner life • Reduces drill time with fewer changes • Reliable performance and quality • 40% more urethane than competitive brands • Use with synthetic or oil based mud • “Bull Nose Lip” for easier installation • MADE IN USA

Supreme Patriot - HT H i g h T e m p P is t o n Specifically designed for harsh temperatures and pressure. • • • • • •

Temperature Range -20o F to 325o F Pressure Range 1500 psi to 7500 psi Constant seal “Bull Nose Lip” for easier installation Incredible piston and liner life MADE IN USA

Kandle Oilfield Products Kandle Oileld Products is the exclusive international d istributor for Supreme Patriot Pistons, as well as all of the Supreme elastomeric products. KOP offers these products to our customers either separately or together with the products KOP manufactures. KOP is a premium quality US manufacturer of Drilling products. Please forward your inquiries for any of the products offered here or on our website to : Kandle Oilfield Products

14019 Interdrive East / Houston, Texas 77032 USA Tel: 713-694-8671 / Fax: 713-694-3214 / email: [email protected] / www.kop.com

Kandle Oilfield Products Catalog (Drilling)

Recommend Documents