hss9860-v900r008-hlr-subscriber-data-in-huawei-standard-format.pdf

[ 键入文字 ]

HLR Subscriber Data in Huawei Standard Format

INTERNAL

Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

错误！未知的文档属性名称

2014-12-11

Page 1, total 68 pages

[ 键入文字 ]


INTERNAL

HLR Subscriber Data in Huawei Standard Format 1 Basic Subscription 1.1HLR_INDEX 1.1 HLR_INDEX Format: HLR_INDEX= Description: a string, with wit h a single value. Value Value range: 0 255. 255. –

1.2IMSI 1.2 IMSI Format: IMSI= Description: a string which contains 5 to 16 digits, in a format similar to TBCD format.

1.3MSISDN 1.3 MSISDN Format: MSISDN= Description: a string which contains up to 16 digits, in a format similar to TBCD format.

1.4SID 1.4 SID Format: SID= Description: a string which contains 16 hexadecimal digits.

1.5IMEISV 1.5 IMEISV (Dynamic) Format: IMEISV= Description: a string which contains up to 16 digits, in a format similar to TBCD format.

1.6CCNDC 1.6 CCNDC Format: CCNDC= Description: a string of 3 to 5 digits. If MSISDN contains the string, the parameter can be omitted.


2014-12-11


[ 键入文字 ]


INTERNAL

HLR Subscriber Data in Huawei Standard Format 1 Basic Subscription 1.1HLR_INDEX 1.1 HLR_INDEX Format: HLR_INDEX= Description: a string, with wit h a single value. Value Value range: 0 255. 255. –

1.2IMSI 1.2 IMSI Format: IMSI= Description: a string which contains 5 to 16 digits, in a format similar to TBCD format.

1.3MSISDN 1.3 MSISDN Format: MSISDN= Description: a string which contains up to 16 digits, in a format similar to TBCD format.

1.4SID 1.4 SID Format: SID= Description: a string which contains 16 hexadecimal digits.

1.5IMEISV 1.5 IMEISV (Dynamic) Format: IMEISV= Description: a string which contains up to 16 digits, in a format similar to TBCD format.

1.6CCNDC 1.6 CCNDC Format: CCNDC= Description: a string of 3 to 5 digits. If MSISDN contains the string, the parameter can be omitted.


2014-12-11


[ 键入文字 ]


INTERNAL

1.7CURRENTNAM 1.7 CURRENTNAM Format: CURRENTNAM= Description: Network access mode of the user, a string, with a single value. Value Value range: BOTH

/*both MSC and SGSN*/

NONGPRS

/*only MSC*/

GPRS

/*only SGSN*/

1.8CAT 1.8 CAT Format: CAT= Description: a string, with a single s ingle value. Value Value range: UNKNOWN /*unidentified type*/ FRENCH

/*sort by user language*/

ENGLISH GERMAN RUSSIAN SPANISH SPECIAL1 SPECIAL2 SPECIAL3 RESERVE COMMON

/*common user*/

SUPERIOR

/*super user*/

DAT DATACALL /*data call*/ TESTCALL

/*test call*/

SPARE PAYPHONE COIN;

1.9LOCK 1.9 LOCK Format: LOCK= Description: a string, with multiple values. Value Value range: LOCKIN: Barring incoming calls of the user LOCKOUT: LOCKOUT: Barring outgoing calls of the user SABOUT: SABOUT: The user applies for barring outgoing calls actively 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format SABIN: The user applies for barring incoming calls actively

INTERNAL

SGSNLOCK: User PS domain barring (restricting user PS domain roaming) EPSLOCK: User EPS domain barring (restricting user EPS domain roaming) NON3GPPLOCK: User Non-3GPP domain barring (restricting user Non-3GPP domain roaming)

1.10 UPLCSLCK Format: UPLCSLCK= Description: a string, with a single value. Value: YES: Deny location updates for CS domain NO: Allow location updates for CS domain

1.11 UPLPSLCK Format: UPLPSLCK= Description: a string, with a single value. Value: YES: Deny location updates for PS domain NO: Allow location updates for PS domain

1.12 TBS Format: TBS= Description: Basic service (including telecom services and bearer services) string, with multiple values. Value range: /*telecom service*/ TS11: telephony TS12: emergencyCalls TS21: shortMessageMT_PP TS22: shortMessageMO_PP TS61: facsimileGroup3AndAlterSpeech TS62: automaticFacsimileGroup3 TS63: facsimileGroup4 ALLPLMNTS: allPLMN_SpecificTS PLMNTS1: plmn_specficTS_1 PLMNTS2: plmn_specficTS_2 PLMNTS3: plmn_specficTS_3 PLMNTS4: plmn_specficTS_4 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format PLMNTS5: plmn_specficTS_5

INTERNAL

PLMNTS6: plmn_specficTS_6 PLMNTS7: plmn_specficTS_7 PLMNTS8: plmn_specficTS_8 PLMNTS9: plmn_specficTS_9 PLMNTSA: plmn_specficTS_A PLMNTSB: plmn_specficTS_B PLMNTSC: plmn_specficTS_C PLMNTSD: plmn_specficTS_D PLMNTSE: plmn_specficTS_E PLMNTSF: plmn_specficTS_F /* bearer service*/ BS21: dataCDA_300bps BS22: dataCDA_1200bps BS23: dataCDA_1200_75bps BS24: dataCDA_2400bps BS25: dataCDA_4800bps BS26: dataCDA_9600bps BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE BS2G: general_dataCDA BS31: dataCDS_1200bps BS32: dataCDS_2400bps BS33: dataCDS_4800bps BS34: dataCDS_9600bps BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE BS3G: general_dataCDS BS40: allPadAccessCA_Services BS41: padAccessCA_300bps BS42: padAccessCA_1200bps BS43: padAccessCA_1200_75bps BS44: padAccessCA_2400bps 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

BS45: padAccessCA_4800bps BS46: padAccessCA_9600bps BS50: allDataPDS_Services BS51: dataPDS_2400bps BS52: dataPDS_4800bps BS53: dataPDS_4800bps BS61: allAlternateSpeech_DataCDA BS62: allAlternateSpeech_DataCDS BS81: allSpeechFollowedByDataCDA BS82: allSpeechFollowedByDataCDS

1.13 ODBIC Format: ODBIC= Description: Incoming call barring decided by the operator, a string, with a single value. Value range: BAIC: barring of all incoming call BICROAM: barring of incoming calls when roaming outside home PLMN country NONE: (default) no barring

1.14 ODBOC Format: ODBOC= Description: Outgoing call barring decided by the operator, a string, with a single value. Value range: BAOC: barring of all outgoing calls BOIC: barring of outgoing international calls BOICEXHC: barring of outgoing international call s except those direct to the home PLMN BOCROAM: OdbOutgoingCallsWhenRoaming NONE: (default) no barring

1.15 ODBROAM Format: ODBROAM= Description: Roaming barring service decided by the operator, a string, with a single value. Value range: ODBOH: baring of roaming when the user roams outside the home P LMN


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL ODBOHC: barring of roaming when the user roams outside the home PLMN country BROHPLMNCGPRS: baring of GPRS when the user roams outside the home PLMN country NONE: (default) no barring

1.16 ODBPRC Format: ODBPRC= Description: barring high-rate entertainment and information calls decided by the operator, in a single column, with multiple values. Value range: ENTER: barring of entertainment calls INFO: barring of information calls NONE: (default) no barring

1.17 ODBPLMN Format: ODBPLMN= Description: a string, in a single column, with multiple values. Value range: PLMN1, PLMN2, PLMN3, PLMN4, NONE (default).

1.18 ODBPOS Format: ODBPOS=- Description: a string, with a single value, multiple columns, with multiple values. Value range: Column 1: value range: NOBPOS, BAPOS, BHPLMNAPROAM, BALLAPROAM; Column 2: value range: BOTH, MS, NET

1.19 OBRF Format: OBRF= Description: a string, with a single value. Value range: OBRFALL, OBRFIN, OBRFINEXH, OBRFZ, OBRFZEXH

1.20 ODBECT Format: ODBECT= Description: a string, with a single value. Value range: ODBAECT: OdbAllECT ODBCECT: OdbChargeableECT ODBIECT: OdbInternationalECT


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format ODBZECT: OdbInterzonalECT

INTERNAL

1.21 ODBDECT Format: ODBDECT= Description: a string, with a single value. Value: YES, NO

1.22 ODBMECT Format: ODBMECT= Description: a string, with a single value. Value: YES, NO

1.23 ODBPREMSMS Format: ODBPREMSMS= Description: whether to bar the PREMSMS, Value: YES, NO

1.24 ODBADULTSMS Format: ODBADULTSMS= Description: whether to bar the ADULSMS, Value: YES, NO

1.25 SUBRES Format: SUBRES= Description: Restriction type, a string, with a single value. Value range: ALLPLMN: All_GSM_PLMNS ONEAFPLMN: OneNationalAndAllForeign_GSM_PLMNS HPLMN: RegionallyRestricted RRTEMPLATE: Regional Roaming from RRTPL Default value: ONEAFPLMN

1.26 VLRLIST Format: VLRLIST= Description: A numerical string, with a single value, representing VLR roaming restriction template

1.27 SGSNLIST Format: SGSNLIST= Description: A numerical string, with a single value, representing SGSN roaming restriction template

1.28 VLR (Dynamic) Format: VLR= 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: VLR number where the user is roaming, a numerical string consisting of 1 15 digits, with a single value –

1.29 MSC (Dynamic) Format: MSC= Description: MSC number where the user is roaming, a numerical string consisting of 1 15 digits, with a single value –

1.30 SGSN (Dynamic) Format: SGSN= Description: SGSN number where the user is roaming, a numerical string consisting of 1 15 digits, with a single value. –

1.31 MTRF (Dynamic) Format: MTRF= Description: whether to support the MTRF, Value: YES, NO

1.32 IMSSF_NUM (Dynamic) Format: IMSSF_NUM= Description: GT address of IMSSF, a numerical string consisting of 1 15 digits, with a single value –

