HUAWEI Telecom Energy Solutions Catalog.pdf

Migrate Towards Simplicity

HUAWEI Telecom Energy Solutions

HUAWEI TECHNOLOGIES CO., CO ., LTD.

F

ull connected world cannot build without network, power supply become a key factor in network reliability. Along rapid development of telecommunication industry, site number tends to be explosive and the

growth rate of energy cost exceeds increase of income. Low energy efciency and weak expansion ability of traditional site hardly meets requirements of building a green broadband network and reducing operational cost. How to effectively deploy sites, elevate energy efciency and reduce carbon emissions while improving the power supply and environment assurance reliability, has become common challenges faced by enterprises and operators globally.

H

uawei, with extensive experiences in digital technology, network technology, M2M, software, big data, and power electronics, is promoting legacy telecom power onto a new level, where energy

can be accessed anytime, anywhere, energy utilization becomes simpler, energy management becomes smarter and energy facility is always ready to facilitate network evolution. MTS (Migrate Towards Simplicity) makes everything simple, ensures more efficient network and operation. Let's build a better connected world, together.

F

ull connected world cannot build without network, power supply become a key factor in network reliability. Along rapid development of telecommunication industry, site number tends to be explosive and the

growth rate of energy cost exceeds increase of income. Low energy efciency and weak expansion ability of traditional site hardly meets requirements of building a green broadband network and reducing operational cost. How to effectively deploy sites, elevate energy efciency and reduce carbon emissions while improving the power supply and environment assurance reliability, has become common challenges faced by enterprises and operators globally.

H

uawei, with extensive experiences in digital technology, network technology, M2M, software, big data, and power electronics, is promoting legacy telecom power onto a new level, where energy

can be accessed anytime, anywhere, energy utilization becomes simpler, energy management becomes smarter and energy facility is always ready to facilitate network evolution. MTS (Migrate Towards Simplicity) makes everything simple, ensures more efficient network and operation. Let's build a better connected world, together.

Contents • Large Capacity Power System 100A-24,000A/6kW-1,440kW

• Indoor Power System 100A-600A/6kW-36kW

• Outdoor Power System 100A-400A/6kW-24kW

• Wall-mounted Power System 30A-60A/1.74kW-3.2kW

• Embedded Power System 30A-400A/1.74kW-24kW

• Monitoring Modules SUM02B/ECC500

• Rectier Modules 15A-100A/870W-6,000W

• Advanced Energy Storage Modules ESM-A2400Wh(D)/ESM-A9600Wh(N)

Large capacity power (100A-24,000A)

Wall-mounted power (30A-60A)

Indoor power (100A-600A)

Outdoor power (100A-400A)

Embedded power (30A-400A)

• New Generation Outdoor Solution MTS9000A

• PowerCube 1000 - Solar Hybrid PowerCube S1/S2/S3

• PowerCube 1000 - Diesel Hybrid PowerCube D1-Standard/D1D1-Standard/D1-Advanced Advanced

• PowerCube 1000 - Grid Hybrid PowerCube G2/G3/G4/G4-Mini

• PowerCube 500 IVS Solution

• Energy OSS NetEco

MTS9000A

Grid Hybrid

6

Solar Hybrid

IVS Solution

Diesel Hybrid

NetEco

100A-24,000A/6kW-1,440kW Introduction Huawei new generation all-digital large capacity power systems include TP483000D, TP482000B and TP481200B. Adopting high power desity design and 1U 100A or 50A high efciency rectiers, single rectiifer cabinet can output maximum 3000A/180kw. The systems have tremendous features such as high reliability, high efficiency, high power density, high capacity, low noise and easy maintenance.

TP481200B TP482000B Integrated Type

TP483000D Distributed Type

Application Scenarios • • • • •

Wireless network central ofce Fixed network central ofce Large capacity convergence site Enterprise network central ofce Data center Legacy power

Reuse AC & DC distribution

Newly-built scenario

Reuse AC distribution

All swap

Legacy power system modernization

Features •

• •

•

•

Carrier class high reliability, system MTBF over 500,000 hours, passed over 1000 test items Green and energy saving, rectier efciency over 96% Compact design, single rectifier cabinet can output maximum 3000A/180kw,which is the highest in industry Huge system capacity, TP483000D can be expanded to 24,000A by parallel combination matching network evolution, while TP482000B expanded to 10000A and TP481200B expanded to 6000A Flexible remote monitoring mode, saving OPEX 1

Specications Integrated large power system Product style Dimension (W×D×H) System

DC Distribution

Rectier Module

TP482000B-N20C5

TP482000B-L20B5

600mm×600mm×2000mm

Cabling mode

Top inlet & outlet

Rated capacity

1200A(12×100A)

2000A(20×100A)

2000A(40×50A)

220/380VAC, three phase four/ve line (L1, L2, L3, PE or L1, L2, L3, N, PE)

120/208VAC, three phase four/ve line

Input voltage

260VAC-530VAC, rated: 380VAC


Input capacity

2×150A/3P (MCCB)

2×150A/3P (terminal)

2×230A/3P (terminal)

Battery branch

2×(1000A×2) (NT4)

2×(1000A×2) (NT4)

2×(1000A×2) (NT4)

Load branch

6×500A(NT3), 6×160A(NT00), 6×100A(NT00)

6×500A(NT3), 6×160A(NT00), 6×100A(NT00)

6×500A(NT3), 6×160A(NT00), 6×100A(NT00)

Input mode

Three phase, 260VAC-530VAC

120V or 240V dual live wire

100A/6000W

50A/3000W

Input mode AC Distribution

TP4812000B-N20C3

Rated capacity

Distributed large power system Product style Cabinet style

AC Distribution Cabinet

DC Distribution Cabinet

TPA38401B-N20B1

600mm×600mm×2000mm

Input mode

220/380VAC, three phase four/ve line (L1, L2, L3, PE or L1, L2, L3, N, PE)

