ISA 75.19.01 Hydro Static Testing of Control Valves

STANDARD

ISA –75. –75.19.01–2001 19.01–2001 (Formerly (F ormerly ANSI/ISA –75. –75.19–1995) 19–1995)

Hydrostatic Testing of Control Valves

Approved 04 April 2001 TM

ISA–The Instrumentation, Systems, and Automation Society

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---

Copyright The Instrumentation, Systems, and Automation Society Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

Licensee=Technip Licensee=Technip Abu Dabhi/5931917101 Dabhi/5931917101 Not for Resale, 02/21/2006 21:14:10 MST

ISA–75.19.01–2001 Hydrostatic Testing Testing of Control Valves ISBN: 1-55617-753-4 Copyright  2001 by ISA-The Instrumentation, Instrumentation, Systems Systems and Automation Society. Society. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by b y any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publi sher. ISA 67 Alexander Drive P. O. Box 12277 Research Triangle Triangle Park, North North Carolina 27709

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


Licensee=Technip Abu Dabhi/5931917101 Dabhi/5931917101 Not for Resale, 02/21/2006 21:14:10 MST

ISA–75.19.01–2001 Hydrostatic Testing Testing of Control Valves ISBN: 1-55617-753-4 Copyright  2001 by ISA-The Instrumentation, Instrumentation, Systems Systems and Automation Society. Society. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by b y any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publi sher. ISA 67 Alexander Drive P. O. Box 12277 Research Triangle Triangle Park, North North Carolina 27709

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



—3—

ISA–75.19.01–2001

Preface This preface as well as all footnotes and annexes are included for informational purposes and are not part of ISA–75.19.01–2001. The standards referenced within this document may contain provisions which, through reference in this text, constitute requirements requirements of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and a nd parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated within w ithin this document. Members of IEC IEC and ISO maintain maintain registers of currently valid International International Standards. ANSI maintain registers of currently valid U.S. National Standards. This document has been prepared as part of o f the service of ISA–The Instrumentation, Systems, and Automation Society, Society, toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; 549-8411; Fax (919) 549-8288; E-mail: [email protected]. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware aware of the benefits to USA users of ISA standards standards of incorporating suitable references to the SI (and the metric system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The Modern Metric System , published by the American Society S ociety for Testing Testing & Materials as IEEE/ASTM SI 10-97, and a nd future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welcome the participation of all concerned individuals and interests in the development of ISA ISA standards, recommended practices, practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical reports that ISA develops. CAUTION — ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS REQUIRED FOR USE OF THE STANDARD, STANDAR D, IT WILL REQUIRE THE OWNER OF THE PATENT TO EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF O F THE PATENT BY USERS COMPLYING WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE FREE FROM UNFAIR DISCRIMINATION. EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD , THE USER IS CAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES, PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PA TENTS THAT MAY REQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT BR OUGHT TO ITS ATTENTION. THE USER SHOULD CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE USER’S INTENDED APPLICATION.

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



ISA–75.19.01–2001

—4—

HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USER’S PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE AP PLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS STANDARD. The following people served as members of ISA Subcommittee SP75.19: NAME

COMPANY

J. Reed, Chairman W. Weidman, Managing Director G. Barb G. Borden R. Brodin F. Cain J. McCaskill K. Schoonover

Norriseal Parsons Energy & Chemicals Group Consultant Consultant Fisher Controls International, Inc. Flowserve Corporation Power Chokes Con-Tek Valves, Inc.

The following people served as members of ISA Committee SP75: NAME

COMPANY

W. Weidman, Managing Director D. Buchanan, Chairman A. Abromaitis H. Backinger G. Barb H. Baumann J. Beall W. Black W. Blackwell H. Boger G. Borden S. Boyle R. Brodin F. Cain A. Engels H. Fuller J. George L. Griffith D. Grunenberg J. Jamison R. Jeanes J. Kersh C. Langford W. Lestan

Parsons Energy & Chemicals Group Union Carbide Corp. Red Valve Co., Inc. Consultant Consultant H B Services Partners LLC Eastman Chemical Co. Cashco, Inc. Industrial Valve Masoneilan Dresser Consultant Metso Automation USA, Inc. Fisher Controls International, Inc. Flowserve Corp. Praxair, Inc. Valvcon Corp. Richards Industries Consultant Richards Industries Bantrel, Inc. TXU Electric M W Kellogg Co. Cullen G. Langford, Inc. Dresser Valve Division


Licensee=Technip Abu Dabhi/5931917101 Not for Resale, 02/21/2006 21:14:10 MST

` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

—5—

A. Libke R. Louviere J. McCaskill A. McCauley R. McEver H. Miller T. Molloy L. Ormanoski J. Ozol W. Rahmeyer J. Reed K. Schoonover A. Shea E. Skovgaard H. Sonderegger

ISA–75.19.01–2001

DeZurik Valve Co. Services Unlimited Power Chokes Chagrin Valley Controls, Inc. Emerson Valve Automation Control Components, Inc. CMES, Inc. Frick Co. Northern States Power Utah State University Norriseal Con-Tek Valves, Inc. DeZurik/Copes-Vulcan Leslie Controls, Inc. Anvil International, Inc.

This standard was approved for publication by the ISA Standards and Practices Board on 04 April 2001. NAME

COMPANY

M. Zielinski D. Bishop M. Cohen M. Coppler B. Dumortier W. Holland E. Icayan A. Iverson R. Jones V. Maggioli T. McAvinew A. McCauley, Jr. G. McFarland D. Rapley R. Reimer J. Rennie H. Sasajima I. Verhappen R. Webb W. Weidman J. Weiss M. Widmeyer R. Wiegle C. Williams G. Wood

Fisher-Rosemount Systems, Inc. Consultant Consultant Ametek, Inc. Schneider Electric Southern Company Advanced Control & Engineering Solutions Ivy Optiks Dow Chemical Co. Feltronics Corp. Merrick & Co. Chagrin Valley Controls, Inc. Westinghouse Process Control Inc. Rapley Consulting Inc. Rockwell Automation Factory Mutual Research Corp. Yamatake Corp. Syncrude Canada Ltd. Power Engineers Parsons Energy & Chemicals Group EPRI EG&G Defense Materials CANUS Corp. Eastman Kodak Co. Graeme Wood Consulting



` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

This page intentionally left blank.

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



—7—

ISA–75.19.01–2001

Contents 1 Scope ............................................................................................................................................... 9 2 Definitions......................................................................................................................................... 9 3 Test fixture and instrumentation ....................................................................................................... 9 4 Test requirements............................................................................................................................. 9 5 Test procedures.............................................................................................................................. 11 6 Acceptance standards.................................................................................................................... 11 7 Test pressures................................................................................................................................ 12 Annex A — Test Pressures (Bar) ........................................................................................................ 23 Annex B — References ....................................................................................................................... 27

` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -



This page intentionally left blank. ` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -



—9—

1

ISA–75.19.01–2001

Scope

1.1 This standard applies to control valves having bodies, bonnets, cover plates, and bottom flanges made of carbon steel, low alloy and high alloy (stainless) steel, nickel-base alloy, cast iron, and ductile iron. 1.2 This standard establishes requirements and definitions for standard hydrostatic shell testing of control valves by the valve manufacturer to prove the structural integrity and leak tightness of the valves’ pressure retaining parts, including any closure parts such as the valve body to bonnet joint, but excluding packings, bellows or other moving seals and packing leakoff connections. Bellows or similar moving stem seals may be pressure tested after assembly at a pressure to be agreed upon by the valve manufacturer and the purchaser. The requirements of this standard do not cover pneumatic and hydraulic actuators and regulators. 1.3 This standard describes and specifies the specific circumstances of hydrostatic shell testing of control valves and is in accordance with the hydrostatic testing requirements of ASME B16.1, ASME B1 6.34 and ASME B16.42 with the exception that the test requirements of paragraph 4.8 are not allowed by ASME B16.34. 1.4 WARNING – Serious bodily harm can be caused by high velocity leaks through the shell or seals, resulting from the energy stored in the pressurized fluid and containment equipment. Care should be exercised to ensure the safety of test and inspection personnel. Specific safety requirements for conducting hydrostatic testing and inspection are not within the scope of this standard.

2

Definitions

2.1 control valve: refer to ANSI/ISA-75.05.01-2000, "Control Valve Terminology." 2.2 test fixture: a test fixture is a device to close off the end connections and/or stem seal areas of the control valve to allow pressurization for hydrostatic shell testing.

