HW-196379

Catalogue 2012

Huawei Antenna & Antenna Line Products Catalogue

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Antenna & Antenna Line Products Catalogue >>

Huawei Network Antenna Huawei: MBB Era Network Antenna Expert Huawei has been involved in mobile communications for more than 20 years. For 17 years, Huawei has designed base station (BTS) antennas with some 300 experts and engineers in five R&D centers based in China, Germany, Canada and the US. Huawei has been awarded more than 100 BTS antenna patents and has membership in more than 50 standardization organizations. Thanks to Huawei's experience as well as its industry-leading network designs, performance simulation platforms, and precise 3D spherical antenna near-field testing system, Huawei is capable of providing network antennas with optimal network performance.

Industry-Leading Antenna Solutions •• Antennas for Optimal Network Performance Huawei is a pioneer in designing antenna for better network performance. All antennas are analyzed and optimized using network simulation systems. This makes it possible for Huawei antennas to provide enhanced network performance (10% better than traditional antennas). • Supporting Full Range of Frequency Bands and Reducing TCO Huawei provides more than 100 types of mainstream antennas covering frequency ranges from 790 MHz to 2690 MHz, with support from single band to penta-band. Huawei's antennas lead the industry in terms of width, weight, wind load and "green upgrade" support to minimize tower modernization costs and rental fees. • Easy Maintenance for Reducing OPEX Huawei's EasyRET solution (internal RCU ) for antennas eliminates extra sites visit due to incorrect installation and shortens installation time by 95%. Internal RCU improves reliability while reducing RCU maintenance costs by 80%. Imbedded RCU software requires no configuration, and improves service provisioning efficiency by approximately 95%. • Flexible MIMO Configurations Flexible configurations are available for multi-band (1800 MHz/2100 MHz/2600 MHz) for LTE in 2T2R\2T4R\4T4R. One-time deployment supports long term evolution. • Supporting Evolution to AAS Integrating antennas with RF components, Huawei provides an industry-leading active antenna system (AAS) to handle dynamic capacity requirements. • High-Performing TMA and Easy O&M Huawei TMA has many advantages, like low insertion loss, low PIM and small noise figure. Huawei is also the only vendor in the world to provide remote gain control as well as electrical labeling (essential to TMA asset management). Huawei is committed to improving its customers' communications capacities over the long-term. We look forward to cooperating with you in delivering optimal network performance using our antenna solutions.


Huawei's SG128 spherical near field testing system - the world's most advanced antenna testing system: •• High-performing ultra-broadband dual-polarization probes •• Five-axis precision turret for military use (can be rotated with 0.01 degree precision) •• Albatross high-performing shielded room from Germany •• AEMI radar absorbing materials from the US •• Precise and stable equipment imported from industry-leading countries •• Infrared laser for calibration and dedicated installation support •• Full series of installation poles •• Industry-leading temperature control technology


Huawei Antenna Test Standard Type

Reference

Method

Condition

Duration

Parameters Tested

Low Temperature Exposure

ETSI 300 019－2－4 IEC 60068－2－1

-55℃

16h

Visual/physical exam VSWR ISO and PIM (pre and post)

High Temperature Exposure

ETSI 300 019－2－4 IEC 60068－2－2

+70℃

16h


Temperature Cycling

ETSI 300 019－2－4 IEC 60068－2－14

-55ºC/+70ºC

5cycles,50h


Humidity

ETSI 300 019－2－4 IEC 60068－2－30

+25ºC/+55ºC @ 95% RH

10cycles,240h


Wind Loading

ETSI 300 019－2－4

IEC 721－3－4

Simulated constant force of Visual/physical exam VSWR 3surfaces,144h 200 km/h wind ISO and PIM (pre and post)

Vibration

ETSI 300 019－2－4 IEC 60068－2－6

sinusoidal 6.15mm,10m/ s2,2-9HZ 9HZ-200HZ

3axes×5 sweep cycles


Transportation Vibration

ETSI 300 019－2－4 IEC 60068－2－64

Truck level 3

3 axes,90min


Shocks(without package)

ETSI 300 019－2－4 IEC 60068－2－27 300 m/s2,6ms pulse width

72s


shocks (with package)

ETSI 300 019－2－2 IEC 60068－2－27 300 m/s2,6ms pulse width

72s


Drop (with package)

ETSI 300 019－2－2

6surfaces/4Angles/3Edges

13 drops


0.067m3/min,5r/min

2h


ISO 12048

Rain ETSI 300 019－2－4 IEC 60068－2－18 (in water chamber) Wind Driven Rain

GR－487－CORE

MIL－STD－810 Method 506.3

150mm/h,31m/s,0.5mm4.5mm,45°

4surfaces,more Visual/physical exam VSWR than 120min ISO and PIM (pre and post)

Salt Fog (Continuous)

ETSI 300 019－2－4 IEC 60068－2－11

5%NaCl mist @+40ºC

1000h


Salt Fog (Cyclic)

ETSI 300 019－2－4 IEC 60068－2－52

5%NaCl mist @+15/+40ºC,93% RH

10 cycles,240h


Solar (UV) Exposure

ETSI 300 019－2－4 IEC 60068－2－5

1120W/s2 @+40ºC

24h/ cycle,56days


Dust and sand

ETSI 300 019－2－4 IEC 60068－2－68

150um-850um,1g/m3,20m/ s @+70ºC,RH<30%

8h



Contents Product Portfolio A. Huawei Network Antennas A－1. Single Band Antennas A－2. Dual-band Antennas A－3. Triple-band Antennas A－4. Quad-band Antenna A－5. WIMAX, LTE Antennas A－6. Cluster Antenna

B. Antenna Line Products B－1. Dual Tower Mounted Amplifiers (DTMA) B－2. Combiners

C. Accessories for RET Systems C－1. Remote Control Unit (RCU) C－2. Bias Tee (BT) C－3. Smart Bias Tee (SBT) C－4. AISG Connecting Cables

D. Mounting Instructions D－1. Antenna Installation Guide D－2. DTMA Installation Guide D－3. Combiner Installation Guide D－4. RCU Installation Guide D－5. BT Installation Guide D－6. SBT Installation Guide

ⅰ

ts

en

nt Co


Index A. Huawei Network Antennas A－1. Single Band Antennas Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

Gain (dBi)

Electrical Tilt downtilt (°) Method

450－470

x

360

9

0

FET

450－470

x

65

15

0

FET

790－960

x

65

15

0－14

MET

790－960

x

65

16.5

0－12

MET

790－960

x

65

17

0

FET

790－960

x

65

17

3

FET

790－960

x

65

17

6

FET

790－960

x

65

17.5

0－10

MET

790－960

x

65

18

0

FET

790－960

x

65

18

3

FET

806－960

x

65

15

0

FET

806－960

x

65

15

6

FET

806－960

x

65

15

3

FET

806－960

x

65

15.3

0

FET

806－960

x

65

15.3

6

FET

806－960

x

65

17

0

FET

806－960

x

65

17

3

FET

806－960

x

65

17

3

FET

806－960

x

90

17

0

FET

806－960

x

90

17

2－9.5

MET

806－960

x

65

17.5

2－9.5

MET

806－960

x

65

18

0

FET

806－960

x

65

18

3

FET

806－960

x

65

18

6

FET

Connector

1 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female

Dimension (mm)

Model

Page

Φ52 x 3316

A45VP0900

2

2042 x 486 x 98

A45451500

3

1356 x 259 x 135 **A79451500v01

4

1936 x 259 x 135

A79451600v01

5

1936 x 260 x 135

A90451702v01

7

1936 x 260 x 135

A90451705v01

9

1936 x 260 x 135

A90451709

11

2535 x 259 x 135

A79451700v01

13

2535 x 259 x 135

A90451802v01

15

2535 x 259 x 135

A90451805v01

17

1322 x 289 x 85

A90451500

19

1322 x 289 x 85

A90451501

20

1322 x 289 x 85

A90451505

21

1312 x 295 x 126

A90451502

22

1312 x 295 x 126

A90451503

23

1932 x 289 x 85

A90451700

24

1932 x 289 x 85

A90451705

25

2526 x 268 x 125

A90451706

26

2526 x 268 x 125

A90451600

28

2526 x 268 x 125

A90451704

29

2515 x 289 x 85

A90451701

30

2572 x 289 x 85

A90451800

31

2572 x 289 x 85

A90451805

32

2572 x 289 x 85

A90451801

33

ⅱ

In

de

x

** Preliminary Issue


Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

Gain (dBi)


806－960

x

65

18.2

6

FET

1710－2170

x

90

17

2－10

MET

1710－2170

x

90

17

0

FET

1710－2170

x

90

17

3

FET

1710－2170

x

65

18

2

FET

1710－2170

x

33

21

2－10

MET

1710－2170

x

33

21

0

FET

1710－2170

x

65

21

0

FET

1710－2170

x

65

21

2

FET

1710－2200

x

65

15.5

0－12

MET

1710－2200

x

65

15.5

3

FET

1710－2200

x

65

15.5

6

FET

1710－2200

x

65

18

0－10

MET

1710－2200

x

65

18

0－10

IRET

1710－2200

x

65

18

0

FET

1710-－2200

x

65

18

3

FET

1710－2200

x

65

18

6

FET

1710－2200

x

65

19.5

0－6

MET

1710－2690

x

65

18

0－10

MET

1710－2690

x

65

18

0－12

IRET

1710－2690

x

65

19.5

0－6

MET

Connector

2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female

Dimension (mm)

Model

Page

2532 x 295 x 126

A90451804

34

1306 x 155 x 79

A19451703

35

1306 x 155 x 79

A19451704

36

1306 x 155 x 79

A19451705

38

1306 x 155 x 79

A19451801

40

1318 x 289 x 85

A19452101

41

1318 x 289 x 85

A19452102

42

2170 x 155 x 79

A19452100

43

2170 x 155 x 79

A19452103

44

730 x 155 x 89

**A19451505

45

702 x 155 x 89

A19451601

46

702 x 155 x 89

A19451602

48

1315 x 155 x 89

A19451811

50

1315 x 155 x 89

**A194518R0

52

1311 x 155 x 89

A19451800v01

54

1311 x 155 x 89

A19451810v01

56

1311 x 155 x 89

A19451802v01

58

1954 x 155 x 89

A19451902

60

1410 x 155 x 89

A26451800

62

1425 x 155 x 89

**A264518R0

64

1932 x155 x 89

A26451900

66

Dimension (mm)

Model

Page

1990 x 259 x 135

**ADU4516R0

68

2565 x 259 x 135

**ADU4517R0

70

1360 x 259 x 135

ADU451503

72


A－2. Dual-band Antennas Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

790－862/ 880－960 790－862/ 880－960 790－960/ 1710－2180 ** Preliminary Issue

Gain (dBi)

xx

65/65

16/16.5

xx

65/65

17/17.5

xx

65/65

14/17


0－12/ 0－12 0－10/ 0－10 0－14/ 0－10

IRET IRET MET

Connector

4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female

x

de

In ⅲ



790－960/ 1710－2180 790－960/ 1710－2180 790－960/ 1710－2180 790－960/ 1710－2180 790－960/ 1710－2180 790－960/ 1710－2690 790－960/ 1710－2690 824－960/ 1710－2170 824－960/ 1710－2170 824－960/ 1710－2170 824－960/ 1710－2170 824－960/ 1710－2170 824－960/ 1710－2170 1710－2200/ 1710－2200 1710－2200/ 1710－2200 1710－2200/ 1710－2200 1710－2690/ 1710－2690 1710－2690/ 1710－2690 1710－2690/ 1710－2690

Gain (dBi)

xx

65/65

16/18.5

xx

65/65

16/18.5

xx

65/65

17/18.5

xx

65/65

17/18.5

xx

65/65

17/18.5

xx

65/65

16/18.5

xx

65/65

17/18.5

xx

65/65

15/18

xx

65/65

15/17.5

xx

65/65

16/17.5

xx

65/65

16/18

xx

65/65

17/17.5

xx

65/65

17.5/18

xx

65/65

18/18

xx

65/65

18/18

xx

65/65

19.5/19.5

xx

65/65

18/18

xx

65/65

16/16.5

xx

65/65

19.5/19.5


0－12/ 0－8 0－12/ 0－8 0－10/ 0－8 0－10/ 0－8 0－10/ 0－8 0－10/ 0－8 0－10/ 0－8 0－14/ 0－8 0－14/ 0－8 0－8/ 0－8 0－8/ 0－8 0－8/ 0－8 0－10/ 0－8 0－10/ 0－10 0－10/ 0－10 0－6/ 0－6 0－10/ 0－10 0－12/ 0－12 0－6/ 0－6

Dimension (mm)

Model

Page

1936 x 259 x 135

ADU451602v01

74

1940 x 259 x 135

**ADU4518R3

76

2535 x 259 x 135

ADU451807v01

78

2535 x 259 x 135

**ADU4518R0

80

2535 x 259 x 135

**ADU4518C0

82

1995 x 298 x 148

**ADU451604

83

2598 x 298 x 148

**ADU451712

84

1390 x 368 x 99

ADU451815

85

1390 x 368 x 99

ADU451707

87

1925 x 368 x 99

ADU451811

89

1925 x 368 x 99

ADU451806

91

2449 x 368 x 99

ADU451700

93

2449 x 368 x 99

ADU451801

95

1315 x 323 x 89

ADU451819

97

1315 x 323 x 89

**ADU4518R1

99

1954 x 323 x 89

ADU451902

101

1410 x 299 x 89

ADU451816

103

1425 x 323 x 89

**ADU4518R6

105

1930 x 299 x 89

ADU451901

107

Connector

Dimension (mm)

Model

Page

IRET

6 x 7/16 DIN Female

2065 x 298 x 148

**ATR4518R2

109

MET

6 x 7/16 DIN 1454 x 259 x 135 Female

ATR451500

111

MET

6 x 7/16 DIN 2098 x 259 x 135 Female

ATR451602v01

113

MET IRET MET IRET MET MET MET MET MET MET MET MET MET MET IRET MET MET IRET MET

Connector

4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 2 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female 4 x 7/16 DIN Female


A－3. Triple-band Antennas Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

790－862/ 880－960/ 1710－2690 790－960/ 1710－2180/ 1710－2180 790－960/ 1710－2180/ 1710－2180

Gain (dBi)

xxx

65/65/65

15.5/16/18.5

xxx

65/65/65

15/15/15

xxx

65/65/65

16/16/16


0－10/ 0－10/ 0－8 0－14/ 0－14/ 0－14 0－12/ 0－12/ 0－12

ⅳ

In

de

x




790－960/ 1710－2180/ 1710－2180 790－960/ 1710－2180/ 1710－2180 790－960/ 1710－2180/ 1710－2180 790－960/ 1710－2690/ 1710－2690 824－960/ 1710－2170/ 1710－2170 824－960/ 1710－2170/ 1710－2170 1710－2690/ 1710－2170/ 2490－2690

Gain (dBi)

xxx

65/65/65

16/16/16

xxx

65/65/65

17/17/17

xxx

65/65/65

17/17/17

xxx

65/65/65

16/18.5/18.5

xxx

65/65/65

16.5/16.5/16

xxx

65/65/65

17.5/17.5/17

xxx

65/65/65

18/18/18


0－12/ 0－12/ 0－12 0－10/ 0－10/ 0－10 0－10/ 0－10/ 0－10 0－10/ 0－8/ 0－8 0－8/ 0－8/ 0－8 0－8/ 0－8/ 0－8 0－10/ 0－10/ 0－10

Connector

Dimension (mm)

Model

Page

IRET

6 x 7/16 DIN 2100 x 259 x 135 Female

**ATR4516R0

115

MET

6 x 7/16 DIN 2685 x 259 x 135 Female

ATR451704v01

117

IRET

6 x 7/16 DIN 2685 x 259 x 135 Female

**ATR4517R0

119

IRET

6 x 7/16 DIN 1950 x 349 x 148 Female

**ATR4518R4

121

MET

6 x 7/16 DIN Female

1925 x 368 x 99

ATR451601

123

MET

6 x 7/16 DIN Female

2449 x 368 x 99

ATR451703

125

IRET

6 x 7/16 DIN Female

1410 x 323 x 89

**ATR4518R3

127

Connector

Dimension (mm)

Model

Page

**AQU4518R0

129


A－4. Quad-band Antenna Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

790－960/ 1710－2690/ 1710－2170/ 2490－2690

xxxx

65/65/65/65

Gain (dBi)

16/18.5/ 18/18


0－10/ 0－8/ 0－8/ 0－8

IRET

8 x 7/16 DIN 1990 x 349 x 148 Female


A－5. WIMAX, LTE Antennas Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

Gain (dBi)


Connector

Dimension (mm)

Model

Page

2300－2700

x

60

18

2－10

MET

2 x N－50KF

1060 x 155 x 79

A25451804

131

2300－2700/ 2300－2700

xx

65/65

18/18

2－10

MET

4 x N－50KF

1060 x 289 x 85

A25451803

132

Connector

Dimension(mm)

Model

Page

6 x 7/16 DIN Female

1425 x Φ 236

**A264518S0

133

A－6. Cluster Antenna Frequency 3dB Horizontal Polarization Range (MHz) beam width (°)

1710－2690 ** Preliminary Issue

x

65

Gain (dBi)

18


0－10

MET

x

de

In ⅴ


B. Antenna Line Products B－1. Dual Tower Mounted Amplifiers (DTMA) Frequency Range (MHz)

Description

AISG type

Gain (dB)

RX : 832－862

AISG v1.1

8－16 (0.5 dB Step)

TX : 791－821

AISG v2.0

8－16 (0.5 dB Step)

RX : 880－905

AISG v1.1

8－16 (0.5 dB Step)

TX : 925－950

AISG v2.0

8－16 (0.5 dB Step)

RX : 880－915

AISG v1.1

8－16 (0.5 dB Step)

TX : 925－960

AISG v2.0

8－16 (0.5 dB Step)

RX: 890－915

AISG v1.1

8－16 (0.5 dB Step)

TX: 935－960

AISG v2.0

8－16 (0.5 dB Step)

RX: 1710－1785

AISG v1.1

12

TX: 1805－1880

AISG v2.0

12

2100 12dB AISG1.1 2100 12dB AISG2.0

RX : 1920－1980

AISG v1.1

12

TX : 2110－2170

AISG v2.0

12

2600 12dB AISG1.1 2600 12dB AISG2.0

RX : 2500－2570

AISG v1.1

12

TX : 2620－2690

AISG v2.0

12

DD800 8－16dB AISG1.1 DD800 8－16dB AISG2.0 E900 SUBBAND 8－16dB AISG1.1 E900 SUBBAND 8－16dB AISG2.0 E900 8－16dB AISG1.1 E900 8－16dB AISG2.0 P900 12dB 8－16dB AISG1.1 P900 12dB 8－16dB AISG2.0 1800 12dB AISG1.1 1800 12dB AISG2.0

Dimension (mm)

Model

Page

190 x 240 x 120

ATA801100 ATA802000

135

198 x 308 x 70.5

ATA901102 ATA902002

138

248 x 324 x 75.5

ATA901101 ATA902001

141

198 x 308 x 70.5

ATA901103 ATA902003

144

160 x 220 x 100

ATA181101 ATA182001

147

160 x 205 x 54.5

ATA211101 ATA212001

150

160 x 210 x 54.5

ATA261100 ATA262000

153

B－2. Combiners Pass Band (MHz) Band 1 : 698－960 Band 2 : 1710－2700 Band 1 : 790－1880 Band 2 : 1920－2200 Band 1 : 790－862 Band 2 : 880－960 Band 1 : 1710－1880 Band 2 : 1920－2200 Band 1 : 1710 - 1880 Band 2 : 1920－2200 Band 1 : 1710－1880 Band 2 : 1920－2200

Max. Input power (W)

DC-Bypass

Intermodulation (dBm)

Dimension (mm)