Input voltage


Input capacity

1×630A/4P (two inputs/manual switchover)

1×400A/4P (two inputs/manual switchover)

AC output

6×160A/3P (MCCB) 1×63A/3P (MCB) 1×32A/3P (MCB) 3×32A/1P (MCB)

4×160A/3P (MCCB) 1×63A/3P (MCB) 1×32A/3P (MCB) 3×32A/1P (MCB)

Cabinet style

TPD48302B-N20B1

Dimensions

800mm(W)×600mm(D)×2000mm(H)

Output voltage

42-58VDC, default value: 53.5VDC

Maximum capacity

3000A/180kW 2×(1250A×2) (NT4)

Load branch

8×500A(NT3), 4×400A(NT2), 4×200A(NT1), 8×160A(NT00), 6×100A(NT00)

Cabinet style

TPR48302B-N20C3

Dimensions(W×D×H) Rated capacity

2

TPA38631B-N20B1

Dimension (W×D×H)

Battery branch

Rectier Cabinet

TP483000D

TPR48202B-N20C3

600mm×600mm×2000mm 3000A/180kW(30×100A/6kW)

2000A/120kW(20×100A/6kW)

100A-600A/6kW-36kW Introduction The indoor power systems include integrated power(built-in batteries) and detached power(separated batteries), whose output range varies from 100A to 600A. The series can accommodate high efciency rectier modules and have outstanding monitoring functions, and have been applied in multiple indoor scenarios.

Application Scenarios • • • •

Indoor site of access network Indoor site of convergence network Medium and small capacity central ofce Enterprise communication network

TP48300B/TP48600B Mini TP48300B Combined Type

supporting solar evolution Unied NetEco

Integrated Power Mini Power

Detached Power

supporting solar evolution

High temp. battery

Features •

•

• • •

•

• •

High rectifier efficiency (>98%) and non-derating below 55ºC help save energy Footprint saving, 50% footprint saved by integrated power, ‘0’ footprint for rack stack / wall-mounted of mini power Large housing ability, up to 8 BBUs accommodation Intelligent battery management prolongs battery lifespan Support in-band transmission networking, ‘0’ extra data collector and transmission link cost All-in-one controller, MIMO* energy scheduling mgmt., 5 AI, 9 DI, 8 DO Support solar access, saving grid expenditure High-temp. battery saves 70%-80% site A/C consumption

TP48200B/400B/600B Integrated Type

*MIMO: Multiple energy input, multiple mode output

3

Specications Integrated power system Product type Dimension (W×D×H)

TP48200B

TP48400B

TP48600B

600mm×600mm×2000mm

600mm×600mm×2000mm

600mm×600mm×2000mm

Rated capacity

200A

400A

600A

Battery space

16-32U(2-4×190Ah)

32U(4×190Ah)

24U(3×190Ah)

User space

0-16U

N/A

N/A

Input mode

220V single phase 380V three phase 110V dual-wire

220V three phase 380V three phase


LLVD: (MCB)5 branches BLVD: (MCB)6 branches


LLVD: (fuse)4 branches+(MCB)10 branches BLVD: (MCB)6 branches

Load branches

Combined power system Product type Dimension (W×D×H) Rated capacity

Installation mode

Input mode

Load branches

4

TP48300B

TP48600B

Mini TP48300B

600mm×400mm×1600mm

600mm×400mm×1600mm

442mm×360mm×480mm

300A

600A

300A

Antistatic oor/ ground installation

Antistatic oor/ ground installation

On the battery rack, 19/21/23 inches open rack, ground, DFMU cabinet, wall-mounted

220V single phase 380V three phase


220V single phase 380V three phase 110V dual-wire

LLVD: (fuse)7 branches+ (MCB)3 branches BLVD: (MCB)4 branches

LLVD: (fuse)5 branches+ (MCB)7 branches BLVD: (MCB)9 branches


100A-400A/6kW-24kW Introduction TP48200A(TP48400A) is an AC/DC outdoor power system that configures 48V/50A rectifier modules to supply rated of 200A(400A) output current, with various cooling system: heat exchanger(HEX), direct ventilation(DV) and TEC cooling. The power system has excellent performance such as wide range of AC input voltage, high power efciency, intelligent battery management and remote monitoring.

Application Scenarios • •

TP48200A/TP48400A Integrated Type

Outdoor carrier’s wireless site power scenarios Outdoor enterprise communication network power scenarios WIRE(2U) POWER (6U)

WIRE(2U)

R R U

……

R R U

POWER (6U)

TMC

WIRE(2U)

TMC

BBU(2U)

POWER (6U)

BBU(2U)

BBU(2U)

BBU(2U)

R R U

……

R R U

BBU(2U) BBU(2U) SPARE

SPARE

SPARE RFC

BATTERY

Typical outdoor DBS

BATTERY

Typical outdoor BTS

RFC BATTERY

Typical outdoor DBS+BTS

Features •

•

•

•

•

Cooling capacity up to 1500W, operation temperature can be -40ºC-45ºC, IP55 protect level, protect main equipment to be safe and reliable High power efficiency of rectifier >98%, intelligent rectifier dormancy, saving energy Support electronic labels, can be co-managed by HUAWEI main equipment OSS, saving management and maintenance cost Intelligent battery management and online test, prolonging battery lifespan Cooling system equipped in door, easy maintance

TP48200A Separated Type

TBC300A Separated Type

5

Specications Integrated cabinet steel series(1.5m Height) Product Type System capacity Dimension (W×D×H) Cooling

