Is Standard Detail

MTD 3 MECHANICAL TESTING OF METALS SECTIONAL COMMITTEE COMMITTEE SCOPE - Standardization in the field of mechanical testing of metals LIAISON ISO/TC 164 Mechanical testing of metals Sl. No. IS Number/ DOC Number

Title

Reaffirm No. of Date Amd.

STANDARDS PUBLISHED 1 2

IS 1403(Part 1):1993 / ISO 7799:1985 IS 1499:1977

Mechanical testing testing of metals - Reverse bend test Part 1 Sheet & strip (second revision)

Apr 2009

Method for charpy charpy impact test (U-notch) for metals metals (first revision)

Apr 2009 Feb 2011

3

IS 1500:2005 / ISO 6506-1:1999

Method for Brinell hardness test for metallic materials (third revision)

4

IS 1501:2002 / ISO 6507-1:1997

Method for Vickers hardness test for metallic materials Jul 2007 (third revision) (Superseding IS 1501(Part 1):1984, IS 1501(Part 2):1984, IS 1501 (Part 3):1987, IS 10927 (Part 1):1984, IS 10927(Part 2):1984 and IS 10927(Part 3):1991

5

IS 1586:2000

Method for Rockwell hardness hardness test for metallic material Feb 2011 (Scales A-B-C-D-E-F-G-H-K) A-B-C-D-E-F-G-H-K) (third revision) (Superseding IS 3754, IS 3804, IS 5072, IS 5073 and IS 5076)

6

IS 1598:1977

Method for izod impact test of metals (first revision)

Apr 2009

7

IS 1599:1985 | ISO 7438:2005

Method for for bend test (second (second revision) (Superseding IS IS 1692:1974, IS 3260:1960 and IS 4598:1968)

Feb 2011

8

IS 1608:2005 / ISO 6892:1998

Metallic materials - Tensile testing at ambient temperature Feb 2011 (third revision)

9

IS 1716:1985 | ISO 7801:1984

Method for reverse bend test for metallic wire (second revision) (Superseding IS 6878:1973)

10

IS 1717:1985 | ISO 7800:2003

Method for simple torsion test for for wire (second revision) Feb 2011 (Superseding IS 4176:1971 and IS 6253:1971)

11

IS 1754:2002 / ISO 6507-2:1997

Method for verification of vickers hardness testing machines (third revision) (Amalgating IS 1754(Part 1 & 2):1986)

12

IS 1755:1983 | ISO 7802:1983

Method for wrapping test for metallic metallic wire (first revision) revision) Feb 2011 (Superseding IS 3398:1965 and IS 4168:1967)

13

IS 1757:1988

14

IS 1828(Part 1):2005 / ISO 7500-1 : 1999

* INDICATES STANDARDS UNDER REVISION / INDICATES DUAL NUMBER STANDARDS

Method for charpy impact test (V notch) for metallic material (second revision)

Feb 2011

Jul 2007

Apr 2009

Metallic materials - Verifications of static static uniaxial testing Feb 2011 machines Part 1 Tension/compression testing machines - verficiation and calibration of the force measuring system (third revision)

** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS

1

1

1

15

IS 1828(Part 2):2002 / ISO 7500-2:1996

Metaliic materials -verification of static unuaxial testing machines-Tension creep testing machine verification of the applied load

16

IS 2281:2005 / ISO 6506-2:1999

Method for verification of Brinell hardness testing machines (third revision)

17

IS 2328:2005 / ISO 8492:1998 IS 2329:2005 / ISO 8491:1998

Metallic materials - Tube- Flattening test (second revision)Feb 2011

18

Jul 2007

Feb 2011

Metallic materials - Tube (in full section) - Bend test (second revision)

Feb 2011

Method for flanging test on metallic tubes (first revision)

Apr 2009

Metallic materials - Tube drift expanding test (second revision)

Feb 2011

19

IS 2330:1986

20

IS 2335:2005 / ISO 8493:1998

21

IS 2854:1990

Determination of young's modulus,tangent modulus and Feb 2011 chord modulus - Test method (first revision)

22

IS 2855:1991

Thermostat metals - Determination of flexivity (first revision)

Apr 2009

23

IS 3394:1985

Method for accelerated life test of electrical resistance alloys for heating elements (first revision)

Feb 2011

24

IS 3407(Part 1):1983

Method for creep testing of steel at elevated el evated temperature Feb 2011 Part I Tensile creep testing (first revision) (Superseding IS 3408:1965)

25

IS 3407(Part 2):1983

Part 2 Tensile creep stress rupture testing (first revision) Feb 2011 (Superseding IS 3409:1965)

26

IS 3410:1993

Metallic materials - Determination of linear thermal expansion (first revision)

Apr 2009

27

IS 3711:1990

Wrought steel - Selection and preparation of samples and test pieces for mechanical tests (first revision)

Feb 2011

28

IS 3766:1977

Method for calibration of pandulum impact testing machines for testing metals (first revision)

Apr 2009

29

IS 3803(Part 1):1989 / ISO 2566-1 : 1984

Steel - Conversion of elongation values Part I Carbon & Feb 2011 low alloy steels (second revision)

30

IS 3803(Part 2):1989 / ISO 2566-2 : 1984 IS 4132:2005 / ISO 6506-3:1999

Part 2 Austenitic steels (second revision)

Method for calibration calibration of standardized blocks to be used Feb 2011 for Brinell hardness testing machines (second revision)

IS 4133:2002 / ISO 6507-3:1997

Method for calibration of standardized blocks to be used used for Vickers hardness testing machines (second revision)

31

32

33

IS 4169:1988

34

* IS 4258:1982


2

Feb 2011

Jul 2007

Method for calibration of force-proving instruments used Apr 2009 for the verification of uniaxial testing machines (first revision) Hardness conversion tables for metallic materials (first revision) ** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS

2

Apr 2009

1

35

IS 5069:1982 | ISO 6929

Glossary of terms relating to methods of mechanical testing of metals (first revision)

Apr 2009

36

IS 5070:1985 | ISO 946:1975

Method for beam unnotched impact test for grey cast iron (first revision)

Feb 2011

37

IS 5074:1969 | 1099:1975 IS 5075:1985 | ISO 1143:1975

Method for axial load fatigue testing of steel

Feb 2011

Method of rotating rotating bar bending fatigue fatigue testing of metals metals (first revision)

Feb 2011

38 39

IS 5242:1979

Method of test for determining shear strength of metals (first revision)

Feb 2011

40

IS 6243:1985 | ISO 2626:1973

Method of hydrogen embrittlement test for copper (first revision)

Feb 2011

41

IS 6885:1973

Method for Knoop hardness testing of metals

Feb 2011

42

IS 6886:1973

Method for dynamic force force calibration of axial load fatigue Feb 2011 testing machines by means of a strain gauge technique

43

IS 7095:1973

Method for verification of Knoop hardness testing machines

Feb 2011

44

IS 7096:1981

Method for scleroscope hardness testing for metallic materials (first revision)

Feb 2011

45

IS 7097:1973

Method for calibration of standardized blocks for verification of Knoop hardness testing machines

Feb 2011

46

IS 7172:1984

Method for verification of scleroscope hardness testing machines (first revision)

Feb 2011

47

Method for identification of test-piece axes

Apr 2009

48

IS 8632:1977 | ISO 3785:1976 IS 10166:1982

49

IS 10167:1982

50

IS 10175(Part 1):1993 / ISO 8490:1986

Method for calibration of standardized test block for Feb 2011 verification of scleroscope hardness testing equipments Method for upsetting upsetting test on metallic materials

Jan 2006

Mechanical testing of metals metals -Modified erichsen cupping Apr 2009 test - sheet and strip Pt 1 Thickness upto 2 mm (first revision)

51

IS 10180:1982

Method for plain strain fracture toughness testing of metals

52

IS 10181:1982

Method for determination of magnetic permeability of iron Feb 2011 and steel

53

IS 10623:1983

Drop weight tear test on ferritic steels and line pipe

Feb 2011

54

IS 10636(Part 1):1983

Measurement of abrasive wear properties of metallic materials Part I Test method for gouging abrasion resistance (Jaw crusher test)

Feb 2011



3

Feb 2011

55

IS 10636(Part 2):1983

Part2 Test method for high stress abrasion

Feb 2011

56

IS 10636(Part 3):1983

Part 3 Test method for low stress abrasion

Feb 2011

57

IS 11083:1984

Method for evaluation of friction and wear properties of materials against steel surface

Feb 2011

58

IS 11240:1985

Method for falling weight test on metallic materials

Feb 2011

59

IS 11999:2007 / ISO 10113:1991

Method for determination of plastic strain ratio 'r' for steel sheets (first revision)

60

Method for ring expanding test on metallic tubes

Apr 2009

61

IS 12260:1987 / ISO 8495 : 1986 IS 12261:1987

Method for reverse torsion test for metallic wire

Apr 2009

62

IS 12278:1988

Method for ring tensile test on metallic tubes

Apr 2009

63

IS 12514:1988

Method for torsional stress fatigue testing

Apr 2009

64

IS 12872:1990 | ISO 9513 : 1989

65

IS 13237:1991

Metallic foils - Tension testing

66

IS 13838:1993

Mechanical testing of metals - Determination of poisson's Feb 2011 ratios

67

IS 15420:2003

Metallic materials-charpy pendulum impact test preparation and characterization of charpy V-reference test pieces for verification of test machines

68

IS 15756:2007 / 10275:1993

Metallic materials - Verification of extensometers used in Feb 2011 uniaxial testing

Metallic materials - Sheet and strip - Determination of tensile stain hardening exponent

FINALISED DRAFTS UNDER PRINT 1

DOC.MTD 3(4685) / ISO 7800:2003

Metallic materials - Wire - Simple torsion test (third revision of IS 1717)

2

DOC.MTD 3(4684) / ISO 7438:2005 DOC.MTD 3(4687) / ISO 20482:2003

Metallic materials - Bend test (third revision of IS 1599)

4

DOC.MTD 3(4688) / ISO 9513:1999

Metallic materials - Calibration of extensometers used in uniaxial testing (first revision of IS 12872)

5

DOC.MTD 3(4689) / ISO 8494:1998

Metallic materials - Tube - Flanging test (second revision of IS 2330)

6

DOC.MTD 3(4691) / ISO 8496:1998

Metallic materials - Tube- Ring tensile test (first revision of IS 12278)

3


Metallic materials - Sheet and strip - Erichsen cupping test (second revision of IS 10175)


4

Apr 2009

Apr 2009

7

DOC.MTD 3(4891) / 4545-1:2005

Metallic Materials -lenoop hardness test Part 1 Test Method (first revision of IS 6885 Part 1)

8

DOC.MTD 3(4892) / 4545-2:2005

Metallic materials - knoop hardness test Part 2: Verification and calibration of testing machines [first revision of IS 6885 (Part 2) ]

9

DOC.MTD 3(4893) / 4545-3:2005

Metallic materials - knoop hardness test Part 3: Calibration of reference blocks[ first revision of IS 6885 (Part 3 ]

10

DOC.MTD 3(4894) / 4545-4:2005

Metallic Materials - Knoop hardness test Part 4 Table of hardness values [first revision of IS 6885 (Part 4) ]

11

DOC.MTD 3(4895) / ISO 18265:2003

Metallic materials - Conversion of hardness values (second revision of IS 4258)

12

DOC.MTD 3(4896) / ISO 377:1997

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (second revision of IS 3711)

13

DOC.MTD 3(4897) / ISO 6508-1:2005

Metallic Materials - Rockwell hardness test Part 1 Test Method (Scales A, B ,C ,D ,E ,F, G, H, K, N, T (fourth revision of IS 1586 Part 1 )

14

DOC.MTD 3(4898) / ISO 6508-2:2005

Metallic materils - Rockwell hardness test Part 2 Verification and calibration of testing machines ( scales A, B, C, D, E,, F, H, K, N, T ) (fourth revision of IS 1586 Part 2)

15

DOC.MTD 3(4899) / ISO 6508-3:2005

Metallic materials - Rockwell hardness test Part 3: Calibration of reference blocks (scales A, B,C, D ,E, F, G, .H,K,N,T) (fourth revision of IS 1586 Part 3)



5

MTD 4 WROUGHT STEEL PRODUCTS SECTIONAL COMMITTEE SCOPE - Standardization in the field of steel and wrought steel products including chemical/instrumental analysis, classification, designation and coding of steels LIAISON ISO/TC 17 Steel Sl. No. IS Number/ DOC Number

Title


STANDARDS PUBLISHED 1

SP 14 : 1976

Index to classification of steel

Feb 2008

2

SP 17 : 1979

Index to glossary of terms relating to iron and steel

Feb 2008

3

IS 277:2003

Galvanized steel sheet (plain and corrugated )(sixth revision)

Dec 2008

3

4

IS 279:1981

Galvanized steel wire for telegraph and telephone purposes (third revision)

Nov 2009

2

5

IS 280:2006

Mild steel wire for general engineering purposes (fourth Sep 2010 revision)

1

6

IS 412:1975

Expanded metal steel sheets for general purposes (second revision)

1

7

IS 513:2008

Cold- reduced low carbon steel sheets and strips (fifth revision)

1

Cold rolled non-oriented electrical steel sheet and strip - Mar 2011 Fully processed type - Specification (fifth revision)

3

8

IS 648:2006 | IEC 60404-8-4:1998

Jan 2007

9

IS 649:1997

Methods for testing steel sheets for magnetic circuits of power electrical apparatus (second revision)

Jan 2007

2

10

IS 1029:1970

Hot-rolled steel strip (baling) (first revision)

Feb 2008

2

11

IS 1079:2009

Hot-rolled carbon steel sheet and strip (sixth revision)

12

IS 1136:2008

Preferred sizes for wrought metal products (third revision)

13

* IS 1148:1982

Nov 2009

1

14

IS 1149:1982

High tensile steel rivet bars for structural purposes (third Nov 2009 revision)

15

IS 1387:1993

General requirments for the supply of metallurgical materials (second revision)

Feb 2008

16

IS 1673:1984

Mild steel wire cold heading quality (second revision)

Sep 2010

Code for designation of steels, Part I Based on lettter symbols (first revision)

Feb 2008

17

* IS 1762(Part 1):1974


Hot-rolled rivet bars (upto 40 mm dia) for structural purposes (third revision)


6

18

IS 1812:1982

Carbon steel wire for the manufacture of wood screws (second revision)

Jan 2007

19

IS 1835:1976

Round steel wire for ropes (third revision)

Jan 2007 Feb 2008

2

20

* IS 1956(Part 2):1976

Glossary of terms relating to iron and steel Part 2 Steel making (first revision)

21

* IS 1956(Part 3):1975

Hot rolled steel products (excluding sheet and strip) (first Feb 2008 revision)

3

22

* IS 1956(Part 4):1975

Steel sheet and strip (first revision)

Feb 2008

4

23

IS 1956(Part 5):1976

Bright steel bar and steel wire

Feb 2008

3

24

IS 1990:2009

Steel rivet and stay bars for boilers (second revision)

25

Sep 2010

1

26

IS 1993:2006 / ISO 11949:1995 IS 2002:2009

27

IS 2041:2009

Steel plates for pressure vessels used at moderate and low temperature (third revision)

28

IS 2049:1978

Colour code for the identification of wrought steels for general engineering purposes (first revision)

Feb 2008

1

29

IS 2062:2006

Hot rolled low, medium and high tensile structural steel (sixth revision)

Mar 2011

1

30

IS 2100:1970

Steel billets, bars and sections for boilers (first revision)

Jan 2007

31

IS 2255:1977

Mild steel wire rod for the manufacture of machine screws (by cold heading process)(second revision)

Jan 2007

1

32

IS 2385:1977

Hot-rolled mild steel sheet and strip in coil form for coldreduced tinplate and cold-reduced blackplate (first revision )

Jan 2007

1

33

IS 2507:1975

Cold-rolled steel strips for springs (first revision)

Sep 2010

2

34

IS 2549:1994

Code of classification of processed ferrous scrap (first revision)

Feb 2008

3

35

IS 2589:1975

Hard drawn steel wire for upholstery springs (first revision)

Jan 2007

1

36

IS 2591:1982

Dimensions for hot rolled bars for threaded components Jan 2007 (second revision)

37

IS 2830:1992

Carbon steel cast billet ingots,billets,blooms and slabs for Feb 2008 re-rolling into steel for general structural purposes (second revision) (Superseding IS 6914:1978)


Cold reduced electrolytic tin plate (fourth revision) Steel plates for pressure vessels for intermediate & high temperature service including boilers (third revision)


7

3

38

IS 2831:2001

Carbon steel cast billet ingots, billets, blooms and slabs Sep 2010 for re-rolling into low tensile structural steel (third revision) (Superseding IS 6915:1978)

2

39

IS 2879:1998

Mild steel for metal arc welding electrodes (fourth revision)

Feb 2008

2

Grain orinted electrical steel sheet and strip (second revision)

Sep 2010

1

40

IS 3024:2006 | IEC 60404-8-7:1998

41

IS 3039:1988

Structural steel for construction of hulls of ships(second revision)

Jan 2007

42

IS 3195:1992

Steel for the manufacture of volute and helical springs (for railway rolling stock) (third revision)

Jan 2007

43

IS 3298:1981

Mild steel rivet bars for shipbuilding (first revision)

Jan 2007

44

IS 3431:1982

Steel for the manufacture of volute, helical and laminated Jan 2007 springs for automotive suspension (second revision)

2

45

IS 3502:1994

Steel chequered plates (second revision)

Feb 2008

3

46

IS 3885(Part 1):1992

Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections (second revision)

Jan 2007

1

47

IS 3885(Part 2):1992

Steel for manufacture of laminated springs (railway rolling stock) Part 2 Rib and groove sections (second revision)

Jan 2007

1

48

IS 3975:1999

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables (fourth revision)

Nov 2009

49

IS 4072:1975

Steel for spring washers (first revision)

Jan 2007

50

IS 4223:1975

Steel wire for umbrella ribs (first revision)

Jan 2007

51

IS 4224:1972

Steel wire for office staples, pins and clips (first revision) Jan 2007

1 1

52

IS 4454(Part 1):2001 | ISO 8458-1&2:1998

Steel wires for mechanical springs, Part 1 Cold drawn steel unalloyed steel wire (third revision)

Sep 2010

53

IS 4454(Part 2):2001 | ISO 8458-3:1998

Part 2 Oil hardened and tempered steel wire (second revision) (Superseding IS 4454(Pt 3):1975)

Sep 2010

54

IS 4454(Part 4):2001 | ISO 6931-1:1989 IS 4824:2006

Part 4 Stainless steel wire (second revision)

Sep 2010

Bead wire for tyres (second revision)

Jan 2007 Feb 2008

55 56

IS 5478:1969

Thermostat metal sheet and strip

57

IS 5872:1990

Cold rolled steel strips (box strappings) (second revision) Sep 2010



8

2

2

1

58

* IS 5986:2002

59

IS 6240:2008

Hot rolled steel plate (up to 6mm ) sheet and strip for the manufacture of low pressure liquifiable gas cylinder and liquefied petroleum gas (LPG) containers for automotive use (fourth revision)

60

IS 6902:1973

Steel wire for spokes

Jan 2007

61

IS 6967:1973

Steel for electrically welded round link chains

Jan 2007

62

IS 7072:1973

Glossary of terms relating to emission spectroscopy

Jan 2007

63

IS 7226:1974

Cold rolled medium, high carbon and low alloy steel strip Jan 2007 for general engineering purposes

64

IS 7283:1992

Hot rolled bars for production of bright bars and machined parts for enginner ing applications (first revision)

Jan 2007

65

IS 7452:2002 / ISO 7452:2002

Hot-rolled structural steel plates - Tolerances on dimensions and shape

Mar 2009

66

IS 7557:1982

Steel wire (upto 20 mm) for the manufacture of cold forged rivets (first revision)

Jan 2007

Classification of steels (first revision)

Feb 2008

Mild steel wire rods for general engineering purposes (first revision)

Jan 2007

67 68

IS 7598:1990 | ISO 4948(Pt 1 & 2) IS 7887:1992

Hot rolled steel flat products for structural forming and flanging purposes (second revision)

Dec 2008

69

IS 7904:1995

High carbon steel wire rods (first revision)

Jan 2007

70

IS 8052:2006

Steel ingots,billets and blooms for the production of spings, rivets and screws for general engineering applications - Specification (second revision)

Mar 2011

71

IS 8510(Part 1-3):1977

Tinned steel wire for banding of armatures and rotors

Jan 2007

72

IS 8563:1977

Half round mild steel wire for the manufacture of split pins Jan 2007

73

IS 8564:1977

Steel wire for nipples for spokes

Jan 2007

74

IS 8565:1977

Heald wire

Jan 2007

75

IS 8566:1977

Steel wire for reeds

Jan 2007

76

IS 8910:2010 | / ISO 404:1992

77

IS 8917:1978


General technical delivery requirements for steel and steel products (first revision) Steel plates for galvanizing pots


9

Jan 2007

2

1

78

IS 8951:2001

Steel cast-billet ingots ,billets and blooms for production Sep 2010 of high carbon steel wire rods -Specification (first revision)

79

IS 8952:1995

Steel ingots,blooms and billets for production of mild steelSep 2010 wire rods for general engineering purposes (first revision)

80

IS 9442:1980

Hot rolled steel plates, sheets and strips for manufacture Jan 2007 of agricultural tillage discs

81

IS 9476:1980

Cold rolled steel strips for carbon steel razor blades

Jan 2007

82

IS 9485:1980

Cold-reduced and hot-rolled carbon steel sheet for porcelain enamelling

Jan 2007

83

IS 9550:2001

Bright steel bars (first revision)

Sep 2010

84

IS 9962:1981

Steel wires for needles

Jan 2007

85

IS 10206:1982

Methods of sampling steel wires

Feb 2008

86

IS 10340:1982

Glossary of terms for cold-reduced tinplate and coldreduced blackplate

Feb 2008

87 88

IS 10474:1991 / ISO 10474:1991 IS 10748:2004

89

IS 10794:1984

90

* IS 11513:1985

91

IS 11587:1986 | ISO 4952:2003 IS 11951:1995 / ISO 11951:1995

92

93

IS 12262:1988

94

Hot-rolled steel strip for welded tubes and pipes (second Nov 2009 revision) Mild steel wire for cottor pins

Jan 2007

Hot-rolled carbon steel strip for cold rolling purpose

Sep 2010

Structural weather resistant steels

Jan 2007

IS 12313:1988 | ISO 4999:2005 IS 12367:1988

Hot dip terene coated carbon steel sheet

Jan 2007

Cold-rolled carbon steel strips/coils for manufacture of welded tubes

Jan 2007

96

IS 12457:1988 | ISO 7788:1985

Code of practice for evaluation repairs and acceptance limits of surface defects in steel plates, and wide flats

Jan 2007

97

IS 12591:2006 / ISO 11950:1995

Cold-reduced electrolytic chromium/chromium oxide coated steel (first revision)

Jan 2007

/ INDICATES DUAL NUMBER STANDARDS

3

Cold reduced blackplate in coil form for the prod of tinplate or electroytic chromium/chromium oxide- coated steel Jan 2007

* INDICATES STANDARDS UNDER REVISION

1

Steel & Steel products - Inspection Documents

Trapezoidal steel wires for spring washers

95

1


10

1

1

98

IS 13566:1992

Recommended practice of pickling by H2SO4 levelling and oiling of LPG sheets

99

IS 13752:1993

Guidelines for reporting sequence of elements in steel & Feb 2008 pig iron and mechanical properties in steel

100

* IS 14246:1995

Continuously pre-painted galvanised steel sheets and coils

Sep 2010

101

IS 14491:1997 | ISO 13887:2004

Low carbon high strength cold rolled steel sheets and coils for cold forming

Jan 2007

102

IS 14650:1999

Carbon steel cast billet ingots, billets, blooms and slabs Nov 2009 for re rolling purposes

103

IS 15103:2002

Fire resistant steel

Feb 2008

Cold rolled non-oriented electrical steel and strip delivered in semi processed state

Feb 2008

Hot rolled steel narrow width strip for welded tubes & pipes

Sep 2010

104

IS 15391:2003 | IEC 60404-8-2&3:1998

105

IS 15647:2006

106

IS 16124:2004 / ISO 16124:2004 IS 16160:2005 / ISO 16160:2005

Steel wire rod - dimensions and tolerances

108

IS 16162:2005 / ISO 16162:2005

Continuously cold-rolled steel sheet products Dimensional and shape tolerances

109

IS 16163:2005 / ISO 16163:2005

Continuously hot dipped coated steel steel products dimensional & shape tolerances

107

Jan 2007

Continuously hot rolled steel sheet products Dimensional and shape tolerances


DOC.MTD 4(4939)

Third revision of IS 5986

2

DOC.MTD 4(4839)

Third revision of IS 3502

3

DOC.MTD 4(4851)

Steel rivet bars (medium and high tensile) for structural purposes (fourth revision of IS 1148)

4

DOC.MTD 4(4854)

Compendium of method of chemical analysis of steels

5

DOC.MTD 4(4855)

Hot-dip alumnium zinc alloy metallic coated steel sheet & strip (plain) (IS 15961)

6

DOC.MTD 4(4856)

Pre-painted aluminium zinc alloy metallic coated steel strip & sheet (plain) (IS 15965)

7

DOC.MTD 4(4885)

Structural steel (ordinary quality) ( IS 15911:2010)

8

DOC.MTD 4(4890) / ISO 14284:1996

9

DOC.MTD 4(4923)


Steel & iron sampling and preparation of samples for the determination of chemical composition Structural steels for buildings and structures with improved seismic resistance ** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS

11

1

3

10

DOC.MTD 4(4938)

First Revision of IS 11513

11

DOC.MTD 4(5004)

High tensile strength plat rolled steel plate (upto 6 mm), steel and strip for the manufacture of welded gas cylinder

12

DOC.MTD 4(5005)

Hot rolled medium & high tensile structural steel (seventh revision of IS 2062)

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1

DOC.MTD 4(5055)

First Revision of IS 14246

2

DOC.MTD 4(4940)

Amendment No. 1 to IS 15103:2002

3

DOC.MTD 4(5054)

Cold reduced electrolytic tinplate - Ordinary quality

4

DOC.MTD 4(5042)

Glossary of terms related to iron and steel Part 4 Steel sheet and strip [second revision of IS 1956(Part 4)]

DRAFT STANDARD COMPLETED WIDE CIRCULATION 1

DOC.MTD 4(4852)

Designation system for steels - steel names based on letter symbols [second revision of IS 1762 (Pt 1)]

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1

DOC.MTD 4(4937)

Draft Amendment No. 2 to IS 2879:1998 Mild steel for meal arc welding electrodes (third revision)

2

DOC.MTD 4(5053)

Coated steel sheets for automotive applications

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1

DOC.MTD 4(5040)

Glossary of terms related to iron and steel Part 2 - Steel making [second revision of IS 1956(Part 2)]

2

DOC.MTD 4(5041)

Glossary of terms related to iron and steel Part 3 Hot rolled steel products (excluding sheet and strip) [second revision of IS 1956(Part 3)]



12

MTD 5 FERRO ALLOYS SECTIONAL COMMITTEE SCOPE - Standardization in the field of ferro alloys and other metallic additions used for iron steel making including their chemical/instrumental analysis LIAISON ISO/TC 132 Ferroalloys Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 1110:1990

Ferrosilicon (fourth revision)

Mar 2009

1

2

IS 1170:1992

Ferrochromium (second revision)

Mar 2009

1

3

IS 1171:1996

Ferromanganese (fourth revision)

Mar 2009

4

IS 1466:1985

Ferrovanadium (third revision)

Mar 2009

5

IS 1467:1993

Ferrotungsten ( third revision)

Mar 2009

6

IS 1468:2000

Ferro titanium ( fourth revision)

Mar 2009

7

IS 1469:1993

Ferromolybdenum ( fourth revision )

Mar 2009

8

IS 1470:1990

Silicomanganese (Third revision)

Mar 2009

9

IS 1471:1988

Ferrophosphorous (second revision)

Mar 2009

10

IS 2021:1993

Metallic manganese(second revision)

Mar 2009

11

IS 2022:1997

Calcium silicon (third revision)

Mar 2009

12

IS 2023:1993

Metallic chromium (second revision)

Mar 2009

13

IS 2024:1988

Ferrosilicochromium (third revision)

Mar 2009

14

IS 2085:1962

Code for designation of ferro alloys

Sep 2007

15

IS 2301:2000

Metallic silicon (second revision)

Mar 2009

16

IS 2391:1970

Foundry nickel (first revision)

Mar 2009

17

IS 2782:1964

Primary nickel

Mar 2011



13

1

1

18

* IS 3011:1973

Ferrosilicozirconium (first revision)

Mar 2011

19

IS 3012:1985

Chromemanganese ( first revision )

Mar 2011

20

IS 3013:1991

Ferroboron ( Third revision)

Mar 2011

21

IS 3014:1993

Ferroniobium (Ferrocolumbium) (second revision)

Mar 2009

22

IS 4182:1988

Misch metal (first revision)

Mar 2009

23

IS 4409:1973

Ferronickel (first revision)

Mar 2011

24

IS 5632:1970

Wolframite concentrate

Mar 2011

25

IS 5633:1973

Vanadium pentoxide (first revision)

Mar 2011

26

IS 5634:1987

Molybdenum oxide (technical)(first revision)

Mar 2011

27

IS 7148:1980

Ferro alloys for welding industry

Mar 2011

28

IS 7965:1976

Niobium (Columbium)

Mar 2011

29

IS 11945:1987

Charge chrome

Mar 2011

30

IS 12908:1990

Ferroaluminium

Mar 2009

31

IS 13164:1991

Ferrosilicomagnesium

Mar 2011

32

IS 15765:2008

Method of sampling ferro alloys for sieve analysis and size determination


DOC.MTD 5(4802)

Ferromanganese - Specification (fifth revision of IS 1171)

2

DOC.MTD 5(4803)

Silico manganese - Specification (fourth revision of IS 1470)



14

1

1

MTD 6 PIG IRON AND CAST IRON SECTIONAL COMMITTEE SCOPE - Standardization in the field of pig iron, various types of cast iron and castings LIAISON ISO/TC 5 Ferrous metal pipes and metallic fittings ISO/TC 25 Cast iron and pig iron Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 210:2009

Grey iron castings (fifth revision) (Superseding IS 6331:1987)

2

IS 1536:2001

Centrifugally cast (spun) iron pressure pipes for water, gas and sewage (fourth revision)

3

IS 1537:1976

4

Jul 2006

4

Vertically cast iron pressure pipes for water, gas and sewage (first revision)

Aug 2010

6

IS 1538:1993

Cast iron fittings for pressure pipes for water, gas and sewage (third revision)

Nov 2009

4

5

IS 1729:2002

Cast iron/ductile iron drainage pipes and pipe fittings for Nov 2007 ground non-pressure pipe line socket and spigot series (second revision)

4

6

IS 1865:1991

Iron castings with spheroidal or nodular graphite (third revision)

7

IS 1879:2010

Malleable cast iron pipe fittings (third revision)

8

IS 1956(Part 7):1976

Glossary of terms relating to Iron & Steel- Part 7 Wrought Aug 2008 iron

9

IS 2084:1991

Code for designation of pig iron (second revision)

10

IS 2749:1974

Austenitic iron castings (first revision)

11

IS 3005(Part 1):1979

Grey cast iron ingot moulds, stools and slag ladles Part 1Nov 2007 Bottom stools for large size ingot mould weighing 8 tonnes and higher (first revision)

12

IS 3005(Part 2):1979

Part 2 Grey cast iron ingot moulds of mass more than 8 Aug 2010 tonnes (first revision)