Model

Page

300 300

1710－2700MHz DC-bypass

< -117

Double Unit: 130 x 190 x 105

ACOMD2H00

156

300 300


< -110


**ACOMD2H02

159

200 200


< -117


ACOMD2H04

162

300 300


< -117


ACOMD2H05

165

< -117


ACOMD2H07

165

< -110


ACOMD2H06

168

300 300

300 300

1710－1880MHz DC-bypass 1920－2200MHz DC-bypass 1920－2200MHz DC-bypass

ⅵ

In

de

x



Pass Band (MHz) Band 1 : 1710－1880 Band 2 : 1920－2200 Band 1 : 790－862 Band 2 : 880－960 Band 1 : 698－960 Band 2 : 1710－2200 Band 1 : 698－960 Band 2 : 1710－2200 Band 1 : 698－960 Band 2 : 2490－2700 Band 1 : 698－960 Band 2 : 2490－2700 Band 1 : 1710－2200 Band 2 : 2490－2700 Band 1 : 1710－2200 Band 2 : 2490－2700 Band 1 : 790－960 Band 2 : 1710－1880 Band 3 : 1920－2200 Band 1 : 790－960 Band 2 : 1710－1880 Band 3 : 1920－2200 Band 1 : 790－960 Band 2 : 1710－1880 Band 3 : 1920－2200 Band 1 : 790－960 Band 2 : 1710－1880 Band 3 : 1920－2200 Band 1 : 790－1880 Band 2 : 1920－2200 Band 1 : 2490－2700 Band 1 : 790－960 Band 2 : 1710－1880 Band 3 : 1920－2200 Band 4 : 2490－2700 ** Preliminary Issue

Max. Input power (W) 300 300

DC-Bypass 1710－1880MHz DC-bypass 1920－2200MHz DC-bypass

Intermodulation (dBm)

Dimension (mm)

Model

Page

< -110


ACOMD2H08

168

200 200


< -110


ACOMD2H09

171

300 300


< -117


ACOMD2H10

174

300 300


< -110


ACOMD2H11

177

300 300


< -117


ACOMD2H12

180

300 300


< -110


ACOMD2H13

183

300 300


< -117


ACOMD2L03

186

300 300


< -110


ACOMD2L04

189

300 300 300


< -117


ACOMT2H00

192

< -117


ACOMT2H02

192

< -110


ACOMT2H01

195

< -110


ACOMT2H03

195

300 300 300 300 300 300 300 300 300

1710－1880MHz DC-bypass 1920－2200MHz DC-bypass 1920－2200MHz DC-bypass 1710－1880MHz DC-bypass 1920－2200MHz DC-bypass

300 300 300


< -110


**ACOMT2M00

198

300 300 300 300


< -110


**ACOMQ2M00

201

x

de

In ⅶ


C. Accessories for RET Systems C－1. Remote Control Unit (RCU) 205

Antenna and RCU configuration list

Input voltage range (V)

DC 10－30

Adjustment time (full range) (min)

AISG type

AISG v1.1

Calibration time (min)

<2

<4

Dimension (mm)

205 x 65.5 x 56

AISG v2.0 DC 10－30

Model ARCU01100(AISG 1.1) ARCU01101(AISG 1.1) ARCU01102(AISG 1.1) ARCU01103(AISG 1.1)

Page

206

ARCU02000(AISG 2.0)

AISG v1.1

<2

<4

200 x 56 x 47

< 1.5 (typically, depending on antenna type)

< 3 (typically, depending on antenna type)

180 x 65 x 54

AISG v2.0 AISG v1.1

DC 10－30 AISG v2.0

ARCU01104(AISG 1.1) ARCU02001(AISG 2.0)

207

ARCU01109 (AISG 1.1)

208 ARCU02004 (AISG 2.0)

C－2. Bias Tee (BT) Frequency Range(MHz)

AISG type

Insertion loss (dB)

Dimension (mm)

Model

Page

690－2700

AISG v1.1 AISG v2.0

≤ 0.1 (690－960 MHz / 1710－2690 MHz) ≤ 0.15 (960－1710 MHz)

48.5 x 151 x 45

ABT000001

209

Model

Page

C－3. Smart Bias Tee (SBT) Frequency Range(MHz)

AISG type

Insertion loss (dB)

Dimension (mm)

690－2700

AISG v1.1 AISG v2.0

≤ 0.1 (690－960 MHz / 1710－2690 MHz) ≤ 0.15 (960－1710 MHz)

75 x 160 x 45

ASBT00001 ASBT00002

212

C－4. AISG Connecting Cables 215

AISG Connecting Cables For RRU AISG Output

216

ⅷ

In

de

x

AISG Connecting Cables For Remote Electrical Tilt(RET) System


D. Mounting Instructions D－1. Antenna Installation Guide Antenna (C1) Installation Guide

218

Antenna (D1) Installation Guide

220

D－2. DTMA Installation Guide DTMA (A) Installation Guide

222

D－3. Combiner Installation Guide Combiner (A) Installation Guide

224

D－4. RCU Installation Guide RCU (A) Installation Guide

228

RCU (B) Installation Guide

231

RCU (C) Installation Guide

234

D－5. BT Installation Guide BT (A) Installation Guide (01)

237

D－6. SBT Installation Guide SBT (A) Installation Guide (01)

239

SBT (B) Installation Guide (01)

241

x

de

In ⅸ

A B

Huawei Network Antennas

Antenna Line Products

C

Accessories for RET Systems

D

Mounting Instructions

ⅹ

A

Huawei Network Antennas

OV-450-470-360-9i-0F Model: A45VP0900

Electrical Properties Frequency range (MHz)

450－470

Polarization

Vertical

VSWR

≤1.4

Gain (dBi)

9.0

Horizontal 3dB beam width (°)

360

Vertical 3dB beam width (°)

11

Antenna pattern roundness (dB)

±1

Electrical downtilt(°)

0

Intermodulation IM3 (dBc)

≤-150

Max. CW input power (W)

150

Impedance (Ω)

50

Grounding

DC Ground Mechanical Properties

Dimensions (mm)

Φ52 x 3316

Packing dimensions (mm)

Φ164 x 3470

Net weight (kg)

5.0

Bracket weight (kg)

2.0

Packing weight (kg)

13.5

Mast diameter (mm)

50－85

Radome material

Fiberglass

Operating temperature (℃)

-55－+65

Max. wind velocity (km/h)

1 x 7/16 DIN Female

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

Any previous catalogue issues become invalid. Issue: 2012-06-01

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: [email protected] www.huawei.com

Hz

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.

460－470 MHz

2

455－465 MHz

0－ 4 DX 70M

450－460 MHz

45

Connector

200

DX-450-470-65-15i-0F Model: A45451500


450－470

Polarization VSWR Gain (dBi) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt (°)

+45°, -45° ≤1.5 15 65 16 ≥ 30 ≥ 25 ≥ 15 0


≤-160 (2 x 43 dBm carrier)

Max. CW input power (W) Impedance (Ω) Grounding

500 50 DC Ground Mechanical Properties

Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg)

2042 x 486 x 98 2267 x 598 x 269 28.3 6.5

Packing weight (kg) Mechanical downtilt (°) Mast diameter (mm) Radome material Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

450－460 MHz

41.6 0－16 50－115 Fiberglass -55－+65 Frontal: 740 (v=150 km/h) Lateral: 220 (v=150 km/h) Rear side: 1100 (v=150 km/h) 200 2 x 7/16 DIN Female

455－465 MHz

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE ANY KIND OF WARRANTIES.

Any previous catalogue issues become invalid.

Hz

0M 47 X 0－ D

45

Issue: 2012-06-01

450－470 X +45°

-45°

7/16 (F)

7/16 (F)

460－470 MHz


3

DX-790-960-65-15i-M Model: A79451500v01 Preliminary Issue Electrical Properties Frequency range (MHz)

790－862

Polarization Electrical downtilt (°) Gain (dBi) Side lobe suppression for first side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Max. power per input (W) Intermodulation IM3 (dBc) Squint (°) Tracking (dB) Impedance (Ω) Grounding

0° 14.6 0° 18

7° 14.5 7° 17 67 15.2

790－960 824－894 +45° , -45° 0－14 , continuously adjustable 14° 0° 7° 14° 0° 14.2 14.9 14.8 14.6 15.1 14° 0° 7° 14° 0° 16 18 17 16 18 65 14.5 < 1.4 ≥ 30 Typ. 28 Typ. 25 ≥ 10 500 (at 50 ℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier) ≤3 Avg. 1 (within 10dB HBW) 50 DC Ground

880－960

7° 14.8 7° 17 63 13.6

14° 14.7 14° 16

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1356 x 259 x 135

Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt (°) Mast diameter (mm) Radome material Radome colour Operational temperature (℃)

1784 x 392 x 230 11.2 4.6 20 0－16 50－115 Fiberglass Light grey -55 .. +65 Frontal: 440 (at 150 km/h) Lateral: 230 (at 150 km/h) Rear side: 585 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

Issue: 2012-06-01

Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: [email protected] www.huawei.com

Hz



4


9 DX 60M


0－

Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position

79

Wind load (N)

DX-790-960-65-16.5i-M Model: A79451600v01

Electrical Properties 790－960

Frequency range (MHz)

790－862

824－894

Polarization

+45° , -45°

Electrical downtilt (°)

0－12 , continuously adjustable

Gain (dBi) Side lobe suppression for first side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

0°

6°

16.2

16.3

0°

6°

20

20

12°

0°

6°

16.3

16.5

12°

0°

6°

16

20

18

16.0

12°

0°

6°

16.6

16.8

12°

0°

6°

12°

16

20

17

16

16.3

67

65

63

10.5

10.1

9.5

VSWR

< 1.5

Isolation between ports (dB)

≥ 30

Front to back ratio, copolar (dB)

Typ. 28

0°

Typ. 25

Cross polar ratio (dB)

880－960

≥ 10

±60°

Max. power per input (W)

500 (at 50℃ ambient temperature)


≤ -153 (2 x 43 dBm carrier)

Squint (°)

Avg. 1.5

Tracking (dB)

Avg. 1 (within 10dB HBW)

Impedance (Ω)

50

Grounding


Antenna dimensions (H x W x D) (mm)

1936 x 259 x 135

Packing dimensions (H x W x D) (mm)

2357 x 392 x 230

Antenna net weight (kg)

14.2

Bracket weight (kg)

4.6

Packing weight (kg)

25

Mechanical downtilt (°)

0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-55 .. +65

Wind load (N)

Frontal: 665 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 880 (at 150 km/h)

Max. operational wind speed (km/h)

150

Survival wind speed (km/h)

200

Connector Connector position

2 x 7/16 DIN Female Bottom

12° 16.4

79 0M 96 X 0－ D Hz

5

DX-790-960-65-16.5i-M Model: A79451600v01

56

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)

790－960 MHz HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

Hz

www.huawei.com

6

Issue: 2012-06-01

Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: [email protected]

9 DX 60M



0－


79


DX-790-960-65-17i-0F Model: A90451702v01



790－862

824－894

Polarization

880－960

+45°, -45°


0, Fixed

Gain (dBi)

16.5

16.7

17.1

Side lobe suppression for first side lobe above horizon (Typ.) (dB)

20

20

20


67

65

63


9.8

9.4

8.9

VSWR

< 1.4


≥ 30


Typ. 32

0°

Typ. 25


≥ 10

±60°


500



Squint (°)

Avg. 0.6

Tracking (dB)

Avg. 0.6 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1936 x 260 x 135


2357 x 392 x 230


12.9

Bracket weight (kg)

4.6

Packing weight (kg)

22.3


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



79 0M 96 X 0－ D Hz

7

DX-790-960-65-17i-0F Model: A90451702v01

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

8

Issue: 2012-06-01


9 DX 60M



0－


79


DX-790-960-65-17i-3F Model: A90451705v01



790－862

824－894

Polarization

880－960

+45° , -45°


3, Fixed

Gain (dBi)

16.5

16.7

17.1


19

19

19


67

65

63


9.8

9.4

8.9

VSWR

< 1.4


≥ 30


Typ. 32

0°

Typ. 25


≥ 10

±60°


500



Squint (°)

Avg. 0.6

Tracking (dB)


Impedance (Ω)

50

Grounding



1936 x 260 x 135


2357 x 392 x 230


12.9

Bracket weight (kg)

4.6

Packing weight (kg)

22.3


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



79 0M 96 X 0－ D Hz

9

DX-790-960-65-17i-3F Model: A90451705v01

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

10

Issue: 2012-06-01


9 DX 60M



0－


79


DX-790-960-65-17i-6F Model: A90451709



790－862

824－894

Polarization

880－960

+45° , -45°


6, Fixed

Gain (dBi)

16.5

16.7

17.1


19

19

18


67

65

63


9.8

9.4

8.9

VSWR

< 1.4


≥ 30


Typ. 30

0°

Typ. 25


≥ 10

±60°


500




Avg. 0.6



Impedance (Ω)

50

Grounding



1936 x 260 x 135


2357 x 392 x 230


12.9

Bracket weight (kg)

4.6

Packing weight (kg)

22.3


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



79 0M 96 X 0－ D Hz

11

DX-790-960-65-17i-6F Model: A90451709

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

12

Issue: 2012-06-01


9 DX 60M



0－


79


DX-790-960-65-17.5i-M Model: A79451700v01



790－862

824－894

Polarization

880－960

+45°, -45°


0－10, continuously adjustable

Gain (dBi) Side lobe suppression for first side lobe above horizon (Typ.) (dB)

0°

5°

17.0

17.1

0°

5°

20

18

10°

0°

5°

17.1

17.3

10°

0°

5°

18

20

20

16.7

10°

0°

5°

17.3

17.6

10°

0°

5°

10°

18

20

18

18

17.0


66

66

64


8.3

7.9

7.3

VSWR

< 1.5


≥ 30


Typ. 30

0°

Typ. 25


≥ 10

±60°


500 (at 50 ℃ ambient temperature)



Squint (°)

Avg. 1

Tracking (dB)


Impedance (Ω)

50

Grounding



2535 x 259 x 135


2952 x 392 x 230


17.5

Bracket weight (kg)

5.6

Packing weight (kg)

29


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



10° 17.1

79 0M 96 X 0－ D Hz

13

DX-790-960-65-17.5i-M Model: A79451700v01

56

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

14

Issue: 2012-06-01


9 DX 60M



0－


79


DX-790-960-65-18i-0F Model: A90451802v01



790－862

824－894

Polarization

880－960

+45° , -45°


0, Fixed

Gain (dBi)

17.5

17.7

18.0


21

21

21


67

65

63


7.8

7.5

7.1

VSWR

< 1.4


≥ 30


Typ. 32

0°

Typ. 25


≥ 10

±60°


500



Squint (°)

Avg. 0.5

Tracking (dB)


Impedance (Ω)

50

Grounding



2535 x 259 x 135


2952 x 392 x 230


16.3

Bracket weight (kg)

5.6

Packing weight (kg)

27.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



79 0M 96 X 0－ D Hz

15

DX-790-960-65-18i-0F Model: A90451802v01

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

16

Issue: 2012-06-01


9 DX 60M



0－


79


DX-790-960-65-18i-3F Model: A90451805v01



790－862

824－894

Polarization

880－960

+45° , -45°


3, Fixed

Gain (dBi)

17.5

17.7

18.0


20

20

20


67

65

63


7.8

7.5

7.1

VSWR

< 1.4


≥ 30


Typ. 32

0°

Typ. 25


≥ 10

±60°


500



Squint (°)

Avg. 0.5

Tracking (dB)


Impedance (Ω)

50

Grounding



2535 x 259 x 135


2952 x 392 x 230


16.3

Bracket weight (kg)

5.6

Packing weight (kg)

27.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200



79 0M 96 X 0－ D Hz

17

DX-790-960-65-18i-3F Model: A90451805v01

Unit: mm

70

790－960 X +45°

-45°

7/16 (F)

7/16 (F)


Hz

www.huawei.com

18

Issue: 2012-06-01


9 DX 60M



0－


79


DX-806-960-65-15i-0F Model: A90451500

Electrical Properties Frequency range (MHz) Polarization

806－866

824－894 +45° , -45°

VSWR

880－960

≤1.4

Gain (dBi) Side lobe suppression for first side lobe above horizon (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

14.6

14.8

15.0

Typ. 17

Typ. 17

Typ. 17

67

65

62

15.5

14.6 14.0 ≥30 ≥25 ≥15 0 ≤-150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg)

1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18

Mechanical downtilt (°) Mast diameter (mm) Radomematerial Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

806－866 MHz

0－16 50－115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 120 (v=150 km/h) Rear side: 425 (v=150 km/h) 200 2 x 7/16 DIN Female

824－894 MHz



19

Hz

0M 96 X 6－ D

80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


DX-806-960-65-15i-6F Model: A90451501


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.4


14.5

14.7

14.9

Typ. 17

Typ. 17

Typ. 17

67

65

62

15.5


Mechanical Properties 1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18

806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz

Max. wind velocity (km/h) Connector

806－960 X

20

Wind load (N)


9 DX 60M

Mast diameter (mm) Radomematerial Operating temperature (℃)

6－


80

Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (kg) Bracket weight (kg) Packing weight (kg)

DX-806-960-65-15i-3F Model: A90451505


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.5


14.7

15.0

15.3

Typ. 17

Typ. 17

Typ. 17

67

65

62

15.5



1322 x 289 x 85 1662 x 405 x 175 9.5 4.6 18


806－866 MHz


824－894 MHz



21

Hz

0M 96 X 6－ D

80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


DX-806-960-65-15.3i-0F Model: A90451502


806－866

824－894 +45° , -45°

880－960

VSWR

≤1.4

≤1.4

≤1.3

Gain (dBi) Side lobe suppression for first side lobe above horizon (dB)

14.8

15.0

15.3

≥19

≥19

≥19

68

66

64

Horizontal 3dB beam width (°) Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB)

15.9

0° ±60°

Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

15.4 14.3 ≥30 ≥30 ≥20 ≥10 0 ≤-150 (2 x 43 dBm carrier) 500 50 DC Ground


806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz


806－960 X

22

Wind load (N)

50－115 Fiberglass -55 .. +65 Frontal: 290 (v=150 km/h) Lateral: 180 (v=150 km/h) Rear side: 430 (v=150 km/h) 200 2 x 7/16 DIN Female

9 DX 60M


0－16

6－


80


DX-806-960-65-15.3i-6F Model: A90451503


806－866

824－894 +45° , -45°

880－960

VSWR

≤1.35

≤1.35

≤1.3


14.7

14.9

15.2

≥19

≥19

≥19

68

66

64

Horizontal 3dB beam width (°) Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB)

15.9

0° ±60°




1312 x 295 x 126 1622 x 405 x 205 10.5 4.6 18


806－866 MHz


824－894 MHz



80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


0M 96 X 6－ D Hz

23

DX-806-960-65-17i-0F Model: A90451700


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.37


16.6

16.8

17.0

Typ. 17

Typ. 17

Typ. 17

67

64

63

11.0


Mechanical Properties 1932 x 289 x 85 2272 x 405 x 175 13.5 4.6 20.8

806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz


806－960 X

24

Wind load (N)


9 DX 60M


6－


80


DX-806-960-65-17i-3F Model: A90451705


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.5


16.7

17.0

17.2

Typ. 17

Typ. 17

Typ. 17

67

64

63

11.0



1932 x 289 x 85 2272 x 405 x 175 13.5 4.6 21.6


806－866 MHz


824－894 MHz



80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


0M 96 X 6－ D Hz

25

DX-806-960-90-17i-3F Model: A90451706



806－866

824－894

Polarization

880－960

+45° , -45°


3, Fixed

Gain (dBi)

16.4

16.7

16.9


19

19

19


88

86

84


7.9

7.6

7.1

VSWR

< 1.4


≥ 30


≥ 25


0°

Typ. 20 ≥ 10

±60°


500



Squint (°)

Avg. 1.0

Tracking (dB)


Impedance (Ω)

50

Grounding



2526 x 268 x 125


2842 x 405 x 205


17.4

Bracket weight (kg)

4.6

Packing weight (kg)

28.8


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65 Frontal: 510 (at 150 km/h) Lateral: 340 (at 150 km/h) Rear side: 750 (at 150 km/h)


150


200

Hz

Bottom

9 DX 60M

26

Connector position

2 x 7/16 DIN Female

6－

Connector

80

Wind load (N)

DX-806-960-90-17i-3F Model: A90451706

120

Unit: mm

806－960 X +45°

-45°

7/16 (F)

7/16 (F)




27

Hz

0M 96 X 6－ D

80

Issue: 2012-06-01


DX-806-960-90-17i-0F Model: A90451600


806－866

824－894 +45° , -45°

VSWR

880－960

≤ 1.4


16.5

16.8

17.0

≥18

≥18

≥18


88

86

84

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB)

