HVAC-Duct-Work-Installation-Method-Statement-pdf.pdf

9/7/2014

HVAC Duct Work Installation Method Statement

Home

Disclaimer

Project HSE Plan

Method Statement Template Project Execution Plan

Construction Method Statements

Inspection Checklists

Customer Support

Request A Method Statement

Download Method Statements

Sheet Metal Ducting langdonsheetmetal.com

Sure-Clamp Spiral Clamp Together Ductwork & Fittings

Method Statement Free Download RSS You are here: Home » Met hod St at ement s » Const ruct ion Met hod St at ement s » HVAC Met hod St at ement s » Duct Works » Met hod St at ement s » Const ruct ion Met hod St at ement s » HVAC Met hod St at ement s » HVAC Duct Work Inst allat ion Met hod St at ement


SPECIAL RECENT POSTS

Installation of Marble and Granite Tiles on floor, stairs, walls and counters April 4th, 2014 This m ethod statem ent covers the detailed procedure to be followed for Supply & Installation of [...]

November 5, 2012 | webmast er

Method Of Statement For Installation of wires and cables - Wiring March 29th, 2014 Below is the list of equipm ent / Tools required for installation of wires and cables, which cab be u[...]

Tw eet

Method Statement For Installation & Testing of SMATV System

2

Sheet Metal Ducting

HVAC Duct Work & Accessories Installation Method Statement

langdonsheetmetal.com

Sure-Clamp Spiral Clamp Together Ductwork & Fittings

1. PURPOSE This method statement cover on site installation of pre-fabricated duct-work systems manufactured from hot dipped galvanized steel sheet to S.M.A.C.N.A. 2. SCOPE OF WORK

This method statement is to define the method to be used to ensure that prefabricated ducting, bracketing, and in line equipment installation and final connections and workmanship are correct and acceptable, and conforming to the contract documents and General Specifications Material to be submitted for review by the Client- see latest Revision of the Material Procurement Schedule.

March 21st, 2014 Below are the steps or m ethod statem ent for installation & testing of SMATV System in a project.[...]

Sanitary Ware Installation Method Statement March 20th, 2014 Installation of sanitary ware can be done step wise as per m entioned procedure or m ethod statem ent b[...]

Plastering Works Method Statement March 20th, 2014 Below are the equipm ent involved in Plaster works that should be arranged before starting the plaste[...]

Method Statement for Internal Painting Works March 20th, 2014 Below is the procedure for doing the painting works for internal painting. This safe work m ethod sta[...]

Chiller installation method statement March 17th, 2014 Below is a standard operating procedure which can be used a a m ethod statem ent for installation of c[...]

How To Do Installation of Suspended False Ceilings March 14th, 2014

http://www.methodstatementhq.com/hvac-duct-work-installation-method-statement.html

1/4

9/7/2014

HVAC Duct Work Installation Method Statement Equipm ent Required For Installation of Suspended Ceilings Leveling Instrum ents Line dory C[...]

Transformer testing & commissioning method statement March 14th, 2014 Below is a standard m ethod statem ent which can be used as learning purpose and to prepare further pr[...]

METHOD STATEMENT FOR INSTALLATION, TESTING AND COMMISSIONING OF UPS March 14th, 2014 1.0. PURPOSE: The purpose of this m ethod statem ent defines the procedure to be followed for Insta[...]

3. RESPONSIBLE PERSONNEL Construction Manager Mechanical Superintendent.

CATEGORIES

Warehouse Controller Q.C. Engineer/Inspector

DOWNLOAD FULL METHOD STATEMENT IN WORD FORMAT

BMS Cem ent & Clinker Testing Civil Engineering Civil Method Statem ents Concrete Testing

4. METHOD – PRE-INSTALLATION

Construction Method Statem ents Drainage Pipes Installation

All materials drawings and other documentation relevant to a particular section of works will be

Duct Works

checked by the Construction Department prior to the commence of work ensuring that these

Electrical

are of the correct type as reviewed by the Client.

Electrical Method Statem ents

Before commencing any construction works, pre-inspections will be carried out on all materials

Fire Suppression System

prior to them leaving the storage area

Health & Safety

Prior to the commencement of any construction works, areas and access will be inspected by

HVAC Checklists

the Construction Team to ensure that they are in a suitable condition for construction works to

HVAC Maintenance

commence. The Client will be invited to attend this inspection at his discretion.

HVAC Method Statem ents

A close co-ordination with other trades will be carried out on site prior to commence work.

ISO 9001

A safe and protective storage area will be allocated on site, in close co-ordination with the employer. 5. METHOD OF INSTALLATION 1. Supervisor will instruct tradesmen regarding the execution of the works and will distribute all necessary approved construction drawings of the latest revision. 2. The supervisor will also check that tools and equipment available are in compliance with the contract requirements. 3. Ensure horizontal ductwork is adequately supported at equal distances in accordance with Construction Drawings with all brackets fixed to the vertical face of ribbed beams of the structure. 4. Care will be taken during setting out, that ductwork runs between ceiling module lines so as to maintain maximum flexibility for any future relocation of lighting fixtures or other services. 5. Ductwork supports unless otherwise indicated will be installed to provide a minimum space of 15mm between finished covering and adjacent work, and 100mm clearance from suspended ceiling. 6. Supports or hangers will be placed within 300mm of any 45° – 90° bend. 7. Screwed drop rods will have thread adjustment in either direction available after leveling of ductwork and associated plenum box’s. 8. Ducts will be supported within 300mm of mating flanges or joints. 9. As indicated on relevant approved construction drawings where more than one duct can be


Method Statem ent Tem plate Method Statem ents Piping Method Statem ents Piping Works Plum bing Method Statem ents Pressure Testing Project HSE Plan Pum p Installation Quality Assurance Quality Managem ent Risk Risk Assessm ent Risk Managem ent Sam ple Form s & Form ats Tem plates Testing & Com m issioning Water Supply Piping Welding Risk What Is Hazard? What Is Risk? Working At Height

2/4

9/7/2014


supported on one hanger – the size of the hanger will be assessed on the sum of the maximum

TAGS

widths. 10. Ductwork passing through non fire rated walls and floors will be adequately supported on either side.