TP48200AHD15A6

TP48200AHD15A7

TP48200AHD15A8

TP48200AHD15A9

TP48200AHT15A5

TP48200AHT15A6

TP48200AHX15A1

200A 650mm×650mm×1500mm HEX(850W)+DV

HEX(850W )

HEX(850W)+TEC

Input mode

220V/380V

User space

9U

25U

16U(2×190Ah)

N/A

Battery space Heater

N/A

110V

220V/380V

500W

110V

N/A

220V/380V

500W

110V

220V/380V

Heat by TEC

N/A

Integrated cabinet steel series(0.9m Height) Product Type System capacity Dimension (W×D×H) Cooling

TP48120A-HD09A1

TP48120A-HD09A4

650mm×650mm×1500mm HEX(1500W) +DV

220V/380V

User space

8U

Heater

TP48120A-HD09A3

120A

Input mode Battery space

TP48120A-HD09A2

HEX(850W) +DV

110V

220V/380V

110V

8U(1×100Ah) 500W(Optional)

Separated power cabinet series Product Type System capacity Dimension (W×D×H) Cooling

TP48200A-HX09A5

TP48200A-HX09A6

TP48200A-HX09A7

200A 650mm×650mm×900mm HEX(850W)

Input mode

220V single phase/380V three phase

User space

11U

110V dual-live wire

N/A 15U

Separated battery cabinet series Product Type Dimension (W×D×H) Cooling Battery space Heater

6

TBC300A-DCA7

TBC300A-DCA6

TBC300A-TCA3

650mm×650mm×900mm DV

DV

TEC

Without heater

Heat by TEC

16U(2×190Ah) With heater (500W)

30A-60A/1.74kW-3.2kW Introduction TP4860C and TP4860H are 2 types of wall-mounted power system, which can convert from 220VAC single-phase or 110VAC dual-live wire input to stabilized -48V DC output. Its largest capacity is 60A. When congured with inverter, it can output -48VDC and 220VAC simultaneously . It can be built in 20Ah/40Ah VRLA battery. It provides great performance such as compact design, high efciency and exible power backup.

Application Scenarios • •

Wireless coverage sites power supply WLAN power supply

Remote power supply

TP4860H

Small site power supply

Features •

• •

• •

High rectier efciency over 96% helps to save energy, output without derated below 55ºC Support built-in inverter to output AC&DC simultaneously Support exible installation mode, such as wall mounted, pole mounted and grounding installation High protection level of IP55 Low noise and high environment adaptability

TP4860C

7

Specications Wall-mounted power system Type

TP4860H Dimension (W×D×H)

System

450mm×300mm×580mm

TP4860C 450mm (excluding 50mm protuberant part on the vent port)×300mm×630mm

Rated capacity

DC: 1740W / 2000W / 3200W, AC: 700W (1000VAC)

Cooling mode

Natural cooling

DV

Wall-mounted / oor-mounted

Wall-mounted / pole-mounted / oor-mounted

IP21

IP55

Installation mode Protection level AC input Inverter output (optional)

220VAC single phase or 110VAC dual-live wire 3 branches

AC Distribution AC SPD Signal port SPD Maximum output Battery branch

20kA/40kA, 8/20µs 3kA/5kA, 8/20µs 3200W 1 branch

DC Distribution BLVD DC SPD Rectier

Rated power Sensors interface Signal input

3 branches N/A

10kA / 20kA, 8/20µs

870W, 1000W or 1600W (optional) Battery temperature, door, battery mid-point voltage check 7 Digital input

Controller Alarm output

4 Dry contact output

Communication port

RS485 / RS232

Rated output

1000VA/700W

Inverter (optional) Working mode

Default by DC input priority

Rated capacity

20Ah/40Ah VRLA battery or 40Ah lithium battery

Normal voltage

12V

Battery (optional)

8

30A-400A/1.74kW-24kW Introduction This series of embedded power products includes 5 types of products: ETP4830, ETP4890, ETP48150, ETP48200 and ETP48400. They can provide wide range of DC output from 30A to 400A, and are very broad application in DC power system scenarios. The functional unit using a standardized installation structure design, power height ranging from 1U to 11U, compact design, support 19-inch rack or cabinet installation. The system can be adapted to a wide range of AC input voltage, with intelligent battery management, remote monitoring, etc.

ETP4830

ETP4890

Application Scenarios ETP48150 • • • •

Access network Transmission network Wireless base station Communication network of enterprise

ETP48200

Newly-built site

Legacy site modernization

Features •

• •

• •

• • • •

High rectier efciency over 98% helps to save energy, derated output above 55ºC Rectier with MTBF > 500,000h helps to save OPEX E-label function, can achieve assets management of the whole site, easy for assets management and location of problem quality Capacity covers 30A - 400A Smooth expansion of capacity from 200A to 400A and ACDB & DCDB Only 5U for 200A system, 12kW/U high power density Support 19/21 inch standard rack Standard FE, RS485/232 port , supporting 5 AI, 9 DI, 8 DO Support MIMO (solar access, 24V output, etc.) evolution

ETP48400

*MIMO: Multiple energy input, multiple mode output

9

Specications Small and medium capacity embedded power system Type

ETP4830 Dimension (W×D×H)

System

Installation mode Protection level Input mode

AC Distribution

SPD Maximum capacity DC Distribution

Battery breakers Load breakers Type Signal input

Controller

Alarm output Communication port

442mm×255mm×43.6mm (1U)

ETP4890 442mm×255mm×86.1mm (2U)

ETP48150 442mm×255mm×130.5mm (3U)

Installed on 19-inch rack or cabinet IP20 220VAC single phase or 110VAC dual-live wire

