ISO 9606-2_Qualification Testing of Welders_Fusion Welding_Aluminium and Alumonium Alloys

March 2005

D EUTSCHE NORM

{

DIN EN ISO 9606-2

Supersedes DIN EN 287-2, September 1997 edition.

ICS 25.160.10

Qualification testing of welders Fusion welding Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) English version of DIN EN ISO 9606-2

Prüfung von Schweißern – Schmelzschweißen – Teil 2: Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)

A comma is used as the decimal marker.

National foreword This standard has been published in accordance with a decision taken by CEN/TC 121 to adopt, without alteration, International Standard ISO 9606-2 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Schweißtechnik (Welding Standards Committee). The aim of this standard is to ensure that the qualification testing of welders is performed under the same conditions and using the same types of test piece, irrespective of where such tests are held. By passing the test as specified here, a welder demonstrates that he is adequately qualified to be employed for the fusion welding of steel in industry within the scope specified in this standard. The standard thus provides a basis for mutual recognition of welder qualification test certificates by the bodies responsible for the various fields of application. This standard does not provide information on examiners and testing bodies involved in the qualification testing of welders since these are indicated in the relevant legal regulations, specialized standards, codes of practice, or technical delivery conditions. Welders who apply for approval in Germany are required to take the job knowledge test detailed in Annex A. Welders who are employed in Germany and have not passed such a test will be at least required to demonstrate that they have some knowledge in occupational safety and accident prevention. DIN ISO 857 is the standard corresponding to International Standard 857-1 referred to in clause 2 of the EN ISO. Amendments This standard differs from DIN EN 287, September 1997 edition, in that it has been completely revised. Previous editions DIN 8561: 1974-02; DIN EN 287-2: 1992-04, 1997-09. Continued overleaf. Document comprises 36 pages.

© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, License provided by I.H.S. Germany has the exclusive right of sale for German Standards (DIN-Normen). For Internal Use Only

Uncontrolled copy when printed

English price group 15 www.din.de www.beuth.de

EE"

06.05

9636328


License provided by I.H.S. Germany For Internal Use Only

EN ISO 9606-2 December 2004

Supersedes EN 287-2:1992.

ICS 25.160.10

English version

Qualification testing of welders Fusion welding Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) Epreuve de qualification des soudeurs – Soudage par fusion – Partie 5: Aluminium et alliages d’aluminium (ISO 9606-2:2004)

Prüfung von Schweißern – Schmelzschweißen – Teil 2: Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)

This European Standard was approved by CEN on 2004-09-23. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels

© 2004. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.



Ref. No. EN ISO 9606-2:2004 E

Page 2 EN ISO 9606-2:2004

Page

3 3 4 4 5 5 5 5 6 6 6 7 8 9 9 10 10 11 12 13 13 13 17 18 18 23 23 24 24 24 24 24 24 25 26 27 31 33 34 35



Page 3 EN ISO 9606-2:2004



Page 4 EN ISO 9606-2:2004



Page 5 EN ISO 9606-2:2004



Page 6 EN ISO 9606-2:2004



Page 7 EN ISO 9606-2:2004



Page 8 EN ISO 9606-2:2004



Page 9 EN ISO 9606-2:2004



Page 10 EN ISO 9606-2:2004



Page 11 EN ISO 9606-2:2004



Page 12 EN ISO 9606-2:2004



Page 13 EN ISO 9606-2:2004



Page 14 EN ISO 9606-2:2004



Page 15 EN ISO 9606-2:2004



Page 16 EN ISO 9606-2:2004



Page 17 EN ISO 9606-2:2004



Page 18 EN ISO 9606-2:2004



Page 19 EN ISO 9606-2:2004



Page 20 EN ISO 9606-2:2004



Page 21 EN ISO 9606-2:2004



Page 22 EN ISO 9606-2:2004



Page 23 EN ISO 9606-2:2004



Page 24 EN ISO 9606-2:2004



Page 25 EN ISO 9606-2:2004



Page 26 EN ISO 9606-2:2004



Page 27 EN ISO 9606-2:2004



Page 28 EN ISO 9606-2:2004



Page 29 EN ISO 9606-2:2004



Page 30 EN ISO 9606-2:2004



Page 31 EN ISO 9606-2:2004



Page 32 EN ISO 9606-2:2004



Page 33 EN ISO 9606-2:2004



Page 34 EN ISO 9606-2:2004



Page 35 EN ISO 9606-2:2004



ISO 9606-2_Qualification Testing of Welders_Fusion Welding_Aluminium and Alumonium Alloys

Recommend Documents