13

IS 3005(Part 3):1982

Part 3 Grey cast iron ingot moulds of mass more than one tonne and up to 8 tonnes (first revision)

14

IS 3005(Part 4):1984

Part 4 Grey cast iron ingot moulds of mass up to 1 tonne Aug 2010 (first revision)

15

IS 3355:1974

Grey iron castings for elevated temperatures for nonpressure containing parts (first revision)

16

IS 3516:1966

Cast iron pipe flanges and flanged fittings for petroleum Aug 2010 industry

17

IS 3896:1961

Comparison of Indian and overseas standards for iron castings



15

Aug 2010

2

Jul 2006 Aug 2010

Aug 2010

Aug 2010

Aug 2010

1

18

IS 3896(Part 1):1978

Comparison of Indian and overseas standards for iron castings Part 1 Grey iron castings (first revision)

Aug 2010

19

IS 3896(Part 2):1985

Comparison of Indian and overseas standards for iron castings (first revision) Part 2 Spheroidal Graphite Iron Castings

Aug 2010

20

IS 3989:2009

Centrifugally cast (spun) iron spigot and socket soil,waste ventilating and rain water pipes, fittings, and accessories (third revision)

21

IS 5519:1979

Deviations for untoleranced dimensions and mass of grey iron castings (first revision)

Aug 2010

22

* IS 5531:1988

Cast iron specials for asbestos-cement pressure pipes for water, gas and sewage (second revision)

Nov 2007

23

IS 5787:1986

Spheroidal or nodular graphite iron castings for paper mill Jul 2006 dryer rolls (first revision)

1

24

IS 5788:1986

Iron castings with spheroidal or nodular graphite for pressure containing partsfor use at elevated temperatures (first revision)

Aug 2010

1

25

IS 5789:1993

Austenitic spheroidal graphite iron casting for pressure containing parts suitable for low-temperature service (first revision)

Nov 2009

26

IS 6163:1978

Centrifugaly cast (spun) iron low pressure pipes for water, gas and sewage (first revision)

Aug 2010

27

IS 6418:1971

Cast iron and malleable cast iron flanges for general engineering purposes

Aug 2010

28

IS 6629:1972

Cast iron rolls

Aug 2010

29

IS 7181:1986

Horizontally cast iron double flanged pipes for water, gas and sewage (first revision)

Aug 2010

30

IS 7520:1974

Corrosion resistant high silicon iron castings

Aug 2010

31

IS 7925:1976

Low alloy types of abrasion resistant iron castings

Nov 2009

32

* IS 8329:2000

Centrifuglly cast (spun) ductile iron pressure pipes for water, gas and sewage (third revision)

Aug 2010

33

IS 8349:1977

Deviations for untoleranced dimensions of malleable iron Aug 2010 castings

34

IS 8350:1977

Deviations for untoleranced dimensions of spheroidal or Aug 2010 nodular graphite iron castings

1

35

IS 8794:1988

Cast iron detachable joints for use with asbestos cement Nov 2007 pressure pipes (first revision)

2

36

IS 9321:1979

Material for alloy cast iron valve seat inserts

37

* IS 9523:2000


| INDICATES EQUIVALENT STANDARDS

16

1

Aug 2010

Ductile iron fittings for pressure pipes for water,gas and Aug 2010 sewage (first revision)

** INDICATES STANDARDS TO BE REVISED

3

2

38

IS 9630:1980

Recommended practice for production of spheriodal graphite

39

IS 10207:1982

Methods of sampling grey iron and malleable iron castingsAug 2010

40

IS 10292:1988

Dimensional requirements for rubber sealing rings for C.I.D. joints in asbestoscement piping (first revision)

Nov 2007

41

IS 10299:1982

Cast iron saddle pieces for service connection from asbestos cement pressure pipes

Aug 2010

42

IS 11606:1986

Methods of sampling cast iron pipes & fittings

Aug 2010

43

IS 12308(Part 1):1987

Method for chemical analysis of cast iron and pig iron Part 1 Determination of total carbon by thermal conductivity method (for carbon1.00 to 4.50 percent)

Nov 2007

44

IS 12308(Part 2):1987

Part 2 Determination of sulphur by iodimetric titration afterNov 2007 combustion (for sulphur 0.005 to 0.25 percent)

45

IS 12308(Part 3):1987

Part 3 Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent)

46

IS 12308(Part 4):1988

Part 4 Determination of total carbon, graphitic carbon and Nov 2009 combined carbon by gravimetric method

47

IS 12308(Part 5):1991

Part 5 Determination of phosphorus by alkalimetric method (for phosphorus 0.01 to 0.50 percent)

48

IS 12308(Part 6):1991

Part 6 Determination of silicon by gravimetric method (for Jul 2006 silicon 0.1 to 6.0 percent)

49

IS 12308(Part 8):1997

Part 8 Determination of chromium by per sulphate oxidation method (for chromium0.1 to 28 percent)

Nov 2007

50

IS 12308(Part 9):1993

Part 9 Determination of molybdenum by thiocynate (spectrometric) method (for molybdenum 0.01 to 1.0 percent)

Nov 2009

51

IS 12308(Part 10):1991

Part 10 determination of managanese (upto 7.0 percent) Jul 2006 by arsenite(volumetric )method

52

IS 12308(Part 11):1991

Part 11 Determination of total carbon by the direct combustion volumetric method (for carbon 1.50 to 4.50 percent)

Jul 2006

53

IS 12308(Part 12):1992

Part 12 Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent)

Nov 2007

54

IS 12308(Part 13):1992

Part 13 Determination of magnesium by atomic absorptin Nov 2007 spectrometric method (for magnesium upto 0.1 percent)

55

IS 12308(Part 14):1993

Part 14 Determination of titanium by hydrogen per oxide Nov 2009 (spectrophotometric) method (for titanium upto 0.25 percent)

56

IS 12820:2004

Dimensional requirements of rubber gaskets for Nov 2009 mechanical joints and push-on joits for use with cast iron pipes and fittings for carrying water, gas and sewage (first revision)



17

Nov 2009

1

Nov 2007

Jul 2006

1

57

IS 12987:1991

Cast iron detachable joints for use with asbestos cement Aug 2010 pressure pipes (light duty)

58

IS 12988:1991

Dimensional requirements for rulbber sealing rings for Aug 2010 CID joints in asbestos cement piping for light duty AC pipes

59

* IS 13382:2004

60

Cast iron specials for mechanical and push-on flexible joints for pressure pipelines for water, gas and sewage - Specification (first revision)

Nov 2009

IS 13502:1992

Pig iron

Aug 2010

61

IS 14329:1995

Malleable iron castings

Aug 2010

62

IS 15338:2003

Spectrometric analysis of cast iron by direct reducing optical emission vacuum spectrometer - Point to plane technique

Aug 2008


DOC.MTD 6(5028)

Specification for Abrasion-resistant iron castings (third revision of IS 4771)

2

DOC.MTD 6(4800)

Habless cerntifugally cast (spun) iron pipes, fittings and accessories - spigot series


DOC.MTD 6(5029)

STANDARDS UNDER REVISION / INDICATES DUAL NUMBER STANDARDS

Cast iron specials for asbestos cements pressure pipes for water and sewage - Specification (third revision of IS 5531)


18

MTD 7 LIGHT METALS AND THEIR ALLOYS SECTIONAL COMMITTEE SCOPE - Standardization in the field of aluminium, magnesium, titanium and and their alloys and products (other than structural sections) including their chemical instrumental analysis LIAISON ISO/TC 79 Light metals and their alloys Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


SP 1 : 1967

Comparision of Indian and overseas standards on aluminium alloy castings

2

IS 21:1992

Wrought aluminium and aluminium alloys for manufacture Oct 2006 of utensils (fourth revision)

3

IS 23:1980

Primary aluminium ingots for remelting for aircraft purposes (third revision)

Oct 2006

4

IS 202:1981

Aluminium casting alloy ingots and casting for aircraft purposes (third revision)

Oct 2006

1

5

IS 617:1994

Aluminium and aluminium alloy ingots and castings for general engineering purposes (third revision) (Superseded IS 20:1977)

Mar 2010

1

6

IS 733:1983

Wrought aluminium and aluminium alloy bars, rods and Oct 2006 sections for general engineering purposes (third revision)

1

7

IS 734:1975

Wrought aluminium and aluminium alloys,forging stock and forgings for general engineering purposes (second revision)

8

IS 736:1986

Wrought aluminium and aluminium alloy plate for general Oct 2006 engineering purposes (third revision)

9

IS 737:2008

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes (fourth revision)

10

IS 738:1994

Wrought aluminium alloys, drawn tube for general engineering purposes (third revision)

11

IS 739:1992

Wrought aluminium and aluminium alloy wire for general Oct 2006 engineering purposes (third revision)

12

IS 740:1977

Wrought aluminium and aluminium alloy rivet stock for general engineering purposes (second revision)

Oct 2006

13

IS 1253:1992

Aluminium for use in iron and steel manufacture (third revision)

Oct 2006

14

IS 1254:2007

Corrugated aluminium sheet (fourth revision)

15

IS 1284:1975

Wrought aluminium alloy bolt and screw stock for general Oct 2006 engineering purposes (second revision)

16

IS 1285:2002

Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes (third revision)



19

Dec 2007

Oct 2006

Mar 2010

Dec 2007

1

17

IS 1820:1979

Recommended shapes and sizes for aluminium notched Oct 2006 bars and ingots for remelting purposes (first revision)

18

IS 2047:1992

Aluminium alloy hardeners (Master alloys) (second revision)

Oct 2006

19

IS 2066:1962

Coding and classification for non-ferrous scrap metals and residues

Mar 2010

20

IS 2067:1975

Wrought aluminium wire for electrical purposes (first revision)

Dec 2007

21

IS 2304:1962

Procedure for inspection and testing of light metals (aluminium and magnesium) and their alloy ingots and castings for aircraft purposes

Oct 2006

22

IS 2479:1981

Colour code for the identification of aluminium and aluminium alloys for general engineering purposes (second revision)

Oct 2006

23

IS 2525:1982

Dimensions for wrought aluminium and aluminium alloys, Oct 2006 wire (first revision)

24

IS 2590:1987

Primary aluminium ingots for remelting for general engineering purposes (second revision)

25

IS 2673:2002

Dimensions for wrought aluminium and aluminium alloys Dec 2007 extruded round tube (second revision)

26

IS 2676:1981

Dimension for wrought aluminium and aluminium alloy sheet and strip (first revision)

27

IS 2677:1979

Dimensions for wrought aluminium and aluminium alloys, Oct 2006 plates and hot rolled sheets (first revision)

28

IS 2678:1987

Dimensions and tolerances for wrought aluminium and aluminium alloy drawn roundtube (second revision)

Oct 2006

29

IS 3420:1976

Procedure for inspection and testing of aluminium alloy sheets and strips for aircraft purposes (first revision)

Oct 2006

30

IS 3436:1978

Aluminium clad aluminium alloy sheet and strip for aircraft purposes (Alloy 24345) (first revision)

Oct 2006

31

IS 3577:1992

Wrought aluminium and aluminium alloys rivet, bolt and screw stock - Dimensionsand tolerances (first revision)

Oct 2006

32

IS 3704:1966

Methods for sampling of light metals and their alloy products

Oct 2006

33

IS 3965:1981

Dimensions for wrought aluminium and aluminium alloy bar, rod and section (first revision)

Oct 2006

34

IS 4026:2007

Aluminium ingots billets and wire bars (EC grade) (fourth revision)

35

IS 5047(Part 1):1986

Glossary of terms relating to aluminium and aluminium alloys Part 1 Unwrought and wrught metals (second revision)

Oct 2006

36

IS 5047(Part 2):1979

Part 2 Plant and operations, thermal treatment, control and testing, finishing

Oct 2006



20

1

1

Oct 2006

Oct 2006

1

37

IS 5047(Part 3):1979

Part 3 Geometric properties and toolerances, structural and surface defects

Oct 2006

38

IS 5052:1993

Aluminium and its alloys - Temper designations (first revision)

Dec 2007

39

IS 5082:1998

Wrought aluminium and aluminium alloy bars, rods, tubes Dec 2007 and sections for electrical applications (second revision)

2

40

IS 5484:1997

EC grade aluminium rod produced by continuous casting Oct 2006 and rolling (first revision)

1

41

IS 6051:1970

Code for designation of aluminium and its alloys

42

IS 6477:1983

Dimensions for wrought aluminium and aluminium alloys, Mar 2010 extruded hollow section (first revision)

43

IS 6694:1999

Magnesium ingot for remelting (second revision)

Mar 2010

44

IS 6751:1972

Aluminium alloy castings and strips for bearings

Mar 2010

45

IS 6754:1972

Aluminium alloy ingots for bearings

Mar 2010

46

IS 7092(Part 1):1992

Aluminium alloy tubes for irrigation purposes Part 1 Welded tubes (second revision)

Oct 2006

47

IS 7092(Part 2):1987

Part 2 Extruded tubes (second revision)

Oct 2006

48

IS 7428:1974

Aluminium alloy extruded bars, rods and sections (for aircraft purposes) (Alloy24345)

Oct 2006

49

IS 7429:1974

Procedure for inspecction and testing of aluminium and aluminium alloy extrudedbars, rods and sections (for aircraft purposes)

Oct 2006

50

IS 7670:2002

Aluminium alloy forging stock and forgings (for parts operated at elevated temperatures) for aerospace applications (Alloy 22588) (first revision)

Dec 2007

51

IS 7674:1975

Procedure for inspection and testing of aluminium and aluminium alloy forging stock and forgings for aircraft purposes

Oct 2006

52

IS 7793:1975

Aluminium alloys for IC engine pistons

Oct 2006

53

IS 7882:1975

Aluminium alloy sheet and strip for aircraft purposes (Alloy 19000)

Mar 2010

54

IS 7883:1975

Aluminium-manganese sheet and strip for aircraft purposes (Alloy 31000)

Mar 2010

55

IS 7902:2001

Aluminium alloy forging stock and forgings (Alloy 24345) Dec 2007 for aircraft purposes (first revision)

56

IS 8474:1977

Procedure for inspection and testing of aluminium and aluminium alloy wires (for rivets) for aircraft purposes



21

Mar 2010

Oct 2006

2

1

57

IS 8513:1977

Aluminium alloy wire for cold forged rivets for aircraft purposes (Alloy 55000)

Mar 2010

1

58

IS 8514:1977


Mar 2010

1

59

IS 8515:1977

Aluminium wire for cold forged rivets for aircraft purposes (Alloy 19500)

Mar 2010

1

60

IS 8560:1977

Aluminium clad aluminium alloy sheet and strip for aircraftMar 2010 purposes (Alloy 24530)

61

IS 8561:1977

Aluminium alloy clad sheet and strip for aircraft purposes Mar 2010 (Alloy 76528)

62

IS 8936:1978

Aluminium alloy for wire for cold forged rivets for aircraft purposes (Alloy 24350)

Oct 2006

63

IS 8937:1978


Mar 2010

64

IS 8938:1978

Aluminium alloy wire for cold forged rivets for aircraft purposes(Alloy 24345)

Mar 2010

65

IS 9612:1980

Aluminium tubes for refrigeration purposes

Oct 2006

66

IS 9997:1991

Aluminium alloy redraw rods for electrical purposes (first Oct 2006 revision)

67

IS 10257:1982

Aluminium foil stock

Mar 2010

68

IS 10259:1982

General conditions for delivery and inspection of aluminium and aluminium alloyproducts

Mar 2010

69

IS 11804:1986

Code of practice for manufacture of aluminium alloy pressure die castings

Oct 2006

70

IS 11861:1986

Titanium and titanium alloy strip, sheet and plate

Mar 2010

71

IS 11890:1987

High purity aluminium ingot for remelting for special applications

Oct 2006

72

IS 11901:1986

Titanium sponge

Mar 2010

73

IS 11902:1986

Titanium and titanium alloy bars and billets

Mar 2010

74

IS 11998:1987

Aluminium for the manufacture of alloys for IC engine pistons

Oct 2006

75

IS 12389:1988

Seamless and welded titanium and titanium alloy fitting

Mar 2010

76

IS 12442:1988

Seamless and welded titanium and titanium alloy tubes for condensers and heat exchangers

Mar 2010

77

IS 12644:1989

Titaniium and titanium alloy pipe, seamless and welded

Mar 2010



22

1

78

IS 12828:1989

Recommended practice for descaling and cleaning titanium and titanium alloy surfaces

79

IS 14712:1999

Wrought Aluminium and its alloy chequered tread sheets Mar 2010 for general engineeringpurposes

80

IS 15392:2003

Aluminium & Aluminium alloy bare foil for food packaging Dec 2007


DOC.MTD 7(4981)

Aluminium and Aluminium alloy foil for pharmacentical packaging

2

DOC.MTD 7(4799)

Poly laminated aluminium cable wrap


DOC.MTD 7(4753)

Primary aluminium ingots for remelting for general engineering purposes (third revision of iS 2590)

2

DOC.MTD 7(4754)

Wrought aluminium and aluminium alloys - Chemical composition and form of products - Part 1 Chemical Composition

3

DOC.MTD 7(4755)

Aluminium and aluminium alloy - Wrought products Temper designation (second revision of IS 5052)



23

Mar 2010 1

MTD 8 COPPER AND COPPER ALLOYS SECTIONAL COMMITTEE SCOPE - Standardization in the field of copper and copper alloys and products and their chemical/instrumental analysis LIAISON ISO/TC 26 Copper and copper alloys Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 28:1985

Phosphor bronze ingots and castings (fourth revision)

Apr 2006

1

2

IS 191:2007

Copper (fourth revision)

3

IS 288:1981

Arsenical copper rods for boiler stay bolts and rivets (second revision)

Apr 2006

1

4

IS 291:1989

Naval brass rods and sections for machining purposes (third revision)

Apr 2006

5

IS 292:1983

Leaded brass ingots and castings (second revision)

Apr 2009

6

IS 304:1981

High tensile brass ingots and castings (second revision)

Apr 2006

7

IS 305:1981

Aluminium bronze ingots and castings (second revision)

Apr 2006

8

IS 306:1983

Tin bronze ingots and castings (third revision)

Apr 2009

1

9

IS 318:1981

Leaded tin bronze ingots and castings (second revision)

Apr 2006

2

10

IS 319:2007

Free cutting brass bars, rods and sections (fifth revision)

11

IS 320:1980

High tensile brass rods and sections (other than forgings Apr 2006 stock) (second revision)

1

12

IS 407:1981

Brass tubes for general purposes (third revision)

Apr 2006

2

13

IS 410:1977

Cold rolled brass sheet, strip and foil (third revision)

Apr 2006

1

14

IS 422:1981

Brass sheet and strip for the manufacture of utensils (second revision)

Apr 2006

15

IS 531:1981

Leaded brass strips for instrument parts (second revision)

Apr 2006

16

IS 613:2000

Copper rods and bars for electrical purposes (third revision)

Apr 2006

17

IS 1028:1987

Silicon bronze ingots and castings (second revision)

Apr 2009



24

1

1

18

IS 1264:1997

Brass gravity die castings (ingots and castings) (fourth revision)

19

IS 1408:1968

Recommended procedure for inspection of copper-base Apr 2006 alloy sand castings (first revision)

20

IS 1458:1965

Railway bronze ingots and casting (revised)

Apr 2006

21

IS 1545:1994

Solid drawn copper and copper alloy tubes for condenser and heat exc hangers - Specification (third revision)

Apr 2006

22

IS 1897:2008

Copper strip for electrical purposes (third revision)

23

IS 2283:2000

Nickel silver sheet, strip and foil (second revision)

24

IS 2305:1988

Method for mercurous nitrate test for copper and copper Apr 2009 alloys (first revision)

25

IS 2376:1963

Colour code for the identification of copper & copper alloys

Apr 2006

26

IS 2378:1974

Code for designation of copper and copper alloys (first revision)

Apr 2006

27

IS 2451:1994

Nickel silver ingots and castings for cutlery and hollowware (first revision)

Apr 2006

28

IS 2501:1995

Solid drawn copper tubes for general engineering purposes (third revision)

Apr 2006

29

IS 2704:1983

Brass wires for cold-headed and machined parts (first revision)

Apr 2009

30

IS 2768:1982

Copper alloy strip for bullet envelope (first revision)

Apr 2009

31

IS 2826:1986

Dimensions and tolerances for copper and copper alloy rods and bars for generalengineering purposes (third revision)

Apr 2006

32

IS 3051:1988

Dimensions and tolerances for wrought copper and copper alloy plate (first revision)

Apr 2006

33

IS 3052:1986

Dimensions and tolerances for wrought copper and copper alloy sheet, strip and foil for general engineering purposes (second revision)

Apr 2006

34

IS 3091:1999

Aluminium bronze ingots and castings for overhead fittings in electrical traction (First Revision)

Apr 2009

35

IS 3167:1982

Cap copper alloy strip (first revision)

Apr 2009

36

IS 3168:1981

Brass strip and foil for deep drawing (first revision)

Apr 2006

37

IS 3288(Part 1):1986

Glossary of terms for copper and copper alloys Part 1 Materials (third revision)

Apr 2006



25

Apr 2009

1

4

Apr 2006

1

1

38

IS 3288(Part 2):1986

Part 2 Unwrought form and cast form

Apr 2006

39

IS 3288(Part 3):1986

Part 3 Wrought forms

Apr 2006

40

IS 3288(Part 4):1986

Part 4 Processing

Apr 2006

41

IS 3288(Part 5):1986

Part 5 Heat treatment

Apr 2006

42

IS 3288(Part 6):1986

Part 6 Finishes

Apr 2006

43

IS 3288(Part 7):1986

Part 7 Dimensional surfaces and structural characterstics Apr 2006

44

IS 3288(Part 8):1986

Part 8 Packing

45

IS 3331:2007

Copper and brass strips/foils for radiator cores (second revision)

46

IS 4076:1983

Hard brass wires for springs and other special purposes (first revision)

Apr 2009

47

IS 4131:1967

Nickel copper alloy castings

Apr 2006

48

IS 4170:1967

Brass rods for general engineering purposes

Apr 2006

2

49

IS 4171:1983

Copper rods and bars for general engineering purposes (first revision)

Apr 2009

1

50

IS 4412:1981

Copper wires for general engineering purposes (first revision)

Apr 2006

1

51

IS 4413:1981

Brass wires for general engineering purposes (first revision)

Apr 2006

1

52

IS 4519:1977

Dimensions for copper commutator bars (first revision)

Apr 2006

53

IS 5053:1969

Dimensions for wrought copper and copper alloy rods for fasteners

Apr 2006

54

IS 5493:1981

Dimensions for wrought copper and copper alloy tubes (first revision)

Apr 2006

55

IS 5743:1991

Copper master alloys - (first revision)

Apr 2006

56

IS 5744:1991

Copper alloy screwed ferrules for condenser, heater and cooler tubes (first revision)

Apr 2006

57

IS 5885:1977

Copper for commutator bars (first revision)

Apr 2006

58

IS 6912:2010

Copper and copper alloy forging stock and forgings (second revision) (Superseding IS 3488:1980)


Apr 2006


26

1

1

59

IS 7608:1987

Phosphor bronze wire for general engineering purposes (first revision)

Apr 2006

1

60

IS 7811:1985

Phosphor bronze rods and bars (first revision)

Apr 2006

4

61

IS 7814:2010

Phosphor bronze sheet and strip (second revision)

62

IS 8328:2007

Free cutting copper bars, rods and sections (first revision)

63

IS 8362:1977

Copper and copper alloy rolled plates for condensers and heat exchangers

Apr 2006

64

IS 8364:1989

Free cutting brass wire (first revision)

Apr 2006

65

IS 8365:1991

Copper alloys for spot and seam resistance welding electrodes (first revision)

Apr 2006

66

IS 8631:1977

Copper base alloys for marine propellers

Apr 2006

67

IS 8859:1978

Cast copper tuyere

Apr 2006

68

IS 9682:1980

Recommended procedure for inspection of cast copper tuyeres

Apr 2006

69

IS 9713:1983

Hot rolled electrolytic copper wire rod for electrical conductors (first revision)

Apr 2009

70

IS 9805:1981

High conductivity copper castings

Apr 2006

71

IS 9861:1981

Dimensions for wrought copper and copper alloy wires for general engineering purposes

Apr 2006

72

IS 10569:2010

Aluminnium bronze rods and bars (first revision)

73

IS 10709:1983

Brass wires for fourdrinier cloth

Apr 2009

1

74

IS 10710:1983

Phosphor bronze wires used for fourdrinier cloth

Apr 2009

2

75

IS 10742:1983

Cast gun metal rods and bars

Apr 2009

1

76

IS 10757:1983

Nickel silver rods and bars

Apr 2009

1

77

IS 10773:1995

Copper tubes for refrigeration purposes (first revision)

Apr 2006

78

IS 11109:1984

Silicon brass ingots and castings

Apr 2006

79

IS 12228:1987 / ISO 4746 : 1977

Method for scale adhesion test for oxygen free copper

Apr 2006



27

80

IS 12443:1988

Rolled brass plates for general engineering purposes

Apr 2009

81

IS 12444:1988

Continuously cast and rolled electrolytic copper wire rods for electrical conductors

Apr 2009

82

IS 12558:1988

Recommended shape, size and mass of copper and copper alloy ingots for remelting purposes

Apr 2009

83

IS 14340:1996

Brass for current carrying parts in electrical wiring accessories

Apr 2006

84

IS 14810:2000

Copper tubes for plumbing

Apr 2006

85

IS 14811:2000

Rolled copper plate, sheet, strip and coils for general Apr 2006 engineering purposes (Superseding IS 1550, IS 1972 & IS 3487)


DOC.MTD 8(4984)


Phosphor bronze rods and bars ( second revision of IS 7811)


28

2

MTD 9 LEAD, ZINC, CADMIUM, TIN, ANTIMONY OTHER NON-FERROUS SPECIAL METALS AND THEIR ALLOYS SECTIONAL COMMITTEE

SCOPE - Standardization in the field of lead, zinc, cadmium, tin, antimony , nickel, molebednum tungsten and other special non-ferrous metals (excluding l ight metals) and their alloys including their chemical/instrumental analysis LIAISON ISO/TC 18 Zinc and zinc alloys Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 25:1979

Antifriction bearing alloys (third revision)

May 2008

2

IS 26:1992

Tin ingot (fourth revision)

May 2008

1

3

IS 27:1992

Pig lead (fourth revision)

May 2008

2

4

IS 193:2000

Soft solder (fifth revision)

Jul 2010

1

5

IS 209:1992

Zinc ingot (fourth revision)

May 2007

2

6

IS 211:1992

Antimony ingot (fourth revision)

May 2008

7

IS 404(Part 1):1993

Lead pipes Part 1 For other than chemical purposes (third revision)

May 2008

8

IS 404(Part 2):1993

Part 2 For chemical purposes (third revision)

May 2008

9

IS 405(Part 1):1992

Lead sheet and strips Part 1 For chemical industries (third revision)

May 2008

10

IS 405(Part 2):1992

Part 2 For other than chemical purposes (third revision)

May 2008

11

IS 713:1981

Zinc base alloy ingots for die casting (second revision)

May 2008

12

IS 742:1981

Zinc base alloy die castings (second revision)

May 2008

13

IS 1654:1992

Lead antimony alloys (third revision)

May 2008

14

IS 1655:1991

Zinc alloys - Code of practice for manufacture of pressure die castings (secondrevision)

Apr 2006

15

IS 1817:1961

Methods of sampling non-ferrous metals for chemical analysis

Jul 2010

16

IS 1921:2005

Flux-cored solder wire (second revision)

Jul 2010

17

IS 2258:1981

Rolled zinc plate, sheet and strip (second revision)

Jul 2010



29

2

1

18

IS 3717:1977

Refined secondary lead (first revision)

May 2008

19

IS 4280:1992

Refined secondary tin ingot (second revision)

May 2008

20

IS 4699:1984

Refined secondary zinc (first revision)

21

IS 5479:1985

Solders for jointing aluminium and aluminium alloys (first Apr 2006 revision)

22

IS 6344:2006

Cadmium metal (second revision)

23

IS 8439:1977

Methods for sampling of lead and lead alloys

May 2008

24

IS 8475:1977

Lead based antifriction bearing alloy for heavy duty applications

May 2008

25

IS 11516:2005

Soft solder for electronic applications (first revision)

Jul 2010

26

IS 11900:1986

Tungsten rods and tungsten wire for lamps and electron devices

Jul 2010

27

IS 12445:1988

Molybdenum plate, sheet, strip and foil

Jul 2010

28

IS 12447:1988

Zinc wire for sprayed zinc coatings

29

IS 12465:1988

Molybdenum wires for lighting and electronic application Jul 2010

30

IS 13229:1991

Zinc for galvanizing

31

IS 13350:1992

Molybdenum rod

Jul 2010

32

IS 13351:1992

Thoriated tungsten wires and rods

Jul 2010

33

IS 13923:1993

Lead seal

34

IS 14651:1999

Multifilamentary Nb-Ti super conducting wires

Jul 2010

35

IS 14688:1999

Lead-Antimony alloy bricks for radiation shielding

Jul 2010


Apr 2006

May 2008

May 2008

May 2007


30

1

2

1

3

1

MTD 10 PRECIOUS METALS SECTIONAL COMMITTEE SCOPE - Standardization in the field of precious metals LIAISON ISO/TC 174 Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 639:1982

Gold leaf (second revision)

Nov 2009

2

IS 964:1956

Methods for chemical analysis of silver solder

Mar 2009

3

IS 1417:2009

Gold and Gold alloys-jewellery/Artefacts -Fineness and Marking-Specification (third revision)

3

4

IS 1418:2009

Method for assaying of gold in gold bullions gold alloys Feb 2004 and jewellary/artefacts -Cupellation (Fire assay) method (second revision)

1

5

IS 1953:1973

Methods of chemical analysis of silver anodes (first revision)

Dec 2010

6

IS 2112:2003

Grades of silver and silver alloys (first revision)

Dec 2010

4

7

IS 2113:2002

Methods for assaying of silver in silver and silver alloys (first revision)

Dec 2010

3

8

IS 2270:1965

Method for assaying of platinum and platinum alloys

Dec 2010

9

IS 2271:1967

Recommended method for spectrographic analysis of platinum

Dec 2010

10

IS 2275:1984

Grades of platinum (first revision)

Dec 2010

11

IS 2279:1980

Fine silver bar, sheet, wire, granules and token (first revision)

Nov 2009

12

IS 2767:1984

Gold thread (silver base)(first revison)

Dec 2010

13

IS 2790:1999

Guidelines for manufacture of 23.3, 22, 21, 18, 14, 12 and 9 carat gold (firstrevision)

Dec 2010

14

IS 3088:1967

Method for assaying of fine grade palladium

Dec 2010

15

IS 3095:1999

Gold solders for use in manufacture of jewellery Specifiction (second revision)

Nov 2009

16

IS 3096:2003

Fine grade palladium - Specification (first revision)

Dec 2010

17

IS 3110:1982

Silver leaf (first revision)

Dec 2010

18

IS 3111:1984

Silver thread (first revision)

Dec 2010



31

1

1

19

IS 3112:1984

Gold and silver embroidery materials (first revision)

Dec 2010

20

IS 3571:1985

Dental gold solders (first revision)

Dec 2010

21

IS 3578:1985

Dental gold alloy wire (first revision)

Dec 2010

22

IS 3610:1985

Dental gold foil (first revision)

Dec 2010

23

IS 4134:1967

Recommended colour classification of rough diamonds

Dec 2010

24

IS 4703:1968

Methods of chemical analysis of silver-manganese brazing alloys

Dec 2010

25

IS 4704:1985

Silver tin dental amalgam alloy (first revision)

Dec 2010

26

IS 4705:1985

Dental mercury (first revison)

