Hydraulic Universal Testing Machine WAW-E WAW-E Series Series Compu ter-Contro ter-Contro lled Electro-hydrauli c Servo Universal Testing Machine
Ap pl ic ati on :
WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing strength. It is capable of testing the characters of materials on physical & technology properties. It is simple, easy to operate and widely used in works, laboratories and high schools for material properties research and quality control. Equipped with the computer & Software & printer, it can display, record, process and print the test results, and control test procedures as per the set program and can draw test curves automatically in real time. Ap pl ied Standar Stan dar d s:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4. Specifications: Mod el
Max. Capacity (kN) Measuring range
WAW-300E/400E
WAW-500E/600E
WAW-1000E
WAW-2000E
300/400
500/600
1000
2000
2% to 100% of rated capacity (for WAW-1000E, WAW-1000E, it is 20-1000kN)
Load accuracy (%)
±1.0/0.5
Load resolution
1/200000
Deformation accuracy (µm)
±1.0/0.5
Displacement resolution
0.001mm
Testing speed range (mm/min)
0.2-50
Crosshead moving speed (mm/min)
200
Piston stroke (mm)
250
Distance between columns (mm) Max. Tension Tension space (Including ( Including piston stroke (mm)
435x195
475x185
565x255
840x400
690
750
750
1000
Ф9-20, Ф20-32
Ф13-26, Ф26-40
Ф20-40, Ф40-60
Ф20-40, Ф40-60,Ф60-80
Flat insert (mm)
0-15
0-15, 15-30
0-30, 10-40
10-40,40-70
Max. Compression space (mm)
540
610
620
850
Φ128X30
Φ128X30
Φ148X40
Φ200X60
30-480
30-500
50-500
50-720
120
120
160
160
Round insert (mm)
Dimension of platen (mm) Span Span of bending attachment (mm) Length of roller (mm) Height of supporter of bending (mm) Computer Data Processing Power (kW)
100 100 180 180 Upper & lower yield point, Max load point, testing load of breaking point, stress, deformation, elongation rate, elastic module & Rp0.2.etc. 1.7 2.1 3 4
Power supply Dimension of load frame (mm)
380/220V, 380/220V, 3Ph, 50/60Hz 725x560x1950
Dimension of power package (mm) Weight of machine (kG)
770x600x2130
900x650x2380
1300x900x3260
550x750x1410 1300
2600
3700
8800
Hydraulic Universal Testing Machine Model WAW-F Series Computer-Controlled Hydr aulic Servo Universal Testing Machine Ap pl ic ati on :
WAW-F Series Computer-Controlled Hydraulic Servo Universal Testing Machines is designed with single workspace. It can do tension, compression, bending and shearing tests. Force measurement is through load cell. With long travel actuator stroke, it is suitable to test standard specimens, long length specimens, and specimens with large elongation. Ap pl ied stand ard s:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4.
Specification: Mod el
Max. load capacity(kN)
WAW-300F/400F
WAW-500/600F
WAW-1000F
WAW-1500F/2000F
300/400
500/600
1000
1500/2000
Accuracy of testing load (%)
±0.5/±1
Accuracy of deformation (%)
±0.5/±1
Max. Tensile space(mm)
600
610
700
720
Max. Compression space(mm)
300
300
450
500
Actuator stroke(mm)
500
500
500
600
Max. Loading speed (mm/min)
100
100
75
50
Distance between columns(mm)
520
600x330
660x450
800x450
Φ5-30
Φ13-40
Φ20-60
Φ20-80
0-15
0-30
0-40
0-60
Φ120
Φ150
Φ150/204x204
Φ200/204x204
880x630x2980
880x630x2980
980x720x3530
1220x880x4180
2500
3000
5000
8000
Round insert(mm) Flat insert(mm) Compression platens (mm) Dimensions of load frame(mm) Weight(kg)
Hydraulic Universal Testing Machine Model WAW-H Series Computer-Controlled Hydrauli c Servo Universal Testing Machine Ap pl ic ati on :
WAW-H Series Computer-Controlled Hydraulic Servo Universal Testing Machines is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing tests. Compared with E type, it is with higher stiffness and strength load frame. High performance motor mounted on side of crosshead for adjusting test space precisely, also test space can be adjusted through notched column if for special applications. It is widely used in factories, r & D institutes, laboratories and high school for material properties research and quality control. Ap pl ied stand ard s:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4.
Specification: Mod el
Max. load capacity(kN)
WAW-600H
600
Accuracy of testing load (%)
WAW-1000H
WAW-2000H
1000
2000
±0.5 from 1%-100% of FS
Accuracy of deformation (µm)
1
Max. Tensile space(mm)
750
900
1000
Max. Compression space(mm)
610
760
850
Piston stroke(mm)
250
Crosshead moving speed (mm/min)
200
Distance between columns(mm) Dia. of column (mm) Round insert(mm) Flat insert(mm) Compression platens (mm) Dimensions of load frame(mm) Weight(kg)
485x210
590x280
855x500
80
100
110
Ф13-26, Ф26-40
Ф20-40, Ф40-60
Ф20-40, Ф40-60,Ф60-80
0-15, 15-30
0-30, 10-40
10-40
Φ128X30
Φ148X40
Φ200X60
880x620x2250
980x670x2570
1350x930x3320
3200
4500
9500
Hydraulic Universal Testing Machine Model WEW-D Series Economi cal Hydraulic Universal Testing Machine Ap pl ic ati on s:
WEW-D Series Economical Hydraulic Universal Testing Machine is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing strength. It is capable of testing the characters of materials on physical & technology properties. It can be equipped with TETC220 controller or computer with software to realize the test data/curve collecting and process. Ap pl ied Stan dar d:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4
WEW-D with TETC220 cont roller
WEW-D with compu ter and softw are
Main specifications: Mod el
Max. load capacity (kN)
WEW-200/300D
WEW-400/600D
WEW-1000D
WEW-2000D
200/300
400/600
1000
2000
Load accuracy
≤1% of 2%-100% of F.S.
