this paper will provide an insight of various techniques for earthquake resistant building with special refrence to base isoltion..Full description
Seismic Isolation
Earthquake Engineering
SYSTEM AND EQUIPMENT ISOLATIONDescription complète
Earthquake Engineering
this document is very helpful for students who are in search of base isolation systems. this is written bye a canadian student of ph.d structural enggineering
JSA ChevronFull description
Description : Risk Management
Job Safety Analysis/ Job Hazard Analysis for the use of hand tools
PERSONAL PROTECTIVE EQUIPMENT: Hard Hat, Safety Shoes Suitable for Electrical Work, PVC Gloves Safety Goggles SEQUENCE OF BASIC JOB STEPS
POTENTIAL HAZARDS
Plan the work involving Permit Applicant, Permit Issuer & Worksite Supervisor.
•
Refer Appendix - 10 of KOC F & S Regions, HSEMS Procedure Doc. No. SA.KOC.022 ‘Electrical Multilock & Tagout’
•
Ensure the correct tools & required PPEs are ready to use prior to carrying electrical isolation.
•
Identify the equipment to be isolated and any safety override to be carried out prior to isolation.
• • •
Raise electrical Isolation Certificate as per procedure. Obtain the permit from Asset Owner. Ensure the isolation to be carried out by authorized electrical person only.
•
Stop the equipment from local switch prior to isolating from substation.
Presence of Flammable / Toxic Gas in the Substation
•
Ensure the substation is free from flammable / toxic atmosphere.
Fire & Explosion
•
Keep suitable fire extinguishers ready for use.
• •
Identify & confirm the switchgear feeding electrical power to the equipment. Isolate safely electrical power from the switchgear.
Electrical Shock
•
Confirm the electrical isolation through proper tools.
Unauthorized Energizing of Equipment
•
Install lock & tag as per procedure as well as keep the key in safe custody.
•
Endorse the isolation in the permit and record details in the Isolation Logsheet as per procedure.
•
Place the Fuses removed in safe custody and record the information of Fuse removed & Earthing applied in the Isolation Certificate.
Non-compliance of KOC -HSEMS Procedures, F & S Regulations In-appropriate Tools & PPE Unintended Shutdown of other equipment / Unit / System