Dec 2010

27

IS 4799:1985

Dental casting gold alloys, non-porcelain bonding (first revision)

Dec 2010

28

IS 5954:1985

Dental white gold alloys (first revision)

Dec 2010

29

IS 6018:1993

Platinum, platinum rhodium catalyst gauges (first revision)Feb 2004

30

IS 6019:1993

Platinum dish (first revision)

Nov 2009

31

IS 6170:1971

Platinum crucible and lid

Nov 2009

32

IS 6683:1998

Diameters of wires for platinum group metals and their alloys (First Revision)

Nov 2009

33

IS 6882:1973

Platinum electrodes

Nov 2009

34

IS 6889:2000

Method for chemical analysis of silver tin dental amalgam Nov 2009 alloy (first revision)

35

IS 6890(Part 1):1989

Method for chemical analysis of dental gold alloys Part 1 Nov 2009 Determination of gold, silver, palladium and platinum (First Revision)

36

IS 6890(Part 2):1975

Part 2 Determination of nickel and zinc

Nov 2009

37

IS 7225:1985

Dental cobalt chromium casting alloy (first revision)

Dec 2010

38

IS 7255(Part 1):1974

Methods of chemical analysis of solders for use in Nov 2009 goldware Part 1 Determination of gold, silver and copper

39

IS 7255(Part 2):1977

Part 2 Determination of cadmium and zinc by polarographic method



32

Nov 2009

1

1

40

IS 7562:1974

Gold cladding

Nov 2009

41

IS 8858:1978

Methods for spectrographic analysis of fine silver ingot (grades 9999 and 999)

Dec 2010

42

IS 8929:1978

High purity gold wire for electrical contacts

Nov 2009

43

IS 9443:1980

Guidelines for marking purity of silver on silver articles/ornaments

Nov 2009

44

IS 9925:1981

Method for determination of gold and silver in gold and silver thread and embroidery materials

Nov 2009

45

IS 11095:1984

Bi-metallic strips and bars with precious metal on phosphor bronze base for electrical contacts

Nov 2009

46

IS 12144:1987

Fine silver wire for electrical contacts

Nov 2009

47

IS 13600:1992

Chemical analysis of silver palladium alloys

Nov 2009

48

IS 14741:1998 / ISO 8654:1987

Colour of gold alloys - Definition, range of colour and designation

Dec 2010

49

IS 15329:2003

Platinum and platinum alloys, jewellery/artefacts Fineness and marking - Specification

50

IS 15766(Part 2):2007

Grading polished diamond Part 2 Test methods

1

51

IS 15766(Part 1):2007

Part 1 Classification

1

52

IS 15820:2009

General requirements for component or assaying & hallmarking centre

53

IS 15893:2010 / ISO 10713 FINALISED DRAFTS UNDER PRINT

Jewellery - Gold alloy coating

1

DOC.MTD 10(4866)

Jewellery - Ring sizes - Definition, measurement and designation (ISO 8653:1986)

2

DOC.MTD 10(4970)

Jewellery - Determination of platinum in platinum jewellery alloys inductively coupled plasma (ICP) solution - spectrometric method using yttrium as internal standard element (adoption of ISO 11494:2008)

3

DOC.MTD 10(4971)

Jewellery - determination of palladium in palladium jewellery alloys inductively coupled plasma (ICP) solution spectrometric method usng yttrium as internal standard element (adoption of ISO 11495:2006)


DOC.MTD 10(5076)


Gold and gold alloys, jewellery/artefacts - fineness and marking - specifiction (fourth revision of IS 1417)


33

2

DOC.MTD 10(5077)

Silver and silver alloys, jewellery/artefacts - fineness and marking -specification (third revision of IS 2112)

3

DOC.MTD 10(5078)

Assaying silver in silver and silver alloys - Methods (third revision of IS 2113)



34

MTD 11 WELDING GENERAL SECTIONAL COMMITTEE SCOPE - Standardization in the field of welding fundamental consubles , equipment (other than electrical) testing training safety etc. LIAISON ISO/TC 44 Welding and allied processes Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


** IS 812:1957

2

IS 813:1986

Scheme of symbols for welding (revised)

Sep 2008

3

IS 814:2004

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel (sixth revision)

Mar 2011

4

IS 817:1966

Code of practice for training and testing of metal arc welders (revised)

Sep 2008

5

IS 817(Part 1):1992

Part 1 Manual metal arc welding (second revision)

Sep 2008

6

IS 817(Part 2):1996

Part 2 Oxyfuel welding (second revision)

Sep 2008

7

IS 818:1968

Code of practice for safety and health requirements in electric and gas weldingand cutting operations (first revision)

Sep 2008

8

IS 822:1970

Code of procedure for inspection of welds

Sep 2008

Glossary of terms relating to welding and cutting of metalsSep 2008

1

9

* IS 1179:1967

Equipment for eye and face protection during welding (first revision)

Sep 2008

1

10

IS 1278:1972

Filler rods and wires for gas welding (second revision)

Sep 2008

2

11

IS 1393:1961

Code of practice for training and testing of oxy acetylene Sep 2008 welders

12

IS 1395:1982

Low and medium alloy steel covered electrodes for manual metal arc welding (third revision)

Sep 2008

13

IS 2927:1975

Specification for brazing alloys (first revision)

Sep 2008

14

IS 3016:1982

Code of practice for fire precautions in welding and cutting operations (firstrevision)

Mar 2011

15

IS 3600(Part 1):1985

Methods of testing fusion welded joints and weld metal in Sep 2008 steel (second revision) Part 1 Cruciform fillet weld tensile test

16

IS 3600(Part 2):1985

Part 2 Beam impact (charpy V-notch) test

17

IS 3600(Part 3):2009 / 4136:2001


Part 3 Transverse tensile test on butt welds


35

Sep 2008

1

18

IS 3600(Part 4):1984

Part 4 Longitudinal tensile test on cylindrical weld metal Mar 2011 test pieces on butt welds

19

IS 3600(Part 5):1983 / ISO 5173:1981

Part 5 Transverse root and face bend test on butt welds Mar 2011 (second revision)

20

IS 3600(Part 6):1983 / ISO 5177:1984

Part 6 Transverse side bend test on butt welds (second Sep 2008 revision)

21

IS 3600(Part 7):1985

Part 7 Longitudinal root and face bend test on butt welds Sep 2008

22

IS 3600(Part 8):1985

Part 8 Nick break test and fillet weld fracture test

Sep 2008

23

IS 3600(Part 9):1985

Part 9 Macro and micro examination

Sep 2008

Acceptance tests for wire flux combination for submerged arc welding (first revision)

Mar 2011

24

* IS 3613:1974

25

IS 4943:1968

Assessment of butt and fillet fusion welds in steel sheet, Sep 2008 plate and pipe

26

IS 4972:1968

Resistance spot welding electrodes

Sep 2008

27

IS 5206:1983

Covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (first revision)

Sep 2008

28

IS 5511:1991

Covered electrodes for manual metal arc welding of cast Sep 2008 iron_(first revision)

29

IS 5687:1970

Glossary of terms relating to welding of plastics

30

IS 5856:1991

Corrosion and heat resisting chromium-nickel steel solid Sep 2008 welding rods, bare electrodes (first revision)

31

IS 5857:1970

Nickel and nickel alloy bare solid welding rods and electrodes

32

IS 5897:1985

Aluminium and aluminium alloy welding rods and wires Sep 2008 and magnesium alloy welding rods (first revision)

33

IS 5898:1970

Copper and copper alloy bare solid welding rods and electrodes

Sep 2008

34

IS 5922:1970

Qualifying tests for welders engaged in aircraft welding

Sep 2008

35

IS 6016:1982

Hose connection for welding and cutting equipment (first Mar 2006 revision)

36

* IS 6419:1996

37 38

Sep 2008

Mar 2010

IS 6431:1971

Tolerances on dimensions of plates cut by flame

Sep 2008

IS 6560:1996

Molybdenum and chromium-molybdenum low alloy steel Mar 2010 welding rods and bare electrodes for gas shielded arc welding (first revision)



36

1

Sep 2008

Welding rods and bare electrodes for gas shielded arc welding of structural steel (First revision)


1

1

39

* IS 6901:2009 / ISO 2503:1998

40

IS 7273:1974

41

* IS 7280:1974

42

IS 7303:1974

Covered electrodes for surfacing of metal by manual arc Sep 2008 welding

43

IS 7307(Part 1):1974

Approval tests for welding procedures Part 1 fusion welding of steel

Sep 2008

44

IS 7310(Part 1):1974

Approval tests for welders working to approved welding procedures Part 1 fusion welding of steel

Mar 2011

45

IS 7318(Part 1):1974

Approval tests for welders when welding procedure approval is not required Part 1 Fusion welding of steel

Sep 2008

46

IS 7318(Part 2):1974

Part 2 TIG or MIG welding of aluminium and its alloys

Sep 2008

Manual blow pipes for welding and cutting

Sep 2008

Specification for pressure regulators for gas cylinders used in welding, cutting and related processes (first revision)

Mar 2006

1

Method of testing fusion welded joints in aluminium and Sep 2008 aluminium alloys Bare wire electrodes for submerged arc welding of structural steels

Sep 2008

1

47

* IS 7653:1975

48

IS 8363:1976

Bare wire electrodes for electroslag welding of steels

Sep 2008

49

IS 8484:1998

Metal powders welding electrodes (first revision)

Mar 2010

50

IS 8666:1977

Copper and copper alloy covered electrodes for manual Sep 2008 metal arc welding

51

IS 8736:1977

Nickel and nickel alloy covered electrodes for metal arc Sep 2008 welding

52

IS 9495:1980

Test for brazeability of brazing alloys

Sep 2008

53

** IS 10793:1983 / ISO 6520:1982

Classification of defects in metallic fusion welds with explanations

Mar 2011

54

* IS 10803:1984

55

IS 10811:1984

Oxygen and acetylene manifold regulators for welding, cutting and related processes

Mar 2011

56

IS 10842:1984

Testing and evaluation procedure for Y groove crackability test

Mar 2011

57

IS 11368(Part 1):1985

Comparison of Indian and overseas classification and Sep 2008 coding of welding filler materials Part 1 Flux coated mild steel and medium tensile steel electrodes for manual metal arc welding

1

Method of determination of diffusible hydrogen content of Sep 2008 deposited weld metalfrom covered electrodes in welding mild and low alloy steels

1

58

** IS 11802:1986


Method of sampling and preparation of weld pad for Mar 2006 chemical analysis of weld metal from covered electrodes for manual metal arc welding


37

1

59

IS 13007:1991 | 6848:1984

Tungston electrodes for inert gas shielded arc welding and for plasma cutting and welding

Sep 2008

60

IS 13043:1991 | 2401:1972

Covered manual metal arc welding electrodes Determination of efficiency , metal recovery and depositin co-efficient

Sep 2008

61

IS 13851:1993

62

Storage and redrying of covered electrodes before use - Mar 2006 recommendations

IS 15387:2003 / ISO 5830:1984 FINALISED DRAFTS UNDER PRINT

Resistance Spot Welding - Male Electrode Caps

1

DOC.MTD 11(4741)

Gas welding equipment - Hose connections for equipment welding, cutting and allied processes (ISO 3253) (second revision IS 6016)

2

DOC.MTD 11(4991) / ISO 9539:1988

3

DOC.MTD 11(4739)

Materials for equipment used in gas welding, cutting and allied processes Specification for classification and acceptance tests for bare solid wire electrodes and wire-flux combination for submerged arc welding of structural steel


DOC.MTD 11(5060)


Specification and qualification of welding procedures for metallic materials - General rules (based on ISO 15607)


38

Sep 2008

1

MTD 12 WELDING APPLICATIONS SECTIONAL COMMITTEE SCOPE - Standardization in the field of joining, surfaceing, repairing and thermal cutting application by arc welding, soldering, brazing friction welding, explosive, ultrasonic welding etc. LIAISON ISO/TC 44 Welding and allied processes Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


* SP:

ISI Handbook of manual metal-arc welding for welders

Sep 2008

2

* SP 12 : 1975

ISI Handbook for gas welders

Sep 2008

3

* SP 6(7) : 1972

Handbook for structural engineers simple welded girders Mar 2011

4

IS 816:1969

Code of practice for use of metal arc welding for general Sep 2008 construction in mildsteel (first revision)

1

5

IS 819:1957

Code of practice for resistance spot welding for light assemblies in mild steel

Sep 2008

1

6

IS 1024:1999

Code of practice for use of welding in bridges and structures subject to dynamic loading (first revision)

Feb 2005

7

IS 1261:1959

Code of practice for seam welding in mild steel

Sep 2008

8

IS 1323:1982

Code of practice for oxy-acetylene welding for structural Sep 2008 work in mild steels (second revision)

9

IS 2751:1979

Recommended practice for welding of mild steel plain and deformed bars for reinforced construction (first revision)

Sep 2008

10

* IS 2811:1987

Recommendations for manual tungsten inert gas arc welding of stainless steel (first revision)

Sep 2008

11

* IS 2812:1993

Recommendations for manual tungsten inert gas arc Sep 2008 welding of aluminium and aluminium alloys (first revision)

12

IS 3023:1965

Recommended practice for building up by metal spraying Sep 2008

13

IS 3525:1998

Metal arc welding for hull constructions of merchant ships in carbon and carbon-manganese steels (second revision)

14

IS 4353:1995

Submerged arc welding of mild steel and low alloy steels Mar 2011 - Recommendations (first revision)

15

IS 5139:1995

Repair of cast iron castings by oxy-acetlene and manual Mar 2011 metal arc welding - Recommendations (first revision)

16

IS 5530:2005

Recommendations for production rectification and repair Sep 2008 of steel castings by metal arc welding process (second revision)



39

Sep 2008

1

1

17

IS 6409:1971

Code of practice for oxy-acetylene flame cleaning

Sep 2008

18

IS 6916:1973

Code of practice for fabrication welding of steel castings Sep 2008

19

IS 8002:1976

Recommended procedure for welding of flexible PVC

Sep 2008

20

IS 8004:1976

Recommended procedure for welding of rigid PVC

Sep 2008

21

IS 8455:1977

Recommended procedure for welding of polythlene

Sep 2008

22

IS 8987:1978

Recommended practice for air carbon arc gauging and cutting

Sep 2008

23

IS 9006:1978

Recommended practice for welding of clad steels

Sep 2008

24

IS 9417:1989

Recommendations for welding cold worked bars for reinforced concrete construction (first revision)

Sep 2008

25

IS 9524:1980

Recommended procedure for repair welding of steel components by aluminothermic process

Jun 2007

26

IS 9595:1996

Metal arc welding of carbon and carbon manganese steels - Recommendations (first revision)

Jun 2007

27

IS 10178:1995

CO2 gas shielded metal arc welding of structural steels - Mar 2011 Recommendations (firstrevision)

28

IS 10186:1982

Recommendations for manual tungsten inert gas arc welding of copper and copper alloys

Sep 2008

29

IS 10234:1982

Recommendations for general pipeline welding

Sep 2008

30

* IS 10801:1984

Recommended procedure for heat treatment of welded fabrications

Sep 2008

31

* IS 11991:1986

Recommended practice for flash butt welding of tubes, rods and other sections in carbon and alloy steel

Sep 2008

32

IS 14289:1995

Manual tungsten inert gas arc welding of nickel and nickel alloys - Recommendations

Mar 2011

33

IS 14419:1996

Acceptance standards for radiographic examination of welds for ships - Recommendations

Sep 2008

34

IS 15326(Part 1):2003 / ISO 3834(Pt 1):1994

Quality requirement for welding -Fusion welding of Sep 2008 metallic material Part 1 Guidelines for selection and use

35

IS 15326(Part 2):2003 / ISO 3834(Pt 2):1994

Quality requirement for welding -Fusion welding of metallic material Part 2 Comprehensive quality requirements

Sep 2008

36

IS 15326(Part 3):2003 / ISO 3834(Pt 3):1994

Quality requirement for welding -Fusion welding of metallic material Part 3 Standards quality requirements

Sep 2008



40

1

1

1

37

IS 15326(Part 4):2003 / ISO 3834(Pt 4):1994

38

Quality requirement for welding -Fusion welding of Sep 2008 metallic material Part 4 Elementary quality requirements

IS 15327:2003 / ISO 14731:1997 39 IS 15728:2006 / 15620:2000 FINALISED DRAFTS UNDER PRINT

Welding coordination - Tasks and responsibility

Sep 2008

Welding - Friction welding of metallic materials

Sep 2008

1

DOC.MTD 12(4958)

Recommended practice for building up by thermal spraying (first revision of IS 3023)

2

DOC.MTD 12(4959)

Recommended practice for manual tungsten inert gas welding of copper and copper alloys (first revision of IS 10186)


DOC.MTD 12(5061)

Welding - Test for shop premiss in relation to welding and allied process - Part 1 General requirements (based on ISO 17652)

2

DOC.MTD 12(5062)

Welding - Test for shop primers in relation to welding and allied processes -Part 2: Welding properties of shop primers (based on ISO 17652-2)

3

DOC.MTD 12(5063)

Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (based on ISO 17652-3)

4

DOC.MTD 12(5064)

Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (based on ISO 17652-4)



41

MTD 13 ORES AND RAW MATERIALS SECTIONAL COMMITTEE SCOPE - Standardization in the field of ores and raw materials for metallurgical industry including their chemical instrumental analysis LIAISON ISO/TC 65 Manganse and chromium ores ISO/TC 102 Iron ores ISO/TC 129 Aluminium ores and minerals MTD 2, 29 Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 1405:2010

Methods of sampling of iron ores (third revision)

2

IS 1449:2010

Methods of sampling of mannganese ore (second revision)

3

IS 1473:2004

Methods of chemical analysis of manganese ores(first revision)

Nov 2009

4

IS 2109:1982

Methods of sampling of dolomite, limestone and other allied materias (first revision)

Nov 2008

5

IS 2245:1962

Methods of sampling quartizite

Nov 2008

1

6

IS 2246:1963

Methods of sampling of fluorspar (flourite)

Aug 2005

1

7

IS 3191:1968

Methods of sampling of cryolite and aluminium trifluoride Aug 2005

8

IS 4156:1967

Methods for sampling of barytes

Aug 2005

9

IS 4166:1967

Methods of sampling of ilmenite and rutile

Aug 2005

10

IS 4574:1989

Flourspar for use in metallurgical industries (second revision)

Nov 2008

11

IS 4763:2006

Manganese ore for production of ferromanganese (second revision)

12

IS 5442:1992

Classification of haematite iron ore (second revision)

Nov 2008

13

IS 5534:1969

Method for determination of specific surface area of powder ore samples

Nov 2008

14

IS 5842:1986

Method for measuring bulk density of iron oxides: lump ores,sinter and pellets(first revision) (superseding IS 5483)

Nov 2008

15

IS 5893:1989

Cryolite for use in aluminium industry for the aluminium industry (first revision)

Nov 2008

16

IS 5953:1985

Specification for bauxite for use in the production of alumina for the aluminium industry (first revision)

Nov 2008



42

1

1

17

IS 6495:1984

Method of tumbler test for iron oxides:lump ores,sinter and pellets (first revision)

18

IS 8167:1989

Method for determination of reducibility index of iron ore Aug 2005 oxides, lumps oore, sinter and pillets (first revision)

19

IS 8562:1977

Methods of sampling chrome ore

20

IS 8604:1977

Determination of compression strength of iron ore pellets Nov 2008 after reduction

21

IS 8624:1995

Method for determination of swelling index of iron ore pellets (first revision)

Oct 2006

22

IS 8625:1986

Determination of crushing strength of iron ore pellets (first revision)

Nov 2008

23

IS 9101:1979

Methods of sampling iron ore pellets

Nov 2008

24

IS 9592:1989

Aluminium trifluoride for use in aluminium industry (first revision)

Nov 2008

25

IS 9660:2001

Methods for determination of softening - melting characteristics of iron ore lumps/pellets/sinter (first revision)

Oct 2006

26

IS 9959:1981

Guidelines for iron ore sinters for iron making in blast furnace

Nov 2008

27

IS 9963:1981

Determination of shatter index of iron ore lumps, sinter and pellets

Nov 2008

28

IS 10345:2004

Flux grade limestone for use in steel plants (second revision)

Nov 2009

29

IS 10346:2004

Flux grade dolomite for use in steel plants (second revision)

Nov 2009

30

IS 10817:1984

Bauxite for refractory industry

Nov 2008

31

IS 10818:1984

Chromite for metallurgical industry

Nov 2008

32

IS 10819:1999

Chromite for refractory industry (first revision)

Aug 2005

33

IS 10823:2006

Methods for determination of thermal degradation index(TDI) and reduction degradation index(RDI) of i ron oxides:lump ore,sinter and pellets Section 1 Static degradation test Section 2 Dynamic degradation test (second revision)

34

IS 11211:1984

Methods of sampling rock phosphate

Nov 2008

35

IS 11281:2005

Manganese ore for use in iron and steel making (first revision)

Nov 2008

36

IS 11282:2000

Guidelines for laboratory pot-grate sintering test for iron Aug 2005 ore fines(first revision)



43

Nov 2008 1

Aug 2005

1

1

1

37

IS 11283:1985

Determination of softening point of iron oxides (in powder form):lump ore,sinterand pellets

38

IS 11292:1985

Determination of relative reducibility of iron oxides:lump Nov 2008 ore,sinter and pellets

39

IS 11321:1985

Graphite for graphite crucibles

Nov 2008

40

IS 11336:1985

Guidelines for heat hardened iron ore pellets for iron making in blast furnaces

Nov 2008

41

IS 11348:1989

Iron ore pellets - Apparent specific gravity, true specific Nov 2008 gravity and porosity - Method for determination apparent (first revision)

42

IS 11373:1985

Guidelines for laboratory disc pelletisation test for iron ore pellets

Aug 2005

43

IS 11607:1986

Methods of sampling iron ore sinters

Nov 2008

44

IS 11894:1986

Classification of magnetite iron ores,

Nov 2008

45

IS 11895:1986

Classification of manganese ore, ferruginous manganese Nov 2008 ore, silicious manganese ore and magniferrous iron ore

46

IS 11896:1986

Determination of apparent specific gravity, true specific Nov 2008 gravity and apparent porosity of iron ore lump and sinter

47

IS 11897:1986

Guidelines for methods to be adopted for minerelogical identification of iron oxides: lump ore, sinter and pellets

Nov 2008

48

IS 12394:1988

Method for Weathering test on iron ore sinter

Nov 2008

49

IS 12550:1988

Methods of determining particle size distribution of iron ore fines

Nov 2008

50

* IS 12595:1989

Classification of terminology for exploration of mineral deposits

Nov 2009

51

IS 12596:1989

Manganese ore sinter for blending for ferromanganese Nov 2009 production

52

IS 12871:1989

Copper concentrates - Methods of sampling

Aug 2005

53

* IS 13054:1991

Quartzite/quartz for the production of ferroalloys

Nov 2008

54

IS 13344:1992

Method for checking the bias of sampling of ores

Nov 2008

55

IS 13676:1993

Quartzite for iron making in blast furnace

Nov 2008

56

IS 13751:1993

Tungsten for hard metal industry

Nov 2008



44

Nov 2008

1

2

1

57

IS 14296:1995

Dolomite for refractory industry

Aug 2005

58

IS 14301:1995

Kyanite for refractory industry

Aug 2005

59

IS 14302:1995

Beach sand silimanite for refractory industry

Aug 2005

60

IS 14303:1995

Magnesite for refractory industry

Aug 2005

61

IS 14713:1999

Synthetic Alumina & Mulite grains for refractory industry Aug 2005

62

IS 14852:2000

Graphite for refractory industry

Aug 2005


DOC.MTD 13(4972) / ISO 12743:2006

2

DOC.MTD 13(4993)

Copper, lead, zinc and nickel concentrates - Sampling procedure for determination of metal and moisture content Iron ores - Experimental methods for checking the bias of sampling


DOC.MTD 13(4921)


Methods of chemical anslysis of iron ore Part 1 Determination of common constituents (first revision of IS 1493(Part 1)


45

MTD 14 FOUNDRY AND STEEL CASTING SECTIONAL COMMITTEE SCOPE - Standardization in the field of foundry materials, foundry practice and steel castings LIAISON ISO/TC 17/SC 11 Steel castings Sl. No. IS Number/ DOC Number

Title



IS 276:2000

Austenitic manganese steel castings (fifth revision)

Mar 2005

2

IS 1030:1998

Carbon steel castings for general engineering purposes(fifth revision)

Sep 2010

3

IS 1280:1975

Foundry moulding boxes of steel construction (second revision)

Dec 2008

1

4

IS 1305:1984

Graphite for use in foundry coatings (third revision)

Mar 2005

2

5

IS 1513:1980

Wooden Pattern equipment for foundries (second revision)

Dec 2008

2

6

IS 1752:1973

Coal dust for use in cast iron foundry (second revision)

Sep 2010

7

IS 1811:1984

Methods of sampling foundry sands (first revision)

Sep 2010

8

* IS 1918:1966

Methods of physical tests for foundry sands

Dec 2008

9

IS 1987:2002

High silica sand for use in foundry (second revision)

Dec 2007

10

IS 2644:1994

High tensile steel castings (fourth revision)

Sep 2010

11

IS 2707:1996

Carbon steel castings for surface hardening (fourth revision)

Dec 2007

12

IS 2708:1993

1.5 Percent manganese steel castings for general engineerig purposes (third revision)

Sep 2010

13

IS 2763:1999

Glossary of terms relating to foundry technology

Dec 2008

14

IS 2856:1999

Carbon steel castings for pressure containing parts suitable for fusion welding (fourth revision)

Sep 2010

15

IS 2985:1990

Steel castings for ships structure (third revision)

Sep 2010

16

IS 2986:1990

Steel castings for marine engines and boilers (second revision)

Sep 2010

17

IS 3018:1977

Standard silica sand for raw material testing in foundries Dec 2008



46

1

1

18

IS 3038:2006

Martensitic Stainless Steel and Alloy Steel Castings For Pressure Containing Parts Suitable For High Temperature Service(fourth Revision)

19

IS 3339:1975

Silica flour for use in foundries (first revision)

Dec 2008

20

IS 3343:1965

Natural moulding sand for use in foundries

Dec 2008

21

IS 3444:1999

Corrosion resistant alloy steel and nickel base castings for general applicatis (third revision)

Sep 2010

22

IS 4269:1981

Dextrin for use in foundries (first revision)

Dec 2008

23

IS 4475(Part 1):1986

Crane-suspended ladles for foundries Part 1 Dec 2008 Straight/taper sided geared ladles 0.25 to 10 tonnes for iron and steel foundries (second revision)

24

IS 4475(Part 2):1986

Cylindrical geared ladles 0.25 to 3.0 tonnes for iron foundries (second revision)

Dec 2008

25

IS 4475(Part 3):1989

Part 3 Straight/taper sided ladles 0.25 to 3.0 tonnes capacities for S.G. Iron foundries (second revision)

Dec 2008

26

IS 4475(Part 4):1988

Part 4 Taper sided non geared ladles 15 to 50 tonnes capacities for iron and steel foundries

Dec 2008

27

IS 4491:1994

Steel castings for high magnetic permeability (third revision)

Sep 2010

28

IS 4522:1986

Heat resistant alloy steel and nickel base castings (second revision)

Sep 2010

29

IS 4604:1975

Pattern plates for machine moulding boxes (first revision) Dec 2008

30

IS 4606:1983

Steel shots for use in foundries (first revision)

Dec 2008

31

IS 4683:1968

Chilled iron shot and grit for use in foundries

Dec 2008

32

IS 4843:1968

Code for designation of ferrous castings

Sep 2010

33

IS 4896:1992

One percent chromium steel castings for resistance to abrasion (second revision)

Dec 2007

34

IS 4897:1994

Deviations on untoleranced dimensions and mass of steel castings (third revision)

Sep 2010

35

IS 4898:1989

Steel castings for case carburizing (second revision)

Sep 2010

1

36

IS 4899:2006

Ferritic and martensitic steel casting for use at low temperature (third rev ision)

37

IS 4981:1984

Guide pins for foundry pattern plates (second revision)

Dec 2008

1

38

IS 4982:1984

Closing pins for foundry moulding boxes (second revision)

Dec 2008

1



47

1

39

IS 5032:1983

Recommended sizes of cupola furnace for foundry (second revision)

Mar 2005

40

* IS 5303:1974

Zircon flour for use in foundries (first revision)

Dec 2008

41

IS 5824:1970

Lancets for use in foundries

Dec 2008

42

IS 5841:1970

Flutted core cleaners for use in foundries

Dec 2008

43

IS 5850:1970

Star (triangular) cutters for use in foundries

Dec 2008

44

IS 5873:1970

Steel cut-wire shots for use in foundries

Dec 2008

45

IS 5904:1978

Steel chaplets for use in ferrous foundries (first revision) Dec 2008

46

IS 5981:1986

Sleekers for use in foundries (first revision)

Dec 2008

47

IS 5988:1970

Spring dowel sleeves (light and heavy patterns) for use in foundries

Dec 2008

48

IS 6013:1970

Trowels for use in foundries

Mar 2005

49

IS 6079:1989

Low alloy cast steel grinding media (second revision)

Sep 2010

50

IS 6366:1971

Sprue plugs for use in foundries

Sep 2010

51

IS 6376:1986

Pattern lifting pins and hooks for use in foundries (first revision)

Dec 2008

52

IS 6377:1971

Mellets for use in foundries

Dec 2008

53

IS 6378:1986

Pattern lifting and rapping plates (first revision)

Dec 2008

54

IS 6401:1986

Dowel pins for use in foundries (first revision)

Dec 2008

55

IS 6443:1971

Lifters and cleaners for use in foundries

56

IS 6447:1986

Vent wires for use in foundries (first revision)

Dec 2008

57

IS 6482:1971

Tempers and rammers for use in foundries

Sep 2010

58

IS 6601:1987

Permissible deviations in chemical composition for products analysis of steelcastings (first revision)

Sep 2010

59

* IS 6773:2008


Sodium silicate for use in foundries (second revision)


48

1

Jul 2006

1

60

IS 6788:1973

Chromite sand for use in foundries

Dec 2008

61

IS 6907:1992

Steel castings - Method of sampling (first revision)

Dec 2007

62

IS 7295:1974

Chamotte

Dec 2008

63

IS 7297:1974

Olivine sand and flour for use in steel foundries

Dec 2008

64

IS 7547:1987

Steel Nails used as internal chills in steel castings (first revision)

Dec 2008

65

IS 7806:1993

Martensitic and austenitic high alloy steel castings for high temperature service (second revision)

Feb 2004

66

IS 7899:2006

Alloy steel castings suitable for pressure services (third revision)

Sep 2010

67

IS 8092:1992

Code for inspection of surface quality of steel castings for valves, fittings and other piping components (visual method) (first revision)

Dec 2007

68

IS 8228:1976

Bauxite sand

Dec 2008

69

IS 8246:1976

Liquid resins for use in shell process in foundries

Dec 2008

70

IS 8250:1988

Foundry parting agents (first revision)

Dec 2008

71

IS 8779:1978

Core gums (sodium silicate based) for use in foundries

Dec 2008

72

* IS 8785:1978

Carbon dioxide core binder system (binder and breakdown agent) for use in foundries

Dec 2008

73

IS 8800:1997

Technical delivery conditions for steel castings (excluding investment casting) (third revision)

Sep 2010

74

IS 8939:1978

Code of practice for use of oxygen in Iron Steel,and non-ferrous metal foundries

Dec 2008

75

IS 8988:1978

Bauxite powder for foundry washes

Dec 2008

76

IS 9007:1978

Zircon sand for use in foundries

Dec 2008

77

IS 9008:1978

Core repairing paste for use in foundries

Dec 2008

78

IS 9009:1992

Foundry core oils (first revision)