8.1


0° ±60°




806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz


806－960 X

28

Wind load (N)


9 DX 60M


0－8

6－


80


DX-806-960-90-17i-M Model: A90451704

Frequency range (MHz) Polarization


VSWR

824－894 +45° , -45°

880－960

≤ 1.4

≤ 1.4

≤ 1.45

Gain Side lobe suppression for first side lobe above horizon

(°) (dBi) (°) (dBi)

2 16.1 2 18

6 16.2 6 18


88


8.2


0° ±60°


9.5 16.0 9.5 18

2 16.3 2 18

6 16.4 6 18

9.5 16.2 9.5 18

2 16.4 2 18

86

6 16.5 6 18

9.5 16.3 9.5 18

85

7.6 7.4 ≥30 ≥25 ≥20 Typ. 13 2－9.5 ≤-150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 2526 x 268 x 125 Packing dimensions (H x W x D) (mm) 2842 x 399 x 215 Net weight (kg) 18.6 Bracket weight (kg) 4.6 Packing weight (kg) 27 Mechanical downtilt (°) Mast diameter (mm) Radomematerial Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

806－866 MHz


824－894 MHz



29

Hz

0M 96 X 6－ D

80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


DX-806-960-65-17.5i-M Model: A90451701



VSWR

824－894 +45° , -45°

880－960

≤ 1.4

≤ 1.4

≤ 1.47


(°) (dBi) (°) (dBi)

2 17.1 2 18

6 17.2 6 17


68


8.8


0° ±60°


9.5 16.9 9.5 16

2 17.2 2 18

6 17.3 6 17

9.5 17.0 9.5 16

2 17.4 2 18

66

6 17.5 6 17

9.5 17.2 9.5 16

65

8.5 7.8 ≥30 ≥28 ≥18 ≥10 2－9.5 ≤-150 (2 x 43 dBm carrier) 500 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 2515 x 289 x 85 Packing dimensions (H x W x D) (mm) 2855 x 405 x 175 Net weight (kg) 15.5 Bracket weight (kg) 4.6 Packing weight (kg) 25.3

824－894 MHz



-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz

806－866 MHz

+45°

30


806－960 X

9 DX 60M

Wind load (N)


6－


80


DX-806-960-65-18i-0F Model: A90451800


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.45


17.4

17.6

17.8

Typ. 17

Typ. 17

Typ. 17


67

64

63

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

8.2



2572 x 289 x 85 2912 x 405 x 175 16.5 4.6 25.3


806－866 MHz


824－894 MHz



80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


0M 96 X 6－ D Hz

31

DX-806-960-65-18i-3F Model: A90451805


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.45


17.8

18.0

18.2

Typ. 17

Typ. 17

Typ. 17


67

64

63


8.2



806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz


806－960 X

32

Wind load (N)


9 DX 60M


6－


80


DX-806-960-65-18i-6F Model: A90451801


806－866

824－894 +45° , -45°

VSWR

880－960

≤1.37


17.3

17.6

17.8

Typ. 17

Typ. 17

Typ. 17


67

64

63


8.0



2572 x 289 x 85 2912 x 405 x 175 16.5 4.6 26


806－866 MHz


824－894 MHz



80

Issue: 2012-06-01

806－960 X +45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


0M 96 X 6－ D Hz

33

DX-806-960-65-18.2i-6F Model: A90451804



824－894 +45° , -45°

880－960

VSWR

≤1.4

≤1.4

≤1.3


17.5

17.7

18.0

≥19

≥19

≥19


68

66

64


8.0


0° ±60°



Mechanical Properties 2532 x 295 x 126 2842 x 405 x 205 19 4.6 28

806－866 MHz

824－894 MHz



+45°

-45°

7/16 (F)

7/16 (F)

880－960 MHz


Hz


806－960 X

34

Wind load (N)


9 DX 60M


0－8

6－


80


DX-1710-2170-90-17i-M Model: A19451703



1850－1990 +45° , -45°

VSWR

1920－2170

≤ 1.4


(°) (dBi) (°) (dBi)

2 16.3 2 18

6 16.5 6 17


84

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

7.5

10 16.2 10 16

2 16.5 2 18

6 16.7 6 17

10 16.4 10 16

2 16.7 2 18

88

6 17.0 6 17

10 16.5 10 16

86

6.5 6.0 ≥30 ≥ 25 ≥18 ≥10 2－10 ≤-150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 1306 x 155 x 79 Packing dimensions (H x W x D) (mm) 1770 x 260 x 160 Net weight (kg) 6.5 Bracket weight (kg) 3.0 Packing weight (kg) 11.8 Mechanical downtilt (°) Mast diameter (mm) Radomematerial Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

1710－1880 MHz


1850－1990 MHz



35

Hz

M 70 21 － DX

10

17

Issue: 2012-06-01

1710－2170 X +45°

-45°

7/16 (F)

7/16 (F)

1920－2170 MHz


DX-1710-2170-90-17i-0F Model: A19451704

Electrical Properties 1710 - 2170


1710－1880

1850－1990

Polarization

1920－2170

+45°, -45°


0, Fixed

Gain (dBi)

16.5

16.7

17.1

Side lobe suppression for first side lobe above horizon (dB)

18

20

20


86

85

84


7.0

6.7

6.4

VSWR

< 1.4


≥ 30


≥ 25


0°

Typ. 20 ≥ 10

±60°





Squint (°)

Avg. 2.0

Tracking (dB)


Impedance (Ω)

50

Grounding



1306 x 155 x 79


1770 x 260 x 160


5.4

Bracket weight (kg)

3.0

Packing weight (kg)

10.5 0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 170 M

36

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2170-90-17i-0F Model: A19451704

80

Unit: mm

1710－2170 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2170 MHz

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.



37

Hz

M 70 21 － DX

10

17

Issue: 2012-06-01


DX-1710-2170-90-17i-3F Model: A19451705

Electrical Properties 1710 - 2170


1710－1880

1850－1990

Polarization

1920－2170

+45°, -45°


3, Fixed

Gain (dBi)

16.5

16.7

17.0


18

20

20


86

85

84


7.0

6.7

6.4

VSWR

< 1.4


≥ 30


≥ 25


0°

Typ. 20 ≥ 10

±60°





Squint (°)

Avg. 2

Tracking (dB)


Impedance (Ω)

50

Grounding



1306 x 155 x 79


1770 x 260 x 160


5.4

Bracket weight (kg)

3.0

Packing weight (kg)

10.5 0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 170 M

38

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2170-90-17i-3F Model: A19451705

80

Unit: mm

1710－2170 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2170 MHz




39

Hz

M 70 21 － DX

10

17

Issue: 2012-06-01


DX-1710-2170-65-18i-2F Model: A19451801


1710－1880

1850－1990 +45° , -45°

VSWR

1920－2170

≤ 1.4


17.6

17.8

18.0

Typ. 20

Typ. 20

Typ. 20


68

65

62

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

7.3

6.8 6.2 ≥ 30 Typ. 30 Typ. 21 Typ. 10 2 ≤-150 (2 x 43 dBm carrier) 200 50 DC Ground


1850－1990 MHz



-45°

7/16 (F)

7/16 (F)

1920－2170 MHz


Hz

1710－1880 MHz

+45°

40


1710－2170 X

2 DX 170 M

Wind load (N)


－


0－16

10


17


DX-1710-2170-33-21i-M Model: A19452101



1850－1990 +45° , -45°

VSWR

1920－2170

≤ 1.45


(°) (dBi) (°) (dBi)

2 20.0 2 18

6 20.1 6 17


35


7.2

10 20.1 10 16

2 20.3 2 18

6 20.5 6 17

10 20.1 10 16

2 20.7 2 18

33

6 20.5 6 17

10 19.8 10 16

31

6.6 6.2 ≥30 Typ. 28 Typ. 20 0－10 ≤-150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 1318 x 289 x 85 Packing dimensions (H x W x D) (mm) 1662 x 405 x 175 Net weight (kg) 11.4 Bracket weight (kg) 4.6 Packing weight (kg) 18.4 Mechanical downtilt (°) Mast diameter (mm) Radomematerial Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

1710－1880 MHz


1850－1990 MHz



41

Hz

M 70 21 － DX

10

17

Issue: 2012-06-01

1710－2170 X +45°

-45°

7/16 (F)

7/16 (F)

1920－2170 MHz


DX-1710-2170-33-21i-0F Model: A19452102


1710－1880

1850－1990 +45° , -45°

VSWR

1920－2170

≤1.45


20.3

20.7

20.9

18

18

18


35

33

31


7.2

6.6 6.2 ≥30 Typ. 28 Typ. 20 0 ≤-150 (2 x 43 dBm carrier) 300 50 DC Ground


1850－1990 MHz



-45°

7/16 (F)

7/16 (F)

1920－2170 MHz


Hz

1710－1880 MHz

+45°

42


1710－2170 X

2 DX 170 M

Wind load (N)


－


10


17


DX-1710-2170-65-21i-0F Model: A19452100



1850－1990 +45° , -45°

VSWR

1920－2170

≤ 1.45


20.0

20.5

20.8

18

18

18

63

60


66

Vertical 3dB beam width (°) First null_fill below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

4.2

3.7 3.3 20 ≥ 30 ≥ 30 ≥ 17 ≥ 10 0 ≤-150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 2170 x 155 x 79 Packing dimensions (H x W x D) (mm) 2580 x 250 x 145 Net weight (kg) 9.1 Bracket weight (kg) 3 Packing weight (kg) 14.5 Mechanical downtilt (°) Mast diameter (mm) Radomematerial Operating temperature (℃) Wind load (N) Max. wind velocity (km/h) Connector

1710－1880 MHz

0－8 50－115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female

1850－1990 MHz



43

Hz

M 70 21 － DX

10

17

Issue: 2012-06-01

1710－2170 X +45°

-45°

7/16 (F)

7/16 (F)

1920－2170 MHz


DX-1710-2170-65-21i-2F Model: A19452103



1850－1990 +45° , -45°

VSWR

1920－2170

≤1.45


20.0

20.5

20.8

16

16

16

63

60


66

Vertical 3dB beam width (°) First null_fill below main beam (dB) Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Electrical downtilt (°) Intermodulation IM3 (dBc) Max. CW input power (W) Impedance (Ω) Grounding

4.5

4.0 3.6 20 ≥ 30 ≥ 30 ≥ 17 ≥ 10 0 ≤-150 (2 x 43 dBm carrier) 300 50 DC Ground

Mechanical Properties Dimensions (H x W x D) (mm) 2170 x 155 x 79 Packing dimensions (H x W x D) (mm) 2580 x 250 x 145 Net weight (kg) 9.1 Bracket weight (kg) 3 Packing weight (kg) 15



7/16 (F)

7/16 (F)

1920－2170 MHz


Hz

1850－1990 MHz

-45°

44

1710－1880 MHz

+45°

2 DX 170 M


1710－2170 X

－

Wind load (N)

0－8 50－115 Fiberglass -55 .. +65 Frontal:250 (v=150 km/h) Lateral: 185 (v=150 km/h) Rear side: 375 (v=150 km/h) 200 2 x 7/16 DIN Female

10


17


DX-1710-2200-65-15.5i-M Model: A19451505 Preliminary Issue Electrical Properties Frequency range (MHz)

1710－1880

Polarization Electrical downtilt (°) Gain (dBi) Side lobe suppression for first side lobe above horizon (Typ.) (dB)

0° 14.9 0° 17

Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Max. power per input (W) Intermodulation IM3 (dBc)

6° 15.0 6° 16 67 14

12° 14.6 12° 15

1710－2200 1850－1990 1920－2170 +45° , -45° 0－12 , continuously adjustable 0° 6° 12° 0° 6° 12° 15.3 15.4 14.8 15.4 15.6 15.0 0° 6° 12° 0° 6° 12° 17 16 15 17 16 15 64 61 13 12.6 < 1.5 ≥ 30 Typ. 28 Typ. 20 Typ. 10 300 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)

Squint (°)

2170－2200

0° 15.4 0° 17

6° 15.5 6° 16 60 11.5

12° 15.0 12° 15

Typ. 3

Tracking (dB) Impedance (Ω) Grounding

Avg. 2 (within 10dB HBW) 50 DC Ground Mechanical Properties

Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt (°) Mast diameter (mm) Radome material Radome colour Operational temperature (℃) Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position



45

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01

730 x 155 x 89 1227 x 253 x 200 5.3 2.6 9.5 0－16 50－115 Fiberglass Light grey -55 .. +65 Frontal: 160 (at 150 km/h) Lateral: 80 (at 150 km/h) Rear side: 185 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom


DX-1710-2200-65-15.5i-3F Model: A19451601



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°


3, Fixed

Gain (dBi)

15.3

15.7

16.2

16.0


18

20

20

20


67

64

61

60

13.3

12.5

11.8

11.3

Vertical 3dB beam width (°) VSWR

< 1.4


≥ 30


Typ. 30

0°

Typ. 22

±60°

Typ. 10

Cross polar ratio (dB) Max. power per input (W)




Squint (°)

Avg. 1.5

Tracking (dB)


Impedance (Ω)

50

Grounding



702 x 155 x 89


1103 x 253 x 200


3.6

Bracket weight (kg)

2.6

Packing weight (kg)

8.2 0－20

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 200 M

46

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2200-65-15.5i-3F Model: A19451601

Unit: mm

91

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




M 00 22 － DX

10

17

Issue: 2012-06-01


Hz

47

DX-1710-2200-65-15.5i-6F Model: A19451602



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°


6, Fixed

Gain (dBi)

15.2

15.6

16.1

16.0


18

20

20

20


67

64

61

60

13.3

12.5

11.8

11.3


< 1.4


≥ 30


Typ. 30

0°

Typ. 22

±60°

Typ. 10





Squint (°)

Avg. 1.8

Tracking (dB)


Impedance (Ω)

50

Grounding



702 x 155 x 89


1103 x 253 x 200


3.6

Bracket weight (kg)

2.6

Packing weight (kg)

8.2 0－20

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

48

Connector position

2 x 7/16 DIN Female

－ 2 DX 200 M

Connector

10

Wind load (N)

17


DX-1710-2200-65-15.5i-6F Model: A19451602

Unit: mm

91

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




49

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2200-65-18i-M Model: A19451811



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°




0°

5°

10°

0°

5°

10°

0°

5°

10°

0°

5°

10°

17.2

17.6

17.4

17.7

18.0

17.7

18.0

18.1

17.9

18.0

18.2

17.9

0°

5°

10°

0°

5°

10°

0°

5°

10°

0°

5°

10°

20

16

18

20

20

18

18

17

16

18

18

16


67

64

61

60


7.5

7.0

6.7

6.2

VSWR

< 1.5


≥ 30


Typ. 30

0°

Typ. 22


≥ 10

±60°





Squint (°)

Avg. 1.2

Tracking (dB)


Impedance (Ω)

50

Grounding



1311 x 155 x 89


1697 x 252 x 200


6.2

Bracket weight (kg)

2.6

Packing weight (kg)

11.5 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 200 M

50

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2200-65-18i-M Model: A19451811

34

46

34

Unit: mm

1710－2200 X +45°

7/16 (F)

-45°

7/16 (F)




51

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2690-65-18i-M-R Model: A264518R0 Preliminary Issue Electrical Properties 1710－2690


1710－1990

1920－2200

Polarization

2200－2490 +45°, -45°




0°

6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

17.3

17.4

17.2

17.6

17.8

17.5

17.7

18.0

17.5

17.8

18.0

17.3

0°

6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

18

17

16

18

17

16

18

17

16

17

17

16


66

63


6.5

6.2

VSWR

< 1.5


≥ 30


Typ. 30

0°

Typ. 20


2490－2690

60

60

5.5

4.7

Typ. 10

±60°





Squint (°) Tracking (dB)

Typ. 3 Avg. 2 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1425 x 155 x 89


1730 x 252 x 200 7.6

Bracket weight (kg)

2.6

Packing weight (kg)

13.5 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Connector position RET Type

200 2 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector

2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Hz

Connector

52


150

2 DX 690 M



－

Wind load (N)

10


17


DX-1710-2690-65-18i-M-R Model: A264518R0 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30

Power consumption (W)

< 10 (motor activated) < 0.5 (stand by)




< 3 (typically, depending on antenna type) 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

RET Connector Pin assignment according AISG

1

2

3

4

DC

n/c

RS-485B

n/c

y EN 60950-1 (Safety)

6

7

8

RS-485A DC in/out DC return

n/c

AISG interface (each pin) 3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA)

Standards:

5

Certification: CE, FCC, RoHS, WEEE

y EN 55022 (Emission) y EN 55024 (Immunity) y ETSI EN300386 (1.4.1) y FCC part15

HINT Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.



53

Hz

M 90 26 － DX

10

17

Issue: 2012-06-01


DX-1710-2200-65-18i-0F Model: A19451800v01



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°


0, Fixed

Gain (dBi)

17.6

18.0

18.3

18.3


18

19

19

19


67

64

62

60


7.0

6.7

6.4

6.0

VSWR

< 1.4


≥ 30


Typ. 30

0°

Typ. 22

±60°

Typ. 10






Avg. 1.2



Impedance (Ω)

50

Grounding



1311 x 155 x 89


1697 x 252 x 200


5.5

Bracket weight (kg)

2.6

Packing weight (kg)

11.7 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 200 M

54

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2200-65-18i-0F Model: A19451800v01

Unit: mm

91

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




55

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2200-65-18i-3F Model: A19451810v01



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°


3, Fixed

Gain (dBi)

17.7

18.1

18.4

18.2


19

19

19

19


67

64

62

60


7.0

6.7

6.4

6.0

VSWR

< 1.4


≥ 30


Typ. 30

0°

Typ. 22

±60°

Typ. 10






Avg. 1.2



Impedance (Ω)

50

Grounding



1311 x 155 x 89


1697 x 252 x 200


5.5

Bracket weight (kg)

2.6

Packing weight (kg)

11.7 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 200 M

56

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2200-65-18i-3F Model: A19451810v01

Unit: mm

91

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




M 00 22 － DX

10

17

Issue: 2012-06-01


Hz

57

DX-1710-2200-65-18i-6F Model: A19451802v01



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°


6, Fixed

Gain (dBi)

17.7

18.1

18.4

18.2


18

20

20

20


67

64

62

60


7.0

6.7

6.4

6.0

VSWR

< 1.4


≥ 30


Typ. 30

0°

Typ. 22

±60°

Typ. 10






Avg. 1.5



Impedance (Ω)

50

Grounding



1311 x 155 x 89


1697 x 252 x 200


5.5

Bracket weight (kg)

2.6

Packing weight (kg)

11.7 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 200 M

58

Connector position

2 x 7/16 DIN Female

－

Connector

10

Wind load (N)

17


DX-1710-2200-65-18i-6F Model: A19451802v01

Unit: mm

91

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




59

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2200-65-19.5i-M Model: A19451902



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°



Gain (dBi)

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

18.6

18.7

18.5

19.0

19.1

18.9

19.2

19.4

19.1

19.4

19.5

18.8

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

20

17

16

20

17

16

20

18

17

20

18

17

Side lobe suppression for first side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width (°)

67

64

62

60


5.0

4.7

4.5

4.1

VSWR

< 1.5


≥ 30


Typ. 32

0°

Typ. 25

±60°

Typ. 10





Squint (°)

Avg. 1.5

Tracking (dB)


Impedance (Ω)

50

Grounding



1954 x 155 x 89


2357 x 253 x 200


8.4

Bracket weight (kg)

2.6

Packing weight (kg)

14.3


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

2 DX 200 M

Hz

Bottom

60

－

Connector position

2 x 7/16 DIN Female

10

Connector

17

Wind load (N)

DX-1710-2200-65-19.5i-M Model: A19451902

34

Unit: mm 46

34

1710－2200 X +45°

-45°

7/16 (F)

7/16 (F)




61

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2690-65-18i-M Model: A26451800



1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45°, -45°



Gain (dBi)

0°

5°

17.0

17.1

0°

5°

18

17


10°

0°

5°

17.4

17.6

10°

0°

5°

16

18

17

16.9

10°

0°

5°

17.9

18.1

10°

0°

5°

16

18

17

17.3

10°

0°

5°

18.0

18.1

10°

0°

5°

10°

16

18

17

16

17.7


69

65

62

60


6.6

6.0

5.4

4.9

VSWR

< 1.5


≥ 30


Typ. 27

0°

Typ. 20

±60°

Typ. 10





Squint (°)

