IMS - Provisioning Guide for Retail v3.1

Huawei Technologies Co., Ltd. Research Document Center

Document Number

Version

Confidentiality

3.1

Open for customer

Product: IMS

72 Pages

GVT IMS Project Provisioning Guide (For Retail Customers)

Huawei Technologies Co., Ltd. All rights reserved

Huawei IMS Southern South America SSA Project Provisioning Guide

Open to GVT and Huawei

Version Control Table Reviewed by

Ver

Date

Notes

Janir Pinheiro – SPO TSD

1.0

31-Aug-11

- First version for customer revision


1.1

21-set-11

- Item 1.30 Voice Mail Service: Added service description and example was changed. - Added Item 1.58: Support FAX service.


1.2

27-set-11

- Items from 1.1 to 1.10: scripts were changed to support SIP Digest authentication


1.3

01-nov-11

- Item 1.33 changed to “Outgoing Call Barring (Cadeado Eletrônico)”.

Yan Guang Hui – Shenzhen R&D

1.4.1

30-nov-11

- Added description for HSS, ENS and ATS part for creation of SIP and H248 users.


1.4.2

11-jan-12

- Scripts for SIP and H248 part were optimized; - Provisioning part about PABX R2 and PRA part (corporate customers) was separated in a new document, now this document only covers the provisioning for Retail subscribers.


1.4.3

12-Jan-12

- Error found on chapter 1.1 and 1.2 about ADD SBR script , the correct notation is SIP URI, not TEL URI.


1.4.4

18-Jan-12

- Chapter 1.9 - MOD SBR script changed to support MWI feature;


- Chapter 1.12 - Added CBA commands when subscriber has default K value; - Added Chapter 1.36 – Set Temporary Suspension of Subscriber; - Added Chapter 1.37 – Remove Temporary Suspension of Subscriber; - Added Chapter 1.38 – List Temporary Suspension of Subscriber. - Added Chapter 1.39 – MSAN Users – Change the Access Part and keep the Subscriber Number - Added Chapter 1.40 – MSAN Users – Change the Subscriber Number and keep Access Part Janir Pinheiro – SPO TSD

1.5

05-Mar-12

- Added Chapter 1.41 – Calling Line Identification Restriction (CLIR); - Added Chapter 1.42 – Calling Line Identification Restriction Override (RIO); - Added Chapter 1.43 – List CLIR; - Added Chapter 1.44 – List RIO;


1.6

09-Apr-12

- Changed command: USE ME now uses customized NE name to support dual homing service; - Added command: ADD HNNRLI must be added also for TEL URI format to support Emergency call service;


2.0

26-Jun-12

- Chapter 1.2 - Added parameter EMGCN for the command ADD ASBR; Parameter NETID was changed to support geo-redundancy service. - Chapter 2 has changed, added new solution based on ENUM index for NCOS.

Copyright by Huawei

-2-



2.1

23-Jul-12


- Changed USE ME command according to the geo-redundancy standard - Fixed MN range for ADD ASBR command on M2000, chapter 1.2 - Updated SIFCID values for ADD HSIFC command on HSS - Added parameter EMGCN description on chapter 1.2 - Chapter 2.3.14: MOD SBR command for NCOS 25 has changed (added ENUM index).


2.2

13-Sep-12

- Chapter 2.3.21: Changes in NCOS 71 configuration - Chapter 2.3.22: Changes in NCOS 72 configuration

TanGuangsheng – Shenzhen R&D

2.3

27-Oct-12

- Add Call-out authority CCOS1 ~ CCOS16 to subscribers. - MN parameter is optional in the command ADD ASBR. - MENAME change to ATS in the PBX related commands. - Add some commands for the NCOS 25. - Add Chapter 2.4 General Blocking for Retail Subscribers.


2.4

28-Jan-13

- Updated SIFCID values for ADD HSIFC command on HSS - Updated parameter PRI for the command ADD ASBR on M2000 to be in accordance with SIP digest authentication scheme.

TianZhiGang R&D

–

Shenzhen

2.5

14-Mar-13

- Renew chapter “1.14 SIP PBX subscribers”

TianZhiGang R&D

–

Shenzhen

2.6

27-Mar-13

- Renew the document associate with PBX service provisioning chapters.

Wangqiujing – China GSRC

2.7

20-May-13

- Update the chapter 1.2, add an IMPORTANT note and three commands at page 26.


2.8

24-May-13

- Update the chapter 1.2, add a description to commands ADD ANI at page 26.


2.9

11-Jun-13

- Add Chapter 1.45 Apply Number Change Announcement for changed number

Janir Pinheiro – SPO NIS

3.0

31-Jul-13

- Update the chapter 1.12: modify terminal command for activation when subscriber has default K value to #66#. - Update the chapter 1.1 and 1.2: add information for referring to “Table 1” when configuring CSC (call source) parameter for ADD SBR command in ATS. - “ADD SBR” adds a parameter FLBGRP to differentiate user type.

Janir Pinheiro – SPO NIS

3.1

23-Aug-13

- Added chapters 1.14.1 and 1.14.2: Procedure to configure PBX hunting group when associated subscriber has valid number (DNH) and virtual number (DLH).

Copyright by Huawei

-3-



Table of Contents 1 SUBSCRIBER CREATION AND SERVICE CONFIGURATION .................................................................................... 7 1.1 Create New SIP subscriber .................................................................................................................................................... 7 1.2 Create New H.248 subscriber .............................................................................................................................................. 14 1.3 Remove SIP Subscriber ....................................................................................................................................................... 26 1.4 Remove H.248 Subscriber ................................................................................................................................................... 27 1.5 List SIP subscriber database parameters ............................................................................................................................. 28 1.6 List H.248 subscriber database parameters ......................................................................................................................... 29 1.7 Give Conference Service Right to Subscriber ....................................................................................................................... 30 1.8 Call Waiting ........................................................................................................................................................................ 30 1.9 Voice Mail System ............................................................................................................................................................... 31 1.10 Call Forward Unconditional (CFU) ..................................................................................................................................... 33 1.11 Change Subscriber Call Source .......................................................................................................................................... 34 1.12 Outgoing Call Barring (Cadeado Eletrônico) ...................................................................................................................... 35 1.12.1 Command Description ....................................................................................................................................................... 35 1.12.2 Terminal commands........................................................................................................................................................... 37 1.13 Calling Line Identification Presentation (CLIP) ................................................................................................................... 37 1.14 SIP PBX subscribers ........................................................................................................................................................... 38 1.14.1 PBXSBR with valid subscriber number (DNH) .................................................................................................................... 38 1.14.2 PBXSBR with virtual subscriber number (DLH) .................................................................................................................. 41 1.15 H.248 PBX subscribers ...................................................................................................................................................... 43 1.16 Change Subscriber Restriction Group from 1029 to none 65535 ....................................................................................... 44 1.17 Remove Conference Authority from Subscriber ................................................................................................................ 44 1.18 Remove Call Waiting Authority from Subscriber ............................................................................................................... 45 1.19 Remove CFU from subscriber ............................................................................................................................................ 45 1.20 Change Subscriber Call Source .......................................................................................................................................... 46 Copyright by Huawei

-4-



1.21 Remove Outgoing Call Barring (Cadeado Eletrônico) from subscriber ............................................................................... 46 1.22 Remove CLIP authority from subscriber ............................................................................................................................ 47 1.23 Remove SIP subscriber from a PBX group ......................................................................................................................... 47 1.24 Remove H.248 Subscriber from a PBX group ..................................................................................................................... 48 1.25 Reset Subscriber Password to default value (Cadeado Eletrônico) .................................................................................... 48 1.26 List Call Waiting ................................................................................................................................................................ 49 1.27 List Conference ................................................................................................................................................................. 50 1.28 List Voice Mail Service ...................................................................................................................................................... 50 1.29 List CFU (Call Forwarding Unconditional) .......................................................................................................................... 51 1.30 List Call Source .................................................................................................................................................................. 52 1.31 List CLIP ............................................................................................................................................................................ 53 1.32 List PBX subscribers .......................................................................................................................................................... 53 1.33 List Outgoing Call Barring (Cadeado Eletrônico) ................................................................................................................ 54 1.34 Register CFU from IMS no subscriber intervention............................................................................................................ 54 1.35 Support Fax Service .......................................................................................................................................................... 55 1.36 Set Temporary Suspension of subscriber........................................................................................................................... 56 1.37 Remove Temporary Suspension of subscriber ................................................................................................................... 56 1.38 List Temporary Suspension of subscriber .......................................................................................................................... 57 1.39 MSAN Users – Change the Access Part and keep the Subscriber Number .......................................................................... 57 1.40 MSAN Users – Change the Subscriber Number and keep Access Part ................................................................................ 58 1.41 Calling Line Identification Restriction (CLIR) ...................................................................................................................... 58 1.42 Calling Line Identification Restriction Override (RIO) ........................................................................................................ 59 1.43 List CLIR ............................................................................................................................................................................ 59 1.44 List RIO ............................................................................................................................................................................. 60 1.45 Apply Number Change Announcement for changed number ............................................................................................ 60 1.45.1 Modify a current record for number change announcement: ........................................................................................... 60 1.45.2 Add a new record to apply a number change announcement: ......................................................................................... 61

2 CONFIGURATION ACCORDING TO THE CLASS OF SERVICE (NCOS) ................................................................. 62 2.1 General Rules: .................................................................................................................................................................... 62 2.2 List of NCOS ........................................................................................................................................................................ 63

Copyright by Huawei

-5-



2.3 Commands for provisioning ................................................................................................................................................ 64 2.3.1 NCOS 1 ................................................................................................................................................................................. 64 2.3.2 NCOS 2 ................................................................................................................................................................................. 64 2.3.3 NCOS 3 ................................................................................................................................................................................. 65 2.3.4 NCOS 4 ................................................................................................................................................................................. 65 2.3.5 NCOS 15 ............................................................................................................................................................................... 65 2.3.6 NCOS 16 ............................................................................................................................................................................... 65 2.3.7 NCOS 17 ............................................................................................................................................................................... 66 2.3.8 NCOS 19 ............................................................................................................................................................................... 66 2.3.9 NCOS 20 ............................................................................................................................................................................... 66 2.3.10 NCOS 21 ............................................................................................................................................................................. 66 2.3.11 NCOS 22 ............................................................................................................................................................................. 66 2.3.12 NCOS 23 ............................................................................................................................................................................. 67 2.3.13 NCOS 24 ............................................................................................................................................................................. 67 2.3.14 NCOS 25 ............................................................................................................................................................................. 67 2.3.15 NCOS 30 ............................................................................................................................................................................. 67 2.3.16 NCOS 31 ............................................................................................................................................................................. 68 2.3.17 NCOS 32 ............................................................................................................................................................................. 68 2.3.18 NCOS 33 ............................................................................................................................................................................. 68 2.3.19 NCOS 34 ............................................................................................................................................................................. 68 2.3.20 NCOS 41 ............................................................................................................................................................................. 69 2.3.21 NCOS 71 ............................................................................................................................................................................. 69 2.3.22 NCOS 72 ............................................................................................................................................................................. 69 2.4 General Blocking for Retail Subscribers............................................................................................................................... 69 2.4.1 xxxBIO .................................................................................................................................................................................. 69

Copyright by Huawei

-6-



1 Subscriber Creation and Service Configuration 1.1 Create New SIP subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189", REALM="ims1.gvt.net.br"; ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]", PBXUSERFLAG=FALSE; ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189"; SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1; SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1; SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE; SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE; SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]"; SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189"; SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621; ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a; ADD HNNRLI:IMPU="tel:+556239901189 ",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a; USE ME:MENAME=ENS; ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101, FLAGS="U", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";

Copyright by Huawei

-7-



USE ME:MENAME=ATS; ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO, NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1, CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967 295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1; ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;

Command Description • USE ME:MENAME=HSS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",

REALM="ims1.gvt.net.br"; Description: Add SIP Digest authentication configuration for this user. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits) HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI. PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character excepting the symbols & “ ‘ and it has a maximum length of 32 digits. IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado Eletrônico). REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:

SPO

ims1.gvt.net.br

RJO

ims1.gvt.net.br

CTA

ims2.gvt.net.br

MGA

ims2.gvt.net.br

BHE

ims3.gvt.net.br

RCE

ims3.gvt.net.br

• ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]",

PBXUSERFLAG=FALSE;

Copyright by Huawei

-8-



Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and the associated IMPU for the IMS subscription in the HSS service database. SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8 digits). As a default, SUBID value is the same with value of IMPI. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits), the parameter must be defined by running ADD HSDAINF first. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber has the PBX service (chapter 1.35), this value must be change to TRUE. Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER) • ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";

Description: Add an IMPU for an existing IMPI to the HSS service database. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits), the parameter must be defined by running ADD HSDAINF. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1; • SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;

Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template ID. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is referred to here. GVT default value is “1”, there is only one value for one IMS site. • SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE; • SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;

Description: It sets the registration authority for the specified IMPU in the HSS service database. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain.