3

Test fixture and instrumentation

3.1 Test fixtures include, but are not limited to the following: plugs with tie-bars and tie-rods, hydraulic presses, plugs or flanges attached to the pipe connections, bosses or lugs on the valve, and expandable rubber plugs. For butt welding end valves when end plugs are used, the seal point shall be as close to the weld end as practical without overstressing the weld preparation. 3.2 The analog or digital pressure measuring instruments used in testing shall be of the indicating or recording type. 3.3 The valve manufacturer shall be responsible for maintaining the accuracy of the p ressure measuring instruments. 3.4 Pressure measuring instruments shall be accurate within 3% at test pressure, and analog-type shall be used between 20% and 80% of their scale range.

4

Test requirements

4.1 The control valve, with or without its actuator, must be complete before hydrostatic shell testing, except as permitted in 4.2, 4.3, 4.4, and 4.8.

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



ISA–75.19.01–2001

4.2

— 10 —

It is permissible to disassemble the valve after hydrostatic shell testing, provided

a) new gaskets or seals used to reassemble the valve are of the same kind and size; b) equivalent studs and nuts are used; c) the same torquing procedure is used, or steps are taken to ensure the same pre-test bolt loads result; and d) an air or water leak test at lower than the hydrostatic shell test pressure is performed to ensure proper gasket installation. 4.3 All cavities pressurized in service shall simultaneously be subjected to the hydrostatic shell test pressure. Moving stem seals such as bellows, diaphragms, stem, and packing, that may be damaged by the hydrostatic shell test pressure, or trim parts that do not affect the pressure boundary, need not be installed during testing. 4.4 Valves with welded-on nipples, flanges, reducers and/or increasers shall be hydrostatically shell tested in accordance with paragraph 4.4 (a) or (d), at the manufacturer’s option, unless paragraph 4.4 (b) or (c) is agreed to by both the valve manufacturer and the purchaser. a) Hydrostatically shell test the valve alone at the appropriate pressure for its class and do not retest after welding on any of the nipples, flanges, reducers or increasers. b) Hydrostatically shell test the valve alone at the appropriate pressure for its class and retest the valve assembly after welding on any of the nipples, flanges, reducers or increasers with the pressure in accordance with the specification applicable to the nipples, flanges, reducers or increasers. The purchaser shall provide the design pressure and temperature and the applicable specifications to the valve manufacturer. c) Hydrostatically shell test the valve including all weld-on nipples, flanges, reducers and increasers with the pressure in accordance with the specification applicable to the nipples, flanges, reducers and increasers. The valve nameplate and required valve body marking must then indicate the pressure and temperature limit as determined by the nipples, flanges, reducers and increasers. d) Hydrostatically shell test the valve including all welded-on nipples, flanges,reducers, and increasers with the pressure in accordance with this standard, provided that the nipples, flanges, reducers and increasers are adequate for that pressure. 4.5 The valve shall not be painted or otherwise coated with materials capable of sealing against leakage before the shell tests are completed, except internal lin ings or coatings included in the design (e.g., nonmetallic butterfly valve body linings) are permitted. Chemical corrosion protection treatments are permitted. If valve parts are to be painted for storage, they shall be hydrostatically shell tested before painting, provided the fully assembled valve is again tested in accordance with paragraph 4.2 (d). If the presence of purchaser’s representative is specified for hydrostatic shell tests, painted valves may be retested without removal of the paint, unless otherwise agreed to by the valve manufacturer and purchaser. Assembled valves having bodies and bonnets or cover plates that have been separately tested in accordance with sections 5 through 7 prior to having been painted or coated, may be painted o r coated prior to final testing in accordance with sections 5 through 7. Wrought welded-on nipples, flanges, increasers and reducers need not have their protective coating removed for hydrostatic shell testing.

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



— 11 —

4.6

ISA–75.19.01–2001

The valve shall not be seated on the main seat nor on the back seat during the hydrostatic shell test.

4.7 If a valve is dual pressure rated (inlet rating higher than outlet rating from causes such as different wall thicknesses, flange rating, or materials), it may be necessary to separate the high pressure portion of the valve from the low pressure portion with a temporary barrier and test each portion at its respective test pressure. 4.8 Pressure retaining parts may be hydrostatically shell tested separately if all of the following conditions are satisfied: a) all the pressure retaining parts in the valve assembly are hydrostatically tested at the pressures in accordance with section 7, "Test Pressures;" b) the hydrostatic test is performed in a manner that simulates all loadings, fasteners, and restraints present when the part is tested in a completed valve; c) individual part testing is agreed to by both the manufacturer and the purchaser; and d) the fully assembled valve is pressure tested in accordance with paragraph 4.2 (d).

5

Test procedures

5.1 After filling the valve with water, which may contain a corrosion inhibitor, or with other suitable liquid (provided such liquid has a viscosity not greater than water), and venting all air, each valve shall be pressurized to no less than the pressures given in table 2 or table A.1, except as covered in clause 7.4. CAUTION: IF AIR IS PRESENT IN THE TEST FLUID, THERE ARE HAZARDS INVOLVED AND APPROPRIATE PRECAUTIONS SHOULD BE TAKEN. 5.2

The minimum duration of test pressure before start of inspection shal l be as follows:

Table 1 — Minimum test duration (minutes) Class 150 & Lower

Class 250 thru 600

Class 900 thru 1500

Class 2500 & Higher

2" & Smaller

1

1

2

3

2-1/2 " thru 4"

2

2

4

5

5 " thru 8"

2

3

5

8

10" & Larger

3

5

8

10

Nominal Valve Size

For classes not shown, use next higher class.

5.3

6

The temperature of the test liquid shall not exceed 52 °C (125°F).

Acceptance standards

6.1 Any visually detected weeping or leaking through the pressure boundary walls that are part of the valve body assembly shall be cause for rejection. Leakage through the static seals and gasketed joints is also cause for rejection unless specifically allowed by the design specifications. 6.2 Distortion due to hydrostatic shell testing that impairs satisfactory functional operation of the valve shall be cause for rejection.

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



ISA–75.19.01–2001

7

— 12 —

Test pressures

7.1 Hydrostatic shell test pressures for steel and nickel-base alloy, and other alloy valves are calculated by multiplying the 38°C (100°F) working pressures by 1,5 and rounding off to the next higher 25 psig (pounds per square inch gage) increment in accordance with ASME B16.34. For other materials within the scope of this standard but not listed in table 1, and for Intermediate and Limited Classes, the above method shall be used to determine the test pressure. 7.2

Hydrostatic shell test pressures for cast iron valves shall be in accordance with ASME B16.1.

7.3 Hydrostatic shell test pressures for nodular (ductile) iron valves shall be in accordance with ASME B16.42. 7.4 For other materials within the scope of this standard but not incl uded in tables 1, 2, or A.1 and whose pressure ratings are given in a published standard or are determined by the manufacturer, the hydrostatic shell test pressures shall be calculated as in paragraph 7.1 or paragraph 7.5, as applicable. 7.5 The metric equivalents of all test pressures in table 2 are given in table A.1 (annex A) and are calculated by converting 1,5 times the 38 °C (100°F) working pressure in psig to bar and then rounding off to the next higher bar increment except for values below 10 bar which are rounded off to the next higher 0,1 bar increment1.

` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

______ 1

1 bar = 100 kPa = 100 000 Pa = 0,1 MPa = 14,5038 psi.



— 13 —

r a l u b u T

e d a r G

c . e o p S N

s r a B

` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -

s l a i r e t a m 1 p u o r G – s n o i t a c i f i c e p s l a i r e t a m f o t s i L — 2 e l b a T

e d a r G

c . e o p S N

s n o i t a c i f i c e p S M T S A e l b a c i l p p A

m r o F t c u d o r P

s e t a l P

e d a r G

c . e o p S N

s g n i t s a C

e d a r G

c . e o p S N

s g n i g r o F

e d a r G

c . e o p S N

n l i o a t n a i n g i l m o a N s i e r e D t a M

p . u o o r N G Copyright The Instrumentation, Systems, and Automation Society Provided by IHS under license with ISA No reproduction or networking permitted without license from IHS

