JCB BACKHOE LOADER | 214e MA X. ENGINE POWER
92hp (68.5kW)
J C B B A C K H O E L O A D E R
B C
|
2 1 4 e
E
F J D
H A
G
STATIC DIMENSIONS JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, mainframe, componentized driveline and fully fully enclosed engine compartment. All fluid and component compartments compartments are lockable using the ignition key.
Machine model
214e-2WD
214e-4WD
f t-in (meter)
f t-in (meter)
Machine model
214e-2WD
214e-4WD
f t-in (meter)
f t-in (meter)
1-2 (0.36)
0-10 (0.25)
A Transpor t leng th
23-0 (7.01)
23-0 (7.01)
F
B
11-2 (3.40)
11-2 (3.40)
G Front wheel tr ack
5-11 (1.80)
6-1 (1.85)
C Height to top of cab/canopy
9-3 (2.82)
9-3 (2.82)
H Rear wheel track
5-5 (1.65)
5-8 (1.73)
D Over all width with bucket
7-4 (2.24)
7-4 (2.24)
J Wheelbase
6-11 6-1 1 (2.11) (2.11)
7-1 (2.16)
E
1-2 (0.36)
1-2 (0.36)
Transpor t height – standard backhoe
Ground clear ance – mainfr ame
Ground clearance – front axle
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e OPERATING WEIGHTS
STEERING
Operating weight includes machine equipped with standard loader bucket, 24" HD backhoe bucket, full fluid levels and SAE opera operator tor..
Machine model
214e-2WD
214e-4WD
lb (kg)
lb (kg)
Base unit – standar d backhoe
13046 (5919)
13376 (6069)
Cab, Ex tradig
14368 (6519)
14698 (6669)
176 (80)
176 (80)
Add for
ENGINE
Rated engine RPM
268 cu. inches (4.4 liters)
268 cu. inches (4.4 liters)
Natural
Turbo
220 0
220 0
Horsepower ra tings
HP (kW)
HP (kW)
SAE gross
83 (62.0)
92 (68.5)
SAE net
80 (59.8)
86.5 (64.5)
Ma ximum torque
lb-f t (Nm)
lb-f t (Nm)
SAE gross
227 (308)
291 (395)
SAE net
224 (304)
285 (387)
1400
1350
Max. torque RPM
Steer ing axles Type Steer ing tur ns – lock to lock
Loader clearance cir cle
214e-2WD
214e-4WD
Front
Front
Hydrostatic
Hydrostatic
3.00
3.00
f t-in (meter)
f t-in (meter)
25-3 (7.70)
26-5 (8.05)
33-10 (10.31)
34-11 (10.64)
ENGINE SUPPORT SYSTEM
Four cylinder, direction injection diesel. Gear driven water pump, cast iron engine sump, spin-on oil and fuel filters, water separator, dual element air cleaner, 20" fan. Parent bore engine block, glow plug cold start aid.
Aspiration
Machine model
Tur ning cir cle – unbraked
SAE operator
Displacement
Power hydrostatic system utilizing the main hydraulic pump via a steering priority valve. Emergency power off steering.
Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals. Fuel type Diesel. Replaceable spin-on car tridge plus water/sediment separator. Fuel filter Air cleaner Dual, dry element cyclonic type. Pre-cleaner option. Oil filter and lubrication Full flow, spin-on type filter. Cooling system Hot climate specification, pressur ized to 14.5 psi (1.0 bar) 20" suction fan. Pressurized recovery tank with integral filler neck.
J C B B A C K H O E L O A D E R |
2 1 4 e
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e ELECTRICAL AND INSTRUMENTATION
FRONT AXLE
12 volt negative ground, utilizing wiring and connectors meeting IP69 water and dust ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal. Gauges Tachometer,, engine coolant temp, fuel level, hour meter. Tachometer Warning system Audible and visual system for for engine, transmission, park brake, battery charge condition, air cleaner restriction. Battery 12V, 950 CCA. Pre-wire Pre-wire for beacon. Horn Front horn button mounted on forward-to-reverse lever. Accessory 12V power outlet on instrument panel. Reverse alarm Standard fit. Meets SAE requirements.
JCB front axles are designed and built specifically for backhoe loaders loaders and accept a wide variety of tire combinations. combinations.
Machine model Type
Axle ratings
lb (kg)
lb (kg)
36383 (16508)
36383 (16508)
Dynamic load rating
18300 (8303)
18300 (8303)
REAR AXLE
The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. Loaders. They feature synchronized shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximize production.