79

IS 9139:1979

Malleable iron shots and grits for use in foundries

Dec 2008

80

IS 9541:1987

Cast CTC segments (first revision)

Dec 2007



49

1

Jul 2006 1

81

IS 9565:1995

Acceptance standards for ultrasonic inspection of steel castings(second revision)

Sep 2010

82

IS 9661:1980

Hand shank ladles

Dec 2008

83

IS 9674:1980

Test Methods for fluid self hardening sand

Dec 2008

Organic no bake binders for use in foundries

Dec 2008 Dec 2008

84

* IS 10032:1981

85

IS 10033:1991

Zircon and Graphite based core and mould washes (First Revision)

86

IS 10034:1981

Basic requirement for equipment for determining moistureDec 2008 content in foundry sand

87

IS 10091:1981

Iron oxide powder for use in foundries

Dec 2008

88

IS 10094:1998

Code of practice for pattern making by using expanded polystyrene material (first revision)

Sep 2010

89

IS 10214:1982

Methods of sampling bentonite

Dec 2008

90

IS 10343:1999

Carbon and low alloy steel investment castings for general applications (first revision)

Sep 2010

91

IS 10469:1983

Antipiping compound for foundry

Sep 2010

92

IS 10487:1983

Sand rammer

Sep 2010

93

IS 10498:1983

Apparatus for determining permeability of foundry sand

Dec 2008

94

IS 10504:1983

Exothermic feeding aid for foundry

Sep 2010

95

IS 10518:1983

Snap flask moulding boxes and jackets

Dec 2008

96

IS 10724:1990

Acceptancce standard for magnetic particle testing of steel casting (first revision)

Sep 2010

97

IS 10774:1993

Specification for corrosion resistant high alloy and nickel Sep 2010 base investment castings for general applications (first revision)

98

IS 10979:1984

Powder resins for use in shell process in foundries

Dec 2008

99

IS 11099:1984

Universal sand testing machines

Sep 2010

100

IS 11166:1993

Permissible deviations on dimensions, surface roughness and mass of steel castings made with investment casting process (first revision)

Sep 2010

101

IS 11266:1985

Flake resins for use in shell process in foundries

Dec 2008



50

1

1

1

102

IS 11286:1995

Corrosion resistant high alloy steel nickel base and cobaltSep 2010 base investment castings for severe applications

103

IS 11709:2007

Technical delivery conditions for investment castings of steel (second revision)

104

IS 11732:1995

Acceptance standards for dye penetrant inspection of steel castings (first revision)

Sep 2010

105

IS 11758:1994

Precipitation hardening stainless steel castings (first revision)

Sep 2010

106

IS 12006:1987

Metal pattern and epoxy resin pattern equipment for foundries

Dec 2008

107

IS 12117:1996

Norms for classification of steel foundries for quality assurance (first revision)

Dec 2007

108

IS 12272:1987

Divided blast cupola furnace

Feb 2003

109

IS 12424:1988

Hot box resin for use in foundries

Dec 2008

110

IS 12446:2007

Bentonite for use in foundries(first revision)

111

IS 12799:1989

Recommended practice for impregnation of castings

Sep 2010

112

IS 12880:1989

Guidelines for controlling foundry rejection

Sep 2010

113

IS 12938:1990

Acceptance standards for radiographic inspection of steel castings

Sep 2010

114

IS 12968:1991

Steel castings for crankshafts for marine engines

Dec 2007

115

IS 13100:1991

Pitch powder for use in cast iron foundry

Dec 2008

116

IS 13126:1991

Silicon carbide chills

Dec 2008

117

** IS 13505:1992

118

IS 15865:2009

Centrifugally cast high alloy steel and nickel base tubing Dec 2007 for pressure application at high temperature Extheromic and insulating sleeves for use in foundries


DOC.MTD 14(4961)

Specification for organic no bake (self-setting) binders for use in foundries(first revision of IS 10032)


DOC.MTD 14(5033)

Steel castings - General technical delivery requirements ( ISO 4990:2003)

2

DOC.MTD 14(5034)

Steel castings for pressure purposes (ISO 4991:2005)



51

1

1

DRAFT STANDARDS FORMULATED 1

DOC.MTD 14(5032)

Steel and iron castings - Visual examination of surface quality (ISO 11971:2008)

2

DOC.MTD 14(5031)

Specification for polyurethane cold box binders for use in foundries

STANDARDS UNDER REVISION




52

MTD 15 REFRACTORIES SECTIONAL COMMITTEE SCOPE - Standardization in the field of refractories LIAISON ISO/TC 33 Refractories Sl. No. IS Number/ DOC Number

Title



* SP 37 : 1987

Handbook for refractories Part 3 Cement Kiln Systems

Nov 2007

2

IS 8:1994

High heat duty fireclay refractories (fifth revision)

Aug 2006

3

IS 195:2005

Fireclay mortar for laying fireclay refractory bricks (third revision)

May 2010

4

IS 483:1972

Fireclay refractories for oil-fired boiler furnaces of naval Nov 2007 ships (first revision)

5

IS 484:1980

Silica refractories for general purposes (second revision) Nov 2007

6

IS 1292:1991

Silica mortar for laying silica bricks in furnaces (first revision)

Nov 2007

7

IS 1522:1998

Fireclay glass tank blocks (second revision)

Nov 2007

8

IS 1523:1972

Bottom pouring refractories for steel plants (first revision)

Nov 2007

9

IS 1524:1968

Refractory sleeves (first revision)

Nov 2007

10

IS 1525:1968

Ladle refractories for steel plants (first revision)

Nov 2007

11

IS 1526:1960

Sizes and shapes for firebricks

Nov 2007

12

IS 1528(Part 1):2010

Methods of sampling and physical tests for refractory materials Part 1 Determination of pyrometric cone equivalent (PCE) or softening point (third revision)

13

** IS 1528(Part 2):1974

14

IS 1528(Part 3):2010

15

** IS 1528(Part 4):1974

Determination of cold crushing strength (first revision)

16

IS 1528(Part 5):2007 / ISO 5014:1997

Methods of sampling and physical tests for refractory materials Part 5 Method for determination of modulus of rupture at ambient temperature of dense and insulating shaped refractory products (third revision)


1

Determination of refractoriness under load (first revision) Feb 2009 Determination of spalling resistance (third revision)


53

Feb 2009

1

17

IS 1528(Part 6):2010

Determination of permanent linear change change after reheating for shaped insulating and dense refractories (second revision)

18

IS 1528(Part 7):2010

Method of sampling and criteria for conformity (second revision)

19

Part 9 Determination of true density (fourth revision)

20

IS 1528(Part 9):2007 / ISO 5018:1983 IS 1528(Part 1):2010

21

** IS 1528(Part 10):1974

Determination of size of refractory bricks (first revision)

Feb 2009

22

IS 1528(Part 11):1993

Determination of wrapage (second revision)

May 2010

23

IS 1528(Part 12):2007 / ISO 5016:1997

Part 12 Method for determination of bulk density and true porosity of shaped insulating refractory products (second revision)

24

IS 1528(Part 13):2007 / ISO 12676:2000

Part 13 Determination of resistance to carbon monoxide (second revision)

25

** IS 1528(Part 14):1974

Sieve analysis (first revision)

26

IS 1528(Part 15):2007 / ISO 5017:1998

Part 15 Method for determination of bulk density, apparent porosity and true porosity of dense shaped refractory products (first revision)

27

IS 1528(Part 16):2007 / ISO 8894-2:1990

Part 16 Determination of thermal conductivity according to hot-wire method (parallel)

28

IS 1528(Part 17):1993 / ISO 8895:1986

Determination of cold crushing strength of shaped insulating refractory products

Sep 2004

29

IS 1528(Part 18):1993 / ISO 3187:1989 ** IS 1528(Part 19):1991

Determination of creep in compression

Sep 2004

Determination of thermal expansion

Feb 2009

31

IS 1528(Part 20):1993 / ISO 5013:1985

Determination of modulus of rupture at elevated temperature

Sep 2004

32

IS 1528(Part 21):2007 / ISO 8894-1:1987

Part 21 Determination of thermal conductivity according to hot-wire method (cross-assay)

33

IS 1528(Part 22):2007 / ISO 8841:1991

Part 22 Method for Determination of permeability to gases of dense shaped refractory products

30

Method of sampling and physical tests for refractory materials Pt 1 Determination of pyrometric cone equivalent (PCE) or softening poing (third revision)

Feb 2009

34

IS 1529:1971

Blast furnace refractories for steel plants (first revision) Nov 2007

35

IS 1748:1981

Sizes of graphite crucibles (first revision)

Nov 2007

36

IS 1749:2005

Burnt magnesite refractories - Specification (third revision)

Nov 2007



54

1

37

IS 1750:1995

Dead burnt pea magnesite (third revision)

Aug 2006

38

IS 1751:1984

Fireclay cupola refrectories (second revision)

Nov 2007

39

IS 2042:2006

Insulating bricks - Specification (second revision)

Feb 2002

40

IS 2043:1984

Siliceous fireclay refreatories (first revision)

Nov 2007

41

IS 2044:2005

Silimanite refractories for glass melting tank furnaces (second revision)

May 2010

42

IS 3304:2005

Specification for Burnt magnesite-chrome refractories for general purposes (first revision)

Nov 2007

43

IS 3305:2005

Specification for Burnt chrome-magnesite refractories for general purposes(first revision)

Nov 2007

44

IS 4041:2006 / ISO 836:2001

Glossary of terms relating to refractory materials (first revision)

45

IS 4564:1968

Fireclay nozzles

Nov 2007

46

IS 4565:1968

Fireclay stoppers

Nov 2007

47

IS 4801:1980

Chemically-bonded magnesite-chrome refractories for roof lining (first revision)

Nov 2007

48

IS 4812:1996

Silica refractories for coke oven (second revision)

Aug 2006

49

IS 4813:1980

Chemically-bonded chrome-magnesite refractories for general purposes (first revision)

Nov 2007

50

IS 4814:1980

Chemically-bonded magnesite-chrome refractories for general purposes (first revision)

Nov 2007

51

IS 5495:1969

Sizes and shapes for firebricks (300 mm and higher sizes)

Nov 2007

52

IS 6727:1972

Fireclay checker bricks for open hearth furnace

Nov 2007

53

IS 6728:1972

Recuperator tubes, tiles and collars for soaking pits in steel plants

Nov 2007

54

IS 7199:2008

Blast furnace stove refractories

Nov 2007

55

IS 8953:2006

Specificaiton for 62 percent alumina bricks and blocks for blast furnaces (first revision)

Nov 2007

56

IS 8966:1978

Megnesite nozzles

Nov 2007

57

IS 8977:1978

Clay bonded graphite crucibles

Nov 2007



55

1

1

58

IS 9010:1978

Super heat duty fireclay refractories

Nov 2007

59

IS 9929:1981

Method of determining life of graphite crucibles

Nov 2007

60

IS 9930:2005

Zircon refractories for glass furnace application (first revision)

May 2010

61

** IS 10047:1981

62

IS 10551:2005

63

** IS 10570:1983

64

Methods for testing refractory ramming masses

Feb 2009

Zircon mullite refractories for glass furnace applications (first revision)

May 2010

Methods for testing refractory castables

Feb 2009

IS 10607:1983

Refractories for cement rotary kilns

Nov 2007

65

IS 11036:1984

Graphite stopper heads

Nov 2007

66

** IS 11452:1985

Method of testing air-setting refractory mortars

Feb 2009

67

IS 12847:1997

Carbon bonded silicon carbide crucibles (first revision)

Nov 2007

68

IS 12893:2006 / ISO 1146:1988

Pyrometric reference cones for laboratory use of specification (first revision)

Nov 2007

69

IS 12951:2006

Specification for mica Insulation Bricks for High temperature application (first revision)

Nov 2007

70

IS 13150:1991

Silica mortars for laying silica bricks in coke ovens

Nov 2007

71

IS 13173:1991

Code of practice for handling and usage of graphite and Nov 2007 silicon carbide crucibles

72

IS 13185:1991

Method of test for determination of drying shrinkage of refractory mortars

Nov 2007

73

IS 14313:1995

70 Percent alumina bricks - specification

Aug 2006

74

IS 14374:1996

Refractories for chimney - Recommendation

Aug 2006

75

IS 14406:1996

Refractories for forge and heat treatment furnaces _ Recommendations

Aug 2006

76

IS 14447:1997

Refractories for use in foundry industry Recommendations

Nov 2007

77

IS 15507:2004

Basic insulating coating material for application in tundish May 2010 at steel plants - Specification

78

IS 15508:2004

Refractory mass (Basic Gunning) for Steel Plant Application - Specification



56

May 2010

79

IS 15541:2005

Specification for low cement and ultra low cement castable for general purposes


DOC.MTD 15(5018) / ISO 8895:2004

2

DOC.MTD 15(4843)

Part 2 Determination of refractoriness under load (second revision of IS 1528(Pt 2)

3

DOC.MTD 15(4845)

Determination of cold crushing strength of dense shaped refractory products (second revision of IS 1528(Pt 4)

4

DOC.MTD 15(4848)

Method of testing refractory castables

5

DOC.MTD 15(4857)

Specification for high alumina refractory cement

6

DOC.MTD 15(4861)

Method of test for dense shaped refractory product Part 23 Determination of resistance to abrasion at ambient temperature


Methods of sampling and physical tests for refractory materials Part 17 shaped insulating refractory products Determination of old crushing strength IS 1528 (Part 17):1993




57

MTD 16 ALLOY STEELS AND FORGING SECTIONAL COMMITTEE SCOPE - Standardization in the field of alloy & special steels and forging including/chemcal/instrumental analysis, classification designaiton and coding of related steels MTD 4, ISO/TC 17 Steel, SC 4 and SC & LIAISON MTD 1 and 4, ISO/TC 17 Steel Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 963:1958

Chrome molybdenum steel bars and rods for aircraft purposes

May 2009

2

2

IS 1570(Part 1):1978

Schedules for wrought steels Part 1 Steels specified by May 2009 tensile and/or yield properties (first revision)

1

3

IS 1570(Part 2/Sec 1):1979

Schedules for wrought steels Part 2 Carbon steels May 2006 (unalloyed steels) Section I Wrought products (other than wire) with specified chemical composition and related properties (first revision)

4

IS 1570(Part 2/Sec 2):1988

Schedules for wrought steels Part 2 Carbon steels (unalloyed steels) Section IICarbon steel wires with related properties (first revision)

5

IS 1570(Part 3):1979

Schedules for wrought steels Part 3 Carbon and carbon May 2009 manganese free cutting steels (first revision)

6

IS 1570(Part 4):1988

Schedules for wrought steels Part 4 Alloy steels (Alloy May 2006 constructional and spring steels) with specified chemical composition andd mechanical properties(firstrevision)

7

IS 1570(Part 5):1985

Schedules for wrought steels Part 5 Stainless and heat May 2009 resisting steels (secondrevision)

8

IS 1570(Part 6):1996

Schedules for wrought steels Pt 6 Carbon and alloy tool May 2006 steels (first revision)

9

IS 1570(Part 7):1992

Schedule for wrought steels Part 7 Steels for elevated temperature service (creep resistant steels)

May 2009

10

IS 1870:1965

Comparison of Indian and overseas standards for wrought steels for general engineering purposes

May 2009

11

IS 1871:1965

Commentary on Indian Standard schedules for wrought May 2006 steels for general engineering purposes

12

IS 1871(Part 1):1987

Commentary on Indian Standard Schedules for wrought May 2009 steels Part 1 Steels specified by Tensile and/or yield properties (Complementary to IS 1570(Part 1):1978) (first revision)

13

IS 1871(Part 2):1987

Commentary on Indin Standard Schedules for wrought May 2009 steels Part 2 Carbon steels (unalloyed steels) (Complementary to IS 1570 Part 2):1979) (first revision)

14

IS 1871(Part 3):1987

Commentary on Indian Standard Schedules for woruhgt May 2009 steels Part 3 Carbon and carbon-manganese free cutting steels_(complementary to IS 1570(part 3):1979)(firstrevision)



58

May 2009

15

IS 1875:1992

Carbon steel billets, blooms, slabs and bars for forgings May 2009 (fifth revision)

2

16

IS 1956(Part 6):1976

Forging (including drop forging)

2

17

IS 2004:1991

Carbon steel forgings for general engineering purposes May 2006 (third revision)

18

IS 2611:1964

Carbon chromium molybdenum steel forgings for high temperature services

May 2006

19

IS 3261:1980

Carbon steel forgings for shipbuilding industry (first revision)

May 2006

20

IS 3445:1992

Forged steel rolls (First Revision)

May 2009

21

IS 3469(Part 1-3):1974

Tolerances for closed die steel forgings (first revision)

May 2006

22

IS 3479:1966

General requirements for steel drop, upset and press forgings

May 2006

23

IS 3739:1987

Dimensional tolerances for carbon and alloy constructional steel products (first revision)

May 2006

24

* IS 3748:1990

Tool and die steels (second revision) (Superseding IS 3749)

May 2006

25

* IS 3930:1994

Flame and induction hardening steels (second revision) May 2009

26

IS 4367:1991

Alloy steel forgings for general industrial use (first revision)

May 2009

1

27

IS 4368:1967

Alloy steel billets, blooms and slabs for forging for general engineering purposes

May 2009

1

28

IS 4397:1999

Cold rolled carbon steel strip for ball and roller bearing cages (first revision)

May 2009

1

29

* IS 4398:1994

30

IS 4430:1979

31

May 2006

Carbon chromium steel for the manufacture of ball,rollers May 2009 and bearing races (second revision) May 2009

2

* IS 4431:1978

Carbon and carbon manganese free cutting steels (first May 2009 revision)

2

32

* IS 4432:1988

Case hardening steels(first revision)

May 2009

33

IS 4882:1979

Low carbon steel wire for rivets for use in bearing industry (first revision)

May 2009

2

34

IS 5489:1975

Carburizing steels for use in bearing industry (first revision)

May 2009

2

35

* IS 5517:1993

Steels for hardening and tempering (second revision)

May 2009


Mould steels (first revision)


59

36

IS 5518:1996

Steels for die blocks for drop forging (second revision)

May 2006

37

IS 5522:1992

Stainless steel sheets and strips for utensils (second revision)

May 2009

38

IS 5651:1987

Steels for pneumatic tools (first revision)

39

IS 6527:1995

Stainless steel wire rod (first revision)

May 2009

40

IS 6528:1995

Stainless steel wire (first revision)

May 2006

41

IS 6529:1996

Stainless steel blooms, billets and slabs for forging (first May 2006 revision)

42

IS 6603:2001

Stainless steel bars and flats (first revision)

May 2009

43

IS 6911:1992

Stainless steel plate, sheet and strip (first revision)

May 2009

44

* IS 7291:1981

High speed tool steels (first revision)

May 2009

45

* IS 7494:1981

Steel for valves for internal combustion engines (first revision)

May 2009

46

IS 8748:1978

Forged/rolled CTC segments

May 2006

47

IS 8811:1998

Method for spectrographic analysis of plain Carbon and May 2006 low alloy Steels by the point to plane spark technique (first revision)

48

IS 9100:1979

Methods of sampling steel forgings

May 2006

49

IS 9175(Part 1):1979

Rationalized steels for the automobile and ancillary industry, Part I chemical composition

May 2009

50

IS 9175(Part 2):1985

Rationalized steels for the automobile mechanical and physical properties Part 2 15C8 Grade steel

May 2009

51

IS 9175(Part 3):1985

25C8 Grade Steel

May 2009

52

IS 9175(Part 4):1985

30C8 Grade Steel

May 2009

53

IS 9175(Part 5):1985

35C8 Grade Steel

May 2009

54

IS 9175(Part 6):1986

40C8 Grade Steel

May 2009

55

IS 9175(Part 7):1986

45C8 Grade steel

May 2009

56

IS 9175(Part 8):1985

55C8 Grade steel

May 2009



60

2

1

1

57

IS 9175(Part 9):1985

11C10S25 Grade steel

May 2009

58

IS 9175(Part 10):1985


May 2009

59

IS 9175(Part 11):1985


May 2009

60

IS 9175(Part 12):1988

35C16Mo35Si5 Grade steel

May 2009

61

IS 9175(Part 13):1987


May 2009

62

IS 9175(Part 15):1987

37C15 Grade steel

May 2009

63

IS 9175(Part 16):1987

35Mn6Mo3 Grade steel

May 2009

64

IS 9175(Part 17):1987

35Mn6Mo4 Grade steel

May 2009

65

IS 9175(Part 18):1987

15Cr3 Grade steel

May 2009

66

IS 9175(Part 19):1986

46Mn5Cr4 Grade steel

May 2009

67

IS 9175(Part 20):1986

20MnCr5 Grade steel

May 2009

68

IS 9175(Part 21):1987

40Cr4 Grade steel

May 2009

69

IS 9175(Part 22):1987

40Cr4Mo3 Grade steel

May 2009

70

IS 9175(Part 23):1987

25Cr13Mo6 Grade steel

May 2009

71

IS 9175(Part 24):1987

35NiSCr2 Grade steel

May 2009

72

IS 9175(Part 25):1987

15Ni5Cr4Mol Grade steel

May 2009

73

IS 9175(Part 26):1986

16Ni3Cr2 Grade steel

May 2009

74

IS 9175(Part 27):1987

15Ni7Cr4Mo2 Grade steel

May 2009

75

IS 9175(Part 28):1987


May 2009

76

IS 9175(Part 29):1987


May 2009

77

IS 9175(Part 30):1987

20Ni7CrMo2 Grade steel

May 2009



61

78

IS 9175(Part 31):1987

20Ni7Mo2 Grade steel

May 2009

79

IS 9175(Part 32):1987

20NiCrMo2 Grade steel

May 2009

80

IS 9175(Part 33):1988

42Cr6V10 Grade steel

May 2009

81

IS 9175(Part 34):1986

14CrNi6 Grade steel

May 2009

82

IS 9294:1979

Cold rolled stainless steel strips for razor blades

May 2009

2

83

IS 9516:1980

Heat resisting steel

May 2009

1

84

IS 9683:1980

Carbon and low alloy steel forgings for fired and unfired May 2006 pressure vessels

85

IS 9684:1980

Technical conditions for the supply of hot rolled billets blooms, slabs and bars for closed die forgings

86

IS 9879:1998

Method for spectrographic analysis of austenitic and ferritic Stainless steels by the point to plane technique (first revision)

87

IS 10604(Part 1):1983

Machining allowances and tolerances for open die steel May 2006 forgings Part 1 carbon and low alloy steel forgings

88

IS 10604(Part 2):1983

Machining allowances and tolerances for open die steel May 2006 forgings Part 2 High alloy steel forgings

89

IS 10631:1983

Stainless steel for welding electrode core wire

90

IS 10632(Part 1):1983

Non Magnetic stainless steels for electrical applications May 2009 Part 1 General requirements

91

IS 10632(Part 2):1983

Specific requirements for binding wire

May 2009

92

IS 10632(Part 3):1983

Specific requirements for sheets, strips and plates for electrical appliances

May 2009

93

* IS 11169(Part 1):1984

94

IS 11169(Part 2):1988

Steels forcold heading/cold extrusion Part 2 Stainless steel

May 2009

95

IS 11185:1984

Technical supply conditions for hot rolled and forged steel bars for use in machine tool industry

May 2009

96

IS 11946:1987

Soft magnetic iron strips

May 2006

97

IS 11947:1987

Soft magnetic iron rods, bars, flats and sections

May 2006

98

IS 11952:1986

Steels for piston pins (Gudgeon pins)

May 2009


May 2006

May 2009

Steels for cold heading/cold extrusion application Part 1 May 2009 Wrought carbon and low alloy steels


62

1

99

IS 12045:1987

Alloys used in electrical resistance metallic heating elements

May 2006

100

IS 12145:1987

Quenched and tempered alloy steel forgings for pressure vessels

Mar 2001

101

IS 12146:1987

Carbon manganese steel forgings for pressure vessels

May 2006

102

IS 12390:1988

Iron nickel alloy 36 for ceramic sealing

May 2009

103

IS 12391:1988

Iron nickel controlled expansion sealing alloys

May 2009

104

IS 12549:1988

Iron nickel cobalt sealing alloys

May 2009

105

IS 12658:1989

Grinding media rolled/forged carbon and carbonchromium steels

May 2006

106

IS 12836:1989

36-Nickel iron soft magnetic rods

May 2009

107

IS 12881:1990

36-Nickel iron soft magnetic striips

May 2009

108

IS 12882:1990

48-Nickel iron soft magnetic strip

May 2009

109

IS 13352:1992

Stock for forgings produced f rom continuously bast billets , blooms, slabs andbars - specification

May 2009

110

IS 13387:1992

Tool steel forgings for metal forming

May 2009

111

IS 13795(Part 1):1993

Glossary of terms for special alloys Part 1 Soft magnetic May 2009 marterials

112

IS 14331:1995

Steels for high temperature bolting applications

May 2006

113

IS 14652:1999

18% Nickel maraging steel bars & rods

May 2006

114

IS 14698:1999

Carbon and low alloy billets, blooms and slabs for manufacture of shell bodies af shots used in defence services - Specification

May 2006


DOC.MTD 16(4925)


Low nickel austenitic stainless steel sheet & strip for utensils and kitchen appliances - Specification


63

1

MTD 19 STEEL TUBES, PIPES AND FITTINGS SECTIONAL COMMITTEE SCOPE - Standardization in the field of steel tubes, pipes and fittings including classification, designation and coding of steel tubes LIAISON ISO/TC 5 Ferrous metal pipes and metallic fittings ISO/TC 17 Steel ISO/TC 67/SC 2 Pipeline transportation system ISO/TC 67/SC 5 Casing, tubing and drilling pipe Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 1161:1998

Steel tubes for structural purposes (fourth revision)

Mar 2009

3

2

IS 1239(Part 1):2004

Steel Tubes, tubulars and other wrought steel fittings Specification (Part 1) Steel tubes (Sixth revision)

Feb 2010

4

3

* IS 1239(Part 2):1992

Mild steel tubes, tubulars and other wrought steel fittings, Mar 2009 Part 2 Mild steeltubulars and other wrought steel pipe fittings (fourth revision)

7

4

IS 1956(Part 8):1976

Glossary of terms relating to iron and steel - Part 8 Steel tubes and pipes

Mar 2009

5

IS 1978:1982

Line pipe (second revision)

Mar 2009

6

IS 1979:1985

High test line pipe (second revision)

Mar 2009

7

IS 2039(Part 1-3):1991

Steel tubes for bicycle and allied purposes (second revision)

Mar 2009

1

8

IS 2416:1986

Boiler and supherheater tubes for marine and naval purposes (first revision)

Mar 2009

1

9

IS 3074:2005

Steel tubes for automotive purposes (second revision)

Dec 2010

3

10

IS 3183:2007 / ISO 3183:2007

11

IS 3589:2001

Steel pipes for water and sewage (168.3 to 2540 mm outside diameter) (third revision)

Nov 2006

4

12

IS 3601:2006

Steel tubes for mechanical and general engineering purposes (second revision)

13

IS 4270:2001

Steel tubes used for water wells (third revision)

Nov 2006

1

14

IS 4711:2008

Methods for sampling of steel pipes, tubes and fittings (second revision)

15

IS 4712:1984

Forged steel,socket-welding fittings (first revision)

Mar 2009

1


2

Petroleum and natural gas industries - steel pipe for pipeline transporation systems (Amalgmation of IS 1978 & IS 1979)


64

16

IS 4923:1997

Hollow steel sections for structural use (second revision) Mar 2009

17

IS 5429:1979

Dimensions for steel tubes for automotive purposes (first Mar 2009 revision)

18

IS 5433:1969

Oil well steel casing pipes and couplings

Mar 2009

19

IS 5504:1997

Spiral welded pipes (first revision)

Mar 2009

4

20

IS 6286:1971

Seamless and welded steel pipes for sub-zero temperature service

Mar 2009

1

21

IS 6392:1971

Steel pipe flanges

Mar 2009

1

22

IS 6630:1985

Seamless ferritic alloy steel pipes for high temperature steam service (first revision)

Mar 2009

23

IS 6631:1972

Steel pipes for hydraulic purposes

Mar 2009

1

24

IS 6647:1972

Drill pipes for use in oil or natural gas wells

Mar 2009

1

25

IS 6913:1973

Stainless steel tubes for the food and beverage industry Mar 2009

26

IS 7138:1973

Steel tubes for furniture purposes

Mar 2009

2

27

IS 7174:1974

Carbon steel tubes for use on board ships for working pressure 0.7 to 1.7 N/mm

Mar 2009

1

28

IS 8036:1976

Mild steel transformer cooling tubes

Mar 2009

2

29

IS 8119:1976

Copper brazed steel tubing

Mar 2009

1

30

IS 9158:1979

Cold-drawn high pressure fluid power cylinder tubes

Mar 2009

1

31

IS 9295:1983

Steel tubes for idlers for belt conveyors (first revision)

Mar 2009

3

32

IS 10577:1982

Lancing pipes

Mar 2009

1

33

IS 11428(Part 1-3):1985

Wrought carbon steel butt welding pipe fittings

Mar 2009

34

IS 11714(Part 1-5):1986

Steel tubes for heat exchangers

Mar 2009

35

IS 11722:1986

Thin walled flexible quick coupling pipes

Mar 2009

36

IS 12620:1989

Seamless steel tubes for manufacturing high pressure gas cylinders

Mar 2009



65

5

4

37

IS 12791:1989

High carbon chromium (bearing) steel tubes for the manufacture of bearing races

Mar 2009

38

IS 13197:1991

Grooved couplings - Specification

Mar 2009


DOC.MTD 19(4999)


Steel tubes, tubular and other wrought steel fittings Part 2 Steel pipe fittings (fifth revision of IS 1239 (Part 2 )




66

MTD 21 NON-DESTRUCTIVE TESTING SECTIONAL COMMITTEE SCOPE - Standardization in the field of non-destructive testing LIAISON ISO/TC 135 Non-destructive testing MTD 11 & 17 Sl. No. IS Number/ DOC Number

Title

Reaffirm Date


IS 1182:1983

Recommended practice for radiographic examination of Feb 2010 fusion welded butt joints in steel plates (second revision)

2

IS 2417:2003

Glossary of terms relating to ultrasonic testing (second revision)

Aug 2008

3

IS 2478:1991

Glossary of terms relating to industrial radiography (second revision)

Feb 2010

4

IS 2595:2008

Code of practice for radiographic testing (second revision)

5

IS 2953:1985

Glossary of terms used for interpretation of welds and castings radiographs (first revision)

Feb 2010

6

IS 3415:1998

Glossary of terms used in magnetic particle flaw detection (second revision)

Aug 2008

7

IS 3657:1978

Radiographic image quality indicators(first revision)

Feb 2010

8

IS 3658:1999

Code of practice for liquid penetrant flaw detection (second revision)

Feb 2010

9

IS 3664:1981

Code of practice for ultrasonic pulse echo testings by contact and immersion methods (first revision)

Aug 2008

10

IS 3703:2004

Code of practice for magnetic particle flaw detection (second revision)

Feb 2010

11

IS 4225:2004

Recommended practice for straight beam ultrasonic testing of steel plates (second revision)

Feb 2010

12

IS 4260:2004

Recommended practice for ultrasonic testing of butt welds in ferritic steel (third revision)

Aug 2010

13

IS 4853:1982

Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (first revision)

Aug 2008

14

IS 4904:2006

Calibration blocks for use in ultrasonic non-destructive testing (fourth revision)

15

* IS 5334:2003

Code of practice for magnetic particle flaw detection of welds (first revision)

16

IS 6394:2006


Code of practice for ultrasonic testing of seamless metallic tubular products by contact and immersion methods (second revision)


67

Aug 2008

No. of Amd.