Displacement resolution (mm)
0.01
Max. tensile space (mm)
700
800
850
900
Compression space (mm)
700
800
850
900
Clearance between columns (mm)
500
570
610
570
Piston stroke (mm)
250
250
250
250
0-150
0-100
0-80
0-50
Crosshead moving speed
( mm/min)
Load measuring mode Clamping jaws for round specimens (mm)
Oil Transducer/Load cell Ф10-20, Ф20-32
Ф13-26, Ф26-40
Ф13-35, Ф35-55
Ф25-45, Ф45-70
0-15
0-15
0-40
0-50
75
82
82
140
Ф120x25
170x170x25
204x204x30
Ф300
Roller diameter of bending fixture (mm)
30
50
50
50
Max. clearance between supports (mm)
450
360
360
600
Diameter of punch tops (mm)
30
30
30
30
Power
2kW, 380V,3ph
2.2kW, 380V,3ph
3kW, 380V,3ph
5.5kW, 380V,3ph
Load frame dimension (mm)
800x500x1980
950x640x2500
980x650x2500
1200×850×2900
2000
2500
3300
5500
Clamping jaws for flat specimens (mm) Width of clamping jaws (mm) Compression plate dimension (mm)
Weight (kg)
Hydraulic Universal Testing Machine HLC Series Compact Servo Contr olled Hydraulic Universal Testing Machine Ap pl ic ati on :
HLC Series Compact Servo Controlled Hydraulic Universal Testing Machine has compact design with powerful functions. It can do tensile, compression, bending, shearing, hardness and low cycle test for metal and non-metallic materials. Ap pl ied stand ard s:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4.
Specifications:
Model
HLC-50
HLC-100
HLC-150/200
HLC-300
Max. Load(KN)
50
100
150/200
300
Stiffness (kN)
50
100
150/200
300
Load accuracy (%)
±0.5%/ ±1%
Tensile space(mm)
350
400
Piston stroke(mm)
200
250
Load speed(mm/min)
0.5-100
Return speed(mm/min)
100
Compression space (mm)
635
850
Distance between columns (mm)
360
400
Tensile grip
(mm)
Round: Ø4-20, Flat: 0-21
Compression platen (mm) Dimensions (mm) Net weight (kg)
180
Round: 9-26; Flat: 0-21 Round: 9-30 Flat: 0-28
Ø100
Ø150
750x510x1610
850 x550 x1800 200
300
Hydraulic Universal Testing Machine Testing Fixtures fo r Different Tests
Hydraulic Universal Testing Machine Controllers: There are three kinds of controllers to meet different applications: l
PCI card.
It is self-developed & most advanced card for testing machine to realize the functions of real time data collection, communication, measuring and control etc. according to related ASTM, ISO standards. It can be inserted PCI slot of computer and connected with testing machine by data cable, then above functions can be done easily. Effective sampling rate can be up to 50Hz, in addition, the different versions for sampling rate of 200Hz, 500Hz and 10 kHz are available as options to meet special test requirements. Besides applying for static tests, such card with related configuration is also able to be utilized for low cycle dynamic fatigue test up to 6Hz.
l
Full digital controller
It is super smart test instrument developed for both simple & complex tensile and compression testing of metallic & non-metallic materials. The MaxTC controller, as a result of applying of the advanced technology, refined design and elaborate units, is of quite precision of test, accurate identification’s capability and convenience of operation. Effective sampling rate can be up to 50Hz, also, special controller with 10 kHz sampling rate is available as options according to special requirements. Digital, LED and touch screen can be selectable for both economical type and high configuration testing machines. Three or more channels for load, displacement, extension and others can be configured with this controller to meet the different test requirements.
l
EDC contro ller
EDC controller is imported from Germany and widely used for testing machine with high configuration or requirements, it features as stable control, high accurate measuring and high sampling rate (1kHz~5kHz) etc. also, it can self-identify & self-calibration functions. Up to now, it is most reliable device to be used extensively for static and dynamic testing machines.
Hydraulic Universal Testing Machine Specifications: l
Interface processor AMD 520, 133MHz
l
Load resolution ±180,000 steps, two ranges 2mV/V and 4mV/V
l
Date sampling frequency: 1kHz for EDC220, 5kHz for EDC580
l
RS485 interface for external keyboard/display, supports a maximum of four devices
l
Drive interface ±10V (16bit) analogue command output, digital command output and safety functions
l
PC communication via USB or Ethernet Two I2-Bus-Extension-Slots
l
Internal socket for serial sensors (COM 1)
l
Internal socket for debug (COM 2)
l
Internal socket for synchronizing several EDCs
l
Internal socket for servo valve amplifier
Extensometers: Extensometers including non-contact video & laser extensometer and contact type & full automatic extensometers are available to meet different kinds of test requirements. We are the exclusive agent of Epsilon in China, who is expert in extensometer and remarkable brand in the world. Please see the following types available.
Non-contact Video extensometers:
Non-contact Laser extensometers:
Contact Type Full Aut omatic Extensometers:
Standard Axial & Transverse Extensometers:
Long travel extensometer
Hydraulic Universal Testing Machine Being Exclusive Agent of Epsilon' s Extensometer in China Epsilon's extensometers:
Axial Ext ens ometers
High Temperature Axial Extensometers
Transverse & Diametral Extensometers
Fractur e Mechanical Clip-on Extensom eters
Rock, Concrete and Asphalt Extensometers
Calib rator s