Copyright by Huawei

-9-



REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is not allowed. The GVT default value is TRUE. Value range: FALSE (False), TRUE(True) • SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";

Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the IRS, if a number registration is successful, then all the other numbers automatically registered. IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. The value 0 means deleting the specified IMPU from the IRS. IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI format. Example: IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; Means two different names for the same subscriber IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"&\"sip:[email protected]\" "; Means three different names for the same subscriber. • SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";

Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The default IMPU provides a default value for service processing at the network side. It is used when required for service processing. IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. • SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";

Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database. For example, If A and B share the service profile, then A and B are the same for CSCF. BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI or TEL URI format IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. • SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";

Copyright by Huawei

- 10 -



Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the same for AS. ALIASID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. • ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;

Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with a maximum of eight shared iFC sets. IMPU(V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel: +55 AC number(8 digits). Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P (MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE). P can assume the follow values: 1 - For intra-office traffic, used for Retail and Corporate, ex: 621 7- For traffic terminated on UGC, used only for Corporate, ex: 627 8 - For traffic terminated on BCF, used only for Vox IP service, ex 628 For more details about this parameter, please refer to the HLD documentation, table 7-2 – Share IFC Template list • ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;

Description: It is used to add a reference location data record for the specified IMPU to the HSS service database. PS: FOR EMERGENCY CALL SERVICES, IT’S MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI AND TEL URI. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT project, the value is “1” for all subscribers. RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't used. Examples:

Curitiba: São Paulo:

CTA_ SPO_ Copyright by Huawei

- 11 -



Alto Rolante: ALRO Aceguá: ACEG RLT (F): It is the type of the reference location information. GVT default value is IEEE-802.11a. • USE ME:MENAME=ENS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server (ENS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,

FLAGS="U", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!"; Description: Add a generic NAPTR resource record for an E.164 number. PS: This configuration is not suitable for VoxIP services, these services are still under analysis together with GVT engineering team, and we will provide a procedure in a new chapter later. E164NUM (V): Specifies an E.164 number or number segment. GVT specified format is a number (8digits). ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the ADD DZONE command before it is referenced here. GVT specified format is “X.X.5.5.e164.arpa”, it is the E.164 format and must be understand like this: 2.6 - > means the area code from right to left, so in this case, AC is 62 5.5 -> means the country code from right to left, so in this case, country code is 55 For Curitiba, the ZONENAME will be 1.4.5.5.e164.arpa, for Porto Alegre will be 1.5.5.5.e164.arpa and so on. ORDER (F): Specifies the order of a NAPTR resource record. A smaller value represents a higher level of order. GVT specified value is 10 PREFERENCE (F): Specifies the preference of a NAPTR resource record. A smaller value represents a higher level of preference. GVT specified value is 101. FLAGS(F): Specifies the flag for querying NAPTR resource records on a terminal. GVT default value is U. SERVICE(F): Specifies the protocol complied with when a regular expression is mapped to a URI address. GVT default value is E2U+sip. REGEXP(V): Specifies the rules for mapping an E.164 number to a URI address. GVT default value is the “!^(.*)$!sip:+\\[email protected]\;user=phone!” format. This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:

SPO

!^(.*)$!sip:+\\[email protected]\;user=phone!

RJO


Copyright by Huawei

- 12 -


CTA


MGA


BHE


RCE



• USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. •

ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE, VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14= 1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6 5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;

•

ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN, VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14= 1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6 5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1; Description: This command is used to add a Subscriber Data Template to the configuration database. Each Subscriber Data Template is identified by a unique template index. You can use the same template to define subscribers with some common attributes. TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different data templates: Index 1: for SIP / h248 subscribers Index 2: for R2 / PRA subscribers PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the command ADD SBR, it will not be needed to be included in the template, so you can define the template with standard values. NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter is one of the elements Supplement Service Right. It is the default service GVT. The value is 1. NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements Supplement Service Right. It is the default service GVT. The value is 1. Copyright by Huawei

- 13 -



Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing Centrex, customized Operator and customized supply service. Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local Toll call-in authority. CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW, G711_64K_U_LAW, G722, G723, G729, and AMR. The value “1” means that the codec is set, “0” means that it is not set. VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being referenced here.GVT value is 1. • ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=3, TEMPLATEIDX=1;

Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the subscriber in the configuration database. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here. FLBGRP (V): It is used to indicate the user access type. For SIP user, the value is 3. CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the MML Command - ATS9900 window before being referenced here. Please refer to the “Table 1” for all call source codes currently used on IMS Network before adding this command. TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running ADD TP before being referenced here.

1.2 Create New H.248 subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189", REALM="ims1.gvt.net.br";

Copyright by Huawei

- 14 -



ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]", PBXUSERFLAG=FALSE; ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189"; SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1; SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1; SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE; SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE; SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]"; SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189"; SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621; ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a; ADD HNNRLI:IMPU="tel:+556239901189",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a; USE ME:MENAME=ENS; ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!";

ORDER=10,

PREFERENCE=101,

FLAGS="U",

USE ME:MENAME=ATS; ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE,VCCFLAG=NO,VTFLAG=NO, NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CCO2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1, CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14=1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967 295,OUTRST=NO,INRST=NO,NOAT=20,RINGCOUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITIN G,SCF=NO,LMTGRP=65534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1; ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1; USE ME:MENAME=M2000; ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", PRI="+556239901189", REGTP=SINGLE, DID=ESL, MN=22, EID="10.140.72.130:2944", TID="0", HNID="HNID01", NETID="VNID01", NETINFO="GNA_", PHNCON="AC62", DIGMAP=0, PWD="1189", EMGCN=”EMG01”, DP=YES, DR=YES, CONF=0;

Note: The parameter MN (Module Number) is an optional parameter, if it is omitted, the AGCF will automatically distribute the new subscriber based on its internal logic. i.e. The system invoking this interface doesn’t need to input this parameter during creating new subscribers, unless it has some special reason to manually assign the new subscriber to a specific module. If the number of MGW exceeds the capability of the module, the system will return the 268034, and the description is “The table exceeds the capability of the module”.

Command Description Copyright by Huawei

- 15 -



• USE ME:MENAME=HSS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • ADD HSDAINF: IMPI="+556239901189", HUSERNAME="+556239901189", PWD="1189",

REALM="ims1.gvt.net.br"; Description: Add SIP Digest authentication configuration for this user. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits) HUSERNAME (V): The user name, used to register the subscriber on HSS. In this field, must fill the number in the format + 55 AC number (8 digits). As a default, HUSERNAME value is the same with value of IMPI. PWD (V): The user password, used to register the subscriber on HSS. This field can be filled by any character excepting the symbols & “ ‘ and it has a maximum length of 32 digits. IMPORTANT = this password is only used for registration of subscriber, it has no relation with password for supplementary services. For SS, refer to Chapter 1.25 - Reset Subscriber Password to default value (Cadeado Eletrônico). EMGCN (V): Emergence Call Group Name. It specifies the name of the emergence call group that the subscriber to be added belongs to. When this parameter is specified for a subscriber, the subscriber will be able to call the emergency numbers defined for the specified group. GVT default value is EMG01. REALM: (V): This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:

SPO

ims1.gvt.net.br

RJO

ims1.gvt.net.br

CTA

ims2.gvt.net.br

MGA

ims2.gvt.net.br

BHE

ims3.gvt.net.br

RCE

ims3.gvt.net.br

• ADD HSUB: SUBID="+556239901189", IMPI="+556239901189", IMPU="sip:[email protected]",

PBXUSERFLAG=FALSE; Description: Add an IMS subscription, specify an ID for the IMS subscription, and it is optional to add an IMPI and the associated IMPU for the IMS subscription in the HSS service database. SUBID (V): This is a unique identified on the HSS. In this field, must fill the number in the format +55 AC number (8 digits). As a default, SUBID value is the same with value of IMPI. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits), the parameter must be defined by running ADD HSDAINF first. Copyright by Huawei

- 16 -



IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. PBXUSERFLAG (V): This is the PBX user flag. This parameter is optional. The default value is FALSE, if the subscriber has the PBX service (chapter 1.35), this value must be change to TRUE. Value range: TRUE (PBXUSER), FALSE (NOTPBXUSER) • ADD HIMPU: IMPI="+556239901189", IMPU="tel:+556239901189";

Description: Add an IMPU for an existing IMPI to the HSS service database. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits), the parameter must be defined by running ADD HSDAINF. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. • SET HVNTPLID: IMPU="sip:[email protected]", VNTPLID=1; • SET HVNTPLID: IMPU="tel:+556239901189", VNTPLID=1;

Description: It sets the visited network template ID for the specified IMPU in the HSS service database. If the IMPU belongs to an IRS, the other IMPUs in the IRS are automatically registered with the same visited network template ID. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel: +55 AC number (8 digits). Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. VNTPLID (F): This is an index value; this parameter must be set by using the ADD HVNTPL command before it is referred to here. GVT default value is “1”, there is only one value for one IMS site. • SET HREGAUTH: IMPU="tel:+556239901189", REGAUTH=TRUE; • SET HREGAUTH: IMPU="sip:[email protected]", REGAUTH=TRUE;

Description: It sets the registration authority for the specified IMPU in the HSS service database. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. REGAUTH (V): The value TRUE means that the registration is allowed; the value FALSE means that the registration is not allowed. The GVT default value is TRUE. Value range: FALSE (False), TRUE(True) • SET HIRS: IRSID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; Copyright by Huawei

- 17 -



Description : It set the implicit registration set (IRS) attribute for multiple IMPUs in the HSS service database. In the IRS, if a number registration is successful, then all the other numbers automatically registered. IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. The value 0 means deleting the specified IMPU from the IRS. IMPULIST (V): The IMPU list can contain up to 10 IMPUs separated by &, The IMPU must be set by running the operation ADD HSUB, or ADD HIMPU before it is referred to here. The IMPU value must be in SIP URI or TEL URI format. Example: IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\""; Means two different names for the same subscriber IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"&\"sip:[email protected]\" "; Means three different names for the same subscriber. • SET HDEFIMPU: IRSID=1,IMPU="sip:[email protected]";

Description: It sets the default IMPU for the specified implicit registration set (IRS) in the HSS service database. The default IMPU provides a default value for service processing at the network side. It is used when required for service processing. IRSID (F): This parameter is unique on the HSS and must be filled as “1” in all the records. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. • SET HSPSHARE: BASEIMPU="sip:[email protected]", IMPU="tel:+556239901189";

Description: It shares a service profile between an IMPU and the specified base IMPU in the HSS service database. For example, If A and B share the service profile, then A and B are the same for CSCF. BASEIMPU (V): The base IMPU whose associated service profile is to be shared. The IMPU value must be in SIP URI or TEL URI format IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. • SET HALIASPU: ALIASID=1, IMPULIST="\"sip:[email protected]\"&\"tel:+556239901189\"";

Description: This operation to set an alias group ID for multiple IMPUs in the HSS service database. The alias group refers to a collection of the IMPUs that share the service profile in an implicit registration set (IRS). You can fulfill one of the following tasks using the command. For example, in the alias group contains A and B, then A and B are the same for AS. ALIASID (F): This parameter is unique on the HSS and must be filled as “1” in all the records.