17

IS 6398:1983

Code of practice for eddy current testing of ferrous seamless pipes and tubes (first revision)

Feb 2010

18

IS 6410:1991

Specification for magentic flaw detection inks and powders (first revision)

Feb 2010

19

IS 6752:1991

Code of practice for magnetic particle flaw detection of ferrous pipes and tubes (first revision)

Feb 2010

20

IS 7343:1986

Code of practice for ultrasonic testing of ferrous welded Feb 2010 pipes and tubular products (first revision)

21

IS 7666:1988

Recommended procedure for ultrasonic examination of ferritic castings of carbon and low alloy steel (first revision)

22

IS 7743:2006

Recommended practice for magnetic particle testing and inspection of steel forgings (first revision)

23

IS 7810:1999

Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (first revision)

Feb 2010

24

IS 8780:2004

Code of practice for non destructive testing of steel castings(first revision)

Feb 2010

25

IS 8791:1978

Code of practice for ultrasonic flaw detection of ferritic steel forgings

Aug 2008

26

IS 8973:1991

Glossary of terms relating to leak detection techniques (first revision)

Feb 2010

27

IS 9902:2004

Recommended practice for leak testing (first revision)

Feb 2010

28

IS 10543:1983

Method for dry powder magnetic particle testing

Feb 2010

29

IS 11612:2004

Code of practice for eddy current testing of non-ferrous seamless pipes and tubes (first revision)

Feb 2010

30

IS 11626:2005

Recommended practice for ultrasonic testing and Feb 2010 acceptance for forging quality steel blooms (first revision)

31

IS 11630:2005

Method for ultrasonic testing of steel plates for pressure Feb 2010 vessels and special applications (first revision)

32

IS 11655:1986

Procedure for stray flux testing of ferrous magnetic seamless steel tubular products

Feb 2010

33

IS 12147:1987

Recommended practice for wet magnetic particle examination

Aug 2008

34

IS 12148:1987

Guidelines for requirements for non-destructive testing agencies

Aug 2008

35

IS 12666:1988

Methods for performance assessment of ultrasonic flaw Aug 2008 detection equipment

36

* IS 12666:1988


Methods for performance assessment of ultrasonic flaw detection equipment


68

Feb 2010

1

37

* IS 12666:1988

38

IS 12710:1989

Glossary of terms used in accoustic emission testing

Feb 2010

39

IS 12782:1989

Guidelines for using thermography for monintoring of industrial components

Feb 2010

40

IS 12860:1989

Method for determination of metallic coating thickness by Feb 2010 X-ray fluorscence techniques

41

IS 12889:1989

Performance evaluation of liquid penetrants

42

IS 12965:1990

Glossary of terms used in eletromagnetic (eddy current) Feb 2010 testing

43

IS 13190:1991

Recommended practice for eddy current examinationn by rotating probe method of round steel bars

Feb 2010

44

IS 13805:2004

General standards for qualification and certification of non destructive testing personnel (first revision)

Feb 2010

45

IS 14669:1999

Thermal neutron radiography - Recommendations

Feb 2010

46

IS 14670:1999

Recommended practice for aceustic emission inspection Feb 2010 during hydrostatic pressure testing of system

47

IS 14800:2000

Recommended practice for rorting of ferrous/nonferrous materials using electromagnetic (eddy current) technique

48

IS 15404:2003

Recommended practice for measuring ultrasonic velocity Aug 2008 in materials

49

IS 15435:2003

Recommended practice for measuring thickness using ultrasonic method

Aug 2008

50

IS 15452:2004

Flaw size using DGS Method - Specification

Feb 2010

51

IS 15468:2004

Performance evaluation of ultrasonic thickness gauge

Feb 2010

52

IS 15531:2004

Recommended practice for ultrasonic testing of weld fillets of non-linear joints

Feb 2010

53

IS 15539:2004

Recommended practice for magnetic particle examinationFeb 2010 of steam turbine rotor blades

54

IS 15540:2004

Recommended practice for eddy current testing of installed non-ferromagnetic heat exchangers tubing using dual frequency method

Feb 2010

55

IS 15643:2006

Code of practice for non-destructive examination of ploymer based composite materials

Feb 2010

56

IS 15775:2008

Glossary of terms for signal analysis related to nondestructive testing


Methods for performance assessment of ultrasonic flaw detection equipment


69

Feb 2010

Feb 2010

1


DOC.MTD 21(4997)

Recommended practice for non-destructive testing of concrete structure using impace-echo technique

2

DOC.MTD 21(4995)

Recommended practice for wet magnetic partile testing ( IS 12147)

3

DOC.MTD 21(4994)

Magnetic flow detection inks and powders Specifications (second revision of IS 6410)

4

DOC.MTD 21(4932)

Non-destructive testing - Metallographic replica technique of surface examination (adoption of ISO 3057)

5

DOC.MTD 21(4933)

Non-destructive testing radiographic illuminators minimum requirements (adoption of ISO 5580)


DOC.MTD 21(5035)


Guidelines for selection of aids for visual examination


70

MTD 22 METALLOGRAPHY AND HEAT-TREATMENT SECTIONAL COMMITTEE SCOPE - Standardization in the field of metallography and heat-treatment of ferrous and non-ferrous metals and alloys LIAISON MTD 4,6 & 16 Sl. No. IS Number/ DOC Number

Title

Reaffirm Date


IS 1956(Part 1):1976

Glossary of terms relating to iron and steel Part I General Dec 2007 metallurgy, heat treatment and testing (first revision)

2

IS 3848:1981

Method for end quench test for hardenability of steel (first revision)

Apr 2009

3

IS 4075:1985

Method for macrostreak flaw test for steel (first revision)

Dec 2007

4

IS 4163:2004 / ISO 4967:1998

5

IS 4748:2009

Method for estimating average grain size of metals (first revision) (Superseding IS 2853)

6

IS 5699:1970

Method for chill testing of cast iron

Apr 2009

7

IS 6396:2000

Method of measuring decarburized depth of steel (second revision)

Jan 2007

8

IS 6416:1988

Method of measuring case depth of steel (first revision)

Dec 2007

9

IS 7739(Part 1):1975

Code of practice for preparation of metallurgical specimens Part 1 General features

Jun 2010

10

IS 7739(Part 2):1975

Electrolytic polishing

Dec 2007

11

IS 7739(Part 3):1975

Aluminium and its alloys and their examination

Dec 2007

12

IS 7739(Part 4):1975

Copper and its alloys and their examination

Dec 2007

13

IS 7739(Part 5):1976

Iron and steel and their examination

Dec 2007

14

IS 7739(Part 6):1975

Lead and its alloys and their examination

Dec 2007

15

IS 7739(Part 7):1975

Magnesium and its alloys and their examination

Dec 2007

16

IS 7739(Part 8):1975

Nickel and its alloys and their examination

Dec 2007

17

IS 7739(Part 9):1975

Gold, silver, platinum, palladium and their alloys

Dec 2007


Steel - Determination of content of nonmetallic inclusions Jun 2010 - Micrographic method using standard diagrams (third revision)


71

No. of Amd.

18

IS 7739(Part 10):1975

Tin and its alloys and their examination

Dec 2007

19

IS 7739(Part 11):1976

Zinc and its alloys and their examination

Dec 2007

20

IS 7754:1975

Method for designation of microstructure of graphite in cast iron

Dec 2007

21

IS 8795:1978

Method for determining case depth of carburized steel by Dec 2007 fracture test

22

IS 8860:1978

Code of practice for heat treatment of aluminium alloys

23

IS 9415:1980

Method for determination of hardenability and grain size Jan 2007 of tool steels by penetration fracture test

24

IS 10138:2010

Macroscopic method for assessing the content of non metallic inclusion in wrought steel (second revision) (Amalgamating IS 10138(Pt 1):1992, IS 10138(Pt 2):1983 and IS 10138(Pt 3):1983

25

IS 11371:1985

Method for macroetch test for wrought steel products

Dec 2007

26

IS 12037:1987

Macrographic examination by sulphur print (Baumann method)

Jan 2007

27

IS 12211:1987

Micrographic method for assessing the distribution of carbides in tool steel and bearing steels using photomicrographs

Jan 2007

28

IS 12366:1988

Recommended practice for heat treatment for titanium and titanium alloys

Jan 2007

29

IS 12378:1988

Method of macroetch test for titanium alloys

Jan 2007

30

IS 12573:2010

Macroetch test for wrought aluminium alloy products

31

IS 13015:1991

Macroetch testing, inspection and rating of steel products Dec 2007

32

IS 13417:1992

Code of practice for heat treatment of steels

Dec 2007

33

IS 13484:1992

Macroetch test for copper alloys

Dec 2007

34

IS 13605:1992

Method for macroetch test for zinc and zinc alloys

Dec 2007

35

IS 13655:1993

Code of practice for heat treatment of steels cast iron

Jan 2007

36

IS 13691:1993 / ISO 4970:1979

Determination of total or effective thicknesses of thin surfaces hardened layers

Jan 2007

37

IS 14598:1998

Heat treatment of maraging steel - Code of practice

Dec 2007



72

Dec 2007

38

IS 15426:2004 / ISO 14250:2000

Steel - Metallographic characterization of duplex grain size and distributions

39

IS 15839:2009 / 13520:2002

Determination of ferrite content in Austenitic stainless steel castings





73

Jun 2010

MTD 24 CORROSION PROTECTION AND FINISHES SECTIONAL COMMITTEE SCOPE - Standardization in the field of corrosion, passivation and protection of metals, metal products in different applications, characteristics of protective and decorative metalic coatings, anodic oxide coatings, applied by electrolysis, hot dipping, thermal spraying, chemical means their testing and inspection methods LIAISON MTD 20 ISO/TC 156 Corrosion of metals and alloys ISO/TC 107 Metallic and other non-organic coatings Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 1067:1981

Electroplated coatings of silver for decorative and protective purposes (secondrevision)

2

IS 1068:1993

Eletroplated coatings of nickle plus chromium and copper Mar 2011 plus nickel plus chromium (third revision)

3

IS 1327:1988

Methods of determination of mass of tin coatings of tinplate (third revision)

4

IS 1337:1993

Electroplated coatings of hard chromium for engineering Mar 2011 purposes (third revision)

5

IS 1340:1977

Code of practice for chromate conversion coating on zinc and cadmium coated articles and zinc base alloys(first revision)

Mar 2011

6

IS 1359:1992

Electroplated coatings of tin(third revision)

Mar 2011

7

IS 1378:1987

Oxidized-copper finishes (third revision)

Mar 2011

8

IS 1572:1986

Electroplated coatings of cadmium on iron and steel(second revision)

Mar 2011

9

IS 1573:1986

Electroplated coatings of zinc on iron and steel(second revision)

Mar 2011

10

IS 1771:1986

Electroplated coatings of silver and silver alloys for general engineering purposes (second revision)

Mar 2011

11

IS 1772:1973

Eletroplated coatings of copper(first revision)

Mar 2011

12

IS 1773:1982

Electroplated coatings of brass

Mar 2011

13

IS 1868:1996

Anodic coatings on aluminium and its alloys (third revision)

Mar 2011

14

IS 1958:1989

Nickel anodes for electroplating (second revision)

Mar 2011

15

IS 1959:1994

Silver anodes for electroplating (second revision)

Mar 2011



74

Mar 2011 1

Mar 2011 1

1

1

16

IS 1985(Part 1):1980

Recommended practice for preparation of iron and steel Mar 2011 for electroplating Part 1 high carbon steel (first revision)

17

IS 1985(Part 2):1980

Part 2 Low carbon steel (first revision)

Mar 2011

18

IS 1985(Part 3):1980

Part 3 Iron castings (first revision)

Mar 2011

19

IS 1986:1981

Code of practice for hard chromium plating on iron and steel for general engineering purposes (first revision)

Mar 2011

20

IS 1992:1979

Electroplated coatings of lead(first revision)

Mar 2011

21

IS 2384:1963

Tin anodes for electroplating

Mar 2011

22

IS 2450:1963

Recommended practice for plating on aluminium and its Mar 2011 alloys

23

IS 2601:1987

Brass anodes for electroplating (first revision)

Mar 2011

24

IS 2602:1989

Cadmium anodes for electroplating (first revision)

Mar 2011

25

IS 2603:1983

Copper anodes for electroplating (first revision)

Mar 2011

26

IS 2604:1988

Lead anodes for electroplating (second revision)

Mar 2011

27

IS 2605:1985

Zinc anodes for electroplating (first revision)

Mar 2011

28

IS 2606:1987

Alloy lead anodes for chromium plating (second revision) Mar 2011

29

IS 2629:1985

Recommended practice for hot-dip galvanizing on iron and steel (first revision)

Mar 2011

30

IS 2633:1986

Methods for testing uniformity of coating of zinc coated articles (second revision)

Mar 2011

31

IS 2679:1964

Recommendations for equipment for electroplating

Mar 2011

32

IS 3194:1980

Recommended practice for cleaning of metals prior to electroplating (first revision)

Mar 2011

33

IS 3203:1982

Methods of testing local thickness of electroplated coatings_(first revision)

Mar 2011

34

IS 3266:1982

Electroplated coatings of gold for general engineering purposes (first revision)

Mar 2011

35

IS 3531:1997

Glossary of terms relating to corrosion of metals (second Jun 2007 revision)

36

IS 3554:1966

Glossary of terms relating to electroplating



75

Mar 2011

1

3

1

37

IS 3618:1966

Phosphate treatment of iron and steel for protection against corrosion

Jun 2007

38

IS 3655:1985

Recommended practice for electroplating (first revision)

Mar 2011

39

IS 3656:1968

Code of recommended practice for mechanical polishing Mar 2011 of metals for electroplating

40

IS 3821:1973

Methods for determination of weight of coating on hot-dip Mar 2011 aluminized iron and steel articles

41

IS 4180:1967

Code of practice for corrosion protection of light gauge steel sections used inbuilding

Jun 2007

42

IS 4252:1982

Electroplated coatings of gold for decorative purposes (first revision)

Mar 2011

43

IS 4736:1986

Hot-dip zinc coatings on mild steel tubes (first revision)

Mar 2011

4

44

IS 4759:1996

Hot-dip zinc coatings on structural steel and other allied Mar 2011 products (third revision)

1

45

IS 4777:1968

Performance tests for protection schemes used in protection of light gauge steel against corrosion

Jun 2007

46

IS 4826:1979

Hot-dipped galvanized coatings on round steel wires(first revision)

Mar 2011

47

IS 5523:1983

Method of testing anodic coating on aluminium and its alloys (first revision)

Mar 2011

48

IS 5528:1985

Method of testing corrosion resistance of electroplated and anodized aluminium coating by copper accelerated acetic acid salt spray (CASS) test (first revision)

Mar 2011

49

IS 5555:1970

Code of procedure for conducting field studies on atmospheric corrosion of metals

Jun 2007

50

IS 5905:1989

Sprayed aluminium and zinc coatings on iron and steel (first revision)

Mar 2011

51

IS 5925:1978

Recommended practice for silver plating for general engineering purposes

Mar 2011

52

IS 6005:1998

Code of practice for phosphating of iron and steel

Jun 2007

53

IS 6009:1970

Method for evaluation of results of accelerated corrosion Mar 2011 test

54

IS 6012:1992

Method for measurement of coating thickness by eddy current (first revision)

55

IS 6057:1988

Hard anodic coatings on aluminium and aluminium alloys Mar 2011 (first revision)

56

IS 6158:1984

Recommended practice for safeguarding against embrittlement of hot-dipped galvanized iron and steel products (second revision)



76

1

3

1

Mar 2011

Mar 2011

1

57

IS 6159:1998

Recommended practice for design and fabrication of material prior to galvanizing (first revision)

58

IS 6586:1989

Recommended practice for metal spraying for protection Mar 2011 of iron steel (first revision)

59

IS 6651:1972

Anodized aluminium for automobile use

60

IS 6697:1988

Hot-dip aluminium coatings on ferrous parts (other than Mar 2011 sheet,strip and wire) for general purposes (first revision)

61

IS 6745:1972

Method for determination of mass of zinc coating on zinc Mar 2011 coated iron and steel articles

5

62

IS 6910:1985

Method of testing corrosion resistance of electroplated and anodized aluminium coatings by acetic acid salt spray (AAS) test (first revision)

1

63

IS 7088:1973

Recommended practice for anodizing of aluminium and itsMar 2011 alloys

64

IS 7808:1975

Code of procedure for conducting studies on underground corrosion of metals

Jun 2007

65

IS 8038:1985

Method of testing corrosion resistance of metallic and other non organic coatings by corrodkote test (first revision)

Mar 2011

66

IS 8062:2006

Cathodic protection of burried pipeline/structure for transportation of Natural Gas Oil and liquids - Code of practice (first revision)

67

IS 8062(Part 2):1976

Code of practice for cathodic protection of steel structures, Part 2 Underground pipelines

Jun 2007

68

IS 8062(Part 3):1977

Code of practice for cathodic protection of steel structure,part 3 Ship's hull

Jun 2007

69

IS 8062(Part 4):1979

Code of practice for cathodic protection of steel structures ,part 4 Galvanic protection of dockgates, caissons, piers and jetties

Jun 2007

70

IS 8221:1976

Code of practice for corrosion prevention of metals and metal components in packages

Jun 2007

71

IS 8375:1977

Method for checking continuity of anodized coatings

Mar 2011

72

IS 8376:1988

Electroplated coatings of nickel plus chromium on plasticsMar 2011 for decorative purposes (first revision)

73

IS 8435:1977

Methods for measurement of thickness of metallic coatings on plastics

Mar 2011

74

IS 8436:1989

Methods for thermal cycling test for evaluation of electroplated plastics (first revision)

Mar 2011

75

IS 8508:1988

Code of practice for hot-dip aluminizing of iron and steel Mar 2011 (first revision)

76

IS 8554:1977

Method of checking insulation of anodized coating by measurement of break down potential



77

Mar 2011

Mar 2011

Mar 2011

1

Mar 2011

77

IS 8602:1977

Method of tests for chromate coatings on zinc and cadimium surfaces

Mar 2011

78

IS 8629(Part 1):1977

Code of practice for protection of iron and steel structures from atmospheric corrosion, part 1 General principles of corrosion and its prevention

Mar 2011

1

79

IS 8629(Part 2):1977

Code of practice for protection of iron and steel structures from atmospheric corrosion Part 2 Pretreatment

Mar 2011

1

80

IS 8629(Part 3):1977

Code of practice for protection of iron and steel structures from atmospheric corrosion Part 3 Protection schemes

Mar 2011

1

81

IS 9077:1979

Code of practice for corrosion protection of steel reinforcement in RB and RCC construction

Jun 2007

82

IS 9172:1979

Recommended design practice for corrosion prevention Mar 2011 of steel structures

83

IS 9530:1980

Method of testing microhardness of electroplated coatingsMar 2011

84

IS 9531:1989

Recommended practice for preparation of copper and copper-base alloys for electroplating (first revision)

85

IS 9838:1981

Method for determinattion of coating mass per unit area Mar 2011 of conversion coatings on metallic materials by gravimetric method

86

IS 9839:1981

Chromate conversion coatings on electroplated zinc and Mar 2011 cadmium coatings

87

IS 9844:1981

Method of testing corrosion resistance of electroplated and anodized aluminium coatings by neutral salt spray test

88

IS 10117:2000

Code of practice for passivation of stainless steel Mar 2011 articles, industrial equipments and components including pipe line (first revision)

89

IS 10173:1982

Recommended practice for preparation of zinc alloy die castings for electroplating

Mar 2011

90

IS 10209:1982

Electroplated coatings of tin-lead alloy (solder)

Mar 2011

91

IS 10221:2008

Code of practice for coating and wrapping of underground mild steel pipelines (first revision)

92

IS 10461(Part 1):1994

Method for determination of resistance to intergranular corrosion of austeniticstainless steel Part 1 Corrosion tests in nitric acid medium by measurement of loss in mass (Huoy test) (first revision)

Mar 2011

93

IS 10461(Part 2):1994

Method for determination of resistance to intergranular corrosion of austeniticstainless steels, Part 2 copper sulphate / sulphuric acid test(Monypenny straustest)

Jun 2007

94

IS 10471:1983

Recommended practice for corrosion prevention in electronic component and assemblies

Jun 2007

95

IS 10493:1983

Corrosion protection tests for temporary corrosion preventives

Jun 2007



78

Mar 2011

Mar 2011

96

IS 11232:1985

Chromate conversion coatings on aluminium

97

IS 11268:1985

Method for estimation of loss of absorptive power of Mar 2011 anodic oxide coatings after sealing dye spot test with prior acid treatment for anodized aluminium and itsalloys

98

IS 11579:1986

Recommended practice for chromate conversion coatings on aluminium

Jun 2007

99

IS 11598(Part 1):1986

Code of practice for corrosion protection in fertilizer plants Part 1 Phosphoric acid plant

Jun 2007

100

IS 11759:1986

Recommended practice for repair of damaged hot-dip galvanized coatings

Mar 2011

101

IS 11812:1986

Recommended practice for safeguarding against Mar 2011 warpage and distortion of hot-dipped galvanized articles

102

IS 11826:1986

Recommended practice for chemical colouring for engineering components in general and for bicycle components

Mar 2011

103

IS 11857:1986

Anodized wrought aluminium for external ar chitectural applications

Mar 2011

104

IS 11864:1986

Recommended construction practice of apparatus for spray cabinet for various salt spray tests

Mar 2011

105

IS 12393:1988

Electroplated coatings of nickel

Mar 2011

106

IS 12560:1988

Code of practice for cathodic protection of heat exchangers and condensers

Mar 2011

107

IS 12594:1988

Hot-dip zinc coating on structural steel bars for concrete Mar 2011 reinforcement

108

IS 12643:1989

Corrosion protection of steel by fiberglass reinforced polyester lining code ofpractice

Mar 2011

109

IS 12753:1989

Electrogalvanized coatings on round steel wire

Mar 2011

110

IS 13147:1990

Blackoxide coatings on stainless steel parts

Mar 2011

111

IS 13177:1991

Passivation of stainless steel parts

Mar 2011

112

IS 13212:1991

Blackoxide coatings for iron and steel parts

Mar 2011

113

IS 13515:1992

Rust converter

Jun 2007

114

IS 13647:1993

Electroplated coatings of rhodium for engineering purposes

Mar 2011

115

IS 13677:1993

Electronless nickel - phosphorus coatings

Mar 2011



79

Jun 2007

116

IS 14126:1994 / ISO 2177:1985

Metallic coatings - measurement of thickness coulometric method

117

IS 14149:2008 / ISO 3543:1981

Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (first revision)

118

IS 14191:1996

Corrosion of Metals and alloys - classification of corrosivity of atmosphere

119

IS 14297:1995

Corrosion of metals and alloys - Corrositivity of Mar 2011 atmospheres-Determination ofcorrosion rate of standard specimens for the evaluation of corrosivity

120

IS 14321:1995

Corrosion of metals and alloys - Recommended values for the corrosivity categories of atmosphlures

Mar 2011

121

IS 14322:1996

Corrosion of Metals and Alloys - Corrosivity of atmosphere - Measurement of pollution - Methods

Mar 2011

122

IS 14503:1998

Testing of phosphate coatings - Methods

Mar 2011

123

IS 15337:2003

Coal tar based anticorrosion tape for protection of under Oct 2008 ground mild steel pipelines

124

IS 15659(Part 1):2006

Petroleum and natural gas industries - External coatings Mar 2011 for burried or submerged pipelines uses in pipeline transporation of gas and liquid hydrocarbons

125

IS 15659(Part 2):2006

Petroleum and natural gas industries - External coatings Mar 2011 for burried or submerged pipelines used in pipeline transporation of gas and liquid hydrocarbons


DOC.MTD 24(5051)


Single Pack Zinc Rich Coating


80

Mar 2011

Mar 2011

1

MTD 25 POWDER METALLURGICAL MATERIALS AND PRODUCTS SECTIONAL COMMITTEE

SCOPE - Standardization in the field of powder metallurgical materials and products LIAISON ISO/TC 119 Powder metallurgy Sl. No. IS Number/ DOC Number

Title



DOC.MTD 25(4818)

Titanium carbide powder for hard metals (revision of IS 8269)

2

IS 4840:2006 / ISO 4490:2001

3

IS 4841:1982

Method for determination of density of sintered metallic materials (first revision)

Feb 2009

4

IS 4842:1982

Method for transverse testing of hardmetals (first revision)

Feb 2009

5

IS 4848:1981

Method for determination of apparent density of free flowing powders for powder metallurgical purposes (first revision)

Feb 2009

6

IS 4857:2005 / ISO 3927 : 2001

Metallic powders,excluding powders for hardmetals Determination of compressibility in uniaxial compression(fourth revision)

7

* IS 5432:1982

Glossary of terms relating to powder metallurgy (first revision)

Feb 2009

8

IS 5461:1984

Method for sieve analysis of metal powders (first revision)

Feb 2009

9

* IS 5642:1991 / ISO 2738 : 1987

Permeable sintered metal materials - Determination of density,oil content,and open porosity (second revision)

Feb 2009

10

IS 5644(Part 1):1993 / ISO 4491-1:1997

Metallic powders - Determination of oxygen content by reduction methods Part 1 General guidelines (third revision)

Feb 2009

11

IS 5644(Part 2):2005 / ISO 4491-2:1997

Part 2 Loss of mass on hydrogen reduction (hydrogen loss) (fourth revision)

12

IS 5644(Part 3):2005 / ISO 4491-3:1997 IS 5644(Part 4):1993 / ISO 4491-4:1989 IS 5652(Part 1):1993 / ISO 3738-1:1982

Part 3 Hydrogen - Reducible oxygen (fourth revision)

13 14

Metallic powder - Determination of flow time by means of a calibrated funnel (Hall flow meter) (second revision)

Part 4 Total oxygen by reduction extraction (third revision)Feb 2009 Hardmetals - Rockwell hardness test (scale A) Part 1 Test method (second revision)

Feb 2009 Feb 2009

15

IS 6492:1972

Methods for sampling of powders for powder metallurgical purposes

16

IS 7438:1985

Method for test for acid-insoluble content in iron, copper, Feb 2009 tin, and bronze powders (first revision)



81

17

IS 7505:1985

Cobalt powder for hardmetals (first revision)

Feb 2009

18

IS 7506:1987

Nickel powder (first revision)

Feb 2009

19

IS 7512:2006

Method for the determination of average particle size of metal powders by Fisher subsieve sizer

20

IS 7970:1987

Tantalum powder for capacitors (first revision)

Feb 2009

1

21

IS 8367:1993

Tin powder (first revision)

Feb 2009

1

22

* IS 8368:1985

Tungsten carbide powder for hardmetals (first revision)

Feb 2009

23

IS 8369:2010

Titanium carbide powder for hardmetals (second revision)

24

* IS 8370:1977

Iron powder for powder metallurgical aplications

Feb 2009

25

IS 8392:1985

Tungsten powder for hardmetals (first revision)

Feb 2009

26

* IS 8485:1977

Copper powder for powder metallurgical applications

Feb 2009

27

IS 8871:2004 / ISO 3953:1993

28

IS 8876:1978

Method for the determination of residue on chlorination of Feb 2009 tungsten metal powder

29

IS 10035:1993

Bronze powder for metallic filters (first revision)

Feb 2009

30

IS 10385:1982

Method for determination of radial crushing strength of sintered metal powder bearings

Feb 2009

31

IS 11110:1984

Copper lead powder

Feb 2009

32

IS 11111:1984

Leaded bronze powders

Feb 2009

33

IS 11506:2004 / ISO 13944:1996

34

IS 11518:1985

Determination of (the magnetization) coercivity in hardmetals

Feb 2009

35

IS 11520:1985

Method for metallographic sample preparation of hardmetals

Feb 2009

36

IS 11627:1986

Method for determination of apparent density of metallic Feb 2009 powders by Scott volumeter

37

IS 11959:1987

Method for metallographic determination of microstructure in hardmetals


Metallic Powders - Determination of tap density (second revision)

Method for determination of lubricant content of lubricated metallic powder by Soxhlet extraction (first revision)


82

Feb 2009

1

38

IS 11960:1987

39

IS 12279:2005 / ISO 3325:1996

40

IS 12286:1988

Method for determination of abrasive wear resistance of Feb 2009 hardmetals

41

IS 12473(Part 1):1988

Chemical analysis of hardmetals by flame atomic absorption spectormetry Part I General requirements

42

IS 12473(Part 2):1988

Part 2 Determination of calcium, potassium, magnesium Feb 2009 and sodium in contents from 0.001 to 0.02 percent (m/m)

43

IS 12473(Part 3):1988

Part 3 Determination of cobalt,iron ,manganese and nickelFeb 2009 in contents from 0.01to 0.5 percent (m/m)

44

IS 12473(Part 4):1988

Part 4 Determination of molybdenum,titanium and vanadium in contents from 0.01 to 0.5 percent (m/m)

45

IS 12473(Part 5):1988

Part 5 Determination of cobalt, iron, manganese, Feb 2009 molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 percent (m/m)

46

IS 12473(Part 6):1988

Part 6 Determination of chromium in contents from 0.01 toFeb 2009 2 percent (m/m)

47

IS 12483:1988

Determination of titanium in hardmetals by spectrophotometric method

Feb 2009

48

IS 12513:1988

Determination of cobalt in hardmetals by potentiometric method

Feb 2009

49

IS 12539:1988

Determination of total carbon in hardmetals by gravimetricFeb 2009 method

50

IS 12548:1988

Determination of insoluble (free) carbon in hardmetals by Feb 2009 gravimetric method

51

IS 12570:1988

Method for determination of dimensional changes associated with compacting and sintering of metallic powders (excluding powders for hardmetals)

Feb 2009

52

IS 12571:1988

Method for determination of green strength by transverse rupture of rectangularcompacts of metallic powder

Feb 2009

53

IS 12783:1989

Hardmetals - Vickers hardness test

Feb 2009

54

IS 13780:1993 / ISO 4506:1979 IS 13781:1993 / ISO 4003:1977

Hardmetals - Compression test

Feb 2009

Permeable sintered metal materials - Determination of bubble test pore size

Feb 2009

56

IS 13782:1993 / ISO 4022:1987

Permeable sintered metal materials - Determination of fluid permeability

Feb 2009

57

IS 13803:1993 / ISO 3312:1987

Sintered metal materials and hardmetals - Determination Feb 2009 of young modulus

55


Methods for metallographic determination of apparent porosity and uncombined carbon in hardmetals

Feb 2009

Sintered metal materials (excluding hardmetals) Determination of transverse rupture strength (first revision)


83

Feb 2009

Feb 2009

58

IS 15554:2004 / ISO 2740:1999

Sintered metal material, excluding hard metal - Tensile test piece

59

IS 15567:2005 / ISO 3928:1999

Sintered metal material, excluding hard metal - Fatigue test piece

60

IS 15574:2005 / ISO 5754:1978

Sintered metal materials excluding hardmetals Unnotched impact test piece

61

IS 15585:2005 / ISO 5755:2001 IS 15703:2006 / 4498:2005

Sintered metal material - Specificaiton

62

Sintered metal material, excluding hard metals Determination of apparent hardness and microhardness


DOC.MTD 25(4828)

Sintered ferrous materials, carburized or carbnitrited Determination and verification of case hardening depth by a micro-hardness test (adoption to ISO 4507:2000)


DOC.MTD 25(4924)

Sintered metal materials, excluding hardmetals - Tensile led piece (Revision of IS 15554:2004/ISO 2740:1999 by adoption of ISO 2740:2007)


DOC.MTD 25(4817)

