Product Specifications HBXX HBXX--3817TB1 --VTM VTM Andrew® Twin Beam Capacity Antenna, 1710–2180 MHz, 2x 38° horizontal beamwidth, RET compatible l
Enhances network capacity through six sectors site application with only three antenna faces
l
Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresite
l
Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
l
Reduces antenna count to minimize Cap- Ex and Op - Ex costs
l
High gain with excellent sector edge roll- off and azimuth sidelobe suppression
l
Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
l
The values presented on this datasheet have been calculated based on N- P - BASTA White Paper version 9.6 by the NGMN Alliance
Electrical Specifications Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB
1710–1880 18. 9 ±0.4 0 ° | 18.7
Gain by Beam Tilt, average, dBi Beam Centers, Horizontal, degrees Bea mwidth , Horizon tal , degre es Beamwidth, Horizontal Tolerance, degrees Beamwidth, Ve rtical, degree s Beamwidth, Vertical Tolerance, degrees Beam Tilt, degrees Horizon tal Sidelobe, dB USLS, dB Gain Roll- off at Boresite, dB Gain Roll- off at Boresite Tolerance, dB Front- to - Back Total Power at 180° ± 30°, dB I so l a t i o n , d B VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Inpu t Power per Port, ma ximu m, wa tts Polarization Impe dan ce L i g h t n i n g P r ot e c t i o n
1850–1990 1 9. 1 ±0.4 0 ° | 18.9
1920–2180 19. 3 ±0.6 0 ° | 19.3
5 ° | 19.0
5 ° | 19.2
5 ° | 19.5
10 ° | 18.9
10 ° | 19.1
10 ° | 19.0
±27 38 ±1.5 7 .5 ±0.4 0–10 20 20 9 ±2 30 30
±27 36 ±1.3 7 .1 ±0.3 0–10 20 20 9 ±2 31 30
±27 34 ±2.2 6 .7 ±0.5 0–10 20 21 9 ±2 29 30
1 . 4 | 1 5. 6
1 . 4 | 15. 6
1 . 4 | 15 .6
-150 250 ± 45° 50 ohm d c G ro u n d
-150 250 ±45° 50 ohm dc Ground
-150 250 ±45° 5 0 oh m dc Ground
General Specificati Specifications ons Antenna Brand
Andrew®
Antenna Type
DualPol® twin beam
Band
Single band
Brand
DualPol®
Operating Frequency Band
1710 – 2180 MHz
| Teletilt®
©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com www.commscope.com www.commscope.com for the most current information. Revised: October 14, 2013
Page 1 of 5 O ct ctober ober 17, 20 2013 13
Product Specifications HBXX -3817TB1-VTM
Mechanical Specifications Color
Light gray
Connector Interface
7- 16 DIN Female
Connector Location
Bottom
Connector Quantity, total
4
Lightning Protection
dc Ground
Radiator Material
Low loss circuit board
Radome Material
Fiberglass, UV resistant
Wind Loading, maximum
438.0 N @ 150 km/h 98.5 lbf @ 150 km/h
Wind Speed, maximum
241.0 km/h |
149.8 mph
Dimensions Depth
181.0 mm | 7.1 in
Length
1390.0 mm |
Width
301.0 mm | 11.9 in
Net Weight
16.5 kg |
54.7 in
36.4 lb
Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 1.1 Actuator HBXX - 3817TB1 - R2M Model with Factory Installed AISG 2.0 Actuator HBXX - 3817TB1 - A2M RET System
Teletilt®
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
Included Products DB380 — Pipe Mounting Kit for 2.4" - 4.5" (60 - 115mm) OD round members on wide panel antennas. Includes 2 clamp sets and double nuts. DB5083 — Downtilt Mounting Kit for 2.4" -4.5" (60 - 115 mm) OD round members. Includes a heavy- duty, galvanized steel downtilt mounting bracket assembly and associated hardware. This kit is compatible with the DB380 pipe mount kit for panel antennas that are equipped with two mounting brackets.
©2013
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com www.commscope.com for the most current information. Revised: October 14, 2013
Page 2 of 5 O ct ctober ober 17, 20 2013 13
Product Specifications HBXX -3817TB1-VTM
Horizontal Pattern
©2013
Vertical Pattern
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com www.commscope.com for the most current information. Revised: October 14, 2013
Page 3 of 5 O ct ctober ober 17, 20 2013 13
Product Specifications DB380 Pipe Mounting Kit for 2.4" -4.5" (60-115mm) OD round members on wide panel antennas. Includes 2 clamp sets and double nuts.
General Specifications Antenna Brand
Andrew®
Mount Type
Pipe mounts
Application
Outdoor
Includes
Brackets |
Package Quantity
2
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum 61.0 mm | 2.4 in Net Weight
2.8 kg | 6.2 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
©2013
Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013
Page 4 of 5 O ct ctober ober 17, 20 2013 13
Product Specifications DB5083 Downtilt Mounting Kit for 2.4" -4.5" (60 - 115 mm) OD round members. Includes a heavyduty, galvanized steel downtilt mounting bracket assembly and associated hardware. This kit is compatible with the DB380 pipe mount kit for panel antennas that are equipped with two mounting brackets.
General Specifications Antenna Brand
Andrew®
Mount Type
Downtilt mounts
Application
Outdoor
Includes
Brackets |
Package Quantity
1
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum 61.0 mm | 2.4 in Net Weight
2.2 kg | 4.9 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
©2013
Classification Compliant by Exemption Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013
Page 5 of 5 O ct ctober ober 17, 20 2013 13