Copyright by Huawei

- 18 -



IMPULIST (V): An IMPU list can contain up to 10 IMPUs separated by &, The IMPUs contained in an IMPU list must be set before they are referred to here. They are obtainable by running the LST HSUB operation. The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. • ADD HSIFC:IMPU="sip:[email protected]", SIFCID=621;

Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with a maximum of eight shared iFC sets. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. SIFCID (V): This is an index value. GVT standard is XX+P, where XX is according to the IMS Site: 41+P (CTA), 44+P (MGA), 11+P (SPO), 21+P (RJO), 31+P (BHE) and 81+P (RCE). P can assume the follow values: 1 - For intra-office traffic, used for Retail and Corporate, ex: 621 7- For traffic terminated on UGC, used only for Corporate, ex: 627 8 - For traffic terminated on BCF, used only for Vox IP service, ex 628 For more details about this parameter, please refer to the HLD documentation, table 7-2 – Share IFC Template list • ADD HNNRLI:IMPU="sip:[email protected]",RLINDEX=1,RLI="GNA_",RLT=IEEE-802.11a;

Description: It is used to add a reference location data record for the specified IMPU to the HSS service database. PS: FOR EMERGENCY CALL SERVICES, IT’S MANDATORY TO ADD THIS COMMAND FOR BOTH FORMATS, SIP URI AND TEL URI. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. RLINDEX (V): this is an index for this command. A subscriber can have up to 5 different location records, but for GVT project, the value is “1” for all subscribers. RLI (V): The field RLI (Reference Location Information) is used to mark the city where the subscriber belongs to, and on E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't used. Examples:

Curitiba: CTA_ São Paulo: SPO_ Alto Rolante: ALRO Aceguá: ACEG RLT (F): It is the type of the reference location information. GVT default value is IEEE-802.11a. • USE ME:MENAME=ENS;

Copyright by Huawei

- 19 -



Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server (ENS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • ADD DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa", ORDER=10, PREFERENCE=101,

FLAGS="U", SERVICE="E2U+sip", REGEXP="!^(.*)$!sip:+\\[email protected]\;user=phone!"; Description: Add a generic NAPTR resource record for an E.164 number. PS: This configuration is not suitable for VoxIP services, these services are still under analysis together with GVT engineering team, and we will provide a procedure in a new chapter later. E164NUM (V): Specifies an E.164 number or number segment. GVT specified format is a number (8digits). ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the ADD DZONE command before it is referenced here. GVT specified format is “X.X.5.5.e164.arpa”, it is the E.164 format and must be understand like this: 2.6 - > means the area code from right to left, so in this case, AC is 62 5.5 -> means the country code from right to left, so in this case, country code is 55 For Curitiba, the ZONENAME will be 1.4.5.5.e164.arpa, for Porto Alegre will be 1.5.5.5.e164.arpa and so on. ORDER (F): Specifies the order of a NAPTR resource record. A smaller value represents a higher level of order. GVT specified value is 10 PREFERENCE (F): Specifies the preference of a NAPTR resource record. A smaller value represents a higher level of preference. GVT specified value is 101. FLAGS(F): Specifies the flag for querying NAPTR resource records on a terminal. GVT default value is U. SERVICE(F): Specifies the protocol complied with when a regular expression is mapped to a URI address. GVT default value is E2U+sip. REGEXP(V): Specifies the rules for mapping an E.164 number to a URI address. GVT default value is the “!^(.*)$!sip:+\\[email protected]\;user=phone!” format. This field refers to the IMS domain the subscriber refers to. It can assume the follow parameters:

SPO


RJO


CTA


MGA


BHE


Copyright by Huawei

- 20 -


RCE



• USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. •

ADD TP:TEMPLATEIDX=1,TEMPLATENAME="SIP_H248_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=IMSSIPUE, VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14= 1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6 5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1;

•

ADD TP:TEMPLATEIDX=2,TEMPLATENAME="R2_PRA_USERS",DSPIDX=65534,LP=0,CSC=0,UTYPE=PSTN, VCCFLAG=NO,VTFLAG=NO,NSCLIP=1,NSSCCA=1,LCO=1,LC=1,LCT=1,NTT=1,ITT=1,INTT=1,IITT=1,IOLT=1,CCO1=1,CC O2=1,CCO3=1,CCO4=1,CCO5=1,CCO6=1,CCO7=1,CCO8=1,CCO9=1,CCO10=1,CCO11=1,CCO12=1,CCO13=1,CCO14= 1,CCO15=1,CCO16=1,IDDCI=1,NTCI=1,LTCI=1,RSC=65535,CIG=4294967295,OUTRST=NO,INRST=NO,NOAT=20,RING COUNT=4,VMAIND=1,VDMAIND=65535,TGRP=65534,TIDHLD=HOLD,TIDCW=PLEASE_WAITING,SCF=NO,LMTGRP=6 5534,FLBGRP=65535,SLBGRP=65535,COP="0000",G711_64K_A_LAW=1,G729=1,AMR=1,T38=1; Description: This command is used to add a Subscriber Data Template to the configuration database. Each Subscriber Data Template is identified by a unique template index. You can use the same template to define subscribers with some common attributes. TEMPLATEIDX (V): It defines the index of the Subscriber Data Template. In GVT project, we will use two different data templates: Index 1: for SIP / h248 subscribers Index 2: for R2 / PRA subscribers PS: For some parameters (For example: LP and CS), because it will be changed for each subscriber in the command ADD SBR, it will not be needed to be included in the template, so you can define the template with standard values. NSCLIP (F): It specifies the Calling Line Identification Presentation (CLIP) service right of a subscriber. This parameter is one of the elements Supplement Service Right. It is the default service GVT. The value is 1. NSSCCA (F): It specifies the Collect Call(SCCA) service right of a subscriber. This parameter is one of the elements Supplement Service Right. It is the default service GVT. The value is 1. Call-out authority (V): It specifies the call-out authority. By default, the system configures the following call-out authorities for the subscriber data template: intra office, local, local toll, national toll, intra-Centrex, outgoing Centrex, customized Operator and customized supply service.

Copyright by Huawei

- 21 -



Call-in authority (V): It specifies the call-in authority. By default, the system configures the following call-in authorities for the subscriber data template: International call-in authority, National Toll call-in authority and Local Toll call-in authority. CODEC (V): It specifies the Supported Codec. By default, GVT system need support G711_64K_A_LAW, G711_64K_U_LAW, G722, G723, G729, and AMR. The value “1” means that the codec is set, “0” means that it is not set. VMAIND (F): This is the Voice mailbox address index; it specifies the index of a voice mailbox address for a specified subscriber. It must be defined by running ADD VOICEMAIL in the MML Command - ATS9900 window before being referenced here.GVT value is 1. • ADD SBR:IMPU="sip:[email protected]", LP=62, CSC=1001, FLBGRP=6, TEMPLATEIDX=1;

Description: It is used to add an ATS subscriber and set the related service rights and basic attributes of the subscriber in the configuration database. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 LP (V): It specifies the local DN set of a subscriber. The value 65534 is a wildcard. When the IMPU is in local TEL URI format, such as tel: 39901176, this parameter and IMPU together identify a subscriber. In this case, the parameter must be defined by running ADD LDNSET in the MML Command - ATS9900 window before being referenced here. CSC (V): It specifies the call source of a subscriber. The parameter must be defined by running ADD CALLSRC in the MML Command - ATS9900 window before being referenced here. Please refer to the “Table 1” for all call source codes currently used on IMS Network before adding this command. FLBGRP (V): It is used to indicate the user access type. For H.248 user, the value is 6. TEMPLATEIDX (V): It specifies the index of the Subscriber Data Template. The parameter must be defined by running ADD TP before being referenced here. • USE ME:MENAME=M2000;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management Server M2000. MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • ADD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", PRI="+556239901189",

REGTP=SINGLE, DID=ESL, MN=22, EID="10.140.72.130:2944", TID="0", HNID="HNID01", NETID="VNID01", NETINFO="GNA_", PHNCON="AC62", DIGMAP=0, PWD="1189", EMGCN=”EMG01”, DP=YES, DR=YES, CONF=0; Description: It is a configuration command, and is used to add A-CSCF subscriber data in the configuration database. This function is used to configure functions provided by the AGCF. Copyright by Huawei

- 22 -



SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation. PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. From now on, this will be the “facility” name of the GVT subscriber. It must have the format according to the example below (from the GVT HLD):

Site

User Type

IMPU1 (TEL URI)

IMPU2 (SIP URI)

SPO

User

tel: E.164

sip:[email protected]

RJO

User

tel: E.164


CTA

User

tel: E.164


MGA

User

tel: E.164


BHE

User

tel: E.164


RCE

User

tel: E.164


PRI (V): The private user ID for IMS subscribers is a globally unique identity defined by a home network carrier. It is used to uniquely identify a piece of subscription in the home network from a network perspective. The value of this parameter must be the same as the user ID defined on the HSS and ATS. In GVT Network Design, we will use the PUI notation without the sip: suffix and domain, it’s according E.164 standard. Example: PUI="sip:[email protected]", PRI="+556239901189" REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed. DID (F): Port type. It will be ESL in all situations. This parameter will be fixed. MN (V): Module Number, It specifies the module number of the UACU on which the subscriber is configured. It is valid only for ESL subscribers. The value range is 22-101. The value of the parameter must be defined in ADD BRD before being referenced. EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address of the AG(MSAN) + “:” + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of Keymile MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface. TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. It’s the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on V5 interface. HNID (V): Home Network ID. This is the Index of the Home Network database. We recommend to create a index like the table below, in case of GVT intends to set up an additional home network in the future. More information about Home Networks, please refer to the documentation.

Site

Home Network Name (for use on ADD ASBR)

Home Network ID

SPO

HNID01

ims1.gvt.net.br

Copyright by Huawei

- 23 -



RJO

HNID01

ims1.gvt.net.br

CTA

HNID02

ims2.gvt.net.br

MGA

HNID02

ims2.gvt.net.br

BHE

HNID03

ims3.gvt.net.br

RCE

HNID03

ims3.gvt.net.br

NETID (V): Visited Network ID. This is the Index of the Visited Network database. We recommend creating an index like the table below, in case of GVT intends to set up a different Visited Network in the future. More information about Visited Networks, please refer to the documentation. PS: VNID in GVT Network topology is directly associated to the number of AGCFs in the network.