0 0 7 7 B C 2 2 7 7 6 6 A A

ISA–75.19.01–2001

C

5 6 B

5 6 C

0 0 6 6 B B C

0 7 M C

R 1 C 2 1 P / P F 1

5 7 M C

6 0 1 A

2 7 6 A

2 7 6 A

6 2 2 0 7 7 1 6 6 A A A

1 9 6 A

5 9 1 3 6 9 3 3 6 A A A

1 9 6 A

2 0 F 7 L C

3 F L

5 6

0 6

1 F L B

1 F

2 F

5 5 0 6 7 0 5 9 6 1 3 6 A A A A

0 5 3 A

5 7 6 A

5 7 6 A

0 6 5 9 3 6 A A

2 8 1 A

2 8 1 A

1 . 0 0 l 7 7 C 5 6 7 1 1 3 5 5 5 A A A

B E 3 3 0 0 2 2 A A

5 5 6 A D 6

0 0 6 6

A B

1 . 1 . 2 . l l l C C C 2 2 2 1

5 3 3 6 1 0 0 1 5 2 2 5 A A A A

5 1 5 A

4 4 0 0 2 2 A A

7 7 7 8 8 8 3 3 3 A A A

6 1 5 A

C 4 0 2 A

B C W

2 3 C C C C C C L L W L

B C L

1 1 C C W L

4 5 C C W W

6 1 2 A

2 2 6 2 5 5 1 5 3 3 2 3 A A A A

2 5 3 A

7 2 1 5 2 3 A A

7 7 1 1 2 2 A A

1 . l C 2 6 F F L L 5 0 0 5 1 3 A A

i S i n S M - C C C

1 . 1

0 5 3 A

V i S n M C

3 F L 0 5 3 A

i i i S N N i / 2 / 2 n S M - 1 1 C 2 3 C

2 . 1

2 . l C 6 F L 0 5 3 A

V i S n M C

1 F L

1 F

2 F

0 5 3 A

2 8 1 A

2 8 1 A

i i i S N N i / 2 / 2 n S M - 1 1 C C 2 3 C

i S i n S M - C C C

o M 2 / 1 C

3 . 1

4 . 1

5 . 1


o M 2 / 1 C

o M 2 / 1 r C 2 / 1

6 . 1

o M 2 / 1 r C 1

o o M o M 2 / 4 / M 1 3 r / r o 2 1 C C M r 2 i 2 / N / C 1 - / 2 1 4 - / i C 1 N 3

7 . 1

ISA–75.19.01–2001

r a l u b u T

— 14 —

e d a r G

R R C 2 C 4 R 1 4 / 1 1 / 2 2 1 2 C 1 1 P 1 2 2 1 P P 1 P F 1 P F 2 P F

c . 1 5 9 1 5 9 1 5 9 e o 9 3 6 9 3 6 9 5 6 p S N 6 3 3 6 3 3 6 3 3

A A A A A A A A A

) d ’ t n o c ( s l a i r e t a m 1 p u o r G – s n o i t a c i f i c e p s l a i r e t a m f o t s i L — 2 e l b a T

s r a B

e d a r G

c . e o p S N



s e t a l P

e d a r G

c . e o p S N

s g n i t s a C

p . u o o r N G

1 5 5 9 9 3 3 6 6 3 3 3 A A A A

5 3 3 A

2 2 . l . l C C 2 1 1 1 1 1 F F B

3 . l C 2 2 2 2 F B

1 2 F

a 1 5 5 9 9 F F F F

2 2 9 8 8 3 1 1 7 A A A

2 9 8 3 1 7 A A

2 8 1 A

2 2 8 8 1 1 A A

2 8 1 A

1 . l C 2 2

2 . l C 1 1

2 . l C 2 2

2 . B l C 2 . l 1 & 2 A C D C

1 . 2 . l l C C 5 5

2 . l C 1 9

7 8 3 A

7 8 3 A

7 8 3 A

7 8 3 A

7 8 3 A

7 2 2 2 7 8 0 0 0 3 3 3 3 3 5 A A A A A

7 7 8 8 3 3 A A

7 8 3 A

e d a r G

e d a r G

o M 2 / 1 r C 1

i S o M 2 / 1 r C 4 / 1 1

8 . 1

o M 1 r C 4 / 1 2

6 C W

9 C W

5 C

A 2 2 1 1 C C

7 1 2 A

7 1 2 A

7 1 2 A

7 1 2 A

7 1 2 A

2 2 . l . l C C 2 1 1 1 F F

3 . l C 2 2 F

1 2 F

a 1 5 5 9 9 F F F F

2 2 8 8 1 1 A A

2 8 1 A

2 8 1 A

2 2 8 8 1 1 A A

2 8 1 A

2 8 1 A

i S o o M M 2 / 2 o / 1 M - 1 r 2 r / C C 1 r 4 / 4 / C 1 1 1 1 1

o M 1 r C 4 / 1 2

i i N N 2 / 4 / 1 3 o o M o o i M M 2 M S / 2 2 / 1 - 1 / n 1 1 r - - C n n n M 3 M M M C

o M 2 / 1 r C 5

o M 1 r C 9

V o M 1 r C 9

9 . 1

0 1 . 1

1 1 . 1

3 1 . 1

4 5 1 . 1 . 1 1

o M 2 / 1 r C 5 2 1 . 1

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


2 8 1 A

1 . l C 1 1

c . e o p S N

n l i o a t n i a n g l m o i s a i N e r e D t a M

1 9 P

2 . l C 2 1

c . e o p S N

s g n i g r o F

R 5 b C 5 P 5 5 P F F


i S o M 2 / 1 r C 5

— 15 —

r a l u b u T

e d a r G

H H H 4 4 4 4 4 4 0 0 0 0 0 0 3 3 4 3 3 3 3 P P P P P 0 P T T 3 T T F F

H H H 6 6 6 6 6 6 1 1 1 1 1 1 3 3 6 3 3 3 3 P P P P P 1 P T T 3 T T F F

7 1 3 P T

L 4 0 3 P T

L 6 1 3 P T

H H H 1 1 1 1 1 1 2 2 2 2 2 2 3 3 1 3 3 3 3 P P 2 P P P P T T 3 T T F F

c . 2 2 8 6 6 0 0 e o 1 1 5 7 7 3 3 p S N 3 3 3 3 3 4 4

2 2 8 6 6 0 0 1 1 5 7 7 3 3 3 3 3 3 3 4 4 A A A A A A A

2 1 3 A

2 1 3 A

2 1 3 A

2 2 8 6 6 0 0 1 1 5 7 7 3 3 3 3 3 3 3 4 4 A A A A A A A

A A A A A A A

s r a B


e d a r G

c . e o p S N



s e t a l P

e d a r G

c . e o p S N

s g n i t s a C

e d a r G

c . e o p S N

s g n i g r o F

e d a r G

c . e o p S N

n l i o a t n a i n g i l m o a N s i e r e D t a M

p . u o o r N G

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


ISA–75.19.01–2001

H 4 4 H 0 0 4 4 3 3 0 0 F F 3 3

H 6 6 H 1 1 6 6 3 3 1 1 F F 3 3

L L 4 L 6 L 0 4 1 6 3 0 3 1 F 3 F 3

H 1 1 H 2 1 2 1 3 2 3 2 F 3 F 3

2 2 9 9 8 8 7 7 1 1 4 4 A A A A

2 2 9 9 8 8 7 7 1 1 4 4 A A A A

2 9 2 9 8 7 8 7 1 4 1 4 A A A A

2 9 2 9 8 7 8 7 1 4 1 4 A A A A

H 4 4 0 0 3 3

H 6 6 1 1 3 3

7 1 3

L 4 0 3

L 6 1 3

H 1 1 2 2 3 3

0 0 4 4 2 2 A A

0 0 4 4 2 2 A A

0 4 2 A

0 4 2 A

0 4 2 A

0 0 4 4 2 2 A A

3 8 F F C C

A A 3 8 F F C C

M M M 3 8 8 F F G C C C

1 1 5 5 3 3 A A

1 1 5 5 3 3 A A

1 1 1 5 5 5 3 3 3 A A A

H 4 4 0 0 3 3 F F

H 6 6 1 1 3 3 F F

L 4 0 3 F

L 6 1 3 F

H 1 1 2 2 3 3 F F

2 2 8 8 1 1 A A

2 2 8 8 1 1 A A

2 8 1 A

2 8 1 A

2 2 8 8 1 1 A A

i N 8 r C 8 1

o M 2 i N 2 1 r C 6 1

i T i N 0 1 r C 8 1

i N 8 r C 8 1

1 . 2

o M 2 i N 2 1 r C 6 1

i N 8 r C 8 1

2 . 2

o o M M 3 2 i i N N 3 2 1 1 r r C C 8 6 1 1

o M 3 i N 0 1 r C 9 1

3 . 2


4 . 2

ISA–75.19.01–2001

r a l u b u T

— 16 —

e d a r G

H H H H 7 7 7 7 7 8 7 7 8 8 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 3 P P P P P P P P P P T T T T T F F F T T