220/380VAC 3-phase or 220VAC single phase or 110VAC duallive wire

5kA/10kA, 8/20us 2kW

4.8kW

8kW

1 branch

1 branch

1 branch

2 branches

4 branches

8 branches

SMU01A

SMU01B

SMU01C

7 digital input, 2 analog input

2 digital input

8 dry contact output

4 dry contact output

RS232/485, FE

RS232/485

Large capacity embedded power system Type

System

ETP48200 Dimension (W×D×H)

482.6mm×330mm×222.5mm(5U)

Installation mode

Installed on 19-inch rack or cabinet

Protection level Input mode AC Distribution

220/380VAC 3-phase, 220VACsingle phase, or 110VAC dual-live wire

Output breakers

1 branch

2 branches

30kA/60kA, 8/20us

5kA/10kA, 8/20us

12kW

24kW

Battery breakers Load breakers SPD Signal input Alarm output Communication port

10

IP20

1 branch

Maximum capacity

Controller

442mm×330mm×489.5mm(11U)

Input breakers

SPD

DC Distribution

ETP48400

2 branches Maximum 10 branches

16 branches

10kA/20kA, 8/20us 6 digital input, 1 door magnetism, 1 water logging, 1 smoke, 2 temperature, 1 battery temperature, 1 environment temperature and humidity 8 dry contact output RS232/485, FE

SMU02B Introduction SMU02B is a type of high-end monitoring unit for site and power. It can monitor and manage telecom power system, and provides site monitoring function. LCD screen and keyboard are equipped in the unit to realize man-machine interaction. It has a serial communication port and an Ethernet port to realize local and remote monitoring. SMU02B supports the monitoring management of HUAWEI’s power system series, including embedded power, indoor power and outdoor power system.

SMU02B

Features •

• •

•

•

• •

• •

•

•

•

Performs comprehensive power management and intelligent battery management Grid quality detection Support time, voltage, capacity disconnecting protection and LLVD1, LLVD2, BLVD Supports north CAN and FE ports accessing and support SNMP protocol through FE interface Support local display and conguration by LCD screen or HTTPS browsing Supports electronic label function Support remote management and remote software upgrade from NetEco Supports downloading historical logs and statistics data Provides 5 analog inputs(AI), 12 dry contact outputs(DO) and 9 Boolean value inputs(DI) Provides multiple ports accessing, such as smoke sensor, door status sensor, water sensor, battery temperature sensor, ambient temperature and humidity sensor Supports multiple languages, such as English, Chinese, Turkish, Spanish, Portuguese and German Supports hot plug

11

ECC500 Introduction ECC500(Energy Control Center) is a central control unit of PowerCube system, which adopts advanced power conversion technology and intelligent management to maximize efficiency of energy utilization. It consists of main control module, basic I/ O module, expansion I/O module, GPRS module(optional), D.G. control module(optional) and one reserved slot.

ECC500

Features • •

•

•

•

•

• • •

•

• • •

12

Unied controller with comprehensive data acquisition function Supports multiple energy input and adopts advanced energy scheduling strategic to matching different hybrid power application scenario. Supports comprehensive management of power, energy storage system, environment and intelligent equipments. Support remote management and remote software upgrade from NetEco. Support local display and conguration by LCD screen or HTTPS browsing Support time, voltage, capacity disconnecting protection and LLVD1, LLVD2, BLVD Supports electronic label function Supports downloading historical logs and statistics data Provides multiple ports accessing, such as smoke sensor, door status sensor, water sensor, battery temperature sensor, ambient temperature and humidity sensor Supports multiple languages, such as English, Chinese, Turkish, Spanish, Portuguese and German Supports hot plug Support extended IO port Support GPRS communications with NetEco server

15A-100A/870W-6,000W Introduction R4815G

HUAWEI 1U height rectier module with high efciency and high power density can cover the output capacity from 15A to 100A or from 870W to 6000W. Rectier efciency is over 96%, and has tremendous features such as high reliability, high power density, soft start, excellent input and output protection, low noise and multimodule paralle.etc. HUAWEI rectier modules are widely applied in HUAWEI -48VDC power system such as embedded power, outdoor power, indoor power and large power system.

R4830G1

R4830G2

Features •

• • • •

Full series of high efficiency modules, applied in multiple scenarios Efciency over 96%, energy saving 1U height, high power density MTBF over 500,000hours, high reliability Excellent grid and environment adaptability

R4850G

R4850S

R48100G

Specications

Module style R4850S

Dimensions (H×W×D) 40.8mm×105mm×281mm

Efciency

Input voltage

Output power

98%

85-300VAC, 220V single phase or 110V dual live lines

3000W

R4815G1

870W 40.8mm×95.5mm×208mm

R4830G1 R4830G2

>96%

85-300VAC, 220V single phase or 110V dual live lines

1600W 2000W

40.8mm×105mm×281mm R4850G2 R48100G1

3000W 43mm×238mm×378mm

260-530VAC, three phase three line

6000W

13

ESM-A2400Wh(D), ESM-A9600Wh(N) Introduction HUAWEI advanced Energy Storage Modules(ESM) are a type of lithium iron phosphate battery integrated with management system. As an important module of PowerCube diesel hybrid solution and grid hybrid solution, ESM can be used in off grid and unstable grid areas. With fast charging adaptability and long lifespan, ESM can sharply reduce the D.G. running time and O&M cost comparing with traditional solutions.