Site

Visited Network Name (for use on ADD ASBR)

Visited Network ID

SPO

VNID01

agcf1-spo7.ims1.gvt.net.br

RJO

VNID02

agcf1-rjo6.ims1.gvt.net.br

CTA

VNID01

agcf1-cta7.ims2.gvt.net.br

MGA

VNID02

agcf1-mga4.ims2.gvt.net.br

BHE

VNID01

agcf1-bhe4.ims3.gvt.net.br

RCE

VNID02

agcf1-rce3.ims3.gvt.net.br

If a new AGCF must be installed in the future, just need to follow the sequence name, for example, for CTA: Site

Visited Network Name (for use on ADD ASBR)

Visited Network ID

CTA

VNID02

agcf2-cta7.ims2.gvt.net.br

NETINFO (V): This parameter is related to the Access Network Information (ANI), and it’s used to determine the location-info of the subscriber. This information appears on the INVITE message and it’s used for E-CSCF to determine the emergency number (or numbers) that attends this city. The rule adopted for this field is the Anatel notation for the city name, and using a fixed length of 4 digits, filling the last one with "_" if it doesn't used. Copyright by Huawei

- 24 -



Examples:

Curitiba: CTA_ São Paulo: SPO_ Alto Rolante: ALRO Aceguá: ACEG PS: This information must be the same as configured on the parameter RLI when creating the Reference Location Information for an IMPU on HSS Server (item 2 below). PHNCON (V): Phone context. It’s used to fill the A number to match the IMPU standard. For GVT Project, we use Phone Context Database to add the information “+55AC” in front of the original A number. Example: Curitiba-PR will have the PHNCON = AC41. Inside Phone Context table, AC41 indexes to the information “+5541” Goiania-GO will have the PHNCON = AC62. Inside Phone Context table, AC62 indexes to the information “+5562” DIGMAP (V): Digitmap index. PWD (V): It specifies the password used for authentication on HSS. This password has no relation with the password used on supplementary services. The PWD value is the same with the PWD of “ADD HSDAINF”. EMGCN (V): It specifies the Emergency call group. Basically, it defines some dialing rules for emergency calls (like digitmap, other). For this project, there is no need to define a new one, we will keep this parameter as EMG01. DP (V): Download profile from AS, keep it as default. DR (V): Send registration subscription, keep it as default. CONF (F): Conference URI index. It specifies the conference URI index used for applying for a conference. Specifically, the subscriber uses the domain name of the MRF server associated with the conference URI index to instruct the AS to apply for conference resources. This parameter is fixed as 0. IMPORTANT: Before we add subscribers’ information for new cities, we may need these commands to add parameters for referenced: •

ADD VNID: NAME=" VNID01", VNID=" agcf2-gna9.ims2.gvt.net.br ";

Description: It is a configuration command, and is used to add a visited network ID in the configuration database. This function is used to configure functions provided by the AGCF. VNID (V): It is the domain name of the AGCF.

•

ADD ANI: NAME=" GNA_",ANI="GNA_";

Description: this is used to add an access network ID in the configuration database. When we added a new MGW to the network, we need to use this command to add the MGW information on AGCF, normally; we use at least one MGW for each city. NAME (V): this indicates an access network name provide for a AGCF subscriber. It is referenced by the command ADD ASBR. ANI (V): When it is set to an MGW name, it indicates that the subscriber belongs to this MGW.

•

ADD PHNCT: PCN="AC62", PC="+5562"; Copyright by Huawei

- 25 -



Description: It is a configuration command, and is used to add a number context in the configuration database. This function is used to configure functions provided by the AGCF. PC (V): The parameter value is in the format of "+country code"+"area code".

1.3 Remove SIP Subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; RMV HSUB: SUBID="+556239901189"; RMV HSDAINF: IMPI="+556239901189"; USE ME:MENAME=ENS; RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • RMV HSUB: SUBID="+556239901189";

Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service database. Running this command, it will also remove the data from the ATS (RMV SBR) SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is case sensitive. In this field, must fill the number in the format 55 AC number (8 digits). • RMV HSDAINF: IMPI="+556239901189";

Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service database. IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits) • USE ME:MENAME=ENS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server (ENS). Copyright by Huawei

- 26 -



MENAME (V): This parameter refers to the element to be configured, it can be HSS, ENS, ATS, or M2000. • RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";

Description: This command is used to delete NAPTR resource records. E164NUM (V): Specifies an E.164 number or number segment.GVT specified format is a number (8digits). ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the ADD DZONE command before it is referenced here.

1.4 Remove H.248 Subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; RMV HSUB: SUBID="+556239901189"; RMV HSDAINF: IMPI="+556239901189"; USE ME:MENAME=ENS; RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa"; USE ME:MENAME=M2000; RMV ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected] ";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). • RMV HSUB: SUBID="+556239901189";

Description: This command is used to remove a subscription on the HSS. Perform this operation to remove the specified IMS subscription and the IMPI and IMPU associated with the IMS subscription from the HSS service database. Running this command, it will also remove the data from the ATS (RMV SBR) SUBID (V): This is a unique identified on the HSS, The subscription ID is the key parameter used to determine the subscription data to be removed. It is obtainable by running the LST HSUB operation. The value of the parameter is case sensitive. In this field, must fill the number in the format 55 AC number (8 digits). • RMV HSDAINF: IMPI="+556239901189";

Description: This command is used to remove the SIP Digest data record for the specified IMPI from the HSS service database. Copyright by Huawei

- 27 -



IMPI (V): This is the global ID of this subscriber. In this field, must fill the number in the format + 55 AC number (8 digits) • USE ME:MENAME=ENS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the ENUM Server (ENS). • RMV DNAPTRREC: E164NUM="39901189", ZONENAME="2.6.5.5.e164.arpa";

Description: This command is used to delete NAPTR resource records. E164NUM (V): Specifies an E.164 number or number segment.GVT specified format is a number (8digits). ZONENAME (V): Specifies the name of a zone to which the record belongs. This parameter must be defined by the ADD DZONE command before it is referenced here. • USE ME:MENAME=M2000;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management Server (M2000). • RMV ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected] ";

Description: This command is used to remove A-CSCF subscriber data in the configuration database. This function is used to configure functions provided by the AGCF. SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation. PUI (V): This is a Public User ID; The user ID used outside the IMS Core is the public user ID that is used to communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. From now on, this will be the “facility” name of the GVT subscriber. It must have the format according to the example below (from the GVT HLD):

Site

User Type

IMPU1 (TEL URI)

IMPU2 (SIP URI)

SPO

User

tel: E.164


RJO

User

tel: E.164


CTA

User

tel: E.164


MGA

User

tel: E.164


BHE

User

tel: E.164


RCE

User

tel: E.164


1.5 List SIP subscriber database parameters /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS;

Copyright by Huawei

- 28 -



LST SBR:IMPU="sip:[email protected]";

Command Description • USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • LST SBR:IMPU="sip:[email protected]";

Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to indicate that the subscriber has the service authority. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176

1.6 List H.248 subscriber database parameters /****************************AT SPG web portal********************************/ USE ME:MENAME=M2000; LST ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]";

Command Description • USE ME:MENAME=M2000;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management Server M2000. • LST ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]";

Description: It is a configuration command, and is used to query AGCF subscriber data in the configuration database. This function is used to configure functions provided by the AGCF. SOFTXIP (V): The IP address is the IP of AGCF BAM. This value is filled according to the actual situation. PUI (V): This is a Public User ID; the user ID used outside the IMS Core is the public user ID that is used to communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. From now on, this will be the “facility” name of the GVT subscriber. It must have the format according to the example below (from the GVT HLD):

Copyright by Huawei

- 29 -


Site


User Type

IMPU1 (TEL URI)

IMPU2 (SIP URI)

SPO

User

tel: E.164


RJO

User

tel: E.164


CTA

User

tel: E.164


MGA

User

tel: E.164


BHE

User

tel: E.164


RCE

User

tel: E.164


1.7 Give Conference Service Right to Subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]", NSNPTY=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]", NSNPTY=1;

Description: This command is used to modify supplementary service authority data of a subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 NSNPTY (F): It specifies the Conference Call (NPTY) service right of a subscriber. You must set “0” to deactivate, “1” to activate the feature.

1.8 Call Waiting /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS;

Copyright by Huawei

- 30 -



MOD SS:IMPU="sip:[email protected]",NSCW=1; REG COMSS:IMPU="sip:[email protected]", CW=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCW=1;

Description: This command is used to modify supplementary service authority data of a subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 NSCW (V): It specifies the Call Waiting (CW) service right of a subscriber. You must set “0” to deactivate, “1” to activate the feature. • REG COMSS:IMPU="sip:[email protected]", CW=1;

Description: This command is used to register all common supplementary service for a subscriber. When a service is registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800 Web Portal). The service is activated after being registered. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 CW (F): It specifies the call waiting (CW) service right of a subscriber. The CW service is automatically activated once it is registered.

1.9 Voice Mail System /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",NSCFBVM=1,NSMWI=1,VMAIND=1;

Copyright by Huawei

- 31 -



MOD SS:IMPU="sip:[email protected]",NSCFBVM=1; REG COMSS:IMPU="sip:[email protected]",CFBVM=1;

Introduction There are four options where the call can be forwarded to the voice mail system, as below: 1 – The called number is busy: In this case, the subscriber must have the supplementary service “Call Forwarding Busy to Voice Mailbox Right” (NSCFBVM) set to 1. To register this service (REG COMSS), the parameter CFBVM must be set to 1; 2 – The called number does not reply the call: In this case, the subscriber must have the supplementary service “Call Forwarding No Reply to Voice Mailbox Right” (NSCFNRVM) set to 1. To register this service (REG COMSS), the parameter CFNRVM must be set to 1; 3 – Forward all calls to voice mail: In this case, the subscriber must have the supplementary service “Call forwarding Unconditional to Voice Mailbox Right” (NSCFUVM) set to 1. To register this service (REG COMSS), the parameter CFUVM must be set to 1; 4 – Terminal is offline (exclusive for SIP devices): In this case, the subscriber must have the supplementary service “Call forwarding Offline to Voice Mailbox Right” (NSCFNLVM) set to 1. To register this service (REG COMSS), the parameter CFNLVM must be set to 1. Addittionally, the subscriber must have a Voice Mailbox Address Index (VMAIND). This parameter refers to the voice mail box number configured on ATS.


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]", NSCFBVM=1, NSMWI=1, VMAIND=1;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCFBVM (V): This is the supplementary service “Call Forwarding Busy to Voice Mailbox Right”. You must set “0” to remove, “1” to allow the feature. NSMWI (V): This is the supplementary service “Message Waiting Indication Right”. You must set “0” to remove, “1” to allow the feature. VMAIND (V): This parameter refers to the voice mail box number configured on ATS. For this project, we will use “1” for all the cases. In the future, if GVT installs a new Voice Mailbox platform, it can be changed for other values, according to the network configuration. • MOD SS:IMPU="sip:[email protected]",NSCFBVM=1; Copyright by Huawei

- 32 -



Description: This command is used to enable the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCFBVM (V): This is the supplementary service “Call Forwarding Busy to Voice Mailbox Right”, You must set “0” to deactivate, “1” to activate the feature. • REG COMSS:IMPU="sip:[email protected]",CFBVM=1;

Description: This command is used to register all common supplementary service for a subscriber. When a service is registered, the service parameter value must be set to 1 (the check box of the service is selected on the SPG2800 Web Portal). The service is activated after being registered. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 CFBVM (F): It specifies the “Call Forwarding Busy to Voice Mailbox Right” of a subscriber. This service is automatically activated once it is registered.

1.10 Call Forward Unconditional (CFU) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCFU=1; REG CFU:IMPU="sip:[email protected]", DIMPU="tel: 39901188";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCFU=1;

Description: This command is used to enable the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber.

Copyright by Huawei

- 33 -



NSCFU (V): This is the supplementary service “Call Forwarding Unconditional Right”, You must set “0” to deactivate, “1” to activate the feature. • REG CFU:IMPU="sip:[email protected]", DIMPU="tel: 39901188";

Description: This command is used to register the CFU service. If a subscriber has the CFU service registered, the incoming calls are unconditionally forwarded to the subscriber defined by Destination IMPU. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows: To configure an IMPU in SIP URI format, type a string such as sip:[email protected] or [email protected] To configure an IMPU in TEL URI format, type a string such as tel:+ 556239901176 or +556239901176 DIMPU (V): This is the Destination IMPU; it specifies the IMPU of a forwarded-to subscriber. It can be a TEL URI or a SIP URI. It can be a TEL URI or a SIP URI. The rules for setting the parameter are as follows:

、

To configure an IMPU in TEL URI format, type a string such as +556239901188 06239901188 or 39901188

1.11 Change Subscriber Call Source /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",CSC=1001;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]",CSC=1001;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. CSC (V): It specifies the call source code of the subscriber.

