TO CREATE INTERNET SERVICES FOR HUAWEI GPON MA5600T WITH ONT OT550 user name:root name: root password:admin password:admin MA5600>enable MA5600>enable MA5600#config MA5600#config MA5600(config)#vlan MA5600(config)#vlan 1284 smart MA5600(config)#link-aggregation MA5600(config)#link-aggregation 0/19 0,1 egress-ingress (Only 2 1GBPS uplinks used port 0 & 1) MA5600(config)#port MA5600(config)#port vlan 1284 0/19 0 The port list includes link aggregation master port(s), so the other link aggregation port(s) not being included by the port list will be processed MA5600(config)#tcont-profile MA5600(config)#tcont-profile add type1 fix 2500 MA5600(config)#traffic MA5600(config)#traffic table ip car 2048 priority 0 priority-policy pvc-Setting Create traffic descriptor record successfully ----------------------------------------------------------------------------------------------------------------------------------------------------TD Index : 25 Priority :0 Priority policy policy : pvc-pri CAR : 2048 kbps TD Type : NoClpNoScr Service category : ubr Referenced Status: not used EnPPDISC : on EnEPDISC : on Clp01Pcr : 2048 kbps ----------------------------------------------------------------------------------------------------------------------------------------------------MA5600(config)#display MA5600(config)#display ont-profile all ----------------------------------------------------------------------------------------------------------------------------------------------Profile ID Binding Times ----------------------------------------------------------------------------------------------------------------------------------------------1 0 2 0 3 0 4 0 100 1 101 1 104 1 105 1 ----------------------------------------------------------------------------------------------------------------------------------------------Total£º 8 MA5600(config)#ont-profile MA5600(config)#ont-profile add profile-id 128 profile-name OT550 Select from 17-128 Press 'Q' or 'q' to quit input > Number of uplink PON ports<1-2> [1]: > Number of IP addresses<0-IP addresses<0-IP config not supported,1-one supported,1-one address> [1]: > The type of MAC bridge<1-Single,2-Multi> [1]: > Number of GEM ports<1-32> [32]: > Is UNI configuration concerned?<1-not concerned?<1-not concern, 2-concern> [2]: > Number of POTS ports<0-16> [0]:2 [0]:2 > Number of FE ports<0-32> [0]:4 [0]:4 > Number of GE ports<0-8> [0]:
> TDM port type<1-E1,2-T1> [1]: > TDM service type<1-TDMoGEM> [1]: > Number of TDM ports<0-8> [0]: > Number of MOCA ports<0-8> [0]: > Number of CATV ANI ports<0-2> [0]: > Number of CATV UNI ports<0-16> [0]: > Mapping mode<1-VLANID, 2-802_1pPRI, 3-VLANID_802_1pPRI> [1]: > Number of T-CONTs<1-8> [1]:8 > Number of PQs in T-CONT 0<1-8> [4]:1 for ONT PQS ONLY 1 IS AVAILABLE > Number of PQs in T-CONT 1<1-8> [4]:1 > Number of PQs in T-CONT 2<1-8> [4]:1 > Number of PQs in T-CONT 3<1-8> [4]:1 > Number of PQs in T-CONT 4<1-8> [4]:1 > Number of PQs in T-CONT 5<1-8> [4]:1 > Number of PQs in T-CONT 6<1-8> [4]:1 > Number of PQs in T-CONT 7<1-8> [4]:1 Adding an ONT profile succeeded Profile-ID : 127 Profile-Name : OT550 MA5600(config)#interface gpon 0/2
frame 0 slot 2