*STANDARDS UNDER REVISION / INDICATES DUAL NUMBER STANDARDS

Tungsten carbide powder for hard metals (second revision of IS 8368)


84

MTD 26 INDUSTRIAL FUEL-FIRED FURNACES SECTIONAL COMMITTEE SCOPE - Standardization in the field of industrial fuel fired furnaces Sl. No. IS Number/ DOC Number

Title



IS 8849:1991

Glossary of terms relating to fuel fired industrial furnaces Mar 2004

2

IS 9180:1991

Recommendatins for performance rating of fuel-fired furnaces (first revision)

3

IS 9444:2007

Code of practice for installation of oil supply units for fuel fired furnaces (first revision)

4

IS 9977:1998

Design and construction of box type forging furnaces Guidelines (first revision)

5

IS 10298:1982

Guidelines for design and construction of mould and core Aug 2006 drying ovens for foundries

6

IS 11462:1985

Mould and core sand dryers rotary type

Aug 2006

7

IS 12368:1988

Guidelines for design and construction of hot air generators

Aug 2006

8

IS 12392:1988

Code of practice for design manufacture and testing of metallic recuperators

Aug 2006

9

IS 12553:1988

Code of practice for design,construction,installation and Aug 2006 operation of industrial gas/oil burning equipment

10

IS 12826(Part 1):1989

Code of practice for ordering, testing and acceptance of Aug 2006 industrial furnaces Part 1 purchaser's data sheet for ordering of industrial furnaces

11

IS 12826(Part 2):1990

Part 2 Supplier's data sheet for ordering of industrial furnaces

Mar 2004

12

IS 12826(Part 3):1990

Part 3 Testing and aceptancce of industrial furnaces

Mar 2004

13

IS 14245:1995

Protective atmosphere for heat treatment furnaces Recommendations

Mar 2004

14

IS 14492:1997

Drying preheating and commissioning of furnace Mar 2004 installations, steam boilers, industrial kilns and chimneys Recommendations

15

IS 15562:2005

Design and construction of bogie hearth type heat treatment furnaces - Guidelines

Aug 2006

Mar 2004


DOC.MTD 26(4729)

Recommendations for performance rating of fuel - Fired Furnances (second revision of IS 9180)


DOC.MTD 26(5011)


Guidelines for design and construction of continous pusher type oil (gas top fired reheating furnaces) ** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS

85

2001

MTD 30 SPONGE IRON AND SMELTING REDUCTION SECTIONAL COMMITTEE SCOPE - Standards in the field of sponge iron/direct reduced iron (DRI) and feedstock for smelting reduction LIAISON PCD 7 Solid mineral fuel sectional committee ISO/TC 102 Sl. No. IS Number/ DOC Number

Title



IS 10852:1984

Guidelines for storage and transportation of sponge iron/direct reduced iron(DRI)

Mar 2011

2

IS 11092:2001

Iron ore pellets for direct reduction processes (second revision)

Mar 2011

3

IS 11093:2001

Iron ore lumps for direct reduction processes (second revision)

Mar 2011

4

IS 11284:1985

Method of rotary tube test for iron bearing materials for Mar 2011 the manufacture of sponge iron/direct reduced iron(DRI )

5

IS 11285:2001

Various tests on raw materials to be used for coal based Mar 2011 direct rotary kiln direct reduction (first revision)

6

IS 11795:1996

Guidelines for ash softening softening studies on solid reductants Mar 2007 for direct reduction (first revision)

1

7

IS 11860:1998

Guidelines for non -coking coals for solid reductant based direct reduction in rotary kilns(and other reactors (first revision)

2

8

IS 12052:2007

Method for determination of re-oxidation rate of sponge iron/direct reduced iron(DRI) in contact with humid air and in direct contact with water (first revision)

9

IS 12263:1987

Method for determination of rigidity of sponge iron/DRI during transportation and handling

Oct 2008

10

IS 12381:1994

Methods of determination of coal (char) reactivity for direct reduction processes (first revision)

Mar 2007

1

11

IS 12668:1989

Melting characterstics of sponge iron/direct reduced iron Mar 2011 (DRI)

1

12

IS 12929:2007

Feedstock (iron oxides and natural gas) for gas based direct reduction processes- guidelines (first revision) (superseding IS 14373, 14405)

13

* IS 13885:2001

Non-Magnetics/char in sponge iron (DRI)-Methods of determination (first revision)

Mar 2007

1

14

IS 14719:1999

Density of hot briquetted iron (HBI) - Method for determination

Mar 2011

1

15

IS 14795:2000

Method for determination of clustering of feedstock for DR process

Mar 2011

1

16

IS 14796:2000

Feedstock for smelting reduction process - guidelines

Mar 2011

1



86

Oct 2008

1

17

IS 14797:2000

Classification of smelting reduction process

Mar 2011

18

IS 14991:2001

Method of determination of coal char strengths

Mar 2007

19

IS 15774:2007

Sponge Iron/Direct Reduction Iron (DRI) hot briquettes iron (HBI) and cold briquettes for steel making (amelgmating IS 10812, IS 13839 and IS 13905)


DOC.MTD 30(4949)

Guideline for storage and transporation transporation of sponge iron, direct reduced iron (DRI) and hot briquetted iron (HBI) (first revision of IS 10852)


DOC.MTD 30(4947)

Magnetics in char from coal based sponge iron (DRI) Methods of determination

2

DOC.MTD 30(5056)

Direct reduced iron - Determination of metallic iron Bromine-methanol titrimetric method (based on ISO 5416:2006)

3

DOC.MTD 30(5057)

Direct reduced iron and hot briquetted iron - Sampling and sampling preparation (based on ISO 10835:2007)

4

DOC.MTD 30(5058)

Direct reduced iron - Determination of tumble strength of hot briquetted iron (HBI) (based on ISO 15967:2000)

5

DOC.MTD 30(5059)

Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron i ron (HBI) (based on ISO 15968:2000)

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1

DOC.MTD 30(5066)


Sponge iron/direct reduced iron (DRI) , hot briquetted iron i ron (HBI)/ cold briquetted iron (CBI) for steel making in induction furnaces




87

1

2

MTD 32 METAL CONTAINERS SECTIONAL COMMITTEE SCOPE - Standardization in the field of metal containers LIAISON ISO/TC 52 Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 916:2000

18 litre square tins (fourth revision)

Mar 2011

2

** IS 1394:1984

Glossary of terms relating to metal containers (third revision)

Mar 2011

3

IS 1406:1995

Rectangular tins for liquids (fourth revision)

Mar 2011

4

IS 1407:1980

Round paint tins (second revision)

Mar 2011

1

5

** IS 1783(Part 1):1993

Drums,large,fixed ends, Part 1 Grade A drums (third revision)

Mar 2011

2

6

** IS 1783(Part 2):1988

Drums, large, fixed ends, Part 2 Grade B drums (third revision)

Mar 2011

1

Screwed closures for drums (third revision)

Mar 2011

Crown closures (second revision)

Mar 2011

7

IS 1784:1998

8

** IS 1994:1987

9

IS 2034:1987

Round open top sanitary cans for butter and cheese (first revision)

Mar 2011

10

IS 2087:1988

Square tins for general purpose (third revision)

Mar 2011

11

IS 2123:1977

Vial (goldie) seals (first revision)

Feb 2003

12

IS 2134:1981

Round tins for general purposes (second revision)

Mar 2011

13

IS 2471:1963

Methods of test for metal containers

Mar 2011

14

IS 2474:1982

Metal closures for drums (first revision)

Mar 2011

3

15

IS 2552:1989

Steel drums (galvanized and ungalvanized) (third revision)

Sep 2006

1

16

IS 3101:1995

Aluminium collapsible tubes (second revision)

Sep 2006

17

IS 3259:1966

Methods of sampling of metal containers

Mar 2011



88

1

18

IS 3286:1980

Round grease tins (first revision)

Mar 2011

19

IS 3575:1993

Bitumen drums (third revision)

Mar 2011

20

IS 3603:1988

Seamless aluminium bottles (first revision)

Mar 2011

21

IS 3680:1987

Round printing ink containers (first revision)

Mar 2011

22

IS 4638:1981

Seamless rectangular fish tins (first revision)

Mar 2011

23

IS 5241:1987

Shoe polish containers (first revision)

Mar 2011

24

IS 5682:1991

Open top drums and kegs (first revision)

Mar 2011

25

IS 6941:1973

Method for sampling metal closures

Sep 2006

26

IS 7182:1973

Methods of tests for aluminium collapsible tubes

Sep 2006

27

IS 7852:1975

Eye ointment tubes, small

Sep 2006

28

IS 8393:1977

Roll seal pilferproof closures

Sep 2006

29

* IS 8449:1999

Non-returnable metal aerosol dispensers

Mar 2011

30

IS 8469:1977

Methods of tests for flammability of aerosol products

Sep 2006

31

IS 8932:1978

Preformed metal screw caps for glass containers

Sep 2006

32

IS 8933:1978

Mess tins

Mar 2011

33

IS 8996:1988

20 litre steel jerry cans (first revision)

Mar 2011

34

IS 9209:1979

Methods of test for the compatibility of aerosol products Mar 2011 with the metal aerosol dispensers

35

IS 9396(Part 1):1987

Round open top sanitary cans for processed foods, Part Mar 2011 I Tinplate requirements(first revision)

36

IS 9396(Part 2):1987

Round open top sanitary cans for foods and drinks, Part Mar 2011 2 Sizes and general requirements (first revision)

37

IS 9445:1980

Aluminium containers for packing of liquid pesticides (capacity 5 litres and above)

Mar 2011

1

38

IS 9503:1988

Aluminium bottles for packing of liquid pesticides (first revision)

Mar 2011

1



89

2

1

1

39

IS 9634:1980

Aerosol valves - 25.4 mm diameter

Mar 2011

40

IS 9635:1980

Methods for sampling of aerosol valves

Mar 2011

41

IS 9976:1981

Method of sampling of open top sanitary (OTS) cans

Mar 2011

42

IS 9991:1981

Condensed milk cans

Mar 2011

43

IS 9992:1991

Round and rectangular tinplate cans for liquid pesticides Mar 2011 (first revision)

44

IS 10325:2000

Square tins-15 kg for ghee,vanaspati, edible oils and bakery shortenings (second revision)

Mar 2011

45

IS 10339:2000

Ghee, vanaspati ane edible oil tins (second revision)

Mar 2011

46

IS 11078:1993

Open top sanitary cans for milk powder (first revision)

Mar 2011

47

IS 11079:1984

Metal cans for pan masala and zarda

Sep 2006

48

** IS 11104:1984

Glossary of terms relating to open top sanitary cans

Sep 2006

49

IS 12219:1987

Methods of determination of gross-lidded capacity of open top sanitary cans

Mar 2011

50

IS 12340:1988

Round open top aluminium containers for liquid pesticidesMar 2011

1

51

IS 13997:1994

Drums large open top

Mar 2011

1

52

IS 14407:1996

Aluminium cans for bevereges

Mar 2011


DOC.MTD 32(4912)

Glossary of terms relating to open top sanitary cans (first revision)

2

DOC.MTD 32(4943)

Specification for Round open top sanitary cans for butter and cheese (first revision)

3

DOC.MTD 32(4944)

Specification for round open top sanitary cans for food and drinks Part 2 Sizes and general requirements (second revision)

4

DOC.MTD 32(4945)

Round open top sanitary cans for milk powder specification (second revision)


DOC.MTD 32(4996)


Round open top sanitary cans for processed foods Part 1 Tinplate requriements (second revision of IS 9396)


90

1

1

MTD 33 NAOTECHNOLOGIES SECTIONAL COMMITTEE

SCOPE - Standardization in the field of nanotechnologies LIAISON ISO/TC 229 Nanotechnologies Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

STANDARDS PUBLISHED



91

No. of Amd.

MTD 34 METHODS OF CHEMICAL ANALYSIS OF METALS SECTIONAL COMMITTEE

SCOPE - Standardization in the field of chemical/ instrumental analysis of ferrous, nonferrous metals, ores and raw materials LIAISON ISO/TC 26 Copper and Copper alloys ISO/TC 17 Steel Castings ISO/TC 18 Zinc and Zinc Alloys ISO/TC 79 Light Metals and Their Alloys ISO/TC 132 Ferroalloys ISO/TC 65 Manganese and Chromium ores ISO/TC 102 Iron Ores ISO/TC 129 Aluminium Ores and Minerals Sl. No. IS Number/ DOC Number

Title

Reaffirm Date

No. of Amd.


IS 228(Part 1):1987

Methods of chemical analysis of steels (part 1) Determination of carbon by volumetric method (for carbon 0.05 to 2.50 percent) (third revision)

Feb 2008

2

IS 228(Part 2):1987

Part 2 Determination of Manganese in plain carbon and low alloy steels by arsenite method (third revision)

Feb 2008

3

IS 228(Part 3):1987

Part 3 Determination of phosphorus by alkalimetric method (third revision)

Feb 2008

4

IS 228(Part 4):1987

Part 4 Determination of total carbon by gravimetric method (for carbon greaterthan or equal to 0.1 percent) (third revision)

Feb 2008

5

IS 228(Part 5):1987

Part 5 Determination of nickel by dimethyl glyoxime (gravimetric) method (for nickel greater than or equal to 0.1 percent (third revision)

May 2009

6

IS 228(Part 6):1987

Part 6 Determination of chromium by persulphate May 2009 oxidation method (for chromium greater than or equal to 0.1 percent) (third revision)

7

IS 228(Part 7):1990

Part 7 Determination of molybdenum by alphabenzoinoxime method (for molybdenum greater than 1 percent) (third revision)

8

IS 228(Part 8):1989

Part 8 Determination of silicon by gravimetric method (for Nov 2009 silicon 0.05 to 0.50percent) (third revision)

9

IS 228(Part 9):1989

Part 9 Determination of sulphur in plain carbon steels by Nov 2009 evolution method (forsulphur 0.01 to 0.25 percent) (third revision)

10

IS 228(Part 10):1989

Part 10 Determination of molybdenum by thiocynate (photometric) method in low and high alloy steels (for molybdenum 0.01 to 1.5 percent) (third revision)

May 2009

11

IS 228(Part 11):1990

Part 11 Determination of total silicon by reduced molybdosilicate spectro photometric method in carbon steels and low alloy steels (for silicon 0.01 to 0.05 percent) (third revision)

May 2009

12

IS 228(Part 12):2001

Part 12 Determination of manganese by periodate spectrophotometric method in low and high alloy steels (for manganese 0.01 to 2.0 percent) (fourth revision)

May 2009



92

May 2006

1

13

IS 228(Part 13):1982

Part 13 Determination of arsenic

14

IS 228(Part 14):1988

Part 14 Determination of carbon by thermal conductivity Nov 2009 method (for ca rbon 0.005 to 2.000 percent)

15

IS 228(Part 15):1992

Part 15 Determination of copper by thiosulphate iodide May 2009 method (for copper 0.05to 5 percent)

16

IS 228(Part 16):1992

Part 16 Determination of tungsten by spectrophotometric May 2009 method (for tungsten 0.1 to 2 percent)

17

IS 228(Part 17):1998

Part 17 Determination of nitrogen by thermal conductivity Sep 2010 method (for nitrogen upto 0.4 percent)

18

IS 228(Part 18):1998

Part 18 Determination of oxygen by instrumental method May 2006

19

IS 228(Part 19):1998

Part 19 Determination of nitrogen by steam distill ation

Sep 2010

20

IS 228(Part 20):2003

Methods of chemical analysis of steels Part 20 Determination of carbon and sulphur by infra-red absorption method

Dec 2008

21

IS 228(Part 21):2003

Methods of chemical analysis of steel Part 21 Determination of copper by spectrometric method (for copper 0.02 to 0.5 percent) (Revision of IS 228)

Dec 2008

22

IS 228(Part 22):2003

Methods of chemical analysis of steels Part 22 Determination of total hydrogen in steel by thermal conductivity method

Dec 2008

23

IS 228(Part 23):2003

Methods of chemical analysis of steel Part 23 Determination of nitrogen in steel by optical emission spectrometer

Dec 2008

24

IS 228(Part 24):2003

Methods of chemical analysis of steel Part 24 Determination of nitrogen steel blby inert gas fusionthermal conductivity method

Dec 2008

25

IS 403:1964

Methods of chemical analysis of lead and antimonial lead Jul 2010 (revised)

26

IS 406:1964

Methods of chemical analysis of slab zinc (spelter) (revised)

Jul 2010

27

IS 440:1964

Methods of chemical analysis of copper (revised)

Apr 2006

28

IS 504:1963

Methods of chemical analysis of aluminium and its alloys Mar 2010 (revised)

29

IS 504(Part 1):2002

Methods of Chemical analysis of aluminium and its alloys Dec 2007 Part 1 Determination of silicon (first revision)

30

IS 504(Part 2):2000

Part 2 Determination of iron (first revision)

Dec 2007

31

IS 504(Part 3):2003

Part 3 Determination of copper (first revision)

Dec 2007



93

May 2009

32

IS 504(Part 4):2002

Part 4 Determination of zinc (first revision)

Dec 2007

33

IS 504(Part 5):2002

Part 5 Determination of manganese (first revision)

Dec 2007

34

IS 504(Part 6):2002

Part 6 Determination of magnesium (first revision)

Dec 2007

35

IS 504(Part 7):2002

Methods of chemical analysis of aluminium and its alloys Dec 2007 Part 7 Determination of nickel (first revision)

36

IS 504(Part 8):2002

Part 8 Determination of chromium (first revision)

Dec 2007

37

IS 504(Part 9):2002

Part 9 Determination of tin (first revision)

Dec 2007

38

IS 504(Part 10):2002

Part 10 Determination of antimony (first revision)

Dec 2007

39

IS 504(Part 11):2002

Part 11 Determination of titanium (first revision)

Dec 2007

40

IS 504(Part 12):2002

Part 12 Determination of vanadium (first revision)

Dec 2007

41

IS 504(Part 13):2003

Part 13 Determination of Sodium

Dec 2007

42

IS 504(Part 14):2003

Part 14 Determination of Berrileum

Dec 2007

43

IS 504(Part 15):2003

Part 15 Determination of Zirconium

Dec 2007

44

IS 504(Part 16):2003

Part 16 Determination of Lithium

Dec 2007

45

IS 998(Part 1):1983

Methods of chemical analysis of solders (soft and rosin cored) Part 1 Determination of tin and antimony (first revision)

May 2008

46

IS 998(Part 2):1983

Part 2 Determination of iron,copper and arsenic (first revision)

May 2008

47

IS 998(Part 3):1983

Part 3 Determination of cadmium, zinc, aluminium, bismuthMay 2008 and nickel (first revision)

48

IS 999:1959

Method of chemical analysis of brazing solder

49

IS 1047:1965

Methods of chemical analysis of antimony (revised)

50

IS 1335:1979

Methods for direct determination of alumina in refractory Oct 2006 materials (first revision)

51

IS 1409:1959

Methods of chemical analysis of antifriction bearing alloys Jul 2010

52

IS 1472:1977

Methods of sampling ferro alloys for determination of chemical composition (first revision)



94

May 2008 Jul 2010

Oct 2006

1

53

* IS 1493:1959

Methods of chemical analysis of iron ores

Oct 2006

54

IS 1493(Part 1):1981

Methods of chemical analysis of iron ores Part 1 Determination of common constituents

Oct 2006

55

IS 1493(Part 3):1987

Part 3 Determination of titanium, chromium, vanadium, calcium and magnesium by atomic absorption spectrophotometry

Oct 2006

56

IS 1493(Part 4):1988

Part 4 Determination of aluminium by atomic absorption spectrophotomety

Oct 2006

57

IS 1493(Part 5):1990 / ISO 4693:1986

Part 5 Determination of copper content atomic absorption Oct 2006 spectrometric method

58

IS 1493(Part 6):1990 / ISO 6831:1986

Part 6 Determination of sodium and/or potassium Oct 2006 contents-Flame atomic abssorption spectrometric method

59

IS 1493(Part 7):1993 / ISO 8753:1987

Part 7 Determination of lead and or zinc content - Flame Oct 2006 atomic absorption spectrometric method (first revision)

60

IS 1493(Part 8):1993 / ISO 7834:1987

Part 8 Determination of arsenic content - Molybdenum blue spectrophotometric method (first revision)

Oct 2006

Methods for chemical analysis of high silica refractory materials (first revision)

Oct 2006

Methods of chemical analysis of ferro alloys

Sep 2007

61

IS 1527:1972

62

* IS 1559:1961

63

IS 1559:2003

Chemical analysis of Ferrosilicon-Magnesium Alloy - Part 1 Determination of silicon gravimetric method (Revision of IS 1559)

64

IS 1559(Part 1):1988

Methods of chemical analysis of ferro silicon Part 1 Determination of silicon (second revision)

Mar 2009

65

IS 1559(Part 2):1982

Part 2 Determination of carbon (first revision)

Sep 2007

66

IS 1559(Part 3):1982

Part 3 Determination of sulphur (first revision)

Sep 2007

67

IS 1559(Part 4):1982

part 4 Determination of phosphorus (first revision)

Sep 2007

68

IS 1559(Part 5):2003

Chemical anlaysis of ferrosilicon, Part 5 Determination of Mar 2009 aluminium in ferrosilicon (Aluminium 0.05 to 1.75%) (second revision of IS 1559)

69

IS 1559(Part 6):1982

Part 6 Determination of calcium (first revision)

Sep 2007

70

IS 1559(Part 7):1982

Part 7 Determination of manganese (first revision)

Sep 2007

71

IS 1760(Part 1):1991

Methods of chemical analysis of limestone, dolomite and Oct 2006 allied materials Part 1 Determination of loss on ignition (first revision)

72

IS 1760(Part 2):1991

Part 2 Determination of silica (first revision)



95

Oct 2006

73

IS 1760(Part 3):1992

Part 3 Determination of iron oxide, alumina, calcium oxide Oct 2006 and magnesia (first revision)

74

IS 1760(Part 4):1991

Part 4 Determination of carbon dioxide (first revision)

Oct 2006

75

IS 1760(Part 5):1991

Part 5 Determination of chlorides (first revision)

Oct 2006

76

* IS 1760(Part 6):2001

Part 6 Determination of free silica (first revision)

Oct 2006

77

IS 1917(Part 1):1991

Chemical analysis of quartzite and high silica sand Part 1 Oct 2006 Determination of loss on ignition (first revision)

78

IS 1917(Part 2):1991

Part 2 Determination of sodium and potassium by flame photometry (first revision)

Oct 2006

79

IS 1917(Part 3):1992

Part 3 Determination of silica (first revision)

Aug 2005

80

IS 1917(Part 4):1991

Part 4 Determination of aluminium by AAS method (first revision)

Oct 2006

81

IS 1917(Part 5):1992

Part 5 determination of iron by AAS method (first revision)

Aug 2005

82

IS 1917(Part 6):1992

Part 6 Determination of calcium and magnesium by atomicAug 2005 absorption spectrometric method (first revision)

83

* IS 1917(Part 7):2001

Part 7 Determination of titania (first revision)

Oct 2006

84

IS 1940:1969

Methods of chemical analysis of tin ingot (first revision)

Jul 2010

85

IS 1952:1963

Methods of chemical analysis of nickel anodes

Jul 2010

86

IS 1999:1987

Methods of sampling bauxite (first revision)

Nov 2008

87

IS 2000(Part 1):1985

Methods of chemical analysis of bauxite Part 1 Determination of loss on ignition(first revision)

Oct 2006

88

IS 2000(Part 2):1985

Part 2 Determination of silica (first revision)vision)

Oct 2006

89

IS 2000(Part 3):1985

Part 3 Determination of alumina (first revision)

Oct 2006

90

IS 2000(Part 4):1985

Part 4 Determination of ferric oxide (first revision)

Oct 2006

91

IS 2000(Part 5):1985

Part 5 Determination of titania (first revision)

Oct 2006

92

IS 2000(Part 6):1985

Part 6 Determination of vanadium (first revision)

Oct 2006

93

IS 2000(Part 7):2001

Part 7 Determination of phosphorus pentroxide (first revision)

Oct 2006



96

1

94

IS 2000(Part 8):1989

Part 8 Determination of manganese by atomic absorption Oct 2006 spectrophotometric method (first revision)

95

IS 2000(Part 9):1989

Part 9 Determination of magnesiuum and calcium by atomic absorption spectrophotometric method (first revision)

Oct 2006

96

IS 2017:1967

Methods of Chemical analysis of metallic manganese

Sep 2007

97

* IS 2018:1998

Methods of chemical analysis of calcium silicon (second Sep 2007 revision)

98

IS 2020(Part 1):1968

Methods of chemical analysis of silico chromium Part 1 analysis of silicon and chromium

Sep 2007

99

IS 2277:1964

Methods of chemical analysis of metallic silicon

Sep 2007

100

IS 2390:1967

Methods for chemical analysis of foundry nickel

Jul 2010

101

IS 2411:1963

Methods of chemical analysis of fluorspar (fluorite)

Oct 2006

102

IS 2599:1983

Methods for spectrographic analysis of high purity zinc and zinc base alloys for die casting (first revision)

Jul 2010

103

IS 2600(Part 1):1988

Methods of chemical analysis of zinc and zinc base May 2008 alloys for die castings Part 1 Determination of copper, iron, nickel, tin and thallium by spectrophotometric method (first revision)

104

IS 2600(Part 2):1988

Part 2 Determination of copper,iron, lead and cadmium May 2008 by atomic absorption spectrophotometric method (first revision)

105

IS 2600(Part 3):1993

Part 3 Determination of Indium by atomic absorption spectrometry method (first revision)

106

IS 2600(Part 4):1993

Part 4 - Determination of chromium by spectrophotometricMay 2008 method

107

IS 2766(Part 1):1968

Methods of chemical analysis of primary nickel

Jul 2010

108

IS 3186:1965

Methods of chemical analysis of cadmium copper

Apr 2006

109

IS 3187:1965

Methods of chemical analysis of copper-nickel zinc alloys Apr 2006

110

IS 3200:2001

Methods of chemical analysis of cryolite (first revision)

111

IS 3295(Part 1):1969

Method of chemical analysis of ferroboron Part 1 Analysis of carbon, silicon and aluminium

Mar 2009

112

IS 3295(Part 2):1970

Part 2 Determination of boron

Mar 2009

113

IS 3685:1966

Methods of chemical analysis of brasses

Apr 2006



97

May 2008

Oct 2007

1

1

114

IS 3863:1966

Methods of chemical analysis of copper-tellurium alloys

Apr 2006

115

IS 4027(Part 1):1987

Methods of chemical analysis of bronzes Part 1 Determination of copper and leadby electrolytic method (first revision)

Apr 2006

116

IS 4027(Part 2):1987

Part 2 Determination of manganese-photometric method Apr 2006 (first revision)

117

IS 4027(Part 3):1987

Part 3 Determination of phosphorus by volumetric method (first revision)

Apr 2006

118

IS 4027(Part 4):1987

Part 4 Determination of nickel-dimethylglyoxime photometric method (first revision)

Apr 2006

119

IS 4027(Part 5):1987

Part 5 Determination of tin-iodimetric method (first revision)ethod (first revision)

Apr 2006

120

IS 4027(Part 6):1987

Part 6 Determination of zinc by complexometric (EDTA) method (first revision)

Apr 2006

121

IS 4027(Part 7):1990

Part 7 Determination of antimony by Rhodamine B spectrophotometric method (firsr revision)

Dec 2007

122

IS 4027(Part 8):1991

Part 8 Determination of iron (first revision)

Dec 2007

123

IS 4027(Part 9):1991

Part 9 Determination of aluminium by AAS method (first Dec 2007 revision)

124

IS 4027(Part 10):2000

Part 10 Determination of silicon

Apr 2006

125

IS 4027(Part 11):2000

Part 11 Determination of Lead- Ethylenediamine Tetraacetic acid (EDTA) - Titrimetric method

Apr 2006

126

IS 4104:1967

Method of chemical analysis of rutile

Oct 2006

127

IS 4129:1967

Methods of chemical analysis of aluminium trifluoride

Oct 2006

128

IS 4354(Part 1):1967

Methods of chemical analysis of magnesium, aluminium Jul 2010 brazing alloys, Part 1 Analysis of aluminium, manganese, zinc and silicon

129

IS 4548(Part 1):1967

Methods of chemical analysis of copper gold brazing alloys Part 1 Analysis of gold and copper

Apr 2006

130

IS 4646(Part 1):1968

Methods of chemical analysis of copper phosphorus brazing alloys, Part 1 Analysis for silver and copper

Dec 2007

131

IS 4646(Part 2):1976

Part 2 Determination of phosphorusnation of phosphorus Dec 2007

132

IS 4667(Part 1):1968

Methods of chemical analysis of silver copper brazing alloys Part 1 Analysis for silver and copper

Dec 2007

133

IS 4667(Part 2):1969

Part 2 Determination of silver, copper and tin

Dec 2007

134

IS 4667(Part 3):2001

Part 3 Determination of nickel, cadmium and zinc

Apr 2006





98

1

135

IS 4667(Part 4):2001

Part 4 Determination of copper, cadmium and zinc by electrolytic method

Apr 2006

136

IS 5425(Part 1):1969

Methods of chemical analysis of misch metal Part 1 Determination of cerium

Dec 2007

137

IS 5425(Part 2):1984

Part 2 Determination of total rare earths

Dec 2007

138

IS 5425(Part 3):1987

Part 3 Determination of iron

Mar 2010

139

IS 5425(Part 4):1987

Part 4 Determination of aluminium

Mar 2010

140

IS 5425(Part 5):1987

Part 5 Determination of carbon

Mar 2010

141

IS 6226(Part 1):1994

Recommendations for apparatus for chemicals analysis Nov 2009 of metals,Part 1 Apparatusfor determination of carbon by direct combustion (first revision)

142

IS 6226(Part 2):1987

Part 2 Determination on of sulphur by direct combustion Feb 2008

143

IS 6516:1972

Methods for chemical analysis of tin and lead in secondary tin

Jul 2010

144

IS 6744(Part 1):1972

Methods of chemical analysis of ilemenite

Oct 2006

145

IS 7658:1975

Spectrographic analysis of aluminium

Mar 2010

146

IS 7659(Part 1):1975

Reagents and standard solutions for use in chemical analysis of metals, ores and minerals Part 1 volumetric solution

Oct 2006

147

IS 8097:1976

Methods of chemical analysis of soft solders for jointing aluminium and aluminium alloys

Jul 2010

148

IS 8812(Part 1):1978

Methods for chemical analysis of hard solders for jointing May 2008 aluminium and aluminium alloys, Part 1 Determination of silver, copper, zinc, antimony ,arsenic, iron and b ismuth

149

IS 8812(Part 2):1982


150

IS 8816:1978

Methods for selection and preparation of samples for spectrographic analysis ofzinc and zinc alloy ingots

Jul 2010

151

IS 9386:1979

Methods for chemical analysis of rock phosphate

Oct 2006

152

* IS 10085:2003

153 154

May 2008

Methods for chemical analysis of zircon flour or sand (first revision)

Nov 2008

IS 10816:1984

Methods of sampling zinc and lead concentrates

Nov 2008

IS 11035:1984

Methods for spectrographic analysis of wrought aluminium alloys

Mar 2010



99

1

155

IS 11690:1986

Methods of moisture determination of iron ore lot

156

IS 12107(Part 1):1987

Methods of chemical analysis of alumino-silicate Oct 2006 refractory materials Part 1 Determination of loss on ignition