Copyright by Huawei

- 34 -



1.12 Outgoing Call Barring (Cadeado Eletrônico) /****************************AT SPG web portal********************************/ //When subscriber selects K value USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",NSCBA=1; MOD SS:IMPU="sip:[email protected]",NSCBA=1, ; //When subscriber has default K value (can only activate / deactivate the feature) USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",NSCBA=1, KVALUE=K3; MOD SS:IMPU="sip:[email protected]",NSCBA=1;

1.12.1 Command Description 1.12.1.1 When subscriber selects K value • USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]",NSCBA=1;

Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it enables the subscriber to use CBA feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to remove, “1” to set the feature. • MOD SS:IMPU="sip:[email protected]",NSCBA=1;

Description: This command is used to enable the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to activate the feature. Copyright by Huawei

- 35 -



1.12.1.1 When subscriber has default K value • USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]",NSCBA=1,KVALUE=K3;

Description: This command is used to modify a specific or a group of parameters on a subscriber. In this case, it enables the subscriber to use CBA feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to remove, “1” to set the feature. KVALUE(V): This is the predefined barring level for this user. It means, the subscriber can only activate or deactivate one type of call barring. Below is a table with the available barring levels: Barring Level K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13

Blocking Scenarios Local Mobile National Long Distance International Long Distance 0900; 0300 and 0500 Local Mobile and National Long Distance Local Mobile and International Long Distance Local Mobile; 0900; 0300 and 0500 National and International Long Distance National Long Distance; 0900; 0300 and 0500 International Long Distance; 0900; 0300 and 0500 Mobile; National and International Long Distance Mobile; International Long Distance; 0900; 0300 and 0500 National and International Long Distance; 0900; 0300 and 0500 Mobile; National and International Long Distance; 0900; 0300 and 0500

• MOD SS:IMPU="sip:[email protected]",NSCBA=1;

Description: This command is used to enable the authority to use the feature for a predefined K value. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCBA(V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to activate the feature.

Copyright by Huawei

- 36 -



1.12.2 Terminal commands 1.12.1.1 When subscriber selects K value * 66 * PPPP * KK #

= Activate CBA feature. PPPP is the password with 4 digits, KK is the K value from 00 to 13.

# 66 * PPPP #

= Deactivate CBA feature. PPPP is the password with 4 digits.

*# 67*OPWD*NPWD #

= Change the user password.

1.12.1.1 When subscriber has default K value # 66 #

= Activate CBA feature.

# 66 * PPPP #

= Deactivate CBA feature. PPPP is the password with 4 digits.

*# 67*OPWD*NPWD #

= Change the user password.

1.13 Calling Line Identification Presentation (CLIP) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCLIP=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCLIP=1;

Description: This command is used to enable the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCLIP (V): This is the supplementary service “Calling Line Identification Presentation Right”, You must set “0” to deactivate, “1” to activate the feature.

Copyright by Huawei

- 37 -



1.14 SIP PBX subscribers 1.14.1 PBXSBR with valid subscriber number (DNH) /****************************AT SPG web portal********************************/ USE ME:MENAME=WORKFLOW; ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=0, SNDP=0 ,CHT=0; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901194",GDN="tel:+556239901193",PSN=1; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901195",GDN="tel:+556239901193",PSN=2; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901196",GDN="tel:+556239901193",PSN=3;

Command Description IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers must be created by following the procedure described on the Chapter 1.1 or 1.2. • USE ME:MENAME=WORKFLOW;

Description: For PBX and Centrex service provisioning, the MENAME must be “WORKFLOW”, it specifies the command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS sites in one redundancy group. Here, this parameter should be set to “WORKFLOW”, as the fixed value. The MENAME with “WORKFLOW” value can only be used when perform on SPG as a “Batch Task”. In soap interface between BSS and SPG, only need to specify the MEGROUP with the “ATS_VPBX” value. Only Virtual PBX ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format detail, please refer . ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=0, SNDP=0,CHT=0; Description: This command is used to add a PBX service data record to the configuration database. To add a PBX service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls. MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this

parameter should be set to “ATS_VPBX”, as the fixed value. GDN (V): It specifies the access code of the PBX group for incoming calls. When an out-PBX subscriber dials the PBX pilot number, the call processing software selects a subscriber in the PBX group based on a specific line hunting mode, or queues the call when all PBX subscribers are busy. A PBX pilot number can be an existing number in the subscriber data table, namely, a valid subscriber number predefined by running ADD SBR. Such a PBX pilot number is not only an access code, but also has all the attributes of an ordinary subscriber. Copyright by Huawei

- 38 -



A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR. QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy, then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend configuration is set this parameter to 1 (YES) for all the cases. SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot number. Options: • MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This

mode helps to select the preferred subscribers. • MAX(FROM_LARGE_TO_SMALL): The ATS always selects the subscriber with the maximum equipment ID. This

mode helps to select the preferred subscribers. • CYC(CYCLIC): The ATS9900 selects PBX subscribers based on the sequence when idle PBX subscribers are added and PBX subscribers are released, and then forms a queue. In subsequent calls, the ATS9900 selects PBX subscribers based on the queue sequence. • UNIFORM(UNIFORM): All the idle subscribers are queued in ascending order based on their record numbers (the

sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement. MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to subscriber requirement. PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call. For PBX group where the associated numbers has valid number (DNH), this value must be 0 (NO). SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or the OCS. Options: DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber. SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging. RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging. For PBX group where the associated numbers has valid number (DNH), this value must be 0 (DO_NOTHING).

Copyright by Huawei

- 39 -



CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1 (Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for this parameter is 0 (NO), but it can be configured according to subscriber requirement. •

ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0;

•


•


•


Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber. MEGROUP (F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this parameter should be set to “ATS_VPBX”, as the fixed value. IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or SIP URI format. GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be defined by running ADD PBX before being referenced here. PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call is connected to the corresponding subscriber.

Copyright by Huawei

- 40 -



1.14.2 PBXSBR with virtual subscriber number (DLH) /****************************AT SPG web portal********************************/ USE ME:MENAME=WORKFLOW; ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=1, SNDP=2 ,CHT=0; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+556239901193",PSN=0; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193101",GDN="tel:+556239901193",PSN=1; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193102",GDN="tel:+556239901193",PSN=2; ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193103",GDN="tel:+556239901193",PSN=3;

Command Description IMPORTANT: PBX subscribers are, first of all, SIP or H248 subscribers. So before do this procedure, the subscribers must be created by following the procedure described on the Chapter 1.1 or 1.2. • USE ME:MENAME=WORKFLOW;

Description: For PBX and Centrex service provisioning, the MENAME must be “WORKFLOW”, it specifies the command will be performed in service flow mode. In service flow mode the command will be sent to both two ATS sites in one redundancy group. Here, this parameter should be set to “WORKFLOW”, as the fixed value. The MENAME with “WORKFLOW” value can only be used when perform on SPG as a “Batch Task”. In soap interface between BSS and SPG, only need to specify the MEGROUP with the “ATS_VPBX” value. Only Virtual PBX ADD/RMV/MOD/LST PBX, ADD/RMV/MOD/LST PBXSBR need to follow the following principle, for the soap format detail, please refer . • ADD PBX: MEGROUP="ATS_VPBX", GDN="tel:+556239901193",QUL=1,SGM=0,MDF=0,PAC=1,SNDP=2,CHT=0;

Description: This command is used to add a PBX service data record to the configuration database. To add a PBX service data record is to configure a PBX group, so that subscribers in the group can be selected to answer calls. MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this

parameter should be set to “ATS_VPBX”, as the fixed value. GDN (V): It specifies the access code of the PBX group for incoming calls. When an out-PBX subscriber dials the PBX pilot number, the call processing software selects a subscriber in the PBX group based on a specific line hunting mode, or queues the call when all PBX subscribers are busy. A PBX pilot number can be an existing number in the subscriber data table, namely, a valid subscriber number predefined by running ADD SBR. Such a PBX pilot number is not only an access code, but also has all the attributes of an ordinary subscriber.

Copyright by Huawei

- 41 -



A PBX pilot number can also be a number that does not exist in the subscriber data table. Such a PBX pilot number is only an access code, and cannot be defined as an ordinary subscriber number by running ADD SBR. QUL (V): It specifies whether the PBX group supports the queuing function. If the parameter is set to 1 (YES), it indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy, then the ATS adds the call to the call queue instead of playing the busy tone to the caller. When subscribers in the PBX group become idle, the ATS connects the calls in the queue to the idle subscribers according to the "first in, first out" principle. If the parameter is set to 0 (NO), it indicates that when a call is addressed to the PBX pilot number and all the subscribers in the PBX group are busy, and then the ATS releases the call directly. The recommend configuration is set this parameter to 1 (YES) for all the cases. SGM (V): It specifies the mode in which the ATS selects a subscriber for answering a call addressed to the PBX pilot number. Options: • MIN(FROM_SMALL_TO_LARGE): The ATS always selects the subscriber with the minimum equipment ID. This

mode helps to select the preferred subscribers. • MAX(FROM_LARGE_TO_SMALL): The ATS always selects the subscriber with the maximum equipment ID. This

mode helps to select the preferred subscribers. • CYC(CYCLIC): The ATS9900 selects PBX subscribers based on the sequence when idle PBX subscribers are added and PBX subscribers are released, and then forms a queue. In subsequent calls, the ATS9900 selects PBX subscribers based on the queue sequence. • UNIFORM(UNIFORM): All the idle subscribers are queued in ascending order based on their record numbers (the

sequences that the PBX subscribers are added by running ADD PBXSBR or MOD PBXSBR). After being selected to answer calls and then released, the subscribers are queued again in the same way. Each release subscriber is added to the end of the queue in turn automatically. After all the subscribers in the previous queue are selected, the ATS selects the subscribers in the current queue. The recommended value for this parameter is 0 (MIN FROM_SMALL_TO_LARGE), but it can be configured according to subscriber requirement. MDF (V): It specifies whether the ATS provides the simultaneous ringing function for the PBX pilot number. The default value is 0 (NO), which indicates that when a call is addressed to the PBX pilot number, the idle subscribers in the PBX group are selected based on the configured line hunting mode. If the parameter is set to 1 (YES), it indicates that when a call is addressed to the PBX pilot number, the phones of all the idle subscribers in the PBX group ring simultaneously. The recommended value for this parameter is 0 (NO), but it can be configured according to subscriber requirement. PAC (V): It specifies whether the ATS displays the PBX pilot number to the callee when a PBX subscriber makes a call. For PBX group where the associated numbers are virtual (DLH), this value must be 1 (YES). SNDP (V): It specifies whether the ATS adds the pilot number AVP to be sent to the CCF or the OCS, for charging issues. Note that the operation specified by the parameter is different from the operation specified by Use pilot number as caller number. Send pilot number mode controls only the contents of the AVP to be sent to the CCF or the OCS. Options: DNTH(DO_NOTHING): The system performs the processing as that carried out for an ordinary subscriber. SDPL(SEND_PILOT): The system sends the PBX pilot number during the charging. RPLC(REPLACE_CALLER_NUM): The system records the PBX pilot number into original caller AVP during the charging. For PBX group where the associated numbers are virtual (DLH), this value must be 2 (REPLACE_CALLER_NUM).