10° 17.5

Avg. 3

Tracking (dB)

Typ. 2 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1410 x 155 x 89


2027 x 259 x 185


7.3

Bracket weight (kg)

2.6

Packing weight (kg)

13.0 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Hz

Bottom

2 DX 690 M

62

Connector position

2 x 7/16 DIN Female (Long neck)

－

Connector

10

Wind load (N)

17


DX-1710-2690-65-18i-M Model: A26451800

Unit: mm 54

54

1710－2690 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2200 MHz

2200－2690 MHz




63

Hz

M 90 26 － DX

10

17

Issue: 2012-06-01


DX-1710-2200-65-18i-M-R Model: A194518R0 Preliminary Issue Electrical Properties 1710－2200


1710－1880

1850－1990

Polarization

1920－2170 +45°, -45°



Gain (dBi)

0°

5°

17.2

17.4

0°

5°

18

15


10°

0°

5°

17.5

17.8

10°

0°

5°

16

18

17

17.1


67

64


7.5

7.0

10°

0°

5°

17.8

18.1

10°

0°

5°

16

18

17

17.4

VSWR

< 1.5


≥ 30


Typ. 30

0°

Typ. 20


2170－2200

10°

5° 17.6

10°

0°

5°

10°

16

18

17

16

61

60

6.7

6.2

10° 17.5

Typ. 10

±60°






0° 17.4

17.6

Typ. 3 Typ. 3 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1315 x 155 x 89


1807 x 222 x 160 7

Bracket weight (kg)

2.6

Packing weight (kg)

11 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Connector position RET Type

200 2 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector


Hz

Connector

64


150

2 DX 200 M



－

Wind load (N)

10


17


DX-1710-2200-65-18i-M-R Model: A194518R0 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






65

Hz

M 00 22 － DX

10

17

Issue: 2012-06-01


DX-1710-2690-65-19.5i-M Model: A26451900



1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45°, -45°



Gain (dBi)

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

18.0

18.2

18.1

18.3

18.6

18.5

18.7

19.1

19.0

19.0

19.4

19.1

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

18

18

15

19

18

16

18

18

18

17

17

16


69

65

62

60


4.9

4.5

4.1

3.7

VSWR

< 1.5


≥ 30


Typ. 27

0°

Typ. 20

±60°

Typ. 10





Squint (°)

Typ. 4

Tracking (dB)


Impedance (Ω)

50

Grounding



1932 x 155 x 89


2417 x 292 x 195


9.0

Bracket weight (kg)

2.6

Packing weight (kg)

15.8


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

2 DX 690 M

Hz

Bottom

66

－

Connector position


10

Connector

17

Wind load (N)

DX-1710-2690-65-19.5i-M Model: A26451900

Unit: mm 54

54

1710－2690 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2200 MHz

2200－2690 MHz




67

Hz

M 90 26 － DX

10

17

Issue: 2012-06-01


DXX-790-862/880-960-65/65-16i/16.5i-M/M-R Model: ADU4516R0 Preliminary Issue Electrical Properties 790－862

880－960

Polarization

+45°, -45°



Gain (dBi) Side lobe suppression for first side lobe above horizon (Typ.) (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

0°

6°

15.6

15.8

0°

6°

17

16

12°

0°

6°

16.1

16.3

12°

0°

6°

12°

16

17

16

15

15.4

67

63

10.8

9.4

VSWR

< 1.5


≥ 30

Front to back ratio, copolar (dB) Cross polar ratio (dB)

Typ. 28

12° 15.9

Typ. 30

0°

Typ. 20 ≥ 10

±60°





Impedance (Ω)

50

Grounding



1990 x 259 x 135


2282 x 398 x 240 24

Bracket weight (kg)

4.6

Packing weight (kg)

32.6 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N)



150


200

Connector Connector position RET Type

4 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector


68


79 0－ 86 2/ 88 DX 0－ 96 X 0M Hz


DXX-790-862/880-960-65/65-16i/16.5i-M/M-R Model: ADU4516R0 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5





Any previous catalogue issues become invalid. Hz 0M 96 0－ 88 X 2/ DX 86 0－ 79

Issue: 2012-06-01


69


880－960

Polarization

+45°, -45°




0°

5°

16.5

16.7

0°

5°

17

16

10°

0°

5°

17.1

17.3

10°

0°

5°

10°

15

17

16

15

16.4


67

63


8.3

7.2

VSWR

< 1.5


≥ 30


Typ. 30

0°

Typ. 20


10° 17.0

≥ 10

±60°





Impedance (Ω)

50

Grounding



2565 x 259 x 135


2867 x 397 x 220


27

Bracket weight (kg)

5.6

Packing weight (kg)

38 0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200


4 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector


70

Wind load (N)

79 0－ 86 2/ 88 DX 0－ 96 X 0M Hz



Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5





Any previous catalogue issues become invalid. Hz 0M 96 0－ 88 X 2/ DX 86 0－ 79

Issue: 2012-06-01


71

DXX-790-960/1710-2180-65/65-14i/17i-M/M Model: ADU451503



790－862

1710－2180

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°


0－14, continuously adjustable 0°

Gain (dBi)

7°

14°

0°

7°

14°

0°

7°


0°

5°

10°

0°

5°

10°

0°

5°

10°

14.4 14.3 14.0 14.5 14.5 14.1 14.5 14.5 14.1 16.4 16.5 16.3 17.0 17.0 16.2 17.2 17.3 16.4

Side lobe suppression for first side 0° lobe above horizon (Typ.) (dB) 18

7°

14°

0°

7°

14°

0°

7°

14°

0°

5°

10°

0°

5°

10°

0°

5°

10°

18

17

18

18

17

17

15

15

19

17

17

19

16

17

19

16

17


69

66

64

15.7

15.0

14.0


63

60

7.5

7.1

6.6

< 1.5 Intra-system: ≥ 30 Inter-system (790 - 960 / 1710 - 2180 MHz): ≥ 40

Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB)

65

Typ. 28

Typ. 28

0°

Typ. 25

Typ. 20

±60°

Typ. 10

Typ. 10






Squint (°)

Avg. 2.0

Tracking (dB)


Impedance (Ω)

50

Grounding



1360 x 259 x 135


1784 x 392 x 230


13.7

Bracket weight (kg)

4.6

Packing weight (kg)

22.2 0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200



72

Wind load (N)

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz



56

55

70

790－960 X

Unit: mm

1710－2180 X

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790－960 MHz

1710－2180 MHz



Hz M 80 21 － 10 17 XX 0/ D 96 0－ 79



73

DXX-790-960/1710-2180-65/65-16i/18.5i-M/M Model: ADU451602v01



790－862

1710－2180

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



Gain (dBi)

6°

12°

0°

6°

12°

0°

6°


0°

4°

8°

0°

4°

8°

0°

4°

8°

15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3


6°

12°

0°

6°

12°

0°

6°

12°

0°

5°

10°

0°

5°

10°

0°

5°

10°

17

15

20

18

15

17

18

15

20

18

18

18

17

15

18

15

15


69

66

64

10.6

10.2

9.5


63

60

5.2

5.0

4.7

< 1.5 Intra-system: ≥ 30 Inter-system (790 - 960 / 1710 - 2180 MHz): ≥ 40


65

Typ. 28

Typ. 30

0°

Typ. 25

Typ. 20

±60°

Typ. 10

Typ. 10






Squint (°)

Avg. 2.5

Tracking (dB)


Impedance (Ω)

50

Grounding



1936 x 259 x 135


2357 x 392 x 230


17.3

Bracket weight (kg)

4.6

Packing weight (kg)

27.3 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200



74

Wind load (N)

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz



56

55

70

790－960 X

Unit: mm

1710－2180 X

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790－960 MHz

1710－2180 MHz



Hz M 80 21 － 10 17 XX 0/ D 96 0－ 79



75



790－862

1710－2180

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°


0－12 , continuously adjustable 0°

Gain (dBi)

6°

12°

0°

6°

12°

0°


6°

12°

0°

4°

8°

0°

4°

8°

0°

4°

8°

15.2 15.4 15.1 15.4 15.6 15.2 15.8 16.0 15.6 17.7 17.9 17.5 18.0 18.1 17.9 18.1 18.3 17.9


6°

12°

0°

6°

12°

0°

6°

12°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16

16

17

16

16

17

16

16

17

16

15

17

16

15

17

16

15


69

66

65

65

63

60

11.3

10.7

10

5.2

4.9

4.6


< 1.5


0° ±60°

Max. power per input (W) Intermodulation IM3 (dBc)

Intra-system: ≥ 30 Inter-system (790－960 / 1710－2180 MHz): ≥ 40 Typ. 27

Typ. 28

Typ. 20

Typ. 20

Typ. 10

Typ. 10




Impedance (Ω) Grounding

50 DC Ground Mechanical Properties


1940 x 259 x 135


2372 x 395 x 228


18

Bracket weight (kg)

4.6

Packing weight (kg)

30 50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type

Frontal: 670 (at 150 km/h) Lateral: 345 (at 150 km/h) Rear side: 885 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector


76

Mast diameter (mm)

0－12

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz



Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5





Hz M 80 21 － 10 17 XX 0/ D 96 0－ 79



77




790－862

1710－2180

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°

0°

5°


0°

4°

8°

0°

4°

8°

0°

4°

8°

16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0


5°

10°

0°

5°

10°

0°

5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

19

18

19

19

18

19

18

17

18

16

18

20

16

18

20

16

18


69

66

65


8.4

8

7.5

VSWR

62

60

5.2

4.9

4.6

< 1.5 Intra-system: ≥ 30 Intra-system: ≥ 40


64

Typ. 28

Typ. 29

0°

Typ. 30

Typ. 20

±60°

Typ. 10

Typ. 10






Squint (°)

Avg. 2.5

Tracking (dB)


Impedance (Ω)

50

Grounding



2535 x 259 x 135


2952 x 392 x 230


21

Bracket weight (kg)

5.6

Packing weight (kg)

32.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200

Connector position


78

Connector

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz

Wind load (N)


56

55

Unit: mm

70

790－960 X

1710－2180 X

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

790－960 MHz

1710－2180 MHz



Hz M 80 21 － 10 17 XX 0/ D 96 0－ 79



79



790－862

1710－2180

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°

0°


5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16.4 16.6 16.3 16.7 16.9 16.5 16.9 17 16.7 17.7 17.9 17.5 18 18.1 17.9 18.1 18.3 17.9


5°

10°

0°

5°

10°

0°

5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16

16

17

16

16

17

16

16

17

16

15

17

16

15

17

16

15


69

66

65

65

63

60


8.3

7.8

7.2

5.2

4.9

4.6

VSWR

< 1.5 Intra-system: ≥ 30 Inter-system: ≥ 40


0° ±60°


Typ. 27

Typ. 28

Typ. 20

Typ. 20

Typ. 10

Typ. 10







2535 x 259 x 135


3042 x 400 x 228

0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃) Wind load (N) Wind speed (km/h) Connector Connector position RET Type

-40 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) Max. operational: 150 Survival: 200 4 x 7/16 DIN Female Bottom Internal motor

RET Protocols

AISG 1.1 / AISG 2.0

RET Connector


80


Antenna: 19.0 Bracket: 5.6 Packing: 36.2

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz

Weight (kg)


Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5





Hz M 80 21 － 10 17 XX 0/ D 96 0－ 79



81

DXX-790-960/1710-2180-65/65-17i/18i-M/M-C Model: ADU4518C0 Preliminary Issue Electrical Properties Frequency range (MHz)

1710－2180 880－960 1710－1880 1850－1990 1920－2180 +45°, -45° 0－10, continuously adjustable 0－8, continuously adjustable 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8° 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.0 18.3 17.9 18.2 18.5 18.1 18.2 18.5 17.9 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8° 19 18 19 19 18 19 18 17 18 16 18 20 16 18 20 16 18 69 66 65 64 62 60 8.4 8 7.5 5.2 4.9 4.6 < 1.5 Intra-system: ≥ 30 Typ. 28 Typ. 29 Typ. 30 Typ. 20 Typ. 10 Typ. 10 250 (at 50 ℃ ambient temperature) 200 (at 50 ℃ ambient temperature) 450 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier) Avg. 2.5 Avg. 1.0 (within 10dB HBW) 50 DC Ground

790－862

Polarization Electrical downtilt (°) 0° 16.6 Side lobe suppression for first side 0° lobe above horizon (Typ.) (dB) 19 Horizontal 3dB beam width (°) Vertical 3dB beam width (°) VSWR Isolation between ports (dB) Front to back ratio, copolar (dB) 0° Cross polar ratio (dB) ±60° Max. power per input (W) Total power per combined input (W) Intermodulation IM3 (dBc) Squint (°) Tracking (dB) Impedance (Ω) Grounding Gain (dBi)

790－960 824－894

Mechanical Properties

Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position




82

Wind load (N)

2535 x 259 x 135 2952 x 392 x 230 21 5.6 32.5 0－8 50－115 Fiberglass Light grey -55 .. +65 Frontal: 910 (at 150 km/h) Lateral: 470 (at 150 km/h) Rear side: 1200 (at 150 km/h) 150 200 2 x 7/16 DIN Female Bottom

79 0－ 96 0/ 17 1 DX 0－ 21 X 80 M Hz

Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt (°) Mast diameter (mm) Radome material Radome colour Operational temperature (℃)

DXX-790-960/1710-2690-65/65-16i/18.5i-M/M Model: ADU451604 Preliminary Issue Electrical Properties 790－960


790－862

824－894

1710－2690 880－960

Polarization

1710－1990

1990－2200

2490－2690

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°

0°


5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

15.4 15.6 15.3 15.6 15.8 15.4 16.0 16.1 15.8 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8


5°

10°

0°

5°

10°

0°

5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16

16

17

16

16

17

16

16

17

17

16

17

17

16

17

17

16


69

66

64

10.3

9.9

9.2


62

60

4.3

4.1

3.5



64

0° ±60°


Typ. 28

Typ. 28

Typ. 20

Typ. 20

Typ. 10

Typ. 10





Impedance (Ω)

50

Grounding



1995 x 298 x 148


2350 x 410 x 250


23

Bracket weight (kg)

4.6

Packing weight (kg)

34


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position


Hz M 90 26 － 10 17 XX 0/ D 96 0－ 79


Frontal: 540 (at 150 km/h) Lateral: 245 (at 150 km/h) Rear side: 860 (at 150 km/h) 150 200 4 x 7/16 DIN Female Bottom


83

DXX-790-960/1710-2690-65/65-17i/18.5i-M/M Model: ADU451712 Preliminary Issue Electrical Properties 790－960


790－862

824－894

1710－2690 880－960

Polarization

1710－1990

1990－2200

2490－2690

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°

0°


5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16.4 16.6 16.3 16.6 16.8 16.4 17.0 17.1 16.8 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8


5°

10°

0°

5°

10°

0°

5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16

16

17

16

16

17

16

16

17

17

16

17

17

16

17

17

16


69

66

64


7.9

7.6

7.1

VSWR

62

60

4.3

4.1

3.5



64

0° ±60°


Typ. 28

Typ. 28

Typ. 20

Typ. 20

Typ. 10

Typ. 10





Impedance (Ω)

50

Grounding



2598 x 298 x 148


2950 x 410 x 250


27

Bracket weight (kg)

5.6 38 0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃) Wind load (N)



150


200






84


79 0－ 96 0/ 17 1 DX 0－ 26 X 90 M Hz

Packing weight (kg)



824－894

880－960

1710－1880

Polarization

1850－1990

1920－2170

0

0

+45° , -45°

VSWR

≤ 1.5 (°)

Gain

(dBi)

Side lobe suppression for first side lobe above horizon

0

7

14

0

7

14

0

4

8

4

4

8

14.8 14.7 14.6 15.3 15.2 15.0 17.0 17.2 16.9 17.3 17.5 17.2 17.6 17.8 17.5

(°)

0

7

14

0

7

14

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16

Horizontal 3dB beam width (°) Vertical 3dB beam width (°)

67

65

67

65

63

15.3

14.5

8.5

7.5

7.0


≥30


8

≥28

≥25

0°

≥18

±60°

≥ 10


0－14


0－8 ≤-150 (2 x 43 dBm carrier)


500

250

Impedance (Ω)

50

Grounding


Dimensions (H x W x D) (mm)

1390 x 368 x 99


1666 x 492 x 220

Net weight (kg)

18.2

Bracket weight (kg)

4.6

Packing weight (kg)

27.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass


-55 .. +65 Frontal: 570 (v=150 km/h) Lateral: 150 (v=150 km/h) Rear side: 570 (v=150 km/h)

Wind load (N) Max. wind velocity (km/h)

200

Connector

4 x 7/16 DIN Female

824－960 X

1710－2170 X

85

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



86


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz


DXX-824-960/1710-2170-65/65-15i/17.5i-M/M-C Model: ADU451707


824－894

880－960

1710－1880

Polarization

1850－1990

1920－2170

0

0

+45° , -45°

VSWR

≤ 1.5 (°)

Gain

(dBi)


0

7

14

0

7

14

0

4

8

4

8

14.7 14.6 14.5 15.2 15.1 15.0 16.8 17.0 16.7 17.1 17.3 17.0 17.3 17.5 17.2 0

7

14

0

7

14

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16


67

65

15.3

14.5


67

65

63

8.5

7.5

7.0

≥30


≥28

≥25

0°

≥18 ≥ 10

±60°


0－14


0－8 ≤-150 (2 x 43 dBm carrier)


300

200

Max. power per combined input (W)

500

Impedance (Ω)

50

Grounding



1390 x 368 x 99


1666 x 492 x 220

Net weight (kg)

18.2

Bracket weight (kg)

4.6

Packing weight (kg)

27.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

2 x 7/16 DIN Female

824－960 X +45°

4

(°)



8

1710－2170 X -45°

+45°

-45°

87

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

C

C

7/16 (F)

7/16 (F)


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



88


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz




824－894

880－960

1710－1880

Polarization

1850－1990

1920－2170

0

0

+45° , -45°

VSWR

≤ 1.5 (°)

Gain

(dBi)


0 0

(dBi)

18


8

0

4

8

0

4

8

4

4

8

0

17

16

18

4

8

0

17

16

18

4

8

0

17

16

18

4

8

0

17

16

18

16

63

11.5

10.5

8.5

7.5

7.0

≥28

≥25

0°

≥18

±60°

≥ 10 0－8




300

200


500

Impedance (Ω)

50

Grounding



1925 x 368 x 99


2232 x 492 x 220

Net weight (kg)

22.5

Bracket weight (kg)

7.8

Packing weight (kg)

36.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass



Max. wind velocity (km/h)

200

Connector

2 x 7/16 DIN Female

1710－2170 X -45°

17

65


+45°

8

67


824－960 X

8

4

65

≥30

Wind load (N)

4

67



8

15.7 15.8 15.6 15.9 16.1 15.8 16.8 17.0 16.7 17.1 17.3 17.0 17.3 17.5 17.2

(°)


4

+45°

-45°

89

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

C

C

7/16 (F)

7/16 (F)


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



90


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz




824－894

880－960

1710－1880

Polarization

1850－1990

1920－2170

0

0

+45° , -45°

VSWR

≤ 1.5 (°)

Gain

(dBi)


0

4

8

0

4

8

0

4

8

4

4

8

15.8 16.0 15.7 16.0 16.2 15.9 17.0 17.2 16.9 17.3 17.5 17.2 17.6 17.8 17.5

(°)

0

4

8

0

4

8

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16


67

65

67

65

63

11.5

10.5

8.5

7.5

7.0


≥30


8

≥28

≥25

0°

≥18

±60°

≥ 10


0－8




500

250

Impedance (Ω)

50

Grounding



1925 x 368 x 99


2232 x 492 x 220

Net weight (kg)

22.5

Bracket weight (kg)

7.8

Packing weight (kg)

36.5


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

2 x 7/16 DIN Female

824－960 X

1710－2170 X

91

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



92


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz




824－894

880－960

1710－1880

Polarization

1850－1990

1920－2170

0

0

+45° , -45°

VSWR

≤ 1.5 (°)

Gain

(dBi)