Manufac tur er Type
214e-2WD
214e-4WD
JCB
JCB
JCB Synchroshut tle
JCB Synchroshuttle
Torque conver ter
Single stage, dual phase
Torque conver ter ratio
3.01:1
3.01:1
Gears for war d/r everse
4F/4R
4F/4R
Gear selec tion
Manual
Manual
Power shuttle
Power shut tle
Travel speeds
mph (kph)
mph (kph)
Tires equipped
19.5-24
19.5L-24
Gear 1
3.4 (5.5)
3.4 (5.5)
Shuttle control – F/R
214e-4WD JCB Max-Tr ac tor que propor tioning
Static load r ating
TRANSMISSION
Machine model
214e-2WD Flame cut bar with f ixed tread
Gear 2
5.6 (8.9)
5.6 (8.9)
Gear 3
11.9 (19.1)
11.9 (19.1)
Gear 4
22.5 (36.0)
22.5 (36.0)
JCB rear axles are designed and built specifically for backhoe loaders loaders and accept a wide variety of tire combinations.
Machine model Type
Axle ratings
214e-2WD
214e-4WD
|
JCB limited slip dif fer ential outboar d planetar y drive
lb (kg)
lb (kg)
Static load r ating
55125 (25011)
55125 (25011)
Dynamic load rating
27562 (12505)
27562 (12505)
SAE J43 r ating
12956 (5878)
12956 (5878)
J C B B A C K H O E L O A D E R 2 1 4 e
OPERATOR’S OPERATO R’S AREA ARE A Meets SAE ROPS/FOPS requirements. Standard features include the following:
Cab
Canopy
Heavy duty suspension seat
●
●
Heater/pressurizer
●
Front and rear wipers
●
Front and rear window washers
●
2" seat belt (3" option)
●
●
4 front and 2 rear work lamps
●
●
12V power outlet
●
Instrument vandal cover
● ●
Brake lights, hazard lamps, turn signals
●
●
Interior rear view mirror
●
●
Side-mounted instrument panel
●
●
Deluxe floor mat
●
●
Cup holder
●
●
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e LOADER DIMENSIONS
STANDARD LOADER – General Purpose Bucket JCB loaders provide high-capacity buckets with high lift and breakout forces for maximum productivity. Load Load retention system provides bucket roll-out on the lift cycle for maximum load retention. Two spool valve is standard.
Machine model
V
214e-2WD
lb (kg)
Bucket br eakout force
11730 (5322)
11730 (5322)
Lif t capacity to full height
6 7 5 0 (3 0 6 2 )
6750 (3062)
Q
P
LOADER ATTACHMENTS – Direct Mount O
N
JCB Backhoe Loaders Loaders utilize heavy-duty, high-capacity loader buckets. buckets. All buckets feature a drilled cutting edge to accept a bolt-on cutting edge or teeth. Flat top section provides rigidity and bucket sight level indicator.
M
Machine model R
T
Machine model
794 (360)
794 (360) 9 7 0 (4 4 0 )
6-in-1 bucket – 88", 1.25 cu.yd.
1540 (699)
1540 (699)
214e-2WD
214e-4WD
f t-in (meter)
f t-in (meter) 7-4 (2.24) 8-10 (2.69)
N Load over height
10-6 (3.20)
10-6 (3.20)
Bucket br eakout force Lif t capacity to full height
O Loader hinge pin height
11-1 (3.38)
11-1 (3.38)
P
13-4 (4.06)
13-4 (4.06)
2-8 (0.81)
2-8 (0.81)
V Dump angle – degr ees
2 1 4 e
JCB multi-purpose loaders feature a 6-in-1 bucket, three-spool loader loader valve, dual lever loader loader control and loader pipework.
7-4 (2.24)
Digging depth
|
MULTI-PURPOSE LOADER – 6-in-1 Bucket
8-10 (2.69)
R Rollback @ ground – degr ees
lb (kg)
970 (440)
M Dump height
Q Dump reach at full height
214e-4WD
lb (kg) HD bucket – 88", 1.25 cu.yd.
Overall width with bucket
Maximum operating height
214e-2WD
GP bucket – 88", 1.25 cu.yd.