1.33 VOLTESTATE (Dynamic) Format: VOLTESTATE=--- Description: with a single value, multiple columns Column 1: MME capability, value: 1: Yes 0: No Column 2: S4SGSN capability, value: 1: Yes 0: No Column 3: RVCC capability, value: 1: Yes 0: No Column 4: IMS registration, value: 1: Yes 0: No


2014-12-11


[键入文字 ]


INTERNAL

1.34 IP_SM_GW_ADD (Dynamic) Format: IP_SM_GW_ADD= Description: IP-SM-GW address, a numerical string consisting of 1 15 digits, with a single value. –

1.35 UNRI (Dynamic) Format: UNRI= Description: UE not reachable for IP. Value: YES, NO

1.36 UNRR (Dynamic) Format: UNRR= Description: Reason why UE is not reachable for IP. Value range: 1 12 and 100 –

0: no_paging_response_via_the_MSC 1: IMSI_detached 2: roaming_restriction 3: deregistered_in_the_HLR_for_non_GPRS 4: MS_purged_for_non_GPRS 5: no_paging_response_via_the_SGSN 6: GPRS_detached 7: deregistered_in_the_HLR_for_GPRS 8: MS_purged_for_GPRS 9: Unidentified_subscriber_via_the_MSC 10: Unidentified_subscriber_via_the_SGSN 11: deregistered_in_the_HSS_HLR_for_IMS 12: no_response_via_the_IP_SM_GW 100: invalid

1.37 URRP_MME (Dynamic) Format: URRP_MME= Description: Whether the UE is reachable for IP on the MME. Value range: REACHABLE, NOT_REACHABLE

1.38 URRP_SGSN (Dynamic) Format: URRP_SGSN=


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: Whether the UE is reachable for IP on the SGSN. Value range: REACHABLE, NOT_REACHABLE

1.39 ODBSS Format: ODBSS= Description: Barring of supplementary services decided by the operator, a string, with a single value. Value: YES: barring of the supplementary service of the user NO: no barring

1.40 SMDP Format: SMDP= Description: short message deliver path, a string, with a single value. Value: MSC: transfer short messages from the MSC preferentially SGSN: transfer short messages from the SGSN preferentially

1.41 NAEA Format: NAEA= Description: access code of equal access, a string consisting of 4 hexadecimal digits, with a single value

1.42 NLR Format: NLR= Description: number migration, with a single value. Value range: GSM: The number is migrated only in the CS domain. GPRS: The number is migrated only in the PS domain. BOTH: The number is migrated in both domains.

1.43 VVDN Format: VVDN= Description: voice/video double number service, a string, with a single value. Value: YES, NO

1.44 DEFCALL Format: DEFCALL= Description: default call (including telecom service and bearer service) string, with a single value. Value range: /*telecom service*/ 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

TS11: telephony TS12: emergencyCalls TS21: shortMessageMT_PP TS22: shortMessageMO_PP TS61: facsimileGroup3AndAlterSpeech TS62: automaticFacsimileGroup3 TS63: facsimileGroup4 TSD1: AUXILIARY TELEPHONY /*bearer service*/ BS21: dataCDA_300bps BS22: dataCDA_1200bps BS23: dataCDA_1200_75bps BS24: dataCDA_2400bps BS25: dataCDA_4800bps BS26: dataCDA_9600bps BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE BS2G: general_dataCDA BS31: dataCDS_1200bps BS32: dataCDS_2400bps BS33: dataCDS_4800bps BS34: dataCDS_9600bps BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE BS3G: general_dataCDS BS41: padAccessCA_300bps BS42: padAccessCA_1200bps BS43: padAccessCA_1200_75bps BS44: padAccessCA_2400bps BS45: padAccessCA_4800bps BS46: padAccessCA_9600bps BS51: dataPDS_2400bps BS52: dataPDS_4800bps BS53: dataPDS_4800bps 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format BS61: allAlternateSpeech_DataCDA

INTERNAL

BS62: allAlternateSpeech_DataCDS BS81: allSpeechFollowedByDataCDA BS82: allSpeechFollowedByDataCDS

1.45 RBTINDEX Format: RBTINDEX= Description: CRBT selection code, with a single value. Value range: 0 254 –

1.46 IST_ALERT_TIMER Format: IST_ALERT_TIMER= Description: IST alert timer, with a single value. Value range: 0 255 –

1.47 IST_ALERT_RESPONSE Format: IST_ALERT_RESPONSE= Description: IST alert response, with a single value. Value range: 0 4 –

1.48 UPL_TIME (Dynamic) Format: UPL_TIME= Description: update location time for C S domain, with a single value. Value range: 0 9999999999 –

1.49 PURGE_TIME_ATMSC (Dynamic) Format: PURGE_TIME_ATMSC= Description: purge time for CS domain, with a single value. Value range: 0 9999999999 –

1.50 GPRSUPL_TIME (Dynamic) Format: GPRSUPL_TIME= Description: update location time for P S domain, with a single value. Value range: 0 9999999999 –

1.51 PURGE_TIME_ATSGSN (Dynamic) Format: PURGE_TIME_ATSGSN= Description: purge time for PS domain, with a single value. Value range: 0 9999999999 –

1.52 SUB_AGE Format: SUB_AGE= Description: service age indicator, with a single value. Value range: 0 16777215 –


2014-12-11


[键入文字 ]


INTERNAL

1.53 CATEGORYROUTE Format: CATEGORYROUTE= Description: route category, with a single value. Value range: 1 255 –

1.54 ACR Format: ACR= Description: auto call redirect, with a single value. Value range: 0 255 –

1.55 NRBT_INDEX Format: NRBT_INDEX= Description: NRBT index, with a single value. Value range: 1 65535 –

1.56 ACR_STATUS Format: ACR_STATUS= Description: ACR provision flag, with a single value. Value range: 0 2 –

1.57 STANDBY_IMSI Format: STANDBY_IMSI= Description: a string which contains 16 digits, in a format similar to TBCD.

1.58 EXPIRY_DATE Format: EXPIRY_DATE= Description: expiry Date, with a single value. Value range: 0 9999999999 –

1.59 MCSISTATE Format: MCSISTATE= Description: M_CSI state, a string, with a single value. Value: YES, NO

1.60

OCSISTATE Format: OCSISTATE= Description: O_CSI state, a string, with a single value. Value: YES, NO

1.61

TCSISTATE Format: TCSISTATE= Description: T_CSI state, a string, with a single value. Value: YES, NO

1.62 SMSROUTE(SMSROUTEdata template) Format: SMSROUTE= 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: a numerical string, with a single value. Value range: 0 65534, SMSROUTE data template for subscription –

1.63 EXEXROUTECATEGORY Format: EXEXROUTECATEGORY= Description: extended enhanced category service template, with a single value. Value range: 1 2147483647 –

1.64 PROFILE_ID Format: PROFILE_ID= Description: subscription identifier, with a single value, a string which contains 3 decimal digits. Default value: 1

1.65 EPS_PROFILE_ID Format: EPS_PROFILE_ID= Description: subscription identifier, with a single value, a string which contains 3 decimal digits. Default value: 1

1.66 STNSR Format: STNSR= Description: Session Transfer Number for SRVCC. Value range: 3 15 decimal digits, with a single value –

1.67 APNOI Format: APNOI= Description: APN operator identifier, with a single value. Value range: a string which contains 1 63 digits –

Default value#

1.68 TGPPAMBRMAXUL Format: TGPPAMBRMAXUL= Description: a numerical string, with a single value. Value range: 1 4294967295, user's maximum uplink bandwidth –

1.69 TGPPAMBRMAXDL Format: TGPPAMBRMAXDL= Description: a numerical string, with a single value. Value range: 1 4294967295, user's maximum downlink bandwidth –

1.70 RATFREQSELPRI Format: RATFREQSELPRI= 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: a numerical string, with a single value. Value range: 1 256, radio frequency selection priority –

1.71 PLMNTPLID Format: PLMNTPLID= Description: PLMN roaming restriction template ID, with a single string. Value range: 0 65534 –

1.72 DIAMNODETPL_ID Format: DIAMNODETPL_ID= Description: 0 65534 Diameter roaming restriction template ID, with a single string. Value range: 0 65534 –

–

1.73 LTEAUTOPROV Format: LTEAUTOPROV= Description: Whether the HSS provides long term evolution (LTE) services for a subscriber that has not been defined in the EPS. Value: 

TRUE: The HSS provides LTE services for a subscriber that has not been defined in the EPS, and the HSS notifies the provisioning system of the LTE service provisioning.



FALSE: The HSS does not provide LTE services for a subscriber that has not been defined in the EPS.



AUTOTPLUSER: The convergent HSS uses a template to provide LTE services for a subscriber that has not been defined in the EPS.



AUTOUSER_NN: The HSS provides LTE services for a subscriber that has not been defined in the EPS, but the HSS does not notify the provisioning system of the LTE service provisioning.



AUTOTPLUSER_NN: The convergent HSS uses a template to provide LTE services for a subscriber that has not been defined in the EPS, but the HSS does not notify the provisioning system of the LTE service provisioning. Default value: FALSE

1.74 MPS Format: MPS= Description: Specifies whether the HSS provides the Multimedia Priority Service (MPS) for a subscriber. Value:


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 

TRUE: The HSS provides the MPS for a subscriber.



FALSE: The HSS does not provide the MPS for a subscriber.

INTERNAL

Default value: FALSE

1.75 TAUTIMER Format: TAUTIMER= Description: Specifies whether the HSS updates the routing areas or tracking areas for subscribers. Value range: 0 43200. –

The default value 0 indicates that the HSS does not update the routing areas and tracking areas for subscribers. When the parameter value is changed from a non-zero value to 0, the HSS sends a DSR message to the MME or S4SGSN. 1 43200 (in minutes): It indicates the interval at which th e HSS updates the routing areas or tracking areas for subscribers. –

1.76 SUB_DYN_EPS_ID (Dynamic) Format: SUB_DYN_EPS_ID= Description: EPS dynamic subscription identifier, with a single value, which consists of 3 digits.