0

4

8

0

4

8

0

4

8

4

8

16.7 16.8 16.5 17.1 17.2 16.9 16.7 16.9 16.6 17.0 17.2 16.9 17.3 17.5 17.2 0

4

8

0

4

8

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16

67

65


8.3

7.2


67

65

63

8.0

7.5

7.0

≥30


≥28

≥25

0°

≥18 ≥ 10

±60°


0－8




300

200


500

Impedance (Ω)

50

Grounding



2449 x 368 x 99


2756 x 492 x 220

Net weight (kg)

26.7

Bracket weight (kg)

7.8

Packing weight (kg)

40.2


0－15

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

2 x 7/16 DIN Female

824－960 X +45°

4

(°)



8

1710－2170 X -45°

+45°

-45°

93

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

C

C

7/16 (F)

7/16 (F)


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



94


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz


DXX-824-960/1710-2170-65/65-17.5i/18i-M/M Model: ADU451801


824－894

880－960

Polarization

1710－1880

1850－1990

1920－2170

+45° , -45°

VSWR

≤ 1.5

Gain (dBi)

17.0

17.5

17.0

17.5

18.0

Typ. 18

Typ. 18

Typ. 18

Typ. 18

Typ. 18


65

63

67

65

63


8.5

7.5

8.2

7.5

7.0



≥30


≥27

≥25

0°


Typ. 20 ≥ 10

±60°


0－10

0－8




500

250

Impedance (Ω)

50

Grounding



2449 x 368 x 99


2756 x 492 x 220

Net weight (kg)

30

Bracket weight (kg)

7.8

Packing weight (kg)

41.9


0－15

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

4 x 7/16 DIN Female

824－960 X

1710－2170 X

95

Hz M 70 21 － 10 17 XX 0/ D 96 4－ 82

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

DXX-824-960/1710-2170-65/65-17.5i/18i-M/M Model: ADU451801

824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



96


82 4－ 96 0/ 17 1 DX 0－ 21 X 70 M Hz



Electrical Properties 2 x (1710－2200)


1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°



Gain (dBi)

0°

5°

10°

0°

5°

10°

0°

5°

10°

0°

5°

10°

17.0

17.4

17.1

17.3

17.7

17.4

17.6

18.0

17.4

17.5

18.0

17.4

0°

5°

10°

0°

5°

10°

0°

5°

10°

0°

5°

10°

18

17

17

19

18

18

19

18

17

19

18

17


67

64

61

60


7.5

7.0

6.6

6.2

VSWR

< 1.5


≥ 30


Typ. 28

0°

Typ. 22

±60°

Typ. 10





Squint (°)

Avg. 2

Tracking (dB)


Impedance (Ω)

50

Grounding



1311 x 323 x 89


1737 x 422 x 200


12.8

Bracket weight (kg)

4.6

Packing weight (kg)

21.5


0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200

Connector Hz M 00 22 0－ 71 /1 X 00 DX 22 － 10 17

Connector position


97


43

36

59

31

L - Left Column

1710－2200 X +45°

7/16 (F)

R - Right Column

Unit: mm

1710－2200 X

-45°

7/16 (F)

+45°

-45°

7/16 (F)

7/16 (F)




98


17 10 － 22 00 /1 7 DX 10－ X 22 00 M Hz


DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R Model: ADU4518R1 Preliminary Issue Electrical Properties 2 x (1710－2200)


1710－1880

1850－1990

Polarization

1920－2170 +45°, -45°



Gain (dBi)

0°

5°

17.5

17.4

0°

5°

17

16


10°

0°

5°

17.6

17.5

10°

0°

5°

16

17

16

17.0


68

65


7.5

7.0

10°

0°

5°

18.0

17.9

10°

0°

5°

15

17

16

17.2

VSWR

< 1.5


≥ 30


Typ. 28

0°

Typ. 18


2170－2200

10°

5° 17.9

10°

0°

5°

10°

15

17

16

15

61

60

6.5

6.2

Typ. 10

±60°






0° 18.0

17.4

Typ. 5 Typ. 3 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1315 x 323 x 89


1807 x 442 x 182


14

Bracket weight (kg)

4.6

Packing weight (kg)

20.8


0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N)



150


200


4 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0

RET Connector


99

Hz M 00 22 0－ 71 /1 X 00 DX 22 － 10 17

RET Protocols

10° 17.2

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R Model: ADU4518R1 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






10 0


17 10 － 22 00 /1 7 DX 10－ X 22 00 M Hz


DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M Model: ADU451902



1710－1880

1850－1990

Polarization

1920－2170

2170－2200

+45°, -45°



Gain (dBi)

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

18.5

18.7

18.6

18.9

19.1

18.8

19.1

19.4

18.9

19.1

19.3

18.8

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

20

17

16

20

17

17

20

18

17

20

18

17


67

65

62

60


5.0

4.7

4.5

4.1

VSWR

< 1.5


≥ 30


Typ. 28

0°

Typ. 25

±60°

Typ. 10





Impedance (Ω)

50

Grounding



1954 x 323 x 89


2365 x 417 x 200


17.3

Bracket weight (kg)

4.6

Packing weight (kg)

26.3


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200


Connector position


1 10


43

36

59

31

L - Left Column

1710－2200 X +45°

7/16 (F)

R - Right Column

Unit: mm

1710－2200 X

-45°

7/16 (F)

+45°

-45°

7/16 (F)

7/16 (F)




10 2


17 10 － 22 00 /1 7 DX 10－ X 22 00 M Hz





1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45°, -45°



Gain (dBi)

0°

5°

17.3

17.4

0°

5°

18

17


10°

0°

5°

17.6

17.8

10°

0°

5°

16

18

17

17.2

10°

0°

5°

17.8

18.0

10°

0°

5°

16

18

17

17.5

10°

0°

5°

17.8

18.0

10°

0°

5°

10°

16

18

17

16

17.6


69

65

65

62


6.5

6.0

5.2

4.8

VSWR

< 1.5


≥ 30


Typ. 27

0°

Typ. 20

±60°

Typ. 10





Squint (°)

Typ. 5

Tracking (dB)

Typ. 3 (within 10dB HBW)

Impedance (Ω)

50

Grounding



1410 x 299 x 89


1855 x 435 x 190


14

Bracket weight (kg)

4.6

Packing weight (kg)

23


0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200


Connector position

4 x 7/16 DIN Female (Long neck) Bottom

10° 17.3

3 10


56

43

54

Unit: mm L - Left Column

R - Right Column

1710－2690 X

+45°

7/16 (F)

1710－2690 X

-45°

+45°

7/16 (F)

7/16 (F)

-45°

7/16 (F)

1710－2200 MHz

2200－2690 MHz




10 4


17 10 － 26 90 /1 7 DX 10－ X 26 90 M Hz


DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R Model: ADU4518R6 Preliminary Issue Electrical Properties 2 x (1710－2690)


1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45°, -45°



Gain (dBi)

0°

6°

17.3

17.4

0°

6°

12°

18

17

16


12° 17.2

0°

6°

12°

17.6

17.8

0°

6°

12°

18

17

16

17.5

0°

6°

12°

17.7

18.0

0°

6°

12°

18

17

16

17.5

0°

6°

17.8

18.0

0°

6°

12°

17

17

16


66

63

60

60


6.5

6.2

5.2

4.7

VSWR

< 1.5


≥ 30


Typ. 28

0°

Typ. 20

±60°

Typ. 10





Impedance (Ω)

50

Grounding



1425 x 323 x 89


1770 x 422 x 200


15.6

Bracket weight (kg)

4.6

Packing weight (kg)

24.5


0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200



RET Connector


5 10

Hz M 90 26 0－ 71 /1 X 90 DX 26 － 10 17

RET Protocols

12° 17.3

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R Model: ADU4518R6 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






10 6


17 10 － 26 90 /1 7 DX 10－ X 26 90 M Hz





1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45°, -45°



Gain (dBi)

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

18.1

18.3

18.2

18.4

18.6

18.5

18.9

19.2

19.1

19.2

19.4

17.3

0°

3°

6°

0°

3°

6°

0°

3°

6°

0°

3°

6°

20

20

16

20

20

17

18

18

18

17

17

18


69

67

65

60


4.9

4.5

4.1

3.7

VSWR

< 1.5


≥ 30


Typ. 27

0°

Typ. 20

±60°

Typ. 10





Impedance (Ω)

50

Grounding



1930 x 299 x 89


2390 x 440 x 190


17.5

Bracket weight (kg)

4.6

Packing weight (kg)

28.3


0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200


Connector position

4 x 7/16 DIN Female (Long neck) Bottom

7 10


56

43

54

Unit: mm L - Left Column

R - Right Column

1710－2690 X

+45°

7/16 (F)

1710－2690 X

-45°

+45°

7/16 (F)

7/16 (F)

-45°

7/16 (F)

1710－2200 MHz

2200－2690 MHz




10 8


17 10 － 26 90 /1 7 DX 10－ X 26 90 M Hz


DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18.5i-M/M/M-R Model: ATR4518R2 Preliminary Issue Electrical Properties Frequency range (MHz)

790－862

1710－2690

880－960

1710－1990

Polarization

1920－2170

2490－2690

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°


4°

8°

0°

4°

8°

0°

4°

15.1 15.3 15.0 15.6 15.7 15.4 17.9 17.7 17.3 18.3 18.1 17.5 18.5 18.3 17.8


5°

10°

0°

16

16

17


68

64

64

62

60

10.2

9.7

5.2

4.8

4.0


5°

10°

0°

16

16

17

VSWR

5°

10°

0°

17

16

17

4°

8°

0°

17

16

17

16

Typ. 28

0°

Typ. 18

Typ. 17

±60°

Typ. 10

Typ. 10





Impedance (Ω) Grounding



2065 x 298 x 148


2350 x 450 x 248


32

Bracket weight (kg)

4.6

Packing weight (kg)

42

Mechanical downtilt (°) Mast diameter (mm)

0－8 50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h)

RET Type

17

Typ. 28


Connector position

8°

Intra-system: ≥ 28 Inter-system: ≥ 30


Connector

4°

< 1.5



8°

Frontal: 565 (at 150 km/h) Lateral: 255 (at 150 km/h) Rear side: 890 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0

RET Connector


9 10

0/ 96 z 0－ H 88 M 2/ 90 86 26 X X 0－ 0－ X 79 171 D

RET Protocols

DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18.5i-M/M/M-R Model: ATR4518R2 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






11 0


79 0 17 －8 10 62 － /88 DX 269 0－ XX 0M 96 Hz 0/


DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M Model: ATR451500



790－862

2 x (1710－2180)

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



7°

14°

0°

7°

14°

0°

7°


0°

7°

14°

0°

7°

14°

0°

7°

14°

14.7 14.8 14.5 15.0 14.8 14.7 15.0 14.8 14.6 Gain (dBi)

Bottom

14.6 14.5 14.3 15.0 14.9 14.5 15.3 15.2 14.7

Top

14.5 14.5 14.0 14.9 14.7 14.1 15.1 15.0 14.3


7°

14°

0°

17

15

19


69

68

67

15.5

14.8

13.8


7°

14°

0°

18

16

19

7°

14°

0°

18

15

17

VSWR

0° ±60°


17

15

18

7°

14°

0°

7°

14°

18

15

17

17

15

63

61

60

13.6

12.8

12.1

Typ. 28

Typ. 28

Typ. 26

Typ. 20

Typ. 10

Typ. 10





Squint (°)

Avg. 2.5

Tracking (dB)


Impedance (Ω)

50

Grounding

DC Ground


1454 x 259 x 135


1872 x 392 x 230


15.1

Bracket weight (kg)

4.6

Packing weight (kg) Mechanical downtilt (°)

24.5 0－16

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200

1 11

/ 80 21 － z 10 MH 17 0 0/ 18 96 －2 XX 0－ 10 DX 79 17

Connector position

0°

Intra-system: ≥ 30 Inter-system (790 - 960 / 1710 - 2180 MHz): ≥ 40 Inter-system (1710 - 2180 / 1710 - 2180 MHz): ≥ 30


Connector

14°

< 1.5



7°


DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M Model: ATR451500

61

44

17 56

55 70 T - Top Column B - Bottom Column

790－960 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2180 Bottom X +45°

-45°

7/16 (F)

7/16 (F)

790－960 MHz

Unit: mm

1710－2180 Top X +45°

-45°

7/16 (F)

7/16 (F)

1710－2180 MHz (Bottom)

1710－2180 MHz (Top)




11 2


79 0－ 17 96 10 0/1 － 71 DX 218 0－ XX 0M 21 Hz 80 /


DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M Model: ATR451602v01



790－862

2 x (1710－2180)

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



6°

12°

0°

6°

12°

0°

6°


0°

6°

12°

0°

6°

12°

0°

6°

12°

16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6 Gain (dBi)

Bottom

15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0

Top

16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7


6°

12°

0°

17

15

19


69

66

65

64

62

60

10.7

10.1

9.4

Bottom: 9.6 Top: 8.5




6°

12°

0°

18

16

19

6°

12°

0°

18

15

17

VSWR

17

15

18

6°

12°

0°

6°

12°

18

15

17

17

15

Typ. 28

Typ. 29

0°

Typ. 26

Typ. 20

±60°

Typ. 10

Typ. 10





Squint (°)

Avg. 2.5

Tracking (dB)


Impedance (Ω)

50

Grounding



2098 x 259 x 135


2514 x 392 x 230


19.4

Bracket weight (kg)

4.6


29.7 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200

3 11

/ 80 21 － z 10 MH 17 0 0/ 18 96 －2 XX 0－ 10 DX 79 17

Connector position

0°

< 1.5


Connector

12°

Intra-system: ≥ 30 Inter-system (790 - 960 / 1710 - 2180 MHz): ≥ 40 Inter-system (1710 - 2180 / 1710 - 2180 MHz): ≥ 35



6°



61

44

17 56

55 70 T - Top Column B - Bottom Column

790－960 X +45°

-45°

7/16 (F)

7/16 (F)

1710－2180 Bottom X +45°

-45°

7/16 (F)

7/16 (F)

790－960 MHz

Unit: mm

1710－2180 Top X +45°

-45°

7/16 (F)

7/16 (F)


1710－2180 MHz (Top)




11 4


79 0－ 17 96 10 0/1 － 71 DX 218 0－ XX 0M 21 Hz 80 /


DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M-R Model: ATR4516R0 Preliminary Issue Electrical Properties 790－960


790－862

2 x (1710－2180)

824－894

880－960

Polarization Electrical downtilt (°)


Gain (dBi)

1710－1880

1850－1990

1920－2180

+45° , -45° 6°

12°

0°

6°

12°

0°


6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

15.2 15.4 15.1 15.4 15.6 15.2 15.8 16.0 15.6 Bottom

15.6 15.6 15.2 15.9 16.0 15.4 16.1 16.1 15.6

Top

15.5 15.5 15.1 15.9 16.0 15.1 16.0 16.0 15.4


6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

0°

6°

12°

16

16

17

16

16

17

16

16

17

16

15

17

16

15

17

16

15


69

66

65

66

63

60

11.3

10.7

10







0° ±60°


Typ. 27

Typ. 27

Typ. 20

Typ. 20

Typ. 10

Typ. 10







2100 x 259 x 135


2520 x 312 x 195


24

Bracket weight (kg)

4.6

Packing weight (kg)

36


0－12 50－115

Radome material

Fiberglass

Radome colour

Light grey




150


200



RET Connector


5 11

/ 80 21 － z 10 MH 17 0 0/ 18 96 －2 XX 0－ 10 DX 79 17

RET Protocols

DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M-R Model: ATR4516R0 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5




Issue: 2012-06-01


6



11


79 0－ 17 96 10 0/1 － 71 DX 218 0－ XX 0M 21 Hz 80 /





790－862

2 x (1710－2180)

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



5°

10°

0°

5°

10°

0°

5°


0°

5°

10°

0°

5°

10°

0°

5°

10°

16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0 Gain (dBi)

Bottom

17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0

Top

16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9


5°

10°

0°

5°

10°

0°

17

19

19

5°

10°

0°

17

18

15

16

19

19


69

66

65

63

62

60


8.4

8

7.5




VSWR

20

20

15

5°

10°

0°

5°

10°

15

16

18

17

15

Typ. 28

Typ. 29

0°

Typ. 28

Typ. 20

±60°

Typ. 10

Typ. 10





Squint (°)

Avg. 2.5

Tracking (dB)


Impedance (Ω)

50

Grounding



2680 x 259 x 135


3107 x 392 x 230


23

Bracket weight (kg)

5.6


35 0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)



150


200

7 11

/ 80 21 － z 10 MH 17 0 0/ 18 96 －2 XX 0－ 10 DX 79 17

Connector position

0°

< 1.5


Connector

10°

Intra-system: ≥ 30 Inter-system (790－960 / 1710－2180 MHz): ≥ 40 Inter-system (1710－2180 / 1710－2180 MHz): ≥ 40



5°



61

44

17 56

55 T - Top Column

790－960 X +45°

-45°

7/16 (F)

7/16 (F)

Unit: mm

70 B - Bottom Column

1710－2180 Bottom X +45°

-45°

7/16 (F)

7/16 (F)

790－960 MHz

1710－2180 Top X +45°

-45°

7/16 (F)

7/16 (F)


1710－2180 MHz (Top)




11 8


79 0－ 17 96 10 0/1 － 71 DX 218 0－ XX 0M 21 Hz 80 /


DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M-R Model: ATR4517R0 Preliminary Issue Electrical Properties 790－960


790－862

2 x (1710－2180)

824－894

880－960

Polarization

1710－1880

1850－1990

1920－2180

+45°, -45°



5°

10°

0°

5°

10°

0°


5°

10°

0°

5°

10°

0°

5°

10°

0°

5°

10°

16.4 16.6 16.3 16.7 16.9 16.5 16.9 17.0 16.7 Gain (dBi)

Bottom

16.5 16.7 16.1 16.8 16.9 16.3 17.1 17.2 16.6

Top

16.4 16.5 16.0 16.7 16.7 16.0 16.8 17.0 16.2


5°

10°

0°

5°

10°

0°

16

16

17

5°

10°

0°

16

16

17

16

16

17


69

66

65

66

63

60


8.3

7.8

7.2




VSWR

10°

0°

16

15

17

5°

10°

0°

5°

10°

16

15

17

16

15



5°

0° ±60°


Typ. 27

Typ. 27

Typ. 20

Typ. 20

Typ. 10

Typ. 10







2685 x 259 x 135


3312 x 312 x 195

Weight (kg) Mechanical downtilt (°) Mast diameter (mm)

Antenna: 30.5 Bracket: 5.6 Packing: 43.2 0－8 50－115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃) Wind load (N) Wind speed (km/h) Connector Connector position RET Type

-40 .. +65 Frontal: 970 (at 150 km/h) Lateral: 500 (at 150 km/h) Rear side: 1285 (at 150 km/h) Max. operational: 150 Survival: 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0

RET Connector


9 11

/ 80 21 － z 10 MH 17 0 0/ 18 96 －2 XX 0－ 10 DX 79 17

RET Protocols

DXXX-790-960/1710-2180/1710-2180-65/65/65-17i/17i/17i-M/M/M-R Model: ATR4517R0 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






12 0


79 0－ 17 96 10 0/1 － 71 DX 218 0－ XX 0M 21 Hz 80 /


DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18.5i/18.5i-M/M/M-R Model: ATR4518R4 Preliminary Issue Electrical Properties 790－960


790－862

2 x (1710－2690)

824－894

880－960

Polarization

1710－1990

1920－2170

2490－2690

+45°, -45°



Gain (dBi)

5°

10°

0°

5°

10°

0°


5°

10° 0°

4°

8°

0°

4°

8°

0°

4°

15.4 15.6 15.3 15.6 15.8 15.4 16.0 16.1 15.8 18.3 18.3 17.8 18.3 18.5 18.0 18.2 18.3 18.0


5°

10°

0°

5°

10°

0°

5°

10° 0°

4°

8°

0°

16

16

17

16

16

17

16

16

17

16

17


66

64

62

66

63

60

10.3

9.9

9.2

5.2

4.8

4.0


17

4°

8°

0°

4°

8°

17

16

16

16

15



0° ±60°


Typ. 28

Typ. 28

Typ. 18

Typ. 17

Typ. 10

Typ. 10







1950 x 349 x 148


2390 x 499 x 248


29

Bracket weight (kg)

4.6

Packing weight (kg)

40


0－12 50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type

8°

Frontal: 840 (at 150 km/h) Lateral: 310 (at 150 km/h) Rear side: 1075 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0