157

IS 12107(Part 2):1987

Part 2 Determination of silica

Oct 2006

158

IS 12107(Part 3):1987


Oct 2006

159

IS 12107(Part 4):1987

Part 4 Determination of phosphorus

Oct 2006

160

IS 12107(Part 5):1987

Part 5 Determination of titanium

Oct 2006

161

IS 12107(Part 6):1987


Oct 2006

162

IS 12107(Part 7):1987

Part 7 Determination of manganese

Oct 2006

163

IS 12107(Part 8):1987

Part 8 Determination of calcium and magnesium

Oct 2006

164

IS 12107(Part 9):1987

Part 9 Determination of sodium and potassium by flame photometry

Oct 2006

165

IS 12107(Part 10):2001

Part 10 Determination of iron, manganese, calcium and magnesium by AAS method

Oct 2006

166

IS 12308(Part 7):1991

Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent)

Oct 2006

167

IS 12614(Part 1):1988

Method of chemical analysis of ferro molybdenum Part 1 Determination of molybdenum

Mar 2009

168

IS 12614(Part 2):1988

Part 2 Determination of total carbon

Mar 2009

169

IS 12614(Part 3):1988

Part 3 Determination of siliconON

Mar 2009

170

IS 12614(Part 4):1988

Part 4 Determination of sulphur

Mar 2009

171

IS 12614(Part 5):1988

Part 5 Determination of phosphorus

Mar 2009

172

IS 12614(Part 6):1988

Part 6 Determination of copper

Mar 2009

173

IS 12614(Part 7):1988


Mar 2009

174

IS 12667(Part 1):1989

Methods of chemical analysis of chromite sand Part 1 Determination of silica

Oct 2006

175

IS 12667(Part 2):1989


Oct 2006



100

Nov 2008

176

IS 12667(Part 3):1989

Part 3 Determination of chromium

Oct 2006

177

IS 12667(Part 4):1989

Part 4 Determination of calcium oxide

Oct 2006

178

* IS 13452(Part 1):1992

Methods of chemical analysis of ferrochromium Part 1 Determination of silicon in high carbon ferrochromium by gravimetiric method

Sep 2007

179

* IS 13452(Part 2):1992

Part 2 Determination of silicon in low carbon ferrochromium by gravimetric method

Sep 2007

180

* IS 13452(Part 3):1992

Part 3 Determination of phosphorus in low carbon ferrochromium by spectrometricmethod

Sep 2007

181

* IS 13452(Part 4):1992

Part 4 Determination of total sulphur in low carbon and Sep 2007 high carbon ferrochromium by direct combustion method

182

* IS 13452(Part 5):1992

Part 5 Determination of chromium in high carbon ferrochromium chargechrome by dichromate titration (first revision)

Mar 2009

183

* IS 13452(Part 6):1997

Part 6 Determination of chromium in low carbon ferro chromium

Sep 2007

184

* IS 13452(Part 7):2003

Chemical analysis of ferrochromium Part 7 Determination Mar 2009 of phosphorus in ferrochromium/chargechrome by alkalimetric method

185

* IS 13840(Part 1):1993

Chemical analysis of ferro titanium Part 1 Determination Mar 2009 of carbon by direct combustion gravimetric method

186

* IS 13840(Part 2):1993

Part 2 Determination of silicon by gravimetric method

Mar 2009

187

* IS 13840(Part 3):1993

Part 3 Determination of titanium by cupferron (gravimetric) method

Mar 2009

188

* IS 13840(Part 4):1998

Part 4 Determination of aluminium by phosphate method Mar 2009

189

* IS 13840(Part 5):1998

Part 5 Determinations of sulphur by direct combusion method

Mar 2009

190

* IS 13840(Part 6):1998

Part 6 Determination of titanium by x-ray fluorescence technique

Mar 2009

191

IS 13938(Part 1):1994

Chemical analysis of ferromanganese Part 1 Determination of silicon by gravimetric method

Mar 2009

192

IS 13938(Part 3):1993

Chemical analysis of ferromanganese Part 3 Mar 2009 Determination of phosphorous by volumetric (alkalimetric) method

193

IS 13938(Part 4):1994

Chemical Analysis of Ferromangnese, Part-4 Determination of Total Sulpher by direct Combustion Method

Mar 2009

194

IS 13963(Part 1):1994

Chemical analysis of cadmium metal - Part 1 Determination of copper, zinc, leadand iron

May 2008



101

195

IS 13963(Part 2):1994

Chemical analysis of cadmium metal Part 2 Determination May 2008 of nickel, arsenic, antimony and thallium by spectrometric methods

196

IS 14529:2004

Chemical analysis of ferro silicon magnesium alloy (first Mar 2011 revision)

197

IS 14644(Part 1):1998 / ISO 7530-1-1:1990

Nikel alloys - Flame atomic absorption spectrometric analysis method - Part 1 General requirements and sample dissolution

Jul 2010

198

IS 14644(Part 2):1998 / ISO 7530-2:1990 IS 14644(Part 3):1998 / ISO 7530-3:1990 IS 14644(Part 4):1998 / ISO 7530-4:1990 IS 14644(Part 5):1998 / ISO 7530-5:1990 IS 14644(Part 6):1998 / ISO 7530-6:1990 IS 14644(Part 7):2000 / ISO 7530 -7:1992 IS 14644(Part 8):2000 / ISO 7530-8:1992 IS 14644(Part 9):2000 / ISO 7530-9:1993 IS 15396:2003

Part 2 Determination of cobalt content

Jul 2010

Part 3 Determination of chromium content

Jul 2010

Part 4 Determination of copper content

Jul 2010

Part 5 Determination of iron content

Jul 2010

Part 6 Determination of manganese content

Jul 2010

Part 7 Determination of aluminium content

Jul 2010

Part 8 Determination of silicon content

Jul 2010

Part 9 Determination of vanadium content

Jul 2010

199 200 201 202 203 204 205 206 207

IS 15403:2003

Chemical analysis of ferro silicon zirconium alloy

Mar 2011

Method for determination of sulphur present in sponge iron after separation of non magnetic materials

Mar 2011


DOC.MTD 34(4804)

Chemical analysis of ferro chromium (first revision of IS 13452)

2

DOC.MTD 34(4805)

Chemical analysis of ferrotitanium (revision of IS 13840)

3

DOC.MTD 34(4850)

Method for chemical analysis of steels, Part 20 Determination of carbon and sulphur by infra-steel absorption method (for carbon 0.005 to 2.1% and sulphur 0.0005 to 0.35%) (third revision of IS 228(Part 20)



102

ANNEX I STANDARD PREPARED UNDER DUAL NUMBERING SYSTEM IS/ISO 1403(Pt 1):1993 (ISO 7759:1985) 1493(Pt 5):1990 (ISO 4693:1986) 1493(Pt 6):1990 (ISO 6831:1986) 1493(Pt 7):1973 (ISO 8753:1989) 1493(Pt 8):1993

TITLE Mechanical testing of metals – Reverse bend test Part 1 Sheet and Strip ( second revision ) Method of chemical anlaysis of iron ores Part 5 Determination of copper content by atomic absorption spectrometric method Part 6 Determination of sodium and/or potassium contents – Flame atomic absorption spectrometric method Part 7 Determination of lead or zinc content flame atomic absorption spectrophotometric method (first revision )

(ISO 7834:1987)

Part 8 Determination of arsenic content – Molybdenum blue spectrophotometric method (first revision )

1500:2005

Method for brinell hardness test for metallic materials (third revision )

(ISO 6506-1:1999) 1501:2002

Method for Vickers hardness test for metallic materials ( third revision )

(ISO 6507-1:1987) 1528(Pt 5):2007 (ISO 5014:1997)

Methods of sampling and physical tests for refractory materials, Part 5 Method for determination of modulus of rupture at ambient temperature of dense and insulating shaped refractory products (third revision )

1528(Pt 9):2007

Part 9 Determination of true density ( fourth revision )

ISO 5018:1983 1528(Pt 12):2007 (ISO 5016:1997)

Methods of sampling and physical tests for refractory materials Part 12 Method for determination of bulk density and true porosity of shaped insulating refractory products (second revision )

1528(Pt 13):2007

Part 13 Determination of resistance to carbon monoxide ( second revision )

ISO 12676:2000 1528(Pt 15):2007 (ISO 5017:1998) 1528(Pt 16):2007

Methods of sampling and physical tests for refractory materials Part 15 Method for determination of bulk density, apparent porosity and true porosity of dense shaped refractory products (first revision )

ISO 8894-2:1990

Methods of sampling and physical tests for refractory materials Part 16 Determination of thermal conductivity according to hot-wire method (parallel) (first revision )

1528(Pt 17):1993

Part 17 Determination of cold crushing strength of shaped insulating refractory products

(ISO 8895:1986) 1528(Pt 18):1993

Part 18 Determination of creep in compression

(ISO 3187:1989) 1528(Pt 20):1993

Part 20 Determination of modulus of rupture at elevated temperature

(ISO 5013:1985) 1528(Pt 21):2007

Part 21 Determination of thermal conductivity according to hot-wire method (cross-array)

ISO 8894-1:1987 1528(Pt 22):2007 ISO 8841:1991

Part 22 Methods for determination of permeability to gases of dense shaped refractory products 103

1608:2005

Metallic materials – Tensile testing at ambient temperature (third revision )

(ISO 6892:1998) 1828(Pt 1):2005 (ISO 7500-1:1999)

Metallic materials – verification of static uniaxial testing machines Part 1 Tension/Compression testing machines – Verification and calibration of the forcemeasuring system (third revision )

1828(Pt 2):2002

Part 2 Tension creep testing machines – verification of applied load

(ISO 7500-2:1996) 1993:1993 (ISO 1111-1:1983)

Single cold-reduced tinplate and single cold reduced black plate – electrolytic and hot dipped tinplate sheets and black plate sheet (third revision )

2281:2005

Method for verification of brinell hardness testing machines (third revision )

(ISO 6506-2:1999) 2328:2005

Metallic materials – Tube flattening test (second revision )

(ISO 8492:1998) 2329:2005

Metallic materials – Tube (in full section) – Bend test (second revision )

(ISO 8491:1986) 2335:2005

Metallic materials – Tube drift expanding test (second revision )

(ISO 8493:1998) 3600(Pt 3):2009 (ISO 4136):2001 3600(Pt 5):1983

Methods of testing of non-welding joints and weld metal in steel Part 3 Transverse tensile test on butt welds

(ISO 5173:1981)

Methods of testing of non-welding joints and weld metal in steel Part 5 Transverse root and bend test on butt weld (second revision )

3600(Pt 6):1993

Part 6 Transverse side and bend test on butt weld (second revision )

(ISO 5177:1981) 3803(Pt 1):1989 (ISO 2566-1:1984)

Steel – conversion of elongation value Part 1 Carbon and Low alloy steels (second revision )

3803(Pt 2):1989

Steel – conversion of elongation values Part 2 Austenitic steels (second revision )

(ISO 2566-2:1984) 4041:2006

Terminology for refractories (first revision )

(ISO 836:2001) 4132:2005 (ISO 6506-3:1999) 4133:2002 (ISO 6507-3:1997) 4163:2004 (ISO 4967:1998) 4840:2006 (ISO 4490:2001) 4857:2005 (ISO 3927:2001) 5642:1991 (ISO 2738:1987) 5644(Pt 1):1993 (ISO 4491-1:1989)

Method for calibration of standardized blocks to be used for brinell hardness testing machines (second revision ) Method for calibration of standardized blocks to be used for Vickers hardness testing machines (second revision ) Steel – Determination of content of nonmetallic inclusions – Micrographic method using standard diagrams (third revision ) Metallic powders – Determination of flow time by means of a calibrated funnel (Hall flow meter) (second revision) Metallic powders, excluding powders for hard metals – Determination of compactibility (compressibility) in uniaxial compression (fourth revision ) Permeable sintered metal materials – Determination of density, oil content, and open porosity (second revision ) Metallic powders – Determination of oxygen content by reduction methods, Part 1 General guidelines (third revision ) 104

5644(Pt 2):2005

Part 2 Loss of mass on hydrogen reduction (hydrogen loss) (fourth revision )

(ISO 4491-2:1997) 5644(Pt 3):2005

Part 3 Hydrogen reducible oxygen (fourth revision )

(ISO 4491-4:1989) 5644(Pt 4):1993

Part 4 Total oxygen by reduction extraction ( third revision )

(ISO 4491-4:1989) 5652(Pt 1):1993

Hard metals- Rockwell hardness test (Scale A)

(ISO 3728:1993) 8871:2004

Metallic powders – Determination of tap density (second revision )

(ISO 3953:1993) 9025:1993 (ISO 1111-2:1983) 10175(Pt 1):1993

Single cold-reduced tinplate and single cold-reduced black plate – electrolytic tinplate coil and black plate coil for subsequent cutting into sheet form (first revision )

(ISO 8490:1986)

Mechanical testing of metals – Modified erichsen cupping test – sheet and strip Pt 1 Thickness upto 2 mm (first revision)

10793:1983

Classification of imperfection in metallic fusion welds with explanations

(ISO 6520:1982) 11506:2004 (ISO 13944:1996)

Method for determination of lubricant content of lubricated lubri cated metallic powder by soxhlet extraction (first revision )

11999:2007

Method for determination of plastic strain ration `r’ for sheet metals (first revision )

(ISO 10113) 12228:1987

Scale adhesion test for oxygen free copper

(ISO 8495:1986) 12260:1987

Ring expanding test on metallic tubes

(ISO 8495:1986) 12279:2005 (ISO 3325:1996)

Sintered metal materials (excluding hardmetals) – Determination of transverse strength (first revision)

12591:2006

Cold-reduced electrolytic chromium/chromium oxide coated steel (first revision)

(ISO 11950:1995) 12872:1990

Metallic materials – verification of extensometers used in uniaxial testing

(ISO 9513:1989) 12893:2006

Pyrometric reference cones for laboratory use – Specification (first revision)

(ISO 1146:1998) 13007:1991 (ISO 6848:1984) 13043:1991

Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding

(ISO 2401:1972)

Covered manual metal arc welding electrodes – Determination of efficiency, metal recovery and deposition co-efficient

13691:1993

Steel – Determination of total or effective thickness of thin surface hard metals layers

(ISO 4970:1979) 13780:1993

Hard metals – Compression test

(ISO 4506:1979) 13781:1993

Permeable sintered metal materials – Determination Determination of bubble test pore size

(ISO 4003:1977)

105

13782:1993

Permeable sintered metal materials – Determination of fluid permeability

(ISO 4022:1987) 13803:1993

Sintered metal materials and hard metals – Determination of young modulus

(ISO 3312:1987) 13954:1994 (ISO 4977-1:1988)

Double cold-reduced electrolytic tin plate sheet

13955:1994

Double cold-reduced electrolytic tin plate sheet for subsequent cutting into sheets

(ISO 4977-2:1988) 14126:1994

Metallic coatings – measurement of thickness coluometric method

(ISO 2177:1985) 14149:1994

Metallic and non-metallic coating – measurement of thickness – Beta backscatter method

(ISO 3543:1981) 14644(Pt 1):1998 (ISO 7530-1:1990)

Nickel alloys – Flames atomic absorption spectrometric analysis Part 1 General requirements and sample dissolution

14644(Pt 2):1998

Part 2 Determination of cobalt content

(ISO 7530-2:1990) 14644(Pt 3):1998

Part 3 Determination of chromium content

(ISO 7530-3:1990) 14644(Pt 4):1998

Part 4 Determination of copper content

(ISO 7530-4:1990) 14644(Pt 5):1998

Part 5 Determination iron content

(ISO 7530-5:1990) 14644(Pt 6):1998

Part 6 Determination of manganese content

(ISO 7530-6:1990) 14644(Pt 7):2000

Part 7 Determination of aluminium content

(ISO 7530-7:1990) 14644(Pt 8):2000

Part 8 Determination of silicon content

(ISO 7530-8:1990) 14644(Pt 9):2000

Part 9 Determination of vanadium content

(ISO 7530-9:1990) 14741:1998

Colours of gold alloys – Definition, range of colours and designation

(ISO 8654:1987) 15326(Pt 1):2003 (ISO 3834-1:1994)

Quality requirements for welding – Fusion welding of metallic materials Part 1 Guidelines for selection and use

15326(Pt 2):2003

Part 2 Comprehensive quality requirements

(ISO 3834-2:1994) 15326(Pt 3):2003

Part 3 Standards quality requirements

(ISO 3834-3:1994) 15326(Pt 4):2003

Part 4 Elementary quality requirements

(ISO 3834-4:1994) 15327:2003

Welding coordination – Tasks and responsibility

(ISO 14731:1997)

106

15387:2003

Resistance spot welding – male electrode caps

(ISO 5830:1984) 15426:2004

Steel – Metallographic characterization of duplex grain size and distributions

(ISO 14250:2000) 15554:2004

Sintered metal materials, excluding hard metals – Tensile test piece

(ISO 2740:1999) 15567:2005

Sintered metal material, excluding hard metal – Fatigue test piece

(ISO 3928:1999) 15574:2005

Sintered metal materials excluding hardmetals – Unnotched impact test piece

(ISO 5754:1978) 15585:2005

Sintered metal materials - Specification

(ISO 5755:2001) 15728:2006

Welding friction welding of metallic materials

(ISO 15620:2000) IS 15703:2006 ISO 4498:2005

Sintered metal materials, excluding hardmetals – Determinaiton of apparent hardness and microhardness

IS 15756:2007

Metallic Materials- Sheet and Strip – Determination of Tensile Strain Hardening Exponent

ISO 10275:1993 IS 15839:2009

Determination of ferrite content in Austenitic stainless steel castings

ISO 13520:2002 IS/ISO 10474:1991

Steel & Steel products – Inspection document

IS/ISO 16124:2004

Steel wire rod – Dimensions and tolerances

IS/ISO 16160:2005

Continuous hot rolled steel sheet products – Dimensional and shape tolerance

IS/ISO 16162:2005

Continuous cold-rolled steel sheet products – Dimensional and shape tolerance

IS/ISO 16163:2005

Continuous hot dipped coated steel products dimensional & shape tolerances

107

ANNEX II

STANDARDS WITHDRAWN / SUPERSEDED Sl. No. Committe No. IS No./ DOC Number

Title

1

4

SP 2 : 1982

Comparison of Indian and overseas basic sizes for sheet and wire (first revision)

2 3 4

15

IS 7:1980 IS 20:1977 IS 22:1950

Moderate heat duty fireclay refractories group B (Withdrawn) Superseded by IS 617:1994 98 pecent aluminium notched bars and ingots for remelting purposes (tentative)(Withdrawn) (see IS 2590)

5 6 7

11 7

IS 24:1956 IS 29:1950 IS 30:1953

Brazing solder (revised) (Superseded by IS 2927:1950) Aluminium sheet and coils for aircraft purpose (Withdrawn) Aluminium coated high-tensile aluminium alloy sheets and coils for aircraft purposes (Withdrawn)

8

7

IS 31:1950

Aluminium manganese alloy sheets and coils (Withdrawn) (see IS 737:1986)

IS 192:1956 IS 194:1950 IS 223:1950 IS 224:1979 IS 225:1969 IS 226:1975

Silver solder (revised) (Superseded by IS 2927:1975) Recommendations for refractories for railways (Withdrawn) Tensile testing of metals (ferrous) (Withdrawn) Foundry pig iron for general purposes (see IS 13502:1992) Pig iron (charcoal) (second revision) (Withdrawn) Structural steel (standard quality) (fifth revision) (Superseded by IS 2062:1992) Malleable iron castings (Withdrawn) (see IS 2107 and 2108) Manganese ore-battery grade (tentative) (Withdrawn) (see IS 1449 & 1473)

7 7

7

9 10 11 12 13 14

11

15 16

6 13

IS 227:1954 IS 372:1962

17

13

IS 373:1952

Manganese ore metallurgical grade (tentative) (Withdrawn)-(see IS 4763 and 1473)

18

24

IS 429:1954

Methods for testing weight and uniformity of coatings on galvanized iron and steel wires and steel sheets (Superseded by IS 2633) (Withdrawn)

19 20 21

9

IS 441:1955 IS 442:1954 IS 485:1954

Methods for chemical analysis of brasses and bronzes(Withdrawn) Drums for paints (Superseded by IS 2552:1989) Methods of sampling and testing of refractory materials (Tentative) (Withdrawn)(see IS 1527, IS 1528 Part I to 14)

4

IS 497:1953 IS 503:1963 IS 597:1978 IS 618:1956 IS 727:1964

Tensile testing of metals (non-ferrous) (Withdrawn) Alloy austenitic manganese steel castings (Withdrawn) (see IS 276) Pack-rolled tinplate and pack rolled black plate (second revision) Kegs (open top drums) for paints (Superseded by IS 2552:1989) Hard drawn carbon steel wire for springs for general engineering pruposes (revised) (Withdrawn)

27

24

IS 728:1956

Methods for determining of weight, thicikness and uniformity of coating on galvanised articles other than wires and sheets (Superseded by IS 2633)

28

7

IS 735:1956

Wrought aluminium and aluminium alloys forging stock (for general engineeing purposes ) (Superseded by IS 734:1975)

22 23 24 25 26

15 3 6 6 4

32 15 3 14 4 32

108

Sl. No. Committe No. IS No./ DOC Number

Title

29

11

IS 815:1974

Classification coding of covered electrodes for metal arc welding of structuralsteels (second revision) (Superseded by IS 814:1991)

30

11

IS 823:1964

Code of procedure for manual metal arc welding of mild steel (Withdrawn)

31

4

IS 961:1975

Structural steel (high tensile) (second revision) (Superseded by IS 8500)

32 33 34

9 8

IS 998:1959 IS 1111:1964 IS 1138:1958

Methods of chemical analysis of soft solder (Withdrawn) Spiegeleisen (revised) (Withdrawn) Sizes of metal strip, sheet brass (round square)flats and plate for structuraland general engineering purpose (Withdrawn)

35

11

IS 1181:1967

Qualifying tests for metal arc welders (engaged in welding structures other than pipes ) (first revision) [(Superseded by IS 7318(Part 1):1974]

36

19

IS 1279:1958

Electrically welded mild steel boilers and superheater tubes for design steam temperatuures not exceeding 155 degree centigrade or 850 degree centrigrade (Superseded by IS 1914)

37

2

IS 1338:1959

Specification for certified samples for metallurgical anal ysis (withdrawan)

38 39 40 41

9

IS 1339:1992 IS 1345:1960 IS 1357:1984 IS 1385:1968

Lead and lead alloys for sheathing of electric cables (third revision) Methods of chemical analysis of printing metal Printing type metal ingots (third revision) Phosphor bronze rods and bars, sheet and strip and wire (first revision) (Superseded by IS 7608:1987, IS 7811:1985 and IS 7814:1985)

42 43

32

IS 1413:1970 IS 1442:1964

Round vanaspati tins (first revision ) (Superseded by IS 10339:1988) Covered electrodes for metal arc welding of high tensile structural steel (revised) (Superseded by IS 814)

44

3

IS 1501(Part 1):1984

Part 1 HV 5 to HV 100 (second revision) (Superseding IS 1810:1961, IS 2866:1968and IS 9258:1979) (third revision)

45 46 47

3

IS 1501(Part 2):2005 IS 1501(Part 3):1987 IS 1521:1972

Part 2 HV 0.2 to less than HV 5 (second revision) Part 3 Less than HV 0.2 (second revision) Method for tensile testing of steel wire (first revision) (Superseded by IS 1608:1995)

48 49

6 6

IS 1538(Part 1):1976 IS 1538(Part 2):1976

General requirements (superseded by IS 1538:1993) Specific requirements for sockets and spigots of pipes (superseded by IS 1538:1993)

50

6

IS 1538(Part 3):1976

Specific requirements for sockets of fittings (superseded by IS 1538:1993)

51

6

IS 1538(Part 4):1976

Specific requirements for flanges of pipes and fittings (superseded by IS 1538:1993)

52

6

IS 1538(Part 5):1976

Specific requirements for raised flanges (Superseded by IS 1538:1993)

53

6

IS 1538(Part 6):1976

Specific requirements for standard flange drilling of flanged pipes and fittings (Superseded by IS 1538:1993)

54

6

IS 1538(Part 7):1976

Specific requirements for flanged sockets (superseded by IS 1538:1993)

55

6

IS 1538(Part 8):1976

Specific requirments for flanged spigots (superseded by IS 1538:1993)

5

9 9 8

11

3 3

109


56 57

6

Title

6

IS 1538(Part 9):1976 IS 1538(Part 10):1976

Specific requirements for collars (superseded by IS 1538:1993) Specific requirements for double socket bends (superseded by IS 1538:1993)

58

6

IS 1538(Part 11):1976

Specific requirements for tees,all sockets (superseded by IS 1538:1993)

59

6

IS 1538(Part 12):1976

Specific requirements for double socket tee with flanged branch (superseded byIS 1538:1993)

60

6

IS 1538(Part 13):1976

Specific requirements for crosses, all sockets (superseded by IS 1538:1993)

61

6

IS 1538(Part 14):1984

Specific requirements for double socket tapers (third revision) (superseded byIS 1538:1993)

62 63 64

6 6

IS 1538(Part 15):1976 IS 1538(Part 16):1976 IS 1538(Part 17):1976

Specific requirements for caps (superseded by IS 1538:1993) Specific requirements for plugs (superseded by IS 1593:1993) Specific requirements for bell mouth pieces (superseded by IS 1538:1993)

65

6

IS 1538(Part 18):1976

Specific requirements for double flanged bends (superseded by IS 1538:1993)

66

6

IS 1538(Part 19):1976

Specific requirements for all flanged tees (superseded by IS 1538:1993)

67

6

IS 1538(Part 20):1976

Specific requirements for all flanged crosses (superseded by IS 1538:1993)

68

6

IS 1538(Part 21):1976

Specific requirements for double flanged tapers (superseded by IS 1538:1993)

69

6

IS 1538(Part 22):1976

Specific requirements for split puddle or body flanges (superseded by IS 1538:1993)

70

6

IS 1538(Part 23):1976

Specific requirements for blank flanges (superseded by IS 1538:1993)

71

6

IS 1538(Part 24):1984

Specific requirements for all flanged radial tees (second revision) (superseded by IS 1538:1993)

72

2

IS 1546:1960

Method for determination of arsenic in iron and steel (Withdrawn) (see IS 228(Part 13):1982

73

32

IS 1549:1960

Steel drums and kegs (galvanized and ungalvanized) (Withdrawn) (see IS 2552 :1989)

74

8

IS 1550:1967

Copper sheet and strip for utensils and for general purposes (first revision) (Superseded by IS 14811:2000)

75 76 77 78 79

16

3

IS 1570:1961 IS 1660(Part 2):1972 IS 1660(Part 3):1972 IS 1660(Part 4):1977 IS 1663:1972

Schedules for wrought steels for general engineering purposes Cookery colanders [incorporated as IS 1660 (Part 1)] Pans patty (jelly mould) for baking [incorporated in IS 1660(Part 1)] General requirements [incorporated in IS 1660(Part 1)] Method for tensile testing of steel sheet and strri of thickness 0.5 mm to 3 mm(first revision) (Superseded by IS 1608:1995)

80

3

IS 1692:1974

Method for simple bend testing of steel sheet and strip less than 3 mm thick (first revision) (Superseded by IS 1599:1983)

81 82 83

3

IS 1754(Part 1):1986 IS 1754(Part 2):1986 IS 1756:1974

Part I HV 0.2 to HV 100 (third revision) Part 2 Less than HV 0.2 (second revision) Methods of modified arichsen cupping test for steel sheet and strip (first revision ) (Superseded by IS 10175:1982)

6

31 31 31

3 3

110


Title

84

29

IS 1760:1962

Methods of chemical analysis of limestone,dolomite and allied materials (withdrawn)

85

32

IS 1783(Part 3):1983

Drums, large, fixed ends, Grade C drums (second revision) (Withdrawn)

86

3

IS 1789:1961

Method for Brinell hardness test for grey cast iron (Superseded by IS 1500:1983)

87

3

IS 1790:1961

Method for brinell hardness test for light metals and their alloys (Superseded by IS 1500:1983)

88

3

IS 1810:1961

Method for Vickers hardness test for light metals and their alloys (superseded by IS 1501:1984)

89

3

IS 1816:1979

Method for tensile test for light metals and their alloys (first revision) (Superseded by IS 1608:1995)

90

7

IS 1841:1978

EC grade aluminium rod produced by rolling (second revision) (Withdrawn)

91

7

IS 1847:1961

99.7 percent primary aluminium notched bars and ingots for remelting for aircraft purposes (Superseded by IS 23:1980)

92

3

IS 1894:1972

Method for tensile testing of steel tubes (first revision) (Superseded by IS 1608:1995)

93 94 95

19

IS 1914(Part 1-4):1982 IS 1917:1962 IS 1972:1989

Carbon steel boilers tubes and superheater tubes (second revision) Method of chemical anlaysis of quartizite and high silica sand Copper plate, sheet and strip for industrial purposes (second revision) (Superseded by IS 14811:2000)

96 97 98 99

4

15

IS 1977:1996 IS 2000:1962 IS 2040:1962 IS 2045:1962

Low tensile structural steels (third revision) Method of chemical analysis of bauxite Steel bars for stays (Withdrawn) (see IS 1990:1973) Natural sillimanite blocks for glass melting tanks furnaces (Withdrawn)

100

4

IS 2073:1970

Specification for carbon steel black bars for production of machined parts forgeneral engineering purposes (first revision) (Withdrawn) (see IS 7283:1974)

101

3

IS 2078:1979

Method for tensile testing of grey cast iron (first revision) (Superseded by IS1608:1995)

102 103 104

6

IS 2107:1977 IS 2108:1977 IS 2278:1963

Whiteheart malleable iron castings (Superseded by IS 14329:1995) Blackheart malleable iron castings (Superseded by IS 14329:1995) Fine gold bar, sheet, wire, granules and token (LAGDI or MOHUR) (Withdrawn) Phosphor copper ingot (Withdrawn) Method for drift expanding test on copper and copper alloy tubes (Superseded byIS 2335:1985)

13 8

13 4

6 10

105 106

8 3

IS 2313:1963 IS 2348:1963

107

8

IS 2371:1973

Solid drawn copper alloy tubes for condensers, evaporators, heaters and cooler tubes using saline hard water (Withdrawn) (Superseded by IS 1545:1982)

108 109 110 111

8

IS 2456:1963 IS 2484:1979 IS 2517:1963 IS 2598:1966

Brass strip for pen nibs (withdrawn) Dimensions for steel tubes for bicycle purposes (withdrawn) Bright bars for threaded components (Withdrawn) Safety code for industrial radiographic practice

19 4 21

111


Title

112

9

IS 2600:1964

Methods of chemical analysis of high purity zinc and zinc base alloys for die casting (Withdrawn)

113 114

6 3

IS 2640:1977 IS 2654:1977

Pearlitic malleable iron castings (superseded by IS 114329:1995) Method for tensile testing of copper and copper alloys (first revision) (Superseded by IS 1608:1995)

115

3

IS 2655:1964

Method for tensile testing of copper and copper alloy tubes (Superseded by IS 1608:1995)

116

3

IS 2656:1964

Method for tensile testing of copper and copper alloy wires (Superseded by IS 1608:1995)

117

3

IS 2657:1964

Method for tensile testing of aluminium and aluminium alloy tube (Superseded byIS 1608:1995)

118

3

IS 2658:1964

Method for tensile testing for aluminium and aluminium alloy wire (Superseded by IS 1608:1995)

119

11

IS 2680:1964

Filler rods and wire for inert gas tungsten arc welding (Withdrawn) (see IS 5856,,IS 5897, IS 6419 and IS 6560)

120

22

IS 2756:1965

Method for estimating the average grain size of wrought copper and copper base alloys (Withdrawn) (see IS 4748)

121 122

6 6

IS 2841:1978 IS 2842:1980

Pig iron for special purposes (Superseded by IS 13502:1992) Basic pig iron for steel making purposes (Superseded by IS 13502:1992)