LOADER DIMENSIONS
T
214e-4WD
lb (kg)
J C B B A C K H O E L O A D E R
41°
41°
0-5 (0.13)
0-5 (0.13)
4 2°
42 °
Machine model
214e-2WD
214e-4WD
lb (kg)
lb (kg)
12127 (5502)
12127 (5502)
6211 (2818)
6211 (2818)
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e BRAKES
SERVICE CAPACITIES
Hydraulically actuated, self-adjusting, oil immersed, inboard, multi-plate type. Separate master cylinder and brake oil reservoir. Independent disk and caliper type parking brake mounted on rear of transmission.
214e – 2WD and 4WD
Two pedal service brakes with interlock for individual or simultaneous operation.
Machine model Cooling system
214e-4WD
gal (liter)
gal (liter)
6.1 (23)
6.1 (23)
42.5 (160)
42.5 (160)
Engine oil with f ilter
2.6 (10)
2.6 (10)
Synchro shut tle tr ans with f ilter
4.8 (18)
4.8 (18)
Rear axle
4.2 (16)
4.2 (16)
N/A
4.2 (16)
Fuel tank
Front drive axle Dr ive axle hubs – each
0.4 (2)
0.4 (2)
Hydr aulic tank
19.8 (75)
19.8 (75)
Hydr aulic system incl. tank
30.4 (115)
30.4 (115)
TIRES
HYDRAULIC SYSTEM
Tires listed are most popular sizes. See your JCB Dealer for a full listing of available tire sizes and tread patterns.
Machine model
214e-2WD
214e-2WD
11L-16, F3, 12 ply – front
Standar d
17.5L-24, R4, 10 ply – r ear
Standar d
19.5L-24, R4, 10 ply – r ear
Optional
214e-4WD
Open center system incorporating a single gear pump which supplies oil for loader, backhoe and steering systems. Side mounted hydraulic tank with sight glass and lockable cap. JCB cylinders, million cycle hydraulic hoses with abrasion protection. Structural steel tubing to resist impact.
Machine model Pump output
14-17.5, F WD, 10 ply – front
Standar d
19.5L-24, R4, 10 ply – r ear
Standar d
214e-2WD
214e-4WD
gpm (lpm)
gpm (lpm)
29 (110)
29 (110)
psi (bar)
psi (bar)
System relief pr essur e
3300 (228)
3300 (228)
Filter r ating
10 micron
10 micron
J C B B A C K H O E L O A D E R |
2 1 4 e
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e BACKHOE BUCKETS
BACKHOE DIMENSIONS – 214e 2WD & 4WD
JCB Backhoe Loader Loader buckets are designed specifically for use on JCB machines. Dual position tipping link provides positions to maximize tearout force or to maximize rotation for straight wall digging and improved load retention. All JCB buckets include heavy-duty features consisting of a 1"x18" 1"x18" cutting edge, back straps, box section cross member, member, and full length, chamfered side cutters.
Heavy duty trenching buckets
stan st anda darrd bac backh kho oe
Exttra Ex radi digg – ret retra ract cted ed
Extr Ex trad adiig – ext exten ende ded d
f t-in (meter)
f t-in (meter)
f t-in (meter)
A SAE dig depth – max.
14-4 (4.37)
14-7 (4.45)
18-0 (5.49)
A SAE di dig depth – 2' f lat bot tom
14-3 (4.34)
14-6 (4.42)
17-10 (5.4 4) 21-0 (6.40)
B
Reach from swing pivot
17-7 (5.36)
17-10 (5.44)
Bucket width – in.
12
18
24
24
30
36
C Reach from rear axle center
21-6 (6.55)
21-10 (6.65)
25-0 (7.62)
Bucket width – mm
305
45 5
610
610
760
910
D Maximum oper ating height
17-7 (5.36)
17-8 (5.38)
20-0 (6.10)
Number of teeth
3
4
4
5
5
6
E
Loading height
10-4 (3.15)
10-6 (3.20)
11-10 (3.61)
Capacity – cu.f t.
2.8
4.9
7.1
7.1
9.2
11.3
F
Loading r each
5-8 (1.73)
5-8 (1.73)
9-1 (2.77)
Capacity – cu.m
0.08
0.14
0.20
0.20
0.26
0.32
Swing ar c – degr ees
180°
180°
180°
Weight – lbs
293
359
408
419 41 9
478
544
Stabilizers – tr anspor t
7-2 (2.18)
7-2 (2.18)
7-2 (2.18)
Weight – kg
133
163
185
190
217 21 7
247
Stabilizers – operating
10-6 (3.20)
10-6 (3.20)
10-6 (3.20)
15°
15°
15°
Leveling angle – degr ees
See your JCB Dealer for availability of other backhoe buckets and attachments.