RET Connector


1 12

/ 90 26 － z 10 MH 17 0 0/ 69 96 －2 XX 0－ 10 DX 79 17

RET Protocols

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18.5i/18.5i-M/M/M-R Model: ATR4518R4 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






12 2


79 0－ 17 96 10 0/1 － 71 DX 269 0－ XX 0M 26 Hz 90 /


DXXX-824-960/1710-2170/1710-2170-65/65/65-16.5i/16.5i/16i-M/M/M Model: ATR451601


824－894

880－960

1710－1880

Polarization VSWR

1920－2170

0

0

≤ 1.5 (°)

Gain

1850－1990

+45° , -45° 0

824－960 (dBi)

4

8

0

4

8

0

1710－2170 Bottom (dBi)

8

8

4

8

15.3 15.5 15.2 15.6 15.7 15.4 15.8 16.0 15.7


(°)

0

4

8

0

4

8

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16


67

65

67

65

63

11.5

10.8

10.7

9.9

9.2


≥ 30


≥ 28

≥ 25

0°

Typ. 20 ≥ 10

±60°


0－8




500

250

Impedance (Ω)

50

Grounding



1925 x 368 x 99


2232 x 492 x 220

Net weight (kg)

24.7

Bracket weight (kg)

7.7

Packing weight (kg)

38.1


0－8

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

6 x 7/16 DIN Female

824－960 X

4

15.8 16.0 15.7 16.1 16.2 15.9 16.3 16.5 16.2

1710－2170 Top (dBi)


4

16.0 16.2 15.9 16.3 16.5 16.2

1710－2170 X

1710－2170 X

-45°

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

3 12

/ 70 21 － z 10 MH 17 0 0/ 17 96 －2 XX 4－ 10 DX 82 17

+45°


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



12 4


82 4－ 17 96 10 0/1 － 71 DX 217 0－ XX 0M 21 Hz 70 /




824－894

880－960

1710－1880

Polarization VSWR

1920－2170

0

0

≤ 1.5 (°)

Gain

1850－1990

+45° , -45° 0

824－960 (dBi)

4

8

0

4

8

0

4

8

4

8

4

1710－2170 Bottom (dBi)

16.7 17.0 16.7 16.9 17.3 16.9 17.3 17.5 17.2

1710－2170 Top (dBi)

16.3 16.6 16.3 16.6 16.9 16.6 16.9 17.1 16.9


(°)

0

4

8

0

4

8

0

4

8

0

4

8

0

4

8

(dBi)

18

17

16

18

17

16

18

17

16

18

17

16

18

17

16


67

65

67

65

63


8.3

7.2

8.0

7.5

7.0


≥ 30


≥ 25 0°

≥ 18

±60°

≥ 10


0－8




500

250

Impedance (Ω)

50

Grounding



2449 x 368 x 99


2756 x 492 x 220

Net weight (kg)

30.5

Bracket weight (kg)

7.8

Packing weight (kg)

44


0－15

Mast diameter (mm)

50－115

Radome material

Fiberglass




200

Connector

6 x 7/16 DIN Female

824－960 X

8

16.8 17.0 16.8 17.3 17.5 17.2

1710－2170 X

1710－2170 X

-45°

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

5 12

/ 70 21 － z 10 MH 17 0 0/ 17 96 －2 XX 4－ 10 DX 82 17

+45°


824－870 MHz

870－916 MHz

910－960 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz

1710－1880 MHz

1850－1990 MHz

1920－2170 MHz



12 6


82 4－ 17 96 10 0/1 － 71 DX 217 0－ XX 0M 21 Hz 70 /


DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M Model: ATR4518R3 Preliminary Issue Electrical Properties 1710－2170 2490－2690 1710－1990 2490－2690 1710－1990 1920－2170 Polarization +45°, -45° Electrical downtilt (°) 0－10, continuously adjustable 0－10, continuously adjustable 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° Gain (dBi) 17.5 17.6 17.4 17.8 18.0 17.6 17.9 18.2 17.4 17.2 17.3 17.0 17.6 17.8 17.2 17.6 17.9 17.0 Side lobe suppression for first side 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° lobe above horizon (Typ.) (dB) 18 17 16 18 17 16 18 17 16 17 16 15 17 16 15 17 16 15 Horizontal 3dB beam width (°) 69 65 60 69 65 60 Vertical 3dB beam width (°) 6.5 6.0 4.8 6.5 6.0 4.8 VSWR < 1.5 Intra-system: ≥ 30 Isolation between ports (dB) Inter-system: ≥ 30 Front to back ratio, copolar (dB) Typ. 27 0° Typ. 18 Cross polar ratio (dB) ±60° Typ. 10 Max. power per input (W) 250 (at 50 ℃ ambient temperature) Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) Impedance (Ω) 50 Grounding DC Ground Frequency range (MHz)

1710－2690 1920－2200

Mechanical Properties Antenna dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Antenna net weight (kg) Bracket weight (kg) Packing weight (kg) Mechanical downtilt (°) Mast diameter (mm) Radome material Radome colour Operational temperature (℃) Wind load (N) Max. operational wind speed (km/h) Survival wind speed (km/h) Connector Connector position RET Type RET Protocols RET Connector

1410 x 323 x 89 1855 x 435 x 190 16.5 4.6 25.5 0－16 50－115 Fiberglass Light grey -40 .. +65 Frontal: 610 (at 150 km/h) Lateral: 115 (at 150 km/h) Rear side: 685 (at 150 km/h) 150 200 6 x 7/16 DIN Female Bottom Internal motor AISG 1.1 / AISG 2.0 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female


Any previous catalogue issues become invalid. / 70 21 0－ Hz 71 /1 0M 90 269 26 XX － 0－ X 10 249 D 17

Issue: 2012-06-01


7 12

DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M Model: ATR4518R3 Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30








1

2

3

4

DC

n/c

RS-485B

n/c


6

7

8


n/c



Standards:

5






12 8


17 10 － 24 26 90 90 － /17 DX 269 10 XX 0M －2 Hz 17 0/


DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18.5i/18i/18i-M/M/M/M-R

Model: AQU4518R0

Preliminary Issue Electrical Properties Frequency range (MHz)

790－960 790－894

1710－2690

880－960

1710－2170

1710－1990 1920－2170 2490－2690 1710－1990 1920－2170

Polarization

2490－2690

+45°, -45° 0－10, continuously adjustable

Electrical downtilt (°) 0°

Gain (dBi)

5°

10°

0°

5°


0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

17.5 17.6 17.4 17.5 17.6 17.4 17.5 17.6 17.4 17.8 18.0 17.6 17.9 18.2 17.4 17.2 17.3 17.0 17.6 17.8 17.2 17.6 17.9 17.0


5°

10°

0°

5°

10°

0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

0°

4°

8°

16

16

17

16

16

17

17

16

17

17

16

16

16

15

17

16

16

17

16

16

16

16

15


65

63

66

63

10.2

9.6

5.2

4.8


66

63

60

4

5.2

4.8

4



60

Typ. 28

Typ. 28

Typ. 18

Typ. 17

Typ. 10

Typ. 10



0° ±60°



Impedance (Ω) Grounding

50 DC Ground


1990 x 349 x 148


2390 x 499 x 248


34

Bracket weight (kg)

4.6


49 0－12

Mast diameter (mm)

50－115

Radome material

Fiberglass

Radome colour

Light grey


-40 .. +65

Wind load (N)



150


200



RET Connector


9 12

/ z 90 H 26 0M － 69 10 2 17 0－ 0/ 49 X 96 0/2 XX 0－ 17 DX 79 －2 10 17

RET Protocols

DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/ 65-16i/18.5i/18i/18i-M/M/M/M-R

Model: AQU4518R0

Preliminary Issue RET Properties RET Type

Internal motor

RET Protocols

AISG 1.1 / AISG 2.0


DC 10－30







RET Connector

Pin assignment according AISG

1

2

3

4

5

6

7

8

DC

n/c

RS-485B

n/c

RS-485A

DC in/out

DC return

n/c



Standards: y EN 60950-1 (Safety)




Issue: 2012-06-01


0



13


17 79 10 0－－ 21 960 70 /1 7 / DX 249 10－ XX 0－ 2 X 26 690 90 / M Hz


DX-2300-2700-60-18i-M Model: A25451804

Electrical Properties 2300－2500 2500－2700 +45° , -45°

Frequency range (MHz) Polarization VSWR

≤1.45 (°) (dBi) (°) (dB)Typ.


2 17.0 2 18

6 17.3 6 17

10 17.0 10 16

2 17.3 2 18

6 17.6 6 17


64

60

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt (°) Max. CW input power (W) Impedance (Ω) Grounding

7.0

6.5

10 17.1 10 16

≥30 Typ. 30 15 2－10 250 50 DC Ground


1060 x 155 x 79 1550 x 260 x 160 6 2.7 10.6


0－16


50－115 Fiberglass -55 .. +65 Frontal: 120 (v=150 km/h) Lateral: 90 (v=150 km/h) Rear side: 180 (v=150 km/h) 200 2 x N-50KF

Wind load (N) Max. wind velocity (km/h) Connector

2300－2500 MHz



Hz

1 13

M 00 27 － DX

00

23

Issue: 2012-06-01

2300－2700 X +45°

-45°

N-50KF

N-50KF

2500－2700 MHz


DXX-2300-2700/2300-2700-65/65-18i/18i-M Model: A25451803

Electrical Properties 2300－2500 2500－2700 +45° , -45°

Frequency range (MHz) Polarization VSWR

≤1.45 (°) (dBi) (°) (dB)Typ.


2 17.0 2 18

6 17.3 6 17

10 17.0 10 16

2 17.3 2 18

6 17.6 6 17


65

65

Vertical 3dB beam width (°) Isolation between ports (dB) Front to back ratio, copolar (dB) Cross polar ratio (dB) Electrical downtilt (°) Max. CW input power (W) Impedance (Ω) Grounding

7.0

6.5

10 17.1 10 16

≥30 Typ. 28 15 2－10 250 50 DC Ground


1060 x 289 x 85 1400 x 405 x 175 11 4.5 18.3 0－16 50－115 Fiberglass -55 .. +65 Frontal: 230 (v=150 km/h) Lateral: 100 (v=150 km/h) Rear side: 340 (v=150 km/h) 200 4 x N-50KF

Wind load (N) Max. wind velocity (km/h) Connector

2300－2500 MHz



2300－2700 X

2300－2700 X

+45°

-45°

+45°

-45°

N-50KF

N-50KF

N-50KF

N-50KF

2500－2700 MHz


13 2


23 00 － 27 00 /2 3 DX 00－ X 27 00 M Hz


CX-1710-2690-65-18i-M Model: A264518S0 Preliminary Issue Electrical Properties 1710－2690


1710－1990

1920－2200

Polarization

2200－2490

2490－2690

+45° , -45°



Gain (dBi)

0°

5°

17.4

17.3

0°

5°

18

17


10°

0°

5°

17.8

17.6

10°

0°

5°

16

18

17

17.2

10°

0°

5°

18.0

17.8

10°

0°

5°

16

18

17

17.5

10°

0°

5°

18.0

17.8

10°

0°

5°

10°

16

18

17

16

17.6


66

64

62

59


5.8

5.2

4.6

4.2

VSWR

< 1.5


≥ 30


Typ. 28

0°

Typ. 18

±60°

Typ. 10





Impedance (Ω)

10° 17.3

50

Grounding



1425 x Φ 236


2490 x 400 x 400


26.3

Packing weight (kg)

32.8

Radome material

Fiberglass

Radome colour

Light grey


-55 .. +65

Wind load (N)

245 (at 150 km/h)


150


200

Connector


Connector position

Bottom



Hz

3 13

M 90 26 － DX

10

17

Issue: 2012-06-01


B

Antenna Line Products

DTMA08-008

Model: ATA801100 (AISG 1.1)

DTMA08-009


Product Description The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.

Features y High linearity and low noise performance. y Balanced LNA design and power failure bypass for high reliability. y Light weight and compact design. y Variable gain: 8 - 16 dB, default gain: 12 dB. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.

Appearance and Block Diagram

M DT A

5 13

DTMA08-008


DTMA08-009


Tx Specifications Frequency range (MHz)

791－821

Bandwidth (MHz)

30

Insertion loss* (dB)

Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak

Intermodulation products in Rx band (dBm)

≤ -117 (2 TX carriers at +43 dBm) Rx Specifications


832－862

Bandwidth (MHz)

30 ≥ 18 (DC ON) ≥ 13 (DC OFF)

Return loss(dB) Insertion loss in by-pass mode (dB)

≤ 3 (DC OFF)

Gain (dB)

8－16 (0.5 dB Step, Default gain: 12 dB)

Noise figure** (dB)

Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)

Output 1dB compression (dBm)

≥ 8 (12 dB Gain)

OIP3 (dBm)

≥ 20 (12 dB Gain) Electrical properties CWA Mode

AISG Mode

DC supply voltage (V)

8.5－15

9－30

Operating current per TMA (mA) (without RET)

40－110

40－370

Alarm management (mA)

150－280

AISG


< 3.5 Environmental Specification

Operating temperature range (℃)

-40 ... +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3


10 (8/20 us) Mechanical Specification

Packing weight (kg) DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector

365 x 515 x 215 ≤ 6.1 (with brackets) ≤ 7.4 Approx. 5.5 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V－30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30－125 // Optional: 40－140 4 x 7/16 DIN Female (Long neck)

A

DTMA weight (kg)

13 6

Packing dimensions (W x H x D) (mm)

190 x 240 x 120 (without connectors, without brackets)

DT M

DTMA dimensions (W x H x D) (mm)

DTMA08-008


DTMA08-009


Unit: mm

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a DTMA. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.




M DT A

7 13

DTMA09-014


DTMA09-015


Product Description The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.


13 8

DT M

A


DTMA09-014


DTMA09-015



925－950

Bandwidth (MHz)

25


Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




880－905

Bandwidth (MHz)

25 ≥ 18 (DC ON) ≥ 13 (DC OFF)


≤ 3.0 (DC OFF)

Gain (dB)



Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)


≥ 8 (12 dB Gain)

OIP3 (dBm)


AISG Mode


8.5－15

9－30


40－110

40－370


150－280

AISG




-40 … +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3




198 x 308 x 70.5 (without connectors, without brackets)


315 x 515 x 190

DTMA weight (kg)

≤ 5.5 (with brackets)

Packing weight (kg)

≤ 6.6

DTMA Volume (L) AISG connector Mounting Mast diameter (mm) Connector

Approx. 4.3 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V－30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30－125 // Optional: 40－140 4 x 7/16 DIN Female (Long neck)

M DT A

9 13

DTMA09-014


DTMA09-015


Unit: mm


Issue: 2012-06-01


A



14 0


DT M


DTMA09-010


DTMA09-011


Product Description The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data communication quality.



M DT A

1 14

DTMA09-010


DTMA09-011



925－960

Bandwidth (MHz)

35


Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




880－915

Bandwidth (MHz)

35 ≥ 18 (DC ON) ≥ 13 (DC OFF)


≤ 3.0 (DC OFF)

Gain (dB)



Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)


≥ 8 (12 dB Gain)

OIP3 (dBm)


AISG Mode


8.5－15

9－30


40－110

40－370


150－280

AISG




-40 ... +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3





A

DTMA weight (kg)

14 2



DT M


DTMA09-010


DTMA09-011


Unit: mm





M DT A

3 14

DTMA09-016


DTMA09-017




14 4

DT M

A


DTMA09-016


DTMA09-017



935－960

Bandwidth (MHz)

25


Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




890－915

Bandwidth (MHz)

25 ≥ 18 (DC ON) ≥ 13 (DC OFF)


≤ 3.0 (DC OFF)

Gain (dB)



Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)


≥ 8 (12 dB Gain)

OIP3 (dBm)


AISG Mode


8.5－15

9－30


40－110

40－370


150－280

AISG




-40 … +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3






315 x 515 x 190

DTMA weight (kg)


Packing weight (kg)

≤ 6.6



M DT A

5 14

DTMA09-016


DTMA09-017


Unit: mm


Issue: 2012-06-01


A



14 6


DT M


DTMA18-022


DTMA18-023



Features y High linearity and low noise performance. y Power failure bypass for high reliability. y Light weight and compact design. y Wall mounting and mast mounting. y Built-in lightning protection up to 10 kA. y Support AISG 1.1 and AISG 2.0 protocol.


M DT A

7 14

DTMA18-022


DTMA18-023



1805－1880

Bandwidth (MHz)

75


Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




1710－1785

Bandwidth (MHz)

75

Return loss(dB)

≥ 18 (DC ON) ≥ 13 (DC OFF)

Insertion loss in by-pass mode (dB)

≤ 3.0 (DC OFF)

Gain (dB)

12


Avg. < 1.4 (+22 ... +28 ℃)


≥ 12

OIP3 (dBm)

≥ 24 Electrical properties CWA Mode

AISG Mode


8.5－15

9－30


40－120

40－370


150－280

AISG




-40 ... +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3





A

DTMA weight (kg)

14 8


160 x 220 x 100 (without connectors, without brackets)

DT M


DTMA18-022


DTMA18-023


Unit: mm





M DT A

9 14

DTMA21-006


DTMA21-007

Model: ATA212001 (AISG 2.0



15 0

DT M

A


DTMA21-006


DTMA21-007



2110－2170

Bandwidth (MHz)

60


Avg. < 0.25

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




1920 - 1980

Bandwidth (MHz)

60

Return loss(dB)

≥ 18 (DC ON) ≥ 15 (DC OFF)


≤ 3.0 (DC OFF)

Gain (dB)

12 ±1


Avg. < 1.2 (+22 ... +28 ℃)


≥ 12

OIP3 (dBm)


AISG Mode


8.5－15

9－30


40－120

40－370


150－280

AISG




-40 … +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3






265 x 395 x 195

DTMA weight (kg)


Packing weight (kg)

≤ 4.0



M DT A

1 15

DTMA21-006


DTMA21-007


Unit: mm


Issue: 2012-06-01


A



15 2


DT M


DTMA26-012


DTMA26-013





M DT A

3 15

DTMA26-012


DTMA26-013



2620－2690

Bandwidth (MHz)

70


Avg. < 0.4

Return loss (dB)

≥ 18

Input power (W)

< 160 (+52 dBm) CW < 2000 (+63 dBm) peak




2500－2570

Bandwidth (MHz)

70

Return loss(dB)

≥ 18 (DC ON) ≥ 13 (DC OFF)


≤ 3.0 (DC OFF)

Gain (dB)

12 ±1


Avg. < 1.3 (+22 ... +28 ℃)


≥ 12

OIP3 (dBm)


AISG Mode


8.5－15

9－30


40－120

40－370


150－280

AISG




-40 ... +65

IP rating

IP67

MTBF (hours)

> 1,000,000

EMC

ETS 300 342-3


10 (8/20 us) Mechanical Specification 160 x 210 x 54.5 (without connectors, without brackets) 265 x 395 x 195

DTMA weight (kg)


Packing weight (kg)

≤ 4.0

Mounting Mast diameter (mm) Connector

Wall mounting: with 4 screws (max. 8 mm diameter) Mast mounting Default: 30－125 // Optional: 40－140 4 x 7/16 DIN Female (Long neck)

A

AISG connector

Approx. 1.8 8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V－30V DC, pin3: RS485B, pin5: RS485A, pin7: DC return, other pins: not connected)

15 4

DTMA Volume (L)

DT M

DTMA dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

DTMA26-012


DTMA26-013


Unit: mm





M DT A

5 15

DC-0010-2 Model: ACOMD2H00

Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

15 6

Co

m

bi

ne

rs

ACOMD2H00


Electrical Properties Model

ACOMD2H00 Band 1

698－960

Band 2

1710－2700

Pass band (MHz)


DC/AISG transparency

Port 1 ←→ Port 3

Typ. < 0.2 (698 MHz－960 MHz)


Typ. < 0.25 (1710 MHz－2700 MHz)


Stop


By-pass (max. 2500 mA)

Isolation (dB)

> 40

VSWR Input power (W)

< 1.28 Port 1, Port 2

Intermodulation products (dBm)

< 300 < -117 (3rd order; with 2 x 43 dBm) Environmental Specification


-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Combiner dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm) Combiner weight (kg) Packing weight (kg) Mounting Mast diameter (mm) Connector