1.77 MMEHOST (Dynamic) Format: MMEHOST= Description: MME host address, a string consisting of 1 127 digits, with a single value. –

1.78 MMEREALM (Dynamic) Format: MMEREALM= Description: MME real domain, a string consisting of 1 127 digits, with a single value. –

1.79 SGSNHOST (Dynamic) Format: SGSNHOST= Description: SGSN host name, a string consisting of 1 127 digits, with a single value. –

1.80 SGSNREALM (Dynamic) Format: SGSNREALM= Description: SGSN real domain, a string consisting of 1 127 digits, with a single value. –

1.81 S4SGSNNUM (Dynamic) Format: S4SGSNNUM= Description: S4SGSN number, a string consisting of 1 15 digits, with a single value. –


2014-12-11


[键入文字 ]


INTERNAL

1.82 EPS_IMEI (Dynamic) Format: EPS_IMEI= Description: international mobile equipment identifier, a string consisting of 15digits.

1.83 EPS_IMEISV (Dynamic) Format: EPS_IMEISV= Description: a string consisting of 1 2 digits, in a format similar to TBCD. –

1.84 MMEFEATURELIST (Dynamic) Description: multiple columns Value range: Format: MMEFEATURELIST=--------------------- For details about the enumerated values, see Feature-List AVP in section 7.3.10 of TS 29272.


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format No.

Feature

M/ O

INTERNAL

Description

0

ODB-all-APN

O

Operator Determined Barring of all Packet Oriented Services

1

ODB-HPLMN-APN

O

Operator Determined Barring of Packet Oriented Services from access points that are within the HPLMN whilst the subscriber is roaming in a VPLMN

2

ODB-VPLMN-APN

O

Operator Determined Barring of Packet Oriented Services from access points that are within the roamed to VPLMN

3

ODB-all-OG

4

ODB-all-InternationalOG

O

5

ODB-all-InternationalOGNotToHP LMN-Country

O

Operator Determined Barring of all outgoing international calls except those directed to the home PLMN country

6

ODB-all-InterzonalOG

O

Operator Determined Barring of all outgoing inter-zonal calls

7

ODB-all-InterzonalOGNotToHPL MN-Country

O

Operator Determined Barring of all outgoing inter-zonal calls except those directed to the home PLMN country

8

ODB-all-InterzonalOGAndInternati onalOGNotToHPLMN-Country

O

Operator Determined Barring of all outgoing international calls except those directed to the home PLMN country and Barring of all outgoing inter-zonal calls

9

RegSub

O

Regional Subscription.

10

Trace

O

Trace Function

11

LCS-all-P rivExcep

O

All LCS Privacy Exception Classes

12

LCS-Universal

O

Allow location by any LCS client

13

LCS-CallSessionRelated

O

Allow location by any value added LCS client to which a call/session is established from the target UE

14

LCS-CallSessionUnrelated

O

Allow location by designated external value added LCS clients

15

LCS-PLMNOperator

O

Allow location by designated PLMN operator LCS clients

Operator Determined Barring of all outgoing calls Operator Determined Barring of all outgoing international calls


2014-12-11


[键入文字 ]


INTERNAL

16

LCS-ServiceType

O

Allow location by LCS clients of a designated LCS service type

17

LCS-all-MOLR-SS

O

All Mobile Originating Location Request Classes

18

LCS-BasicSelfLocation

O

Allow an MS to request its own location

19

LCS-AutonomousSelfLocation

O

Allow an MS to perform self location without interaction with the PLMN

20

LCS-TransferToThirdParty

O

Allow an MS to request transfer of its location to another LCS client

21

SM-MO-PP

O

Short Message MO-PP

22

Barring-OutgoingCalls

O

Barring of Outgoing Calls

23

BAOC

O

Barring of all outgoing calls

24

BOIC

O

Barring of outgoing international calls

25

BOICExHC

O

Barring of outgoing international calls except those directed to the home PLMN Country

26

T-ADS Data Retrieval

O

Terminating Access Domain Selection Data Retrieval

Feature bit: The order number of the bit within the Supported-Features AVP, for example "1". Feature: A short name that can be used to refer to the bit and to the feature, for example. "ODB-HPLMN-APN". M/O: Defines if the implementation of the feature is mandatory ("M") or optional ("O"). Description: A clear textual description of the feature.

1.85 SGSNFEATURELIST (Dynamic) Description: multiple columns Value range: Format: SGSNFEATURELIST=---------------错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL ------ See the following table for description NO.0-NO.26 and all description in 7.3.10 Feature-List AVP in section 1.68 TS 29272.

1.86 MMEULRFLAG (Dynamic) Description: multiple columns Value range: Format: MMEULRFLAG=---- Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND Column 2: S6a or S6d identifier, value: S6AORS6D_IND Column 3: subscriber data identifier, value: SKIP_SUBDATA Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND Column 5: node type identifier, value: NODE_TYPE_IND Column 6: initial attachment identifier, value: INIT_ATTATCH_IND Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.

1.87 SGSNULRFLAG (Dynamic) Description: multiple columns Value range: Format: SGSNULRFLAG=------ Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND Column 2: S6a or S6d identifier, value: S6AORS6D_IND Column 3: subscriber data identifier, value: SKIP_SUBDATA Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND Column 5: node type identifier, value: NODE_TYPE_IND Column 6: initial attachment identifier, value: INIT_ATTATCH_IND Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.

1.88 MMETIMESTAMP (Dynamic) 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Format: MMETIMESTAMP=

INTERNAL

Description: MME registration and purge time, with a single value. Value range: 0 9999999999 –

1.89 S4SGSNTIMESTAMP (Dynamic) Format: S4SGSNTIMESTAMP= Description: S4SGSN registration and purge time, with a single value. Value range: 0 9999999999 –

1.90 FWDSUP Format: FWDSUP= Description: forwarding suppression. Value: YES, NO

1.91 ZCLOCK Format: ZCLOCK= Description: Zone cell lock. Value: YES, NO

1.92 MBRCTRL Format: MBRCTRL=& Description: Column 1: DenyDirectCall: Whether the HSS/HLR restricts the direct calls placed to a GROUPSIM member. Value: 1: Deny: cannot receive calls 0: Allow: can receive calls Default value: 0 Column 2: DenySMS: Whether the HSS/HLR restricts the short messages sent to a GROUPSIM member. Value: 1: Deny: cannot receive short messages 0: Allow: can receive shot massages Default value: 0

1.93 PNP Format: PNP=- Description: PNP provision, multiple columns Column 1: Whether to provide the PNP service, value: YES, NO , PNP provision identifier, value: YES, NO


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 2: PNP index, PNP provision identifier, value: 0 99999 –

2 Supplementary Services 2.1CB Format: CB=-- Description: multiple columns Column 1: code of supplementary services of the barring types, a string, with a single value. Value range: BAOC, BOIC, BOICEXHC, BAIC, BICROAM, BOCROAM Column 2: basic service (group), a string, with a single value. Value range: /*telecom service*/ TS10: allSpeechTransmissionServices, TS11 TS20: allShortMessageServices, TS21, TS22 TS60: allFacsimileTransmissionServices, TS61, TS62, TS63 TS70: allDataTeleservices TS80: allTeleservices_ExceptSMS TSD0: allPLMN_SpecificTS, TSD1-TSDF /*bearer service*/ BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46, BS4G BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G BS60: allAsynchronousServices BS68: allSynchronousServices BSD0-BSDF The value is (default) ALL only in the PROVIDE status: The parameter means valid services subscribed by all subscribers. Column 3: supplementary service status, a string, with a single value. Value range: PROV: Provide ACT: ACTIVE_OPERATIVE, activate QUC: ACTIVE_QUIESCENT, sleep 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Note: PROV is the default value.

INTERNAL

2.2CW Format: CW=-- Description: multiple columns Column 1: code of supplementary services of the waiting types, a string, with a single value. Value: CW Column 2: basic service (group), a string, with a single value. Value range: /*telecom service*/ TS10: allSpeechTransmissionServices, TS11 TS20: allShortMessageServices, TS21, TS22 TS60: allFacsimileTransmissionServices, TS61, TS62, TS63 TS70: allDataTeleservices TS80: allTeleservices_ExceptSMS TSD0: allPLMN_SpecificTS, TSD1-TSDF /*bearer service*/ BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46, BS4G BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G BS60: allAsynchronousServices BS68: allSynchronousServices BSD0-BSDF The value is (default) ALL only in the PROVIDE status: The parameter means valid services subscribed by all subscribers. Column: supplementary service, a string, with a single value. Value: PROV: Provide ACT: ACTIVE_OPERATIVE, activate Note: PROV is the default value.

2.3PW Format: PW= 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Description: a numerical string, consisting of 8digits, with a single value

INTERNAL

2.4CONTROL Format: CONTROL= Description: a string, with multiple values. Value range: OPER: operator SUB: subscriber

2.5CONTROLREASON Format: CONTROLREASON= Description: a string, with a single value. Value range: OPER: operator SUB: subscriber

2.6WPA Format: WPA= Description: a numerical string, with a single value.