Copyright by Huawei

- 42 -



CHT (V): It indicates whether the PBX group supports non-pilot number line hunting. If this parameter is set to 1 (Yes), the system performs line hunting in a call addressed to a non-pilot number in the PBX group, and the service experience is the same as that provided in a call addressed to a pilot number. If this parameter is set to 0 (No), the system does not perform line hunting in a call addressed to a non-pilot number in the PBX group, and the service experience is the same as that provided in a call addressed to an ordinary subscriber. The recommended value for this parameter is 0 (NO), but it can be configured according to subscriber requirement. •

ADD PBXSBR: MEGROUP="ATS_VPBX", IMPU="tel:+556239901193",GDN="tel:+ 556239901193",PSN=0;

•


•


•


Description: This command is used to add a PBX subscriber data record to the configuration database. To add a PBX subscriber data record is to add a PBX subscriber and configure the attributes of the PBX subscriber. NOTE: the virtual number provisioning has defined with GVT Engineering according to the follow standard: IMPU=PilotNumber+XXX, where XXX is an extension from 100 to 199 (to do not conflict with One-number extensions). To facilitate the operations, the first virtual number which occupies the PSN 1, will be created with the extension 101, for PSN 2, the extension is 102 and so on. MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. For this issue, there is a redundancy ME group named “ATS_VPBX”. Here, this parameter should be set to “ATS_VPBX”, as the fixed value. IMPU (V): It defines an IMPU for a subscriber in the ATS9900 configuration database. Its value can be in TEL URI or SIP URI format. GDN (V): It specifies the pilot number of the PBX group to which the subscriber belongs. The parameter must be defined by running ADD PBX before being referenced here. PSN (V): This is the Line hunting serial number. It specifies the serial number of the PBX subscriber used in line hunting. The line hunting mode is configured by running ADD PBX or MOD PBX. When a call is addressed to the PBX pilot number, the system selects a proper line hunting serial number based on the line hunting mode. Thus, the call is connected to the corresponding subscriber.

1.15 H.248 PBX subscribers The procedure is the same used for SIP subscribers, the only difference is about the access part when adding subscriber on ATS (ADD SBR). Please refer to Chapter 1.14.

Copyright by Huawei

- 43 -



1.16 Change Subscriber Restriction Group from 1029 to none 65535 /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]", CSC=1029, LMTGRP=65534;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]",CSC=1029,LMTGRP=65534;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscribers. CSC (V): It specifies the call source code of the subscriber. LMTGRP (V): It specifies the restriction group of this subscriber. Some call sources uses restriction group to forbid specific calls, like LDN, International, other. You can check some examples of restriction groups used on this project in the Chapter 2 – Configuration According to the Class of Service (NCOS).

1.17 Remove Conference Authority from Subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS;

• MOD SS:IMPU="sip:[email protected]",NSNPTY=0;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSNPTY=0;

Description: This command is used to remove the authority to use the feature. Copyright by Huawei

- 44 -



IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSNPTY (V): This is the supplementary service “Conference Call Right”, You must set “0” to deactivate, “1” to activate the feature.

1.18 Remove Call Waiting Authority from Subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCW=0;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCW=0;

Description: This command is used to remove the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCW (V): This is the supplementary service “Call Waiting Right”, You must set “0” to deactivate, “1” to activate the feature.

1.19 Remove CFU from subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCFU=0;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCFU=0; Copyright by Huawei

- 45 -



Description: This command is used to remove the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCFU (V): This is the supplementary service “Call Forwarding Unconditional Right”, You must set “0” to deactivate, “1” to activate the feature.

1.20 Change Subscriber Call Source /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",CSC=1001;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]", CSC=1001;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. CSC (V): It specifies the call source code of the subscriber.

1.21 Remove Outgoing Call Barring (Cadeado Eletrônico) from subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCBA=0;


Copyright by Huawei

- 46 -



Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCBA=0;

Description: This command is used to remove the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCBA (V): This is the supplementary service “Outgoing Call Barring Right”, You must set “0” to deactivate, “1” to activate the feature.

1.22 Remove CLIP authority from subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCLIP=0;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCLIP=0;

Description: This command is used to remove the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCLIP (V): This is the supplementary service “Calling Line Identification Presentation Right”, You must set “0” to deactivate, “1” to activate the feature.

1.23 Remove SIP subscriber from a PBX group /****************************AT SPG web portal********************************/ USE ME:MENAME=WORKFLOW; RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";

Command Description Copyright by Huawei

- 47 -



• USE ME:MENAME=WORKFLOW;

Description: For details, please refer to Chapter 1.14. • RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";

Description: This command is used to remove a PBX subscriber data record from the configuration database. MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter

should be set to “ATS_VPBX”, as the fixed value. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscribers.

1.24 Remove H.248 Subscriber from a PBX group /****************************AT SPG web portal********************************/ USE ME:MENAME=WORKFLOW; RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";

Command Description • USE ME:MENAME=WORKFLOW;

Description: For details, please refer to Chapter 1.14. • RMV PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";

Description: This command is used to remove a PBX subscriber data record from the configuration database. MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter

should be set to “ATS_VPBX”, as the fixed value. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscribers.

1.25 Reset Subscriber Password to default value (Cadeado Eletrônico) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS;

Copyright by Huawei

- 48 -



MOD SBR:IMPU="sip:[email protected]",COP="1234";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR:IMPU="sip:[email protected]",COP="1234";

Description: This command is used to modify parameters on an existent subscriber. In this case, this command line is to change the password used for the supplementary service “Outgoing Call Barring (Cadeado Eletronico)”. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. COP (V): It specifies the call-out password of a subscriber. This parameter is used in the Outgoing Call Barring service. For this project, the standard is a numeric sequence with four digits.

1.26 List Call Waiting /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]"; DSP COMSS:IMPU="sip:[email protected]";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • LST SS:IMPU="sip:[email protected]";

Description: This command is used to check if the subscriber has the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Call Waiting Right” feature. • DSP COMSS:IMPU="sip:[email protected]"; Copyright by Huawei

- 49 -



Description: This command is used to display all common supplementary service for a subscriber, if the SS appears on the command result, it means that it’s activated. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Call Waiting Right” feature.

1.27 List Conference /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]";



Description: This command is used to check if the subscriber has the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Conference Call Right” feature.

1.28 List Voice Mail Service /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]"; DSP COMSS:IMPU="sip:[email protected]";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). Copyright by Huawei

- 50 -



• LST SBR:IMPU="sip:[email protected]";

Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to indicate that the subscriber has the service authority. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this command, look for these parameters: •

Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to Voice Mailbox (CFUVM) service right of a subscriber.

•

Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM) service right of a subscriber.

•

Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox (CFNRVM) service right of a subscriber.

• DSP COMSS:IMPU="sip:[email protected]";

Description: This command is used to display all common supplementary service for a subscriber, if the SS appears on the command result, it means that it’s activated. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this command, look for these parameters: •

Call Forwarding Unconditional to Voice Mailbox Right: It specifies the Call Forwarding Unconditional to Voice Mailbox (CFUVM) service right of a subscriber.

•

Call Forwarding Busy to Voice Mailbox Right: It specifies the Call Forwarding Busy to Voice Mailbox (CFBVM) service right of a subscriber.

•

Call Forwarding No Reply to Voice Mailbox Right: It specifies the Call Forwarding No Reply to Voice Mailbox (CFNRVM) service right of a subscriber.

1.29 List CFU (Call Forwarding Unconditional) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]"; DSP CFU:IMPU="sip:[email protected]";


Copyright by Huawei

- 51 -




Description: This command is used to check if the subscriber has the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Call Forwarding Unconditional Right” feature. • DSP CFU:IMPU="sip:[email protected]";

Description: This command is used to display the configuration of the CFU service, if it’s activated or deactivated. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber.

1.30 List Call Source /****************************AT SPG web portal********************************/

USE ME:MENAME=ATS; LST SBR:IMPU="sip:[email protected]";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • LST SBR:IMPU="sip:[email protected]";

Description: This command is used to list basic subscriber data. Unless otherwise specified, parameters related with service authority in this command use 0 to indicate that the subscriber does not have the service authority, and 1 to indicate that the subscriber has the service authority. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this command, look for the parameter “Call source code”.

Copyright by Huawei

- 52 -



1.31 List CLIP /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]";



Description: List the supplementary services currently configured for this subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Calling Line Identification Presentation Right” feature.

1.32 List PBX subscribers /****************************AT SPG web portal********************************/ USE ME:MENAME=WORKFLOW; LST PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";


Description: For details, please refer to Chapter 1.14. • LST PBXSBR: MEGROUP="ATS_VPBX", IMPU="sip:[email protected]";

or

• LST PBXSBR: MEGROUP="ATS_VPBX";

Description: This command is used to list PBX subscriber data records in the configuration database. • To list the brief information about all PBX subscriber data records, do not specify any parameter. • To list the detailed information about a specific PBX scriber data record, specify IMPU.

MEGROUP(F): It specifies the name of an ME group. If this parameter is specified, the command is run on the specified ME group. If this parameter is not specified, the command is run on the ME or ME group determined Copyright by Huawei

- 53 -



by the user policy configuration. we have created a redundancy ME group named “ATS_VPBX”. Here, this parameter

should be set to “ATS_VPBX”, as the fixed value. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber.

1.33 List Outgoing Call Barring (Cadeado Eletrônico) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]";



Description: List the supplementary services currently configured for this subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Outgoing Call Barring Right” feature.

1.34 Register CFU from IMS no subscriber intervention /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCFU=1; REG CFU:IMPU="sip:[email protected]",BSV=ALL,BSG=TS11,DIMPU="tel: 39901188",NOTIFYCALLER=NO, PRVTOCER=NO_PRIVACY,PRVTODES=NO_PRIVACY;

Command Description •

USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). •

MOD SS:IMPU="sip:[email protected]",NSCFU=1; Copyright by Huawei

- 54 -



Description: Allow the user to use the Call Forwarding Unconditional supplementary Service. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. NSCFU (V): This is the supplementary service “Call Forwarding Unconditional” and has two conditions, “0” to deactivate the feature, “1” to activate it. •

REG CFU:IMPU="sip:[email protected]",BSV=ALL,BSG=TS11,DIMPU="tel: 39901188", NOTIFYCALLER=NO, PRVTOCER=NO_PRIVACY,PRVTODES=NO_PRIVACY;

Description: Register the Call Forwarding Unconditional supplementary Service on IMS system. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. BSV (F): Means the “Basic Service” to apply the feature, it specifies the media type. Only the calls with selected media types are forwarded. This parameter will be fixed in all the cases. BSG (F): Means the “Basic Service Group”, and for this network it is configured for group TS11 (telephony services) only. DIMPU (V): This is the destination number, and the format can be SIP URI or TEL URI. For this project, we will use TEL URI format, and the number must follow the same dialing rules as the current dialing plan. For example, if it’s a CFU to a local number, it must contain 8 digits, if LDN, must contain 0+CSP+AC+number NOTIFYCALLER (F): It specifies whether to notify the caller when a call is forwarded unconditionally. For this project , it is set as NO in all the cases. PRVTOCER (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing the forwarded-to number) of the 181 message that is sent to the caller when the AS of the service subscriber triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in the future, if GVT decides to mark it on the bill, it can be set to other values. The list of values can be obtained on the Huawei IMS documentation or in the SPG command help. PRVTODES (V): It specifies whether to include the Privacy parameter to the History-Info header field (containing the service subscriber number) of the INVITE message that is sent to the forwarded-to subscriber when the AS of the service subscriber triggers the call forwarding service. Now we will use this parameter fixed for all cases, but in the future, if GVT decides to mark it on the bill, it can be set to other values. The list of values can be obtained on the Huawei IMS documentation or in the SPG command help.

1.35 Support Fax Service /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",NSFAX=1;


USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). Copyright by Huawei

- 55 -


•


MOD SBR:IMPU="sip:[email protected]",NSFAX=1;

Description: Allow the user to support FAX service. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. NSFAX (V): This is the supplementary service “Support Fax” and has two conditions, “0” to deactivate the feature, “1” to activate it.