Met hod St at ement ac duct inst allat ion AC

11. All locknuts are tightened correctly. At all open end’s check for debris then cover with suitable material to prevent any ingress of debris vermin, or moisture. 12. Supervisor to ensure that there are no dents, distortion or buckling of ducting during installation being aware that damaged sheet metal work will be rejected. 13. Supports are to be fixed at correct levels checking the bracket material is compatible with the installation and the correct method used for thermal insulation. 14. Ducting to be installed allowing sufficient space for expansion/contraction and thermal insulation. 15. Fixing of flanges to ductwork will be by the approved details and in compliance with the specification requirements: a) Clean both flange faces to be joined. b) Add gasket jointing material to flanges to be mated. c) Using only undamaged rust free bolts nuts and washers join mating flanges together and tighten bolts. d) Clean any excess jointing material from flanges. 16. Continuously check horizontal and vertical alignment of ductwork and compliance with contractors drawings and specification requirements by using spirit level plumb or other suitable instrument. 17. In line equipment is to be independently supported from main structure and not blockwork walls or sub-structure. 18. Silencers, fire dampers, balancing dampers & other plant items will be installed as per contractors drawings, and will be supported adequately. 19. Supervisor to check before end of work day’s by recording in his diary (as necessary) that: a) The correct type supports installed,

& Access Cont rol Syst em Accessories AC Duct ing

b)

Maintenance Acoust ic Lining blank performa blank proforma bms system BMS Testing Procedure Building Management System Building Management System BMS control

measures Electrical Method Statement for hazard hvac HVAC Method Statements inst allat ion Installation of GI Conduits & Accessories

method Method

Of Statement Method

Statement met hod st at ement for Inst allat ion Met hod St at ement Templat e MST MST For BMS

of pipe flushing pressure pumps risk Risk

Assessment safe work method sample check list sample checksheet Sample

statement

Format Electrical swms template test Testing & Commissioning Testing & Commissioning Method Statement water DOWNLOAD METHOD STATEMENTS

Supports are adequately supporting the ductwork and

associated plant equipment.

Download BMS Installation Method Statem ent

20. Test holes to be provided and plugged ready for commissioning and control equipment.

Download Chilled Water Pipes Installation &

21. Ensure terminal equipment is installed as specified.

Testing Method Statem ent

22. Supervisor to ensure that all completed installations look neat and tidy, and that there is

Download Method Statem ent For INSTALLATION

adequate spacing between ductwork and in line equipment allowing access for operation and

HYDRO TESTING & FLUSHING OF FIRE FIGHTING

ease of maintenance, to approved contractors drawings and manufacture’s recommendations.

PIPING SYSTEM INCLUDING SPRINKLERS

23. The supervisor in charge and the QC officer shall continuously monitor the activities (by recording

Download Method Statem ent For CENTRAL

the defects or snags into his House Process Inspection List) to ensure that all components

BATTERY SYSTEM INSTALLATION

indicated on the approved contractors drawings have been installed and that the installation is

Download Method Statem ent For Fire Alarm

in accordance with the contract requirements.

System Download Method Statem ent For Flushing Of Chilled Water Piping


Download Method Statem ent For Installation Of Packaged Units Download Method Statem ent For Installation Of Split Units & Risk Assessm ent

6. SAFETY AND ENVIRONMENTAL CONSIDERATION

Download Method Statem ent For Installation Of Transform ers

7. RECORDS

Download Project HSE Plan With All Form s

Ductwork check list. Hom e

8. REFERENCE DOCUMENTS

Privacy Policy Disclaim er

Particular Technical Specification Vol 2. Mechanical S.M.A.C.N.A .Specification for Ductwork Construction and Installation 1985 Painting & Identification See CONP-09-07

Hom e

For Second Fix Accessories, see separate Construction Quality Plan No. 07 ( i.e. For Grilles, Louvers

Privacy Policy

etc.)

Disclaim er


3/4

9/7/2014


See Construction Quality Plan On Site Ductwork Manufacture Contractors Drawings


LIKE US ON FACEBOOK J’aim e

Partager 30 personnes aiment ça. Soyez le premier de vos amis.

Filed under Duct Works, HVAC Met hod St at ement s | Tags: AC Duct ing Met hod St at ement , for, HVAC Duct Work Inst allat ion Met hod St at ement , HVAC Syst em Procedure, st at ement

« Method Statem ent For GI Box And GI/PVC Conduit Installation In The Wall Method Statem ent For HVAC Ductwork Insulation And Acoustic Lining »

Comments are closed.

Copyright © 2014 Met hod St at ement Free Download


|

zBorder Theme powered by WordPress

4/4

HVAC-Duct-Work-Installation-Method-Statement-pdf.pdf

Recommend Documents