MA5600(config-if-gpon-0/2)#ont add { portid<0,3> }:1 PON port no. 1 { sn-value<13,13>|ontid<0,63> }:3 ONT assigned ID { sn-value<13,13> }:2011-CEE4A840 { sn-auth|password-auth }:sn-auth { profile-id|profile-name }:profile-id { profile-id-value<1,128> }:127 ONT profile ID created above for the ONT profile add { |desc }:desc { describe-value<1,80> }:group_3_ONT Command: ont add 1 3 2011-CEE4A840 sn-auth profile-id 127 desc group_3_ONT Number of ONTs that can be added: 1, success: 1 PortID :1, ONTID :3 MA5600(config-if-gpon-0/2)#tcont bind-profile { portid<0,3> }:1 PON PORT { ontid<0,63> }:3 ONT ASSIGNMENT { tcont-list<1,13> }:1 TCON-ID { profile-id|profile-name }:profile-id { profile-id<1,512> }:10 self assigned number by the commissioner Command: tcont bind-profile 1 3 1 profile-id 10 Binding a T-CONT profile succeeded
MA5600(config-if-gpon-0/2)#gemport add { portid<0,3> }:1 PON port { gemportid|gemport-num }:gemportid
{ gemportlist<3,159> }:301 Given by the data plan assigned for internet services { service-type }:eth { |encrypt }: Command: gemport add 1 gemportid 301 eth Adding a GEM port succeeded MA5600(config-if-gpon-0/2)#ont gemport bind { portid<0,3> }:1 { ontid<0,63> }:3 { gemport-list<3,159> }:301 { tcont-id<0,7> }:1 { priority-queue<0,7> }:0 Command: ont gemport bind 1 3 301 1 0 The GEM port(s) bind the T-CONT successfully MA5600(config-if-gpon-0/2)#ont gemport mapping { portid<0,3> }:1 { ontid<0,63> }:3 { gemportid<128,3999> }:301 { fe|ge|moca|vlan|priority|iphost|e1 }:vlan { vlan-id<0,4095> }:11 User VLAN for internet { |priority }: Command: ont gemport mapping 1 3 301 vlan 11 Add the GEM port mapping successfully MA5600(config-if-gpon-0/2)#ont port vlan { portid<0,3> }:1 { ontid<0,63> }:3 { iphost|fe|ge|moca }:fe { vlanid<0,4095> }:11 User VLAN for internet { ont-portlist<1,100> }:0 Command: ont port vlan 1 3 fe 11 0 Add ports to the VLAN, total: 1, discarded: 0, success: 1, failed: 0
MA5600(config-if-gpon-0/2)#ont port native-vlan { portid<0,3> }:1 { ontid<0,63> }:3 { iphost|fe|ge|moca }:fe { ont-portid<0,31> }:0 { vlan|priority }:vlan { vlanid<0,4095> }:11 User VLAN for internet
{ |priority }: Command: ont port native-vlan 1 3 fe 0 vlan 11 Setting the native VLAN for the specified port succeeded MA5600(config)#service-port vlan 1284 gpon 0/2/1 gemport 301 multi-service user-vlan 11 rx-cttr 25 tx-cttr 25 MA5600(config)#display ont resume resource the resource of ont config resume : resume MA5600(config)#ont resume resource resume MA5600(config)#interface gpon 0/2 MA5600(config-if-gpon-0/2)#display ont info 1 3 -----------------------------------------------------------------------------F/S/P : 0/2/1 ONT-ID :3 Control flag : active Run state : up Config state : normal Match state : match DBA type : SR Loop mode : disable Ont Profile ID : 127 Authentic type : SN-auth SN : 2011-CEE4A840 Description : group_3_ONT --------------------------------------------------------------------------------------------------------------------------T-CONT-ID T-CONT profile Alloc-ID ---------------------------------------------0 1 3 1 10 259 ---------------------------------------------MA5600(config-if-gpon-0/2)#display ont state { portid<0,3> }:1 { ontid<0,63> }:3 Command: display ont state 1 3 ---------------------------------------------------------------------------F/S/P ONT-ID Control Run Config Match DBA Loop Flag State State State Type Mode ---------------------------------------------------------------------------0/ 2/1 3 active up normal match SR disable ----------------------------------------------------------------------------
