Percobaan untuk menyetel Mikrotik routerFull description
Full description
Mangle pada Mikrotik Router
This article is my work for english lesson when i was a first semester student. This article describe how to build your own wifi management using MikroTik.
Bypass Cybeer
conexion tubo placa tubular
conexion tubo placa tubularDescripción completa
Descripción: CXVCZVCXCXCV
CCNSP
Modeling a Pin Connection Between Crossing Members
The connection is one of continuity and the gaining of understanding of the external world.Full description
Descripción completa
Master's thesis connecting Poetry & Branding. Contents of this file are owned by the author. Please seek permission before reprinting or reproducing.Full description
full bookFull description
full book
The connection between the DeSantis family and the Gateway supermarket chain explored. The Gateway supermarkets were owned by Manson Family murder victim Leno LaBianca. This research was tri…Full description
Difference between sale and agreement to sell- under Transfer of PropertyFull description
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Applicable Version: 10.00 onwards Scenario Establish IPSec VPN connection between Cyberoam and Mikrotik router using Preshared Key authentication.
Microtik Configuration Administrator access required to add or modify configuration in Mikrotik.
Step 1: Configure IPSec Proposal Go to IP > IPSec > Proposal and click Add New to create an IPSec proposal for the VPN tunnel as shown below. Parameters Enabled
Value Checked
Name
proposal1
Auth. Algorithms
sha1
Encr. Algorithms
3des
Lifetime
00:30:00
PFS Group
modp1024
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Click Apply and then OK to create the IPSec Proposal.
Step 2: Configure Peer Navigate to IP > IPSec > Peer and click Add New to configure Peer/ Remote Device (here, Cyberoam) as shown in the image.
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Parameters Enabled
Value Checked
Address
1.1.1.1
Port
sha1
Auth. Method
pre shared key
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router Secret
cyberoam
Policy Group
default
Exchange Mode
main
Send Initial Contact
Checked
Proposal Check
Obey
Hash Algorithm
sha1
Encryption Algorithm
3des
DH Group
modp1024
Generate Policy
no
Lifetime
04:00:00
DPD Interval
disable DPD
DPD Maximum Failures
5
Step 3: Configure IPSec Policy Navigate to IP > IPSec > Policy and click Add New to create IPSec policy as shown in the table below. Parameters
Value
Enabled
Checked
Src. Address
172.16.1.0/24
Dst. Address
192.168.110.0/24
Protocol
255(All)
Action
encrypt
Level
require
IPSec protocols
esp
Tunnel
Checked
SA Src. Address
2.2.2.2
SA Dst. Address
1.1.1.1
Proposal
proposal1
Priority
0
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Step 4: Configure NAT policy Navigate to Firewall > NAT and click Add New to create NAT policy. Specify the following parameters: Parameters Source Address
Value 172.16.1.0 (Mikrotik’s LAN IP Address)
Destination Address
192.168.110.0/24 (Cyberoam’s LAN IP Address)
Action
Accept
Click Apply and OK to save. The following screen will be displayed.
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Cyberoam Configuration You must be logged on to the Web Admin Console as an administrator with Read-Write permission for relevant feature(s). To configure IPSec Connection in Cyberoam, follow the steps given below.
Step 1: Configure IPSec Connection Go to VPN > IPSec > Connection and click Add to create a new connection using parameters given below. Parameter
Value
Description
Name
IPSec_CR_Mikrotik
Name to identify the IPSec Connection Select Type of connection.
Connection Type
Site to Site
Available Options:
Policy
DefaultBranchOffice
Remote Access Site to Site Host to Host
Select policy to be used for connection Select the action for the connection.
Action on VPN Restart
Initiate
Available options:
Respond Only Initiate Disable
Authentication details Authentication Type
Preshared Key
Select Authentication Type. Authentication of user depends on the connection type.
Preshared Key
Cyberoam
Specify the Preshared Key
PortB-1.1.1.1
Select local port which acts as end-point to the tunnel
Endpoints Details Local
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Remote
2.2.2.2
Specify Gateway IP Address assigned to Cradle Point router.
Local Network Details 192.168.1.0/24 Local Subnet
Select Local LAN Address. Add and Remove LAN Address using Add Button and Remove Button
Remote Network Details Remote LAN Network 172.16.1.0.0/24
Click OK to create the connection.
Select/specify IP address of Cradle Point local network.
How To – Establish IPSec VPN connection between Cyberoam and Mikrotik router
Step 3: Activate IPSec Connection Go to VPN > IPSec > Connection and click under Active and Connection heads against IPSec_CR_Mikrotik connection, created in Step 1
Under the Active status indicates that the connection is successfully activated. Under the Connection status indicates that the connection is successfully established.