ESM-A2400Wh(D)

Features High charge acceptance to ensure rapid and complete recharge Long shelf life up to 2 years at 35ºC due to low self-discharge Good performance at high temperature up to 55ºC Support parallel use and maximum capacity of 28.8kWh in parallel

• • • •

ESM-A9600Wh(N)

Specications ESM-A2400Wh(D) Nominal Voltage Operating Voltage Charging Voltage@ 25ºC Recommended Operating Temperature Self Discharge @ 25ºC Nominal Capacity

48V 47V-58V DC 56.4V 25ºC-35ºC Less than 5% after 90 days storage 2400Wh@ 5hr, 25ºC

9600Wh @ 5hr, 25ºC

Approx. 42.5kg

Approx. 125kg

50 A

100 A

ESM-A Dimension(WxDxH)

435mmx420mmx125 mm

440mmx500mmx500mm

ESMU Dimension(WxDxH)

444mmx310mmx44.5mm

Total Weight Maximum Charging Current Limited

14

ESM-A9600Wh(N)

MTS9000A Introduction Huawei new generation telecom power solution (MTS9000A) ensures carriers realize network easy deployment, site level saving, efcient O&M and smooth evolution for its easy, intelligent and high efciency performance. Huawei MTS system highly integrates power system, cooling system, site monitor system and housing system to provide safe and reliable environment for main equipment. MTS9000A solution could be widely used in outdoor sites. wireless coverage site Transmission node site • •

Solution Huawei new generation telecom power solution MTS9000A provides plentiful intelligent management functions to make telecom power system easy and high efciency.

MTS9000A SOH management MTS9000A provides SOH management based on monitoring battery cell SOH & SOC (Status of health, status of charge) in real time, to prolong battery serving life and avoid site power failure.

SOH

SOC

Access control management MTS9000A Intelligent access control management system makes the O&M easier and safer. The electrical lock on the cabinet is designed to be opened by: authorized card within valid period mobile APP with authorized username and password NetEco remotely • • •

Smart capture To reduce carrier investment loss due to illegal invasion, MTS9000A provide intelligent photograph capture function against illegal activities. The camera mounted on the top of inner cabinet will take a series of pictures automatically while invasion, and the pictures will be sent to OSS center(NetEco) immediately

15

Site energy efciency management Huawei MTS9000A solution provide energy information collecting sensors on site to measure energy input and output, the data will upload to NetEco server for SEE analysis. NetEco could show SEE status on multiple customized views.

Mobile APP management Mobile APP management is a new innovative OSS auxiliary function supported by MTS9000A, customer can not only maintain telecom site in mobile APP through OSS server, but also log on though WIFI module integrated in MTS9000A while arrived site. With the help of mobile APP, customer could realize network management at anywhere and anytime.

Benets • • • •

16

Easy land acquisition for its compact gure, knockdown type cabinet and Multiple energy input & output Intelligent O&M, Overall energy system and environment monitoring and convenient mobile app supported Easy Evolution, All modular design, easy expansion and upgrading High efciency, High efciency rectier and site & network level efciency management

Accessories Battery SOC & SOH management

Parameters

Item Dimension Installation Working Voltage Working Current Communication

iBox 110mm×142mm×10mm(L×W×H) Cabinet interior side wall 12V ± 2V Less than 100mA Northbound interface: Modbus Southbound interface: Zigbee

Camera

Parameters

Item Pixels Lens Output Format Night Vision Communication Working Voltage Working Current Working temperature

Camera 0.3 Million 6mm infrared JPEG Monochrome image, 6m distance RS485, Modbus, DC 9-15V Less than 100mA( night vision, less than 300mA) -20˚C to 70˚C

Intelligent Electronic Door Lock

Parameters

Item Working Voltage Working Current Unlock Record IP level

eLock 12V ± 20% Less than 60mA Magnetic card, Live APP, OSS, LUI on site Unlock time and authorization number Closed status: IP55

AC Meter

Parameters

Item Working Voltage Working Current Detecting Voltage Range Detecting Current Range AC PUE Measurement Precession

AC Meter 36 to 72 VDC Less than 100mA 90 to 300VAC 0 to 75A ±1%

EFUSE

Parameters

Item Dimension Distribution SPD Working Voltage Maximum Current

EFUSE 442mm×42mm×300mm(W×H×D) 10 Routes, up to 20A/route (5,10,15,20A congurable) Differ mode: 10kA, ComVmon mode: 20kA; 8/20µs 40 to 60VDC 100A

17

Specications

Product Model Base Dimension (W x D)

2.0m

Application mode

Equipment cabinet Battery cabinet Integrated cabinet

Integrated telecom energy solution

Maintenance

Front operation & maintenance Sandwich panel

Protection level

18

IP55 for Aircon and HEX, IP45 for DV N/A

ETP48200-C5B4/ C4

ETP48200-C5B5/ C3

ETP48200-C5C5

ETP48300-C6A1

Capacity

N/A

200A

200A

200A

300A

110V dual live

220/380V

220/380V

MCB:1×100A/2P

N/A

Input voltage

N/A

220/380V

Input frequency

N/A

45Hz to 66Hz

AC input

N/A

MCB:1×63A/3P

AC input SPD

N/A

30kA/60kA (8/20µs)

Dimension

N/A

5U

Rectier capacity

N/A

3000W

Rectier efciency

N/A

>96%

N/A

LLVD: 2×80A/1P, 3×32A/1P BLVD: 1×63A/1P, 3×32A/1P, 1×16A/1P Battery breaker: 2×125A/1P

N/A

• Battery SOH management • Access control management • Smart capture • Mobile APP management Site energy efciency management (unavailable for ETP48300-C6A1) • (Above features are unavailable for ETP48200-C5B4/B5)

Optional Features

Operation temperature

-40˚C to +50˚C

Storage & transportation temperature

-40˚C to +70˚C

Humidity Battery (optional)

2/3/4 Layers

Power Model

DC distribution

Environment

2.0m

HEX (Only for equipment cabinet and integrated cabinet) DV/TEC (Only for battery cabinet) DC/AC Aircon

Panel material Battery shelf

MTS9513A

815mmx735mm 1.4m, 2.0m, 2.3m

Cooling mode

Advanced Features

MTS9512A

Height

Cabinet

Embedded Power

MTS9510A (Mini-shelter)

Specication Capacity

N/A 6U



-40˚C to +55˚C


-40˚C to +45˚C

5% to 95% 12V/2V

12V

12V

12V

12V

Max. 4x190Ah

Max. 3x190Ah

Max. 2x190Ah

Max. 2x190Ah

Max. 2x190Ah

PowerCube S1: Pure Solar Solution Introduction Pure solar hybrid solution is currently the most favored choice for green power solutions in many regions for low and medium load sites.