Double Unit: 130 x 190 x 105 (without connectors, without mounting brackets) 265 x 415 x 245 Double Unit: ≤ 4.3 ≤ 5.4 Wall mounting // Mast mounting Default: 40－135 7/16 DIN Female (Long neck)

7 15

rs

ne

bi

m

Co


Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

ne

rs

www.huawei.com

15 8

Issue: 2012-06-01


bi



m


Co


DC-0003-2 Model: ACOMD2H02 Preliminary Issue Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMD2H02

9 15

rs

ne

bi

m

Co

DC-0003-2 Model: ACOMD2H02 Preliminary Issue Electrical Properties Model

ACOMD2H02 Band 1

790－1880

Band 2

1920－2200

Pass band (MHz) Typ. < 0.15 (790 MHz－960 MHz) Insertion loss* (dB)



Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Stop



Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector

7/16 DIN Female (long neck)

Mounting

Wall mounting // Mast mounting

ne

rs

Double Unit: 190 x 154 x 105 (without connectors, without mounting brackets)

bi

16 0

Dimensions (W x H x D) (mm)

40－135

m

Mast diameter (mm)

Double Unit: ≤ 6

Co

Weight (kg)

DC-0003-2 Model: ACOMD2H02 Preliminary Issue





1 16

rs

ne

bi

m

Co



Block Diagram

16 2

Co

m

bi

ne

rs

ACOMD2H04



ACOMD2H04 Band 1

790－862

Band 2

880－960

Pass band (MHz)




Typ. < 0.3 (790 MHz－862 MHz)


Typ. < 0.25 (880 MHz－960 MHz)


Stop



Isolation (dB)

> 50


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // outdoor

IP rating

IP67





3 16

rs

ne

bi

m Co



ne

rs

www.huawei.com

4 16

Issue: 2012-06-01


bi



m


Co


DC-0012-2

Model: ACOMD2H05

DC-0021-2

Model: ACOMD2H07


Block Diagram

ACOMD2H05

ACOMD2H07

5 16

rs

ne

bi

m

Co

DC-0012-2

Model: ACOMD2H05

DC-0021-2

Model: ACOMD2H07


ACOMD2H05

ACOMD2H07

Band 1

1710－1880

Band 2

1920－2200

Pass band (MHz)




Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Stop





Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector

Default: 40－135 7/16 DIN Female (Long neck)

rs

Mast diameter (mm)


ne

Mounting

≤ 5.7

16 6

Packing weight (kg)

Double Unit: ≤ 4.8

bi

Combiner weight (kg)

365 x 260 x 210

m



Co

Combiner dimensions (W x H x D) (mm)

DC-0012-2

Model: ACOMD2H05

DC-0021-2

Model: ACOMD2H07





7 16

rs

ne

bi

m

Co

DC-0026-2

Model: ACOMD2H06

DC-0022-2

Model: ACOMD2H08


Block Diagram

16 8

m

bi

ne

rs

ACOMD2H08

Co

ACOMD2H06

DC-0026-2

Model: ACOMD2H06

DC-0022-2

Model: ACOMD2H08


ACOMD2H06

ACOMD2H08

Band 1

1710－1880

Band 2

1920－2200

Pass band (MHz)




Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Stop





Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67





9 16

rs

ne

bi

m

Co

DC-0026-2

Model: ACOMD2H06

DC-0022-2

Model: ACOMD2H08


ne

rs

www.huawei.com

17 0

Issue: 2012-06-01


bi



m


Co




Block Diagram

ACOMD2H09

1 17

rs

ne

bi

m

Co



ACOMD2H09 Band 1

790－862

Band 2

880－960

Pass band (MHz)




Typ. < 0.3 (790 MHz－862 MHz)


Typ. < 0.25 (880 MHz－960 MHz)


Stop



Isolation (dB)

> 50


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


rs

Mast diameter (mm)


ne

Mounting

≤ 7.8

17 2

Packing weight (kg)


bi


260 x 365 x 210

m



Co







3 17

rs

ne

bi

m

Co



Block Diagram

17 4

Co

m

bi

ne

rs

ACOMD2H10



ACOMD2H10 Band 1

698－960

Band 2

1710－2200

Pass band (MHz)




Typ. < 0.15 (698 MHz－960 MHz)


Typ. < 0.15 (1710 MHz－2200 MHz)


Stop



Isolation (dB)

> 40


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67





5 17

rs

ne

bi

m

Co



ne

rs

www.huawei.com

17 6

Issue: 2012-06-01


bi



m


Co




Block Diagram

ACOMD2H11

7 17

rs

ne

bi

m

Co



ACOMD2H11 Band 1

698－960

Band 2

1710－2200

Pass band (MHz)




Typ. < 0.15 (698 MHz－960 MHz)


Typ. < 0.15 (1710 MHz－2200 MHz)


Stop



Isolation (dB)

> 40


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


rs

Mast diameter (mm)


ne

Mounting

≤ 5.4

17 8

Packing weight (kg)


bi


265 x 415 x 245

m



Co







9 17

rs

ne

bi

m

Co



Block Diagram

18 0

Co

m

bi

ne

rs

ACOMD2H12



ACOMD2H12 Band 1

698－960

Band 2

2490－2700

Pass band (MHz)




Typ. < 0.15 (698 MHz－960 MHz)


Typ. < 0.15 (2490 MHz－2700 MHz)


Stop



Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67





1 18

rs

ne

bi

m

Co



ne

rs

www.huawei.com

18 2

Issue: 2012-06-01


bi



m


Co




Block Diagram

ACOMD2H13

3 18

rs

ne

bi

m

Co



ACOMD2H12 Band 1

698－960

Band 2

2490－2700

Pass band (MHz)




Typ. < 0.15 (698 MHz－960 MHz)


Typ. < 0.15 (2490 MHz－2700 MHz)


Stop



Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


rs

Mast diameter (mm)


ne

Mounting

≤ 5.4

18 4

Packing weight (kg)


bi


265 x 415 x 245

m



Co







5 18

rs

ne

bi

m

Co

DC-0006-2 Model: ACOMD2L03


Block Diagram

18 6

Co

m

bi

ne

rs

ACOMD2L03



ACOMD2L03 Band 1

1710－2200

Band 2

2490－2700

Pass band (MHz)




Typ. < 0.15 (1710 MHz－2200 MHz)


Typ. < 0.15 (2490 MHz－2700 MHz)




Stop

Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67





7 18

rs

ne

bi

m

Co



ne

rs

www.huawei.com

18 8

Issue: 2012-06-01


bi



m


Co




Block Diagram

ACOMD2L04

9 18

rs

ne

bi

m

Co



ACOMD2L04 Band 1

1710－2200

Band 2

2490－2700

Pass band (MHz)




Typ. < 0.15 (1710 MHz－2200 MHz)


Typ. < 0.15 (2490 MHz－2700 MHz)




Stop

Isolation (dB)

> 45


< 1.28 Port 1, Port 2




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


rs

Mast diameter (mm)


ne

Mounting

≤ 4.2

19 0

Packing weight (kg)


bi


365 x 260 x 210

m



Co







1 19

rs

ne

bi

m

Co

TC-0011-2

Model: ACOMT2H00

TC-0015-2

Model: ACOMT2H02


Block Diagram

19 2

m

bi

ne

rs

ACOMT2H02

Co

ACOMT2H00

TC-0011-2

Model: ACOMT2H00

TC-0015-2

Model: ACOMT2H02


Pass band (MHz)



ACOMT2H00 Band 1

790－960

Band 2

1710－1880

Band 3

1920－2200


Typ. < 0.15 (790 MHz－960 MHz)


Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Stop

Stop


Stop





Isolation (dB)

> 45


ACOMT2H02

< 1.28 Port 1, Port 2, Port3




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67





3 19

rs

ne

bi

m

Co

TC-0011-2

Model: ACOMT2H00

TC-0015-2

Model: ACOMT2H02

Unit: mm

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

ne

rs

www.huawei.com

19 4

Issue: 2012-06-01


bi



m


Co


TC-0025-2

Model: ACOMT2H01

TC-0016-2

Model: ACOMT2H03


Block Diagram

ACOMT2H01

ACOMT2H03

5 19

rs

ne

bi

m

Co

TC-0025-2

Model: ACOMT2H01

TC-0016-2

Model: ACOMT2H03


Pass band (MHz)



ACOMT2H01 Band 1

790－960

Band 2

1710－1880

Band 3

1920－2200


Typ. < 0.15 (790 MHz－960 MHz)


Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Stop

Stop


Stop





Isolation (dB)

> 45


ACOMT2H03





-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


rs

Mast diameter (mm)


ne

Mounting

≤ 7.3

19 6

Packing weight (kg)


bi


365 x 260 x 210

m



Co


TC-0025-2

Model: ACOMT2H01

TC-0016-2

Model: ACOMT2H03





7 19

rs

ne

bi

m Co

TC-0009-2 Model: ACOMT2M00 Preliminary Issue Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

8 19

Co

m

bi

ne

rs

ACOMT2M00

TC-0009-2 Model: ACOMT2M00 Preliminary Issue Electrical Properties Model

Pass band (MHz)

ACOMT2M00 Band 1

790－1880

Band 2

1920－2200

Band 3

2490－2700 Typ. < 0.15 (790 MHz－960 MHz)


Typ. < 0.25 (1710 MHz－1880 MHz)




Typ. < 0.25 (1920 MHz－2200 MHz)


Typ. < 0.2 (2490 MHz－2700 MHz)


Stop




Stop

Isolation (dB)

> 45






-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


Mounting


Weight (kg) Mast diameter (mm) Dimensions (W x H x D) (mm)

Double Unit: ≤ 7 40－135 Double Unit: 215 x 200 x 105 (without connectors, without mounting brackets)

9 19

rs

ne

bi

m

Co

TC-0009-2 Model: ACOMT2M00 Preliminary Issue

Unit: mm

HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a combiner. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

ne

rs

www.huawei.com

20 0

Issue: 2012-06-01


bi



m


Co


QC-0007-2 Model: ACOMQ2M00 Preliminary Issue Product Description y Built-in lightning protection up to 10 kA. y Can be used as a combiner near the BTS or in a reciprocal function near the antenna. y Designed for co-siting purposes and feeder sharing y Suitable for indoor or outdoor applications. y Wall or mast mounting.

Block Diagram

ACOMQ2M00

1 20

rs

ne

bi

m

Co

QC-0007-2 Model: ACOMQ2M00 Preliminary Issue Electrical Properties Model

ACOMQ2M00 Band 1

790－960

Band 2

1710－1880

Band 3

1920－2200

Band 4

2490－2700

Pass band (MHz)




Typ. < 0.15 (790 MHz－960 MHz)


Typ. < 0.25 (1710 MHz－1880 MHz)


Typ. < 0.25 (1920 MHz－2200 MHz)


Typ. < 0.2 (2490 MHz－2700 MHz)


Stop


Stop


By- pass (max. 2500 mA)


stop

Isolation (dB)

> 45


< 1.28 Port 1, Port 2 Port 3, Port 4




-40 … +65

Application scene

Indoor // Outdoor

IP rating

IP67



Connector


Mounting


ne

rs


bi

20 2

Dimensions (W x H x D) (mm)

40－135

m

Mast diameter (mm)


Co

Weight (kg)

QC-0007-2 Model: ACOMQ2M00 Preliminary Issue





3 20

rs

ne

bi

m

Co

C

Accessories for RET Systems

Antenna and RCU configuration list

Antenna Model

RCU AISG 1.1

AISG 2.0

Antenna Model

A90451701

ADU4518R3

A90451704

ADU4518R0

A19452101 A19451703

ARCU01104

ARCU02001

A25451804

ATR451704v01 ARCU01101

ATR4516R0

ARCU01102

ATR4517R0

ARCU01103

A264518S0

ADU451806

ARCU01100

A90451702v01

ADU451811

ARCU01103

ADU451815

ARCU01100

A90451709

ADU451707

ARCU01103

A90451802v01

ATR451703

ARCU01102

A90451805v01

ATR451601

ARCU01100

A90451706

ARCU02000

A19451601

A26451900

A19451602

ADU451816

A19451800v01

ADU451901

A19451810v01

A79451500v01

A19451802v01

A79451600v01

A19451704

A79451700v01

A19451705

A19451505

A264518R0 ARCU01109

ARCU02004

ARCU01109

ARCU02004

A90451705v01

A26451800

A19451811

AISG 2.0

ATR451500 ATR451602v01

ADU451700

AISG 1.1

ADU4518C0

A25451803

ADU451801

RCU

ADU451604

A19451902

ADU451712

A194518R0

ADU4516R0

ADU451819

ADU4517R0

ADU451902

ADU4518R6

ADU4518R1

ATR4518R2

ADU451503

ATR4518R4

ADU451602v01

ATR4518R3

ADU451807v01

AQU4518R0

U RC 5 20

RCU Model: ARCU01100 (AISG 1.1) ARCU01101(AISG 1.1) ARCU01102 (AISG 1.1) ARCU01103 (AISG 1.1) ARCU02000 (AISG 2.0)

RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical downtilt. RCU is suitable for daisy chain solution.


DC 10－30 < 600 (motor activated) < 50 (stand by)

Current (mA) Adjustment time (full range) (min)

<2


<4 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female

Connectors Pin assignment according AISG

1

2

3

4

5

DC

n/c

RS-485B

n/c

RS-485A

6

7

8

DC in/out DC return

n/c

Profile: Aluminium coated / Cover: Aluminium coated

Housing material Color

Grey

Weight (g)

650


-40 … +65

Protection class

IP24

Dimensions (L x W x H) (mm)

205 x 65.5 x 56

Packing size (L x W x H) (mm)

268 x 105 x 95

Daisy chain in: Male Daisy chain out: Female

Drainage Hole

Appearance

Bottom view of RCU

Male

Female

HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact the technical support personnel of Huawei.



20 6


RC U


RCU Model: ARCU01104 (AISG 1.1) ARCU02001 (AISG 2.0)



DC 10－30 < 600 (motor activated) < 50 (stand by)


<2


<4 2 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male // Daisy chain out: Female


1

2

3

4

5

DC

n/c

RS-485B

n/c

RS-485A

6

7

8

DC in/out DC return

n/c


Housing material Color

Grey

Weight (g)

600


-40 … +65

Protection class

IP24

Dimensions (L x W x H) (mm)

200 x 56 x 47


268 x 105 x 95

Daisy chain in: Male Daisy chain out: Female

Drainage Hole

Appearance

Drainage Hole

Bottom view of RCU

Male

Female





U RC 7 20

RCU Model: ARCU01109 (AISG 1.1) ARCU02004 (AISG 2.0)



DC 10－30 < 10 (motor activated) < 0.5 (stand by)






1

2

DC

n/c

Housing material

3

4

5

RS-485B

n/c

RS-485A

6

7

8

DC in/out DC return

n/c


Color

RAL 7035

Weight (g)

600


-40 … +65

Protection class

IP24 AISG interface (each pin) 3 (10/350 μs) 10 (8/20 μs)

Lightning protection (kA) Dimensions (L x W x H) (mm)

180 x 65 x 54


268 x 105 x 95


Standards:

EN 60950-1 (Safety) EN 55022 (Emission) EN 55024 (Immunity) ETSI EN300386 (1.4.1) FCC part15 Certification: CE、FCC、RoHS、WEEE Daisy chain in: Male

Daisy chain out: Female

Drainage Hole



Male

Female


20 8

Bottom view of RCU

RC U

Appearance

BT-690-2700-001 Model: ABT000001

Features y y y y y

Used to feed DC voltage and OOK control signals into the feeder cable. Low passive intermodulation products, low insertion loss and high power capacity. Ultra wide band design for various communication system. Small volume, light weight. Support AISG 1.1 and AISG 2.0 protocol.

BT = Bias Tee BTS = Base Transceiver Station OOK = On Off Keying

Block Diagram

Port 2 (ANT)

DC/OOK

RF Block

DC Block

Port 1 (BTS)

BT 9 20

BT-690-2700-001 Model: ABT000001

Electrical Properties Frequency range (MHz) Insertion loss (dB)

690－2700 Port 1 ←→ Port 2

≤ 0.1 (690－960 MHz / 1710－2690 MHz) ≤ 0.15 (960－1710 MHz)

Port 1 ←→ Port 2 Isolation for DC signal (dB)

≥ 70 Port 1 ←→ Port DC/OOK

VSWR

Port 1 and Port 2

≤ 1.15 (690－960 MHz / 1710－2690 MHz) ≤ 1.2 (960－1710 MHz)

Input power (W)

Port 1 and Port 2

Avg. ≥ 500 (690 - 960 MHz) Avg. ≥ 250 (1710 - 2690 MHz)

Input current (mA)

Port DC/OOK ←→ Port 2

≤ 2300

DC voltage reduction (V)

Port DC/OOK ←→ Port 2

≤ 1 (when the current is 2300 mA)


0 … +30

RF Impedance (Ω)

50

Intermodulation products (dBc)

< -160 (2 x 43 dBm carrier) Environmental Specification


-40 … +70

Application scene

Indoor or outdoor

IP rating

IP66


3 (10/350 us) Mechanical Specification 48.5 x 151 x 45 (with connectors) 78 x 185 x 58

BT net Weight (kg)

< 0.56

Packing weight (kg)

< 0.60 Port 1 (BTS)

Connectors

Port 2 (Antenna) Port DC/OOK

7/16 DIN Male 7/16 DIN Female SMA Female

21 0


BT

BT Dimensions (W x H x D) (mm)

BT-690-2700-001 Model: ABT000001

Unit: mm




BT 1 21

SBT-690-2700-001

Model: ASBT00001

SBT-690-2700-002

Model: ASBT00002

Features y Convert signals between OOK and RS485. y Low passive intermodulation products, low insertion loss and high power capacity. y Ultra wide band design for various communication system. y Small volume, light weight. y Support AISG 1.1 and AISG 2.0 protocol.

SBT = Smart Bias Tee RCU = Remote Control Unit for remote electrical control of antenna tilt BTS = Base Transceiver Station AISG= Antenna Interface Standards Group

ASBT00001

ASBT00002

21 2

SB

T

Block Diagram

SBT-690-2700-001

Model: ASBT00001

SBT-690-2700-002

Model: ASBT00002

Model

ASBT00001

ASBT00002

Port 1 (Connector type)

Antenna (7－16 DIN Male)

BTS (7－16 DIN Male)

Port 2 (Connector type)

Feeder (7－16 DIN Female)

Feeder (7－16 DIN Female)

AISG (8-pin Connecter Female)

AISG (8-pin Connecter Male)

Port AISG

Electrical Properties Frequency range (MHz) Insertion loss (dB) Isolation for DC signal (dB)

690－2700 Port 1 ←→ Port 2

≤ 0.1 (690－960 MHz / 1710－2690 MHz) ≤ 0.15 (960－1710 MHz)


≥ 70

Port 1 ←→ Port AISG

VSWR

Port 1 and Port 2

≤ 1.15 (690－960 MHz / 1710－2690 MHz) ≤ 1.2 (960－1710 MHz)

Input power (W)

Port 1 and Port 2 Port AISG

Avg. ≥ 500 (690－960 MHz) / Avg. ≥ 250 (1710－2690 MHz) < 2.5 A (+8 … +30 V DC)


+8 … +30

RF impedance (Ω)

50

Intermodulation products (dBc)

< -160 (3rd order, 2 x 43 dBm)


Typ. 0.6

Modem carrier frequency (MHz)

2.176 Environmental Specification


-40 … +70

Application scene

Indoor or outdoor

IP rating

IP67



BT Dimensions (W x H x D) (mm) Packing dimensions (W x H x D) (mm)

75 x 160 x 45 (with connectors) 78 x 185 x 58

SBT net Weight (kg)

< 0.75

Packing weight (kg)

< 0.80

T

SB 3 21

SBT-690-2700-001

Model: ASBT00001

SBT-690-2700-002

Model: ASBT00002

ASBT00001

ASBT00002 Unit: mm HINT Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a SBT. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

Issue: 2012-06-01


T



21 4


SB


AISG Connecting Cables For Remote Electrical Tilt(RET) System

Pin Assignment Female

Male

Pin Number

Signal

1

+12V DC Nominal

2

-48V DC Nominal

3

RS485 B

4

RS485 GND

5

RS485 A

6

10V－30V DC

7

DC retum

8

N/C

Technical Specification Connectors

2 x 8pin AISG female/male 2

IEC60130-9 IEC60130-9 UL2464

2

Cable

2 x 0.25mm + 4 x 0.75mm

Rate current

4A

Protection Class

IP67 (Coupled)

Temperature Range

-40 … 80℃

Color

Black

Single Bend radius

60mm Min.

