Instructions In structions for Designing a Wheel Wheel in CATIA V5 by catiainstructor (/member/catiainstructor/) (/member/catiainstructor/) Download (/id/Instructions-for-Designing-a-Wheel-in (/id/Instructions-for-Designing-a-W heel-in-CATIA-V5/?download=pdf) -CATIA-V5/?download=pdf) (/id/Instructions-for-Designing-a-Wheel-in-CATIA-V5/)
45 Steps
Ad muted. Undo We'll do our best to show you more Favorite relevant ads +inCollection the future. Help us show you better ads by updating your ads settings. settings .
-Must have access to a working computer -Computer must have CATIA V5 -Computer must be equipped with a keyboard and a 3 button mouse
catia (/tag/type-id/category-technology/keyw ordcatia/) v5 3D design (/tag/type-id/categorytechnology/keyw ord-v5 3d design/)
-User must be acquainted with simple computer navigation -User must follow each step in the specified order
Related
Step 1: Start CATIA V5 on your computer
How to make a simple 3-D Ball Kicking Leg Me chanism using CATIA CATIA DockStylo DockStylo 3D Printing (/id/DockStylo-3DPrinting/) by arvithya arvithya (/member/arvithya/) (/member/arvithya/)
Pocket Bat Signal Design (/id/Pocket-Bat-SignalDesign/) by bwrussell
Build a Professional Prototype Prototype Case for a Linksys Linksys WRT54G Serie s Router in Three Weeks Contact Angle Instrument (/id/Contact-AngleInstrument/) by drumbum11 drumbum11
See More (/tag/type-id/?q=) (http://cdn.instructables.com/FYY/8QG8/H0QH0IZM/FYY8QG8H0QH0IZM.LARGE.jpg)
Home Screen opens upon startup – CLOSE THE SMALLER WINDOW
Click in the sketch region to start profile > drag horizontally right > click drag vertically down > click > drag horizontally right > click drag vertically down > click > drag horizontally right !!Do NOT Click Further!!
Step 10: Draw the Curved Part of the Wheel Profile
Click on the Circle tool from the Profile Toolbar > Click on the center point (intersection of ‘V’&’H’) > Drag away as shown > click >> Press Esc twice on your keyboard
Click the Constrain Icon from the Constraints Toolbar on the right side of the page > Click on the circle > drag away > click > double click dimension > correct dimension > click OK >> Press Esc twice on your keyboard >> select Exit Sketch from right side
Double Click on the Project 3D elements tool from the Operation Toolbar > Click on the innermost diameter of the Rim (should turn YELLOW) >> Press Esc twice on your keyboard
Double Click the Line button from Profile toolbar > Click the VH Intersection > click the yellow line (it will change color when accurate) towards the left of the ‘V’ > click the VH intersection again > Click the yellow line (changes color) towards the right of the ‘V’
Click the Constrain Icon from the Constraints Toolbar > Click the left line > click the ‘V’ > drag away > click > double click dimension > correct dimension > press OK >> repeat for the right line
Select the sketch > Click Pad icon from features toolbar > Correct dimension > reverse direction if required (should go towards front of the wheel) > press OK
Click the Constrain Icon from the Constraints Toolbar on the right side of the page > Click on the circle > drag away > click > double click dimension > correct dimension > click OK >> select Exit Sketch from right side
Step 42: Creating the central lug hole from the sketch