Scenarios • •

Mountainous areas and isolated islands where the topography is complicated and transportation is inconvenient Scenic spots which require environment protection. High Efciency PV Module: 15%

United Controller with Advanced SolarMax Technology

High-temperature Tolerant Solar Cycle Battery

High Precision MPPT: Upto 99.8%

Benets • • •

‘Zero’ OPEX, ‘Zero’ CO 2 emission More PV panels saving with advanced SolarMax MPPT(Maximum Power Point Tracking) tech. Multi-anti-theft design to protect assets

19

Conguration

Solution 1 (Outdoor)

Typical Power Load



Solution 4 (Indoor)

<0.8kW

< 3kW

MPPT(Maximum Power Point Tracking) box

ECC500(Energy Control Center) with MPPT(Maximum Power Point Tracking) module

Installation Type

Pole-mounted

Ground-mounted

Capacity of SSU

N/A

Max. 8x50A SSU

Capacity of PV Module

Max. 3,000Wp

Max. 24,000Wp

BLVD

1x32A, 2x10A

2x80A, 2x63A

LLVD

N/A

4x32A, 2x16A, 1x10A

Natural cooling

HEX

Controller

Cooling for Equipment

EcoCool / Split DC Aircon Cooling for Battery Cabinet Remaining Space Battery Model and Capacity

Key Technology

20

Natural cooling

Natural cooling

ICC100

ICC350

ICC310

ICC200

N/A

7U

26U

31U

TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups) SCB-A (Solar Cycle Battery): 200/300/500/600/800Ah (Max. 4 groups) SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efciency of 98.50%, high temperature adaptability and high sensation of light.

PowerCube S2: Solar & Diesel Solution Introduction Solar & D.G. hybrid solution is applicable for modernization of legacy diesel powered sites with medium and high load in outlying areas.

Scenarios • • •

Areas where sunshine duration uctuates greatly in each month Modernization of legacy D.G. powered sites with limited footprint Systems requiring high reliability requirements High Pillar Structure & Anti-theft Bolts


IDG: Integrated Diesel Generator

High Efciency Rectier: Upto 96%


High reliability Maximum usage of solar energy with leading algorithm design Excellent TCO performance with optimized PV & IDG combination

21

Conguration


Typical Power Load Controller Installation Type Distribution Capacity Capacity of PV Module

<3.5kW ECC500(Energy Control Center) Ground-mounted Max. 8x50A (SSU+PSU) Max. 24,000Wp

BLVD

2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A

Integrated Diesel Generator Capacity Cooling for Equipment

Solution 2(Indoor)

10/14kW with 3W+N; 11.5/16kW with dual-live wire or reuse

HEX EcoCool / Split DC aircon

Cooling for Battery Cabinet Remaining Space

Battery Model and Capacity

Key Technology

22

Natural cooling ICC350

ICC310

ICC200

7U

26U

31U

TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups) DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups) DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups) SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efciency of 98.50%, high temperature adaptability & high sensation of light.

PowerCube S3: Solar & Grid (Diesel) Introduction Solar & Grid hybrid solution is applicable for medium and high load sites with grid connection.

Scenarios • •

Areas having unstable grid, Solar energy acts a complement to the unstable grid Scenarios where Mains supply needs to blend with sustainable energy solution to cut down emission


Carrier Class Reliability, Complete SPD Design


High reliability Solar energy is priority Low TCO, less maintenance costs

23

Conguration


Typical Power Load Controller Distribution Capacity Capacity of PV Module

<3.5kW ECC500(Energy Control Center) Max. 8x50A (SSU+PSU) Max. 12,000Wp

BLVD

2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A

AC Input Integrated Diesel Generator Capacity Cooling for Equipment

Solution 2 (Indoor)

220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire

10/14kW with 3W+N; 11.5/16kW with dual-live wire

HEX EcoCool / Split DC Aircon

Cooling for Battery Cabinet Remaining Space


Key Technology

24

Natural cooling ICC310

ICC200

26U

31U

TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 4 groups) DCB-A (Deep Cycle Battery): 300/420/490/600/800Ah (Max. 4 groups) DCB-B (Deep Cycle Battery): 200/300/500/650/800Ah (Max. 4 groups) SolarMax technology includes features such as high precision MPPT(Maximum Power Point Tracking) of upto 99.8%, high conversion efciency of 98.50%, high temperature adaptability & high sensation of light.

PowerCube D1-Standard & D1-Advanced

Introduction Diesel hybrid solution is suitable for medium and high load sites with high reliability requirement.