Bucket rotation – degr ees
185° max. power/201° max. rotation
J C B B A C K H O E L O A D E R |
2 1 4 e F D E
B
C A
Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e BACKHOE PERFORMANCE
J C B B A C K H O E L O A D E R
BACKHOE PERFORMANCE
stan st and dar ard d bac backh khoe oe
Extr Ex trad adig ig – ret retra ract cted ed
Exttra Ex radi digg – ext exten ende ded d
lb (kg)
lb (kg)
lb (kg)
Bucket for ce
11470 (5204)
11470 (5204)
11470 (5204)
Dipper for ce
7000 (3176)
6 5 6 5 (2 9 7 9 )
4810 (2182)
5
+ 4 feet
6615 (3001)
4680 (2123)
3195 (1450)
4
+ 6 feet
5405 (2452)
3970 (1801)
2460 (1116)
+ 8 feet
4945 (224 4)
3710 (1683)
2540 (1152)
+ 10 feet
4200 (1906)
3690 (1674)
2240 (1016)
+ 12 feet
2970 (1348)
3450 (1565)
1745 (792)
+ 12 feet
3155 (1431)
2630 (1193)
1420 (644)
+ 8 feet
2665 (1209)
2280 (1034)
1280 (581)
22
6
20
Extradig (Extended) 18
16
Standard Dipper Extradig (Retracted)
Dipper lift capacity – SAE J31 14
12
3
10
8 2 6
Boom lift capacity capacity – SAE J31
4 1 2
0
+ 4 feet
26 40 (1198)
2180 (989)
Ground level
2735 (1241)
1950 (885)
1390 (631)
– 4 feet
2555 (1159)
1770 (803)
1675 (760)
– 8 feet
2420 (1098)
1610 (730)
1800 (817)
– 10 feet
2430 (1103)
1430 (649)
1810 (821)
0
1275 (578)
Lift capacity figures comply with SAE J31. All figures are stated in pounds (kilograms). The large arc indicates boom lift. The small arc indicates dipper lift with the boom at 63 degrees. Units are equipped with standard equipment as listed in this data sheet and a 24" backhoe backhoe bucket.
2 1
|
4
2 1 4 e
6 2 8
3
10
12 4 14
16 5
18
6
20 26 8
24
22 7
20
18
6
16 5
14
12 4
10 3
8
6
4
2
2 1
0 Feet 0 Metres
JCB HYDRAULIC BREAKERS JCB hydraulic breakers are designed for use on JCB Backhoe Backhoe Loaders. They feature constant blow energy, energy, pressure damping, heavy-duty side plates and high impact frequency for maximum production. Coupled with factory installed hydraulic breaker circuit, the JCB breakers and Backhoe Loader Loader make a perfect demolition combination. Model Model 360Q is equipped with sound insulation for quiet operation.
Bre aker model
260
360
Energy class – f t./lb
5 00
7 50
75 0
40 0- 20 00
600-1800
600-1800
Oil f low r ange – gpm (lpm)
6.6-26 (25-100)
13-40 (50-150)
13-40 (50-150)
Operating weight – lb (kg)
573 (260)
891 (405)
921 (418)
Impac t fr equency – bpm
Operating pr essur e – psi (bar) Tool diameter – in. (mm)
360Q
1450-2100 (100-145) 2.48 (63)
A wide variety of tools are available for JCB JCB breakers. See your JCB Dealer. Dealer.
2.75 (70)
2.75 (70) Helping You Get the Job Done!
JCB BACKHOE LOADER | 214e
A GLOBAL COMMITMENT TO QUALITY QUALITY JCB’s total commitment commitment to its products and customers has helped it grow from a one-man one-man business into the World’s 5th largest manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic telescopic handlers, wheel loaders, loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments investments in the latest latest production technology technology,, the JCB factories have become some of the most advanced in the World.
J C B B A C K H O E L O A D E R |
By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become become renowned all over the world for perfor performance, mance, value and and reliability.
2 1 4 e
And with a global global sales and service network of over 400 distributors and and agents, the company company exports over 70% of its production to all five continents. Through setting the standards by which others are judged, JCB has become one of Britain’s most impressive success stories.
JCB Headquarter s Savannah, 2000 Bamford Blvd., Pooler, GA 31322. 31322. Tel: Tel: 912.447.2000. 912.447.2000. Fax: 912.447.2299 912.447.2299.. www.jcb.com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. USA 21052-12/04 Issue 2
Helping You Get the Job Done!