2.7CF Format: CF=------------------- Description: multiple columns Column 1: code of supplementary services of the forwarding type, a string, with a single value. Value range: CFU: call forwarding unconditional CFB: call forwarding on busy CFNRY: call forwarding on no reply CFNRC: call forwarding on no reachable CFD: default forwarding CFBFTN: CFD replaces CFB forwarded-to number CFNRYFTN: CFD replaces CFNRy forwarded-to number CFNRCFTN: CFD replaces CFNRc forwarded-to number Column 2: basic service code, a string, with a single value. Value range: /*telecom service*/ 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format TS10: allSpeechTransmissionServices, TS11

INTERNAL

TS20: allShortMessageServices, TS21, TS22 TS60: allFacsimileTransmissionServices, TS61, TS62, TS63 TS70: allDataTeleservices TS80: allTeleservices_ExceptSMS TSD0: allPLMN_SpecificTS, TSD1-TSDF /*bearer service*/ BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46, BS4G BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G BS60: allAsynchronousServices BS68: allSynchronousServices BSD0-BSDF The value is (default) ALL only in the PROVIDE status. Column 3: supplementary service status, a string, with a single value. Value range: PROV, REG, ACT, QUC Note: default value: PROV Column 4: forwarding number, a numerical string, consisting of 18 digits, with a single value. The first two digits indicate the number attribute, where 0x81 means an unknown number and 0x91 means an international number. Column 5: NOTIFICATION TO CALLING SUB a string, with a single value. Value: YES, (default) NONE. Column 6: NOTIFICATION TO FORWARDING SUB, a string, with a single value. Value: YES, NO, (default) NONE. Column 7: , a numerical string, consisting of 1 2 digits, with a single value, (default) NONE. –

Column 8: , control of user, a string, with a single value. Value: YES, NO Column 9: , ofa id, a numerical string, with a single value. Value range: 0 65534 –

Column 10: , with a single value, and indicating whether the forwarding number is in the country where the HPLMN is located. Value: YES, NO Column 11: , with a single value, and indicating whether the forwarding number is in the country where the VPLMN is located. Value: YES, NO


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 12: with a single value, and indicating whether the forwarding number is an entertainment number. Value: YES, NO Column 13: with a single value, and indicating whether the forwarding number is an information station number. Value: YES, NO Column 14: with a single value, and indicating whether the forwarding number subscribes to the numbers after TIFCSI. Value: YES, NO Column 15: with a single value, and indicating whether the CFD replaces the CFB service. Value: YES, NO Column 16: with a single value, and indicating whether the CFD replaces the CFNRY service. Value: YES, NO Column 17: with a single value, and indicating whether the CFD replaces the CFNRC service. Value: YES, NO When values of column 15, column 16 and column 17 are all NO, the CFD can replace any CCF. Column 18: with a single value, and indicating whether the CFD service is delivered when the user roams internationally. Value: YES, NO Column 19: with a single value, and indicating whether the Ftn Number is a short Ftn Number. Value: YES, NO Column 20: with a single value, and indicating whether the Ftn Number is a voice mail service number.

2.8DEFOFAID Format: DEFOFAID= Description: a numerical string, with a single value, default OFA ID. Value range: 0 65534 –

2.9GS (Other Supplementary services) Format: GS= Description: a string, with a single value. Value range: CLIP, CLIR, COLP, COLR, MCI, CNAP, ECT, MAH, HOLD, CCBS_A, CCBS_B, AOCC, AOCI, MPTY, HOTBILL, CAPL, PLMNSS1, PLMNSS2, PLMNSS3, PLMNSS4, PLMNSS5, PLMNSS6, PLMNSS7, PLMNSS8, PLMNSS9, PLMNSSA, PLMNSSB, PLMNSSC, PLMNSSD, PLMNSSE, PLMNSSF, ALLPLMNSS, CD, ELCS, CPP, ICSIND, ANCHOR.

2.10 CLIRES Format: CLIRES= Description: CliRestrictionOption, a string, with a single value. Value range: PERM, TEMPRES, TEMPALLOW

2.11 CLIPOC 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Format: CLIPOC=

INTERNAL

Description: ClipOverrideCategory, a string, with a single value. Value: YES, NO

2.12 COLPOC Format: COLPOC= Description: ColpOverrideCategory, a string, with a single value. Value: YES, NO

2.13 CNAPOC Format: CNAPOC= Description: CNAPOverrideCategory, a string, with a single value. Value: YES, NO

2.14 LCS Format: LCS= Description: LCS template number, a string, with a single value. Value range: 0 65534 –

2.15 UUS Format: UUS= Description: UUS signaling point value, a sting, with multiple values. Value range: UUS1: send and receive UUI messages between call origination and call termination UUS2: send UUI messages when hearing the ring tone of the opposite party UUS3: send and receive UUI messages after establishment of communication

2.16 CFSMS Format: CFSMS=------- Description: multiple columns Column 1: supplementary service status, a string, with a single value. Value range: PROV, REG, ACT, QUC Column 2: OFAID with a single value. Value range: 0 65534 –

Column 3: forwarding number, consisting of 3 28 digits, with a single value. The first two digits indicate the number attribute, where 0x81 means an unknown number and 0x91 means an international number. –

Column 4: with a single value, and indicating whether the forwarding number is in the country where the HPLMN is located. Value: YES, NO Column 5: with a single value, and indicating whether the forwarding number is in the country where the VPLMN is located. Value: YES, NO


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 6: with a single value, and indicating whether the forwarding number is an entertainment number. Value: YES, NO Column 7: with a single value, and indicating whether the forwarding number is an information station number. Value: YES, NO Column 8: with a single value, and indicating whether the forwarding number is a mailbox number. Value: YES, NO

2.17 ACC_LENGTH Format: ACC_LENGTH= Description: with a single value, ACC length. Value range: DICR_0: acc length is 0 DICR_1: acc length is 1 DICR_2: acc length is 2 DICR_3: acc length is 3 DICR_4: acc length is 4 DICR_5: acc length is 5 DICR_6: acc length is 6 DICR_7: acc length is 7 DICR_8: acc length is 8 DICR_9: acc length is 9 DICR_10: acc length is 10 DICR_11: acc length is 11 DICR_12: acc length is 12 DICR_13: acc length is 13 DICR_14: acc length is 14 DICR_15: acc length is 15 DICR_16: acc length is 16 DICV: acc length is 127

2.18 CLRBSG Format: CLRBSG=----- Description: multiple columns Column 1: service code. Value range: CLIP: calling line identification presentation


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format CLIR: calling line identification restriction

INTERNAL

COLP: connected line identification presentation COLR: connected line identification restriction Column 2: TS1X, value: YES, NO Column 3: TS2X, value: YES, NO Column 4: TS6X, value: YES, NO Column 5: BS2X, value: YES, NO Column 6: BS3X, value: YES, NO

2.19 MC Format: MC=- Description: multiple columns Column 1: Specifying the maximum number of MC (Multi Call) attempts that the HLR allows, ranging from 2 to 7. Column 2: Specifying the maximum number of MC attempts that the user determines, ranging from 1 to 7.

2.20 UEREACH Format: UEREACH=- Description: multiple columns Column 1: Registered with MME. Value: 0: Not registered 1: Registered Column 2: Registered with SGSN. Value: 0: Not registered 1: Registered

3 Multi-MSISDN 3.1MMSISDN Format: MMSISDN=-----------------------------< AI> Description: multiple columns


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 1: secondary MSISDN number, a numerical string, consisting of 16 digits, with a single value Column 2: basic service of bearer capability, a string, with a single value. Value range: TS11, TS21, TS22, TS61, TS62, TS63, TSD1, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F, BS31, BS32, BS33, BS34, BS3G, BS3F, BS41, BS42, BS43, BS44, BS45, BS46, BS51, BS52, BS53, BS61, BS62, B S81, BS82 Column 3: ITC: Information Transfer Capability, a numerical string, with a single value. Value range: 1: UDI 2: AUDIO 3: FAX 5: RDI 7: ALTFAX NONE (default value) Column 4: RCR: RADIO CHANNEL REQUIREMENT: a numerical string, with a single value. Value range: 0: half rate support only MS 1: full rate support only MS 2: dual rates support MS/half rate preferred 3: dual rates support MS/full rate preferred NONE (default value) Column 5: DC: Data compression: a numerical string, with a single value. Value range: 0: Data compression not possible 1: Data compression possible NONE (default value) Column 6: S: Structure: a numerical string, with a single value. Value range: 0: Service Data Unit integrity 3: Unstructured NONE (default value) Column 7: RA: Rate Adaption: a numerical string, with a single value. Value range: 0: No Rate Adaption 1: V.110, I.460/X.30 Rate Adaption 2: ITU-T X.31 flag stuffing 3: V.120 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 4: H.223 and H.245

INTERNAL

5: PIAFS NONE (default value) Column 8: SAP: Signaling Access Protocol: a numerical string, with a single value. Value range: 1: I.440/450 2: X.21 3: X.28-dedicated PAD, individual NUI 4: X.28-dedicated PAD, universal NUI 5: X.28-non dedicated PAD 6: X.32 NONE (default value) Column 9: SA: Synchronous/Asynchronous transfer: a numerical string, with a single value. Value range: 0: Synchronous 1: Asynchronous NONE (default value) Column 10: NSB: Number of stop bits: a numerical string, with a single value. Value range: 0: 1 bit 1: 2 bits NONE (default value) Column 11: NDB: Number of data bits: a numerical string, with a single value. Value range: 0: 7 bits 1: 8 bits NONE (default value) Column 12: UR: User Rate: a numerical string, with a single value. Value range: 1: 300 bit/s 2: 1200 bit/s 3: 2400 bit/s 4: 4800 bit/s 5: 9600 bit/s


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 6: 12.0 kbit/s transparent (non compliance with X.1 and V.110)

INTERNAL

7: 1.2 kbit/s/75 bit/s Recommendation V.23, (asymmetric) X.1 and V.110. NONE (default value) Column 13: IR: Intermediate Rate: a numerical string, with a single value. Value range: 2: 8 kbit/s 3: 16 kbit/s NONE (default value) Column 14: NICT: NIC on TX: a numerical string, with a single value. Value range: 0: does not require sending data with network independent click 1: requires sending data with network independent clock NONE (default value) Column 15: NICR: NIC on RX: a numerical string, with a single value. Value: 0: cannot accept data with network independent clock 1: can accept data with network independent clock NONE (default value) Column 16: NPB: Parity information: a numerical string, with a single value. Value: 0: Odd 2: Even 3: None (case-sensitive) 4: Forced to 0 5: Forced to 1 NONE (default value) Column 17: CE: Connection Element: a numerical string, with a single value. Value: 0: Transparent 1: Non transparent 2: Both, transparent preferred 3: Both, non transparent preferred NONE (default value) Column 18: MT: Modem Type: a numerical string, with a single value. Value:


2014-12-11


[键入文字 ]