1.36 Set Temporary Suspension of subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; PRK_SBR:IMPU="sip:[email protected]",STYPE=NOALM,TREAT=PLAYTONEANDRELEASE;


USE ME:MENAME=ATS;


PRK_SBR:IMPU="sip:[email protected]",STYPE=NOALM,TREAT=PLAYTONEANDRELEASE;

Description: This command is used to temporary suspend a subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. STYPE (F): It specifies the seasonal suspend mode of a subscriber. For this project, the parameter is NOALM (NO ALARM) and is fixed. TREAT (F): It specifies the processing mode when a subscriber calls a seasonally suspended subscriber. For this project, the parameter is PLAYTONEANDRELEASE and is fixed.

1.37 Remove Temporary Suspension of subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; RES_PRKSBR:IMPU="sip:[email protected]";


USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS).

Copyright by Huawei

- 56 -


•


RES_ PRKSBR:IMPU="sip:[email protected]";

Description: This command is used to restore the temporary suspension of a subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber.

1.38 List Temporary Suspension of subscriber /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST_PRKSBR:IMPU="sip:[email protected]";


USE ME:MENAME=ATS;


LST_ PRKSBR:IMPU="sip:[email protected]";

Description: This command is used to list the status of the subscriber with temporary suspension, if the service is activated or deactivated. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber.

1.39 MSAN Users – Change the Access Part and keep the Subscriber Number /****************************AT SPG web portal********************************/ USE ME:MENAME=M2000; MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", REGTP=SINGLE, TEN=EID, EID:“10.140.72.130:2944”, TID="1";

Command Description • USE ME:MENAME=M2000;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Management Server M2000. • MOD ASBR: SOFTXIP="10.140.72.224", PUI="sip:[email protected]", REGTP=SINGLE, TEN=EID,

EID:“10.140.72.130:2944”, TID="1"; Description: It is a configuration command, and is used to add A-CSCF subscriber data in the configuration database. This function is used to configure functions provided by the AGCF. Copyright by Huawei

- 57 -



SOFTXIP (V): The IP address is the IP of AGCF site. This value is filled according to the actual situation. PUI(V):Public User ID,The user ID used outside the IMS Core is the public user ID that is used to communicate with others. The value of this parameter must be the same as the user ID defined on the HSS and ATS. REGTP (F): Register type. It will be SINGLE register in all situations. This parameter will be fixed. TEN (V): It specifies the type of the equipment name. This parameter can be “EID” (Equipment ID) or “EDESC” (Equipment Description). Normally the parameter EID is used for this command. EID (V): Equipment ID. This is the identification of the Access Node inside the IMS. The notation is the IP address of the AG(MSAN) + “:” + the signaling port. Example: 10.140.72.130:2944, where 10.140.72.130 is the IP of Keymile MSAN and 2944 is the signaling port. We can compare it as the V5 ID of the V5 interface. INFORMATION: IF the subscriber will keep in the same MSAN, but will just change the TID, there is no need to inform this parameter. TID (V): Terminal ID. It specifies the physical port number of the MG to which the ESL subscriber belongs. It’s the identification of the subscriber port for the corresponding Equipment ID. We can compare it to the L3ADDR on V5 interface.

1.40 MSAN Users – Change the Subscriber Number and keep Access Part IMPORTANT: For this operation, There is no way to change the number, because the subscriber on ATS is associated with a record on HSS that uses the subscriber number as index, so a new configuration on HSS side is also needed. For this reason, the procedure in this case is to remove the subscriber completely and create it again using the new number. For this operation, please refer to Chapters below: Chapter 1.4 - Remove H.248 Subscriber Chapter 1.4 - Create New H.248 subscriber

1.41 Calling Line Identification Restriction (CLIR) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSCLIR=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSCLIR=1;

Description: This command is used to enable the authority to use the feature. Copyright by Huawei

- 58 -



IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCLIR (V): This is the supplementary service “Calling Line Identification Restriction Right”, You must set “0” to deactivate, “1” to activate the feature.

1.42 Calling Line Identification Restriction Override (RIO) /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; MOD SS:IMPU="sip:[email protected]",NSRIO=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SS:IMPU="sip:[email protected]",NSRIO=1;

Description: This command is used to enable the authority to use the feature. IMPU (V): It specifies the IMPU of a specific subscriber. It can be a TEL URI or a SIP URI. More details refer to chapter 1.1 Create New SIP subscriber. NSCLIR (V): This is the supplementary service “Calling Line Identification Restriction Override Right”, You must set “0” to deactivate, “1” to activate the feature.

1.43 List CLIR /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]";


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • LST SS:IMPU="sip:[email protected]"; Copyright by Huawei

- 59 -



Description: List the supplementary services currently configured for this subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Calling Line Identification Restriction Right” feature.

1.44 List RIO /****************************AT SPG web portal********************************/ USE ME:MENAME=ATS; LST SS:IMPU="sip:[email protected]";



Description: List the supplementary services currently configured for this subscriber. IMPU (V): It specifies the IMPU of a specific subscriber. More details refer to chapter 1.1 Create New SIP subscriber. *** For information about this feature, check if the subscriber contains the “Calling Line Identification Restriction Override Right” feature.

1.45 Apply Number Change Announcement for changed number There is an A number changed to B number, when someone make a call to the A number, this call will route to an announcement equipment to tell the caller that A number had changed to B number. The configuration only needs to do on the site of which the A number is located. You can modify the current record or add a new one.

1.45.1 Modify a current record for number change announcement: MOD CNACLD: P=41, PFX=K'30166489, RSNAME="RS_259", DNCATCODE="5858"; Description: if you could find the full number analysis by the CNACLD command, you need to change its RSNAME (route select name) to the route which leads to the CTA_02, and add the DNCATCODE to 5858. P (V): It specifies the A number’s local DN set, this value must equal to the area code of the A number. PFX (V): It specifies the exact A number’s analysis prefix, this value must equal to the A number. Copyright by Huawei

- 60 -



RSNAME (V): It specifies the route select name lead to the CTA_02 which connect to the announcement equipment. All the RSNAME for each site you could get from the table below: Site

RSNAME

SPO

RS_209

RJO

RS_259

CTA

RS_259

MGA

RS_209

BHE

RS_209

RCE

RS_259

DNCATCODE (V): It specifies the A number’s number Category code, this value must equal to 5858.

1.45.2 Add a new record to apply a number change announcement: ADD CNACLD: P=41, PFX=K'30166489, CSTP=BASE, RSNAME="RS_259", MINL=8, MAXL=8, ISERVICECHECKNAME="INVALID", NUMNAME="INVALID", CHRGNAME="INVALID", DNCATCODE="5858"; Description: if you could not find the full number analysis by the CNACLD command, you need to add the full number use ADD CNACLD. P (V): It specifies the A number’s local DN set, this value must equal to the area code of the A number. PFX (V): It specifies the exact A number’s analysis prefix, this value must equal to the A number. RSNAME (V): It specifies the route select name lead to the CTA_02 which connect to the announcement equipment. All the RSNAME for each site you could get from the table below: Site

RSNAME

SPO

RS_209

RJO

RS_259

CTA

RS_259

MGA

RS_209

BHE

RS_209

RCE

RS_259

MINL (V): This parameter specifies the minimum number length of the A number with the specific call prefix, this value must equal to the length of the A number. MAXL (V): This parameter specifies the maximum number length of the A number with the specific call prefix, this value must equal to the length of the A number. DNCATCODE (V): It specifies the A number’s number Category code, this value must equal to 5858. The other parameter in this command you do not need to change. Copyright by Huawei

- 61 -



2 Configuration According to the Class of Service (NCOS) 2.1 General Rules: The configuration of the class of service (NCOS) is only done at ATS side. About HSS, ENS and UGC, the provisioning commands keeps the same. Please refer to the ADD command in the Chapter 1. When adding a subscriber, four parameters need special attention, as below: Call Source code (CSC): It defines the source of the call. In IMS, we use this to identify which location this subscriber belongs to. Subscribers with different call sources cannot do local calls to each other. Local DN Set (LP): It defines the dialing plan and rules for each are code (AC). Call sources from different local areas shares the same Local DN set, but the local calls to different areas are blocked by ATS through CNL control. Restriction (Barring) Group (LMTGRP): It defines the outgoing call barring profile. Subscribers that have this parameter configured have restriction to make calls according to a standard defined by NCOS values. For example Subscribers that has NCOS 2 (block LDN, LDI) must be configured with parameter LMTGRP=2. ENUM Index (ENUMIDX): It defines the number change profile. Subscribers that have this parameter configured can have changes in calling or called number according to a standard defined by NCOS values. For example, subscribers that has NCOS 15 (easy call) must be configured with parameter ENUMIDX=15. Below is the current call source information for normal subscribers (NCOS 1) for the six sites (from table GVT IMS Location Info v1.3.xls). IMPORTANT: This information is based on the current cities that will be implemented. New cities / location can be implemented in the future, so in this case this table will be feed with new values. Table 1 – Call source definition for all the cities IMS

Location

City Code

CNL

AC

SPO7

SAO PAULO ARUJA BARUERI BIRITIBA-MIRIM CAIEIRAS CAJAMAR CARAPICUIBA COTIA DIADEMA EMBU EMBU-GUACU FERRAZ DE VASCONCELOS FRANCISCO MORATO FRANCO DA ROCHA GUARAREMA GUARULHOS ITAPECERICA DA SERRA ITAPEVI ITAQUAQUECETUBA

SPO AUJ BRE BMM CER CJR CIV COA DDA EMB EBG FAV FAT FCR GRM GRS ICS ITE IAQ

11000 11048 11071 11082 11130 11132 11151 11176 11185 11202 11203 11220 11229 11227 11251 11892 11291 11294 11300

11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

Copyright by Huawei

Tariff Location Area Info in HSS

- 62 -

11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

SPO_ AUJ_ BRE_ BMM_ CER_ CJR_ CIV_ COA_ DDA_ EMB_ EBG_ FAV_ FAT_ FCR_ GRM_ GRS_ ICS_ ITE_ IAQ_

Location Index in CallSRC LDNSET ATS 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11 1101 1101 11


RJO6

CTA7

MGA4

RCE3

BHE4

JANDIRA JUQUITIBA MAIRIPORA MAUA MOGI DAS CRUZES OSASCO PIRAPORA DO BOM JESUS POA RIBEIRAO PIRES RIO GRANDE DA SERRA SALESOPOLIS SANTA ISABEL SANTANA DE PARNAIBA SANTO ANDRE SAO BERNARDO DO CAMPO SAO CAETANO DO SUL SAO LOURENCO DA SERRA SUZANO TABOAO DA SERRA VARGEM GRANDE PAULISTA RIO DE JANEIRO NITERÓI BELFORD ROXO DUQUE DE CAXIAS NOVA IGUAÇU CURITIBA ARAUCARIA CAMPO LARGO PINHAIS PIRAQUARA SAO JOSE DOS PINHAIS ALMIRANTE TAMANDARE COLOMBO FAZENDA RIO GRANDE CAMPO MOURAO CIANORTE MARIALVA MARINGA PAICANDU PARANAVAI SARANDI UMUARAMA RECIFE JABOATAO DOS GUARARAPES OLINDA PAULISTA CAMARAGIBE CABO DE SANTO AGOSTINHO BELO HORIZONTE BETIM CONTAGEM

JAD JQB MAR MAU MCZ OCO PPJ POA RPS RGS SEP SBL SPB SNE SBO SCN SALS SZN TBS VPA RJO NRI BERO DQX NIU CTA AUC CLG PNIS PQA SJP ATT CBX FZR CPM CNE MRV MGA PNU PVA SWW UMR RCE JBO OLD PUI CGB CBO BHE BET CEM