c . 2 2 8 6 6 6 0 0 2 2 e o 1 1 5 7 7 7 3 3 1 1 p S N 3 3 3 3 3 3 4 4 3 3

A A A A A A A A A A


s r a B

e d a r G

c . e o p S N



s e t a l P

e d a r G

c . e o p S N

s g n i t s a C

e d a r G

c . e o p S N

s g n i g r o F

e d a r G

c . e o p S N


p . u o o r N G

H 9 0 H 3 9 P 0 T 3

H 0 1 3 P T

H 0 1 3

4 4 3 3 0 0 5 5 0 0 5 5 2 2 8 8 7 7 1 1 1 1 2 2 3 3 3 3 3 3 S S S S S S

0 0 6 6 7 7 2 2 3 3 S S

2 8 1 5 3 3 A A

2 1 3 A

8 5 3 A

2 8 9 0 9 0 1 5 8 9 8 9 3 3 7 7 7 7 A A A A A A

9 0 8 9 7 7 A A

H H 7 7 8 8 7 4 4 4 4 4 3 3 3 3 3 F F F F F

H H 7 8 8 4 4 4 3 3 3 F F F

H 0 H S 1 0 0 3 1 1 F 3 3

2 2 2 2 9 8 8 8 8 7 1 1 1 1 4 A A A A A

9 9 9 7 7 7 4 4 4 A A A

2 9 9 8 7 7 1 4 4 A A A

4 3 5 0 2 8 1 1 3 3 S S 9 9 7 7 4 4 A A

9 7 4 A

H H 7 7 8 8 4 4 4 4 3 3 3 3

S H 9 9 0 0 3 3

S H 0 0 1 1 3 3

4 5 2 1 3 S

3 0 8 1 3 S

0 5 7 2 3 S

0 6 7 2 3 S . r G

0 0 0 0 4 4 4 4 2 2 2 2 A A A A

0 0 4 4 2 2 A A

0 0 4 4 2 2 A A

0 4 2 A

0 4 2 A

0 4 2 A

0 4 2 A

N u C M 3 K C

C 8 F C

0 8 2 H H C C

0 2 K C

1 5 3 A

1 1 5 5 3 3 A A

1 5 3 A

u N C u N M C M 8 4 W E D M C C 3 . . r . D r r G G G C

1 5 3 A

1 1 1 5 5 5 3 3 3 A A A

H H 7 7 8 8 4 4 4 4 3 3 3 3 F F F F

H 0 1 3 F

4 1 3 4 5 5 F F F

5 5 F . r G

2 2 2 2 8 8 8 8 1 1 1 1 A A A A

2 8 1 A

2 8 1 A

2 8 1 A

b C i N 0 1 r C 8 1

5 . 2

i N 2 1 r C 5 2

i N 2 1 r C 3 2

6 . 2

i N 0 2 r C 5 2

o M 6 i N 8 1 r C 0 2

2 8 1 A

N o M 3 i N 5 r C 2 2

2 8 1 A

N o M 4 i N 7 r C 5 2

7 . 2 --`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


0 5 7 2 3 S


W b u C - C u W N V C - 2 o o - o M M o M 5 4 M . 5 . i 2 3 3 i i i N 0 N N N 1 5 7 7 r r r r C C C C 4 5 5 5 2 2 2 2

8 . 2

— 17 —

r a l u b u T

e d a r G

0 0 2 2 0 0 8 8 0 0 N N

0 0 0 0 2 2 2 2 0 0 N N

c . 4 8 1 3 e o 6 6 6 6 p S N 4 4 1 1

B B B B

s r a B


e d a r G

c . e o p S N



s e t a l P

e d a r G

c . e o p S N

s g n i t s a C

ISA–75.19.01–2001

0 0 0 0 4 4 4 4 0 0 N N

0 0 0 0 6 6 6 6 0 0 N N

0 8 8 0 0 N

5 6 6 0 1 N

6 7 2 0 1 N

1 0 0 0 1 N

5 5 5 2 4 8 6 8 0 0 N N

5 3 6 6 1 1 B B

7 3 6 6 1 1 B B

3 6 1 B

2 2 6 B

2 2 6 B

2 2 6 B

2 3 2 2 6 4 B B

0 2 0 8 0 N

0 0 2 2 0 N

1 0 2 2 0 N

0 0 4 4 0 N

5 0 4 4 0 N

0 0 6 6 0 N

0 0 8 8 0 N

5 6 6 0 1 N

6 5 1 3 5 5 7 2 0 0 5 2 2 6 0 0 4 8 0 6 0 0 6 8 1 0 1 1 0 0 N N N N N N

3 7 4 B

0 6 1 B

0 6 1 B

4 6 1 B

4 6 1 B

6 6 1 B

8 0 4 B

5 3 3 B

4 6 5 3 4 5 7 4 3 7 7 2 5 4 3 5 5 4 B B B B B B

0 2 0 8 0 N

0 0 2 2 0 N

1 0 2 2 0 N

0 0 4 4 0 N

0 0 6 6 0 N

0 0 8 8 O N

5 6 6 0 1 N

6 5 1 3 5 5 7 2 0 0 5 2 2 6 0 0 4 8 0 6 0 0 6 8 1 0 1 1 0 0 N N N N N N

3 6 4 B

2 6 1 B

2 6 1 B

7 2 1 B

8 6 1 B

9 0 4 B

3 3 3 B

5 3 3 4 5 4 7 4 3 3 7 2 5 4 3 4 5 4 B B B B B B

0 2 0 8 0 N

0 0 2 2 0 N

1 0 2 2 0 N

0 0 4 4 0 N

5 0 4 4 0 N

0 0 6 6 0 N

0 0 8 8 0 N

5 6 6 0 1 N

6 5 1 3 5 5 7 2 0 0 5 2 2 6 0 0 4 8 0 6 0 0 6 8 1 0 1 1 0 0 N N N N N N

2 6 4 B

0 6 1 B

0 6 1 B

4 6 5 B

4 6 5 B

4 6 5 B

4 6 5 B

5 3 3 B

4 4 5 3 4 5 6 6 3 7 7 2 5 5 3 5 5 4 B B B B B B

e F 2 o M 8 2 i N 5 6

u C b . C e 3 5 . F 2 r 3 - 5 - r o C o e r C M 5 M F C 6 3 1 5 7 1 r - 9 o r o o o C 5 M C M M M . 6 2 8 6 6 1 1 2 2 1 1 - 2 i i i i i i N N N N N N 4 0 2 0 1 2 5 6 6 7 6 4