INTERNAL

0: None 1: V.21 2: V.22 3: V.22 bis 4: V.23 5: V.26 ter 6: V.32 7: modem for undefined interface 8: Autobauding type 1 NONE (default value) Column 19: OMT: Other Modem Type: a numerical string, with a single value. Value: 0: No other Modem Type 2: V.34 NONE (default value) Column 20: FNUR: Fixed network User Rate: a numerical string, with a single value. Value: 0: Not applicable 1: 9600 bit/s 2: 14400 bit/s 3: 19200 bit/s 4: 28800 bit/s 5: 38400 bit/s 6: 48000 bit/s 7: 56000 bit/s 8: 64000 bit/s 9: 33600 bit/s 10:32000 bit/s 11:31200 bit/s NONE (default value) Column 21: LA2: a numerical string, with a single value. Value: 6: Recommendation X.25, link level


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL 8: International Organization for Standardization (ISO) 6429, code set 0 (DC1/DC3) 10: videotex profile 1 12: COPNOFLCT (Character oriented protocol with not flow mechanism) 13: X.75 layer 2 modified (CAPI) NONE (default value) Column 22: TM: transfer mode 0: circuit mode 1: packet mode Column 23: DMODE: duplex mode 0: half duplex 1: full duplex Column 24: NIRR: 0: No meaning is associated with this value 1: Data up to and including 4.8kb/s, full rate, non-transparent, 6kb/s radio interface rate is requested Column 25: ACC: Acceptable channel coding 0: None 1: TCH/F 4.8 acceptable 2: TCH/F 9.6 acceptable 3: TCH/F 4.8&9.6 acceptable 8: TCH/F 14.4 acceptable 9: TCH/F 14.4&4.8 acceptable 10: TCH/F 14.4&9.6 acceptable 11: TCH/F 14.4&9.6&4.8 acceptable Column 26: NOTC: Maximum number of traffic channels 0:1 TCH 1:2 TCH 2:3 TCH 3:4 TCH 4:5 TCH 5:6 TCH 6:7 TCH 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

7:8 TCH Column 27: UIMI: 0: User initiated modification not allowed/required/applicable 1: User initiated modification up to 1 TCH/F allowed/may be requested 2: User initiated modification up to 2 TCH/F allowed/may be requested 3: User initiated modification up to 3 TCH/F allowed/may be requested 4: User initiated modification up to 4 TCH/F allowed/may be requested NONE (default value) Column 28: WAIUR: Wanted air interface user rate 0: air interface user rate not applicable 1:9.6 kbit/s 2:14.4kbit/s 3:19.2kbit/s 5:28.8kbit/s 6:38.4kbit/s 7:43.2kbit/s 8:57.6kbit/s NONE (default value) Column 29: ACCEx: Acceptable channel coding extended 0: None 1: TCH/F 43.2 acceptable 2: TCH/F 32.0 acceptable 3: TCH/F 43.2&32.0 acceptable 4: TCH/F 28.8 acceptable 5: TCH/F 43.2&28.8 acceptable 6: TCH/F 43.2&32.0 acceptable 7: TCH/F 43.2&32.0&28.8 acceptable NONE (default value) Column 30: AI: Asymmetry Indication 0, 3: channel coding symmetry preferred 1: downlink biased channel coding asymmetry is preferred 2: uplink biased channel coding asymmetry is preferred 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format NONE (default value)

INTERNAL

3.2ALS Format: ALS= Description: a string consisting of 16 digits, in a format similar to TBCD format.

4 CUG Data 4.1CUG_SUB FormatCUG_SUB=---; Description: CUG subscription data, with multiple columns. Value range Column 1: InterLock: a numerical string consisting of eight digits, with a single value. Value range: 00000000 99999999 –

Column 2: cugIndex: a numerical string, with a single value. Value range: 0 32767 –

Column 3: IntraCUGOptions: a string, with a single value. Value range: NOBAR: no CUG barring ICBAR: barring of CUG incoming calls OCBAR: barring of CUG outgoing calls Default value: NOBAR Column 4: BSGList: basic service group list, a string, with multiple values. Value range: ALL: all basic services /*telecom service*/ TS10: allSpeechTransmissionServices, TS11 TS60: allFacsimileTransmissionServices, TS61, TS62, TS63 /*bearer service*/ BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G

4.2CUG_FEA Format: CUG_FEA=--; Description: CUG feature data, with multiple columns. Value range: Column 1: basic service group, with a single value. Value range: ALL: all basic services /*telecom service*/ 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format TS10: allSpeechTransmissionServices, TS11

INTERNAL

TS60: allFacsimileTransmissionServices, TS61, TS62, TS63 /*bearer service*/ BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G, BS2F BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G Column 2: CUGIndex: a numerical string, with a single value. Value range: 0 32767 –

Column 3: InterCUGRestrictions, a string, with a single value. Value range: CUG: Only CUG calls are allowed OA: Inter-group calls are allowed IA: Inter-group incoming calls are allowed IOA: Inter-group outgoing calls are allowed

5 CAMEL Data 5.1 NTCSI Format: TCSI=------------- Description: with a single value, multiple columns Column 1: value. Value range: COLLECTINFO: collect information, DP2 (OCSI) ROUTESELFAIL: route selection fails, DP4 (OCSI) TAA: Terminating_Attempt_Authorized, DP12. DP12 trigger list contains up to 5 kinds of telecommunications computer service interface (TCSI) code. TBUSY: DP13 (TCSI) TNOANSWER: DP14 (TCSI) Column 2: SCPaddress index, E.164 Format address Column 3: service key, 0 2147483647 –

Column 4: default calls processing. Value range: ContinueCall: continue the call ReleaseCall: release the call 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Column 5: CAMEL service processing capability. Value range:

INTERNAL

PHASE 1, PHASE 2, PHASE 3, PHASE 4 Column 6: VLR_NOTSUPPHASE1: VLR/MSC does not support the CAMEL. Value range: 0: Allow location updates and calling service 1: Allow location updates but bar all the calling service 2: Deny location updates Column 7: VLR_SUPLPORNOTSUPPHASE2: VLR/MSC does not support CAMEL PHASE2. Value range: 0: Use the earlier CAMEL version 1: Allow location updates but bar all the calling service 2: Deny location updates Column 8: VLR_SUPLPORNOTSUPPHASE3: VLR/MSC does not support CAMEL PHASE3. Value range: 0: Use the earlier CAMEL version 1: Allow location updates but bar all the calling service 2: Deny location updates Column 9: VLR_SUPLPORNOTSUPPHASE4: VLR/MSC does not support CAMEL PHASE4. Value range: 0: Use the earlier CAMEL version 1: Allow location updates but bar all the calling service 2: Deny location updates Column 10: GMSC_NOTSUPPHASE1: GMSC does not support CAMEL PHASE2. Value range: 0: Allow the called service 1: Deny all the called service Column 11: GMSC_SUPLPORNOTSUPPHASE2: GMSC does not support CAMEL PHASE2. Value range: 0: Use the earlier CAMEL version 1: Allow the called service 2: Deny all the called service Column 12: GMSC_SUPLPORNOTSUPPHASE3: GMSC does not support CAMEL PHASE3. Value range: 0: Use the earlier CAMEL version 1: Allow the called service 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 2: Deny all the called service

INTERNAL

Column 13: GMSC_SUPLPORNOTSUPPHASE4: GMSC does not support CAMEL PHASE4. Value range: 0: Use the earlier CAMEL version 1: Allow the called service 2: Deny all the called service Column 14: PSICONF: whether the CAMEL user provides subscriber information in SRI flow. Value: YES, NO Column 15: CSI application scope: HPLMN: Return the T-CSI data when the subscriber roams to the HPLMN. FPLMN: Return the T-CSI data when the subscriber roams outside the HPLMN. INTERNATIONAL: Return the T-CSI data when the subscriber roams outside the home country. HPLMNC: Return the T-CSI data when the subscriber roams within the home country. ALL_PLMN: Return the T-CSI data when the subscriber roams to any network.

5.2OCSI Format: OCSI= Description: a numerical string, with a single value. Value range: 0 99999, OCSI data template for subscription –

5.3TCSI Format: TCSI= Description: a numerical string, with a single value. Value range: 0 99999, TCSI data template for subscription –

5.4GPRSCSI Format: GPRSCSI= Description: gprscsi template number, a string, with a single value. Value range: 0 65534 –

5.5SSCSI Format: SSCSI= Description: sscsi template number, a string, with a single value. Value range: 0 65534 –

5.6VTCSI 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Format: VTCSI=

INTERNAL

Description: vtcsi template number, a string, with a single value. Value range: 0 65534 –

5.7DCSI Format: DCSI= Description: dcsi template number, a string, with a single value. Value range: 0 65534 –

5.8SMSCSI Format: SMSCSI= Description: smstcsi template number, a string, with a single value. Value range: 0 99999 –

5.9MTSMSCSI Format: MTSMSCSI= Description: mtsmstcsi template number, a string, with a single value. Value range: 0 99999 –

5.10 UCSI Format: UCSI= Description: ucsi template number, a string, with a single value. Value range: 0 65534 –

5.11 MCSI Format: MCSI= Description: mcsi template number, a string, with a single value. Value range: 0 65534 –

5.12 TIFCSI Format: TIFCSI= Description: whether to subscribe to TIFCSI and with a single value. Value range: YES/NO

5.13 LUCSI Format: LUCSI= Description: LU-CSI template number, a numerical string, with a single value. Value range: 0 65534 –

5.14 IMCSI Format: IMCSI=- Description: multiple columns Value range:


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 1: o-IM-CSI template number, a numerical string, with a single value. Value range: 0 65534; –

Column 2: vt-IM-CSI template number, a numerical string, with a single value. Value range: 0 65534; –

Note: Only a single IMCSI data record exists.

5.15 SHORTNUM Format: SHORTNUM= Description: long numbers and short numbers template, a numerical string, with a single value. Value range: 0 65534 –

5.16 SUBTPL_ID Format: SUBTPL_ID= Description: 0 65534 subscriber template ID, a numerical string, with a single value. Value range: –

5.17 OPTGPRS_TPL_ID Format: OPTGPRS_TPL_ID= Description: OPTGPRS template ID, a numerical string, with a single value. Value range: 0 65534 –

6 GPRS Data 6.1PDPCID Format: PDPCID= Description: a numerical string, with a single value. Value range: 0 254. The field is consistent with the hybrid subscription template number set by the current HLR. For a subscriber, this field cannot appear concurrently with the PDPCONTEXT. –

6.2PDPCONTEXT Format: PDPCONTEXT=---- -------------------------- Description: multiple columns. For a subscriber, this field cannot appear concurrently with PDPCID.