Multiple Bend radius

120mm Min.

Cable series Length 0.5m 2m 5m

RET System Cable

10m 15m 30m 50m 60m 70m




SG

AI 5 21

AISG Connecting Cables For RRU AISG Output

Pin Assignment Female

Pin Number

Signal

1

Male

Pin Number

Signal

+12V DC Nominal

1

+12V DC Nominal

2

-48V DC Nominal

2

N/C

3

RS485 B

3

RS485 B

4

RS485 GND

5

RS485 A

6

+12V DC Nominal

7

RS 485 GND

4

RS485 GND

5

RS485 A

6

10V－30V DC

7

DC retum

8

N/C

8

N/C

9

RS 485 GND

Technical Specification Connector 1

8pin AISG Male

Connector 2

9pin D9 Male

Cable

4Pair x 24AWG

Rate current

4A

Protection Class

IP67 (Coupled)

Temperature Range

-40 … 80℃

Color

Black

Single Bend radius

60mm Min.

Multiple Bend radius

120mm Min.

IEC60130-9 IEC60130-9

Cable series Length

RRU AISG Cable

3m 5m

Issue: 2012-06-01


SG



21 6


AI


D

Mounting Instructions

Antenna (C1) Installation Guide Part Number: 31043744

Issue: 01

HINT 1. Only qualified personnel are allowed to install the antenna.

Installation Tools

2. Appearance of the actual antenna may differ from the pictures.

Bracket Subassembly

13 mm combination wrench (2 PCS)

Install the bracket

1

(1 PCS)

2

8

2

(1 PCS)

a Gu llat id ion e 21

Assemble the bracket

M8 (2 PCS)

st

1

(1 PCS)

In

Inclinometer

Antenna (C1) Installation Guide Part Number: 31043744

3

Issue: 01

Manually adjust the electrical downtilt angle

The RCU is optional. For details about how to install Ruler Before adjustment

4

the RCU, see the relevant

Adjust angle

After adjustment

RCU Installation Guide.

Install the antenna 1

Ensure the bracket is fully collapsed at 0°.

2

5

Adjust the mechanical downtilt angle

Method 1 Scale of bracket

Finally, tighten all the nuts. Method 2

Precise measurement

Recommended torque: M8 = 18 Nm

Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.



In

Issue: 2012-06-01


n tio la al ide

st Gu

9 21

Antenna (D1) Installation Guide Part Number: 31043740

Issue: 02

HINT 1. Only qualified personnel are allowed to install the antenna.

Installation Tools

2. Appearance of the actual antenna may differ from the pictures.

Bracket Subassembly

13 mm combination wrench (2 PCS) Inclinometer

Install the bracket

M10 (4 PCS)

0

2

(2 PCS)


Assemble the bracket

(1 PCS)

st

1

(1 PCS)

In

16 mm combination wrench (2 PCS)

Antenna (D1) Installation Guide Part Number: 31043740

3

Issue: 02

Manually adjust the electrical downtilt angle

The RCU is optional. For details about how to install Ruler Before adjustment

4

the RCU, see the relevant

Adjust angle

RCU Installation Guide.

After adjustment

Install the antenna 1

2

3

4

Ensure the bracket is fully collapsed at 0°.

5

Adjust the mechanical downtilt angle

Scale of bracket

Method 1

(the actual scale prevails) Finally, tighten all the nuts. Method 2

Precise measurement

Recommended torque: M8 = 20 Nm, M10 = 30 Nm

Before adjustment, adjust the inclinometer to the desired downtilt angle. After adjustment, locate the bead in the inclinometer in the middle.



In

Issue: 2012-06-01


n tio la al ide

st Gu

1 22

DTMA (A) Installation Guide Issue: 01

HINT 1. Only qualified personnel are allowed to install the Dual Tower Mounted Amplifier (DTMA). DTMA and BTS support the same frequency band. 2. DTMAs are installed in the similar manner, this document uses a DTMA2600 (Model: ATA261100) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools 150 mm x 6 mm (5.91 in. x 0.24 in.)

Flat-head screwdriver

Claw hammer

300 mm x 36 mm (12 in. x 1.4 in.)

Φ 10

Adjustable wrench

Hammer drill

Insulation tape

Waterproof tape

Connecting the RF Jumper 1

2

Re. Torque: 25 Nm - 30 Nm (220 lbf.in.- 264 lbf.in.)

3

Wrap tape method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes

4

Cable ties

ANT 0

Connect the jumper to the DTMA

Waterproof and Sealed for Connectors

Tighten the RF jumper

ANT 1

Connect the ANT port on the DTMA to the antenna and other ports to the BTS.

Connecting the AISG Cable CAUTION

2

Tighten the AISG cable by hand, secure the AISG cable.


Connect the AISG cable to the DTMA

Remove the AISG protective lid of DTMA only when you want to connect a DTMA to an RCU. When connecting an RCU to a DTMA, align the concave of the DTMA female connector with the convex of the AISG male connector correctly. For details, see step 1.

st

2

In

1


Connecting the Ground Cable 1

2

Twist off a nut, a spring washer and a flat washer

3

Connect the ground cable to the DTMA

Connect the other connector of the ground cable to ground.

Installing the DTMA CAUTION Pole-Mounting the DTMA: first connect RF jumpers, the AISG cable and the ground cable, then install the DTMA on a pole.

a

Method 1: Pole-Mounting the DTMA

HINT Hoop iron

Screw

Shell

Steel strip

Bracket

1. To partially tighten the hoop iron: press the screw tail into the shell and route the steel strip through the shell. Then press the steel strip towards the pole and strain the steep strip till the steel strip is firmly attached to the pole, as shown in step 1. 2. To release the hoop iron: press the screw tail into the shell, press the steel strip towards the pole, and push the steel strip outwards till the steel strip is released from the shell.

Pole mount hole

1

2

3

Position to install hoop irons

Hoop iron trail into mast mount hole and partially tighten the hoop iron.

Tighten the hoop iron

In n tio la al ide

st Gu

3 22


CAUTION Wall-Mounting the DTMA: first install the DTMA on the wall, then connect RF jumpers, the AISG cable and the ground cable.

b

Method 2: Wall-Mounting the DTMA 1

2 Orientation

Drill holes

Wall

52 mm - 60 mm (2.05 in. - 2.36 in.)

3

4 Install a M8 expansion bolt a

b

Twist off nut, spring washer, flat washer

5

6 Install the DTMA

1

2

Install four M8 expansion bolts

Issue: 2012-06-01


4





st


4

In

3

Combiner (A) Installation Guide Issue: 01

HINT 1. Only qualified personnel is allowed to install the Combiner. Combiner and BTS support the same frequency band. 2. This document uses a TC-0011-2 (Model: ACOMT2H00) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools 150 mm x 6 mm (5.91 in. x 0.24 in.)

Flat-head screwdriver

Claw hammer

300 mm x 36 mm (12 in. x 1.4 in.)

Φ 10

Adjustable wrench

Hammer drill

Insulation tape

Waterproof tape

Connecting the RF Jumper HINT 1. If use the combiner near the antenna, connect the COM port of the Combiner to the Main feeder and other ports to the antenna. 2. If use the combiner near the BTS, connect the COM port of the Combiner to the Main feeder and other ports to the BTS.

1

2 Re. Torque: 25 Nm - 30 Nm (220 lbf.in.- 264 lbf.in.)

Connect the jumper to the Combiner

3

Tighten the RF jumper


Waterproof and Sealed for Connectors

4 Cable ties

Use cable ties fix upside and downside of tape

In n tio la al ide

st Gu

5 22


Connecting the Ground Cable 1

2

Twist off the first nut, spring washer, the first flat washer

3

Connecting the ground cable

Connect the other connector of the ground cable to ground.

Installing the DTMA CAUTION Pole-Mounting the Combiner : first connect the RF jumper and the ground cable, then install the Combiner on a pole.

a

Method 1: Pole-Mounting the Combiner

HINT

Hoop iron Screw

Shell

1. To partially tighten the hoop iron: press the screw tail into the shell and route the steel strip through the shell. Then press the steel strip towards the pole and strain the steep strip till the steel strip is firmly attached to the pole, as shown in step 1.

Steel strip

2. To release the hoop iron: press the screw tail into the shell, press the steel strip towards the pole, and push the steel strip outwards till the steel strip is released from the shell.

Bracket Pole mount hole

1

2

3

Position to install the hoop iron

Hoop iron trail into mast mount hole and partially tighten the hoop iron

Tighten the hoop iron

CAUTION

6

In

st


Wall-Mounting the Combiner: first install the Combiner on the wall, then connect RF jumpers and the ground cable.


b

Method 2: Wall-Mounting the Combiner 1

2 Orientation

Drill holes

Wall

52 mm - 60 mm (2.05 in. - 2.36 in.)

3

4 Install a M8 expansion bolt a

b

Twist off nut, spring washer, flat washer

5

6 Install the Combiner 1

2 Install four M8 expansion bolts

3



In

Issue: 2012-06-01

4


n tio la al ide

st Gu

7 22

RCU (A) Installation Guide Part Number: 31043715

Issue: 05

HINT 1. Only qualified personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to configure the RCU onsite. For details about how to configure the RCU, see the RET Antenna Configuration Guide. 4. This document uses installing the RCU on a dual-band antenna (Model: ADU451801) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

RCU Description

Length x Max mouth width: 300 x 36 mm (12 x 1.4 in.)

Drainage hole

Male

Serial No.

Female

Adjustable wrench

Appearance

Bottom

Top

Sticking the Serial No. Taking out the Serial No. Label

b

Sticking the Serial No. Label

Example Packaging bag

Site Name:

Serial No. label

ABCD

Site No.:

01

Sector No.:

01

Port No.:

1710-2170

HINT 1. Take the serial No. label out, stick the label to the recording form attached in this document, then write down the information.

st


2. Cut the recording form off and provide it to the network management personnel.

8

In

a


Issue: 05

Installing the RCU 1

2

CAUTION 1. Rotate the adjustment screw before installing the RCU. Ensure that the adjustment screw rotates smoothly before installing the RCU. For details, see step 1. 2. When inserting the RCU into the antenna, ensure that two ports match each other. For details, see step 3.

Twist off protective cover

3

4

5

Re. Torque: 10 - 10.5 Nm (89 - 93 lbf.in.)

Particular tighten the RCU

Tighten the RCU

Connecting the AISG Cable 1

2

Protective lid

AISG cable female Tighten the AISG cable

HINT 1. Connect the female connector of Antenna Interface Standards Group (AISG) cable to the male connector of the RCU without removing the protective lid from the female connector of the RCU, see step 1. 2. Connect the other connector of the AISG cable to the SBT or TMA, etc.

In n tio la al ide

st Gu

9 22


Issue: 05

HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU.

Non-Daisy Chain Scenario

b

For particular installation, please contact Huawei Technologies Co., Ltd.

Daisy Chain Scenario

www.huawei.com

Appendix: Recording form

Sector No.: Port No.:



2. Port No. identifies the antenna port in the frequency band where the RCU port is located.


0

Site No.:

1. Write down the information, then cut the recording form off and provide it to the network management personnel. This table is used to identify the information when you configure the RCU.


Site Name:

HINT

st

Stick Serial No.

In

a

RCU (B) Installation Guide Part Number: 31043280

Issue: 04

HINT 1. Only qualified personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to configure the RCU onsite. For details about how to configure the RCU, see the RET Antenna Configuration Guide. 4. This document uses installing the RCU on a single antenna (Model: A19451803) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

RCU Description


Drainage hole

Serial No.

Male Female

Adjustable wrench

Bottom

Appearance

Top

Sticking the Serial No.

a

Taking out the Serial No. Label

b



Site Name:

Serial No. label

ABCD

Site No.:

01

Sector No.:

01

Port No.:

1710-2170

HINT 1. Take the serial No. label out, stick the label to the recording form attached in this document, then write down the information. 2. Cut the recording form off and provide it to the network management personnel.

n tio la al ide

st

In Gu

1 23


Issue: 04


2

3


Turn 180°

4

Install protective cover

5

CAUTION 1. The protective cover rotates smoothly before the RCU can be installed. For details, see step 4. 2. When inserting the RCU into the antenna, ensure that the orientation scoop of the RCU is securely locked into the orientation scoop of the antenna. For details, see step 6.


6

7

8

Re. Torque: 10 - 10.5 Nm (89 - 93 lbf.in.)


Tighten the RCU


2 HINT 1. Connect the female connector of Antenna Interface Standards Group (AISG) cable to the male connector of the RCU without removing the protective lid from the female connector of the RCU, see step 1.


2

Tighten the AISG cable

2. Connect the other connector of the AISG cable to SBT or TMA, etc.

st

AISG cable female

In

Protective lid


Issue: 04

HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU.

a


b



www.huawei.com


Stick Serial No. Site Name: Site No.: Sector No.: Port No.:



In

Issue: 2012-06-01

HINT 1. Write down the information, then cut the recording form off and provide it to the network management personnel. This table is used to identify the information when you configure the RCU. 2. Port No. identifies the antenna port in the frequency band where the RCU port is located.


n tio la al ide

st Gu

3 23

RCU (C) Installation Guide Part Number: 31043741

Issue: 02

HINT 1. Only qualified personnel is allowed to install the Remote Control Unit (RCU). 2. The serial No. attached to the RCU is the same with the serial No. in the packaging bag of installation guide. To avoid serial No. confusion, do not separate the RCU from the installation guide. 3. Install RCU hardware under tower. After the installation is complete, you need to configure the RCU onsite. For details about how to configure the RCU, see the RET Antenna Configuration Guide. 4. This document uses installing the RCU on a tri-band antenna (Model: ATR451704) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

RCU Description


Male

Female

Serial No.

Drainage hole

Adjustable wrench

Appearance

Bottom

Top

Sticking the Serial No. Taking out the Serial No. Label

b



Site Name:

Serial No. label

ABCD

Site No.:

01

Sector No.:

01

Port No.:

1710-2170

HINT

st


1. Take the serial No. label out of packaging bag, stick the label to the recording form attached in this document, then write down the information. 2. Cut the recording form off and provide it to the network management personnel.

4

In

a


Issue: 02


2

3

CAUTION 1. The protective cover rotates smoothly before the RCU can be installed. For details, see step 4. 2. When inserting the RCU into the antenna, ensure that the orientation scoop of the RCU is securely locked into the orientation scoop of the antenna. For details, see step 6.


Adjustment spindle

4

5

6

Re. Torque: 15 - 18 Nm (132 - 159 lbf.in.)


Tighten the RCU


2 HINT 1. Connect the female connector of Antenna Interface Standards Group (AISG) cable to the male connector of the RCU without removing the protective lid from the female connector of the RCU. For details, see step 1.

Protective lid

AISG cable female

Tighten the AISG cable

2. Connect the other connector of the AISG cable to SBT or TMA, etc.

In n tio la al ide

st Gu

5 23


Issue: 02

HINT 1. In the non-daisy chain scenario, an RCU connects with one AISG cable. 2. In the daisy chain scenario, connect each RCU to an AISG cable, then connect the female connector of the upper-level RCU to the male connector of the lower-level RCU with an AISG cable. Do not remove the protective lid from the female connector of the lowest-level RCU. 3. When installing three RCUs on a tri-band antenna (Model: ATR451704), install them in different directions. To be specific, the side with the nameplate of the RCU on the left faces towards the left, the side with the nameplate of the RCU in the middle faces upwards, and the side with the nameplate of the RCU on the right faces towards the right. See the following figures. For details about installation directions of RCUs on other antennas, see the RET Antenna FAQs.


b



www.huawei.com


Sector No.: Port No.:



2. Port No. identifies the antenna port in the frequency band where the RCU port is located


6

Site No.:

1. Write down the information, then cut the recording form off and provide it to the network management personnel. This table is used to identify the information when you configure the RCU.


Site Name:

HINT

st

Stick Serial No.

In

a

BT (A) Installation Guide Issue: 01

HINT 1. Only qualified personnel is allowed to install the OOK Bias Tee (BT). 2. If the BT is installed indoors, no tapes are required to wrap and seal the connector. 3. This document uses a BT (Model: ABT000001) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

OOK Bias Tee Description


Insulation tape

Adjustable wrench

Waterproof tape

DC Connector

Female 8 mm combination wrench

Male

Cable ties

Installing the BT 1

2

3 Re. Torque: 25 - 30 Nm (220 - 264lbf.in.)

Connect the jumper to female of BT

Tighten the jumper


In n tio la al ide

st Gu

7 23

BT (A) Installation Guide Issue: 01

Installing the BT 4

5

6

Torque range: 15 - 18 Nm (132 - 159 lbf.in.)

Connect the male of BT to DDPU

Tighten the BT

7

8


9 Torque range: 0.8 - 1.1 Nm (7 - 9 lbf.in.)

Connect the DC Power Cable to BT

Tighten the DC Power Cable


10 Cable ties

Cable ties

Use cable ties to fix both ends of the tape

www.huawei.com

8

Issue: 2012-06-01





st


In


SBT (A) Installation Guide Issue: 01

HINT 1. Only qualified personnel is allowed to install the Smart Bias Tee (SBT). 2. This document uses a SBT (Model: ASBT00001) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

SBT Description


Adjustable wrench

Insulation tape

Male

Female Cable ties

AISG Female

Waterproof tape

Installing the SBT 1

2

3 Torque range: 15 - 18 Nm

Connect Male of SBT to antenna, ensure that two ports match each other.

Particular tighten the SBT

Tighten the SBT

In n tio la al ide

st Gu

9 23

SBT (A) Installation Guide Issue: 01

Installing the BT 4

5

Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes

6

Connect the jumper to Female of SBT

7

8

Particular tighten the jumper

9 Cable ties


Cable ties

Tighten the jumper




2 HINT 1. Remove the AISG protective lid of SBT only when you want to connect the SBT to the RCU.



0




st

Tighten the AISG cable by hand

In

Ensure that two ports match each other

2. Connect the male connector of AISG cable to the female connector of the SBT, ensure that connectors are securely locked, see step 1. Tighten the AISG cable by hand, ensure the AISG cable connector is not loose, see step 2

SBT (B) Installation Guide Issue: 01

HINT 1. Only qualified personnel is allowed to install the Smart Bias Tee (SBT). 2. If the SBT is installed indoors, no tapes are required to wrap and seal the connector. 3. This document uses a SBT (Model: ASBT00002) as an example. Actual products may differ from the pictures, the actual ones prevail.

Installation Tools

SBT Description


Adjustable wrench

Female

Insulation tape AISG Male

Male Cable ties

Waterproof tape

Installing the SBT 1

2

3

Torque range: 15 - 18 Nm

Connect Male of SBT to RRU, ensure that two ports match each other.

Particular tighten the SBT

Tighten the SBT

In n tio la al ide

st Gu

1 24

SBT (B) Installation Guide Issue: 01

Installing the BT 4

5


6

Connect the jumper to Female of SBT

7

8

Particular tighten the jumper

9

Cable ties


Tighten the jumper

Cable ties Wrap tapes method : one layer Insulation tape + three layer waterproof tapes + three layer Insulation tapes



1

HINT 1. Remove the AISG protective lid of SBT only when you want to connect the SBT to the CCU.



2




st

Tighten the AISG cable by hand

In

Connect the female connector of AISG cable to the male connector of SBT

2. Align the concave of the AISG cable female connector with the convex of the SBT male connector correctly, see step 1. Tighten the AISG cable by hand, ensure the AISG cable connector is not loose, see step 2.

Hungary Holland Hub Dubai Hub China

Mexico West Africa

India

Brazil

Current Supply Route

5 supply centers

Future Supply Route

2Hubs, 81 service branches

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice , HUAWEI, and

are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC. THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE

HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Email: [email protected] Version No.: M3-022337-20120601-C-1.0

PURPOSE ONLY AND CONSTITUTES NEITHER AN OFFER NOR AN ACCEPTANCE. HUAWEI MAY CHANGE THE INFORMATION AT ANY TIME WITHOUT NOTICE.

www.huawei.com

HW-196379

Recommend Documents