e d a r G

c . e o p S N

s g n i g r o F

e d a r G

c . e o p S N



b C r C 0 2 e F 5 3 i N 5 3

1 . 3

i N 9 9

C w o L i N 9 9

2 . 3

3 . 3

u C 0 3 i N 7 6

S u C 0 3 i N 7 6

4 . 3

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---

e F 8 r C 5 1 i N 2 7

r C 1 2 e F 2 4 i N 3 3

5 . 3

6 . 7 . 3 3

8 . 3


ISA–75.19.01–2001

r a l u b u T

— 18 —

e d a r G

2 0 0 6 0 N

4 0 9 8 0 N

0 5 2 8 3 9 8 6 0 0 N N

5 1 7 3 9 0 6 8 0 0 N N

7 0 0 6 0 N

0 1 8 8 0 N

0 3 3 8 0 N

7 7 6 B

2 2 2 2 6 6 B B

2 2 2 2 6 6 B B

2 2 6 B

7 0 4 B

5 3 5 B

4 0 9 8 0 N

0 5 2 8 3 9 8 6 0 0 N N

5 1 7 3 9 0 6 8 0 0 N N

7 0 0 6 0 N

0 1 8 8 0 N

0 3 3 8 0 N

c . 2 2 9 1 1 1 9 1 e o 7 7 4 2 8 8 4 8 p S N 5 6 6 6 5 5 6 5

B B B B B B B B

8 0 4 B

1 1 5 B

2 0 0 6 0 N

0 1 8 8 0 N

0 3 3 8 0 N

9 0 4 B

6 3 5 B

c . 2 e o 2 p S N 6

B


s r a B



s e t a l P

e d a r G

e d a r G

2 0 0 6 0 N

0 0 7 8 0 N

0 0 7 8 0 N

4 0 9 8 0 N

0 5 2 8 3 9 8 6 0 0 N N

5 1 7 3 9 0 6 8 0 0 N N

7 0 0 6 0 N

c . 5 9 5 0 2 2 5 2 e o 3 9 2 2 8 8 2 8 p S N 4 5 6 6 5 5 6 5

B B B B B B B B

s g n i t s a C

s g n i g r o F

e d a r G

W M V 2 M 2 1 1 - W N C

M 7 N C

c . e o p S N

4 4 9 9 4 4 A A

1 5 3 A

e d a r G

2 0 0 6 0 N

0 0 7 8 0 N

4 0 9 8 0 N

0 5 2 8 3 9 8 6 0 0 N N

5 1 7 3 9 0 6 8 0 0 N N

7 0 0 6 0 N

c . 2 2 9 1 1 1 4 1 e o 7 7 4 2 8 8 6 8 p 5 6 6 6 5 5 5 5 S N

B B B B B B B B



` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

e F 8 1 o M 9 r C 2 2 i N 7 4

o M 5 r C 1 2 e F 7 4 i N 5 2

o M r C 1 2 i N 5 2 e F 4 4

0 1 9 . 1 . . 1 3 3 3

0 1 8 8 0 N 4 6 5 B

o o M M 5 7 r e C 2 F 0 2 - 2 r e F C 3 2 4 - 2 i i N N 6 7 2 4

C o w M o 6 - L e u F C 8 o 1 r M C r 5 C 2 i e F N 9 i 4 N

o M 6 e F 9 1 r C 2 2 i N 7 4

r C 1 2 - r e F C 2 - o o i M M N - i 3 i 3 N N

2 1 . 3

3 1 . 3

4 1 . 3

5 1 . 3

0 3 3 8 0 N 1 1 5 B

i S 4 / 1 1 r C 9 1 i N 5 3

o M 5 . 2 u C 5 . 3 r C 5 . 0 2 i N 9 2

6 7 1 . 1 . 3 3


— 19 —

4 3 . 6 1 B E M S A r e p s y o l l a r e h t o d n a e s a b l e k c i n , l e e t s – ) 3 ( ) g i s p ( s e r u s s e r p t s e t l l e h s c i t a t s o r d y H — 5 e l b a T

0 0 5 4 s s a l C

0 0 5 2 s s a l C

0 0 5 1 s s a l C

0 0 9 s s a l C

0 0 6 s s a l C

0 0 4 s s a l C

0 0 3 s s a l C

0 5 1 s s a l C

l a p i r u ) e o 2 t r ( a G M

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

0 5 4 5 1

5 7 8 6 1

5 7 8 6 1

5 2 6 5 1

5 2 6 5 1

5 7 8 6 1

5 5 5 0 5 5 5 0 5 5 5 0 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

0 0 2 6 1

0 0 2 6 1

0 0 5 3 1

0 0 2 6 1

0 0 2 6 1

5 2 1 5 1

5 2 1 5 1

5 7 8 6 1

l c p S

5 7 3 9

5 7 3 9

0 0 7 8

0 5 0 8

0 0 7 8

0 5 3 7

5 7 3 9

0 5 0 8

5 7 3 9

5 7 3 9

5 7 3 9

0 5 0 8

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 8

5 7 3 9

5 7 3 9

0 0 7 8

0 0 7 8

5 7 3 9

d t S

5 7 2 9

5 7 3 9

0 0 7 8

5 2 7 7

0 0 7 8

0 5 3 7

5 7 3 9

5 2 7 7

5 7 3 9

5 7 3 9

5 7 3 9

5 2 7 7

5 7 3 9

5 7 3 9

5 7 3 9

0 0 0 9

0 0 0 9

0 0 5 7

0 0 0 9

0 0 0 9

0 0 4 8

0 0 4 8

5 7 3 9

l c p S

5 2 6 5

5 2 6 5

5 2 2 5

5 2 8 4

5 2 2 5

5 2 4 4

5 2 6 5

5 2 8 4

5 2 6 5

5 2 6 5

5 2 6 5

5 2 8 4

5 2 6 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 0 5

5 2 6 5

5 2 6 5

5 2 2 5

5 2 2 5

5 2 6 5

d t S

5 7 5 5

5 2 6 5

5 2 2 5

0 5 6 4

5 2 2 5

5 2 4 4

5 2 6 5

0 5 6 4

5 2 6 5

5 2 6 5

5 2 6 5

0 5 6 4

5 2 6 5

5 2 6 5

5 2 6 5

0 0 4 5

0 0 4 5

0 0 5 4

0 0 4 5

0 0 4 5

0 5 0 5

0 5 0 5

5 2 6 5

l c p S

5 7 3 3

5 7 3 3

0 5 1 3

0 0 9 2

0 5 1 3

0 5 6 2

5 7 3 3

0 0 9 2

5 7 3 3

5 7 3 3

5 7 3 3

0 0 9 2

5 7 3 3

5 7 3 3

5 7 3 3

5 7 3 3

5 7 3 3

5 2 0 3

5 7 3 3

5 7 3 3

0 5 1 3

0 5 1 3

5 7 3 3

d t S

0 5 3 3

5 7 3 3

0 5 1 3

5 7 7 2

0 5 1 3

0 5 6 2

5 7 3 3

5 7 7 2

5 7 3 3

5 7 3 3

5 7 3 3

5 7 7 2

5 7 3 3

5 7 3 3

5 7 3 3

0 5 2 3

0 5 2 3

0 0 7 2

0 5 2 3

0 5 2 3

5 2 0 3

5 2 0 3

5 7 3 3

l c p S

0 5 2 2

0 5 2 2

0 0 1 2

0 5 9 1

0 0 1 2

5 7 7 1

0 5 2 2

0 5 9 1

0 5 2 2

0 5 2 2

0 5 2 2

0 5 9 1

0 5 2 2

0 5 2 2

0 5 2 2

0 5 2 2

0 5 2 2

5 2 0 2

0 5 2 2

0 5 2 2

0 0 1 2

0 0 1 2

0 5 2 2

d t S

5 2 2 2

0 5 2 2

0 0 1 2

5 7 8 1

0 0 1 2

5 7 7 1

0 5 2 2

5 7 8 1

0 5 2 2

0 5 2 2

0 5 2 2

5 7 8 1

0 5 2 2

0 5 2 2

0 5 2 2

5 7 1 2

5 7 1 2

0 0 8 1

5 7 1 2

5 7 1 2

5 2 0 2

5 2 0 2

0 5 2 2

l c p S

0 0 5 1

0 0 5 1

0 0 4 1

0 0 3 1

0 0 4 1

0 0 2 1

0 0 5 1

0 0 3 1

0 0 5 1

0 0 5 1

0 0 5 1

0 0 3 1

0 0 5 1

0 0 5 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 3 1

0 0 5 1

0 0 5 1

0 0 4 1

0 0 4 1

0 0 5 1

d t S

0 0 5 1

0 0 5 1

0 0 4 1

0 5 2 1

0 0 4 1

0 0 2 1

0 0 5 1

0 5 2 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 2 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 4 1

0 5 4 1

0 0 2 1

0 5 4 1

0 5 4 1

0 5 3 1

0 5 3 1

0 0 5 1

l c p S

5 2 1 1

5 2 1 1

0 5 0 0 5 7 5 0 0 9 0 9 1 1

5 5 5 5 5 5 5 5 5 2 7 2 2 2 7 2 2 2 1 9 1 1 1 9 1 1 1 1 1 1 1 1 1 1

5 2 1 1

5 2 1 1

5 2 0 1

5 2 1 1

5 2 1 1

0 5 0 1

0 5 0 1

5 2 1 1

d t S

5 2 1 1

5 2 1 1

0 0 0 0 5 5 5 0 0 9 0 9 1 1

5 0 5 5 5 0 5 5 5 2 5 2 2 2 5 2 2 2 1 9 1 1 1 9 1 1 1 1 1 1 1 1 1 1

0 0 1 1

0 0 0 0 5 0 0 0 0 2 1 9 1 1 0 1 1 1 1

5 2 0 1

5 2 1 1

l c p S

5 7 8 6 1

5 7 8 6 1

5 2 6 5 1

5 7 4 4 1

5 2 6 5 1

5 2 2 3 1

5 7 8 6 1

5 7 4 4 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

ISA–75.19.01–2001

5 7 4 4 1

5 7 8 6 1

5 7 8 6 1

7 2 0 2 2 7 0 7 7 7 0 7 7 7 d t 7 6 8 6 9 6 2 8 9 8 8 8 9 8 8 8 S 6 6 5 3 5 3 6 3 6 6 6 3 6 6 6

) 1 ( 0 0 0 5 0 0 0 5 0 0 0 5 0 0 0 l 5 5 0 7 0 5 5 7 5 5 5 7 5 5 5 c 4 4 4 3 4 3 4 3 4 4 4 3 4 4 4 p S