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 1: PdpId, a numerical string, with a single value. Value range: 1 50. Mandatory parameter –

Column 2: Organize, a string, with a single value. Value range: 240 241. Mandatory parameter –

240: ETSI address 241: ITEFaddress Column 3: PDPaddress type, a numerical string, with a single value, mandatory. Value range: When the value of Organize is 240, the values 00, 01 and 02 represent the following meanings: 00: dynamic x.121 address 01: ppp dynamic address 02: OSP IHOSS address When the value of Organize is 241, the values 33 and 87 represent the following meanings 33: dynamic IPV4 address 87: dynamic IPV6 address 141: dynamic IPV4IPV6 address Column 4: whether the address is a dynamic address, a numerical string, with a single value, mandatory. Value range: 0, 1 0: static address 1: dynamic address Column 5: Pdpaddress, a string, with a single value. Value range: a string consisting of 32 digits, optional. Default value: NONE Column 6: a parameter of the delay type, a numerical string consisting of 1 digit, with a single value, optional. Value range: 0 4 –

0: default 1: Delay_Clas_1 2: Delay_Clas_2 3: Delay_Clas_3 4: Delay_Clas_4 Column 7: reliability parameter, a numerical string consisting of 1 digit, with a single value, optional. Value range: 0 5 –

0: default 1: Acknowledged GTP, LLC, and RLC Protected data


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL 2: Unacknowledged GTP Acknowledged LLC and RLC, Protected data 3: Unacknowledged GTP and LLC Acknowledged RLC, Protected data 4: Unacknowledged GTP, LLC, and RLC, Protected data 5: Unacknowledged GTP, LLC, and RLC, Unprotected data Column 8: peak throughput, a numerical string consisting of 1 digit, with a single value. Value range: 0 9 –

0: default 1: Up to 1000 octet/s 2: Up to 2000 octet/s 3: Up to 4000 octet/s 4: Up to 8000 octet/s 5: Up to 16000 octet/s 6: Up to 32000 octet/s 7: Up to 64000 octet/s 8: Up to 128000 octet/s 9: Up to 256000 octet/s Column 9: average throughput, a numerical string consisting of 1 2 digits, with a single value, optional. Value range: 0 31 –

–

0: default 1: 100 octet/s 2: 200 octet/s 3: 500 octet/s 4: 1000 octet/s 5: 2000 octet/s 6: 5000 octet/s 7: 10000 octet/s 8: 20000 octet/s 9: 50000 octet/s 10: 100000 octet/s 11: 200000 octet/s 12: 500000 octet/s 13: 1000000 octet/s 14: 2000000 octet/s 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 15: 5000000 octet/s

INTERNAL

16: 10000000 octet/s 17: 20000000 octet/s 18: 50000000 octet/s 31: Best Effort Column 10: precedence class, a numerical string consisting of 1 digit, with a single value, optional. Value range: 0 3 –

0: default 1: High Priority 2: Normal Priority 3: Low Priority Column 11: accessibility to PLMN, a numerical string consisting of 1 digit, optional. Value range: 0 1 –

0: only accessible APN of HPLMN 1: accessible to APN of VPLMN Column 12: APN site, a string consisting of 63 digits, with a single value, optional. Default value: NONE Column 13: AR: AR priority: a numerical string, with a single value. Value range: 1: High Priority 2: Normal Priority 3: Low Priority NONE Default value: NONE Column 14: TC: Traffic Class: a numerical string, with a single value. Value range 0: Reserved 1: Conversational class 2: Streaming class 3: Interactive class 4: Background class NONE Default value: NONE Column 15: DO: Delivery order: a numerical string, with a single value. Value range:


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 0: Reserved

INTERNAL

1: With delivery order ('yes') 2: Without delivery order ('no') NONE Default value: NONE Column 16: ErrSdu: Delivery of erroneous SDUs: a numerical string, with a single value. Value range: 0: Reserved 1: No detect (' ') –

2: Erroneous SDUs are delivered ('yes') 3: Erroneous SDUs are not delivered ('no') NONE Default value: NONE Column 17: MSS: Maximum SDU size: a numerical string, with a single value. Value range 0: Reserved 1 150:10 1500 octets, using a granularity of 10 octets –

–

151: 1502 octets 152: 1510 octets 153: 1520 octets NONE Default value: NONE Column 18: MaxUp: Maximum bit rate for uplink: a numerical string, with a single value. Value range: 0 254 –

0: Reserved 1 63: n = rate –

64 127: n = (rate 64)/8+64, (rate: 64 568) –

–

–

128 254: n = (rate 576)/64+128, (rate: 576 8640) –

–

–

NONE Default value: NONE Column 19: MaxDown: Maximum bit rate for downlink: a numerical string, with a single value. Value range: 0 254 –

0: Reserved


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 1 63: n = rate

INTERNAL

–

64 127: n = (rate 64)/8+64, (rate: 64 568) –

–

–

128 254: n = (rate 576)/64+128, (rate: 576 8640) –

–

–

NONE Default value: NONE Column 20: RBER: Residual Bit Error Rate: a numerical string, with a single value. Value range: 0: Reserved 1:5*10E 2 –

2:1*10E 2 –

3:5*10E 3 –

4:4*10E 3 –

5:1*10E 3 –

6:1*10E 4 –

7:1*10E 5 –

8:1*10E 6 –

9:6*10E 8 –

NONE Default value: NONE Column 21: SduER: SDU error ratio: a numerical string, with a single value. Value range: 0: Reserved 1: 1*10E 2 –

2: 7*10E 3 –

3: 1*10E 3 –

4: 1*10E 4 –

5: 1*10E 5 –

6: 1*10E 6 –

7: 1*10E 1 –

NONE Default value: NONE Column 22: TD: Transfer delay: a numerical string, with a single value. Value range: 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 0: Reserved

INTERNAL

1 15:10ms 150ms, in 10 ms increments –

–


–


–

NONE Default value: NONE Column 23: TP: Traffic handling priority: a numerical string, with a single value. Value range: 0: Reserved 1: Priority level 1 2: Priority level 2 3: Priority level 3 NONE Default value: NONE Column 24: GMaxUp: Guaranteed bit rate for uplink: a numerical string, with a single value. Value range: 0 254 –

0: Reserved 1 63: n = rate –

64 127: n = (rate 64)/8+64, (rate: 64 568) –

–

–

128 254: n = (rate 576)/64+128, (rate: 576 8640) –

–

–

NONE Default value: NONE Column 25: GMaxDown: Guaranteed bit rate for downlink: a numerical string, with a single value. Value range: 0 254 –

0: Reserved 1 63: n=rate –

64 127: n = (rate 64)/8+64, (rate: 64 568) –

–

–

128 254: n = (rate 576)/64+128, (rate: 576 8640) –

–

–

NONE Default value: NONE Column 26: : PDP context charging characteristics: a numerical string, with a single value. Value range: 0: None charging characteristics


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 1: Hot billing

INTERNAL

2: Flat rate 4: Prepaid service 8: Normal billing 3:3 5:5 6:6 7:7 9:9 ... 253:253 254:254 NONE Default value: NONE, indicating Normal billing Column 27: : Maximum extended bit rate for downlink: a numerical string, with a single value. Value range: 8700k 16000k (with an interval of 100 kbit/s) –

16M 128M (with an interval of 1 Mbit/s) –


NOExtend Default value: NOExtend Column 28: : Maximum extended guaranteed bit rate for downlink: a numerical string, with a single value. Value range: 8700k 16000k (with an interval of 100 kbit/s) –



NOExtend Default value: NOExtend Column 29: : Maximum extended bit rate for uplink: a numerical string, with a single value. Value range: 8700k 16000k (with an interval of 100 kbit/s) –




2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format NOExtend

INTERNAL

Default value: NOExtend Column 30: : Maximum extended guaranteed bit rate for uplink: a numerical string, with a single value. Value range: 8700k 16000k (with an interval of 100 kbit/s) –



NOExtend Default value: NOExtend Column 31: : PDP address of IPV4, a string, with a single value and consisting of 8 digits. Value range: ["0000" "FFFF"] –

Column 32: : standard charging characteristics, characters, with a single value, 4 hexadecimal digits. Value range: ["0000" "FFFF"] –

6.3CHARGE_GLOBAL Format: CHARGE_GLOBAL= Description: a string, with a single value. Value range: NONE: no charging feature HOT: hot charging, realtime charging FLAT: flat charging PREPAID: prepaid NORMAL: ordinary charging 3:3 5:5 6:6 7:7 9:9 ... 151:151 152:152 153:153 ... 253:253 254:254 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

6.4STD_CHARGE_GLOBAL Format: STD_CHARGE_GLOBAL= Description: a string, with a single value, 4 hexadecimal digits. Value range: ["0000" "FFFF"] –

6.5OPTGPRS Format: OPTGPRS=---------< EPS_QOSTPL_ID>---- Description: multiple columns Value range: Column 1: context id. Value range: 1 50 –

Column 2: apntpl id. Value range: 0 65534 –

Column 3: qostpl id. Value range: 0 65534 –

Column 4: the part one of Address Type. Value: 240, 241 240: ETSI address 241: ITEF address Column 5: the part two of Address Type. Value range: 33, 87, 0, 1, 2, 141 When the value of Organize is 240, the values 00, 01, and 02 represent the following meanings: 00: dynamic x.121 address 01: ppp dynamic address 02: OSP IHOSS address When the value of Organize is 241, the values 33, 87, and141 represent the following meanings: 33: dynamic IPV4 address 87: dynamic IPV6 address 141: dynamic IPV4IPV6 address 3: dynamic IPV4_OR_IPV6 address Column 6: PDP Address. Value: ip address or x.25 address format Column 7: Whether to allow accessing the APN of the VPLMN. Value: 1, 0 Column 8: charging characteristics. Value range: 0: None charging characteristics 1: Hot billing 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format 2: Flat rate