Scenarios • • •

Modernization of legacy D.G. powered sites with low load rate Areas where Diesel-powered site OPEX is comparatively less than that of the Solar site Areas lacking professional D.G. maintenance engineers

Integrated Diesel Generator United Controller with Advanced DieselMax Technology

Fuel Level Sensor

5 Levels of Anti-theft Structure Design

Deep Cycle Battery


Up to 75% fuel saving and 90% D.G. running time saving Up to 97.5% D.G. maintenance cost saving Smooth evolution to Solar Hybrid Solution

25

Conguration

D1-Standard (Outdoor)

Typical Power Load Controller

System Capacity

D1-Standard (Indoor)

D1-Advanced (Outdoor)

D1-Advanced (Indoor)

<5kW ECC500(Energy Control Center) Max. 6x50A PSU(Standard) Max. 8x50A PSU(Co-site)

Max. 8x50A PSU

Max. 6x50A PSU

Max. 8x50A PSU

Integrated Diesel Generator Capacity

10/14kW with 3W+N; 11.5/16kW with dual-live wire(standard/advanced), 10/14kW with 3W+N;(Co-site)

Integrated Fuel Tank Capacity

800L

BLVD

2x80A, 2x63A(standard/advanced), 1x63A/tenant, total for 4 tenants(Co-site)

LLVD

4x32A, 2x16A, 1x10A(standard/advanced), 1x63A,2x80A/tenant, total for 4 tenants(Co-site)

AC Input Cooling for Equipment

220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire HEX


Cooling for Battery

DC Aircon / Free cooling

Cabinet

ICC500

ICC 900

ICC200

ICC500

Remaining Space

12-14U

19-29U

31U

14U


Key Technology

26


EcoCool / Split DC Aircon

TCB-A (Temperature Cycle Battery): 300/400/500/650/800Ah (Max. 2 groups) DCB-A (Deep Cycle Battery): 300/420/490/600Ah (Max. 2 groups) DCB-B (Deep Cycle Battery): 200/300/500/650Ah (Max. 2 groups)

ICC900

ICC200 31U

For ICC500, ESU-A (Advanced Energy Storage Unit), Max. 2x200Ah For ICC900, ESU-A (Advanced Energy Storage Unit), Max. 3x200Ah + 2x150Ah backup batteries(optional)

DieselMax Technology includes features such as dynamic load algorithm, high AC to DC conversion efciency of 96% and high charging/discharging efciency of 96%

PowerCube G2: Advanced Fast Charging Solution Introduction Advanced fast charging system is feasible when electricity grid is unreliable and outage time is short but frequent.

Scenarios • •

Modernization of Grid plus backup D.G. powered sites Areas lacking professional D.G. maintenance engineers

United Controller with Advanced GridMax Technology

Advanced Energy Storage Unit


Fast charging: Full charging < 2hrs Energy storage: 4-5 years lifespan ‘Zero’ D.G. running time or removing D.G. Smooth evolution to Solar Hybrid Solution

27

Conguration

G2 (Outdoor) Typical Power Load

G2 (Indoor)

<5kW

Controller

ECC500(Energy Control Center)

AC Input

220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire

System Capacity Cooling for Equipment

Max. 6x50A PSU

Max. 8x50A PSU


Cooling for Battery BLVD

2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A

Cabinet Remaining Space


Key Technology

28

DC Aircon

ICC500

ICC900

ICC200

14U

14U

31U

ESU-A (Advanced Storage Energy Unit): 200Ah (Max. 2 groups)



GridMax Technology includes features such as fast charging, step charging and high adaptability

PowerCube G3: Enhanced Fast Charging Solution Introduction Enhanced fast charging system is used for areas where electricity grid not only faces often short outages but also seldom abnormal long outages.

Scenarios • •

Modernization of Grid plus backup D.G. powered sites Areas lacking professional D.G. maintenance engineers

United Controller with Advanced GridMax technology, Unique Control Algorithm of Hybrid Energy Storage

Hybrid Energy Storage



29

Conguration

G3 (Outdoor) Typical Power Load Controller System Capacity AC Input Cooling for Equipment

G3 (Indoor)

<5kW ECC500(Energy Control Center) Max. 6x50A PSU

Max. 8x50A PSU

220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire HEX EcoCool / Split DC Aircon


2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A



Key Technology

30

DC Aircon

ICC500

ICC900

ICC200

14U

9U

28U

ESU-A (Advanced Storage Energy Unit): 50Ah. FCB-A (Fast Charging Battery): 200/300/400/500/650Ah Max. 2x50Ah ESU-A + 1x400Ah FCB-A

Max. 3x50Ah ESU-A + 1x650Ah FCB-A

GridMax Technology includes features such as fast charging, step charging and high adaptability.

Max. 3x50Ah ESU-A + 1x650Ah FCB-A

PowerCube G4: Standard Fast Charging Solution Introduction Standard fast charging system is suitable for areas where electricity grid has seldom daily outages.

Scenarios • •

Modernization of Grid plus backup batteries powered sites New-building sites in unstable grid areas

Split DC Aircon

United Controller with Advanced GridMax Technology

Fast Charging Battery



31

Conguration

G4 (Outdoor) Typical Power Load Controller System Capacity AC Input Cooling for Equipment

G4 (Indoor)


Max. 8x50A PSU

220VAC (85-300VAC) , 50/60Hz (45-66Hz) , 3-phase & 4-wire HEX EcoCool / Split DC Aircon


2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A



Key Technology

32


ICC500

ICC900

ICC200

12U

27U

31U

FCB-A (Fast Charging Battery): 200/300/400/500/650Ah Max. 1x650Ah FCB-A

Max. 2x650Ah FCB-A

Max. 1x650Ah FCB-A

GridMax Technology includes features such as fast charging, step charging and high adaptability.

PowerCube G4 Mini: Mini Standard Fast Charging Solution Introduction Mini-Standard fast charging system is suitable for areas where the electricity grid suffers from weekly multiple longtime outages.