0 0 0 0 0 0 0 0 5 5 0 5 5 0 0 5 4 4 4 4 4 4 4 4

) 1 ( 0 0 0 5 0 0 0 5 0 0 0 5 0 0 0 5 5 0 7 0 5 5 7 5 5 5 7 5 5 5 d t 4 4 4 3 4 3 4 3 4 4 4 3 4 4 4 S

5 5 0 5 5 0 0 0 2 2 5 2 2 0 0 5 4 4 3 4 4 4 4 4

0 1 2 3 4 5 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1 . 1 . 1 . 1 . 1 . 1 . 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 2 2 2 2 2 2 2 2



` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

ISA–75.19.01–2001

) d ’ t n o c ( 4 3 . 6 1 B E M S A r e p s y o l l a r e h t o d n a e s a b l e k c i n , l e e t s – ) 3 ( ) g i s p ( s e r u s s e r p t s e t l l e h s c i t a t s o r d y H — 5 e l b a T

0 0 5 4 s s a l C

0 0 5 2 s s a l C

0 0 5 1 s s a l C

0 0 9 s s a l C

0 0 6 s s a l C

0 0 4 s s a l C

0 0 3 s s a l C

0 5 1 s s a l C

— 20 —

l c p S

0 5 0 5 1

0 5 0 9

0 5 0 6

5 7 0 5 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

0 0 1 6 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

5 7 0 5 1

5 7 8 6 1

0 5 9 4 1

d t S

0 0 5 3 1

0 0 1 8

0 0 4 5

0 0 5 3 1

0 0 2 6 1

0 0 2 6 1

5 7 8 6 1

5 7 8 6 1

5 7 8 6 1

0 0 2 6 1

5 2 4 4 1

5 2 1 5 1

5 7 8 6 1

0 0 2 6 1

0 0 5 3 1

0 0 2 6 1

0 0 5 3 1

l c p S

5 7 3 8

5 2 0 5

0 5 3 3

5 7 3 8

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 9

0 5 9 8

5 7 3 9

5 7 3 9

5 7 3 9

5 7 3 8

5 7 3 9

5 2 3 8

d t S

0 0 5 7

0 0 5 4

0 0 0 3

0 0 5 7

0 0 0 9

0 0 0 9

5 7 3 9

5 7 3 9

5 7 3 9

0 0 0 9

5 2 0 8

0 0 4 8

5 7 3 9

0 0 0 9

0 0 5 7

0 0 0 9

0 0 5 7

l c p S

5 2 0 5

5 2 0 3

5 2 0 2

5 2 0 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 6 5

5 7 3 5

5 2 6 5

5 2 6 5

5 2 6 5

5 2 0 5

5 2 6 5

0 0 0 5

d t S

0 0 5 4

0 0 7 2

0 0 8 1

0 0 5 4

0 0 4 5

0 0 4 5

5 2 6 5

5 2 6 5

5 2 6 5

0 0 4 5

5 2 8 4

0 5 0 5

5 2 6 5

0 0 4 5

0 0 5 4

0 0 4 5

0 0 5 4

l c p S

5 2 0 3

5 2 8 1

5 2 2 1

5 2 0 3

5 7 3 3

5 7 3 3

5 7 3 3

5 7 3 3

5 7 3 3

5 7 3 3

5 2 2 3

5 7 3 3

5 7 3 3

5 7 3 3

5 2 0 3

5 7 3 3

0 0 0 3

d t S

0 0 7 2

5 2 6 1

0 0 1 1

0 0 7 2

0 5 2 3

0 5 2 3

5 7 3 3

5 7 3 3

5 7 3 3

0 5 2 3

0 0 9 2

5 2 0 3

5 7 3 3

0 5 2 3

0 0 7 2

0 5 2 3

0 0 7 2

l c p S

5 2 0 2

5 5 5 0 0 2 2 2 5 5 2 8 0 2 2 1 2 2 2

0 5 2 2

0 5 2 2

0 5 2 2

0 5 2 2

0 5 1 2

0 5 2 2

0 5 2 2

0 5 2 2

5 2 0 2

0 5 2 2

0 0 0 2

d t S

0 0 8 1

0 5 0 5 0 2 0 7 1 7 8 1 1 1 2

5 7 1 2

0 5 2 2

0 5 2 2

0 5 2 2

5 7 1 2

5 2 9 1

5 2 0 2

0 5 2 2

5 7 1 2

0 0 8 1

5 7 1 2

0 0 8 1

l c p S

0 5 0 0 0 5 2 5 5 0 3 8 5 3 5 1 1 1

0 0 5 1

0 0 5 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 4 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 3 1

0 0 5 1

0 5 3 1

d t S

0 5 0 0 0 0 2 0 0 5 2 7 5 2 4 1 1 1

0 5 4 1

0 0 5 1

0 0 5 1

0 0 5 1

0 5 4 1

0 0 3 1

0 5 3 1

0 0 5 1

0 5 4 1

0 0 2 1

0 5 4 1

0 0 2 1

l c p S

5 0 5 5 5 2 0 2 2 2 0 6 4 0 1 1 1 1

5 2 1 1

5 2 1 1

5 2 1 1

5 2 1 1

5 2 1 1

5 7 0 1

5 2 1 1

5 2 1 1

5 2 1 1

5 2 0 1

5 2 1 1

0 0 0 1

d t S

0 0 5 0 0 5 7 0 9 5 3 9

0 0 1 1

0 0 1 1

5 2 1 1

5 2 1 1

5 2 1 1

0 5 5 5 0 0 0 0 0 7 2 2 0 0 0 0 1 9 0 1 1 9 1 9 1 1 1 1 1

l 0 5 0 0 0 0 0 0 0 5 0 0 0 0 0 0 c ) 0 1 0 5 7 0 5 5 5 5 5 5 2 5 5 5 0 5 0 p ( 4 2 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 S ) 1 ( d t S

l a p i r u ) e o ( t r 2 a G M


0 5 0 0 5 5 0 0 0 5 5 0 0 5 0 5 0 5 2 5 5 2 2 5 5 5 2 7 0 5 2 5 2 5 3 2 1 3 4 4 4 4 4 4 3 4 4 4 3 4 3

0 1 2 3 4 5 6 7 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1 . 1 . 1 . 1 . 1 . 1 . 1 . 1 . 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3


` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

. 4 3 . 6 1 B . E 4 M 3 . S 6 A 1 B s i E . e c M 1 r S l e u o A b e t a S e . y s i n l " n , l d o c e e p i n c S " f e n d d e r n e f e a r r " a e d r t s o p f S " u d f o e o r g t s n l i l a o i i r t i e e n t r i f a a s e d m e u r e l o h a F T V

— — — 1 2 3 E E E T T T O O O N N N

— 21 —

0 0 8 s s a l C

s e v l a v n o r i t s a c – ) g i s p ( ) s 1 ( e r 1 . u 6 s 1 s e r B p E t M s S e A t l l r e e h p s c i t a t s o r d y H — 6 e l b a T

B s s a l C

B s s a l 0 C 5 2 s s a l C

2 1 2

0 0 2 1

8 4 0 3

0 5 4

4 2 4 1

0 5 4

2 1 1

0 5 7

2 1 1

0 0 6

8 4 0 3

0 3 2

4 2 4 1

0 3 2

2 1 1

0 0 3

2 1 1

0 7 2

6 9 5 A 2 2 4

0 4

6 3 4

0 7

A s s a l C

B s s a l 5 C 2 1 s s a l C

A s s a l C

s s a l C

s s a l C

. 6 2 1 A M T S A r e p e b o t l a i r e t a m t e n n o b d n a y d o B

— 1 E T O N

s e v l a v n o r i e l i t c u d – ) g i s ) p 1 ( ( s 2 e r 4 . u 6 s 1 s B e r E p t M s S e A t l l r e e h p s c i t a t s o r d y H — 7 e l b a T

0 0 3 5 s 7 s 9 a l C

0 5 1 0 s 0 s 4 a l C

ISA–75.19.01–2001


— 1 E T O N

) S P N ( s e z i S

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---




` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -



— 23 —

) r a B ( s e r u s s e r P t s e T — A x e n n A

4 3 . 6 1 B E M S A r e . p 1 s 0 y 0 o 2 – l l 1 0 a . r 9 . e 1 h 7 t 5 – o A d S n I a f o r e t s a p a l b r - a l g e t e k i c n i n n a , i s l , e e e c t s n e – i ) n e 3 ( v n ) o e c r g f o u t a x e g t r i a n a b ( m e s h t e r r e u t s f a s d e r e p c a t l s p s e i t l c l h e i h h w , s x c e i t n a n a t s s i o h r d T y H — 1 . A e l b a T