11318 11330 11358 11370 11381 11425 11480 11488 11528 11964 11582 11623 11589 11633 11548 11550 11564 11641 11644 12210 21000 21188 21037 21088 21199 41000 41049 41119 41486 41495 41585 41015 41161 41919 41122 41151 41382 41389 41447 41466 41628 41711 81000 81083 81103 81115 81200 81029 31000 31085 31856


11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 21 21 21 21 21 41 41 41 41 41 41 41 41 41 44 44 44 44 44 44 44 44 81 81 81 81 81 81 31 31 31

11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 21 21 21 21 21 412 412 412 412 412 412 412 412 412 448 447 442 442 442 444 442 446 812 812 812 812 812 812 31 31 31

JAD_ JQB_ MAR_ MAU_ MCZ_ OCO_ PPJ_ POA_ RPS_ RGS_ SEP_ SBL_ SPB_ SNE_ SBO_ SCN_ SALS SZN_ TBS_ VPA_ RJO_ NRI_ BERO DQX_ NIU_ CTA_ AUC_ CLG_ PNIS PQA_ SJP_ ATT_ CBX_ FZR_ CPM_ CNE_ MRV_ MGA_ PNU_ PVA_ SWW_ UMR_ RCE_ JBO_ OLD_ PUI_ CGB_ CBO_ BHE_ BET_ CEM_

1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 2101 2101 2101 2101 2101 4102 4102 4102 4102 4102 4102 4102 4102 4102 4408 4407 4402 4402 4402 4404 4402 4406 8102 8102 8102 8102 8102 8102 3101 3101 3101

1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 1101 2101 2101 2101 2101 2101 4102 4102 4102 4102 4102 4102 4102 4102 4102 4408 4407 4402 4402 4402 4404 4402 4406 8102 8102 8102 8102 8102 8102 3101 3101 3101

11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 21 21 21 21 21 41 41 41 41 41 41 41 41 41 44 44 44 44 44 44 44 44 81 81 81 81 81 81 31 31 31

2.2 List of NCOS Below is a list with the current NCOS implemented on IMS, with description of each service function. IMPORTANT: For NCOS used for VoIP services (Always local, Vox3G, VoxIP, 9x), there is also a new procedure. These services will be explained in a separated document that will be provided after the homologation phase of this solution. Copyright by Huawei

- 63 -



Table 2 – NCOS definition 1 2 3 4 15 16 17

Barring Group 65534 2 3 4 65534 65534 17

Enum Index 65535 65535 65535 65535 15 16 65535

19

65534

19

20 21 22 23 24

20 21 22 23 24

65535 65535 65535 65535 65535

25

65534

25

30

65534

30

31

65534

31

32

65534

32

33 34 41

65534 65534 41

33 34 65535

71

71

65535

72

72

72

NCOS

Call Source

Refer to Table 1

Description Liberado TOTAL Bloqueio do DDD 025 e DDI 0025, para outras operadoras pode fazer Bloqueio do 0300; 0500; 0900 Bloqueio do DDD 025; DDI 0025; 0300; 0500; 0900 Assinante disca sem CSP para DDD (todos) e DDG, após é inserido CSP 25 (ligue fácil) Transforma CSP todas as regiões; CSP a cobrar para todos e CSP todos os paises em 025 Liberado somente para 0800 e 000x (prefixo Webline local) Transforma CSP DDD todas as regiões e CSP todos os paises em CSP 25. Nos casos de chamadas a cobrar é considerado o CSP originalmente discado pelo cliente Liberado Chamadas locais ( 2 até 6 ) e 078 – TRANSMIT Bloqueio para celular 7; 8; 91 a 99 Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99 Bloqueio para celular 7; 8; 91 a 99; 0300;; 0500; 0900 Bloqueio do DDD 025; DDI 0025 e para celular 7; 8; 91 a 99; 0300; 0500; 0900 Liberado somente 11x; 190 e 193; 080005xxxxx; caso assinante tente ligar é transferido para 08006001325 Igual NCOS 19 xxx_POS mais acesso internacional 100% liberado (não transforma csp pra internacional) Igual NCOS 16 xxx_POS mais acesso internacional 100% liberado (não transforma csp pra internacional) Igual NCOS 1 xxx_POS mais acesso internacional 100% liberado (não transforma csp pra internacional) Igual NCOS 1 – Corporativos PBXRAMAL + 100% LDI Liberado Igual NCOS 16– Corporativos PBXRAMAL + 100% LDI Liberado Bloqueio para celular 7; 8; 91 a 99 - Corporativos PBXRAMAL com TIC - CLISERV 1041 Limitador Smart Credits para assinantes com NCOS 1: Bloqueio de VC1 + VC2 e VC3 com CSP 25 Limitador Smart Credits para assinantes com NCOS 15: Bloqueio de VC1 + VC2 e VC3 com CSP 25

2.3 Commands for provisioning 2.3.1 NCOS 1 USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534, ENUMIDX=65535; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the call source according the “Table 1”.

2.3.2 NCOS 2 USE ME: MENAME=ATS; MOD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=2, ENUMIDX=65535; Copyright by Huawei

- 64 -



MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the call source according the “Table 1”.

2.3.3 NCOS 3 USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=3, ENUMIDX=65535; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the call source according the “Table 1”.

2.3.4 NCOS 4 USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=4, ENUMIDX=65535; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the callsource according the “Table 1”


2.3.6 NCOS 16 USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534, ENUMIDX=16; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the callsource according the “Table 1” Copyright by Huawei

- 65 -







2.3.11 NCOS 22 USE ME: MENAME=ATS; Copyright by Huawei

- 66 -



ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=22, ENUMIDX=65535; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the callsource according the “Table 1”



2.3.14 NCOS 25 USE ME:MENAME=HSS; ADD HSIFC:IMPU="sip:[email protected]", SIFCID=625; USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534, ENUMIDX=25; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the call source according the “Table 1”

2.3.15 NCOS 30 USE ME: MENAME=ATS; Copyright by Huawei

- 67 -



ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534, ENUMIDX=30; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Where : XX is the local DN set, YYYY is the callsource according the “Table 1”




2.3.19 NCOS 34 USE ME: MENAME=ATS; ADD SBR:IMPU="sip:[email protected]",LP=XX,CSC=YYYY, TEMPLATEIDX=1, LMTGRP=65534, ENUMIDX=34; MOD SS:IMPU="sip:+ [email protected]",NSCLIP=1,NSSCCA=1; Copyright by Huawei

- 68 -



Where : XX is the local DN set, YYYY is the callsource according the “Table 1”




2.4 General Blocking for Retail Subscribers 2.4.1 xxxBIO Block /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; ADD HSIFC: IMPU=" sip:[email protected] ", SIFCID=629; USE ME: MENAME=ATS; Copyright by Huawei

- 69 -



MOD SBR:IMPU="sip:[email protected]", OUTRST=NO, INRST=YES, LMTGRP=9001; MOD SS:IMPU="sip:[email protected]", NSSCCA=0;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). • ADD HSIFC:IMPU="sip:[email protected]", SIFCID=629;

Description (V): Add a shared initial filter criteria (iFC) set for the specified IMPU. Each IMPU can be configured with a maximum of eight shared iFC sets. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values: 1 - For intra-office traffic, used for Retail and Corporate, ex: 621 7- For traffic terminated on UGC, used only for Corporate, ex: 627 8 - For traffic terminated on BCF, used only for Vox IP service, ex 628 9 - For traffic terminated on ATS, used only for General Block service, ex 629 Here an IFC set with index 629 was added to the subscriber, for the purpose of triggering the call to ATS, which the callee number is Emergency Number, and ATS analyses the callee number, decide the call will reject or not. • USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR: IMPU="sip:[email protected]", OUTRST=NO, INRST=YES, LMTGRP=9001;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. OUTRST (V): It specifies the type of the carrier-determined barring service and the outgoing call restriction status of a subscriber. If "NO" is selected, all outgoing calls of a subscriber are permitted; if "YES" selected, all outgoing calls of a subscriber are rejected. Here this parameter should be set to “NO”, because the user can make a call to some specifically numbers. INRST (V): It specifies the type of the carrier-determined barring service and the incoming call restriction status of a subscriber. If "NO" is selected, all incoming calls of a subscriber are permitted; if "YES" selected, all incoming calls of a subscriber are rejected. Here this parameter should be set to “YES”, because the user cannot receive any call. LMTGRP (V): It specifies the restriction group number of a specified subscriber. This parameter is used for the Outgoing Call Barring: Fixed (OCB-F) service. According to GVT’s requirement, for General Blocking service, this parameter should be 9001. • MOD SS:IMPU="sip:[email protected]", NSSCCA=0; Copyright by Huawei

- 70 -



Description: This command is used to modify supplementary service authority data of a subscriber. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements Supplement Service Right. Here this parameter should be set to “0”.

Unblock /****************************AT SPG web portal********************************/ USE ME:MENAME=HSS; RMV HSIFC: IMPU=" sip:[email protected] ", SIFCID=629; USE ME: MENAME=ATS; MOD SBR:IMPU="sip:[email protected]", OUTRST=NO, INRST=NO, LMTGRP=65534; MOD SS:IMPU="sip:[email protected]", NSSCCA=1;


Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Home Subscriber Server (HSS). • RMV HSIFC:IMPU="sip:[email protected]", SIFCID=629;

Description (V): Remove a shared initial filter criteria (iFC) set for the specified IMPU. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. SIFCID (V): This is an index value. GVT standard is AC+P, and P can assume the follow values. 1-For intra-office traffic, used for Retail and Corporate, ex: 621 7- For traffic terminated on UGC, used only for Corporate, ex: 627 8 - For traffic terminated on BCF, used only for Vox IP service, ex 628 9 - For traffic terminated on ATS, used only for General Block service, ex 629 Here this parameter should be the same as we added in the Block, using command ADD HSIFC. • USE ME:MENAME=ATS;

Description: Select the Managed Element (ME) to do the provisioning. In this command, it selects the Application for Telephony Services (ATS). • MOD SBR: IMPU="sip:[email protected]", OUTRST=NO, INRST=NO, LMTGRP=65534;

Description: This command is used to modify parameters on an existent subscriber. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. Copyright by Huawei

- 71 -



OUTRST (V): It specifies the type of the carrier-determined barring service and the outgoing call restriction status of a subscriber. If "NO" is selected, all outgoing calls of a subscriber are permitted; if "YES" selected, all outgoing calls of a subscriber are rejected. Here this parameter should be set to “NO”. INRST (V): It specifies the type of the carrier-determined barring service and the incoming call restriction status of a subscriber. If "NO" is selected, all incoming calls of a subscriber are permitted; if "YES" selected, all incoming calls of a subscriber are rejected. Here this parameter should set to “NO”. LMTGRP (V): It specifies the restriction group number of a specified subscriber. This parameter is used for the Outgoing Call Barring: Fixed (OCB-F) service. If the value of Restriction group is the same as the value of Restriction group defined by running ADD CLRGRP in the MML Command - ATS9900 window, the call is restricted. Here should be set as wildcard value “65534” since subscribe is unblocked. • MOD SS:IMPU="sip:[email protected]", NSSCCA=1;

Description: This command is used to modify supplementary service authority data of a subscriber. IMPU (V): The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case sensitive. Tel URI must fill the number in the format tel:+55 AC number(8 digits) Sip URI must fill the number and character in the format sip:+55 AC number(8 digits)@domain. NSSCCA (F): It specifies the Collect Call (SCCA) service right of a subscriber. This parameter is one of the elements Supplement Service Right. Here this parameter should be set as GVT’s default value “1”.

Copyright by Huawei

- 72 -

IMS - Provisioning Guide for Retail v3.1

Recommend Documents