IMPORTANT NOTICE, READ BEFORE USE
Source Doc. No: Rev. No. & Date
400-iPASO116-01 / Mar 2011
Software key
As this document contains information necessary for NEC's internal document management such as revision numbers, revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers. customers. However, necessary information without the internal references can be extracted and included in documents presented to the customer.
CONFIDENTIAL
SOFTWARE KEY iPASO-400 General Software key is a powerful, yet ye t easy-to-use multi-dimensional equipment management tool that could facilitate the customer’s requirement for capacity and configuration expansion or upgrades. The iPASOLINK hardware support all ca pacities and configurations. Initially customer can acquire the capacity and redundancy configuration required for the current traffic requirements to keep the cost down. When the traffic requirement requirement expand or grows, additional capacities can be enabled by acquiring a software key.
To facilitate the customer requirements of larger traffic needs, software key is a powerful, yet easy-to-use multi-dimensional equipment management tool to upgrade iPASOLINK 400.
1. KEY FEATURES AND BENEFITS 1.1 Upgradable by Software Key Upgrading the equipment can be done easily by installing the software key. 1.2 Product Cost Down The software key function is a very cost effective feature that allows the customer to upgrade the system configuration. 1.3 Upgrading Whenever Needed When traffic volume increases, you may need to increase the capacity. iPASOLINK 400 can be upgraded by software key(s) whenever needed. 1.4 Flexible Software Key Selection Select the software key depending on what needs to be upgraded/changed in your equipment.
2. SOFTWARE KEY TYPES Software key is classified into two types: Initial Key Initial Key is installed into the equipment at the NEC factory before shipment. Upgrade Key Upgrade key is installed into iPASOLINK 400 e quipment. Upgrade key is defined and made effective by a combination of two param The “Parameter After Change” is regarded as “Parameter Before Change” eters: Upgrade Key Item Name: “Parameter Before Change” to “Parameter After change” Example:
IMPORTANT NOTICE, READ BEFORE USE
Source Doc. No: Rev. No. & Date
400-iPASO116-01 / Mar 2011
Software key
As this document contains information necessary for NEC's internal document management such as revision numbers, revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers. However, necessary information without the internal references can be extracted and included in documents presented to the customer.
CONFIDENTIAL
Radio capacity-1: 10MB to 100MB
in the next upgrade process. Please refer to the following tables for initial/upgrade key va riations.
System & Radio Key No. 1
Key Item Radio Redundancy
2
3
ETH Traffic Aggregation @N+0 Radio Radio BITRATE
4
XPIC Function
5
NEO ODU Compatibility
Initial Key 1+0 1+1 (1 pair) 1+1 (2 pair) OFF
Key Configuration Default
Upgrade Key-1 1+0 to 1+1 (1 pair) 1+1 (1 pair) to 1+1 (2 pair)
Upgrade Key-2 1+0 to 1+1 (2 pair)
Default
OFF to ON
Default
FIXED to FREE FREE to AMR
FIXED to AMR
Default
OFF to XPIC 1P XPIC 1P to XPIC 2P
OFF to XPIC 2P
Default
OFF to ON
ON FIXED FREE AMR OFF XPIC 1P XPIC 2P OFF ON
Summary of the required soft-keys for radio system configuration
Radio Redundancy Radio Capacity XPIC Function
N+0
N-way
1+1
1+0 N key OFF
1+0 N key OFF
1+1 1P 1 key OFF
Configuration 2x(1+1) 1+0 XPIC 1+1 2P 2 key OFF
1+0 2 key XPIC 2P
2x (1+0 XPIC) 1+0 4 key XPIC 2P
1+1 XPIC 1+1 1P 2 key XPIC 1P
IMPORTANT NOTICE, READ BEFORE USE
Source Doc. No: Rev. No. & Date
400-iPASO116-01 / Mar 2011
Software key
As this document contains information necessary for NEC's internal document management such as revision numbers, revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers. However, necessary information without the internal references can be extracted and included in documents presented to the customer.
CONFIDENTIAL
Radio Capacity Key Key Item Radio Capacity
Initial Key 10MB 20MB 50MB 100MB 150MB 200MB 300MB
Key Config Default
Upgrade Key-1 10MB to 20MB 20MB to 50MB 50MB to 100MB 100MB to 150MB 150MB to 200MB 200MB to 300MB 300MB to 400MB
Upgrade Key-2 10MB to 50MB 20MB to 100MB 50MB to 150MB 100MB to 200MB 150MB to 300MB 200MB to 400MB
Upgrade Key-3 10MB to 100MB 20MB to 150MB 50MB to 200MB 100MB to 300MB 150MB to 400MB
Upgrade Key-4 10MB to 150MB 20MB to 200MB 50MB to 300MB 100MB to 400MB
Upgrade Key-5 10MB to 200MB 20MB to 300MB 50MB to 400MB
Upgrade Key-6 10MB to 300MB 20MB to 400MB
Upgrade Key-7 10MB to 400MB
400MB
The relation among Channel Spacing , Modulation Rate and Traffic rate are described as bellow.
IMPORTANT NOTICE, READ BEFORE USE
Source Doc. No: Rev. No. & Date
400-iPASO116-01 / Mar 2011
Software key
As this document contains information necessary for NEC's internal document management such as revision numbers, revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers. However, necessary information without the internal references can be extracted and included in documents presented to the customer.
CONFIDENTIAL
ETH & TDM Key No.
Key Item
1
RJ45 Port Usage in Main Board (2xFE or 2xGbE)
2
8
SFP Port Usage in Main Board SFP Port Usage per optional GbE card Additional VLAN Table LAG/LACP for Ethernet Line *1 Ethernet OAM (CC/LT/LB) Ethernet OAM (LM/DM) QoS Classify
9
E1 SNCP
10
STM-1 APS Protection *2 STM-1 MUX/DEMUX *2
3 4 5 6 7
11
Note: *1
Initial Key 2xFE
Key Configuration
Upgrade Key-1
Default
2xFE to 2xGE
Default
OFF to 2xGbE
Required Option Module
2xGbE OFF 2xGbE OFF ON OFF ON OFF ON OFF ON OFF ON 4 Lv 8 Lv OFF ON OFF ON OFF ON
GbE Module Default
256 to 4094 Table
Default
OFF to ON
Default
OFF to ON
Default
OFF to ON
Default
4 Lv to 8 Lv
Default
OFF to ON
Clock Module
Default
OFF to ON
STM1 Module
Default
OFF to ON
Clock Module STM1 Module
IMPORTANT NOTICE, READ BEFORE USE
Source Doc. No: Rev. No. & Date
400-iPASO116-01 / Mar 2011
Software key
As this document contains information necessary for NEC's internal document management such as revision numbers, revision history etc., it is strictly prohibited to provide this document in full, in printed or electronic form to the customers. However, necessary information without the internal references can be extracted and included in documents presented to the customer.
CONFIDENTIAL
*2
Extension Function Key No.
Key Item
1
Sync. ETH Clock
2
IEEE 1588v2 PTP Clock
Initial Key OFF ON OFF ON
Upgrade N/C Key (N/C: No Change) N/C
Upgrade Key-1 OFF to ON
Required Option Module CLK2M-C
N/C
OFF to ON
CLK2M-C