INTERNAL

4: Prepaid service 8: Normal billing 3:3 5:5 6:6 7:7 9:9 …

253:253 254:254 Column 9: : PDP address of IPV4, a string, with a single value, consisting of 8 characters Column 10: EPS_QOStempalte number. Value range: 0 65534 –

Column 11: default APN. Value: YES, NO 0: YES 1: NO Column 12: *APN. Value: YES, NO 0: YES 1: NO Column 13: APN type, with a single value. Value range: PS_APN, EPS_APN, BOTH: PS_APN: 1 EPS_APN: 2 BOTH: 3 Column 14: standard charging characteristics, characters, with a single value, 4 hexadecimal digits. Value range: ["0000" "FFFF"] –

6.6OPTGPRSTPLID Format: OPTGPRSTPLID= Description: a numerical string, with a single value. Value range: 0 65534 –

7 FM Data 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

7.1FMSUBTYPE Format: FMSUBTYPE= Description: a string, with a single value. The parameter indicates the role of the user in the FM service. Value range: INITSUB: initial user SUPVSUB: manager user REMOTESUB: GSM virtual remote user

7.2INITSUB Format: INITSUB= Description: initial subscriber, a string, with a single value. Value range: 0 1 –

7.3SUPVSUB Format: SUPVSUB= Description: supervise subscriber, a string, with a single value. Value range: 0 1 –

7.4FMSUBCOR Format: FMSUBCOR=--------- Description: FM subscriber corset, multiple columns. The parameter exists only if FMSUBTYPE is INITSUB or SUPVSUB. Each column has the same range: 0 254. Default value: 255. –

7.5AUTHREMOTE Format: AUTHREMOTE=- Description: FM authorized remote number, multiple columns. Value range: Column 1: authorized remote number, a string with 15 digits, in a format similar to TBCD format. Column 2: authorized type, value range: INITSUB: initiating subscriber SUPVSUB: supervisor

7.6REGREMOTE Format: REGREMOTE=-------- 错误！未知的文档属性名称

2014-12-11


[ 键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: registered remote number information, multiple columns Column 1: registered remote number, a string consisting of 16 digits, in a format similar to TBCD format Column 2: a string that describes the function of the remote number, with a single value, optional, and consisting of 60 digits. Default value: NONE Column 3: remote number type. Value: DUMMYRM: dummy remote; GSMRM: GSM remote Column 4: function entity address, a numerical string consisting of 1 15 15 digits, with a single value –

Column 5: Corset of the remote numbers. Value Value range: 1 254. 254. Default value: –

255 Column 6: Corset of the remote numbers. Value Value range: 1 254. 254. Default value: –




255

8 EIN Data 8.1EIN 8.1 EIN Format: EIN=-Description: EIN=-Description: multiple columns Column 1: service type. Value range: EOCSI: EOCSI service ETCSI: ETCSI service BEOCSI: BEOCSI service EOICK: EOICK service Column 2: service key, a numerical string, with a single value. Value Value range: 0 999 999 –

9 Multi-IMSI Data 9.1MIMSI 9.1 MIMSI Format: MIMSI=--------_SMS>错误！未知的文档属性名称

2014-12-11


[ 键入文字 ]

HLR Subscriber Data in Huawei Standard Format -

INTERNAL

Description: Multi-IMSI data is exported by IMSI and each IMSI data occupies only one line. Value range: Column 1: IMSI number, with a numerical string consisting of 16 digits, in a format similar to TBCD format Column 2: user type. Value range: MULTIIMSI: multi IMSI user ORDERLYRING: OrderlyRing user SIMULTANEOUSRING: SimultaneousRing user ONELIVE: OneLive user Column 3: subscription serial number. Value range: 1 9 –

Column 4: connection sequence number. Value range: 1 9 –

Column 5: IMSI used to receive short messages. Value range: 1 9 –

Column 6: IMSI used for the VOBB service. Value range: 0 9 –

Column 7: Index of the IMSI contained in the latest successful PSI response

9.2VOICE 9.2 VOICE Format: VOICE=- BER>- Description: multiple columns Column 1: voice mailbox number, a numerical string consisting of 1 15 15 digits –

Column 2: voice mailbox index. Value Value range: 1 2 digits –

10 LINKSIM Data 10.1 SIMSI Format: SIMSI= Description: a numerical string consisting of 16 digits, in a format similar to TBCD format. Value: IMSI number of the bound user

11 OKSC Data 11.1 OKSC Format: OKSC= Description: a numerical string, with a single value. Value Value range: 0-65534, OKSC data template for subscription.


2014-12-11


[ 键入文字 ]


INTERNAL

12 Nokia Private Service SMS INAP Subscription Subscription Data 12.1 NSMSIN (NSMSIN (NSMSIN Data) Format: NSMSIN=---------- AMM>-- Description: multiple columns, with a single value Column 1: SCP address, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 2: NSMSIN service key. Value range: 1 2147483647 2147483647 –

Column 3: detecting point (MO), which specifies whether the IN service is triggered when the SMS is originated. Value: YES, NO Column 4: detecting point (MT), which specifies whether the IN service is triggered when the SMS is terminated. Value: YES, NO Column 5: detecting point (SR), which specifies whether the IN service is triggered when the status report is delivered. Value: Value: YES, NO Column 6: TAMM, which specifies whether all short messages can be triggered. Value: YES, NO Column 7: STATUS, which specifies the status of the SMS INAP service. Value: NOTPROV, NOTPROV, PROV, PROV, ACT

13 COMISDN Service or Multi-SIM Service Subscription Data Data of other vendors must be migrated by running the COMISDN command.

13.1 COMISDN (COMISDN Data) Format: COMISDN=-- VERIDE> Description: COMISDN service group number, multiple columns, with a single value Column 1: COMISDN, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 2: OVERIDE, which specifies the COMISDN override enable. Value: Value: YES, NO

13.2 OWNISDN (OWNISDN Data) Format: OWNISDN= OWNISDN=--- Description: multiple columns, with multiple records


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Column 1: auxiliary number, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 2: Terminating Call Right (TCR) of GROUPSIM members, which specifies whether the called subscriber is allowed to receive a call o r short message. Value: PCALL: 1 (default value), allowed to receive a call or short message NCALL: 0, not allowed to receive a call or short message Column 3: serial number of the auxiliary number, which is automatically generated to 1 9 –

The primary number is fixed to 1 and the default value is 255.

13.3 MSIM (Subscribing to Multi-SIM Service) Format: MSIM=---------- - Description: multiple columns, with multiple records Column 1: E multi-IMSI subscriber type. Value: ACTBYUPL: considering the subscriber who performs the latest location update as the activated subscriber ACTBYUSSD: considering the subscriber who conducts a USSD operation for activating itself as the activated subscriber Sequential Parallel Parallel_preferred MISDN: Multi-MSISDN Column 2: MSISDN activation code, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 3: no answer time for parallel alerting. Value range: 0 255 –

Column 4: no answer time for sequential alerting. Value range: 0 255 –

Column 5: user type. Value range: 0 254 –

Column 6: tone type. Value: Basic_Tone, Intelligent_Tone Column 7: call-forwarding suppression. Value: YES, NO Column 8: sms activation MSISDN, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 9: voice activation MSISDN, which contains a string of 1 to 15 digits, in a format similar to TBCD Column 10: whether to support synchronization. Value: 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Allowed (1)

INTERNAL

Denied (0): default value Column 11: MMS activation MSISDN, which contains a string of 1 to 15 digits

13.4 LCS Activation MEMBERISDN, Which Contains a String of 1 to 15 Digits (MEMBERISDN Data) Format: MEMBERISDN=- Description: multiple columns Column 1: multi-SIM member MSISDN, which contain a string of 1 to 15 digits, in a format similar to TBCD Column 2: member order. Value range: 0 8, 0 means not to activate the MSISDN of a member –

Note: Multiple records are made.

13.5 GROUPISDN (GROUPISDN Service Status) Format: GROUPISDN=-- Description: multiple columns, with a single value Column 1: group MSISDN. Column 2: whether to support synchronization. Value: Denied (0): not support (default) Allowed (1): support Column 3: whether to deny the USSD operation. Value: Denied (0): deny Not_Denied (1): not deny Not_Support (255): default

14 MSM Service Subscription Data 14.1 M2M Format: M2M= Description: whether to provide the service of reporting subscriber's status to the M2M platform. Value: PROV, NOTPROV

14.2

USERCATEGORY Format: USERCATEGORY= Description: Specifies whether a subscriber is an M2M or normal subscriber. Value: NORMAL, M2M 错误！未知的文档属性名称

2014-12-11


[键入文字 ]


INTERNAL

14.3 IMEIBIND Format: IMEIBIND=- Description: multiple columns Column 1: IMEIID, for internal use only, which is set to 1 Column 2: IMEI that has been bound with an IMSI, which contains a string of 1 to 14 digits, in a format similar to TBCD Note: Multiple records are made.

15 EPS Service Subscription Data 15.1 EGR Format: EGR=- Description: multiple columns Column 1: whether to provide the EGR service, that is, whether HSS can interwork with HLR. Value: YES, NO Column 2: HLR serial number corresponding to the EGR service. Value range: 0 255 –

Note: A single record is made.