123

22

IS 2853:1964

Methods of determining austenitic grain size in steel (Superseded by IS 4748)

124

3

IS 2866:1968

Method for vickers hardness test for copper and copper alloys (Superseded by IS1501(Pt 1):1984)

125

20

IS 2983:1971

Recommended practice for hot tinning of brassware (first revision) (Withdrawn)

126 127

14

IS 3021:1975 IS 3054:1965

Bentonite for use in foundries (Withdrawn) (see IS 12446:1988) Method for Brinell hardness test for copper and copper alloys (Superseded by IS 1500:1983)

128 129

8 29

IS 3057:1965 IS 3200(Part 3):1991

Copper sheets for photo process engravings Part 3 Determination of total aluminium by ccomplexometric method (first revision)

130

29

IS 3200(Part 8):1992

Part 8 Determination of phosphorus pentroxide and silica (first revision)

131

3

IS 3260:1965

Method for bend test for copper and copper alloys (Superseded by IS 1599:1975)

132

8

IS 3285:1965

Copper strip for electrical purposes withdrawn or rolled edged (above 150 mm width) (withdrawn) (Superseded by IS 1897:1983)

133

8

IS 3332:1965

Nickel silver strip and foil for telecommunication purposes (Withdrawn) (Superseded by IS 2283:1981)

134

3

IS 3388:1965

Method for wrapping test for copper and copper alloy wire (Superseded by IS 1755:1983)

135

3

IS 3408:1965

Method for non-interrupted creep testing of steel at elevated temperature (Superseded by IS 3407(Part 1):1983

136

3

IS 3409:1965

Method for creep stress rupture testing of steel of elevated temperature [Superseded by IS 3407 (Part 2):1983]

137

4

IS 3422:1966

Code of practice for packaging of steel and steel products for export purposes (withdrawn)

3

112


Title

138

7

IS 3435:1968

99 Percent secondary aluminium notched bars and ingots for remelting for aircraft purposes (Withdrawn)

139 140

6 8

IS 3486:1966 IS 3487:1994

Cast iron spigot and socket drain pipes (Withdrawn) Copper-Cold rolled strip and foil for gaskets, washers and eyelets (first revision) (Superseded by IS 14811 :2000)

141

8

IS 3488:1980

Brass bars, rods and sections suitable for forging (first revision) (Supersededby IS 6912)

142

4

IS 3503:1966

Steel for marine boilers, pressure vessels and welded machinery structures (withdrawn)

143

10

IS 3541:1981

Code of practice for manufacturers of 23.3 and lowe carat gold alloys (first revision) (Superseded by IS 2740:1999)

144 145 146 147 148

19

4

IS 3609:1966 IS 3666:1966 IS 3684:1966 IS 3695:1966 IS 3747:1982

Chrome molybdenum steel, seamless, boiler and superheater tubes Tests for foundry core oils (Superseded by IS 9009:1992) Metals for casting moveable types (Withdrawn) Thick bottom aluminium utensils (Redesignated as IS 1660 Part VI) Hot rolled steel plates and sheets for flanging and pressing (first revision) (Superseded by IS 5986:1992)

149

16

IS 3749:1978

Tool and die steels for cold work (first revision) (Superseded by IS 3748:1990)

150

3

IS 3754:1988

Method for calibration of standardized blocks to be used for Rockwell hardness testing machines(Scales A-B-C-D-E-F-G-H-K) (first revision) ( Superseded by IS 1586 :2000)

151

3

IS 3804:1988

Method for calibration of Rockwell hardness testing machines (Scales A-B-C-D-E-F-G-H-K)(first revision) (Superseded by IS 1586 :2000)

152

4

IS 3835:1966

Aluminized steel core wire for aluminium conductors (ACSR) (withdrawn)

153 154 155

4

IS 3945:1966 IS 3981:1967 IS 4030:1973

Steel for naval purposes (withdrawn) Sigries (Withdrawn) Cold rolled carbon steel strip for general engineering purposes (first revision) (Superseded by IS 513:1986)

IS 4077:1967 IS 4136:1967

Copper-nickel shot (Withdrawn) (Superseded by IS 5743:1970) Aluminium Compartmental trays (Superseded by IS 1660(Part 6):1980) Limestone for use in foundries (first revision) Method for wrapping test of aluminium and aluminium alloy wire (Superseded by IS 1717:1985)

156 157

14 6 31

31 4 8 31

158 159

14 3

IS 4140:1978 IS 4168:1967

160

3

IS 4176:1967

Method for simple torsion test of aluiminum and aluminium alloy wire (Superseded by IS 1717:1985)

161

3

IS 4177:1967

Method for flattening test of aluminium and aluminium alloy tubes (Superseded by IS 2328:1983)

162 163

19 14

IS 4310:1967 IS 4331(Part 1):1980

Weldable steel pipe fittings for marine purposes Comparison of Indian and overseas standards for steel castings Part 1 Steel castings for general engineering purposes (first revision)(Withdrawn)

164

18

IS 4369:1967

Steel bars for forgings (Withdrawn) (Superseded by IS 1875:1992)

113


Title

165

14

IS 4476:1975

Crane-suspended hand-operated geared ladles for steel foundries (first revision)(Superseded by IS 4475(Pt 1 - 4)

166 167

19 3

IS 4516:1968 IS 4598:1968

Elliptical mild steel tubes Method for simple bend test for aluminium and aluminium alloy sheet and strip of thickness betweenn 0.2 mm and 7 mm (Superseded by IS 1599:1985)

168

3

IS 4599:1968

Method for drift expanding test on aluminium and aluminium alloy tubes (Superseded by IS 2335:1985)

169

3

IS 4713:1968

Method for determination off lower yield stress, proof stress and proving test ffor steel at elevated temperatures (Superseded by IS 1608:1995)

170 171

31

IS 4823:1981 IS 4855:1968

Brass table utensils (first revision) (Withdrawn) Bright steel bars for machining (Withdrawn) (Superseded by IS 7270:1974 and IS7271:1974)

172 173 174 175 176

18

6

IS 4901:1968 IS 4922:1968 IS 4944:1968 IS 5020:1969 IS 5021:1969

Code of practice forgings (Withdrawn) (Superseded by IS 7743) Seamless steel tubes (suitable for welding) for aircraft purposes Code of practice for welding at low ambient temperature (withdrawn) Hematite pig iron (Withdrawn) (Superseded by IS 13502:1992) Acid-resisting high-silica pig iron (withdrawn) (Superseded by IS 13502:1992)

177

3

IS 5071:1969

Method for flattening test for copper and copper alloy tubes of circular section (Superseded by IS 2328:1983)

178

3

IS 5072:1988

Methods for Rockwell superficial hardness test (Scales 15N, 30N, 45N, 15T, 30Tand 45T) (first revision) (Superseded by IS 1586 :2000)

179

3

IS 5073:1988

Method for verification of Rockwell superficial hardness testing machines (Scales 15N,30N,45N, 15T,30T and 45T) (first revision) (Superseded by IS 1586 :2000)

180

3

IS 5076:1988

Method for calibration of standardized blocks to be used for rockwell superficial hardness testing machines (Scales 15N,30N,45N,15T,30T and 45T) (first revision) (Superseded by IS 1586 :2000)

181 182

31

IS 5136:1981 IS 5239:1969

Brass serving utensils (first revision) (Withdrawn) Wire rod for the manufacture of aluminized steel core wire for aluminium conductors (withdrawn)

183 184

24 4

IS 5243:1969 IS 5272:1969

Tin coated finish for cooking utensils (Withdrawn) Carbon steel sheets for integral coaches (Superseded by IS 5986:1992)

185

24

IS 5274:1969

Recommended practice for hot dip tinning of plain carbon steels (Withdrawn)

186 187

10 24

IS 5320:1969 IS 5358:1969

Fine silver ingot (Withdrawn) (see IS 2229) Hot dip galvanized coatings on fasteners (Superseded by IS 1367(Part 13):1982

188

11

IS 5462:1969

Colour code for identification of covered electrodes and metal arc welding (Withdrawn)

189

13

IS 5483:1969

Method for determination of specific gravity of iron ores, pellets and sinters (Superseded by IS 11896:1986)

4

19 12 6

4

114


Title

190

8

IS 5494:1969

Leaded brass sheets and strips for use in manufacture of tubewell strainers (withdrawn)

191 192 193

3 31 13

IS 5619:1970 IS 5765:1970 IS 5843:1970

Recommendations for fatigue testing of metals_(withdrawn) Box,lunch, aluminium [Redesignated as IS 1660(Part VII)] Method of measuring the bulk density of iron ore and iron ore agglomerates including sinters in a large container (applicable for size over 40mm) (Superseded by IS 5842:1986)

194

7

IS 5902:1970

Aluminium and aluminium alloy rivet stock for cold forged rivets for aircraft purposes (Withdrawn) (see IS 8513:1977,IS 8514:1977,IS 8515:1977,IS 8936:1978,IS 8937:1978 and IS 8938:1978)

195

7

IS 5909:1970

Aluminium and aluminium manganese alloy sheet and strip for aircraft purposes (Withdrawn) (Superseded IS 7882:1975 and IS 7883:1975)

196

19

IS 5929:1970

Inspection and testing procedure for circular steel tubes for aircraft purposes

197

4

IS 5993:1970

Aluminized steel wire for telegraph and telephone purposes (withdrawn)

198

2

IS 6010:1971

Recommended practice for photographic processing in spectrochemical analysis (withdrawan)

199 200

19 32

IS 6011:1970 IS 6093:1971

Carbon steel tubes for use on board ships for pressure services Methods of determining the capacity and dimensions of hermetically sealed metalfoodcontainers (superseded by IS 12219-1987)

201

11

IS 6227:1971

Code of practice for use of metal arc welding in tubular structure (Superseded by IS 9595)

202

3

IS 6253:1971

Method for simple torsion testing of copper and copper alloy wire (Superseded by IS 1717:1985)

203

8

IS 6517(Part 1):1972

Methods of chemical analysis of copper master alloys (Pt 1) Determination of copper nickel alloy

204

3

IS 6520:1972

Method for the determination of K-values of a tensile testing system_(withdrawn)

205

3

IS 6878:1973

Method of reverse bend testing of copper and copper alloy wire (Superseded by IS 1716:1985)

206

4

IS 6914:1978

Cast billets ingots and continuously cast billets for rolling into structural steel(standard quality) (first revision) (Superseded by IS 2830:1992)

207

4

IS 6915:

Cast billet ingots and continuously cast billets for rolling into structural steel: ordinary quality (first revision) (Superseded by IS 2831)

208

32

IS 7024:1973

Ghee and edible oil tins (round and square) (Superseded by IS 10339:1988)

209

7

IS 7094:1984

Aluminium and aluminium alloy welded tube for general engineering purposes (first revision) (withdrawn)

210

4

IS 7270:1974

Bright bars (standard quality) (Withdrawn) (Superseded by IS 9550:1980)

211

4

IS 7271:1974

Bright bars (ordinary/commerical quality) (withdrawn) (Superseded by IS 9550)

212

21

IS 7281:1974

Code of practice for immersed ultrasonic testing by the reflection method usingpulse longitudinal waves (Withdrawn) (Superseded by IS 3664)

115


Title

213

4

IS 8051:1976

Steel ingots and billets for the production of volute, helical and laminated springs for automotive suspension

214

4

IS 8053:1976

Steel ingots and billets for the production of steel wire for the manufacture of wood screws

215

4

IS 8054:1976

Steel ingots and billets for productionjof laminated springs (railway rolling stock) (superseded by IS 8052:1990)

216 217

4 4

IS 8055:1976 IS 8056:1976

Steel ingots and billets for the production of spring washers Steel ingots and billets for the production of hard drawn steel wire for upholstry springs

218

4

IS 8057:1976

Steel ingots and billets for the production of wire rod for the manufacture of machine screws (by cold heading process)

219

3

IS 8285:1976

Method for tensile test of copper and copper alloy rolled flat product (thickness less than 2.5 mm) (Superseded by IS 1608:1995)

220

4

IS 8500:1991

Structural steel - microalloyed (medium and hi gh strength qualities) (first revision)

221

10

IS 8844:1978

Guidelines for marking purity of gold on gold articles/ornaments (Superseded byIS 1417:1999)

222

4

IS 9025:1993

Single cold reduced tinplate and single cold reduced black plate electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form (first revision)

223

3

IS 9258:1979

Method for vickers micro-hardness testing of metals [(Superseded by IS 1501(Part 3:1984)]

224

21

IS 9346:1979

Recommended practice for certification of NDT personnel for ultrasonic examination (Superseded by IS 13805:1993)

225

4

IS 9467:1980

Steel ingots and billets for production of rivet bars for structural purposes

226

4

IS 9468:1980

Steel ingots and billets for production of mild steel rivet bars for ship building

227

4

IS 9477:1980

Steel ingots and billets for hot rolled bars for the production of bright bars

228 229

14 2

IS 9731:1980 IS 10113:1982

Steel castings for general engineering purposes (Withdrawn) Recommended practice for calibration of emulsion for photographic photometry (withdrawan)

230

25

IS 10441:1991

Mettalic powders- Determination of apparent density- oscillating funnel method (first revision) (Withdrawn)

231

3

IS 10588:1983

Tables of Brinell hardness values for use in test made on flat surfaces

232 233

8 4

IS 10723:1983 IS 10789:1984

Aluminium silicon bronze rods and bars Hot rolled micro alloyed steel plate sheet and strip for manufacturers of low liquifiable gas cylinders (Superseded by IS 6240:1999)

234

3

IS 10927(Part 1):1984

Tables of Vickers hardness values for use in tests made on flat surface Part 1 HV 5 to HV 100

235 236 237

3

IS 10927(Part 2):1984 IS 10927(Part 3):1991 IS 11040:1984

Part 2 HV 0.2 to less than 5 Part 3 Less than HV 0.2 Dimensions for wrought aluminium and aluminium alloys,welded tube (withdrawn)

238

32

IS 11258:1985

10- and 20 kg square tins for vanaspati ghee and edible oils (Withdrawn)

3 7

116


239 240 241 242

25

Title

4

IS 12216:1987 IS 12217:1987 IS 13954:1994 IS 13955:1994

Tantalum cavbide powder (withdrawn) Niobium carbide powder (withdrawn) Double cold-reduced electrolytic tinplate sheet Double cold reduced electrolytic tinplate coil for subsequent cutting into sheets

243

9

IS 13982:1994

Zinc Alloy for Hot Dip Coatings- Zinc-5 Percent Aluminium- Mischmetal Alloy- Specification

244

30

IS 14718:1999

Method for determination of impact index of HBI

25 4

117

ANNEX III

LIST OF INDIAN STANDARDS, NUMBERS AND VALID LICENCES COVERED UNDER CERTIFICATION AS ON 1 APRIL 2011 (Product wise Alphabetically ) Sl. IS No. Title of the Specification No. incences No. ________________________________________________________________________________________ Alloy Steels and Forgings Sectional Committee- MTD 16 1.

1875:1992

2.

2004: 1991

3. 4.

4432:1988 5517:1993

Carbon steel billets, blooms, slabs and bars for forgings Carbon steel forgings for general engineering purposes Case hardening steel Steels for hardening and tempering

5 1 1 1

Corrosion Protection and Finishes – MTD 24 5.

1337:1993

Electroplated coatings of hard chromium on iron and steel

1

Ferrous Castings: Cast Iron- MTD 6 6.

1536:2001

7.

1537:1976

8.

1538:1993

9.

1729:2002

10. 11.

1879:2010 3989:2009

12.

5531:1988

13.

7181:1986

14.

8329:2000

15.

8794:2002

16.

9523:2000

17.

13382:2004

18.

13502:1992

Pressure pipes for water gas and sewagecentrifugally cast (spun) iron pipes 12 Vertically cast iron pressure pipes for water, gas, 2 sewage Cast iron fittings for pressure pipes for water, 13 gas sewage Cast iron/ductile iron drainage pipes and pipe fittings 33 for over ground non pressure pipeline socket and spigot series Pipe fittings – Malleable cast iron 138 Centrifugally cast (spun) iron spigot and socket 12 soil, waste and ventilating pipes, fittings and accessories Cast iron specials for asbestos-cement 5 pressure pipes for water, gas and sewage Cast iron double flanged pipes for water, gas and 20 Sewage – Horizontally Centrifugally cast (spun) ductile iron pressure 13 pipes for water, gas and sewage Pipes (pressure)- cast iron detachable joints for 5 use with asbestos cement Ductile iron fittings for pressure pipes for water, gas 15 and sewage Cast iron specials for mechanical & push on flexible joints for pressure pipes lines for water, gas 1 and sewage Pig iron 1

118

Metal Containers – MTD 32 19. 20. 21. 22. 23 24. 25. 26. 27.

916:2000 Tins – 18 litre square 1783(Pt. 1) Drums, large, fixed ends – grade A drums 1993 1783(Pt. 2) Drums, large, fixed ends – grade B drums 1988 1784:1998 Closures (screwed) for drums 2552:1989 Drums (steel) (galvanized and ungalvanized) 3575:1993 Drums – Bitumen 9396(Pt. 1) Open top sanitary cans (round) for processed 1987 foods – Tinplate requirements 10325:2000 Square tins – 15 kg for ghee, vanaspati, edible oils and bakery shortenings 13997:1994 Drums, large open top

7 27 34 3 2 23 1 14 14

Non Ferrous Metals and Their Alloys: Copper and Copper Alloys – MTD 8 28.

410:1977

Copper alloys – brass – Cold rolled sheet, strip and foil Light Metals and their alloys, MTD 7

1

29.

1

21:1992

Wrought Alloys and its alloys – sheets and strip for utensils

Precious Metals – MTD 10 30.

1417:1999

31.

2112:2003

Gold and gold alloys – Jewellery artefacts – fineness and marking Grades of silver and silver alloys (first revison)

8155 464

Steel Tubes, Pipes and Fittings, MTD 19 32. 33. 34.

35. 36. 37. 38. 39. 40. 41. 42. 43. 44.

1161:1998 1239(Pt 1): :2004 1239(Pt 2): :1992

Structural purpose – steel tubes Mild Steel tubes, tubular and other wrought steel fittings Mild Steel tubes, tubular and other wrought steel fittings- Mild steel tubular and other wrought steel pipe fittings 1978:1982 Line pipes 3589:2001 Water, gas and sewage – steel pipes( 168.3 to 2032mm (OD) seamless or electrically welded 3601:2006 Steel tubes for mechanical and General Engineering purposes 4270:2001 Steel tubes used for water wells 4923:1997 Hollow steel sections for structural use 5504:1997 Spiral welded pipes 6392:1971 Steel pipe flanges 9295:1983 Idlers for belt conveyers – steel tubes 10577:1982 Lancing pipes 11722: 1986 Thin walled flexible quick coupling pipes

119

101 135 20

17 82 40 37 36 10 6 28 1 2

Steel Castings, MTD 14 45.

276:2000

Austenitic Manganese Steel Castings

1

Welding – MTD 11 46. 814:2004 47. 6901:1988 48. 7653:1975

Covered electrodes for manual metal arc welding of carbon and carbon manganese steels Pressure regulators for gas cylinders used in welding cutting and related processes Manual blow pipes for welding and cutting

142 9 8

Wrought Steel-MTD 4 49. 50. 51. 52. 53. 54. 55. 56. 57. 58.

59. 60. 61. 62. 63. 64. 65. 66.

67. 68. 69. 70. 71. 72. 73.

277:2003 280:2006 513:2008 648:2006

Galvanized steel sheets (plain and corrugated) 35 Mild steel wire for general engineering purposes 31 Cold rolled low carbon steel sheets and strips 11 Non oriented electrical steel sheets and strips 4 for magnetic circuits 1079:2009 Hot rolled carbon steel sheet and strip 9 1993:2006 Cold reduced electrolytic tinplate 3 2002:2009 Steel plates for pressure vessels for intermediate 7 and high temperature service including boiler 2041:2009 Steel plates for pressure vessels used at moderate and low 2 temperature 2062:2006 Steel for general structural purposes 278 2830:1992 Carbon steel cast billet ingots, billets,blooms and 307 and slabs for re-rolling into steel for general structural purposes 2831:2001 Carbon steel billets, blooms and slabs for re-rolling 60 into structural steel (ordinary quality) 2879:1998 Mild steel for metal arc welding electrode core wire 10 3502:1994 Steel chequered plates 2 3975:1999 Mild steel wires, formed wires and tapes for 27 armoring of cables 4454(Part 1) Steels wires for cold formed springs 1 2001 5872:1990 Cold rolled steel strips (box strapping) 2 5986:2002 Hot rolled steel plates, sheets, strips and flats 8 for flanging and forming operations 6240:2008 Hot rolled steel plate (upto 6 mm)sheet and strip 8 for manufacture of low pressure liquifiable gas cylinder 7283:1992 Hot rolled bars for production of bright bars and 1 mechanical parts for engineering purposes 7887:1992 Mild steel wire rods for general engineering 15 purposes 10748:2004 Hot rolled steel strips for welded tubes and pipes 20 11513:1985 Hot rolled carbon steel strip for cold rolling purposes 7 14650:1999 Carbon steel cast billet, ingots, billet, blooms & 23 slabs for re-rolling purpose 15391:2003 Cold rolled non-oriented electrical steel and strip 3 Delivered I semi-processed state 15647:2006 Hot rolled steel narrow strip for welded tubes & pipes 2 120

ANNEX IV ISO TECHNICAL COMMITTEES DEALT BY METALLURGICAL ENGINEERING DEPARTMENT ISO TC

5

17

TITLE

INDIA’S MEMBER

FERROUS METAL PIPES AND METALLIC FITTINGS

BODY STATUS P

SC 1 Steel Tubes SC 2 Cast Iron Pipes, Fittings and Their Joints SC 10 Metallic flanges and their joints

P P O

STEEL

P

SC 1 SC 3 SC 4 SC 7 SC 9 SC 10 SC 11 SC 12 SC 16 SC 17 SC 19

Methods of determination of chemical composition Steel for Structural Purposes Heat Treatable and Alloy Steel Method of Testing (Other than Mechanical Tests And Chemical Analysis) Tinplate and blackplate Steel for Pressure Purposes Steel Castings Continuous Mill Flat Products Steels for Reinforcement and Pre Stressing of concrete Steel Wire Rod and Wire Products Technical Delivery Condition for Steel Tubes For Pressure Purposes

O P O

P P P P O P P

18

ZINC AND ZINC ALLOYS

O

25

CAST IRON AND PIG IRON

P

SC 1 SC 2

P

SC 3

Malleable Cast Iron Spheroidal Graphite, ferritic-perlitic and austenitic cast Iron Grey Cast Iron (revision ISO/R 185

P P

26

COPPER AND COPPER ALLOYS

O

33

REFRACTORIES

P

44

WELDING AND ALLIED PROCESSES

O

SC 3 SC 5 SC 6 SC 7 SC 8 SC 10

Welding consumables Testing and Inspection of Welds Resistance welding Representation and terms Equipment for gas welding, cutting and allied processes Unification of Requirements in the Field of Metal Welding SC 12 Soldering and brazing materials

121

O P P O O O O

52

67

LIGHT GAUGE METAL CONTAINERS

O

SC 4 SC 5 SC 6

O O O

P MATERIAL, EQUIPMENT AND OFFSHORE STRUCTURES FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES SC 2 SC 5

79

102

Open top containers General use containters Aerosol containers

Pipeline transportation system Casing tubing & drill pipe

P P

LIGHT METALS AND THEIR ALLOYS

O

SC 1 SC 4 SC 5 SC 6 SC 7 SC 9 SC 11

O O O P O O O

Methods of chemical and spectro-chemical analysis Unalloyed (refined) aluminium ingots Magnesium and alloys of cast or wrought magnesium Wrought aluminium and aluminium alloys Aluminium and cast aluminium alloys Symbolization Titanium

IRON ORES SC 1 SC 2 SC 3

P

Sampling Chemical Analysis Physical Testing

P P P

107

METALLIC AND OTHER INORGANIC COATINGS

O

119

POWDER METALLURGY`

P

129

ALUMINIUM ORES

O

132

FERRO ALLOYS

P

135

NON-DESTRUCTIVE TESTING

P

SC 2 Surface method SC 3 Acoustical method SC 4 Eddy current methods SC 5 Radiaton methods SC 6 Leak detection methods SC 7 Personnel qualification SC 8 Infrared thermography for NDT SC 9 Acoustic emission testing

P P P P P P P P

155

NICKEL AND NICKEL ALLOYS

O

156

CORROSION OF METALS AND ALLOYS

O

122

164

MECHANICAL TESTING OF METALS

O

SC 1 Uniaxial testing SC 3 Hardness testing Sc 4 Toughness testing – Fracture (F), Pendulum (P), Tear (T)

P P P

174

JEWELLERY

P

175

FLUORSPAR

O

183

COPPER LEAD AND ZINC ORES AND CONCENTRATE

O

196

ORNAMENTAL ROCKS

O

201

SURFEROUS CHEMICAL ANALYSIS

O

202

MICROBEAN ANALYSIS

O

229

NANOTECHNOLOGIES

P

123

ANNEX-V IS 21 :1992 IS 279 :1981 IS 1148 :1982 IS 1149 :1982 IS 1417 :2009 IS 4368 :1967 IS 4430:1979 IS 4431 :1978 IS 4432 :1988 IS 4882 :1979 IS 5489 :1975

बतरन के नमारण के लए पटवॉं ऐ युमनयम मौधातुऍ ं (चथा पुनण ) ता औ टेलीफोन काय के लये जः तीकृत इः पात के ता (तीसा पुनण ) संचना काय के लए त त बेलत इः पात िवेट िसये 40 ममी तक संचना काय के लए उ च तनन इः पात िवेट िसये ः वणर एवं ः वणर मौधातुऍ ं आभषण /श पका शुता एवं मुहाकं न – वश (तीसा पुनण ) सामा य इंजीनियंग काय क गढाईय के लए मौ इः पात वलेट  लम  औ सलयॉं सांचा इः पात (पहला पुनण ) काबरन औ काबरन - मैगनीज – सुकय इः पात (पहला पुनण ) केा कठोता इः पात (पहला पुनण ) बेियंग उधोग म ूयु त िवेट के लये अ प काबरन इः पात ता (पहला पुनण ) बेियंग उधोग म ूयु त काबरन इः पात (पहला पुनण )

दभाषी भातीय मानक 1110 : 1990 12908: 1990

फेोसलकॉन (चथा पुनण ) फेोए युमनयम

124

FOREWORD This programme of work is prepared by all Standards formulating departments of Bureau of Indian Standards to indicate the latest position standards and draft standards at different stages of processing. It is prepared Sectional Committee wise and arranged in the sequential order of the Committee Number. This document covers the programme of work of Metallurgical Engineering Division Council (MTDC) with its scope as under:

`Standardization in the field of metallurgy and metallurgical engineering including ferrous and nonferrous metals, alloys and their products, ores and minerals, foundry, refractories, powder metallurgy, heat treatment, corrosion protection, metallic and non-metallic coating (excluding paints, pigments and enameling) and welding (excluding electrical welding equipment) and Nanomaterials and technologies’ This document covers designation of the Sectional Committee, its Scope, Number and title of the published/draft standards, date of reaffirmation, number of Amendments issued, new items on programme etc. An `*’ before IS No. has been used to indicate that the standard is under revision and `**’ has been used to indicate standards to be taken up for revision. Below a published standard wherever `ISO..’ standard number is given, it implies that the Indian Standard given above is under dual number system with the relevant ISO standard. Further to facilitate tracking on the data base, national number in 9000 series have been used for new items on programme. This should not be confused with document number. List of Indian Standard with dual numbers (adopted ISO standards) is given in Annex I. A list of withdrawn/superseded standards relating to this Division is given in Annex II. The list of licences relating to MTDC standard is given in Annex III. The list of ISO TC where MTD is a participating member (P member) is given in Annex IV. The list of Indian Standards published in Hindi/Billingual is given in Annex V. In adoption, the department has published the followings special Publications: SP SP 1:1967 SP 6(7):1972 SP 12:1975 SP 14:1976 SP 17:1979 SP 37(Pt 3):1987

Handbook of manual metal-arc welding for welders Comparison of Indian and overseas standards on aluminium alloy castings Simple welded girders ISI Handbook for gas welders Index to steel designation Index to IS 1956 Glossary of terms relating to iron and steel Handbook for refractories : Pt 3 Refractories for cement kiln system

It is hoped that this publication will provide the user community a convenient tool for obtaining the latest information about new and upcoming standards in the field of Metal and Metallurgy. For any other clarification, please write to: Sc `F’ & Head, Metallurgical Engineering Department, Bureau of Indian Standards, 9 Bahadur Shah Zafar Marg, New Delhi 110 002 Email: [email protected] Fax: 011-23231085 Phone: 011 - 23231085

125

STATISTICS AT A GLANCE (As on 1 April 2011)

Aspect Product Standards Methods of Test Code of Practices Terminology Dimensions Symbols Others Total

No. of Standards 653 362 148 39 30 01 382 1615

126

CONTENTS COMMITTEE WISE PROGRAMME OF WORK OF METALLURGICAL ENGINEERING DEPARTMENT Sl.No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34.

Sectional Committee MTD 1 General Metallurgical Standards (Disbanded)………………….. MTD 2 Methods of Chemical Analysis of Ferrous Metals (Disbanded) MTD 3 Mechanical Testing of Metals……………………………………. MTD 4 Wrought Steel Products………………………………………….. MTD 5 Ferro Alloys………………………………………………………… MTD 6 Pig Iron and Cast Iron…………………………………………….. MTD 7 Light Metals and Their Alloys…………………………………….. MTD 8 Copper and Copper Alloys ………………………………………. MTD 9 Lead, Zinc, Cadmium, Tin, Antimony and Their Alloys……….. MTD 10 Precious Metals …………………………………………………… MTD 11 Welding General ………………………………………………….. MTD 12 Welding Applications……………………………………………… MTD 13 Ores and Raw Materials…………………………………………. MTD 14 Foundry and Steel Casting Sectional Committee ………. MTD 15 Refractories……………………………………………………….. MTD 16 Alloy Steels and Forgings……………………………………….. MTD 17 Steel Castings (merged with MTD 14)………………………… MTD 19 Steel Tubes, Pipes and Fittings………………………………… MTD 21 Non-Destructive Testing………………………………………… MTD 22 Metallography and Heat Treatment……………………………. MTD 24 Corrosion Protection and Finishes (merged with MTD 20)……. MTD 25 Powder Metallurgical Materials and Products…………………… MTD 26 Industrial Fuel Fired Furnaces ……………………………………. MTD 27 Special Metals and Alloys (Disbanded) ………………………….. MTD 28 Methods of Chemical Analysis of Non-Ferrous Metals (Disbanded) MTD 29 Methods of Chemical Analysis of Ores, Minerals and Allied Materials for Metallurgical Industry (merged with MTD 13)…… MTD 30 Sponge Iron and Smelting Reduction ……………………………… MTD 32 Metal Containers……………………………………………………… MTD 33 Nanotechnologies Sectional Committee MTD 34 Methods of Chemical Analysis Sectional Committee……. List of Indian Standards Under Dual Number System (Annex I)……………… List of Indian Standards Withdrawn/Superseded (Annex II)………………….. List of Licences Relating to Indian Standards of MTDC (Annex III)………….. List of ISO TC where MTD is participating member (P member) is given….… in Annex IV Indian Standards Published in Hindi/Billingual Indian Standards (Annex V)…..

127

Page

1 6 13 15 19 24 29 31 35 39 42 46 53 58 64 67 71 74 81 85

86 88 91 92 103 108 118 121 124

Is Standard Detail

Recommend Documents