Scenarios • •


United Controller with Advanced GridMax technology

Fast Charging Battery (12V per cell)



33

Conguration

G4 Mini (Outdoor) Typical Power Load Controller System Capacity AC Input Cooling for Equipment

G4 Mini (Indoor)


Max. 8x50A PSU

220VAC (85-300VAC), 50/60Hz (45-66Hz), 3-phase & 4-wire HEX EcoCool / Split DC Aircon


2x80A, 2x63A

LLVD

4x32A, 2x16A, 1x10A

Cabinet Remaining Space Battery Model and Capacity Key Technology

34

Free Cooling

ICC330

ICC200

8U

31U

FCB-B (Fast Charging Battery): Max. 2x150Ah

FCB-B (Fast Charging Battery): Max. 4x150Ah

GridMax Technology includes features such as fast charging, step charging and high adaptability

PowerCube500: IVS Solution Introduction Intelligent video surveillance demands grow rapidly. HUAWEI IVS solution can be applied in various scenarios from good grid, poor grid to off grid. •

•

National security infrastructure demands in terms of border monitoring, fortress spot protecting and website facility management will adopt the IVS system, which sites grid are unavailable. As energy saving and environment friendly demands, in densely populated areas will adopt the IVS system, especially in city, road, square, scenic spot etc.

Scenarios • •


Solar Panel Camera

Camera

Integrated cabinet, including battery,

Integrated cabinet,

power converter, etc.

including battery, power converter, etc.

Grid hybrid IVS solution

Solar hybrid IVS solution


Higher efciency, energy saving, green & environment friendly Simplied conguration Easy deployment and footprint saving, pole-mounted or ground installation supported Anti-theft design and assets protected

35

Conguration

Typical Power Load

Solution 2

Solution 3

Solution 4

None Backup Time

Short Backup Time

Long Backup Time

Off Grid

<300 W

<150 W

<150 W

<80 W

Grid

Grid + Battery

Grid + Battery

Solar + Battery

Autonomy Time

0 Hours

2 Hours

12 Hours

72 Hours

Installation Mode (Cabinet)

Pole Mounted

Pole Mounted

Pole Mounted /Ground Installation

Power Supply Source

Height of Pole Maximum PV Capacity Input AC Voltage

SPD

36

Solution 1

Pole Mounted /Ground Installation

Typical 6m N/A

800Wp

110/220 V

N/A

AC port: 5kA/10kA, FE port: nominal 2kA/6kV

Output Voltage

DC12V Optional (DC48V PoE, AC 24V, AC 220V)

Protection Level

IP55

iManager NetEco (Site) Introduction Network Availability = Communication Availability * Transmission Availability * Energy Availability Site will be out-of-service during energy interruption. Well managed perfect communication equipment and well managed perfect transmission equipment together with perfect energy system are not necessarily bring high network availability and satised revenue, unless energy system is simultaneously well managed.

Conventional inefcient manpower-based O&M mode can not meet in depth needs of increasing network scale and diversied types of energy supply and consumption. Facing cutthroat competition, we never must be considered as they are now of meticulous management for electricity, fuel, efciency and asset, to improve protability by cutting OPEX.

Scenarios NetEco is innovated to adapt to these strategies, it is a centralized remote OSS solution for site energy equipment. The following diagram indicates the unique features and customer values of NetEco solution. Flexible Server Options: Small-scale (<=1000 Sites)

NetEco

Medium-scale (<=2000 Sites)

Mobile APP

Large-scale (<=5000 Sites)

Northbound

3rd Party System

Networking

Transmission-Saving In-band networking solution

In-band Green Channel

Flexible and Stable

OR

Out-of-band GPRS/IP/E1

Out-of-band networking solution

Adaptable to diversified scenarios

Hybrid Power Systems Grid Hybrid

Site Power Systems Indoor Power

Diesel Hybrid Solar Hybrid

Outdoor Power

Embedded Power

Saving Site data acquisition devices-free

Benets •

•

•

Better back high efcient O&M, makes O&M visible, controllable and manageable; realize automation and information, reduce manpower site visit; assists preventative maintenance, provides prediction and expert suggestion. Improves power availability, ensures smooth communication, improves QoS and QoE; drives revenue and subscribers increasing. Makes site energy saving manageable, controllable and measureable; supports PUE analysis and optimization.

37

Conguration Items

Specications and/or Features Small scale

Medium scale

Large scale

1,000 sites per server



System Capacity

In-band transmission

Out-of-band transmission

For some Huawei 3900 G/U/L serials macro sites

IP, GPRS, E1, etc.

Networking mode

Integration with 3rd party

Alarm SNMP northbound interface: supports SNMP v1, SNMP v2c, and SNMP v3; Performance SNMP northbound interface, based on SNMPv3

Platform function

Supports management of multiple time zones, data backup and restore, online help

Real-time monitoring

GIS site Map (based on Google Map), real-time monitoring, GUI, power supply logics, customized real-time counter subscription and my workspace

Alarm management

Alarm collection and storage, alarm browse, alarm notication, alarm processing, alarm setting, dry contact alarm management, alarm masking and alarm thresholds setting

Conguration Mgmt.

Site controller discovery, graphical drag and drop site conguration, batch sites copy and batch parameters modication, site parameter setting by SMS; conguration data export to EXCEL

Performance and Report

Security management

Asset management

Value-added features

Historical data collection, query, statistical analysis, report management; customized report, automatic periodic report

Network security management, role and operation authority management, user and password management, operation authentication, log management, ECC500-based video capture Inventory data management, asset anti-theft Overall network battery management, overall network diesel generator and fuel management, site DC power sharing, Diesel Max II efciency optimization

Preventative maintenance

Early-warning: reduces the probability of power failure Maintenance reminder: D.G. refueling, defected battery changing, etc.

Prospective Prediction

Operating time prediction: D.G. fuel capacity, battery backup time, etc. Lifespan prediction: Battery remain capacity, discharge times, etc.

Remarks: Features are constrained to the conguration of site hardware and controller software, as well as NetEco versions.

38

Migrate Towards Simplicity

HUAWEI Telecom Energy Solutions Catalog.pdf

Recommend Documents