15.2 NON3GPP Format: NON3GPP=------- Description: multiple columns Column 1: whether to support the Non-3GPP attribute subscription. Value: YES, NO Column 2: restriction on Non-3GPP wireless access. Wireless Local Area Network is not allowed. Value: YES, NO Column 3: restriction on Non-3GPP wireless access. CDMA2000_1X access network is not allowed. Value: YES, NO Column 4: restriction on Non-3GPP wireless access. High-speed data packet is not allowed. Value: YES, NO Column 5: restriction on Non-3GPP wireless access. Super mobile broadband is not allowed. Value: YES, NO Column 6: restriction on Non-3GPP wireless access. Extended high-speed data packet is not allowed. Value: YES, NO Column 7: the capability of Non-3GPP Gate Way (GW) for supporting mobile IP. Value: 错误！未知的文档属性名称

2014-12-11


[键入文字 ]



HLR Subscriber Data in Huawei Standard Format INTERNAL MIP6_INTEGRATED (1): support Mobile IPv6 integrated scenario bootstrapping functionality



PMIP6_SUPPORTED (2): instruct the Non-3GPP GW to use PMIPV6



IP4_HOA_SUPPORTED (4): instruct the Non-3GPP GW to authorize the UE to use IPV4-HOA



ASSIGN_LOCAL_IP (8): instruct the Non-3GPP GW to assign local IP addresses to subscribers



MIP4_SUPPORTED (16): instruct the Non-3GPP GW to use MIPv4



GTPv2_SUPPORTED (32): instruct the Non-3GPP GW to use GTPv2

Column 8: the timeout period of the next Diameter message in Non-3GPP access mode. The unit is second. Value range: 1 4294967295 –

Note: A single record is made.

16 PS_PDP Service Subscription Data 16.1 PSSER Format: PSSER=------ Description: in multiple lines and columns Column 1: PROFILE_ID, a decimal number of 3 digits Column 2: PDP context ID. Value range: 1 50 –

Column 3: PS APNQOS template ID. Value range: 0 65534 –

Column 4: HLR_INDEX, a single value. Value range: 0 255 –

Column 5: PDP other address. Value range: a string of 0 to 39 digits Column 6: PDP other address indicator. Value: STATIC: static address DYNAMIC: dynamic address Column 7: PDP IPV4 address. Value range: a string of 0 to 39 digits

17 EPS_PDN Service Subscription Data 17.1 EPSSER Format: EPSSER=--- --- 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format Description: multiple columns

INTERNAL

Column 1: PROFILE_ID, a decimal number of 3 digits Column 2: PDN context ID. Value range: 1 50 –

Column 3: EPS APNQOS template ID. Value range: 0 65534 –

Column 4: HLR_INDEX, a single value. Value range: 0 255 –

Column 5: PDN other address. Value range: a string of 0 to 39 digits Column 6: PDN other address indicator. Value: STATIC: static address DYNAMIC: dynamic address Column 7: PDN IPV4 address. Value range: a string of 0 to 39 digits Column 8: whether to be the default contextid. Value: 1: Yes 0: No

18 SCPBWADDR Service Subscription Data 18.1 SCPBWADD_DATA Format: SCPBWADD_DATA=---< ALLOW_CF>-- Description: in multiple lines and columns Column 1: SCP address. Value range: a string of 1 to 15 digits Column 2: whether to be allowed to send OCSI. Value: YES: allowed NO: not allowed Column 3: whether to be allowed to send TCSI. Value: YES: allowed NO: not allowed Column 4: whether to be allowed to send CF. Value: YES: allowed NO: not allowed Column 5: whether to be allowed to send CB. Value: YES: allowed 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format NO: not allowed

INTERNAL

Column 6: whether to be allowed to send ODB. Value: YES: allowed NO: not allowed

19 Other Service Subscription Data 19.1 ARD Format: ARD= Description: restriction on user-network access, in a single column, with a single value. Value: UTRAN&GERAN: not allow subscribers to access the 3G and 2G network UTRAN: not allow subscribers to access the 3G network GERAN: not allow subscribers to access the 2G network PROV: allow subscribers to access the 2G and 3G network

19.2 ARD_EXT Format: ARD_EXT=--- Description: supplementary restriction on user-network access, multiple columns, with a single value. Value: Column 1: GANALLOWED, GANNOTALLOWED GANALLOWED: allow subscribers to access GAN GANNOTALLOWED: not allow subscribers to access GAN Column 2: IHSPAEALLOWED, IHSPAENOTALLOWED IHSPAEALLOWED: allow subscribers to access IHSPAE IHSPAENOTALLOWED: not allow subscribers to access IHSPAE Column 3: EUTRANALLOWED, EUTRANNOTALLOWED EUTRANALLOWED: allow subscribers to access EUTRAN EUTRANNOTALLOWED: not allow subscribers to access EUTRAN Column 4: N3GPPALLOWED, N3GPPNOTALLOWED N3GPPALLOWED: allow subscribers to access Non-3GPP N3GPPNOTALLOWED: not allow subscribers to access Non-3GPP

19.3 CAPR Format: CARP= 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: a string of digits, with a single value. The subscription information of priority services is reserved in the CS distribution. The value indicates the priority. Value range: 1 255 –

19.4 MAX_PRIORITY Format: MAX_PRIORITY= Description: the subscribed highest eMLPP priority. Value range: 0 6 –

19.5 DEF_PRIORITY Format: DEF_PRIORITY= Description: the subscribed default eMLPP priority. Value range: 0 6, no greater than –

the highest priority

19.6 EMLPP_COU Format: EMLPP_COU= Description: subscribed eMLPP control attribute. Value: OPERATOR: Default eMLPP priority is controlled by operators. SUBSCRIBER: Default eMLPP priority is controlled by operators or

subscribers.

19.7 VBSR Format: VBSR= Description: a single value. The Voice Broadcast Service indicates whether subscribers can originate VBS group calls when roaming to another network. Value: PROV: Subscribers can originate VBS group calls when roaming to another network. Default: Subscribers cannot originate VBS group calls when roaming to another network.

19.8 VGCSR Format: VGCSR=

Description: a single value. The Voice Group Call Service indicates whether subscribers can originate VGCS group calls when roaming to another network. Value: 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL PROV: Subscribers can originate VGCS group calls when roaming to another network. Default: Subscribers can originate VGCS group calls when roaming to another network.

19.9 VBS_GIDLIST Format: VBS_GIDLIST=-&-

…

Description: VBS service information, multiple columns, with multiple values and a maximum of 50 - combinations Note: The definition does not conform to the standard Huawei format and is reserved for the consideration of compatibility.

19.10 VGCS_GIDLIST Format: VGCS_GIDLIST=&... Description: VGCS service information, in a single column, with multiple values and a maximum of 50 Note: The definition does not conform to the standard Huawei format and is reserved for the consideration of compatibility.

19.11 VBS Format: VBS= Description: VBS service subscription information, with a single value PROV: subscribing to the VBS service

19.12 VGCS Format: VGCS= Description: VGCS service subscription information, with a single value PROV: subscribing to the VGCS service

19.13 ECATEGORY Format: ECATEGORY=- 错误！未知的文档属性名称

2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: multiple columns Ecatoption is optional for a single subscriber. Column 1: enhanced subscriber category, which contains a string of digits. Value range: 0 254 –

Column 2: enhanced category extension, which contains a string of digits. Value range: 0 127 –

19.14 RRR_TPL_ID Format: RRR_TPL_ID=

Description: the subscribed Zone Code template ID, which contains a string of digits, with a single value. Value range: 0 9999 –

Correlation: RRR_TPL_ID is related to SUBRES and becomes effective only when SUBRES is set to RRTEMPLATE.

19.15 NIR Format: NIR= Description: the subscribed NIR index, which contains a string of digits, with a single value. Value range: 0 999 –

19.16 STANDBY_IMSI_EXT Format: STANDBY_IMSI_EXT=-- Description: multiple columns Column 1: backup card of the automatic IMSI change service. Value range: a string of 5 to 16 digits, in a format similar to TBCD Column 2: original card of the automatic IMSI change service. Value range: a string of 5 to 16 digits, in a format similar to TBCD Column 3: a single value, which contains a hexadecimal string of 16 digits

19.17 FRAUDTPL_ID Format: FRAUDTPL_ID=


2014-12-11


[键入文字 ]

HLR Subscriber Data in Huawei Standard Format INTERNAL Description: subscribed anti-fraud template ID, a single value, which contains a string of digits

19.18 CA Format: CA=-- Description: charging area based on the regional charging function, multiple columns Column 1: charging area 1. Value range: 1 9999 –

Column 2: charging area 2. Value range: 1 9999 –

Column 3: charging area 3. Value range: 1 9999 –

20 Authentication Data Format Design 1.

Format: IMSI KI K4_INDEX ALGORITHM CARD_TYPE OPC OP_INDEX USED_FLAG SID AMF_INDEX MIMSI_FLAG

Every authentication data occupies a line and contains IMSI, KI, K4, etc. Values are separated with a space. 2.

If the value of a service is empty, use @ to fill it.

20.1 Authentication Data 20.1.1 Column 1 Description: IMSI, which contains a string of 1 to 16 digits

20.1.2 Column 2 Description: KI, which contains a string of 1 to 32 digits

20.1.3 Column 3 Description: K4 serial number used for encrypting the KI. Value range: 1 254 –

20.1.4 Column 4 Description: Authentication algorithm, a string, with a single value. Value: 1: COMP128-1 2: COMP128-2 3: COMP128-3


2014-12-11


[键入文字 ]


INTERNAL

5: XOR 6: CAVE38 7: CUSTOM_2 8: CUSTOM_3 127: CUSTOM_1 128: MILENAGE 129: MILENAGE_2

20.1.5 Column 5 Description: type of the user card 0: SIM card 1: USIM card

20.1.6 Column 6 Description: OPC, which contains a string of 32 digits in the format of the positive BCD code

20.1.7 Column 7 Description: OP index. Value range: 1 16777215 –

20.1.8 Column 8 Description: USED_FLAG, a single value. Value range: 0 1 –

0: The subscriber is not defined. 1: The subscriber is defined.

20.1.9 Column 9 Description: SID, a single value, with a string of 16 hexadecimal digits, in the format of the BCD code

20.1.10

Column 10 Description: AMF_INDEX. Va lue range: 0 65535 –

20.1.11

Column 11 Description: Authentication data of the primary number in the multi-IMSI service and multi-Profile service 0: No 1: Yes

20.1.12

Column 12 错误！未知的文档属性名称

2014-12-11


hss9860-v900r008-hlr-subscriber-data-in-huawei-standard-format.pdf

Recommend Documents