0 0 5 4 s s a l C

0 0 5 2 s s a l C

0 0 5 1 s s a l C

0 0 9 s s a l C

0 0 6 s s a l C

0 0 4 s s a l C

0 0 3 s s a l C

0 5 1 s s a l C

l a p i r u ) e o 2 t r ( a G M

l 4 4 8 8 8 2 4 8 4 4 4 8 4 4 4 4 4 6 4 4 8 8 4 c 6 6 7 9 7 1 6 9 6 6 6 9 6 6 6 6 6 6 6 6 7 7 6 p 0 1 0 1 1 1 1 1 1 1 1 1 0 1 1 0 0 1 S 1 1 1 1 9 1 9 1 9 1 1 1 9 1 1 1 1 1 1 1 1 1 1 1 0 4 8 8 8 2 4 8 4 4 4 8 4 4 4 7 7 1 7 7 3 3 4 d 6 7 5 7 1 6 5 6 6 6 5 6 6 6 1 1 3 1 1 4 4 6 t 5 0 1 1 0 0 1 1 0 1 1 1 1 1 1 1 1 1 S 1 1 1 1 9 1 9 1 9 1 1 1 9 1 1 1 1 1 9 1 1 1 1 1

l 7 7 9 5 9 7 7 5 7 7 7 5 7 7 7 7 7 7 7 7 9 9 7 c 4 4 9 5 9 0 4 5 4 4 4 5 4 4 4 4 4 7 4 4 9 9 4 p S 6 6 5 5 5 5 6 5 6 6 6 5 6 6 6 6 6 5 6 6 5 5 6 7 9 3 9 7 7 3 7 7 7 3 7 7 7 1 1 8 1 1 0 0 7 d 9 t 3 4 9 3 9 0 4 3 4 4 4 3 4 4 4 2 2 1 2 2 8 8 4 S 6 6 5 5 5 5 6 5 6 6 6 5 6 6 6 6 6 5 6 6 5 5 6

l 8 8 9 3 9 4 8 3 8 8 8 3 8 8 8 8 8 6 8 8 9 9 8 c 8 8 5 3 5 0 8 3 8 8 8 3 8 8 8 8 8 4 8 8 5 5 8 p S 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 8 9 0 9 4 8 0 8 8 8 0 8 8 8 3 3 1 3 3 8 8 8 d t 4 8 8 5 2 5 0 8 2 8 8 8 2 8 8 8 7 7 1 7 7 4 4 8 S 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

l 3 3 6 0 6 3 3 0 3 3 3 0 3 3 3 3 3 8 3 3 6 6 3 c 3 3 1 0 1 8 3 0 3 3 3 0 3 3 3 3 3 0 3 3 1 1 3 p S 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 6 2 6 3 3 2 3 3 3 2 3 3 3 4 4 7 4 4 9 9 3 d t 0 3 3 1 9 1 8 3 9 3 3 3 9 3 3 3 2 2 8 2 2 0 0 3 S 2 2 2 1 2 1 2 1 2 2 2 1 2 2 2 2 2 1 2 2 2 2 2

l 6 6 4 3 4 2 6 3 6 6 6 3 6 6 6 6 6 9 6 6 4 4 6 c 5 5 4 3 4 2 5 3 5 5 5 3 5 5 5 5 5 3 5 5 4 4 5 p S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 4 8 4 2 6 8 6 6 6 8 6 6 6 9 9 5 9 9 0 0 6 d t 4 5 5 4 2 4 2 5 2 5 5 5 2 5 5 5 4 4 2 4 4 4 4 5 S 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

l 4 4 4 4 9 4 4 4 4 4 3 4 4 6 6 4 c 0 0 6 9 6 2 4 9 4 0 0 8 0 0 0 0 0 9 0 0 9 9 0 p 1 1 9 8 9 8 0 8 0 1 1 1 1 1 1 1 1 1 1 1 1 S

4 4 4 4 4 4 4 4 0 0 0 0 4 d 3 t 0 0 6 6 6 2 0 6 0 0 0 6 0 0 0 0 0 3 0 0 3 3 0 S 1 1 9 8 9 8 1 8 1 1 1 8 1 1 1 1 1 8 1 1 9 9 1

l c 8 8 2 7 2 2 8 7 8 8 8 7 8 8 8 8 8 0 8 8 2 2 8 p 7 7 7 6 7 6 7 6 7 7 7 6 7 7 7 7 7 7 7 7 7 7 7 S d 8 2 5 2 2 8 5 8 8 8 5 8 8 8 5 5 3 5 5 0 0 8 t 7 S 7 7 7 6 7 6 7 6 7 7 7 6 7 7 7 7 7 6 7 7 7 7 7 ) 1 ( l 0 0 8 6 8 4 0 6 0 0 0 6 0 0 0 0 0 7 0 0 8 8 0 c 3 3 2 2 2 2 3 2 3 3 3 2 3 3 3 3 3 2 3 3 2 2 3 p S ) 1 ( 0 0 8 5 8 4 0 5 0 0 0 5 0 0 0 9 9 4 9 9 7 7 0 d 3 3 2 2 2 2 3 2 3 3 3 2 3 3 3 2 2 2 2 2 2 2 3 t S

0 1 2 3 4 5 1 2 3 4 5 6 7 8 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1 . 1 . 1 . 1 . 1 . 1 . . . . . . . . . 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


ISA–75.19.01–2001


ISA–75.19.01–2001

0 0 5 4 s s a l C

s y o l l a r e h t o d n a e s a b l e k c i n , l e e t s – ) ) d ' 3 ( t ) n e o c g ( u 4 a 3 g . r 6 a 1 b ( B s E S e r M u A s s r e r e p p t s e t l l e h s c i t a t s o r d y H — 1 . A e l b a T

. 1 0 0 2 – 1 0 . 9 1 . 5 7 – A S I f o t r a p l a r g e t n i n a s i , e c n e i n e v n o c r o f t x e t n i a m e h t r e t f a d e c a l p s i h c i h w , x e n n a s i h T

0 0 5 2 s s a l C

0 0 5 1 s s a l C

0 0 9 s s a l C

0 0 6 s s a l C

0 0 4 s s a l C

0 0 3 s s a l C

0 5 1 s s a l C

l a p i r u ) e o ( t r 2 a G M

— 24 —

l c p S

8 4 6 9 3 2 1 3 0 6 4 0 1 1

4 6 1 1

4 6 1 1

4 6 1 1

4 6 1 1

4 6 1 1

4 9 3 1 7 7 4 d 1 6 6 t 3 5 7 3 1 1 1 1 1 S 9 5 3 9 1 1 1 1 1

4 6 1 1

7 4 3 4 7 1 7 1 1 9 4 6 1 3 1 3 1 9 0 1 1 9 1 9 1 1 1 1 1

4 6 1 1

l 7 7 1 8 7 7 7 7 7 7 7 7 7 7 8 7 3 c 7 4 3 7 4 4 4 4 4 4 1 4 4 4 7 4 7 p S 5 3 2 5 6 6 6 6 6 6 6 6 6 6 5 6 5 1 7 8 1 1 7 7 7 1 3 0 7 1 8 1 8 d t 8 1 1 0 1 2 2 4 4 4 2 5 8 4 2 1 2 1 S 5 3 2 5 6 6 6 6 6 6 5 5 6 6 5 6 5

l 6 8 9 7 8 8 8 8 8 8 0 8 8 8 7 8 4 c 4 0 3 4 8 8 8 8 8 8 7 8 8 8 4 8 4 p S 3 2 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7 5 1 3 3 8 8 8 3 2 8 8 3 1 3 1 d t 1 1 8 2 1 7 7 8 8 8 7 3 4 8 7 1 7 1 S 3 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3

l 8 5 3 3 3 3 3 3 2 3 3 3 8 3 7 c 0 2 4 8 3 3 3 3 3 3 2 3 3 3 0 3 0 p 2 1 8 0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 S 2 5 7 4 4 3 3 3 4 9 9 3 4 7 4 7 d t 7 8 8 2 2 3 3 3 2 9 0 3 2 8 2 8 1 7 1 2 2 2 2 2 2 1 2 2 2 1 2 1 S 1 1

l 9 6 6 6 6 6 6 8 6 6 6 9 6 8 c 3 4 6 9 5 5 5 5 5 5 4 5 5 5 3 5 3 p 8 5 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 S 1

5 9 9 6 6 6 9 3 0 6 9 5 9 5 d t 5 2 5 0 2 4 4 5 5 5 4 3 4 5 4 2 4 2 S 1 7 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1

l 4 4 4 4 4 9 4 4 4 3 4 2 c 3 6 7 3 4 0 0 0 0 0 0 0 0 0 p 9 5 3 9 0 1 1 1 1 1 1 9 1 1 1 9 1 9 S

0 4 4 4 0 4 0 0 d 0 4 3 0 t 3 0 0 0 0 0 0 9 3 0 0 3 0 3 S 8 5 3 8 1 1 1 1 1 1 8 9 1 1 8 1 8

l c 0 2 8 0 8 8 8 8 8 8 4 8 8 8 0 8 9 p 7 4 2 7 7 7 7 7 7 7 7 7 7 7 7 7 6 S d 8 5 3 5 5 8 8 8 5 7 0 8 5 3 5 3 t 3 S 6 3 2 6 7 7 7 7 7 7 6 7 7 7 6 7 6 ) 1 ( l 7 7 1 7 0 0 0 0 0 0 9 0 0 0 7 0 7 c 2 1 1 2 3 3 3 3 3 3 2 3 3 3 2 3 2 p S ) 1 ( 4 5 0 4 9 9 0 0 0 9 6 7 0 9 4 9 4 d t 2 1 1 2 2 2 3 3 3 2 2 2 3 2 2 2 2 S

0 1 2 3 4 5 6 7 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1 . 1 . 1 . 1 . 1 . 1 . 1 . 1 . 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 --`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---


4 6 1 1

1 3 0 1

4 6 1 1

0 1 1 1

4 6 1 1

9 3 0 1

4 6 1 1


i s p 8 3 0 5 , 4 1 = a P M 1 , 0 = a P 0 0 0 0 0 1 = a P k 0 0 1 = r a b 1

. 4 3 . 6 1 B . E 4 M 3 . S 6 A 1 B s i E . e c M 1 r S l e u o A b e t a S e . y s i n l " n , l d o c e e p i n c S " f e n d d e r e n e f a r r " a e d s r t o p f S " u d f o e o r g t s n l i l a o i i r t i e e n t r i f a a e m s e d u r e l o h a F T V

— — — 1 2 3 E E E T T T O O O N N N

— 25 —

` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -

) 1 ( 1 . 6 1 B E M S A r e p s e v l a v n o r i t s a c – ) e g u a g r a b ( s e r u s s e r p t s e t l l e h s c i t a t s o r d y H — 2 . A e l b a T

0 0 8 s s a l C

B s s a l C

B s s a 0 l 5 C 2 s s a l C

A s s a l C

B s s a 5 l 2 C 1 s s a l C

A s s a l C

5 2 s s a l C

A s s a l C

2 1 2

3 8

8 4 0 3

1 3

4 2 4 1

1 3

2 1 1

2 5

2 1 1

2 4

8 4 0 3

6 1

4 2 4 1

6 1

2 1 1

1 2

2 1 1

9 1

6 9 2 4

7 , 2

6 3 4

8 , 4

) S P N ( s e z i S



— 1 E T O N

) 1 ( 2 4 . 6 1 B E M S A r e p s e v l a v n o r i e l i t c u d – ) e g u a g r a b ( s e r u s s e r p t s e t l l e h s c i t a t s o r d y H — 3 . A e l b a T

0 0 3 s 8 s 6 a l C

0 5 1 s 8 s 2 a l C

ISA–75.19.01–2001


— 1 E T O N



--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



— 27 —

ISA–75.19.01–2001

Annex B — References This annex is an integral part of this standard. It is placed after the main text for convenience. List of standards and specifications referenced in standards showing the year of approval. AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME B16.1-1998

Cast Iron Flanges and Flanged Fittings, Class 25, 125, and 250

ASME B16.34-1996

Valves - Flanged, Threaded and Welding End

ASME B16.42-1998

Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300

Available from:

ASME 345 East 47th Street New York, NY 10036 Tel: (212) 705-7722

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A105/A105M-98

Standard Specification for Carbon Steel Forgings for Piping Applications

A106-99e1

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A126-95e1

Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

A182/A182M-99

Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A203/A203M-97

Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

A204/A204M-93(1999)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

A216/A216M-93(1998)

Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

A217/A217M-99

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A240/A240M-00

Standard Specification for Heat-Resisting Chromium and ChromiumNickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels

A302/A302M-97e1

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



ISA–75.19.01–2001

` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -

— 28 —

A312/A312M-00

Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes

A335/A335M-99

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A350/A350M-99

Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

A351/A351M-94a(1999)

Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts

A352/A352M-93(1998)

Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A355-89(1994)e1

Standard Specification for Steel Bars, Alloys, for Nitriding

A358/A358M-98

Standard Specification for Electric-Fusion-Welded Austenitic ChromiumNickel Alloy Steel Pipe for High-Temperature Service

A369/A369M-92

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

A376/A376M-98

Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

A387/A387M-99

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A395/A395M-99

Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

A430/A430M-91

Standard Specification for Austenitic Steel Forged and Bored Pipe for High-Temperature Service

A479/A479M-00

Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

A515/A515M-92(1997)

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A516/A516M-90(1996)e1

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A537/A537M-95e2

Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

A672-96

Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

A675/A675M-90a(1995)e1

Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties



— 29 —

ISA–75.19.01–2001

A691-98

Standard Specification for Carbon and Alloy Steel Pipe, Electric-FusionWelded for High-Pressure Service at High Temperatures

A696-90a(1995)e1

Standard Specification for Steel Bars, Carbon, Hot-Wrought or ColdFinished, Special Quality, for Pressure PipingComponents

A739-90a(1995)e1

Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

A789/A789M-00

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A790/A790M-00

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

B127-98

Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

B160-99

Standard Specification for Nickel Rod and Bar

B161-93

Standard Specification for Nickel Seamless Pipe and Tube

B162-99

Standard Specification for Nickel Plate, Sheet, and Strip

B163-98a

Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

B164-98

Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

B165-93

Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

B166-99

Standard Specification for Nickel-Chromium-Iron Alloys (UNSN06600, N06601, N06603, N06690, N06025, and N06045 and Nickel-ChromiumCobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire

B167-98

Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045)* Seamless Pipe and Tube

B168-98

Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045) and Nickel-ChromiumCobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip

B333-98

Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

B335-98

Standard Specification for Nickel-Molybdenum Alloy Rod

B407-96

Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

B408-96

Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar



` , , ` , ` , , ` , , ` ` ` , ` , ` ` ` ` , ` ` , , ` ` ` , , ` ` , ` -

ISA–75.19.01–2001

— 30 —

B409-96a

Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

B424-98a

Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip

B425-99

Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar

B434-00

Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

B435-98a

Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

B443-99

Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Plate, Sheet, and Strip

B444-94

Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625)* Pipe and Tube

B446-98

Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Rod and Bar

B462-97

Standard Specification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, UNS N08367, and UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service

B463-99

Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip

B464-99

Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe

B468-99

Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes

B473-96

Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

B511-98a

Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

B535-99

Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

B536-95

Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

B564-99a

Standard Specification for Nickel Alloy Forgings

B572-98a

Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



— 31 —

ISA–75.19.01–2001

B573-00

Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003, N10242)* Rod

B574-99a

Specification for Low-Carbon Nickel-Molybdenum-Chromium, LowCarbon Nickel-Chromium-Molybdenum, Low-Carbon NickelMolybdenum-Chromium-Tantalum, Low-Carbon Nickel-ChromiumMolybdenum-Copper, Low-Carbon Nickel-Chromium-MolybdenumTungsten Alloy Rod

B575-99a

Spec for Low-Carbon Nickel-Molydbdenum-Chromium, Low-Carbon, Nickel-Chromium-Molybdenum, Low-Carbon Nickel-ChromiumMolybdenum-Copper, Low-Carbon Nickel-Chromium-MolybdenumTantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet and Strip

B581-97

Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

B582-97

Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

B599-92(1997)

Standard Specification for Nickel-Iron-Chromium-MolybdenumColumbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -

B620-98a

Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

B621-95a

Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

B622-99a

Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

B625-99

Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip

B649-95

Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire

B672-95

Standard Specification for Nickel-Iron-Chromium-MolybdenumColumbium Stabilized Alloy (UNS N08700) Bar and Wire

B677-99

Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube

Available from:

ASTM 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Tel: (610) 832-9585 Fax: (610) 832-9555




--`,``,,```,,``,````,`,`-`-`,,`,,`,`,,`---



` , ` ` , , ` ` ` , , ` ` , ` ` ` ` , ` , ` ` ` , , ` , , ` , ` , , ` -




ISA 75.19.01 Hydro Static Testing of Control Valves

Recommend Documents